Displaying publications 61 - 80 of 340 in total

Abstract:
Sort:
  1. Digital radiographic image enhancement for weld defect detection using smoothing and morphological transformations
    Suhaila Abdul Halim, Arsmah Ibrahim, Yupiter Harangan Prasada Manurung
    Scientific Research Journal, 2012;9(1):15-27.
    MyJurnal
    Accurate inspection of welded materials is important in relation to achieve acceptable standards. Radiography, a non-destructive test method, is commonly used to evaluate the internal condition of a material with respect to defect detection. The presence of noise in low resolution of radiographic images significantly complicates analysis; therefore attaining higher quality radiographic images makes defect detection more readily achievable. This paper presents a study pertaining to the quality enhancement of radiographic images with respect to different types of defects. A series of digital radiographic weld flaw images were smoothed using multiple smoothing techniques to remove inherent noise followed by top and bottom hat morphological transformations. Image quality was evaluated quantitatively with respect to SNR, PSNR and MAE. The results indicate that smoothing enhances the quality of radiographic images, thereby promoting defect detection with the respect to original radiographic images.
    Matched MeSH terms: Reference Standards
  2. Effects of season on the yield and quality of extracts from Gracilaria changii (Gracilariaceae, Rhodophyta)
    Sasidharan S, Darah I, Jain K
    Sains Malaysiana, 2009;38.
    The effect of season on yield and quality of organic solvent extracts from Gracilaria changii was determined. The sustainability of the bioactive compound of G. changii from Malaysia was investigated by using the TLC and FTIR standards methods. Studies was carried out to examine the sustainability of the bioactive compound in the various extract obtained from G. changii collected from Pantai Morib, Beach Selangor Malaysia on bimonthly for a period of one year in 2003. This study revealed that the bioactive compounds was present all over the year but with different quantities. In general the variation in yield or quantities of bioactive compound was related to environment. G. changii can be considered a candidate for drug development since it retained the number of bioactive compound.
    Matched MeSH terms: Reference Standards
  3. Fulltext Salting-out assisted liquid-liquid extraction coupled with high-performance liquid chromatography for the determination of vitamin D3 in milk samples
    Sazali NH, Alshishani A, Saad B, Chew KY, Chong MM, Miskam M
    R Soc Open Sci, 2019 Aug;6(8):190952.
    PMID: 31598260 DOI: 10.1098/rsos.190952
    In this study, salting-out assisted liquid-liquid extraction (SALLE) as a simple and efficient extraction technique followed by high-performance liquid chromatography (HPLC) was employed for the determination of vitamin D3 in milk samples. The sample treatment is based on the use of water-miscible acetonitrile as the extractant and acetonitrile phase separation under high-salt conditions. Under the optimum conditions, acetonitrile and ammonium sulfate were used as the extraction solvent and salting-out agent, respectively. The vitamin D3 extract was separated using Hypersil ODS (250x i.d 4.6 mm, 5 µm) HPLC column that was coupled with diode array detector. Vitamin D2 was used as internal standard (IS) to offset any variations in chromatographic conditions. The vitamin D3 and the IS were eluted in 18 min. Good linearity (r2 > 0.99) was obtained within the range of 25-600 ng g-1 with the limit of detection of 15 ng g-1 and limit of quantification of 25 ng g-1. The validated method was applied for the determination of vitamin D3 in milk samples. The recoveries for spiked samples were from 94.4 to 113.5%.
    Matched MeSH terms: Reference Standards
  4. Fulltext Empyema thoracis presented as giant back abscess
    Abd Karim SH, Wan Zain WZ, Mohd Hashim MN, Zakaria AD, Hayati F, Ng CY
    Radiol Case Rep, 2021 May;16(5):1061-1064.
    PMID: 33680277 DOI: 10.1016/j.radcr.2021.02.030
    Empyema thoracis (ET) is defined as pus in the pleural space, either localized or involving the entire pleural cavity, due to diverse etiologies. In severe form, it may infiltrate the extrapulmonary region. Clinical guideline describes 3 stages of parapneumonic effusion before developing into an ET, namely the exudative stage, the fibrinopurulent stage, and the organizing/late stage. We highlight a 59-year-old gentleman who presented a back swelling masquerading as a deep-seated abscess, in which the diagnosis of ET had not been established early. The principles of treatment are treating the underlying condition such as pneumonia, pleural drainage and debridement, full re-expansion of the collapsed lung by performing chest physiotherapy, and improving nutrition. ET is a condition with a dynamic process due to diverse etiologies, either localized or involving the entire pleural cavity. The gold standard in diagnosing ET is the pleural aspiration of fluid from the pleural space, whereas the management of ET may include non-surgical and/or surgical treatments based on the basic principles of ET treatment.
    Matched MeSH terms: Reference Standards
  5. Malaysian participation in the IAEA/WHO postal TLD and postal ionisation chamber intercomparison programmes: analysis of results obtained during 1985-2008
    Samat SB, Evans CJ, Kadni T, Dolah MT
    Radiat Prot Dosimetry, 2009 Feb;133(3):186-91.
    PMID: 19299478 DOI: 10.1093/rpd/ncp035
    During the years 1985-2008, the Secondary Standards Dosimetry Laboratory of Malaysia (SSDL Malaysia) has participated 37 times in the IAEA/WHO intercomparison programmes. This paper reports an analysis of the intercomparison data and demonstrates that the quality of the SSDL calibration service is well within the limits required by IAEA.
    Matched MeSH terms: Reference Standards
  6. Fulltext Medication stockpiling: A red alert to combat for quality, safety, and efficacy of medication
    Lee, Soik Fun, Chew, Wei Yee, Malar, Louise Santana, Nor Azrizan Hashim
    Q Bulletin, 2019;1(28):4-16.
    MyJurnal
    Medication Stockpiling (MS), in the Ministry of Health, Malaysia, resulted in the disposal of MYR 2 million worth of expired or spoilt medicines between 2014 and 2016. MS is an alarming issue that causes healthcare resources wastage and potentially harmful and toxic to patients. This study aimed to reduce MS in Hospital Selama, beginning with the medical wards within one year.
    A situational analysis from the year 2013 to 2014 showed a 9.4% increase in MS. A four-month pre-intervention study from November 2014 to February 2015 revealed a 28% MS. The standard of the study was set based on the team members’ consensus. The aim was to reduce 50% of MS after four-month of intervention. The cause-effect analysis identified the main contributing factors of MS. The questionnaire was distributed to nurses in the wards and pharmacists to pinpoint the MS antecedent. The results indicated a lack of routine ward audit by the clinical pharmacists, over-indent by ward nurses and oversupply by the pharmacy unit. A flow-chart of the good care process comprises the steps of medications indent and supply was developed. It involved assigning the nightshift nurses for checking and indenting the wards’ medication stock, developing the ward stock indent (WSI) form, ensuring the pharmacy staff supply sufficient medication and enforcing a monthly ward audit by the clinical pharmacists and cross-audit by other pharmacists. Each indicator in the model of good care was then measured.
    The post-intervention period successfully achieved a 3.5% MS; an 87.5% reduction (exceeded the target). Additionally, a cost reduction in the medication wastage from MYR 1,273.97 to MYR 654.44 was noted. The study successfully achieved less than 6% of MS from 2015 to 2018.
    In conclusion, the study facilitated a successful collaboration among the hospital different units towards MS reduction.
    Matched MeSH terms: Reference Standards
  7. Fulltext Improving the percentage of platelet concentrates that meet platelet count standard
    Norsuzilawati Abdullah, Noor Hamizah Mohd Hassan, Mohd Muhaimin Kambali
    Q Bulletin, 2019;1(28):18-25.
    MyJurnal
    The platelet concentrates (PCs) is used for the treatment and prevention of bleeding in patients with reduced platelet number or function. The prepared platelet concentrates (PCs) must meet the specified quality control (QC) test standards. PCs that do not meet QC standards will reduce the efficacy of patient care and increase the need of repeated PC transfusion. According to the standards, at least 75% PCs tested should contain more than 60 x 109 per platelet count units. Hence, the objective of this study was to increase the percentage of PCs that meet the platelet count standard to more or equal to 75%.
    A cross sectional study was conducted from May 2015 to March 2016. Data were collected and analysed through monthly PCs QC test results. A retrospective QC data review in March and April 2015 showed only 30% PCs achieved the platelet count standard for QC tests. Intervention package was implemented to tackle the identified risk factors that lead to platelet count problems that do not meet the standards.
    The post remedial results showed an increase to 90% of PCs that meet platelet count standards in January to February 2016. The study also found that the rate of platelet count increment in patients after PCs transfusion increased from 5 x 109 per ml to 9 x 109 per ml after the study. Additionally, the repeated PC transfusion rate decreased from 22% to 18%. Achievements were successfully maintained after the study which was 89% in March to April 2017. Continuous monitoring need to be carried out to ensure the achievement remains in compliance with the established standards. This quality improvement method has facilitated successful platelet transfusion to patient by improving the quality and performance of PCs. The improvement strategies of this study have the potential to be implemented at other blood collection centers in order to improve the quality of healthcare services.
    Matched MeSH terms: Reference Standards
  8. Fulltext Increasing the percentage of appropriate tests conducted in the serology laboratory, Hospital Sultanah Nur Zahirah
    Azlina Yahya, Osama Abdul Nasir
    Q Bulletin, 2019;1(28):36-44.
    MyJurnal
    Wastage due to unnecessary laboratory test requests is a major problem in government hospitals because they have cost implications. Although screening of infectious marker tests such as Human Immunodeficiency Virus (HIV), Hepatitis B surface Antigen (HBsAg), Hepatitis B antibody (AHBS) and Hepatitis C Virus (HCV)) before testing have been put in place, inappropriate tests were still being carried out in the Serology laboratory, which resulted in wasted human resources and reagents, increased workload and increased maintenance costs. Based on the verification studies using the Laboratory Information System (LIS), we observed only 70% of the tests followed the ordering guidelines or test specifications. Thus, we aim to increase the standard to more than 95% of the infectious marker test requests which were appropriate according to a few guidelines.
    A cross-sectional study was conducted for all infectious marker tests received at Serology Laboratory from January 2015 to June 2016 to verify the problem. A workplace audit and questionnaire survey on the staff were carried out to gain more information. Low level of knowledge, unavailability of standardised guidelines for quick and easy reference, lack of staff and inefficient work processes were among the main contributing factors. Empowering new staff to screen specimens, developing simple and informative screening guidelines, providing adequate trays and refrigerators for screening purposes and strengthening and developing a more effective process of care were the strategies taken during this study.
    The appropriate tests carried out from July to September 2015, October to December 2015, January to March 2016 and April to June 2016 were 99%, 98.80%, 99.50%, 98.90% respectively. During the same period, 711, 411, 710 and 768 tests were rejected. We monitored the performance and managed to achieve 100% appropriate testing for the period of July 2016 to June 2018 and an estimation of MYR 73,437.50 cost saving was achieve
    Matched MeSH terms: Reference Standards
  9. Fulltext Reducing the failure rate of ocular prosthesis at Hospital Sultanah Aminah
    Muhamad Imran Abdulah, Ikmal Abdul Hakim, Rosni Amin, Rosliza Parumo, Ma, Bee Chai, Noraziyah Abdul Aziz, et al.
    Q Bulletin, 2020;1(29):16-27.
    MyJurnal
    The Department of Oral & Maxillofacial Surgery at Hospital Sultanah Aminah, Johor Bahru started managing patients who lost their eyeballs with ocular prosthesis in 2013. Unfortunately, there was an increasing trend of failed ocular prosthesis from 2013-2015. The failure rate went from 28.6% in 2013 to 40% in 2014 and increased to 44.4% in 2015. Failed ocular prosthesis not only leads to dissatisfied patients but also an increase in cost due to redoing of prosthesis. The objective of this project was to reduce the incidence rate of failed ocular prosthesis. A failed case is when the prosthesis does not pass the issue stage and has to be redone from the beginning. The standard failure rate is 0%, as the average number of cases per year is only about 10 cases. We determined the contributing factors of failed ocular prosthesis by analysing retrospective data from patients’ dental and lab records. This was followed by a self-administered questionnaire on reasons for failed cases which was distributed among the dentists and lab technicians in our department. The contributing factors that were identified included insufficient knowledge or skill of dentist and lab technicians in the construction of the ocular prosthesis, as well as improper screening of new cases which was the main factor of all the failed cases. The strategies for change included improving the process of care by creating a checklist for proper screening of new patients, mentoring of new staff, and continuous training on construction of ocular prosthesis, Fabricated Iris Mould innovation technique and early referral for insertion of eye conformer. The interventions that were implemented reduced the failure rate to 20% in 2016 followed by 0% in 2017, 2018 and 2019. Ongoing efforts are being done to replicate this project in other Oral & Maxillofacial Surgery clinics in Johor.
    Matched MeSH terms: Reference Standards
  10. Fulltext Improving the appropriateness of therapeutic drug monitoring sampling in Hospital Sultanah Nur Zahirah, Kuala Terengganu
    Lukman Nul Hakim Md Khairi, Farah Syakirah Ahmad, Aimi Shazana Muhammad Anuar, Nurul Ain Wan Omar, Nurul Najmi Muhammad, Nurulhayati Abd. Jamal, et al.
    Q Bulletin, 2020;1(29):28-35.
    MyJurnal
    Therapeutic drug monitoring (TDM) is a valuable clinical tool in optimisation of drug regimens. However, improper utilisation of TDM may lead to significant resource wastage and expose patients to avoidable trauma, toxicity, therapeutic failure and prolonged hospitalisation. This study aimed to reduce the percentage of inappropriate TDM sampling to our proposed standard of less than 20% within a four-month intervention period. A cross-sectional study was undertaken from January to December 2015 at the inpatient setting of Hospital Sultanah Nur Zahirah. Gentamicin and Vancomycin analytes were studied because these analytes accounted for 69.2% of total samples received in 2014. TDM Monitoring Form was used to collect sampling and dosage information to assess sampling appropriateness. A closed-ended self-administered questionnaire was distributed to a group of medical doctors to assess their knowledge on appropriate Gentamicin and Vancomycin TDM sampling method pre- and post-intervention. Prior to the intervention phase in October to December 2014, 79.4% of TDM were inappropriately sampled. The main contributing factors were inadequate knowledge among medical doctors, lack of sampling reminders for new TDM requests, and misunderstanding on sampling information for repeated TDM requests. 60-minute face-to-face educational sessions on TDM sampling method were conducted specifically for staff at the General Medical and Paediatric Departments, and two continuing medical education (CME) slots were held at the hospital level. Guidelines on TDM sampling was initiated and laminated copies were distributed to all wards. Implementation of TDM Alert System which consisted of digital reminders and physical stickers was also introduced. The interventions were able to reduce the inappropriate sampling percentage from 79.4% to 41.8% post-intervention, and to 19.1% in the recent monitoring phase of January until June 2019. Continuous close monitoring and sustainable implementation of the measures are vital as TDM sampling appropriateness may affect clinical interpretation of the results.
    Matched MeSH terms: Reference Standards
  11. Fulltext Increasing the percentage of bedside dispensing in Adult Medical Wards of Hospital Sultanah Nur Zahirah, Kuala Terengganu
    Lukman Nul Hakim Md Khairi, Farah Syakirah Ahmad, Nur Liyana Mohd Fozi, Aimi Shazana Muhammad Anuar, Wan Najiah W. Mokhtar @ W. Moxtor, Maznuraini Zainuddin
    Q Bulletin, 2020;1(29):36-44.
    MyJurnal
    Bedside dispensing (BD) is one of the clinical services offered by the Pharmacy Department to patients prior to their hospital discharge. Increment in number of BD may improve the patients’ discharge process, patients’ satisfaction and their medication knowledge. This project aimed at increasing the percentage of BD in adult medical wards of Hospital Sultanah Nur Zahirah (HSNZ). The proposed standard of BD percentage was at least 30% within four months of intervention. The project was conducted from November 2016 to December 2019. The monthly report of pharmacy BD record was analysed to assess the achievement of BD. A pre-interventional retrospective BD data review of discharge prescriptions received throughout 2016 showed that only 8.1% of discharge prescriptions were dispensed at the bedside. A closed-ended questionnaire to evaluate knowledge, experience and perceived contributing factors to the low percentage of BD was distributed to nurses, inpatient pharmacists and ward pharmacists. The main contributing factors identified included time constraint, poor understanding of BD workflow, inadequate staff awareness and lack of cooperation among healthcare providers. Institutional BD workflow was implemented involving the introduction of discharge prescriptions pick-up points at medical wards, and a scheduled timing for prescriptions collection and dispensing during office hours. Three face-to-face educational sessions on overview of BD and its latest workflow were given to staff nurses, inpatient pharmacists at discharge pharmacy unit and ward pharmacists. In 2017, the percentage of BD increased from 8.1% to 28.0% after the implementation of interventions, and subsequently to 60.0% in the latest maintenance phase of January until December 2019. The sustainable implementation of this BD program could be shared and implemented at other facilities with inpatient discharge services to improve healthcare delivery.
    Matched MeSH terms: Reference Standards
  12. Fulltext Optical pH Sensor Based on Immobilization Anthocyanin from Dioscorea alata L. onto Polyelectrolyte Complex Pectin-Chitosan Membrane for a Determination Method of Salivary pH
    Safitri E, Humaira H, Murniana M, Nazaruddin N, Iqhrammullah M, Md Sani ND, et al.
    Polymers (Basel), 2021 Apr 14;13(8).
    PMID: 33919956 DOI: 10.3390/polym13081276
    A simple optical pH sensor based on immobilization, Dioscorea alata L. anthocyanin methanol extract, onto a pectin-chitosan polyelectrolyte complex (pectin-chitosan PEC), has been successfully fabricated. The optical pH sensor was manufactured as a membrane made of pectin-chitosan PEC and the extracted anthocyanin. This sensor has the highest sensitivity of anthocyanin content at 0.025 mg/L in phosphate buffer and 0.0375 mg/L in citrate buffer. It also has good reproducibility with a relative standard deviation (%RSD) of 7.7%, and gives a stable response at time values greater than 5 min from exposure in a buffer solution, and the sensor can be utilized within five days from its synthesis. This optical pH sensor has been employed to determine saliva pH of people of different ages and showed no significant difference when compared to a potentiometric method.
    Matched MeSH terms: Reference Standards
  13. Fulltext Melt- vs. Non-Melt Blending of Complexly Processable Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposite
    Sharip NS, Ariffin H, Yasim-Anuar TAT, Andou Y, Shirosaki Y, Jawaid M, et al.
    Polymers (Basel), 2021 Jan 27;13(3).
    PMID: 33513876 DOI: 10.3390/polym13030404
    The major hurdle in melt-processing of ultra-high molecular weight polyethylene (UHMWPE) nanocomposite lies on the high melt viscosity of the UHMWPE, which may contribute to poor dispersion and distribution of the nanofiller. In this study, UHMWPE/cellulose nanofiber (UHMWPE/CNF) bionanocomposites were prepared by two different blending methods: (i) melt blending at 150 °C in a triple screw kneading extruder, and (ii) non-melt blending by ethanol mixing at room temperature. Results showed that melt-processing of UHMWPE without CNF (MB-UHMWPE/0) exhibited an increment in yield strength and Young's modulus by 15% and 25%, respectively, compared to the Neat-UHMWPE. Tensile strength was however reduced by almost half. Ethanol mixed sample without CNF (EM-UHMWPE/0) on the other hand showed slight decrement in all mechanical properties tested. At 0.5% CNF inclusion, the mechanical properties of melt-blended bionanocomposites (MB-UHMWPE/0.5) were improved as compared to Neat-UHMWPE. It was also found that the yield strength, elongation at break, Young's modulus, toughness and crystallinity of MB-UHMWPE/0.5 were higher by 28%, 61%, 47%, 45% and 11%, respectively, as compared to the ethanol mixing sample (EM-UHMWPE/0.5). Despite the reduction in tensile strength of MB-UHMWPE/0.5, the value i.e., 28.4 ± 1.0 MPa surpassed the minimum requirement of standard specification for fabricated UHMWPE in surgical implant application. Overall, melt-blending processing is more suitable for the preparation of UHMWPE/CNF bionanocomposites as exhibited by their characteristics presented herein. A better mechanical interlocking between UHMWPE and CNF at high temperature mixing with kneading was evident through FE-SEM observation, explains the higher mechanical properties of MB-UHMWPE/0.5 as compared to EM-UHMWPE/0.5.
    Matched MeSH terms: Reference Standards
  14. Fulltext Selection of suitable endogenous reference genes for qPCR in kidney and hypothalamus of rats under testosterone influence
    Gholami K, Loh SY, Salleh N, Lam SK, Hoe SZ
    PLoS One, 2017;12(6):e0176368.
    PMID: 28591185 DOI: 10.1371/journal.pone.0176368
    Real-time quantitative PCR (qPCR) is the most reliable and accurate technique for analyses of gene expression. Endogenous reference genes are being used to normalize qPCR data even though their expression may vary under different conditions and in different tissues. Nonetheless, verification of expression of reference genes in selected studied tissue is essential in order to accurately assess the level of expression of target genes of interest. Therefore, in this study, we attempted to examine six commonly used reference genes in order to identify the gene being expressed most constantly under the influence of testosterone in the kidneys and hypothalamus. The reference genes include glyceraldehyde-3-phosphate dehydrogenase (GAPDH), actin beta (ACTB), beta-2 microglobulin (B2m), hypoxanthine phosphoribosyltransferase 1 (HPRT), peptidylprolylisomerase A (Ppia) and hydroxymethylbilane synthase (Hmbs). The cycle threshold (Ct) value for each gene was determined and data obtained were analyzed using the software programs NormFinder, geNorm, BestKeeper, and rank aggregation. Results showed that Hmbs and Ppia genes were the most stably expressed in the hypothalamus. Meanwhile, in kidneys, Hmbs and GAPDH appeared to be the most constant genes. In conclusion, variations in expression levels of reference genes occur in kidneys and hypothalamus under similar conditions; thus, it is important to verify reference gene levels in these tissues prior to commencing any studies.
    Matched MeSH terms: Reference Standards
  15. Fulltext Transcriptome Analysis and Differential Gene Expression on the Testis of Orange Mud Crab, Scylla olivacea, during Sexual Maturation
    Waiho K, Fazhan H, Shahreza MS, Moh JH, Noorbaiduri S, Wong LL, et al.
    PLoS One, 2017;12(1):e0171095.
    PMID: 28135340 DOI: 10.1371/journal.pone.0171095
    Adequate genetic information is essential for sustainable crustacean fisheries and aquaculture management. The commercially important orange mud crab, Scylla olivacea, is prevalent in Southeast Asia region and is highly sought after. Although it is a suitable aquaculture candidate, full domestication of this species is hampered by the lack of knowledge about the sexual maturation process and the molecular mechanisms behind it, especially in males. To date, data on its whole genome is yet to be reported for S. olivacea. The available transcriptome data published previously on this species focus primarily on females and the role of central nervous system in reproductive development. De novo transcriptome sequencing for the testes of S. olivacea from immature, maturing and mature stages were performed. A total of approximately 144 million high-quality reads were generated and de novo assembled into 160,569 transcripts with a total length of 142.2 Mb. Approximately 15-23% of the total assembled transcripts were annotated when compared to public protein sequence databases (i.e. UniProt database, Interpro database, Pfam database and Drosophila melanogaster protein database), and GO-categorised with GO Ontology terms. A total of 156,181 high-quality Single-Nucleotide Polymorphisms (SNPs) were mined from the transcriptome data of present study. Transcriptome comparison among the testes of different maturation stages revealed one gene (beta crystallin like gene) with the most significant differential expression-up-regulated in immature stage and down-regulated in maturing and mature stages. This was further validated by qRT-PCR. In conclusion, a comprehensive transcriptome of the testis of orange mud crabs from different maturation stages were obtained. This report provides an invaluable resource for enhancing our understanding of this species' genome structure and biology, as expressed and controlled by their gonads.
    Matched MeSH terms: Reference Standards
  16. Fulltext Assessment of Aedes albopictus reference genes for quantitative PCR at different stages of development
    Dzaki N, Azzam G
    PLoS One, 2018;13(3):e0194664.
    PMID: 29554153 DOI: 10.1371/journal.pone.0194664
    Members of the Aedes genus of mosquitoes are widely recognized as vectors of viral diseases. Ae.albopictus is its most invasive species, and are known to carry viruses such as Dengue, Chikugunya and Zika. Its emerging importance puts Ae.albopictus on the forefront of genetic interaction and evolution studies. However, a panel of suitable reference genes specific for this insect is as of now undescribed. Nine reference genes, namely ACT, eEF1-γ, eIF2α, PP2A, RPL32, RPS17, PGK1, ILK and STK were evaluated. Expression patterns of the candidate reference genes were observed in a total of seventeen sample types, separated by stage of development and age. Gene stability was inferred from obtained quantification data through three widely cited evaluation algorithms i.e. BestKeeper, geNorm, and NormFinder. No single gene showed a satisfactory degree of stability throughout all developmental stages. Therefore, we propose combinations of PGK and ILK for early embryos; RPL32 and RPS17 for late embryos, all four larval instars, and pupae samples; eEF1-γ with STK for adult males; eEF1-γ with RPS17 for non-blood fed females; and eEF1-γ with eIF2α for both blood-fed females and cell culture. The results from this study should be able to provide a more informed selection of normalizing genes during qPCR in Ae.albopictus.
    Matched MeSH terms: Reference Standards
  17. Fulltext Phytochemical and In Vitro Genotoxicity Studies of Standardized Ficus deltoidea var. kunstleri Aqueous Extract
    Muhammad H, Omar MH, Rasid ENI, Suhaimi SN, Mohkiar FH, Siu LM, et al.
    Plants (Basel), 2021 Feb 11;10(2).
    PMID: 33670296 DOI: 10.3390/plants10020343
    The present study was carried out to assess the genotoxicity potential of Ficus deltoidea var. kunstleri aqueous extract (FDAE) using standard in vitro assays. The DNA damage of V79B cells was measured using the alkaline comet assay treated at 0.1 mg/mL (IC10) and 0.3 mg/mL (IC25) of FDAE together with positive and negative controls. For in vitro micronucleus assay, the V79B cells were treated with FDAE at five different concentrations (5, 2.5, 1.25, 0.625, and 0.3125 mg/mL) with and without S9 mixture. The bacteria reverse mutation assay of FDAE was performed on Salmonella typhimurium strains TA98, 100, 1535, 1537, and Escherichia coli strain WP2uvrA using pre-incubation method in the presence or in the absence of an extrinsic metabolic system (S9 mixture). FDAE at 0.1 and 0.3 mg/mL significantly increased DNA damage in both comet tail and tail moment (p < 0.05). No significant changes were detected in the number of micronucleated cell when compared to control. Tested at the doses up to 5000 µg/plate, the FDAE did not increase the number of revertant colonies for all strains. In conclusion, further investigation needs to be conducted in animal model to confirm the non-genotoxicity activities of FDAE.
    Matched MeSH terms: Reference Standards
  18. High performance liquid chromatography in phytochemical analysis of Eurycoma longifolia
    Chan KL, Choo CY, Morita H, Itokawa H
    Planta Med, 1998 Dec;64(8):741-5.
    PMID: 17253320 DOI: 10.1055/s-2006-957570
    An analytical method using HPLC with UV detection was developed to investigate the quassinoid content of Eurycoma longifolia Jack (Simaroubaceae) collected from various sources. Eurycomanone (1), longilactone (2), 14,15beta-dihydroxyklaineanone (3), 15beta-acetyl-14-hydroxyklaineanone (4), 6alpha-hydroxyeurycomalactone (5), and eurycomalactone (7) were isolated as reference standards and together with the synthesized 1beta,12alpha,15beta-triacetyleurycomanone (6, internal standard), were identified by NMR, MS, UV and IR spectroscopies. Their coefficient of variation values for 0.50-35 microg ml(-1) concentrations of quassinoids and their retention times measured within- and between-day were small. The recoveries of the spiked quassinoids in E. longifolia samples and their detection limits at 8.5 times signal to noise ratio were 99.75-109.13% and 0.01 microg ml(-1), respectively. From the root samples analysed, 1 had the highest concentration, being about 16.8-39.6 fold higher than the other quassinoids 2, 3, 5, 7 but 145.3 fold higher than 4 which showed the lowest concentration.
    Matched MeSH terms: Reference Standards
  19. Solid-phase microextraction for determining twelve orange flavour compounds in a model beverage emulsion
    Mirhosseini H, Tan CP, Yusof S, Hamid NS
    Phytochem Anal, 2008 Sep-Oct;19(5):429-37.
    PMID: 18435528 DOI: 10.1002/pca.1068
    Solid-phase microextraction (SPME) coupled to gas chromatography has been applied for the headspace analysis (HS) of 12 target flavour compounds in a model orange beverage emulsion. The main volatile flavour compounds studied were: acetaldehyde, ethyl acetate, alpha-pinene, ethyl butyrate, beta-pinene, myrcene, limonene, gamma-terpinene, octanal, decanal, linalool and citral (neral plus geranial). After screening the fibre type, the effect of other HS-SPME variables such as adsorption temperature (25-55 degrees C), extraction time (10-40 min), sample concentration (1-100% w/w), sample amount (5-10 g) and salt amount (0-30% w/w) were determined using a two-level fractional factorial design (2(5-2)) that was expanded further to a central composite design. It was found that an extraction process using a carboxen-polydimethylsiloxane fibre coating at 15 masculineC for 50 min with 5 g of diluted emulsion 1% (w/w) and 30% (w/w) of sodium chloride under stirring mode resulted in the highest HS extraction efficiency. For all volatile flavour compounds, the linearity values were accurate in the concentration ranges studied (r(2) > 0.97). Average recoveries that ranged from 90.3 to 124.8% showed a good accuracy for the optimised method. The relative standard deviation for six replicates of all volatile flavour compounds was found to be less than 15%. For all volatile flavour compounds, the limit of detection ranged from 0.20 to 1.69 mg/L.
    Matched MeSH terms: Reference Standards
  20. 1 H-NMR metabolomics for evaluating the protective effect of Clinacanthus nutans (Burm. f) Lindau water extract against nitric oxide production in LPS-IFN-γ activated RAW 264.7 macrophages
    Khoo LW, Kow ASF, Maulidiani M, Ang MY, Chew WY, Lee MT, et al.
    Phytochem Anal, 2019 Jan;30(1):46-61.
    PMID: 30183131 DOI: 10.1002/pca.2789
    INTRODUCTION: Clinacanthus nutans, a small shrub that is native to Southeast Asia, is commonly used in traditional herbal medicine and as a food source. Its anti-inflammation properties is influenced by the metabolites composition, which can be determined by different binary extraction solvent ratio and extraction methods used during plant post-harvesting stage.

    OBJECTIVE: Evaluate the relationship between the chemical composition of C. nutans and its anti-inflammatory properties using nuclear magnetic resonance (NMR) metabolomics approach.

    METHODOLOGY: The anti-inflammatory effect of C. nutans air-dried leaves extracted using five different binary extraction solvent ratio and two extraction methods was determined based on their nitric oxide (NO) inhibition effect in lipopolysaccharide-interferon-gamma (LPS-IFN-γ) activated RAW 264.7 macrophages. The relationship between extract bioactivity and metabolite profiles and quantifications were established using 1 H-NMR metabolomics and liquid chromatography-tandem mass spectrometry (LC-MS/MS). The possible metabolite biosynthesis pathway was constructed to further strengthen the findings.

    RESULTS: Water and sonication prepared air-dried leaves possessed the highest NO inhibition activity (IC50  = 190.43 ± 12.26 μg/mL, P 

    Matched MeSH terms: Reference Standards
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links