Displaying publications 21 - 40 of 279 in total

Abstract:
Sort:
  1. Wui NB, Ahmad Anuar MA, Abdul Wahid AM
    Malays J Med Sci, 2020 Jul;27(4):64-71.
    PMID: 32863746 MyJurnal DOI: 10.21315/mjms2020.27.4.6
    Background: The management of fractures around the knee in the elderly population can be challenging due to the complexity of the patients and the fracture characteristics. In this study, we aimed to investigate the short-term outcome of elderly patients who had fractures around the knee and who were treated with primary total knee arthroplasty. The study included patients who were at least 70 years old with poor bone quality and who presented with a fracture around the knee that would be difficult to treat with open reduction and internal fixation (ORIF) as well as patients who were at least 55 years old presenting with severe concomitant knee osteoarthritis.

    Methods: This is a cross-sectional study in which all the elderly patients who underwent early primary total knee replacement due to trauma around the knee at the Segamat Hospital between January 2015 and June 2019 were identified. Data were collected from clinical and operative notes. The clinical outcomes of these patients were evaluated by the range of motion of the knee and the Knee Society Score (KSS).

    Results: Ten patients were identified to have undergone this procedure. Six patients sustained supracondylar femur fractures, two patients had tibial plateau fractures and two patients had concurrent supracondylar femur and tibial plateau fractures. The mean follow-up duration was 22.3 ± 13.9 months, the mean knee score was 87.7 ± 10.0 and the mean functional knee score was 56 ± 41.9.

    Conclusion: In this cohort, good short-term outcomes close to pre-fracture condition was noted in patients who did not suffer from any complications during the post-operative period. Two patients who had surgical site infection had lower functional knee scores. Another two patients with lower knee scores experienced surgical site infection of the distal tibia and contralateral fixed flexion deformity of the knee. Early primary total knee replacement remains a viable option in treating fractures around the knee in the elderly. Infection, which in this study affected 20% of the patients, is the main deterring factor in performing this procedure.

    Matched MeSH terms: Range of Motion, Articular
  2. Bashaireh KM, Yabroudi MA, Nawasreh ZH, Al-Zyoud SM, Bashir NB, Aleshawi AJ, et al.
    Knee, 2020 Aug;27(4):1205-1211.
    PMID: 32711883 DOI: 10.1016/j.knee.2020.05.003
    BACKGROUND: A high incidence of joint laxity has been reported among Asians compared with Western populations, but clear differences between more specific ethnic populations have not been established. This study aimed to determine the average knee laxity in the Malaysian and Jordanian populations.

    METHODS: Jordanian and Malaysian medical students from our institution were invited to participate in the study. General demographic data and factors affecting joint laxity were obtained from each participant using a printed questionnaire. Both knees were examined using the anterior drawer test while in 90° of flexion. Knee laxity was measured by three separate independent investigators through a knee laxity tester.

    RESULTS: One hundred and eighty-six participants (95 females) were enrolled in the study. Among them, 108 Malaysians participated. The Jordanians had significantly higher knee laxity in both knees compared with the Malaysians. The mean average right knee laxity for Jordanians was 2.98 mm vs. 2.72 mm for Malaysians (P = 0.005). Similarly, the mean average left knee laxity for Jordanians was 2.95 mm, while for Malaysians, it was 2.62 mm (P = 0.0001). Furthermore, smokers had significantly more laxity in both knees. After performing a multivariate linear regression analysis for all factors, race was the only independent factor that affected knee laxity in both knees.

    CONCLUSIONS: Race is directly associated with knee laxity. Jordanians tend to have more laxity in knee joints compared with Malaysians. Larger multi-center and genetic studies are recommended to establish the racial differences between different ethnic groups.

    Matched MeSH terms: Range of Motion, Articular/physiology*
  3. Cheng WL, Jaafar Z
    J Sports Med Phys Fitness, 2020 Jun;60(6):895-902.
    PMID: 32487984 DOI: 10.23736/S0022-4707.20.10619-4
    BACKGROUND: Lateral ankle sprain is the most common injury in basketball, and many of these sprains resulted in residual functional deficits. This study aimed to compare ankle strength and range of motion, and postural balance between competitive basketball players with and without lateral ankle sprain.

    METHODS: This was a cross-sectional study involving 42 male competitive basketball players. Subjects were divided into the injured and uninjured groups based on self-reported questionnaires. Ankle range of motion (ROM) was measured using a goniometer, ankle isokinetic strength testing performed using Biodex System 4 PRO, and single-leg stability tests performed using Biodex Balance System SD.

    RESULTS: Between the injured and uninjured ankles, there was a decrease in plantarflexion ROM (44.89±6.85 vs. 50.75±9.31, P<0.05) and an increase in eversion ROM (14.50±5.63 vs. 11.74±4.53, P<0.05). There was a reduction in inversion and plantarflexion strength at 30°/s peak torque and 120 °/s peak torque (P<0.05). However, no significant difference observed in the postural stability indexes between the two groups.

    CONCLUSIONS: This study proves that there are residual ROM and strength deficits after an ankle sprain, however, these deficits do not affect their balance ability.

    Matched MeSH terms: Range of Motion, Articular
  4. Siong FT, Kim TW, Kim SC, Lee ES, Jaffar MSA, Lee YS
    J Arthroplasty, 2020 02;35(2):380-387.
    PMID: 31587980 DOI: 10.1016/j.arth.2019.09.005
    BACKGROUND: The aims of this study were to (1) describe our functional stepwise multiple needle puncturing (MNP) technique as the final step in medial ligament balancing during total knee arthroplasty (TKA) and (2) evaluate whether this technique can provide sufficient medial release with safety.

    METHODS: A total of 137 patients with 212 consecutive knees who underwent TKAs with or without functional stepwise MNP of superficial medial collateral ligament was recruited in this prospective cohort. Eighty-one patients with 129 knees who performed serial stress radiographs were enrolled in the final assessment. Superficial medial collateral ligament was punctured selectively (anteriorly or posteriorly or both) and sequentially depending on the site and degree of tightness. Mediolateral stability was assessed using serial stress radiographs and comparison was performed between the MNP and the non-MNP groups at postoperative 6 months and 1 year. Clinical outcomes were also evaluated between 2 groups.

    RESULTS: Fifty-five TKAs required additional stepwise MNP (anterior needling 19, posterior needling 3, both anterior and posterior needling 33). Preoperative hip-knee-ankle angle and the difference in varus-valgus stress angle showed significant difference between the MNP and the non-MNP groups, respectively (P = .009, P = .037). However, there was no significant difference when comparing the varus-valgus stress angle between the MNP and the non-MNP groups during serial assessment. Clinical outcomes including range of motion also showed no significant differences between the 2 groups.

    CONCLUSION: Functional medial ligament balancing with stepwise MNP can provide sufficient medial release with safety in TKA with varus aligned knee without clinical deterioration or complication such as instability.

    LEVEL OF EVIDENCE: Level II, Prospective cohort study.

    Matched MeSH terms: Range of Motion, Articular
  5. Ng CK, Chen JY, Yeh JZY, Ho JPY, Merican AM, Yeo SJ
    J Arthroplasty, 2018 06;33(6):1936-1944.
    PMID: 29395720 DOI: 10.1016/j.arth.2017.12.025
    BACKGROUND: We hypothesized that there is a correlation between the distal femoral rotation and proximal tibial joint line obliquity in nonarthritic knees. This has significance for kinematic knee arthroplasty, in which the target knee alignment desired approximates the knee before disease.

    METHODS: Fifty computed tomography scans of nonarthritic knees were evaluated using three-dimensional image processing software. Four distal femoral rotational axes were determined in the axial plane: the transepicondylar axis (TEA), transcondylar axis (TCA), posterior condylar axis (PCA), and a line perpendicular to Whiteside's anterior-posterior axis. Then, angles were measured relative to the TEA. Tibial joint line obliquity was measured as the angle between the proximal tibial plane and a line perpendicular to the axis of the tibia.

    RESULTS: There was a strong positive correlation between PCA-TEA and tibial joint line obliquity (r = 0.68, P < .001) as well as TCA-TEA and tibial joint line obliquity (r = 0.69, P < .001). In addition, the tibial joint line obliquity and TCA-TEA angles were similar, 3.7° ± 2.2° (mean ± standard deviation) and 3.5° ± 1.7°, respectively (mean difference, 0.2° ± 0.2°; P = .369).

    CONCLUSION: Both PCA-TEA and TCA-TEA strongly correlated with proximal tibial joint line obliquity indicating a relationship between distal femoral rotational geometry and proximal tibial inclination. These findings could imply that the native knee in flexion attempts to balance the collateral ligaments toward a rectangular flexion space. A higher tibial varus inclination is matched with a more internally rotated distal femur relative to the TEA.

    Matched MeSH terms: Range of Motion, Articular
  6. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Eur Phys J C Part Fields, 2019;79(5):444.
    PMID: 31265003 DOI: 10.1140/epjc/s10052-019-6926-x
    A search for supersymmetry is presented based on events with at least one photon, jets, and large missing transverse momentum produced in proton-proton collisions at a center-of-mass energy of 13



    Te



    . The data correspond to an integrated luminosity of 35.9



    fb

    -
    1



    and were recorded at the LHC with the CMS detector in 2016. The analysis characterizes signal-like events by categorizing the data into various signal regions based on the number of jets, the number of
    b
    -tagged jets, and the missing transverse momentum. No significant excess of events is observed with respect to the expectations from standard model processes. Limits are placed on the gluino and top squark pair production cross sections using several simplified models of supersymmetric particle production with gauge-mediated supersymmetry breaking. Depending on the model and the mass of the next-to-lightest supersymmetric particle, the production of gluinos with masses as large as 2120



    Ge



    and the production of top squarks with masses as large as 1230



    Ge



    are excluded at 95% confidence level.
    Matched MeSH terms: Motion
  7. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Eur Phys J C Part Fields, 2019;79(2):90.
    PMID: 30814908 DOI: 10.1140/epjc/s10052-019-6556-3
    A search is presented for the single production of vector-like quarks in proton-proton collisions at


    s

    =
    13

    TeV

    . The data, corresponding to an integrated luminosity of 35.9



    fb

    -
    1



    , were recorded with the CMS experiment at the LHC. The analysis focuses on the vector-like quark decay into a top quark and a
    W
    boson, with one muon or electron in the final state. The mass of the vector-like quark candidate is reconstructed from hadronic jets, the lepton, and the missing transverse momentum. Methods for the identification of
    b
    quarks and of highly Lorentz boosted hadronically decaying top quarks and
    W
    bosons are exploited in this search. No significant deviation from the standard model background expectation is observed. Exclusion limits at 95% confidence level are set on the product of the production cross section and branching fraction as a function of the vector-like quark mass, which range from 0.3 to 0.03


    pb

    for vector-like quark masses of 700 to 2000


    GeV

    . Mass exclusion limits up to 1660


    GeV

    are obtained, depending on the vector-like quark type, coupling, and decay width. These represent the most stringent exclusion limits for the single production of vector-like quarks in this channel.
    Matched MeSH terms: Motion
  8. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Eur Phys J C Part Fields, 2019;79(11):969.
    PMID: 31886778 DOI: 10.1140/epjc/s10052-019-7451-7
    Measurements are presented of the triple-differential cross section for inclusive isolated-photon+jet events in

    p
    p

    collisions at


    s

    =
    8

    TeV as a function of photon transverse momentum (

    p

    T


    γ




    ), photon pseudorapidity (

    η

    γ




    ), and jet pseudorapidity (

    η
    jet

    ). The data correspond to an integrated luminosity of

    19.7



    fb

    -
    1




    that probe a broad range of the available phase space, for


    |


    η

    γ





    |
    <
    1.44


    and


    1.57
    <
    |


    η

    γ





    |
    <
    2.50


    ,


    |


    η
    jet


    |
    <
    2.5


    ,

    40
    <

    p

    T


    γ




    <
    1000




    GeV

    , and jet transverse momentum,

    p

    T

    jet

    , > 25


    GeV

    . The measurements are compared to next-to-leading order perturbative quantum chromodynamics calculations, which reproduce the data within uncertainties.
    Matched MeSH terms: Motion
  9. Sirunyan AM, Tumasyan A, Adam W, Asilar E, Bergauer T, Brandstetter J, et al.
    Eur Phys J C Part Fields, 2017;77(12):845.
    PMID: 31985736 DOI: 10.1140/epjc/s10052-017-5317-4
    A search is presented for an excess of events with heavy-flavor quark pairs (

    t

    t
    ¯


    and

    b

    b
    ¯


    ) and a large imbalance in transverse momentum in data from proton-proton collisions at a center-of-mass energy of 13


    TeV

    . The data correspond to an integrated luminosity of 2.2



    fb

    -
    1



    collected with the CMS detector at the CERN LHC. No deviations are observed with respect to standard model predictions. The results are used in the first interpretation of dark matter production in

    t

    t
    ¯


    and

    b

    b
    ¯


    final states in a simplified model. This analysis is also the first to perform a statistical combination of searches for dark matter produced with different heavy-flavor final states. The combination provides exclusions that are stronger than those achieved with individual heavy-flavor final states.
    Matched MeSH terms: Motion
  10. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Asilar E, Bergauer T, et al.
    Eur Phys J C Part Fields, 2016;76(8):439.
    PMID: 28303081 DOI: 10.1140/epjc/s10052-016-4261-z
    A search for new physics is performed using events with two isolated same-sign leptons, two or more jets, and missing transverse momentum. The results are based on a sample of proton-proton collisions at a center-of-mass energy of 13[Formula: see text] recorded with the CMS detector at the LHC, corresponding to an integrated luminosity of 2.3 [Formula: see text]. Multiple search regions are defined by classifying events in terms of missing transverse momentum, the scalar sum of jet transverse momenta, the transverse mass associated with a [Formula: see text] boson candidate, the number of jets, the number of [Formula: see text] quark jets, and the transverse momenta of the leptons in the event. The analysis is sensitive to a wide variety of possible signals beyond the standard model. No excess above the standard model background expectation is observed. Constraints are set on various supersymmetric models, with gluinos and bottom squarks excluded for masses up to 1300 and 680[Formula: see text], respectively, at the 95 % confidence level. Upper limits on the cross sections for the production of two top quark-antiquark pairs (119[Formula: see text]) and two same-sign top quarks (1.7[Formula: see text]) are also obtained. Selection efficiencies and model independent limits are provided to allow further interpretations of the results.
    Matched MeSH terms: Motion
  11. Chan CYW, Chiu CK, Kwan MK
    Spine (Phila Pa 1976), 2016 Aug 15;41(16):E973-E980.
    PMID: 26909833 DOI: 10.1097/BRS.0000000000001516
    STUDY DESIGN: A prospective study.

    OBJECTIVE: The aim of this study was to analyze the proximal thoracic (PT) flexibility and its compensatory ability above the "potential UIV."

    SUMMARY OF BACKGROUND DATA: Shoulder and neck imbalance can be caused by overcorrection of the main thoracic (MT) curve due to inability of PT segment to compensate.

    METHODS: Cervical supine side bending (CSB) radiographs of 100 Lenke 1 and 2 patients were studied. We further stratified Lenke 1 curves into Lenke 1-ve: PT side bending (PTSB) 80.0% of cases of the PT segment were unable to compensate at T3-T6. In Lenke 1+ve curves, 78.4% were unable to compensate at T6, followed by T5 (75.7%), T4 (73.0%), T3 (59.5%), T2 (27.0%), and T1 (21.6%). In Lenke 1-ve curves, 36.4% of cases were unable to compensate at T6, followed by T5 (45.5%), T4 (45.5%), T3 (30.3%), T2 (21.2%), and T1 (15.2%). A significant difference between Lenke 1-ve and Lenke 1+ve was observed from T3 to T6. The difference between Lenke 1+ve and Lenke 2 curves was significant only at T2.

    CONCLUSION: The compensation ability and the flexibility of the PT segments of Lenke 1-ve and Lenke 1+ve curves were different. Lenke 1+ve curves demonstrated similar characteristics to Lenke 2 curves.

    LEVEL OF EVIDENCE: 3.

    Matched MeSH terms: Range of Motion, Articular/physiology*
  12. Mustaza SM, Elsayed Y, Lekakou C, Saaj C, Fras J
    Soft Robot, 2019 06;6(3):305-317.
    PMID: 30917093 DOI: 10.1089/soro.2018.0032
    Robot-assisted surgery is gaining popularity worldwide and there is increasing scientific interest to explore the potential of soft continuum robots for minimally invasive surgery. However, the remote control of soft robots is much more challenging compared with their rigid counterparts. Accurate modeling of manipulator dynamics is vital to remotely control the diverse movement configurations and is particularly important for safe interaction with the operating environment. However, current dynamic models applied to soft manipulator systems are simplistic and empirical, which restricts the full potential of the new soft robots technology. Therefore, this article provides a new insight into the development of a nonlinear dynamic model for a soft continuum manipulator based on a material model. The continuum manipulator used in this study is treated as a composite material and a modified nonlinear Kelvin-Voigt material model is utilized to embody the visco-hyperelastic dynamics of soft silicone. The Lagrangian approach is applied to derive the equation of motion of the manipulator. Simulation and experimental results prove that this material modeling approach sufficiently captures the nonlinear time- and rate-dependent behavior of a soft manipulator. Material model-based closed-loop trajectory control was implemented to further validate the feasibility of the derived model and increase the performance of the overall system.
    Matched MeSH terms: Motion
  13. Devnani AS
    Singapore Med J, 2004 Jan;45(1):14-9.
    PMID: 14976577
    To study the long term result of open reduction of longstanding dislocated elbows with regard to stability, avascular necrosis of the distal humerus and degenerative changes of the joint.
    Matched MeSH terms: Range of Motion, Articular/physiology
  14. Devnani AS
    Singapore Med J, 2000 Sep;41(9):436-40.
    PMID: 11193116
    AIM: To study the outcome of gradual reduction by skin traction of supracondylar fracture of the humerus in children with swollen elbow, who seek treatment two days or longer after the injury.
    METHOD: Fifteen children aged between 4 and 11 years (average 7 years 11 months), who had initially consulted a traditional practitioner, reported between 2 and 21 days (average 7.5) after the injury were treated by skin traction with the elbow kept straight and the forearm in position of comfort.
    RESULTS: The average duration of stay in hospital was 14 days. All fractures healed; there was no incidence of myositis ossificans or neurovascular deficit. All patients had functional range of movements at the elbow within 6 months. Five patients developed cubitus varus deformity greater than 5 degrees, they were classified as poor result. Four out of these 5 patients had sought treatment after a delay of 7 days or longer. There were 9 good (60%), 1 fair (7%) and 5 poor (33%) results.
    CONCLUSION: Gradual reduction by skin traction is safe. It is possible to achieve satisfactory reduction if the delay is up to 7 days. The results with regards to deformity and function were comparable with those obtained following open or closed Kirschner wire fixation.
    Matched MeSH terms: Range of Motion, Articular
  15. Devnani AS
    Singapore Med J, 2000 Nov;41(11):534-7.
    PMID: 11284611
    To describe an appliance used for equalisation of severe congenital lower limb length discrepancy for patients who refuse to undergo any operative correction but wish to walk and look better.
    Matched MeSH terms: Range of Motion, Articular
  16. Mat Eil Ismail MS, Sharifudin MA, Shokri AA, Ab Rahman S
    Singapore Med J, 2016 Mar;57(3):138-43.
    PMID: 26996450 DOI: 10.11622/smedj.2016055
    INTRODUCTION: Physiotherapy is an important part of rehabilitation following arthroplasty, but the impact of preoperative physiotherapy on functional outcomes is still being studied. This randomised controlled trial evaluated the effect of preoperative physiotherapy on the short-term functional outcomes of primary total knee arthroplasty (TKA).
    METHODS: 50 patients with primary knee osteoarthritis who underwent unilateral primary TKA were randomised into two groups: the physiotherapy group (n = 24), whose patients performed physical exercises for six weeks immediately prior to surgery, and the nonphysiotherapy group (n = 26). All patients went through a similar physiotherapy regime in the postoperative rehabilitation period. Functional outcome assessment using the algofunctional Knee Injury and Osteoarthritis Outcome Score (KOOS) scale and range of motion (ROM) evaluation was performed preoperatively, and postoperatively at six weeks and three months.
    RESULTS: Both groups showed a significant difference in all algofunctional KOOS subscales (p < 0.001). The mean score difference at six weeks and three months was not significant in the sports and recreational activities subscale for both groups (p > 0.05). Significant differences were observed in the time-versus-treatment analysis between groups for the symptoms (p = 0.003) and activities of daily living (p = 0.025) subscales. No significant difference in ROM was found when comparing preoperative measurements and those at three months following surgery, as well as in time-versus-treatment analysis (p = 0.928).
    CONCLUSION: Six-week preoperative physiotherapy showed no significant impact on short-term functional outcomes (KOOS subscales) and ROM of the knee following primary TKA.
    KEYWORDS: algofunctional Knee Injury and Osteoarthritis Outcome Score; functional outcome; prehabilitation; preoperative physiotherapy; total knee arthroplasty
    Matched MeSH terms: Range of Motion, Articular/physiology*
  17. Shahrulazua A, Ariff Sukimin MS, Tengku Muzaffar TM, Yusof MI
    Singapore Med J, 2010 Mar;51(3):235-41.
    PMID: 20428746
    The purpose of this study was to evaluate the early functional outcome following the use of a bioabsorbable suture anchor to simplify the repair of injured lateral ankle structures as a variation of an established technique known as the Brostrom-Gould procedure.
    Matched MeSH terms: Range of Motion, Articular
  18. Sulaiman AR, Halim AS, Azman WS, Eskandar H
    Singapore Med J, 2008 Aug;49(8):e205-7.
    PMID: 18756334
    Post-traumatic severe patella infera and intra-articular adhesion may lead to a severe knee stiffness. We report a 29-year-old man, a muslim prayer leader, who had a previous knee injury. He presented with knee movement from ten degrees to 30 degrees, patellar infera with a length of patella to length of patellar tendon ratio of 2:5, and severe knee arthrofibrosis. He underwent incision of the patella ligament and open arthrofibrosis release, leaving a tendon gap and skin defect of 5 cm. Reconstruction was successfully done using a free vascularised composite tensor fascia lata flap. He regained full range of knee motion with normal strength quadriceps mechanism at five months after surgery, and remained in full function at 18 months follow-up.
    Matched MeSH terms: Range of Motion, Articular
  19. Ravanfar SA, Razak HA, Ismail Z, Monajemi H
    Sensors (Basel), 2015;15(9):22750-75.
    PMID: 26371005 DOI: 10.3390/s150922750
    This paper reports on a two-step approach for optimally determining the location and severity of damage in beam structures under flexural vibration. The first step focuses on damage location detection. This is done by defining the damage index called relative wavelet packet entropy (RWPE). The damage severities of the model in terms of loss of stiffness are assessed in the second step using the inverse solution of equations of motion of a structural system in the wavelet domain. For this purpose, the connection coefficient of the scaling function to convert the equations of motion in the time domain into the wavelet domain is applied. Subsequently, the dominant components based on the relative energies of the wavelet packet transform (WPT) components of the acceleration responses are defined. To obtain the best estimation of the stiffness parameters of the model, the least squares error minimization is used iteratively over the dominant components. Then, the severity of the damage is evaluated by comparing the stiffness parameters of the identified model before and after the occurrence of damage. The numerical and experimental results demonstrate that the proposed method is robust and effective for the determination of damage location and accurate estimation of the loss in stiffness due to damage.
    Matched MeSH terms: Motion
  20. Mohamad N, Abdul Khanan MF, Ahmad A, Md Din AH, Shahabi H
    Sensors (Basel), 2019 Aug 31;19(17).
    PMID: 31480412 DOI: 10.3390/s19173778
    Evaluating water level changes at intertidal zones is complicated because of dynamic tidal inundation. However, water level changes during different tidal phases could be evaluated using a digital surface model (DSM) captured by unmanned aerial vehicle (UAV) with higher vertical accuracy provided by a Global Navigation Satellite System (GNSS). Image acquisition using a multirotor UAV and vertical data collection from GNSS survey were conducted at Kilim River, Langkawi Island, Kedah, Malaysia during two different tidal phases, at high and low tides. Using the Structure from Motion (SFM) algorithm, a DSM and orthomosaics were produced as the main sources of data analysis. GNSS provided horizontal and vertical geo-referencing for both the DSM and orthomosaics during post-processing after field observation at the study area. The DSM vertical accuracy against the tidal data from a tide gauge was about 12.6 cm (0.126 m) for high tide and 34.5 cm (0.345 m) for low tide. Hence, the vertical accuracy of the DSM height is still within a tolerance of ±0.5 m (with GNSS positioning data). These results open new opportunities to explore more validation methods for water level changes using various aerial platforms besides Light Detection and Ranging (LiDAR) and tidal data in the future.
    Matched MeSH terms: Motion
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links