Displaying publications 401 - 420 of 1919 in total

Abstract:
Sort:
  1. Ismail Lias, Muhammad Hussain Ismail, Iskandar Dzulkernain Md Raffee, Mohd Aman Ihsan Mamat
    MyJurnal
    Aluminium foam tube is a metal that consists of porous medium with special characteristics such as good energy absorption, good heat transfer and high thermal conductivity. These make it suitable to be used in a wide range of applications such as in heat exchangers. The aim of this project is to identify and analyse mechanical behaviour and microstructure aluminium foam tube produced and fabricated with infiltration method with vacuum-gas. The density of aluminium foam tube was also determined and an average aluminium foam tube with porosity 50% - 80% with the average NaCl particle size 2mm, 3mm and 4mm was produced. Foams with porosity 60%-75% NaCl has higher energy absorption. These was based on foam structure, density and maximum compressive load test result.
    Matched MeSH terms: Pressure
  2. Abrahim NN, Abdul-Rahman PS, Aminudin N
    PeerJ, 2018;6:e5694.
    PMID: 30324012 DOI: 10.7717/peerj.5694
    Leaves from three varieties of Ficus deltoidea, colloquially termed small- (FDS), medium- (FDM), and big-type leaf (FDB), were subjected to water extraction. The crude extracts were fractionated using water (WF) and ethyl acetate (EAF). The phenolic and flavonoid content, antioxidant activity, and cytotoxicity of the fractions were investigated. The EAF had the highest phenolic and flavonoid content compared to the other FDS fractions. Conversely, the FDM crude extract had the highest phenolic and flavonoid content compared to the other FDM samples. Antioxidant activity was highest in the FDB crude extract. Ultra-high-performance liquid chromatography showed that two compounds, vitexin and coumaric acid, were present in the FDB crude extract. Additionally, the F. deltoidea leaves caused no signs of toxicity in a normal liver cell line. Our findings show that F. deltoidea varieties have excellent antioxidant activity with no cytotoxic effects on normal liver cells.
    Matched MeSH terms: Chromatography, High Pressure Liquid
  3. Mugilan Muralitharan, Syed Ahmad Helmi, Kamarulafizam Ismail, Azanizawati Ma'aram
    MyJurnal
    Aesthetic value of the automotive car seat has been one of the selling points of each car besides
    providing functions such as being safe, supportive as well provides comfort to the occupants. Other
    criteria considered besides the aesthetic element are cushion foam and self-adjustment factor.
    Ergonomics is not a new issue because most of the existing seat design today have already practiced it.
    Existing car seat manufacturers have considered anthropometry data. The average upon 95th percentile of
    human measurement had been deliberated. However, issues such as time spent driving and seat design
    issue have arisen upon the search of comfort and rising of musculoskeletal disease such as back pain. As a
    solution, this study would propose an automotive car seat design of ergonomic evolution, which would
    create comfort by manipulating the seat cushion foams. The proposed seat cushion foam would be use to
    replace the existing polymers with beanbag foam. This is inspire by the nature of beanbag, fitting up and
    providing comfort to the occupants of various body sizes and shapes. Malaysian anthropometry
    measurements are required for design of car seat, which later compared with the existing seats of
    commercial vehicle. The literature review showed the pressure mapping technique of respondent seating
    on the existing car seat. The most sensitive compartments where discomfort are experienced studied and
    placed with sachets filed with beanbag beads. This experiment conducted many times over a few
    respondents by using the pressure mat to find out, if there are any changes in terms of comfort. This
    design of new car seat with a manipulation cushion foam replaced with beanbag foam could be a niche to
    eliminate discomfort to all range body sizes and shapes.
    Matched MeSH terms: Pressure
  4. Sharuddin Mohd Dahuri, Nor Hakimah Ahmad Subri, Norashady Mohd Noor
    MyJurnal
    his paper presents the structure and static model of engine camshaft analysis. For the purposes of this analysis, the finite element method is used. Camshaft is one of the critical components for effective and precise work of internal combustion engines. This camshaft rotates at high speed causing pressure and vibration in the system. Camshafts are also subject to varying fatigue burden due to cam plunger contact. These precise values are required to be determined to prevent failure in the camshaft. The objective of the project is to model and to perform pressure analysis on the camshaft machine. In this project the standard engine cam shafts are modeled and analyzed using the CATIA V5R21 software respectively. This model is created by the basic requirements of the engine. It is done with an existing background, such as the power of acting on cam by means of a valve while running at maxi mum speed. Here the approach becomes fully CAE based. CAE - based approaches enrich Research and limit the time span. A study was conducted to predict the behavior of the different camshafts structure of the material using the finite three - dimensional pressure of the element. Four types of materials such as Steel, Titanium, Aluminum and Magnesium are taken into account. FEA Stress and maximum displacement decisions are calculated and compared to all of the above materials. The conclusion is to focus on the material suitable for the camshaft to reduce the maximum displacement and weight. Titanium materials become the best material for camshaft manufacturing based on analysis.
    Matched MeSH terms: Pressure
  5. Hazrina HZ, Noorashikin MS, Beh SY, Loh SH, Zain NNM
    R Soc Open Sci, 2018 Jul;5(7):180070.
    PMID: 30109066 DOI: 10.1098/rsos.180070
    Cloud point extraction (CPE) is a separation and preconcentration of non-ionic surfactant from one liquid phase to another. In this study, Sylgard 309 and three different types of additives for CPE, namely CPE-Sylgard, CPE-Sylgard-BMIMBr and CPE-Sylgard-GLDA, are investigated to extract methylphenol from water samples. The methylphenols are well separated by reversed-phase high-performance liquid chromatography (HPLC) with isocratic elution of acetonitrile : water; 60 : 40 (v/v) and detection at 260 nm. The optimized parameters for the effect of salt, surfactant, temperature, time of extraction, pH, interference study and the performance of different additives on methylphenol extraction are investigated. CPE-Sylgard-GLDA is chosen because it gives us a high peak and good peak area compared with CPE-Sylgard and CPE-Sylgard-BMIMBr. The recovery extractions of CPE-Sylgard-GLDA are obtained in the range of 80-99% as the percentage of relative standard deviation (RSD) is less than 10. The LOD and LOQ are 0.05 ppm and 0.18 ppm, respectively. The method developed for CPE-Sylgard-GLDA coupled with HPLC is feasible for the determination of methylphenol because it is simple, effective, cheap, and produces a high percentage of recovery.
    Matched MeSH terms: Chromatography, High Pressure Liquid
  6. Mazlinda, M., Ayu Sulaini, J., Suriawati, G., Mardiana, M., Zahri, M.K.
    MyJurnal
    A pressure ulcer is a common health problem, particularly among the physically limited or bedridden individuals. The most vulnerable group to suffer this condition is the elderly. The prevalence of Geriatric inpatient with pressure ulcer stage I, II, III or even IV for a month was 35.5% of the total admission. The understanding of recovery process, prevention remains the best management strategy as it improves their quality of life. This study aims to compare PU development outcomes in geriatric patients nursed on either using the Durable barrier cream (Cavillon cream) or non-pharmacological intervention alone. Using the Quasi experimental study-design, the selected participants were subjected to Cavaillon cream as well as the intervention. The assessment used were the outcome of the pressure ulcer was assessed using the measured size of the redness area. There was the statistically significant reduction in pressure ulcer size on day three compared to the size on day one among the intervention group, z value was -5.028, p
    Matched MeSH terms: Pressure Ulcer
  7. Aeinehvand MM, Weber L, Jiménez M, Palermo A, Bauer M, Loeffler FF, et al.
    Lab Chip, 2019 Feb 20.
    PMID: 30785443 DOI: 10.1039/c8lc00849c
    Reversible valves on centrifugal microfluidic platforms facilitate the automation of bioanalytical assays, especially of those requiring a series of steps (such as incubation) in a single reaction chamber. In this study, we present fixed elastic reversible (FER) valves and tunable elastic reversible (TER) valves that are easy to fabricate, implement and control. In the FER valve the compression of an elastic barrier/patch against a microchamber's outlet prevents the release of liquid. The valve sealing pressure was determined by adjusting the engraving depth of the valve-seat at which the elastic patch was located, this allows to set the sealing pressure during disc fabrication. In the TER valve, the patch compression value and sealing pressure is controlled by the penetration depth of a plastic screw into the valve-seat. The ER valves prevent liquid flow until the centrifugal force overcomes their sealing pressure. Moreover, at a constant spin speed, turning the screw of a TER valve reduces its sealing pressure and opens the valve. Therefore, the TER valve allows for controlling of the liquid transfer volume at various spin speeds. The FER and TER valves' behavior is mathematically described and equations for the prediction of their operation under centrifugal forces are provided. As a point-of-care (POC) application of ER valves, we have developed a microfluidic disc with a series of TER valves and peptide microarrays for automated multiplexed detection of five different proteins from a single serum sample.
    Matched MeSH terms: Pressure
  8. Major VJ, Chiew YS, Shaw GM, Chase JG
    Biomed Eng Online, 2018 Nov 12;17(1):169.
    PMID: 30419903 DOI: 10.1186/s12938-018-0599-9
    BACKGROUND: Mechanical ventilation is an essential therapy to support critically ill respiratory failure patients. Current standards of care consist of generalised approaches, such as the use of positive end expiratory pressure to inspired oxygen fraction (PEEP-FiO2) tables, which fail to account for the inter- and intra-patient variability between and within patients. The benefits of higher or lower tidal volume, PEEP, and other settings are highly debated and no consensus has been reached. Moreover, clinicians implicitly account for patient-specific factors such as disease condition and progression as they manually titrate ventilator settings. Hence, care is highly variable and potentially often non-optimal. These conditions create a situation that could benefit greatly from an engineered approach. The overall goal is a review of ventilation that is accessible to both clinicians and engineers, to bridge the divide between the two fields and enable collaboration to improve patient care and outcomes. This review does not take the form of a typical systematic review. Instead, it defines the standard terminology and introduces key clinical and biomedical measurements before introducing the key clinical studies and their influence in clinical practice which in turn flows into the needs and requirements around how biomedical engineering research can play a role in improving care. Given the significant clinical research to date and its impact on this complex area of care, this review thus provides a tutorial introduction around the review of the state of the art relevant to a biomedical engineering perspective.

    DISCUSSION: This review presents the significant clinical aspects and variables of ventilation management, the potential risks associated with suboptimal ventilation management, and a review of the major recent attempts to improve ventilation in the context of these variables. The unique aspect of this review is a focus on these key elements relevant to engineering new approaches. In particular, the need for ventilation strategies which consider, and directly account for, the significant differences in patient condition, disease etiology, and progression within patients is demonstrated with the subsequent requirement for optimal ventilation strategies to titrate for patient- and time-specific conditions.

    CONCLUSION: Engineered, protective lung strategies that can directly account for and manage inter- and intra-patient variability thus offer great potential to improve both individual care, as well as cohort clinical outcomes.

    Matched MeSH terms: Positive-Pressure Respiration/instrumentation*; Positive-Pressure Respiration/methods; Pressure
  9. Saleem H, Ahmad I, Zengin G, Mahomoodally FM, Rehman Khan KU, Ahsan HM, et al.
    Nat Prod Res, 2020 Dec;34(23):3373-3377.
    PMID: 30678488 DOI: 10.1080/14786419.2018.1564299
    In this study, different parts (aerial, stem and root) of Salvadora oleoides Decne were investigated in order to explore their phytochemical composition and biological potential. The bioactive contents were evaluated by conventional spectrophotometric methods. Additionally, the secondary metabolite compounds were identified by UHPLC-MS analysis. Biological potential was evaluated by determining antioxidant (DPPH, FRAP, and Phosphomolybdenum) and enzyme inhibitory (butrylcholinesterase and lipoxygenase) effects. Higher total bioactive contents were found in methanolic extracts which tend to correlate with higher radical scavenging and reducing potential of these extracts. LC/MS spectrum revealed the presence of 16 different secondary metabolites belonging to terpene, glucoside and sesquiterpenoid dervivatives. Glucocleomin and emotin A were the main compounds present in all three parts. The strongest butrylcholinesterase and lipoxygenase inhibitory activity was observed for root and stem DCM extracts. Demonstrated biological potential of S. oleoides plant can trace a new road map for developing newly designed bioactive pharmaceuticals.
    Matched MeSH terms: Chromatography, High Pressure Liquid
  10. MUHAMMAD ILMAN HAKIMI CHUA, ABU BAKAR SULONG, MOHD FAZURI ABDULLAH, NORHAMIDI MUHAMAD
    Sains Malaysiana, 2013;42:1743-1750.
    In this study, injection molding parameters, including green strength, surface quality and green part density, were optimized using the L18 Taguchi orthogonal array. The L25 Taguchi method was used to optimize the green density of solvent debinding parameters. The feedstock consisted of stainless steel powder (SS316L), with powder loading fractions of 63, 63.5 and 64 v/o. The binder compositions used in the study were polyethelene glycol (PEG-73 wt. %), polymethyl methacrilate (PMMA-25 wt. %) and stearic acid (2 wt. %). The Taguchi method was used to optimize the injection parameters. The obtained optimum parameters were as follows: mold temperature of 65oC, injection temperature of 145oC, injection pressure of 650 bar, injection flow rate of 20 m3/s, holding time of 5 s and powder loading of 64% v/o. Analysis of variance results showed that mold temperature has the greatest influence in the production of good green part surface quality and that powder loading gave the best green part strength. Immersion time and temperature were used to optimize for solvent debinding parameters. By optimizing the solvent debinding parameters, an immersion temperature of 61oC and immersion time of 5 h produced the highest density which is the optimum value gain in this study.
    Matched MeSH terms: Pressure
  11. Peter A.G. Cormack, Faizatul Shimal Mehamod
    Sains Malaysiana, 2013;42:529-535.
    In this paper, the synthesis and characterisation of caffeine-imprinted polymers are described. The polymers were prepared in monolithic form via both reversible addition-fragmentation chain-transfer (RAFT) polymerisation and conventional free radical polymerisation, using methacrylic acid and ethylene glycol dimethacrylate as the functional monomer and crosslinking agent, respectively. The potential benefits in applying RAFT polymerisation techniques towards the synthesis of molecularly imprinted polymers (MIPs) are explored and elucidated. The pore structures of the polymers produced were characterised by nitrogen sorption porosimetry and the molecular recognition properties of representative products were evaluated in high-performance liquid chromatography (HPLC) mode. Molecular imprinting effects were confirmed by analysing the relative retentions of analytes on imprinted and non-imprinted HPLC
    stationary phases. It was found that a caffeine-imprinted polymer synthesised by RAFT polymerisation was superior to a polymer prepared using a conventional synthetic approach; the imprinting factor and column efficiency were found to be higher for the former material.
    Matched MeSH terms: Chromatography, High Pressure Liquid
  12. Hayat T, Abbasi F, Ahmad B, Alsaedi A
    Sains Malaysiana, 2014;43:1583-1590.
    This article concerns with a mixed convection peristaltic flow of an electrically conducting fluid in an inclined asymmetric channel. Analysis has been carried out in the presence of Joule heating. The fluid viscosity and thermal conductivity are assumed to vary as a linear function of temperature. A nonlinear coupled governing system is computed. Numerical results were presented for the velocity, pressure gradient, temperature and streamlines. Heat transfer rate at the wall is computed and analyzed. Graphs reflecting the contributions of embedded parameters were discussed.
    Matched MeSH terms: Pressure
  13. Mutafi A, Yidris N, Ishak MR, Zahari R
    Heliyon, 2018 Nov;4(11):e00937.
    PMID: 30839801 DOI: 10.1016/j.heliyon.2018.e00937
    Steel sections are normally shaped via cold work manufacturing processes. The extent of cold work to shape the steel sections might induce residual stresses in the region of bending. Previously, researchers had performed studies on the influences of local buckling on the failure behavior of steel compression members which shown that failure will happen when most of the yielding has extended to the middle surface in the bend region of the sections. Therefore, these cold work methods may have major effect on the behavior of the steel section and also its load-bearing capability. In addition, another factor may play significant role in formed section's load-bearing capacity which is the longitudinal residual strain. The longitudinal residual strain raised during forming procedure can be used to define the section imperfection of the formed section and its relation to the existence of defects. Therefore, the main motivation of this research paper is to perform three-dimensional finite element (3D-FE) to investigate peak longitudinal residual strains of a thin-walled steel plate with large bending angle along member length. A 3D finite element simulation in ABAQUS has been employed to simulate this forming process. The study concluded that the longitudinal residual strain at the section corner edge was higher than those at the rest of the corner region. These strains at the edge were higher than the yield strain


    (



    ε


    y



    )


    of the formed section which occurred due to the lack of transverse restraint. This made the plate edge tended to bend toward the normal direction when it was under a high transverse bending. This causes a significant difference in longitudinal strain at the plate edge.
    Matched MeSH terms: Pressure
  14. Ruzita AT, Osman A, Khalid AK
    Family Physician, 1994;6:12-14.
    The aim of the study was to determine the factors associated with diabetic control among Non Insulin Dependent Diabetes Mellitus (NIDDM) in a Felda settlement area. METHODS: We analyzed the anthropometric and metabolic data of sixty three NIDDM patients in Felda Sg Koyan, Raub, Pahang. Diabetic control, was measured by glycated hemoglobin (HbA1) and fructosamine; it showed a strong correlation (r=12.8 and p-0.001). With the use of a multivariate regression model, which was adjusted for sex, age, dhration of diabetes, body mass index (BMI) and systolic blood pressure, we found that the occurrence of higher fructosamine was associated with significantly higher HbA1 (F =7.8, p=0.01). RESULTS: Obesity was present in 72% of diabetic patients with BMI>25 and had a mean duration of diabetes of 6+4 years. Mean HbAl among males (6.8 + 1.6%) were significantly different (p 0.05) to diabetic control. CONCLUSIONS: The study showed that males have a better diabetic control than females. Poor control was observed among diabetics who had diabetes for more than five years.
    Matched MeSH terms: Blood Pressure
  15. Manju K
    Family Physician, 1994;6:6-8.
    Hypertensive disorders of pregnancy is a major cause of fetal and maternal morbidity. Epidemiologic observations have shown an inverse association between calcium intake and incidence of eclampsia. Calcium supplementation has been reported to decrease blood pressure in pregnant women, although this remains controversial. The mechanism responsible for the effect of calcium on hypertinsion in pregnant women is unknown. This paper is a review of some of the recent calcium supplementation trials that have been carried out and their effectiveness in reducing systolic and diastolic blood pressure and decreasing the incidence of hypertensive disorders of pregnancy.
    Matched MeSH terms: Blood Pressure
  16. Noor Zuhartini Md Muslim, Musa Ahmad, Lee YH, Bahruddin Saad
    Sains Malaysiana, 2018;47:707-713.
    An optical fiber chemical sensor for the determination of free glutamate in food samples was fabricated based on the
    immobilization of 0.1 M copper(II) nitrate trihydrate onto sol-gel glass powder which was then mixed with methyl cellulose
    to form a pellet. A distinctive colour change from light blue to dark blue was observed in the presence of glutamate in
    less than 1 min. The colour change was measured by reflectance spectrophotometer at 691 nm. A linear relationship
    between the reflectance intensity and glutamate concentration was observed in the range of 12.5 to 500 mM with a limit
    of detection of 10.6 mM. This method is also reproducible with a relative standard deviation of less than 5%, no effect on
    pH of the glutamate solution and a good recovery of above 80%. The sensor was used for the determination of glutamate
    in common food items such as soups and flavor enhancers. The results obtained from the fabricated sensor were found
    to be comparable with HPLC method.
    Matched MeSH terms: Chromatography, High Pressure Liquid
  17. Ghani Z, Anuar A, Majid Z, Yoneda M
    Sains Malaysiana, 2017;46:2383-2392.
    This study describes the development of a multimedia environmental fate and transport model of dichlorodiphenyltrichloroethane (DDT) at Sungai Sayong watershed. Based on the latest estimated DDT emission, the DDT concentrations in air, soil, water and sediment as well as the transfer processes were simulated under the equilibrium and steady-state assumption. Model predictions suggested that soil and sediment was the dominant sink of DDT. The results showed that the model predicted was generally good agreement with field data. Compared with degradation reaction, advection outflow was more important processes occurred in the model. Sensitivities of the model estimates to input parameters were tested. The result showed that vapour pressure (Ps) and organic carbon water partition coefficient (KOC) were the most influential parameters for the model output. The model output-concentrations of DDT in multimedia environment is very important as it can be used in future for human exposure and risk assessment of organochlorine pesticides (OCPs) at Sungai Sayong Basin.
    Matched MeSH terms: Vapor Pressure
  18. Tayeb MA, Ismail BS, Khairiatul Mardiana J, Goh CT
    Sains Malaysiana, 2016;45:237-245.
    Glufosinate ammonium or ammonium salt (ammonium-(2RS)-2-amino-4- (methylphosphinato) butyric acid; C5H15N2O4P) is a commonly used polar herbicide in Malaysia and present in a variety of environmental waters at the sub-ppb level. Thus, glufosinate ammonium is analyzed in soil and water using high-performance liquid chromatography (HPLC), which is a complex yet the most powerful analysis tool. HPLC is tremendously sensitive and highly automated and HPLC instrumentation and machinery have improved over the years. However, typical problems are still encountered. HPLC users and advanced learners require help in identifying, separating and correcting typical problems. All HPLC systems consist of similar basic components. Although it is a modular system, trouble can occur in each component and change the overall performance. Resolving these problems may be expensive. This review describes the different aspects of HPLC, particularly troubleshooting, common problems and easy guidelines for maintenance.
    Matched MeSH terms: Chromatography, High Pressure Liquid
  19. Ragunathan T, Xu X, Shuhili JA, Wood CD
    ACS Omega, 2019 Oct 01;4(14):15789-15797.
    PMID: 31592451 DOI: 10.1021/acsomega.9b01232
    Hydrate formation is a common challenge in the oil and gas industry when natural gas is transported under cold conditions in the presence of water. Coatings are one of the solutions that have shown to be a promising approach to address this challenge. However, this strategy suffers from the intrinsic existence of a solid-liquid interface causing a high rate of hydrate nucleation and high hydrate adhesion strength. This proof-of-concept study highlights the performance of a magnetic slippery surface to prevent hydrate adhesion at atmospheric pressure using tetrahydrofuran hydrates. The coating consisted of a hydrocarbon-based magnetic fluid, which was applied to a metal surface to create an interface that lowered the hydrate adhesion strength on the surface. The performance of these new surfaces under static and dynamic (under fluid flow) conditions shows that the magnetic coating gel can be a potential inhibitor for hydrate adhesion as it reduced the torque value after the formation of hydrates.
    Matched MeSH terms: Atmospheric Pressure
  20. Bayat M, Alarifi IM, Khalili AA, El-Bagory TMAA, Nguyen HM, Asadi A
    Sci Rep, 2019 Oct 25;9(1):15317.
    PMID: 31653877 DOI: 10.1038/s41598-019-51450-z
    A thermo-elastic contact problem of functionally graded materials (FGMs) rotating brake disk with different pure brake pad areas under temperature dependent material properties is solved by Finite Element Method (FEM). The properties of brake disk change gradually from metal to ceramic by power-law distribution along the radial direction from the inner to the outer surface. Areas of the pure pad are changing while the vertical force is constant. The ratio of brake pad thickness to FGMs brake disk thickness is assumed 0.66. Two sources of thermal loads are considered: (1) Heat generation between the pad and brake disk due to contact friction, and (2) External thermal load due to a constant temperature at inner and outer surfaces. Mechanical responses of FGMs disk are compared with several pad contact areas. The results for temperature-dependent and temperature-independent material properties are investigated and presented. The results show that the absolute value of the shear stress in temperature-dependent material can be greater than that for temperature-independent material. The radial stress for some specific grading index (n = 1.5) is compressive near the inner surface for double contact while it is tensile for a single contact. It is concluded that the radial strain for some specific value of grading index (n = 1) is lower than other FGMs and pure double side contact brake disks.
    Matched MeSH terms: Pressure
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links