Displaying publications 41 - 60 of 106 in total

Abstract:
Sort:
  1. Yusof NM, Fadzli AS, Azman WS, Azril MA
    Med J Malaysia, 2016 04;71(2):47-52.
    PMID: 27326940 MyJurnal
    INTRODUCTION: The understanding of the skin's vascular anatomy has improved in the last decade. It has lead to technique modification such as the staged procedure in performing sural flaps and improvement in the flap survival rate. The aim of this study was to evaluate the acute vascular complications (flap necrosis or congestion) of 29 patients who underwent distal base sural flap for coverage of wound around the ankle.

    METHODS: Twenty-four males and five females with a mean age of 37.1 years old underwent sural flap surgery to cover wounds at around the ankle. There were 12 cases of open fracture, five infected fractures, four spoke injuries, four degloving injuries and four diabetic foot ulcers. Twentythree cases were done as a single stage procedure while six as a two-stage procedure. The flaps were tunnelled under the skin in three cases.

    RESULTS: Twenty one flaps healed uneventfully, seven acute vascular complications occur in a single stage group: five developed partial necrosis, one had congestion with epidermolysis, and one had complete flap necrosis. Complications were treated by dressing or skin grafting and only one required a repeat flap surgery.

    CONCLUSIONS: Acute vascular complications may be minimised when sural flap is done in stages for elderly, diabetic, smokers and/or patients with large wound around the ankle. Even if the flap appears necrotic, the underlying structure may still be covered as the fasciosubcutaneous layer of the flap may still survive.
  2. Ngadiman NH, Mohd Yusof N, Idris A, Kurniawan D
    Proc Inst Mech Eng H, 2016 Aug;230(8):739-49.
    PMID: 27194535 DOI: 10.1177/0954411916649632
    Electrospinning is a simple and efficient process in producing nanofibers. To fabricate nanofibers made of a blend of two constituent materials, co-axial electrospinning method is an option. In this method, the constituent materials contained in separate barrels are simultaneously injected using two syringe nozzles arranged co-axially and the materials mix during the spraying process forming core and shell of the nanofibers. In this study, co-axial electrospinning method is used to fabricate nanofibers made of polyvinyl alcohol and maghemite (γ-Fe2O3). The concentration of polyvinyl alcohol and amount of maghemite nanoparticle loading were varied, at 5 and 10 w/v% and at 1-10 v/v%, respectively. The mechanical properties (strength and Young's modulus), porosity, and biocompatibility properties (contact angle and cell viability) of the electrospun mats were evaluated, with the same mats fabricated by regular single-nozzle electrospinning method as the control. The co-axial electrospinning method is able to fabricate the expected polyvinyl alcohol/maghemite nanofiber mats. It was noticed that the polyvinyl alcohol/maghemite electrospun mats have lower mechanical properties (i.e. strength and stiffness) and porosity, more hydrophilicity (i.e. lower contact angle), and similar cell viability compared to the mats fabricated by single-nozzle electrospinning method.
  3. Mohd Yusof N, Muda AK, Pratama SF, Abraham A
    Mol Divers, 2023 Feb;27(1):71-80.
    PMID: 35254585 DOI: 10.1007/s11030-022-10410-y
    In computational chemistry, the high-dimensional molecular descriptors contribute to the curse of dimensionality issue. Binary whale optimization algorithm (BWOA) is a recently proposed metaheuristic optimization algorithm that has been efficiently applied in feature selection. The main contribution of this paper is a new version of the nonlinear time-varying Sigmoid transfer function to improve the exploitation and exploration activities in the standard whale optimization algorithm (WOA). A new BWOA algorithm, namely BWOA-3, is introduced to solve the descriptors selection problem, which becomes the second contribution. To validate BWOA-3 performance, a high-dimensional drug dataset is employed. The proficiency of the proposed BWOA-3 and the comparative optimization algorithms are measured based on convergence speed, the length of the selected feature subset, and classification performance (accuracy, specificity, sensitivity, and f-measure). In addition, statistical significance tests are also conducted using the Friedman test and Wilcoxon signed-rank test. The comparative optimization algorithms include two BWOA variants, binary bat algorithm (BBA), binary gray wolf algorithm (BGWOA), and binary manta-ray foraging algorithm (BMRFO). As the final contribution, from all experiments, this study has successfully revealed the superiority of BWOA-3 in solving the descriptors selection problem and improving the Amphetamine-type Stimulants (ATS) drug classification performance.
  4. Voon WWY, Muhialdin BJ, Yusof NL, Rukayadi Y, Meor Hussin AS
    Appl Biochem Biotechnol, 2019 Jan;187(1):211-220.
    PMID: 29915916 DOI: 10.1007/s12010-018-2807-2
    Bio-cellulose is the microbial extracellular cellulose that is produced by growing several microorganisms on agriculture by-products, and it is used in several food applications. This study aims to utilize sago by-product, coconut water, and the standard medium Hestrin-Schramm as the carbon sources in the culture medium for bio-cellulose production. The bacteria Beijerinkia fluminensis WAUPM53 and Gluconacetobacter xylinus 0416 were selected based on their bio-cellulose production activity. The structure was determined by Fourier transform infrared spectroscopy and scanning electron microscopy, while the toxicity safety was evaluated by brine shrimp lethality test. The results of Fourier transform infrared spectroscopy showed that the bio-cellulose produced by B. fluminensis cultivated in sago by-products was of high quality. The bio-cellulose production by B. fluminensis in the sago by-product medium was slightly higher than that in the coconut water medium and was comparable with the production in the Hestrin-Schramm medium. Brine shrimp lethality test confirmed that the bio-cellulose produced by B. fluminensis in the sago by-product medium has no toxicity, which is safe for applications in the food industry. This is the first study to determine the high potential of sago by-product to be used as a new carbon source for the bio-cellulose production.
  5. Ramalingam S, Samsuddin SM, Yusof N, Mohd S, Hanafi NN, Min NW, et al.
    J Orthop Surg (Hong Kong), 2018 4 27;26(2):2309499018770906.
    PMID: 29695196 DOI: 10.1177/2309499018770906
    PURPOSE: Bone allografts supplied by University Malaya Medical Centre Bone Bank are sterilized by gamma radiation at 25 kGy in dry ice (DI) to minimize radiation effects. Use of cheaper and easily available cooling materials, gel ice (GI) and ice pack (IP), was explored. Composites of DI and GI were also studied for the use in routine transportations and radiation process.

    METHODS: (a) Five dummy bones were packed with DI, GI, or IP in a polystyrene box. The bone temperatures were monitored while the boxes were placed at room temperature over 96 h. Durations for each cooling material maintaining freezing temperatures below -40°C, -20°C, and 0°C were obtained from the bone temperature over time profiles. (b) Composites of DI (20, 15, 10, 5, and 0 kg) and GI were used to pack five dummy bones in a polystyrene box. The durations maintaining varying levels of freezing temperature were compared.

    RESULTS: DI (20 kg) maintained temperature below -40°C for 76.4 h as compared to 6.3 h in GI (20 bags) and 4.0 h in IP (15 packs). Composites of 15DI (15 kg DI and 9 GI bags) and 10DI (10 kg DI and 17 GI bags) maintained the temperature below -40°C for 61 and 35.5 h, respectively.

    CONCLUSION: Composites of DI and GI can be used to maintain bones in deep frozen state during irradiation, thus avoiding radiation effects on biomechanical properties. Sterile frozen bone allograft with preserved functional properties is required in clinical applications.

  6. Mansor NA, Yusof N, Tang YL, Ithnin A, Azma RZ, Tumian NR, et al.
    Malays J Pathol, 2018 Aug;40(2):191-197.
    PMID: 30173238 MyJurnal
    INTRODUCTION: Essential thrombocythaemia (ET) is a chronic myeloproliferative neoplasm (MPN) characterised by persistent thombocytosis. It is an indolent disorder but transformation to myelofibrosis (MF), acute myeloid leukaemia (AML) or myelodyplastic syndrome (MDS) has been reported.

    CASE REPORT: We described a patient with ET whose disease evolved into MDS with fibrosis and complex karyotype after 15 years of stable disease. She was asymptomatic and was on hydroxyurea (HU) treatment until recently when she presented with worsening anaemia. Physical examination showed mild splenomegaly. Full blood picture showed leukoerythroblastic picture with presence of 3% circulating blasts and background of dysplastic features such as hypogranular cytoplasm and nuclear hyposegmentation of neutrophils. The bone marrow aspiration was haemodiluted but revealed presence of 6% blast cells, trilineage dysplasia and predominant erythroid precursors (60%). Trephine biopsy showed no excess of blast cells and normal quantity of erythroid precursors, but there was increased in fibrosis (WHO grade 2) and presence of dysmegakaryopoeisis such as nuclear hypolobation, multinucleation and micromegakaryocytes. Cytogenetic study showed complex karyotype; monosomy of chromosome 2, chromosome 5, chromosome 18 and presence of a marker chromosome (42~44, XX,-2,-5,-18,+mar). Fluorescence in situ hybridisation (FISH) showed 5q deletion (CSF1R and EGR1).

    CONCLUSION: The findings were consistent with transformation of ET to MDS with fibrosis and complex karyotype. ET progression to MDS is considered rare. The presence of complex karyotype and fibrosis in MDS are associated with unfavourable outcome.

  7. Ariffin AF, Yusof N, Mohd S, Rahman SA, Ramalingam S, Mansor A, et al.
    Cell Tissue Bank, 2019 Dec;20(4):527-534.
    PMID: 31456097 DOI: 10.1007/s10561-019-09785-4
    Calcium contents of demineralised human cortical bone determined by titrimetric assay and atomic absorption spectrophotometry technique were verified by comparing to neutron activation analysis which has high recovery of more than 90%. Conversion factors determined from the comparison is necessary to correct the calcium content for each technique. Femurs from cadaveric donors were cut into cortical rings and demineralised in 0.5 M hydrochloric acid for varying immersion times. Initial calcium content in the cortical bone measured by titration was 4.57%, only 21% of the measurement by neutron activation analysis; while measured by atomic absorption spectrophotometer was 13.4%, only 61% of neutron activation analysis. By comparing more readings with the measurements by neutron activation analysis with 93% recovery, a conversion factor of 4.83 was verified and applied for the readings by titration and 1.45 for atomic absorption spectrophotometer in calculating the correct calcium contents. The residual calcium content started to reduce after the cortical bone was demineralised in hydrochloric acid for 8 h and reduced to 13% after 24 h. Using the linear relationship, the residual calcium content could be reduced to less than 8% after immersion in hydrochloric acid for 40 h. Atomic absorption spectrophotometry technique is the method of choice for calcium content determination as it is more reliable compared to titrimetric assay.
  8. Yusof NH, Foo KY, Hameed BH, Hussin MH, Lee HK, Sabar S
    Int J Biol Macromol, 2020 Aug 15;157:648-658.
    PMID: 31790734 DOI: 10.1016/j.ijbiomac.2019.11.218
    Chitosan-polyethyleneimine with calcium chloride as ionic cross-linker (CsPC) was synthesized as a new kind of adsorbent using a simple, green and cost-effective technique. The adsorption properties of the adsorbent for Acid Red 88 (AR88) dye, as a model analyte, were investigated in a batch system as the function of solution pH (pH 3-12), initial AR88 concentration (50-500 mg L-1), contact time (0-24 h), and temperature (30-50 °C). Results showed that the adsorption process obeyed the pseudo-first order kinetic model and the adsorption rate was governed by both intra-particle and liquid-film mechanism. Equilibrium data were well correlated with the Freundlich isotherm model, with the calculated maximum adsorption capacity (qm) of 1000 mg g-1 at 30 °C. The findings underlined CsPC to be an effective and efficient adsorbent, which can be easily synthesized via one-step process with promising prospects for the removal of AR88 or any other similar dyes from the aqueous solutions.
  9. Ahmad SZN, Wan Salleh WN, Ismail AF, Yusof N, Mohd Yusop MZ, Aziz F
    Chemosphere, 2020 Jun;248:126008.
    PMID: 32006836 DOI: 10.1016/j.chemosphere.2020.126008
    The endless introduction of toxic heavy metals through industrialization has worsened the heavy metal pollution in the environment. Thus, the need for its effective removal has become more crucial than before. Studies on graphene-based nanomaterials and their use in removing heavy metals are gaining tremendous traction over the past decade. The properties of graphene oxide (GO), such as large surface areas, desired functional groups and excellent mechanical properties are advantageous. Nevertheless, due to its tendency to agglomerate and difficulty in phase separation after treatment, the functionalization of GO using various materials of different surface functional groups is an ongoing study. The surface modification of GO is done by using various materials to introduce heteroatoms, which have high affinity for heavy metals. This review summarizes the utilization of different surface functional groups, such as oxygen-containing, nitrogen-containing, and sulphur-containing functionalized graphene oxide composites in the adsorption of cationic and oxyanionic heavy metals. The toxicity of these heavy metals is also addressed. Furthermore, the interactions between adsorbents and heavy metals which are influenced by pH and surface functional groups, are also discussed in detail. This is followed by the review in adsorption isotherms and kinetics. Future research needs are also offered.
  10. Murizan NIS, Mustafa NS, Ngadiman NHA, Mohd Yusof N, Idris A
    Polymers (Basel), 2020 Nov 27;12(12).
    PMID: 33261121 DOI: 10.3390/polym12122818
    Nanocrystalline cellulose is an abundant and inexhaustible organic material on Earth. It can be derived from many lignocellulosic plants and also from agricultural residues. They endowed exceptional physicochemical properties, which have promoted their intensive exploration in biomedical application, especially for tissue engineering scaffolds. Nanocrystalline cellulose has been acknowledged due to its low toxicity and low ecotoxicological risks towards living cells. To explore this field, this review provides an overview of nanocrystalline cellulose in designing materials of bone scaffolds. An introduction to nanocrystalline cellulose and its isolation method of acid hydrolysis are discussed following by the application of nanocrystalline cellulose in bone tissue engineering scaffolds. This review also provides comprehensive knowledge and highlights the contribution of nanocrystalline cellulose in terms of mechanical properties, biocompatibility and biodegradability of bone tissue engineering scaffolds. Lastly, the challenges for future scaffold development using nanocrystalline cellulose are also included.
  11. Saad Eldeen Bakheet O, Yusof N, Raja Zahratul A, Ithnin A, Abdul Aziz S, Alias H
    Indian J Hematol Blood Transfus, 2016 Jun;32(Suppl 1):262-6.
    PMID: 27408409 DOI: 10.1007/s12288-015-0582-6
    Secondary sea-blue histiocytosis occurs more frequently than the primary form and occurs consequent to a wide range of metabolic and haematologic disorders including thalassaemia. We report an 18-year-old Chinese boy with transfusion-dependent HbE-beta thalassaemia who complained of pain and swelling at the left iliac crest region for 2 months duration. Physical examination revealed pallor with hepatosplenomegaly. Local examination revealed a huge swelling 12 cm × 12 cm in diameter, firm in consistency and tender. Histopathological examination of the mass revealed an osteosarcoma. His bone marrow aspirate showed numerous sea-blue histiocytes, the cytoplasm of which was closely packed with fine granules that stained blue with May-Grunwald-Giemsa. The nuclei were centrally located in some cells and displaced towards the periphery in other cells. There was no malignant cell infiltration in the marrow. The case is reported due to the co-incidental dual pathology in our patient (HbE-beta thalassaemia and osteosarcoma) and the unusual bone marrow finding of numerous sea-blue histiocytes.
  12. Arifin NFT, Yusof N, Nordin NAHM, Jaafar J, Ismail AF, Aziz F, et al.
    Mater Today Proc, 2021;46:1959-1962.
    PMID: 33680866 DOI: 10.1016/j.matpr.2021.02.379
    Since the emergence of the novel coronavirus disease (COVID-19) pandemic, intense research has been carried out to find the effective vaccine. However, this issue remains as a global challenge. Graphene has captured various attention due to promising antimicrobial and antiviral applications, hydrophobic characteristic and superior electrical conductivity. Recently, biomass derived graphene also promises great opportunity to combat the spread COVID-19. In this paper, we demonstrated the ability and role of biomass derived graphene as superhydrophobic coating, biosensors and disinfectant in the fight against COVID-19.
  13. Wan Ikhsan SN, Yusof N, Aziz F, Ismail AF, Jaafar J, Wan Salleh WN, et al.
    J Environ Manage, 2021 Jul 15;290:112565.
    PMID: 33873023 DOI: 10.1016/j.jenvman.2021.112565
    The vast amount of oily wastewater released to the environment through industrialization has worsened the water quality in recent years, posing adverse impacts on general human health. Oil emulsified in water is one of the most difficult mixtures to be treated, making it imperative for new technology to be explored to address this issue. The use of conventional water treatment such as flotation, coagulation, precipitation, adsorption, and chemical treatment have low separation efficiencies and high energy costs, and are not applicable to the separation of oil/water emulsions. Therefore, there is a demand for more efficient methods and materials for the separations of immiscible oil/water mixtures and emulsions. Superwetting materials that can repel oil, while letting water pass through have been widely explored to fit into this concern. These materials usually make use of simultaneous hydrophilic/oleophobic mechanisms to allow a solid surface to separate oily emulsion with little to no use of energy. Also, by integrating specific wettability concepts with appropriate pore scale, solid surfaces may achieve separation of multifarious oil/water mixtures namely immiscible oil/water blends and consolidated emulsions. In this review, materials used to impart superwetting in solid surfaces by focusing on superhydrophilic/superoleophobic wetting properties of the materials categorized into fluorinated and non-fluorinated surface modification are summarized. In each material, its background, mechanism, fabricating processes, and their effects on solid surface's wetting capability are elaborated in detail. The materials reviewed in this paper are mainly organic and green, suggesting the alternative material to replace the fluorine group that is widely used to achieve oleophobicity in oily wastewater treatment.
  14. Wan Ikhsan SN, Yusof N, Mat Nawi NI, Bilad MR, Shamsuddin N, Aziz F, et al.
    Polymers (Basel), 2021 Jan 30;13(3).
    PMID: 33573140 DOI: 10.3390/polym13030441
    Membrane filtration is an attractive process in water and wastewater treatment, but largely restricted by membrane fouling. In this study, the membrane fouling issue is addressed by developing polyethersulfone (PES)-based mixed matrix membranes (MMMs) with the incorporation of hydrophilic nanoparticles as an additive. Ultrafiltration MMMs were successfully fabricated by incorporating different loadings of halloysite nanotube-ferrihydrates (HNT-HFO) into a polyethersulfone (PES) matrix and their performance was evaluated for the separation of bovine serum albumin (BSA) solution and oil/water emulsion. The results show that wettability is endowed to the membrane by introducing the additive aided by the presence of abundant -OH groups from the HFO. The loading of additive also leads to more heterogeneous surface morphology and higher pure water fluxes (516.33-640.82 L/m2h) more than twice that of the pristine membrane as reference (34.69 L/m2h) without affecting the rejection. The MMMs also provide much enhanced antifouling properties. The filtration results indicate that the flux recovery ratio of the modified membrane reached 100% by washing with only distilled water and a total flux recovery ratio of >98% ± 0.0471 for HNT-HFO-loaded membranes in comparison with 59% ± 0.0169 for pristine PES membrane.
  15. Yang Harmony TC, Yusof N, Ramalingam S, Baharin R, Syahrom A, Mansor A
    Clin Orthop Relat Res, 2022 Feb 01;480(2):407-418.
    PMID: 34491235 DOI: 10.1097/CORR.0000000000001968
    BACKGROUND: Gamma irradiation, which minimizes the risk of infectious disease transmission when human bone allograft is used, has been found to negatively affect its biomechanical properties. However, in those studies, the deep-freezing temperature during irradiation was not necessarily maintained during transportation and sterilization, which may have affected the findings. Prior reports have also suggested that controlled deep freezing may mitigate the detrimental effects of irradiation on the mechanical properties of bone allograft.

    QUESTION/PURPOSE: Does a controlled deep-freezing temperature during irradiation help preserve the compressive mechanical properties of human femoral cortical bone allografts?

    METHODS: Cortical bone cube samples, each measuring 64 mm3, were cut from the mid-diaphyseal midshaft of five fresh-frozen cadaver femurs (four male donors, mean [range] age at procurement 42 years [42 to 43]) and were allocated via block randomization into one of three experimental groups (with equal numbers of samples from each donor allocated into each group). Each experimental group consisted of 20 bone cube samples. Samples irradiated in dry ice were subjected to irradiation doses ranging from 26.7 kGy to 27.1 kGy (mean 26.9 kGy) at a deep-freezing temperature below -40°C (the recommended long-term storage temperature for allografts). Samples irradiated in gel ice underwent irradiation doses ranging from 26.2 kGy and 26.4 kGy (mean 26.3 kGy) in a freezing temperature range between -40°C and 0°C. Acting as controls, samples in a third group were not subjected to gamma irradiation. The mechanical properties (0.2% offset yield stress, ultimate compression stress, toughness, and the Young modulus) of samples from each group were subsequently evaluated via axial compression loading to failure along the long axis of the bone. The investigators were blinded to sample group during compression testing.

    RESULTS: The mean ultimate compression stress (84 ± 27 MPa versus 119 ± 31 MPa, mean difference 35 [95% CI 9 to 60]; p = 0.005) and toughness (3622 ± 1720 kJ/m3 versus 5854 ± 2900 kJ/m3, mean difference 2232 [95% CI 70 to 4394]; p = 0.009) of samples irradiated at a higher temperature range (-40°C to 0°C) were lower than in those irradiated at deep-freezing temperatures (below -40°C). The mean 0.2% offset yield stress (73 ± 28 MPa versus 109 ± 38 MPa, mean difference 36 [95% CI 11 to 60]; p = 0.002) and ultimate compression stress (84 ± 27 MPa versus 128 ± 40 MPa, mean difference 44 [95% CI 17 to 69]; p < 0.001) of samples irradiated at a higher temperature range (-40°C to 0°C) were lower than the nonirradiated control group samples. The mean 0.2% offset yield stress (73 ± 28 MPa versus 101 ± 28 MPa, mean difference 28 [95% CI 3 to 52]; p = 0.02; effect size = 1.0 [95% CI 0.8 to 1.2]) of samples irradiated at higher temperature range (-40°C to 0°C) were no different with the numbers available to those irradiated at deep-freezing temperature. The mean toughness (3622 ± 1720 kJ/m3 versus 6231 ± 3410 kJ/m3, mean difference 2609 [95% CI 447 to 4771]; p = 0.02; effect size = 1.0 [95% CI 0.8 to 1.2]) of samples irradiated at higher temperature range (-40°C to 0°C) were no different with the numbers available to the non-irradiated control group samples. The mean 0.2% offset yield stress, ultimate compression stress, and toughness of samples irradiated in deep-freezing temperatures (below -40°C) were not different with the numbers available to the non-irradiated control group samples. The Young modulus was not different with the numbers available among the three groups.

    CONCLUSION: In this study, maintenance of a deep-freezing temperature below -40°C, using dry ice as a cooling agent, consistently mitigated the adverse effects of irradiation on the monotonic-compression mechanical properties of human cortical bone tissue. Preserving the mechanical properties of a cortical allograft, when irradiated in a deep-freezing temperature, may have resulted from attenuation of the deleterious, indirect effects of gamma radiation on its collagen architecture in a frozen state. Immobilization of water molecules in this state prevents radiolysis and the subsequent generation of free radicals. This hypothesis was supported by an apparent loss of the protective effect when a range of higher freezing temperatures was used during irradiation.

    CLINICAL RELEVANCE: Deep-freezing temperatures below -40°C during gamma irradiation may be a promising approach to better retain the native mechanical properties of cortical bone allografts. A further study of the effect of deep-freezing during gamma radiation sterilization on sterility and other important biomechanical properties of cortical bone (such as, tensile strength, fracture toughness, and fatigue) is needed to confirm these findings.

  16. Baqutayan SM, Mahdzir AM, Yusof NAM, Saimy IS, Salleh SH
    Eur Rev Med Pharmacol Sci, 2021 Aug;25(16):5215-5227.
    PMID: 34486696 DOI: 10.26355/eurrev_202108_26535
    OBJECTIVE: Gender is an aspect of the natural identity of a person that has been given ample attention in socio-cultural, psychological, and political studies worldwide. Transgender, which is a part of gender issues, is still lacking in information on definitions of transgender, its causes, society's perceptions toward it, and interpretations on transgender action. Transgender is an umbrella term that describes people whose gender identity or expression does not match the sex they have been assigned at birth. It is one of the most important signs of progress produced by scientific advancement in the field of medicine, which is a relatively new phenomenon. Due to the lack of research on transgender, researchers study this issue at the theoretical and public opinion levels and from different perspectives. The objectives are to provide insights into the landscape of gender issues, instill awareness among communities and make them understand the psychological pains and the emotional difficulties that the transgender go through. Transgender issues must be analyzed from the perspectives of humanity, ethics, and culture.

    MATERIALS AND METHODS: Data were gathered through open-ended interviews among nine participants. And to complement the data, particularly about the public's opinions toward the transgender, a focus group discussion (FGD) was held among four participants.

    RESULTS: The findings indicate that the transgender community often faces social discrimination due to the social stigma towards them. Thus, the treatment should be more on psychological therapies, family education, community awareness, and social activism that are needed to realign the transgender to the right track.

    CONCLUSIONS: This study provides insights into the landscape of gender equality and ways to support those with gender identity issues. Hence, this research carries values to the Sustainable Development Goals (SDG) in enhancing the policy on gender equality.

  17. Ahmad Sabri NS, Mohd Zulkeflle SN, Yusof N, Md Akhir FN, Othman N, Zakaria Z, et al.
    Microbiol Resour Announc, 2021 May 06;10(18).
    PMID: 33958405 DOI: 10.1128/MRA.00332-21
    Staphylococcus spp. are Gram-positive bacteria that reside within the normal microbiota of humans and animals but pose a health threat as reservoirs of antimicrobial resistance genes. Here, we present the draft genome sequences of three Staphylococcus sp. strains isolated from hospital wastewater in Malaysia that demonstrated resistance to multiple antibiotics.
  18. Lee SY, Pereira BP, Yusof N, Selvaratnam L, Yu Z, Abbas AA, et al.
    Acta Biomater, 2009 Jul;5(6):1919-25.
    PMID: 19289306 DOI: 10.1016/j.actbio.2009.02.014
    A poly(vinyl alcohol) (PVA) hydrogel composite scaffold containing N,O-carboxymethylated chitosan (NOCC) was tested to assess its potential as a scaffold for cartilage tissue engineering in a weight-bearing environment. The mechanical properties under unconfined compression for different hydration periods were investigated. The effect of supplementing PVA with NOCC (20wt.% PVA:5vol.% NOCC) produced a porosity of 43.3% and this was compared against a non-porous PVA hydrogel (20g PVA: 100ml of water, control). Under non-hydrated conditions, the porous PVA-NOCC hydrogel behaved in a similar way to the control non-porous PVA hydrogel, with similar non-linear stress-strain response under unconfined compression (0-30% strain). After 7days' hydration, the porous hydrogel demonstrated a reduced stiffness (0.002kPa, at 25% strain), resulting in a more linear stiffness relationship over a range of 0-30% strain. Poisson's ratio for the hydrated non-porous and porous hydrogels ranged between 0.73 and 1.18, and 0.76 and 1.33, respectively, suggesting a greater fluid flow when loaded. The stress relaxation function for the porous hydrogel was affected by the hydration period (from 0 to 600s); however the percentage stress relaxation regained by about 95%, after 1200s for all hydration periods assessed. No significant differences were found between the different hydration periods between the porous hydrogels and control. The calculated aggregate modulus, H(A), for the porous hydrogel reduced drastically from 10.99kPa in its non-hydrated state to about 0.001kPa after 7days' hydration, with the calculated shear modulus reducing from 30.92 to 0.14kPa, respectively. The porous PVA-NOCC hydrogel conformed to a biphasic, viscoelastic model, which has the desired properties required for any scaffold in cartilage tissue engineering.
  19. Mohd Zohdi R, Abu Bakar Zakaria Z, Yusof N, Mohamed Mustapha N, Abdullah MN
    PMID: 21941590 DOI: 10.1155/2012/843025
    A novel cross-linked honey hydrogel dressing was developed by incorporating Malaysian honey into hydrogel dressing formulation, cross-linked and sterilized using electron beam irradiation (25 kGy). In this study, the physical properties of the prepared honey hydrogel and its wound healing efficacy on deep partial thickness burn wounds in rats were assessed. Skin samples were taken at 7, 14, 21, and 28 days after burn for histopathological and molecular evaluations. Application of honey hydrogel dressings significantly enhanced (P < 0.05) wound closure and accelerated the rate of re-epithelialization as compared to control hydrogel and OpSite film dressing. A significant decrease in inflammatory response was observed in honey hydrogel treated wounds as early as 7 days after burn (P < 0.05). Semiquantitative analysis using RT-PCR revealed that treatment with honey hydrogel significantly (P < 0.05) suppressed the expression of proinflammatory cytokines (IL-1α, IL-1β, and IL-6). The present study substantiates the potential efficacy of honey hydrogel dressings in accelerating burn wound healing.
  20. Nur Asyura Adznam S, Shahar S, Rahman SA, Yusof NA, Arshad F, Yassin Z, et al.
    J Nutr Health Aging, 2009 Dec;13(10):925-30.
    PMID: 19924355
    OBJECTIVE: Prior to the development of a healthy ageing and risk reduction of chronic diseases intervention package for older people in Malaysia, a need assessment study was conducted to identify nutritional knowledge status and information needs, as part of an action research process.

    DESIGN: A cross sectional study was conducted among 267 elderly people, 54 care givers and 66 health professionals in two rural areas of Peninsular of Malaysia (i.e Sabak Bernam, Selangor and Kuala Pilah, Negeri Sembilan). Information on nutritional knowledge was obtained from an interview based questionnaire for older subjects and caregiver and through self administered questionnaire from the health professionals. Anthropometric and functional measurements were also conducted among elderly subjects.

    RESULTS: It was found that the elderly subjects had poor nutritional knowledge with 43.8% of them classified as having unsatisfactory nutritional knowledge, followed by moderately satisfactory (33.7%), very unsatisfactory (15.7%) and good (6.7%). Talks, counselling sessions with health professionals and electronic media such as television and radio were the most preferred nutrition education sources among elderly subjects and their care givers. The majority of health professionals studied (98.5%) had good nutritional knowledge. Although most of them (93.6%) were involved in management of the elderly, only 45.5% incorporated nutritional information component in this activity. Most of the health professionals used the guidelines for management of elderly patients (63.6%). However, nutritional knowledge was very minimal in these guidelines. Multiple regression analysis indicated that 'level education', involvement in 'social activities', presence of 'hearing problems', the Instrumental Activities of Daily Living (IADL) score, having previous 'nutritional information' and 'participation in healthy eating programme' were the major predictors of nutritional knowledge score among elderly subjects.

    CONCLUSION: Based on the above findings it is thus, imperative that an appropriate nutritional intervention package and programme be developed so as to help improve nutritional knowledge and subsequently the nutritional status of the rural elderly Malays.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links