This intended paper was done to give an early overview of the expected quality attributes of pineapple-mango juice blend treated with ultraviolet irradiation (UV-C) and thermal pasteurisation. Josapine pineapple (Ananas comosus L.) and Chokanan mango (Mangifera indica L.) is the popular tropical fruits in Malaysia with unique taste and constant availability. The blend of pineapple-mango juice predicted to have good overall quality attributes as proved by prior studies on orange-pineapple, lemon-melon, pineapple-carrot-orange and carrot-apple-banana juice blends. Conventional thermal pasteurisation widely implemented in juice industry but resulted in massive quality degradation. Thus, research on the non-thermal technology of UV-C widely studied to overcome such drawbacks of thermal pasteurisation. Effect of UV-C and thermal pasteurisation on pineapple-mango juice blend will be evaluated in terms of physicochemical (pH, titratable acidity, total soluble solids, turbidity and colour), antioxidant (ascorbic acid, total phenolics content and total antioxidant DPPH assay) and microbiological properties. UV-C treated pineapple-mango juice blend believed to have better retention of heat sensitive ascorbic acid and other quality compared heat pasteurised juice with minimal distinctive characteristic compared to fresh juice.
Air-sea flux exchanges influence the climate condition and the global carbon-moisture cycle. It is imperative to understand the fundamentals of the natural systems at the tropical coastal ocean and how the transformation takes place over the time. Hence, latent and sensible heat fluxes, microclimate variables, and surface water temperature data were collected using eddy covariance instruments mounted on a platform at a tropical coastal ocean station from November 2015 to October 2017. The research data is to gain the needful knowledge of the energy exchanges in the tropical climatic environment to further improve predictive algorithms or models. Therefore, it is intended that this data report will offer appropriate information for the Monsoonal, and diurnal patterns of latent (LE) and sensible (H) heats and hence, establish the relationship between microclimate variables on the energy fluxes at the peninsular Malaysian tropical coastal ocean.
Data on the micrometeorological parameters and Energy Fluxes at an intertidal zone of a Tropical Coastal Ocean was carried out on an installed eddy covariance instruments at a Muka head station in the north-western end of the Pinang Island (5°28'06''N, 100°12'01''E), Peninsula Malaysia. The vast source of the supply of energy and heat to the hydrologic and earth׳s energy cycles principally come from the oceans. The exchange of energies via air-sea interactions is crucial to the understanding of climate variability, energy, and water budget. The turbulent energy fluxes are primary mechanisms through which the ocean releases the heat absorbed from the solar radiations to the environment. The eddy covariance (EC) system is the direct technique of measuring the micrometeorological parameters which allow the measurement of these turbulent fluxes in the time scale of half-hourly basis at 20 Hz over a long period. The data being presented is the comparison of the two-year seasonality patterns of monsoons variability on the measured microclimate variables in the southern South China Sea coastal area.
The major aim of this research was to investigate the addition of BPSC on the physical and rheological properties of asphalt binder. In this study, addition of five different percentages of BPSC compositions were studied, namely (2, 4, 6 and 8%). The impact of modifier on the rheological and physical properties was determined using conventional tests, such as softening point, ductility and penetration, and measurements from a dynamic shear rheometer. Based on the results, it was observed that the addition of BPSC has a significant impact on the rheological properties of asphalt binder and would improve rutting resistance at high temperatures. Meanwhile, results related to physical properties indicated that a decrease in penetration and increase in softening points results in stiffness of BPSC. The results showed that BPSC reduced temperature susceptibility and increased stiffness and elastic behaviour in comparison to unmodified asphalt binder. This means BPSC would increase the resistance of permanent deformation (rutting). Finally, BPSC could be considered as an appropriate additive to modify the properties of asphalt binder.
This article concerns with a mixed convection peristaltic flow of an electrically conducting fluid in an inclined asymmetric channel. Analysis has been carried out in the presence of Joule heating. The fluid viscosity and thermal conductivity are assumed to vary as a linear function of temperature. A nonlinear coupled governing system is computed. Numerical results were presented for the velocity, pressure gradient, temperature and streamlines. Heat transfer rate at the wall is computed and analyzed. Graphs reflecting the contributions of embedded parameters were discussed.
Optimization of thermo-alkaline disintegration of sewage sludge for enhanced biogas yield was carried out using response surface methodology (RSM) and Box-Behnken design of experiment. The individual linear and quadratic effects as well as the interactive effects of temperature, NaOH concentration and time on the degree of disintegration were investigated. The optimum degree of disintegration achieved was 61.45% at 88.50 °C, 2.29 M NaOH (24.23%w/w total solids) and 21 min retention time. Linear and quadratic effects of temperature are most significant in affecting the degree of disintegration. The coefficient of determination (R(2)) of 99.5% confirms that the model used in predicting the degree of disintegration process has a very good fitness with the experimental variables. The disintegrated sludge increased the biogas yield by 36%v/v compared to non-disintegrated sludge. The RSM with Box-Behnken design is an effective tool in predicting the optimum degree of disintegration of sewage sludge for increased biogas yield.
In aquaculture, commercial fish such as red hybrid tilapia are usually raised at high density to boost the production within a short period of time. This overcrowded environment, however, may cause stress to the cultured fish and increase susceptibility to infectious diseases. Antibiotics and chemotherapeutics are used by fish farmers to overcome these challenges, but this may increase the production cost. Studies have reported on the potential of mushroom polysaccharides that can act as immunostimulants to enhance the immune response and disease resistance in fish. In the current study, hot water extract (HWE) from mushroom stalk waste (MSW) was used to formulate fish feed and hence administered to red hybrid tilapia to observe the activation of immune system. Upon 30 days of feeding, the fish were challenged with pathogen-associated molecular patterns (PAMPs) such as lipopolysaccharides (LPS) and polyinosinic:polycytidylic acid (poly (I:C)) to mimic bacterial and viral infection, respectively. HWE supplementation promoted better feed utilisation in red hybrid tilapia although it did not increase the body weight gain and specific growth rate compared to the control diet. The innate immunological parameters such as phagocytic activity and respiratory burst activity were significantly higher in HWE-supplemented group than that of the control group following PAMPs challenges. HWE-supplemented diet also resulted in higher mRNA transcription of il1b and tnfa in midgut, spleen and head kidney at 1-day post PAMPs injection. Tlr3 exhibited the highest upregulation in the HWE fed fish injected with poly (I:C). At 3-days post PAMPs injection, both ighm and tcrb expression were upregulated significantly in the spleen and head kidney. Results showed that HWE supplementation enhances the immune responses of red hybrid tilapia and induced a higher serum bactericidal activity against S. agalactiae.
Climate change is a product of human actions. The extreme events such as flash floods, droughts, heat waves, earthquakes, volcano eruptions and tsunamis seen in the world today are the result of indiscriminate human intrusion into the environment. Vulnerable countries and populations are the most affected by these climatic events. This places a burden on the resources of these countries. The Kyoto Protocol is a milestone in environmental management and the impetus created by it must be maintained by carrying out the much needed research into appropriate mitigating measures that will alleviate the climate
change impact globally. A paradigm shift is needed in addressing the associated risks on human health to assess socioeconomic determinants and the related impacts on disease burden. Some wealthy nations emphasize economic benefits and downplay sustainability goals, health and equality. However the rising cost of energy is beginning to influence their outlook towards this issue. The implications on economics, human health and wellbeing are implicit. In order to strike a balance between disadvantaged and privileged nations, many
international agencies are spearheading various research agenda to improve adaptation programmes on effects of changing climatic conditions on health. Malaysia too has such programmes initiated under its 5-year development plans.
The effect of chemical pretreatments using NaOH, H(2)O(2), and Ca(OH)(2) on Empty Palm Fruit Bunches (EPFB) to degrade EPFB lignin before pyrolysis was investigated. Spectrophotometer analysis proved consecutive addition of NaOH and H(2)O(2) decomposed almost 100% of EPFB lignin compared to 44% for the Ca(OH)(2), H(2)O(2) system while NaOH and Ca(OH)(2) used exclusively could not alter lignin much. Next, the pretreated EPFB was catalytically pyrolyzed. Experimental results indicated the phenolic yields over Al-MCM-41 and HZSM-5 catalysts were 90 wt% and 80 wt%, respectively compared to 67 wt% yield for the untreated sample under the same set of conditions. Meanwhile, the experiments with HY zeolite yielded 70 wt% phenols.
The unsteady two-dimensional laminar g-Jitter mixed convective boundary layer flow of Cu-water and Al2O3-water nanofluids past a permeable stretching sheet in a Darcian porous is studied by using an implicit finite difference numerical method with quasi-linearization technique. It is assumed that the plate is subjected to velocity and thermal slip boundary conditions. We have considered temperature dependent viscosity. The governing boundary layer equations are converted into non-similar equations using suitable transformations, before being solved numerically. The transport equations have been shown to be controlled by a number of parameters including viscosity parameter, Darcy number, nanoparticle volume fraction, Prandtl number, velocity slip, thermal slip, suction/injection and mixed convection parameters. The dimensionless velocity and temperature profiles as well as friction factor and heat transfer rates are presented graphically and discussed. It is found that the velocity reduces with velocity slip parameter for both nanofluids for fluid with both constant and variable properties. It is further found that the skin friction decreases with both Darcy number and momentum slip parameter while it increases with viscosity variation parameter. The surface temperature increases as the dimensionless time increases for both nanofluids. Nusselt numbers increase with mixed convection parameter and Darcy numbers and decreases with the momentum slip. Excellent agreement is found between the numerical results of the present paper with published results.
Rambutan (Nephelium lappaceum) peel is a potential source of antioxidant. As rambutan is a seasonal fruit, a proper heat treatment prior to storage is necessary. Thus, this study was conducted to determine the effect of water and steam blanchings on browning enzymes and antioxidant activities of rambutan peel extracts. Rambutan from the variety of ‘Anak Sekolah’ were peeled and the peel was blanched in boiling water for 0, 2.5, 5 min and by autoclaving for 0, 5, 10 and 15 min. The residual peroxidase (POD) and polyphenoloxidase (PPO) activities, antioxidant activity (2, 2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging activity), total polyphenol content (TPC) and peel extract colour were determined. The results showed that both water and steam blanchings significantly reduced (p < 0.05) POD and PPO activities. The results also indicated that the increase in the blanching period did not significantly reduce the enzyme activities further. In terms of antioxidant activity, the thermal pretreatment caused no significant difference in the contents of phenolic compounds, as well as the antioxidant capacity of the final product.
The study of blood flow in obstructed arteries is a significant focus in computational fluid dynamics, particularly in the field of biomedicine. The primary objective of this research is to investigate the impact of pulsating blood velocity on heat transfer within biological systems, with a specific focus on blood flow in obstructed arteries. To achieve this goal, a comprehensive 3D model representing a straight, constricted blood vessel has been developed. This model incorporates periodic, unsteady, Newtonian blood flow along with the presence of gold and silver nanoparticles. Leveraging the Finite Element Method (FEM), the Navier-Stokes and energy equations have been rigorously solved. Through the investigation, it is aim to shed light on how alterations in the pulsation rate and the volume fraction of nanoparticles influence both temperature distribution and velocity profiles within the system. The present study findings unequivocally highlight that the behavior of pulsatile nanofluid flow significantly impacts the velocity field and heat transfer performance. However, it is imperative to note that the extent of this influence varies depending on the specific volume fractions involved. Specifically, higher volume fractions of nanofluids correlate with elevated velocities at the center of the vessel and decreased velocities near the vessel walls. This pattern also extends to the temperature distribution and heat flux within the vessel, further underscoring the paramount importance of pulsatile flow dynamics in biomedicine and computational fluid dynamics research. Besides, results revealed that the presence of occlusion significantly affects the heat transfer and fluid flow.
The heat and mass transfer of steady magnetohydrodynamics of dusty Jeffrey fluid past an exponentially stretching sheet in the presence of thermal radiation have been investigated. The main purpose of this study is to conduct a detailed analysis of flow behaviour of suspended dust particles in non-Newtonian fluid. The governing equations hav been converted into dimensionless form, and then solved numerically via the Keller-box method. The expression of Sherwood number, Nusselt number and skin friction have been evaluated, and then displayed in tabular forms. Velocity, temperature and concentration profiles are presented graphically. It is observed that large value of dust particles mass concentration parameter has reduced the flow velocity significantly. Increase in radiation parameter enhances the temperature, whereas the increment in Schmidt number parameter reduces the concentration.
The development of advanced composite materials has taken center stage because of its advantages over traditional materials. Recently, carbon-based advanced additives have shown promising results in the development of advanced polymer composites. The inter- and intra-laminar fracture toughness in modes I and II, along with the thermal and electrical conductivities, were investigated. The HMWCNTs/epoxy composite was prepared using a multi-dispersion method, followed by uniform coating at the mid-layers of the CF/E prepregs interface using the spray coating technique. Analysis methods, such as double cantilever beam (DCB) and end notched flexure (ENF) tests, were carried out to study the mode I and II fracture toughness. The surface morphology of the composite was analyzed using field emission scanning electron microscopy (FESEM). The DCB test showed that the fracture toughness of the 0.2 wt.% and 0.4 wt.% HMWCNT composite laminates was improved by 39.15% and 115.05%, respectively, compared with the control sample. Furthermore, the ENF test showed that the mode II interlaminar fracture toughness for the composite laminate increased by 50.88% and 190%, respectively. The FESEM morphology results confirmed the HMWCNTs bridging at the fracture zones of the CF/E composite and the improved interlaminar fracture toughness. The thermogravimetric analysis (TGA) results demonstrated a strong intermolecular bonding between the epoxy and HMWCNTs, resulting in an improved thermal stability. Moreover, the differential scanning calorimetry (DSC) results confirmed that the addition of HMWCNT shifted the Tg to a higher temperature. An electrical conductivity study demonstrated that a higher CNT concentration in the composite laminate resulted in a higher conductivity improvement. This study confirmed that the demonstrated dispersion technique could create composite laminates with a strong interfacial bond interaction between the epoxy and HMWCNT, and thus improve their properties.
In this paper, the problem of free convection boundary layer flow on a horizontal circular cylinder in a nanofluid with viscous dissipation and constant wall temperature is investigated. The transformed boundary layer equations are solved numerically using finite difference scheme namely the Keller-box method. Numerical solutions were obtained for the reduced skin friction coefficient, Nusselt number and Sherwood number as well as the velocity and temperature profiles.The features of the flow and heat transfer characteristics for various values of the Brownian motion parameter, thermophoresis parameter, Lewis number and Eckert number were analyzed and discussed.
This paper presents a numerical analysis of a stagnation-point flow towards a nonlinearly stretching/shrinking sheet immersed in a viscous fluid. The stretching/shrinking velocity and the external flow velocity impinges normal to the stretching/shrinking sheet are assumed to be in the form U ~ xm, where m is a constant and x is the distance from the stagnation point. The governing partial differential equations are converted into ordinary ones by a similarity transformation, before being solved numerically. The variations of the skin friction coefficient and the heat transfer rate at the surface with the governing parameters are graphed and tabulated. Different from a stretching sheet, it is found that the solutions for a shrinking sheet are non-unique for m > 1/3.
The effect of radiation on magnetohydrodynamic (MHD) boundary layer flow of a viscous fluid over an exponentially stretching sheet was studied. The governing system of partial differential equations was transformed into ordinary differential equations before being solved numerically by an implicit finite-difference method. The effects of the governing parameters on the flow field and heat transfer characteristics were obtained and discussed. It was found that the local heat transfer rate at the surface decreases with increasing values of the magnetic and radiation parameters.
In this study, the numerical solution of stagnation point flow over a stretching surface, generated by Newtonian heating in which the heat transfer from the surface is proportional to the local surface temperature is considered. The transformed boundary layer equations are solved numerically using the shooting method. Numerical solutions are obtained for the local heat transfer coefficient, the surface temperature and the temperature profiles. The features of the flow and heat transfer characteristics for various values of the Prandtl number, stretching parameter and conjugate parameter are analyzed and discussed.
Coral reef research has predominantly focused on the effect of temperature on the breakdown of coral-dinoflagellate symbioses. However, less is known about how increasing temperature affects the establishment of new coral-dinoflagellate associations. Inter-partner specificity and environment-dependent colonization are two constraints proposed to limit the acquisition of more heat tolerant symbionts. Here, we investigated the symbiotic dynamics of various photosymbionts in different host genotypes under "optimal" and elevated temperature conditions. To do this, we inoculated symbiont-free polyps of the sea anemone Exaiptasia pallida originating from Hawaii (H2), North Carolina (CC7), and the Red Sea (RS) with the same mixture of native symbiont strains (Breviolum minutum, Symbiodinium linucheae, S. microadriaticum, and a Breviolum type from the Red Sea) at 25 and 32 °C, and assessed their ITS2 composition, colonization rates, and PSII photochemical efficiency (Fv/Fm). Symbiont communities across thermal conditions differed significantly for all hosts, suggesting that temperature rather than partner specificity had a stronger effect on symbiosis establishment. Overall, we detected higher abundances of more heat resistant Symbiodiniaceae types in the 32 °C treatments. Our data further showed that PSII photophysiology under elevated temperature improved with thermal pre-exposure (i.e., higher Fv/Fm), yet, this effect depended on host genotype and was influenced by active feeding as photochemical efficiency dropped in response to food deprivation. These findings highlight the role of temperature and partner fidelity in the establishment and performance of symbiosis and demonstrate the importance of heterotrophy for symbiotic cnidarians to endure and recover from stress.
Pharmacological and biochemical studies on the Ammi majus seeds L. (family Umbelliferae) grown in Egypt are limited. Furocoumarins are the major constituents in the plant seeds. In the present study, the evaluation of the antihyperlipidemic, anti-inflammatory, analgesic, and antipyretic activities on albino rats and mice was done. After 2 months of administration, both the doses (50 and 100 mg/kg body weight [bwt], respectively) of the alcoholic extract of the A. majus seed result in a significant decrease in the concentrations of cholesterol, triglycerides, and low-density lipoprotein and increase in the concentration of high-density lipoprotein. The extract was found to inhibit the rat paw edema at both the doses, which means that it exerts a significant anti-inflammatory activity compared with control-untreated groups at the intervals of 30 and 60 minutes posttreatment. The antipyretic effect of the extract was quite obvious; it showed that 100 mg/kg bwt was more potent in lowering body temperature starting after 1 hour of treatment than the lower dose (50 mg/kg bwt). It is worth to mention that the A. majus extract with its coumarin contents as well as the tested biological activities of the plant was investigated for the first time in the current study. In conclusion, ethanolic extract of the A. majus seeds had antihyperlipidemic, anti-inflammatory, analgesic, and antipyretic activities that are dose dependant.