Displaying publications 4181 - 4200 of 7301 in total

Abstract:
Sort:
  1. Rafiq MT, Hamid MSA, Hafiz E, Rashid K, Chaudhary FA
    Curr Rheumatol Rev, 2021;17(4):397-403.
    PMID: 34825640 DOI: 10.2174/1573397117666210719101551
    INTRODUCTION: Knee osteoarthritis (OA) is a weight-bearing joint disease and is more common in overweight and obese persons. The objective of this study was to determine the role of rehabilitation exercises (REs) of lower limbs on weight, functional strength, and exercise adherence in overweight and obese knee OA patients.

    MATERIALS AND METHODS: The patients were recruited from the urban community of Lahore, Pakistan. The patients were divided into the rehabilitation group (RG) and control group (CG). The patients in the RG performed the REs of lower limbs and followed the instructions of daily care (IDC), while the patients in the CG only followed the IDC for a 12 weeks period. Outcome measures were assessed at pre-test before grouping and post-test after 12-weeks of interventions. The measures included: weight, functional strength, and exercise adherence. The Paired Samples t-test (for normally distributed data) and the Wilcoxon Signed Ranked Test (for data that was not normally distributed) were used to analyze the differences within groups from pre to post-test measurements. The variance 2 × 2 factors and the Mann Whitney U-test were used to analyze the difference in weight and functional strength between the groups.

    RESULTS: The patients in the RG reported a statistically significant weight reduction (p < 0.001) and improvement in the functional strength (p < 0.001) within a group. Similarly, the patients in the CG also reported a significant improvement in the scores of functional strength (p = 0.004) within a group. The improvement in the scores of functional strength was higher in the patients of RG than the CG (p < 0.001). Similarly, the patients in the RG reported a statistically significant reduction in weight than the CG (p < 0.001).

    CONCLUSION: The REs could improve weight, functional strength and exercise adherence.

  2. Chow TC, Zailani S, Rahman MK, Qiannan Z, Bhuiyan MA, Patwary AK
    PLoS One, 2021;16(11):e0259819.
    PMID: 34818357 DOI: 10.1371/journal.pone.0259819
    This study has aimed to investigate the impact of sustainable project management on sustainable project planning and success in manufacturing firms. Data was collected from project management professionals in a manufacturing firm in Malaysia. A total of 231 responses were analyzed using the partial least square (PLS) method. The findings revealed that sustainable project management has a significant impact on sustainable project success and sustainable project planning. Sustainable project planning is positively correlated with sustainable project success. The results also indicated that sustainable project planning mediates the effect of sustainable project management on sustainable project success. The findings have significant insight into the body of knowledge of the project life cycle and indicated that sustainable project planning is a crucial tool attributed to project management towards the project success of the manufacturing firm. The results can be used as a guideline for organizations, providing direction in project management to achieve sustainable development for business.
  3. Ahmad MI, Ab Rahim MH, Nordin R, Mohamed F, Abu-Samah A, Abdullah NF
    Sensors (Basel), 2021 Nov 17;21(22).
    PMID: 34833705 DOI: 10.3390/s21227629
    As nuclear technology evolves, and continues to be used in various fields since its discovery less than a century ago, radiation safety has become a major concern to humans and the environment. Radiation monitoring plays a significant role in preventive radiological nuclear detection in nuclear facilities, hospitals, or in any activities associated with radioactive materials by acting as a tool to measure the risk of being exposed to radiation while reaping its benefit. Apart from in occupational settings, radiation monitoring is required in emergency responses to radiation incidents as well as outdoor radiation zones. Several radiation sensors have been developed, ranging from as simple as a Geiger-Muller counter to bulkier radiation systems such as the High Purity Germanium detector, with different functionality for use in different settings, but the inability to provide real-time data makes radiation monitoring activities less effective. The deployment of manned vehicles equipped with these radiation sensors reduces the scope of radiation monitoring operations significantly, but the safety of radiation monitoring operators is still compromised. Recently, the Internet of Things (IoT) technology has been introduced to the world and offered solutions to these limitations. This review elucidates a systematic understanding of the fundamental usage of the Internet of Drones for radiation monitoring purposes. The extension of essential functional blocks in IoT can be expanded across radiation monitoring industries, presenting several emerging research opportunities and challenges. This article offers a comprehensive review of the evolutionary application of IoT technology in nuclear and radiation monitoring. Finally, the security of the nuclear industry is discussed.
  4. Low VL, Tan TK, Tohiran KA, Lim YAL, AbuBakar S, Nasir DM
    Vet Microbiol, 2022 Jan;264:109284.
    PMID: 34826649 DOI: 10.1016/j.vetmic.2021.109284
    Bartonelloses are emerging infectious diseases that are common in humans and animals worldwide. Several Bartonella species associated with companion animals such as Bartonella henselae and Bartonella rochalimae are species with zoonotic implications and have become a global concern. Other Bartonella species associated with wild animals, however, remain underappreciated particularly in the developing regions of the world. To explore further on this neglected bacterial agent, Leptocyclopodia ferrari (Nycteribiidae) bat flies collected from Cynopterus brachyotis (Pteropodidae), an endemic fruit bat species in Southeast Asia, were molecularly examined for the presence of Bartonella. Both 16 S-23 S ribosomal RNA intergenic spacer region and citrate synthase gene sequences exhibited less than 95 % similarity to all previously reported Bartonella spp. Further phylogenetic analysis revealed a novel clade of this Bartonella sp. with high bootstrap support. The vectorial capacity of bat flies in transmitting this novel pathogen merits further investigation.
  5. Quddus A, Yimer N, Jesse FFA, Basit MA, Amir M, Islam MS
    Saudi J Biol Sci, 2021 Dec;28(12):7068-7076.
    PMID: 34867008 DOI: 10.1016/j.sjbs.2021.08.012
    Cadmium (Cd) is often associated with reproductive disorders of mammals. Edible bird's nest (EBN) is a natural food product made of swiftlet's salivary secretion used to make their nests and it has been consumed as a tonic food for decades. This research aimed to study the protective effects of EBN against Cd-induced uterine toxicity in Sprague Dawley rats. Thirty (30) female Sprague Dawley rats were assigned into five groups as follows: group 1- negative control (NC) received distilled water; group 2 - positive control (PC) administered with CdCl2, 5 mg/kg BW; while groups EBN-1, EBN-2, and EBN-3 received CdCl2 (5 mg/kg BW) plus graded concentrations of 60, 90 and 120 mg/kg BW of EBN, respectively. After four weeks of daily oral treatment, rats were euthanized to collect the uterus for evluations of histopathological changes, Cd concentrations and Metallothionein (MT) expressions using H&E stain, inductive coupled plasma mass spectrometry (ICP-MS) and immunohistochemistry, respectively. Blood samples were collected for superoxide dismutase (SOD) analysis using SOD assay kit. Results revealed that the CdCl2 without EBN supplement (PC) group had elevated levels of Cd in the uterus along with increased MT expressions and decreased SOD enzyme activity as compared to the NC group. Moreover, uterine histopathological changes, including glandular cysts and loss of normal structure of luminal epithelium (LE) and glandular epithelium (GE) were found in the PC group. Interestingly, groups treated with CdCl2 along with EBN (EBN1, EBN2, EBN3) showed lower levels of uterine tissue Cd deposition and MT expression, lower degenerative changes with normal histomorphology of glands, and increased SOD activity as compared to the PC group. Overall, the findings revealed that oral exposure to Cd at a dose of 5 mg/kg BW resulted in significant alterations in the rat's uterus. However, the toxicity effect was averted by EBN treatment in a dose dependant manner; highest protection achieved with EBN 120 mg/kg BW, through a possible detoxification mechanism and prevention of Cd deposition.
  6. Safian MT, Sekeri SH, Yaqoob AA, Serrà A, Jamudin MD, Mohamad Ibrahim MN
    Talanta, 2022 Mar 01;239:123109.
    PMID: 34864531 DOI: 10.1016/j.talanta.2021.123109
    With each passing year, the agriculture and wood processing industries generate increasingly high tonnages of biomass waste, which instead of being burned or left to accumulate should be utilized more sustainably. In parallel, advances in green technology have encouraged large companies and nations to begin using eco-friendly materials, including eco-friendly emulsifiers, which are used in various industries and in bio-based materials. The emulsion-conducive properties of lignocellulosic materials such as cellulose, hemicellulose, and lignin, the building blocks of plant and wood structures, have demonstrated a particular ability to alter the landscape of emulsion technology. Beyond that, the further modification of their structure may improve emulsion stability, which often determines the performance of emulsions. Considering those trends, this review examines the performance of lignocellulosic materials after modification according to their stability, droplet size, and distribution by size, all of which suggest their outstanding potential as materials for emulsifying agents.
  7. Hanif MA, Ibrahim N, Dahalan FA, Md Ali UF, Hasan M, Jalil AA
    Sci Total Environ, 2022 Mar 01;810:152115.
    PMID: 34896138 DOI: 10.1016/j.scitotenv.2021.152115
    The presence of microplastics (MP) and nanoplastics (NP) in the environment poses significant hazards towards microorganisms, humans, animals and plants. This paper is focused on recent literature studies and patents discussing the removal process of these plastic pollutants. Microplastics and nanoplastics can be quantified by counting, weighing, absorbance and turbidity and can be further analyzed using scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, surface-enhanced Raman spectroscopy and Raman tweezers. Mitigation methods reported are categorized depending on the removal characteristics: (i) Filtration and separation method: Filtration and separation, electrospun nanofiber membrane, constructed wetlands; (ii) Capture and surface attachment method: coagulation, flocculation and sedimentation (CFS), electrocoagulation, adsorption, magnetization, micromachines, superhydrophobic materials and microorganism aggregation; and (iii) Degradation method: photocatalytic degradation, microorganism degradation and thermal degradation; where removal efficiency between 58 and 100% were reported. As these methods are significantly distinctive, the parameters which affect the MP/NP removal performance e.g., pH, type of plastics, presence of interfering chemicals or ions, surface charges etc. are also discussed. 42 granted international patents related to microplastics and nanoplastics removal are also reviewed where the majority of these patents are focused on separation or filtration devices. These devices are efficient for microplastics up to 20 μm but may be ineffective for nanoplastics or fibrous plastics. Several patents were found to focus on methods similar to literature studies e.g., magnetization, CFS, biofilm and microorganism aggregation; with the addition of another method: thermal degradation.
  8. Wong TL, Husain S, Ismail A, Zahedi FD, Aljunid SM, Nur AM
    Medicine (Baltimore), 2021 Nov 05;100(44):e27675.
    PMID: 34871247 DOI: 10.1097/MD.0000000000027675
    ABSTRACT: The study aims to evaluate previous management of CRSwNP patients in Universiti Kebangsaan Malaysia Medical Center (UKMMC) against a developed CP.Chronic rhinosinusitis with nasal polyposis (CRSwNP) has high economic burden and impacts patient's quality of life. Implementation of clinical pathway (CP) can standardize care while optimizing resources.Analytical cross-sectionalThis study utilized medical records of 103 CRSwNP patients at UKMMC otorhinolaryngology clinic from 2010 to 2015. Patients were divided into groups who underwent or did not undergo surgery. Information was obtained regarding sociodemographic, follow-ups, pharmaceutical regimes, and treatment cost. Cost analysis was done using top-down analysis and activity-based costing and CP was formulated. Cost was calculated using year 2020 rates to adjust for inflation. (United States Dollars [USD]1 = Ringgit Malaysia [RM] 4.2015)Study showed non-CP patients were undertreated compared to CP. This affects clinical outcomes as optimal treatment demanded by CP was not achieved. Total cost for non-CP, non-surgery patients were lower (USD660) compared to CP (USD780) due to under treatment and shorter follow-ups. Meanwhile, total cost for non-CP surgery patients were higher (USD3600) compared to CP (USD2706) due to longer visit durations and hospital stays. Non-CP surgery group underwent lengthy follow-up duration (20.7 months) prior to operation compared to 12 months expected in CP.Study showed non-CP patients were undertreated compared to CP. We identified aspects which resulted in resource wastage and unnecessary burden to our healthcare system. This study enables development of a written CP by fine-tuning various aspects of CP which could be applied to our future practice.
  9. Uddin S, Islam MR, Chowdhury MR, Wakabayashi R, Kamiya N, Moniruzzaman M, et al.
    ACS Appl Bio Mater, 2021 08 16;4(8):6256-6267.
    PMID: 35006923 DOI: 10.1021/acsabm.1c00563
    Lipid-based biocompatible ionic liquids (LBILs) have attracted attention as carriers in transdermal drug delivery systems (TDDSs) because of their lipophilic character. In this study, we report the formulation of a peptide-LBIL complex microencapsulated in an oil phase as a potential carrier for the transdermal delivery of leuprolide acetate as a model hydrophilic peptide. The peptide-LBIL complexes were prepared via a water-in-oil emulsion composed of 1,2-dimyristoyl-sn-glycerol-3-ethyl-phosphatidylcholine (EDMPC), a fatty acid (stearic, oleic, and linoleic acid)-based LBIL, and cyclohexane followed by freeze-drying to remove the water and cyclohexane. Then, the peptide-LBIL complexes were nanodispersed and stabilized in isopropyl myristate (IPM) using sorbitol laurate (Span-20). Ionic-liquid-in-oil nanodispersions (IL/O-NDs) were prepared with varying weight ratios of LBILs and Span-20 as the surfactant and the cosurfactant, respectively. Keeping the overall surfactant constant at 10 wt % in IPM, a 5:5 wt % ratio of surfactant (IL) and cosurfactant (Span-20) in the IL/O-NDs significantly (p < 0.0001) increased the physiochemical stability, drug-loading capacity, and drug encapsulation efficiency. The in vitro and in vivo peptide delivery across the skin was increased significantly (p < 0.0001) using IL/O-NDs, compared with non-IL-treated groups. Of all of the LBIL-based formulations, [EDMPC][Linoleate]/O-ND was considered the most preferable for a TDDS based on the pharmacokinetic parameters. The transdermal delivery flux with [EDMPC][Linoleate]/O-ND was increased 65-fold compared with the aqueous delivery vehicle. The IL/O-NDs were able to deform the lipid and protein arrangements of the skin layers to enhance the transdermal permeation of the peptide. In vitro and in vivo cytotoxicity studies of the IL/O-NDs revealed the biocompatibility of the LBIL-based formulations. These results indicated that IL/O-NDs are promising biocompatible carriers for lipid-peptide TDDSs.
  10. Goh NY, Mohamad Razif MF, Yap YH, Ng CL, Fung SY
    Comput Biol Chem, 2022 Feb;96:107620.
    PMID: 34971900 DOI: 10.1016/j.compbiolchem.2021.107620
    Angiotensin-converting enzyme (ACE) regulates blood pressure and has been implicated in several conditions including lung injury, fibrosis and Alzheimer's disease. Medicinal mushroom Ganordema lucidum (Reishi) cystathionine beta-synthase (GlCBS) was previously reported to possess ACE inhibitory activities. However, the inhibitory mechanism of CBS protein remains unreported. Therefore, this study integrates in silico sequencing, structural and functional based-analysis, protein modelling, molecular docking and binding affinity calculation to elucidate the inhibitory mechanism of GlCBS and Lignosus rhinocerus (Tiger milk mushroom) CBS protein (LrCBS) towards ACE. In silico analysis indicates that CBSs from both mushrooms share high similarities in terms of physical properties, structural properties and domain distribution. Protein-protein docking analysis revealed that both GlCBS and LrCBS potentially modulate the C-terminal domain of ACE (C-ACE) activity via regulation of chloride activation and/or prevention of substrate entry. GICBS and LrCBS were also shown to interact with ACE at the same region that presumably inhibits the function of ACE.
  11. Din JU, Hameed S, Ali H, Norma-Rashid Y, Hasan Adli DS, Nawaz MA
    Saudi J Biol Sci, 2022 Jan;29(1):197-203.
    PMID: 35002409 DOI: 10.1016/j.sjbs.2021.08.071
    The snow leopard (Panthera uncia) inhabits one of the most challenging environments on Earth, referred to as the 'third pole'. Only a fraction of its vast range has been explored thus far, owing to myriad of barriers inflicted by the remote terrain and socio-ecological realities of the landscapes. Understanding distribution patterns of species is essential to devise practical management measures. This study aimed to understand the distribution pattern and factors influencing occupancy of snow leopard in the Pamir Mountain range through sign-based occupancy modelling. Our study confirmed that the Pamir range is a snow leopard stronghold, with occupancy estimated at 0.57 ± 0.02. The topographic features positively influenced the detection probability (p = 0.37 ± 0.005) of snow leopards. Occupancy was influenced by mean annual precipitation (β = -6.12 ± 1.8), density of roads (β = -1.61 ± 0.6) and water sources (β = 0.74 ± 0.4). Our findings underpin that sign-based distribution surveys provide vigorous scientific knowledge about elusive species and merit replication being used for other species. We propose to redefine the protected area boundaries based on ecological knowledge and encourage transboundary cooperation to safeguard snow leopards at a landscape scale.
  12. Aljunid SM, Al Bashir L, Ismail AB, Aizuddin AN, Rashid SAZA, Nur AM
    BMC Health Serv Res, 2022 Jan 05;22(1):34.
    PMID: 34986870 DOI: 10.1186/s12913-021-07428-7
    BACKGROUND: The decision to implement new vaccines should be supported by public health and economic evaluations. Therefore, this study was primarily designed to evaluate the economic impact of switching from partially combined vaccine (Pentaxim® plus hepatitis B) to fully combined vaccine (Hexaxim®) in the Malaysian National Immunization Program (NIP) and to investigate healthcare professionals (HCPs)' and parents'/caregivers' perceptions.

    METHODS: In this economic evaluation study, 22 primary healthcare centers were randomly selected in Malaysia between December 2019 and July 2020. The baseline immunization schedule includes switching from Pentaxim® (four doses) and hepatitis B (three doses) to Hexaxim® (four doses), whereas the alternative scheme includes switching from Pentaxim® (four doses) and hepatitis B (three doses) to Hexaxim® (four doses) and hepatitis B (one dose) administered at birth. Direct medical costs were extracted using a costing questionnaire and an observational time and motion chart. Direct non-medical (cost for transportation) and indirect costs (loss of productivity) were derived from parents'/caregivers' questionnaire. Also, HCPs' and parent's/caregivers' perceptions were investigated using structured questionnaires.

    RESULTS: The cost per dose of Pentaxim® plus hepatitis B vs. Hexaxim® for the baseline scheme was Malaysian ringgit (RM) 31.90 (7.7 United States dollar [USD]) vs. 17.10 (4.1 USD) for direct medical cost, RM 54.40 (13.1 USD) vs. RM 27.20 (6.6 USD) for direct non-medical cost, RM 221.33 (53.3 USD) vs. RM 110.66 (26.7 USD) for indirect cost, and RM 307.63 (74.2 USD) vs. RM 155.00 (37.4 USD) for societal (total) cost. A similar trend was observed for the alternative scheme. Compared with Pentaxim® plus hepatitis B, total cost savings per dose of Hexaxim® were RM 137.20 (33.1 USD) and RM 104.70 (25.2 USD) in the baseline and alternative scheme, respectively. Eighty-four percent of physicians and 95% of nurses supported the use of Hexaxim® in the NIP. The majority of parents/caregivers had a positive perception regarding Hexaxim® vaccine in various aspects.

    CONCLUSIONS: Incorporation of Hexaxim® within Malaysian NIP is highly recommended because the use of Hexaxim® has demonstrated substantial direct and indirect cost savings for healthcare providers and parents/caregivers with a high percentage of positive perceptions, compared with Pentaxim® plus hepatitis B.

    TRIAL REGISTRATION: Not applicable.

  13. Zainuddin AH, Aris AZ, Zaki MRM, Yusoff FM, Wee SY
    Mar Pollut Bull, 2022 Jan;174:113282.
    PMID: 34995888 DOI: 10.1016/j.marpolbul.2021.113282
    Extensive global plastic production has led to microplastic (MP) pollution of marine ecosystems. This study analysed the abundance of MPs in the surface water of tropical coastal and estuarine zones in Malaysia affected by rapid urbanisation and intense human activity. It also estimated the risk posed by MPs to the marine environment. Mean MP abundance ranged from 2.10 to 6.80 particles/L. Fourier-transform infrared spectroscopic analysis found that the MP polymers were dominated by cellophane (54%), followed by polyester (33%) and polyethylene (2%). The risk posed by MPs was estimated with the risk quotient (RQ) method which found no potential ecological risk to both coastal and estuarine areas (RQ 
  14. Arham AF, Amin L, Mustapa MAC, Mahadi Z, Yaacob M, Ibrahim M
    BMC Public Health, 2021 Dec 23;21(1):2314.
    PMID: 34949167 DOI: 10.1186/s12889-021-12166-w
    BACKGROUND: A recent approach in controlling dengue is by using the Wolbachia-infected Aedes mosquito (WiAM). The approach has been reported to be more effective than traditional methods, such as fogging. Therefore, it is imperative to assess the factors predicting its acceptance among stakeholders before implementing this technology more widely in Malaysia.

    METHODS: The survey data were collected from two primary stakeholder groups using a stratified random sampling technique. The two primary stakeholder groups were scientists (n = 202) and the public (n = 197) in the Klang Valley region of Malaysia, a hot spot area known for the high rate of dengue cases. The respondents answered questions on a seven-point Likert scale survey regarding trust in key players, attitudes toward nature versus materialism, religiosity, perceived benefits, perceived risks, attitudes, and intentions. The data were analyzed using Smart Partial Least Square (SmartPLS) software (version 3.2.6) to determine the predictors influencing attitudes and intentions to support the use of WiAM technology.

    RESULTS: The results indicated a strong positive relationship between attitudes and intentions to support the use of WiAM (β = 0.676, p 

  15. Mulyati S, Aprilia S, Muchtar S, Syamsuddin Y, Rosnelly CM, Bilad MR, et al.
    Polymers (Basel), 2022 Jan 03;14(1).
    PMID: 35012208 DOI: 10.3390/polym14010186
    Potential use of tannic acid (TA) as an additive for fabrication of polyvinylidene difluoride (PVDF) membrane was investigated. The TA was introduced by blending into the dope solution with varying concentrations of 0, 1, 1.5, and 2 wt%. The prepared membranes were characterized and evaluated for filtration of humic acid (HA) solution. The stability of the membrane under harsh treatment was also evaluated by one-week exposure to acid and alkaline conditions. The results show that TA loadings enhanced the resulting membrane properties. It increased the bulk porosity, water uptake, and hydrophilicity, which translated into improved clean water flux from 15.4 L/m2.h for the pristine PVDF membrane up to 3.3× for the TA-modified membranes with the 2 wt% TA loading. The flux recovery ratio (FRR) of the TA-modified membranes (FRRs = 78-83%) was higher than the pristine one (FRR = 58.54%), with suitable chemical stability too. The improved antifouling property for the TA-modified membranes was attributed to their enhanced hydrophilicity thanks to improved morphology and residual TA in the membrane matric.
  16. Sadiq M, Alajlani S, Hussain MS, Ahmad R, Bashir F, Chupradit S
    Environ Sci Pollut Res Int, 2022 Mar;29(14):20963-20975.
    PMID: 34748177 DOI: 10.1007/s11356-021-17276-x
    The role of risk assessment and capital structure is vital for the sustainable growth of firms and increasing the shareholders' wealth. This research explores the correlation between firm risk and capital structure using datasets from the sugar and cement sectors of Pakistan as a developing economy. This study is unique as it involved two firms of different nature (sugar firms operate seasonally while cement firms operate yearly) to view the real picture on the impact of risk and structure assessment on firms' credibility and shareholders' wealth. For this purpose, 15-year data (2000-2014) containing the financial statements of the target sectors were collected and the ANOVA analysis was applied with credit risk, liquidity risk, systematic risk, and firm size were used as the regressor variables, firm growth and dividend payout ratio as the control variables, and leverage as the regression variable. The findings showed that credit risk and liquidity risk are significantly correlated with leverage. This suggests that decision-makers pertaining to firms' risk and efficiency must focus more on risk to pursue a stronger and sustainable increase in shareholder wealth.
  17. Khan MUA, Razaq SIA, Mehboob H, Rehman S, Al-Arjan WS, Amin R
    Polymers (Basel), 2021 Oct 27;13(21).
    PMID: 34771258 DOI: 10.3390/polym13213703
    The treatment of successive skin wounds necessitates meticulous medical procedures. In the care and treatment of skin wounds, hydrogels produced from natural polymers with controlled drug release play a crucial role. Arabinoxylan is a well-known and widely available biological macromolecule. We produced various formulations of blended composite hydrogels (BCHs) from arabinoxylan (ARX), carrageenan (CG), and reduced graphene oxide (rGO) using and cross-linked them with an optimal amount of tetraethyl orthosilicate (TEOS). The structural, morphological, and mechanical behavior of the BCHs samples were determined using Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscope (SEM), mechanical testing, and wetting, respectively. The swelling and degradation assays were performed in phosphate-buffered saline (PBS) solution and aqueous media. Maximum swelling was observed at pH 7 and the least swelling in basic pH regions. All composite hydrogels were found to be hemocompatible. In vitro, silver sulfadiazine release profile in PBS solution was analyzed via the Franz diffusion method, and maximum drug release (87.9%) was observed in 48 h. The drug release kinetics was studied against different mathematical models (zero-order, first-order, Higuchi, Hixson-Crowell, Korsmeyer-Peppas, and Baker-Lonsdale models) and compared their regression coefficient (R2) values. It was observed that drug release follows the Baker-Lonsdale model, as it has the highest value (0.989) of R2. Hence, the obtained results indicated that, due to optimized swelling, wetting, and degradation, the blended composite hydrogel BCH-3 could be an essential wound dressing biomaterial for sustained drug release for skin wound care and treatment.
  18. Abouloula CN, Rizwan M, Selvanathan V, Yahya R, Althubeiti K, Alkhammash HI, et al.
    Polymers (Basel), 2021 Oct 26;13(21).
    PMID: 34771242 DOI: 10.3390/polym13213685
    This study explores the possibility of transforming lignocellulose-rich agricultural waste materials into value-added products. Cellulose was extracted from an empty fruit bunch of oil palm and further modified into carboxymethyl cellulose (CMC), a water-soluble cellulose derivative. The CMC was then employed as the polymeric content in fabrication of solid polymer electrolyte (SPE) films incorporated with lithium iodide. To enhance the ionic conductivity of the solid polymer electrolytes, the compositions were optimized with different amounts of glycerol as a plasticizing agent. The chemical and physical effects of plasticizer content on the film composition were studied by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analysis. FTIR and XRD analysis confirmed the interaction plasticizer with the polymer matrix and the amorphous nature of fabricated SPEs. The highest ionic conductivity of 6.26 × 10-2 S/cm was obtained with the addition of 25 wt % of glycerol. By fabricating solid polymer electrolytes from oil palm waste-derived cellulose, the sustainability of the materials can be retained while reducing the dependence on fossil fuel-derived materials in electrochemical devices.
  19. Alhothali A, Haneef T, Mustafa MRU, Moria KM, Rashid U, Rasool K, et al.
    PMID: 34770021 DOI: 10.3390/ijerph182111506
    Water pollution due to the discharge of untreated industrial effluents is a serious environmental and public health issue. The presence of organic pollutants such as polycyclic aromatic hydrocarbons (PAHs) causes worldwide concern because of their mutagenic and carcinogenic effects on aquatic life, human beings, and the environment. PAHs are pervasive atmospheric compounds that cause nervous system damage, mental retardation, cancer, and renal kidney diseases. This research presents the first usage of palm kernel shell biochar (PKSB) (obtained from agricultural waste) for PAH removal from industrial wastewater (oil and gas wastewater/produced water). A batch scale study was conducted for the remediation of PAHs and chemical oxygen demand (COD) from produced water. The influence of operating parameters such as biochar dosage, pH, and contact time was optimized and validated using a response surface methodology (RSM). Under optimized conditions, i.e., biochar dosage 2.99 g L-1, pH 4.0, and contact time 208.89 min, 93.16% of PAHs and 97.84% of COD were predicted. However, under optimized conditions of independent variables, 95.34% of PAH and 98.21% of COD removal was obtained in the laboratory. The experimental data were fitted to the empirical second-order model of a suitable degree for the maximum removal of PAHs and COD by the biochar. ANOVA analysis showed a high coefficient of determination value (R2 = 0.97) and a reasonable second-order regression prediction. Additionally, the study also showed a comparative analysis of PKSB with previously used agricultural waste biochar for PAH and COD removal. The PKSB showed significantly higher removal efficiency than other types of biochar. The study also provides analysis on the reusability of PKSB for up to four cycles using two different methods. The methods reflected a significantly good performance for PAH and COD removal for up to two cycles. Hence, the study demonstrated a successful application of PKSB as a potential sustainable adsorbent for the removal of micro-pollutants from produced water.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links