Displaying publications 61 - 80 of 199 in total

Abstract:
Sort:
  1. Singh S, Srivastava B, Gupta K, Gupta N, Singh R, Singh S
    Int J Clin Pediatr Dent, 2020 8 4;13(2):119-123.
    PMID: 32742086 DOI: 10.5005/jp-journals-10005-1718
    Aim and objective: The aim of this study was to evaluate and compare the antifungal efficacy of MTA Fillapex, Metapex, zinc oxide eugenol cement, Endomethasone, and Endoflas against Candida albicans.

    Materials and methods: Root canal exudates of 30 patients were tested against MTA Fillapex (Angelus), Metapex (BioMed), zinc oxide eugenol (Deepak Enterprise), Endomethasone (Septodont), Endoflas FS (Sanlor Laboratories), MTA (Angelus) (positive control), and glycerine (negative control). Children with failed endodontic cases were included in the study. Tube dilution and agar diffusion methods were used to check the antifungal efficacy of the root canal sealers. In tube dilution method, 24-well culture plates containing freshly mixed material along with Candida albicans were used. Wells containing MTA (Angelus) along with Sabouraud dextrose agar and Candida albicans served as positive control while glycerine along with Sabouraud dextrose agar and Candida albicans served as negative control. All plates were incubated at 37°C for 24 hours. Growth of the fungi was monitored after 24 hours by the presence of the turbidity. The samples were recultured to test the experimental material using agar well diffusion method, and the Petri plates were incubated for 24 hours and 72 hours. Zone of inhibition was measured after respective time period. Paired t test was used for the data analysis.

    Results: It was seen in tube dilution method Endomethasone showed least turbidity while maximum was shown by Metapex; similar results were seen in case of agar well diffusion method in which largest zone of inhibition was shown by Endomethasone while smallest was by Metapex.

    Conclusion: It was concluded that Endomethasone showed maximum efficacy against Candida albicans as compared to Metapex.

    How to cite this article: Singh S, Srivastava B, Gupta K, et al. Comparative Evaluation of Antifungal Efficacy of Five Root Canal Sealers against Clinical Isolates of Candida albicans: A Microbiological Study. Int J Clin Pediatr Dent 2020;13(2):119-123.

    Matched MeSH terms: Dental Pulp Cavity
  2. Karobari MI, Khijmatgar S, Noorani TY, Assiry A, Alharbi T
    J Conserv Dent, 2021 02 10;23(5):518-521.
    PMID: 33911363 DOI: 10.4103/JCD.JCD_220_19
    Objective: The aim of this study is to determine the role of clinical audit in improving endodontic treatment outcomes.

    Materials and Methods: An audit at the department of endodontics at dental specialty centre kingdom of Saudi Arabia was carried out. The audit was conducted by developing endodontics treatment and success predictors based on evidence, that can be measured for endodontic care. A total of 12 months' data was examined from the previous dental records. Ten clinical cards were which included root canal treatment were selected. The audit was carried out for a minimum of 50 teeth and a maximum of 200 teeth. The radiographs of record cards were studied and a single dentist completed the audit tool.

    Results: The vitality test was performed in 1.98% cases, intra-canal medicament was used and named in 3.96% cases, 3.96% the teeth were extracted due to endodontic failure. Further, in 6.93% of the cases that were identified had certain spaces but overall root canal filling was evaluated as satisfactory.

    Conclusion: The vitality test, type of intracanal medicament, and assessment of root canal filling were not done, but there was an overall performance of predictors for endodontic treatment.

    Matched MeSH terms: Dental Pulp Cavity
  3. Chia MSY, Parolia A, Lim BSH, Jayaraman J, Porto ICCM
    Restor Dent Endod, 2020 Aug;45(3):e28.
    PMID: 32839709 DOI: 10.5395/rde.2020.45.e28
    Objectives: To evaluate the outcome of in vitro studies comparing the effectiveness of QMix irrigant in removing the smear layer in the root canal system compared with other irrigants.

    Materials and Methods: The research question was developed by using Population, Intervention, Comparison, Outcome and Study design framework. Literature search was performed using 3 electronic databases PubMed, Scopus, and EBSCOhost until October 2019. Two reviewers were independently involved in the selection of the articles and data extraction process. Risk of bias of the studies was independently appraised using revised Cochrane Risk of Bias tool (RoB 2.0) based on 5 domains.

    Results: Thirteen studies fulfilled the selection criteria. The overall risk of bias was moderate. QMix was found to have better smear layer removal ability than mixture of tetracycline isonomer, an acid and a detergent (MTAD), sodium hypochlorite (NaOCl), and phytic acid. The efficacy was less effective than 7% maleic acid and 10% citric acid. No conclusive results could be drawn between QMix and 17% ethylenediaminetetraacetic acid due to conflicting results. QMix was more effective when used for 3 minutes than 1 minute.

    Conclusions: QMix has better smear layer removal ability compared to MTAD, NaOCl, Tubulicid Plus, and Phytic acid. In order to remove the smear layer more effectively with QMix, it is recommended to use it for a longer duration.

    Matched MeSH terms: Dental Pulp Cavity
  4. Lin GSS, Ghani NRNA, Noorani TY
    Odontology, 2021 Jul;109(3):672-678.
    PMID: 33458795 DOI: 10.1007/s10266-021-00589-1
    To compare the microhardness and crack formation in root dentine presented with butterfly effect in lower premolars. Sixty mature lower premolars were selected and divided into the control and experimental groups. Teeth in the experimental group were instrumented up to size 30/.04. The roots were cut horizontally into twelve parts of 1-mm-thick cross-section and were numbered accordingly. They were divided into coronal, middle, and apical root sections. Sections were then viewed under a microscope to determine the presence of butterfly effect and subsequently scored. 8 teeth from both control and experimental groups with the highest and lowest score were selected. Crack formation was inspected and classified into four different types of cracks. Microhardness test was performed using a Vickers hardness test. Higher frequency of butterfly effect was found in the apical root section and root dentine with butterfly effect were harder mesiodistally. The middle and apical root sections with butterfly effect were harder than the coronal section. No significant difference of dentine hardness between the control and experimental groups. Cracks only occurred in the experimental group and presented in buccolingual direction with a higher rate of Type 1 and Type 2 cracks. Prevalence of butterfly effect in lower premolars increased from coronal to apical with increased hardness mesiodistally. More buccolingual cracks were found in radicular dentine with butterfly effect and most of them exhibited Type 1 and Type 2 cracks. Roots of lower premolar with butterfly effect may be susceptible to a higher rate of vertical root fracture in buccolingual direction, especially after root canal treatment. Thus, special attention should be given not to overload instruments during root canal preparation.
    Matched MeSH terms: Dental Pulp Cavity
  5. Lim, Siau Peng, Fazal Reza, Zaihan Ariffin
    MyJurnal
    The purpose of this study was to evaluate hardness (indicator for polymerization) and thickness of two types of resin cement at coronal, middle and apical level of tooth root canal. Ten extracted maxillary incisors were instrumented and post space was prepared for cementation of titanium post. Samples were divided into two groups and each group was cemented either of the two types of resin cements; Panavia F [dual-cured (PF)] and Rely X Luting 2 [self-cured (RL)]. The teeth were longitudinally sectioned; hardness and thickness was measured using Vickers hardness tester and a microscope (Leica DMLM). SEM observations along the cement line at the 3 different root levels were performed. Statistical analysis was performed to test significance of differences in hardness and thickness of the two types of cement (t-test; p= 0.05) and at different levels of the same type (one-way ANOVA followed by multiple comparison; p= 0.05). Significant difference of hardness was found at the apical level between the two groups and between the coronal and apical level of PF (p0.05). Moreover, voids were more obvious within the dual-cured group of cement. Dual-cured resin cement was found to be less polymerized than self-cured type at apical level. Increased thicknesses of resin cements in comparison to post space size were observed in both groups. Use of metallic post with resin cements needs further evaluation.
    Matched MeSH terms: Dental Pulp Cavity
  6. Che Ab Aziz, Z.A., Baharin, S.A., Spratt, D., Gulabivala, K.
    Ann Dent, 2009;16(1):1-8.
    MyJurnal
    This study aimed to detect the presence of enterococci in the root canals of untreated and treated teeth with periapical disease and to compare this to their presence in the saliva and in the immediate surgical environment during root canal treatment. Using an aseptic technique, 33 samples were obtained from 27 untreated and 6 previously treated teeth associated with apical periodontitis. Reduced Transport Fluid (RTF) was used as transport medium. Saliva samples and areas in the surgical environment were also sampled. These were performed prior to chemo-mechanical debrjdement and obturation for every case. The saliva was diluted to 10- J and was plated on Bile Aesculin Azide (BEA) agar whereas the rest of the samples were plated on Bile Aesculin (BE) agar. These plates were then incubated aerobically at 37°C for 48 hours. All the colony types that blackened the agar were sub-cultured to obtain pure isolates and tested on 6.5% sodium chloride (NaCI). Growth on this medium was Gram stained for further confirmation of cell morphology. Gram positive cocci isolated from previous positive test were identified as enterococci. Enterococci were recovered from untreated cases only; from 2 teeth (in 2 patients) prior to chemo-mechanical debridement, from 3 teeth (in 3 patients) prior to obturation and I from saliva sample. A 'total of 5 samples from 5 different patients were positive for enteroco•cci. Sampling in the immediate surgical environment revealed a low occurence in the range of3.0% (1/33) to 15_2% (5/33). In conclusion, the occurence of enterococci in patients and the immediate surgical environment was low number.
    Matched MeSH terms: Dental Pulp Cavity
  7. Abdullah, M., Che Ab Aziz, Z.A., Roslan Saub, Murat, N., Sulaiman, E., Hashim, N., et al.
    Ann Dent, 2009;16(1):9-14.
    MyJurnal
    The objectives of this study were to assess the practice of molar root canal treatment (RCT) among general dental practitioners (GDPs), confidence level of GDPs in performing molar RCT and to identify factors that influence their confidence in managing molar RCI. One hundred questionnaires were distributed to GDPs in Kuala Lumpur and Selangor. Fifty questionnaires were delivered by mail and the remaining fifty were hand-delivered. All data was coded and verified. Fiftysix OOPs rcsponded to the questionnaires. Only fortyfive questionnaires were accepted (n=45) as eleven OOPs had never performed molar RCI. Most of the OOPs followed the standard quality guidelines while performing molar RCT except for vitality testing (36.4%) and rubber dam usage (27.3%). In this study, 100% of the GDPs were confident in making diagnosis of perinidicular diseases and 95.4% were confident in performing molar RCT from history taking until obturation. Patients' tolerance and availability of instruments and materials (97.7%) were two factors that most influence the GDPs' confidence level. The. least influcncing factor was undergraduate training (78.1 %). Attending seminars and lectures on endodontic, large number of molar teeth treated for ReT, patLents' affordability to pay for RCT and postgraduate training also influencc GDPs' confidence to a certain degree. From this study, it can be concluded that majority of OOPs complied standard quality guidelines except for vitality testing and rubber dam usage. Most of them were confident in performing molar RCT and were greatly influenced by the availability or"instruments and materials in their clinic and patients' tolerance in receiving molar RCI.
    Matched MeSH terms: Dental Pulp Cavity
  8. Che Ab Aziz, Z.A., Abdullah, M., Vello, C.D.S., Thangavelu, K.
    Ann Dent, 2006;13(1):12-17.
    MyJurnal
    Background: Majority of root canal treatment in Malaysia was provided by general dental practitioner. The purpose of this study was to evaluate the knowledge and practice (canal’s preparation, use of materials) by them. Methods: A questionnaire was structured and distributed to 120 registered general dental practitioners in selected areas in Perak, Johor and Klang Valley regarding the provision of root canal therapy in their practices. The questionnaires were hand delivered and collected after 1 to 2 weeks. Results: Reply rate was 95% (n=114). The result demonstrated that 62% respondents indicated that they performed the root canal therapy (RCT) themselves. Out of these only 26% included molars in the treatment. Three quarters of them (77%) used step-back technique and 54% used stainless steel instruments to prepare the canals. The majority of the respondents (69%) used calcium hydroxide as intracanal medicaments. Only 30% used rubber dam for isolation whereas the rest used cotton rolls. The numbers of routine radiographs taken were two for anterior teeth and three for molar. Half of the respondents indicated that they usually completed the RCT for the anterior tooth within two visits whereas three visits were needed for the molar tooth. The results were analyzed descriptively. Conclusions: This study indicates that most of the general dental practitioners’ do not comply with quality standards guidelines such as use of rubber dam as isolation. Cotton roll was the most popular isolation method. In spite of this, most of the respondents tend to update their knowledge and practices with current techniques and materials.
    Matched MeSH terms: Dental Pulp Cavity
  9. Lim, T.W., Goh, A.C., Seow, L.L.
    Malaysian Dental Journal, 2007;28(2):122-131.
    MyJurnal
    The aim of the present study was to assess the current approaches and philosophies pertaining to direct restorations, bleaching and root canal treatment amongst general dental practitioners (GDPs) in the Klang Valley, Malaysia. A questionnaire, together with a stamped addressed envelope and an explanatory letter, was sent to 200 GDPs in the Klang Valley in April-July 2005. The GDPs were selected at random. A total of 153 (76.5%) of the GDPs responded to the survey. 46.4% of the respondents stated that the use of amalgam was decreasing whereas 79.7% stated an increase in the use of composite resins. Clinical indication (85.6%) and patients’ demand for aesthetics (73.9%) appeared to be the main factors influencing the choice of restorative materials. Fractured restorations was the main reason for the replacement of amalgam restorations (77.1%) whilst secondary caries was the main reason for the replacement of composite resin restorations (73.9%). Almost two thirds of the GDPs surveyed provided chair side bleaching while 75.8% of the GDPs would supervise home bleaching. Sodium hypochlorite was the most common endodontic irrigant used amongst the GDPs surveyed and cold lateral compaction was the most commonly used obturation technique.
    Matched MeSH terms: Dental Pulp Cavity
  10. Ibrahim MD, Amran SNA, Yunos YS, Rahman MRA, Mohtar MZ, Wong LK, et al.
    Appl Bionics Biomech, 2018;2018:7854321.
    PMID: 29853998 DOI: 10.1155/2018/7854321
    The skin of a fast swimming shark reveals riblet structures that help reduce the shark's skin friction drag, enhancing its efficiency and speed while moving in the water. Inspired by the structure of the shark skin denticles, our team has carried out a study as an effort in improving the hydrodynamic design of marine vessels through hull design modification which was inspired by this riblet structure of shark skin denticle. Our study covers on macroscaled design modification. This is an attempt to propose an alternative for a better economical and practical modification to obtain a more optimum cruising characteristics for marine vessels. The models used for this study are constructed using computer-aided design (CAD) software, and computational fluid dynamic (CFD) simulations are then carried out to predict the effectiveness of the hydrodynamic effects of the biomimetic shark skins on those models. Interestingly, the numerical calculated results obtained show that the presence of biomimetic shark skin implemented on the vessels give about 3.75% reduction of drag coefficient as well as reducing up to 3.89% in drag force experienced by the vessels. Theoretically, as force drag can be reduced, it can lead to a more efficient vessel with a better cruising speed. This will give better impact to shipping or marine industries around the world. However, it can be suggested that an experimental procedure is best to be conducted to verify the numerical result that has been obtained for further improvement on this research.
    Matched MeSH terms: Dental Pulp Calcification
  11. Amanina Fatinah Kamarudin, Najian Ibrahim, Thirumulu Ponnuraj Kannan, Ahmad Aizat Abdul Aziz
    MyJurnal
    Perivitelline fluid, extracted from the fertilized eggs of horseshoe crabs, has been reported to play a
    vital role in supporting embryogenesis as well as cell proliferation. The present study aims to evaluate the effect
    of PVF on the expression of COL1A1 in human dental pulp stem cells (DPSCs). The cells were grouped into two;
    untreated (control) and treated with a single dose of PVF (0.019 mg/ml). Gene expression was quantified for
    COL1A1 on day 1, 3 and 7 using reverse transcriptase PCR. The expression of COL1A1 on day 3 of treated
    group with PVF was the highest though there was a decline of COL1A1 expression on day 7. Mann Whitney test
    was utilized to determine the significance of COL1A1 expression between treated and untreated groups.
    Significant difference in the expression of COL1A1 was observed between the treated and untreated groups on
    day 3 though there was no significance in the expression on day 7. The present study indicates that PVF may
    have the potential to increase cell proliferation in human DPSCs.
    Matched MeSH terms: Dental Pulp
  12. Deng PU, Halim MS, Masudi SM, Al-Shehadat S, Ahmad B
    Eur J Dent, 2018 8 28;12(3):410-416.
    PMID: 30147408 DOI: 10.4103/ejd.ejd_82_18
    Objective: The aim of this study is to investigate the variations in the number of root and canal in the mandibular first permanent molars (MFPMs) teeth in East Coast Malaysian population using cone-beam computed tomography (CBCT).

    Materials and Methods: CBCT images which show MFPMs recorded in HUSM Dental Clinic between January 2015 and June 2016 was obtained and analyzed for their number of roots and canals. A total of 208 CBCT images of MFPMs were collected; 118 patients had unilateral molars and 90 patients had bilateral molars. The following observations were made: (1) root number; (2) number of canals per root; and (3) comparisons of number of roots and canals according to gender, ethnicity, and position.

    Results: The majority of cases of bilateral MFPM had the same number of roots (95.6%, 95% confidence interval [CI]: 89.01%, 98.78%) on both the right and left side and only 4 cases (4.4%, 95% CI: 1.22%, 10.99%) had 3 roots on the right and 2 roots on the left sides. The majority of cases had the same number of canals on both sides (66.7%, 95% CI: 55.95, 76.26%) and 33.3% (95% CI: 23.74%, 44.05%) with unequal number of canals. The occurrence of the number of canals was not independent of the sides of the arch (P < 0.001) and there was statistically significantly greater proportion of cases who had greater number of canals on the right side than the left (P = 0.03). The prevalence of right single-rooted MFPM was very small at 0.3% (n = 1) in a Malay male (95% CI: 0.00, 1.83) and the most prevalent was two roots first molar (88.4%). The number of roots was not associated with sex or ethnic group (P > 0.05). The MFPM with a single root was found to have only one mesial canal. For two rooted MFPM, the most prevalent occurrence was two canals at the mesial and one canal at the distal roots (59%); followed by single canals in each mesial and distal (21%) and double canals per root (18%). Three roots MFPM have either single or double canals in the mesial root and double canals in the distal root.

    Conclusions: The majority of population in the East Coast region of Malaysia has two roots and three root canals in their MFPMs. There was no difference in the number of roots between gender and ethnic and canals between ethnic.

    Matched MeSH terms: Dental Pulp Cavity
  13. Chum JD, Lim DJZ, Sheriff SO, Pulikkotil SJ, Suresh A, Davamani F
    Restor Dent Endod, 2019 Feb;44(1):e8.
    PMID: 30834230 DOI: 10.5395/rde.2019.44.e8
    Objectives: Irrigants are imperative in endodontic therapy for the elimination of pathogens from the infected root canal. The present study compared the antimicrobial efficacy of octenidine dihydrochloride (OCT) with chlorhexidine (CHX) and sodium hypochlorite (NaOCl) against Staphylococcus epidermidis (S. epidermidis) for root canal disinfection.

    Materials and Methods: The minimum inhibitory concentration (MIC) was obtained using serial dilution method. The agar diffusion method was then used to determine the zones of inhibition for each irrigant. Lastly, forty 6-mm dentin blocks were prepared from human mandibular premolars and inoculated with S. epidermidis. Samples were randomly divided into 4 groups of 10 blocks and irrigated for 3 minutes with saline (control), 2% CHX, 3% NaOCl, or 0.1% OCT. Dentin samples were then collected immediately for microbial analysis, including an analysis of colony-forming units (CFUs).

    Results: The MICs of each tested irrigant were 0.05% for CHX, 0.25% for NaOCl, and 0.0125% for OCT. All tested irrigants showed concentration-dependent increase in zones of inhibition, and 3% NaOCl showed the largest zone of inhibition amongst all tested irrigants (p < 0.05). There were no significant differences among the CFU measurements of 2% CHX, 3% NaOCl, and 0.1% OCT showing complete elimination of S. epidermidis in all samples.

    Conclusions: This study showed that OCT was comparable to or even more effective than CHX and NaOCl, demonstrating antimicrobial activity at low concentrations against S. epidermidis.

    Matched MeSH terms: Dental Pulp Cavity
  14. Ong TK
    Eur Endod J, 2019;4(3):145-149.
    PMID: 32161902 DOI: 10.14744/eej.2019.03016
    A 27-year-old male patient complained of dental pain on previously root-treated tooth #17. Intentional replantation (IR) was performed. However, the symptoms returned at 10 months of follow-up, and a sinus tract was detected on the buccal gingiva of tooth #17. The patient refused extraction of the tooth and tooth was scheduled for non-surgical retreatment. Root canal retreatment was initiated with the removal of the previous root filling material while leaving the retrograde filling in situ. After 1 month of intracanal medication, the tooth became asymptomatic with complete healing of the sinus tract and the root canal filling was completed. Clinical and radiographic examination at 1 year follow-up revealed endodontic success with complete resolution of periapical radiolucency. This case report shows that non-surgical retreatment could be a viable alternative for failed IR.
    Matched MeSH terms: Dental Pulp Cavity
  15. Ballester B, Giraud T, Ahmed HMA, Nabhan MS, Bukiet F, Guivarc'h M
    Clin Oral Investig, 2021 Nov;25(11):6027-6044.
    PMID: 34623506 DOI: 10.1007/s00784-021-04080-7
    OBJECTIVES: To assess related studies and discuss the clinical implications of endodontic access cavity (AC) designs.

    MATERIALS AND METHODS: A systematic review of studies comparing the fracture resistance and/or endodontic outcomes between different AC designs was conducted in two electronic search databases (PubMed and Web of Science) following the PRISMA guidelines. Study selection, data extraction, and quality assessment were performed. Meta-analyses were undertaken for fracture resistance and root canal detection, with the level of significance set at 0.05 (P = 0.05).

    RESULTS: A total of 33 articles were included in this systematic review. The global evaluation of the risk of bias in the included studies was assessed as moderate, and the level of evidence was rated as low. Four types of AC designs were categorized: traditional (TradAC), conservative (ConsAC), ultraconservative (UltraAC), and truss (TrussAC). Their impact on fracture resistance, cleaning/disinfection, procedural errors, root canal detection, treatment time, apical debris extrusion, and root canal filling was discussed. Meta-analysis showed that compared to TradAC, (i) there is a significant higher fracture resistance of teeth with ConsAC, TrussAC, or ConsAC/TrussAC when all marginal ridges are preserved (P  0.05), and (iii) there is a significantly higher risk of undetected canals with ConsAC if not assisted by dental operating microscope and ultrasonic troughing (P 

    Matched MeSH terms: Dental Pulp Cavity
  16. Lin GSS, Singbal KP, Noorani TY, Penukonda R
    Odontology, 2022 Jan;110(1):106-112.
    PMID: 34269933 DOI: 10.1007/s10266-021-00643-y
    To compare the vertical root fracture (VRF) resistance of root canal-treated teeth instrumented with four different nickel-titanium (NiTi) rotary file systems and examine the dentinal crack pattern and direction using a new classification. Eighty mature mandibular premolars were selected and decoronated, leaving 13 mm of the root. The root samples were mounted in acrylic resin and divided randomly into five groups of different NiTi file systems: Group 1-control, Group 2-T-Pro, Group 3-HyFlex CM, Group 4-TG6 and lastly Group 5-ZenFlex. Samples in Group 2 and Group 3 were instrumented up to size 25/0.04, whereas Group 4 and Group 5 were instrumented up to size 25/0.06. Obturation was performed with AH Plus sealer and gutta-percha using single cone technique. Subsequently, all samples were subjected to occlusal compressive force until they were fractured. The force (N) needed to cause root fracture was recorded. The crack patterns and directions were also inspected under magnification and classified using a new and simple classification. The highest (VRF) resistance was noted in the control group (453.15 ± 92.23 N), followed by T-Pro (387.43 ± 76.81 N), HyFlex CM (381.88 ± 52.73 N), ZenFlex (369.15 ± 89.41 N) and finally TG6 (346.05 ± 72.08 N), but there was no significant difference between T-Pro and HyFlex (P = 0.438). A significantly higher prevalence (P = 0.001) of Type 1 crack pattern was observed, especially in samples instrumented with TG6. Majority of the cracks ran buccolingually except in some samples instrumented with ZenFlex (P = 0.898). Smaller file taper increased the VRF resistance of root canal-treated teeth. Majority of the dentinal crack exhibited Type 1 pattern and ran buccolingually.
    Matched MeSH terms: Dental Pulp Cavity
  17. Varadan P, Ganesh A, Konindala R, Nagendrababu V, Ashok R, Deivanayagam K
    Cureus, 2017 Oct 26;9(10):e1805.
    PMID: 29308333 DOI: 10.7759/cureus.1805
    Introduction Root canal irrigants play an important role in reducing intracanal microorganisms, which in turn helps in achieving a successful outcome for the root canal treatment. Objective To compare the antibacterial efficacy of alexidine and chlorhexidine against Enterococcus faecalis. Methods A total of 50 extracted single-rooted teeth were randomly divided into five groups after being infected with Enterococcus faecalis. The groups were based on irrigants used: Group I - 0.4% alexidine; Group II - 1% alexidine; Group III - 1.5% percent alexidine; Group IV - 2% alexidine; Group V - 2% chlorhexidine. Following irrigation, colony-forming units were determined from the dentinal shavings collected at 400 µm depth. Results Use of 2% alexidine reduced the bacteria effectively when compared to 0.4%, 1%, and 1.5% alexidine. A statistically significant difference was not observed between 2% alexidine and 2% chlorhexidine. Discussion Alexidine, due to its higher virulence factors for bacteria and better bacterial penetrability at 400 µm depth of dentin showed better eradication of Enterococcus faecalis in comparison to chlorhexidine. Conclusion The use of 2% alexidine against Enterococcus faecalis at 400 µm depth of dentin has efficacy comparable to chlorhexidine. Hence, alexidine can be used as an alternative irrigant for chlorhexidine during endodontic procedures.
    Matched MeSH terms: Dental Pulp Cavity
  18. Maqbool M, Tirmazi SSM, Shakoor A, Akram Z, Nazir R, Chohan AN, et al.
    Biomed Res Int, 2023;2023:1044541.
    PMID: 36845639 DOI: 10.1155/2023/1044541
    BACKGROUND: Despite of having improved endodontic file designs as well as the reinforced metal alloy file structure, intracanal endodontic file separation (EFS) is still a very problematic and worrisome dental incident, which usually occurs without any visible signs of permanent deformation. Further, there have been conflicting reports regarding the clinical significance of leaving separated files within root canals.

    AIMS: The aim of this study was to look into the current perceptions and awareness about file separation during endodontic treatment among the dental house officers (DHOs).

    MATERIALS AND METHODS: A novel validated questionnaire comprising of 15 close-ended questions was distributed anonymously via Google Forms through email to 1100 DHOs across Pakistan. The questionnaire consisted of two parts: the first component (Section I) collected demographic data and the second component (Section II) investigated the causes of EFS during root canal treatment. Following the completion of socioeconomic information, including age and gender, the DHOs were asked to answer a few questions about the various reasons for endodontic instrument fracture.

    RESULTS: A total of 800 responses were recorded, with an effective rate of 72.8%. The majority of the DHOs (p value < 0.001) perceived that endodontic instrument fracture occurred in the posterior (61.5%) and apical third of the canal (50.5%) and in older permanent dentition (67.3%), possibly due to patient anxiety (62%). Better choice of instrument (61.15%), operators' experience (95.3%), knowledge (87.5%), and proper root canal cleaning (91.1%) are believed to be the vital steps in reducing endodontic file separation/fracture. Furthermore, majority of them (p value < 0.001) perceived that stainless steel was a superior alloy for filing instruments. Manual files tend to be more prone to fractures due to repeated use than rotary files.

    CONCLUSION: This study demonstrated that young DHOs had adequate knowledge and awareness regarding the potential predisposing factors and handling techniques for EFS. This study thereby provides an evaluating tool to access the insights of the current perceptions and awareness of DHOs concerning EFS.

    Matched MeSH terms: Dental Pulp Cavity
  19. Snigdha NTS, Kamarudin A, Baharin F, Ghani NRNA, Bin Yhaya MF, Ahmad WMAW, et al.
    BMC Oral Health, 2023 Jul 08;23(1):462.
    PMID: 37420224 DOI: 10.1186/s12903-023-03129-1
    OBJECTIVE: To compare the sealing ability and marginal adaptation of three calcium silicate-based cement (Biodentine, Pro root MTA, MTA Angelus) using a bacterial leakage model and scanning electron microscope (SEM).

    METHODS: Recently extracted lower first premolars were randomly categorized into three experimental groups (n = 15 samples), positive control (n = 5 samples), and negative control group (n = 5 sample). Samples from the experimental groups and positive control group were subject to cavity Class I occlusal preparation followed by modified coronal pulpotomy. Different types of bioceramic dressing material were placed in 3 mm thickness accordingly, group 1 (Biodentine), group 2 (MTA Angelus), and group 3 (ProRoot MTA). No dressing material was placed in the positive control group (group 4). All samples were placed in the incubator for 24 h at 37℃, 100% humidity, for the materials to be completely set. The final restoration was placed using the Z350 resin composite. A double layer of nail varnish was applied over all the sample surfaces except the occlusal site. Whereas the samples' surfaces in the negative control, were completely covered. A 3 mm length was measured from the root apex of the samples from each group, before proceeding with the resection. The bacterial leakage test was performed using Enterococcus faecalis TCC 23,125, and a sample from each experimental group was randomly chosen for SEM. Data analysis was conducted under the One-way ANOVA test, completed by Tukey's post hoc test.

    RESULTS: There is a significant difference in sealing ability and marginal adaptation between the groups. (p pulp dressing material, was found to have a better marginal adaptation and sealing ability compared to three other bioceramics materials. The material would be the better choice during clinical settings and procedures.

    Matched MeSH terms: Dental Pulp
  20. Zainol Abidin IZ, Manogaran T, Abdul Wahab RM, Karsani SA, Yazid MD, Yazid F, et al.
    Curr Stem Cell Res Ther, 2023;18(3):417-428.
    PMID: 35762553 DOI: 10.2174/1574888X17666220627145424
    BACKGROUND: Proteomic is capable of elucidating complex biological systems through protein expression, function, and interaction under a particular condition.

    OBJECTIVE: This study aimed to determine the potential of ascorbic acid alone in inducing differentially expressed osteoblast-related proteins in dental stem cells via the liquid chromatography-mass spectrometry/ mass spectrometry (LC-MS/MS) approach.

    METHODS: The cells were isolated from deciduous (SHED) and permanent teeth (DPSC) and induced with 10 μg/mL of ascorbic acid. Bone mineralisation and osteoblast gene expression were determined using von Kossa staining and reverse transcriptase-polymerase chain reaction. The label-free protein samples were harvested on days 7 and 21, followed by protein identification and quantification using LC-MS/MS. Based on the similar protein expressed throughout treatment and controls for SHED and DPSC, overall biological processes followed by osteoblast-related protein abundance were determined using the PANTHER database. STRING database was performed to determine differentially expressed proteins as candidates for SHED and DPSC during osteoblast development.

    RESULTS: Both cells indicated brownish mineral stain and expression of osteoblast-related genes on day 21. Overall, a total of 700 proteins were similar among all treatments on days 7 and 21, with 482 proteins appearing in the PANTHER database. Osteoblast-related protein abundance indicated 31 and 14 proteins related to SHED and DPSC, respectively. Further analysis by the STRING database identified only 22 and 11 proteins from the respective group. Differential expressed analysis of similar proteins from these two groups revealed ACTN4 and ACTN1 as proteins involved in both SHED and DPSC. In addition, three (PSMD11/RPN11, PLS3, and CLIC1) and one (SYNCRIP) protein were differentially expressed specifically for SHED and DPSC, respectively.

    CONCLUSION: Proteome differential expression showed that ascorbic acid alone could induce osteoblastrelated proteins in SHED and DPSC and generate specific differentially expressed protein markers.

    Matched MeSH terms: Dental Pulp
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links