Displaying publications 61 - 80 of 128 in total

Abstract:
Sort:
  1. Fulltext Health risk associated with aluminium exposure in groundwater: a cross-sectional study in an Orang Asli village in Jenderam Hilir, Selangor, Malaysia
    Lina A, Shaharuddin M
    Malaysian Journal of Public Health Medicine, 2017;17 Special(1):58-62.
    The purpose of this study was to determine aluminium (Al) concentrations in groundwater used for drinking and cooking and its related health risk among population of 28th Mile Orang Asli village in Jenderam Hilir, Selangor, Malaysia. A total of 100 respondents were recruited, comprising 51 (51.0 %) male and 49 (49.0 %) female residents. Inductively coupled plasma mass spectrometry (ICP-MS) was used to determine Al concentration, while the LAMOTTE TRACER ORP PockeTester was used to measure pH levels. Statistical Package for Social Science (SPSS) was used to analyze the data. Results showed that Al concentration ranged from 0.041 - 0.136 mg/L with a mean of 0.136 + SD 0.041 mg/L, hence the values obtained were below the standard value (0.2 mg/L). pH levels ranged from 3.82 to 5.84, with a mean of 4.163 + SD 0.411, which is acidic and below the range permitted by the health authorities. The acidic nature may have an impact on the Al concentration in the water. The Hazard Index (HI) was found to be less than 1, thus there was no health risk of Al exposure in drinking water for the respondents involved. The study area was considered safe from having health risk associated with Al exposure.
    Matched MeSH terms: Drinking Water
  2. Fulltext Detection of Cryptosporidium and Cyclospora Oocysts from Environmental Water for Drinking and Recreational Activities in Sarawak, Malaysia
    Bilung LM, Tahar AS, Yunos NE, Apun K, Lim YA, Nillian E, et al.
    Biomed Res Int, 2017;2017:4636420.
    PMID: 29234679 DOI: 10.1155/2017/4636420
    Cryptosporidiosis and cyclosporiasis are caused by waterborne coccidian protozoan parasites of the genera Cryptosporidium and Cyclospora, respectively. This study was conducted to detect Cryptosporidium and Cyclospora oocysts from environmental water abstracted by drinking water treatment plants and recreational activities in Sarawak, Malaysia. Water samples (12 each) were collected from Sungai Sarawak Kanan in Bau and Sungai Sarawak Kiri in Batu Kitang, respectively. In addition, 6 water samples each were collected from Ranchan Recreational Park and UNIMAS Lake at Universiti Malaysia Sarawak, Kota Samarahan, respectively. Water physicochemical parameters were also recorded. All samples were concentrated by the iron sulfate flocculation method followed by the sucrose floatation technique. Cryptosporidium and Cyclospora were detected by modified Ziehl-Neelsen technique. Correlation of the parasites distribution with water physicochemical parameters was analysed using bivariate Pearson correlation. Based on the 24 total samples of environmental water abstracted by drinking water treatment plants, all the samples (24/24; 100%) were positive with Cryptosporidium, and only 2 samples (2/24; 8.33%) were positive with Cyclospora. Based on the 12 total samples of water for recreational activities, 4 samples (4/12; 33%) were positive with Cryptosporidium, while 2 samples (2/12; 17%) were positive with Cyclospora. Cryptosporidium oocysts were negatively correlated with dissolved oxygen (DO).
    Matched MeSH terms: Drinking Water/parasitology*
  3. Fulltext The effect of fluorosis on human teeth under light microscopy: A cross-sectional study
    Ramesh M, Narasimhan M, Krishnan R, Aruna RM, Kuruvilla S
    J Oral Maxillofac Pathol, 2017 Sep-Dec;21(3):345-350.
    PMID: 29391706 DOI: 10.4103/jomfp.JOMFP_247_16
    Background: Fluoride is needed for the normal development of bone and teeth; in high levels, it affects developing teeth and bone. Dental fluorosis (DF) is caused by ingestion of excess fluoride mainly through drinking water.

    Aim: The present study aims to observe and understand the histological changes of fluorosed teeth under light microscope (LM).

    Materials and Methods: Teeth which were indicated for extractions for orthodontic or periodontal problems were selected. Thirty extracted teeth were selected with varying degrees of DF based on modified Dean's fluorosis index. Ground sections of these teeth were prepared and the sections were studied under binocular LM. Photomicrographs were taken under high power objective using 15 megapixels Nikon camera.

    Results and Conclusion: Qualitative histologic changes in different grades of fluorosed teeth were evaluated in enamel, dentin, cementum and between their junctions. Fluoride interacts with enamel in both mineral phases and organic macromolecules by strong ionic and hydrogen bonds resulting in incomplete crystal growth at prism peripheries. This presents as hypomineralization of enamel and dentin, increased interglobular dentin, increased secondary curvatures and changes in cementum such as diffuse cementodentinal junction and increased thickness of Tomes' granular layer. Changes in the structure of the teeth with Dean's index below 2 and teeth with Dean's index of 2 and above were compared using Chi-square test. P value was found to be highly significant being 0.00047. Many of the features of dental fluorosis seen in the present study under light microscope are comparable to those results studied under specialized microscopes.
    Matched MeSH terms: Drinking Water
  4. Effect of food preparation using naturally-contaminated groundwater from La Pampa, Argentina: Estimation of elemental dietary intake from rice and drinking water
    Jaafar M, Marcilla AL, Felipe-Sotelo M, Ward NI
    Food Chem, 2018 Apr 25;246:258-265.
    PMID: 29291847 DOI: 10.1016/j.foodchem.2017.11.019
    Water from La Pampa, Argentina, was used for washing and cooking rice to examine the in-situ impact of using naturally-contaminated water for food preparation on the elemental dietary intake. Whilst washing with the control tap water (28 μg/L As) reduced the concentration of As in rice by 23%, the use of different well waters (281-1144 μg/L) increased As levels significantly (48-227%) in comparison with the original concentration in the rice (0.056 µg/g). Cooking the rice at a low water-to-rice ratio (2:1) using modern methods increased the levels of As in the cooked samples by 2-3 orders of magnitude for both pre-washed and un-washed rice. Similar trends were observed for vanadium. Although the levels of manganese, iron, copper, zinc and molybdenum in rice were reduced during washing and cooking for most water samples, the molybdenum concentration in the cooked rice doubled (2.2-2.9 µg/g) when using water containing >1 mg/L Mo.
    Matched MeSH terms: Drinking Water/chemistry*
  5. A simple method for chromium speciation analysis in contaminated water using APDC and a pre-heated glass tube followed by HPLC-PDA
    Salihu SO, Bakar NKA
    Talanta, 2018 May 01;181:401-409.
    PMID: 29426532 DOI: 10.1016/j.talanta.2018.01.041
    In this study, a simple sample preparation method was developed for the determination of tri-and hexavalent chromium in water samples. It utilizes a pre-heated customized glass tube (CGT), to supply the heat energy required for the reaction of Cr(III) with ammonium pyrrolidinedithiocarbamate (APDC). The products of the Cr complexes, tris(1-pyrrolidinecarbodithioato)chromium(III) and bis(1-pyrrolidinecarbodithioato)[1-pyrrolidinecarbodithio(thioperoxoato)]chromium(III) were chromatographed with Shimadzu LC-20AT and Zobax Eclipse C18 (150mm × 4.6mm, 5µm) column using ACN: Water, (7:3, v/v) as the mobile phase. The concentration of Cr(III) ranged from 0.06mgL-1to 0.09mgL-1and that of Cr(VI) was between 0.02mgL-1to 0.04mgL-1in the samples. Percentage recoveries from spiked real samples were between 87% (tap water) to 110% (wastewater) for Cr(III) and 92% (pond water) to 117% (tap water) for Cr(VI). The limits of detection (LODs) were 0.0029mgL-1and 0.0014mg/L-1for Cr(III) Cr(VI) respectively. While the limits of quantitation (LOQs), were 0.0098mgL-1and 0.0047mgL-1for Cr(III) and Cr(VI) respectively. Method precision (RSD (%)) was 3.3% and 3.5% for Cr(III) and Cr(VI) respectively. The developed method was applied for the speciation analysis of chromium in drinking water, tap water, wastewater, river water, and pond water samples. Our findings proved the method is simple and inexpensive. The method was validated by the analysis of a certified reference material (CRM) SLRS-4. The percentage recovery and RSD(%) from the spiked CRM were 91% and 115% and 0.32% and 1.4% for Cr(III) and Cr(VI) respectively.
    Matched MeSH terms: Drinking Water
  6. Imported eosinophilic fever with myositis: A diagnostic challenge
    Camprubí D, Rodriguez-Valero N, Losada I, Grau-Junyent JM, Muñoz J
    Travel Med Infect Dis, 2018 05 23;24:16.
    PMID: 29802894 DOI: 10.1016/j.tmaid.2018.05.009
    Matched MeSH terms: Drinking Water/parasitology
  7. Development of emergency food assistance design: a nutritionally balanced, culturally tailored and cost-effective strategy for flood mitigation
    Balachanthar S, Zakaria NA, Lee LK
    Ecol Food Nutr, 2018 07 10;57(4):314-329.
    PMID: 29989434 DOI: 10.1080/03670244.2018.1492380
    Emergency food assistance forms an integral component of flood mitigation in Malaysia. A cross-sectional survey investigating emergency food assistance among 202 flood victims was conducted and alternative food assistance plan was developed using linear programming targeting post-disaster food requirement scenarios. From the study, the receipt of food aid was significantly associated with ethnicity, household income, residential area and evacuation into temporary shelters. Linear programming analysis identified nutritionally appropriate food assistance targeting mass feeding, emergency food basket, and immediate food requirement for as low as MYR 6.07 (1.55 USD), MYR 7.14 (1.82 USD), and MYR 8.00 (2.04 USD), respectively. This study provides nutritional guidelines for disaster food assistance policy.
    Matched MeSH terms: Drinking Water
  8. Fulltext Health Risk of Polonium 210 Ingestion via Drinking Water: An Experience of Malaysia
    Ahmed MF, Alam L, Mohamed CAR, Mokhtar MB, Ta GC
    Int J Environ Res Public Health, 2018 09 20;15(10).
    PMID: 30241360 DOI: 10.3390/ijerph15102056
    The presence of toxic polonium-210 (Po-210) in the environment is due to the decay of primordial uranium-238. Meanwhile, several studies have reported elevated Po-210 radioactivity in the rivers around the world due to both natural and anthropogenic factors. However, the primary source of Po-210 in Langat River, Malaysia might be the natural weathering of granite rock along with mining, agriculture and industrial activities. Hence, this is the first study to determine the Po-210 activity in the drinking water supply chain in the Langat River Basin to simultaneously predict the human health risks of Po-210 ingestion. Therefore, water samples were collected in 2015⁻2016 from the four stages of the water supply chain to analyze by Alpha Spectrometry. Determined Po-210 activity, along with the influence of environmental parameters such as time-series rainfall, flood incidents and water flow data (2005⁻2015), was well within the maximum limit for drinking water quality standard proposed by the Ministry of Health Malaysia and World Health Organization. Moreover, the annual effective dose of Po-210 ingestion via drinking water supply chain indicates an acceptable carcinogenic risk for the populations in the Langat Basin at 95% confidence level; however, the estimated annual effective dose at the basin is higher than in many countries. Although several studies assume the carcinogenic risk of Po-210 ingestion to humans for a long time even at low activity, however, there is no significant causal study which links Po-210 ingestion via drinking water and cancer risk of the human. Since the conventional coagulation method is unable to remove Po-210 entirely from the treated water, introducing a two-layer water filtration system at the basin can be useful to achieve SDG target 6.1 of achieving safe drinking water supplies well before 2030, which might also be significant for other countries.
    Matched MeSH terms: Drinking Water/analysis*
  9. Triple-Indicator-Based Multidimensional Colorimetric Sensing Platform for Heavy Metal Ion Detections
    Idros N, Chu D
    ACS Sens, 2018 09 28;3(9):1756-1764.
    PMID: 30193067 DOI: 10.1021/acssensors.8b00490
    Heavy metals are highly toxic at trace levels and their pollution has shown great threat to the environment and public health worldwide where current detection methods require expensive instrumentation and laborious operation, which can only be accomplished in centralized laboratories. Herein, we report a low-cost, paper-based microfluidic analytical device (μPAD) for facile, portable, and disposable monitoring of mercury, lead, chromium, nickel, copper, and iron ions. Triple indicators or ligands that contain ions or molecules are preloaded on the μPADs and upon addition of a metal ion, the colorimetric indicators will elicit color changes observed by the naked eyes. The color features were quantitatively analyzed in a three-dimensional space of red, green, and blue or the RGB-space using digital imaging and color calibration techniques. The sensing platform offers higher accuracy for cross references, and is capable of simultaneous detection and discrimination of different metal ions in even real water samples. It demonstrates great potential for semiquantitative and even qualitative analysis with a sensitivity below the safe limit concentrations, and a controlled error range.
    Matched MeSH terms: Drinking Water/analysis
  10. Assessment of groundwater nitrate contamination hazard in a semi-arid region by using integrated parametric IPNOA and data-driven logistic regression models
    Rizeei HM, Azeez OS, Pradhan B, Khamees HH
    Environ Monit Assess, 2018 Oct 04;190(11):633.
    PMID: 30288624 DOI: 10.1007/s10661-018-7013-8
    Groundwater hazard assessments involve many activities dealing with the impacts of pollution on groundwater, such as human health studies and environment modelling. Nitrate contamination is considered a hazard to human health, environment and ecosystem. In groundwater management, the hazard should be assessed before any action can be taken, particularly for groundwater pollution and water quality. Thus, pollution due to the presence of nitrate poses considerable hazard to drinking water, and excessive nutrient loads deteriorate the ecosystem. The parametric IPNOA model is one of the well-known methods used for evaluating nitrate content. However, it cannot predict the effect of soil and land use/land cover (LULC) types on calculations relying on parametric well samples. Therefore, in this study, the parametric model was trained and integrated with the multivariate data-driven model with different levels of information to assess groundwater nitrate contamination in Saladin, Iraq. The IPNOA model was developed with 185 different well samples and contributing parameters. Then, the IPNOA model was integrated with the logistic regression (LR) model to predict the nitrate contamination levels. Geographic information system techniques were also used to assess the spatial prediction of nitrate contamination. High-resolution SPOT-5 satellite images with 5 m spatial resolution were processed by object-based image analysis and support vector machine algorithm to extract LULC. Mapping of potential areas of nitrate contamination was examined using receiver operating characteristic assessment. Results indicated that the optimised LR-IPNOA model was more accurate in determining and analysing the nitrate hazard concentration than the standalone IPNOA model. This method can be easily replicated in other areas that have similar climatic condition. Therefore, stakeholders in planning and environmental decision makers could benefit immensely from the proposed method of this research, which can be potentially used for a sustainable management of urban, industrialised and agricultural sectors.
    Matched MeSH terms: Drinking Water/analysis; Drinking Water/chemistry
  11. Fulltext Prevalence of schistosomiasis and associated risk factors among school children in Um-Asher Area, Khartoum, Sudan
    Hajissa K, Muhajir AEMA, Eshag HA, Alfadel A, Nahied E, Dahab R, et al.
    BMC Res Notes, 2018 Oct 31;11(1):779.
    PMID: 30382901 DOI: 10.1186/s13104-018-3871-y
    OBJECTIVE: Schistosomiasis remains one of the most common parasitic diseases worldwide. This is a cross-sectional study aimed to determine the prevalence of schistosomiasis and its associated risk factors among primary school children in Um-Asher area. The study was conducted among 170 primary school students in Um-Asher area from November 2017 to February 2018. Urine and stool samples were collected and examined for schistosomiasis infections. Moreover, data on sociodemographic characteristics and associated risk factors were obtained using a questionnaire.

    RESULTS: The overall prevalence of Schistosoma haematobium was 12.9%, whereas that of Schistosoma mansoni was 2.95%. Additionally, the males had higher prevalence (60%) of S. mansoni than females (40%). However, both gender were equally infected with S. haematobium (50%). With regard to risk factors, distance of residence from water source and source of drinking water are relatively associated with the infection.

    Matched MeSH terms: Drinking Water
  12. Fulltext The effect of dental unit waterline flushing on the quality of water in dental teaching center in Malaysia
    Sa’adiah Shahabudin, Rohayu Hami, Lim, Lee-Sim, Amalina Salleh
    Journal of Biomedical and Clinical Sciences, 2018;3(1):72-74.
    MyJurnal
    The aim of this study to assess the efficiency of flushing
    method of Dental Unit Waterline (DUWL) system in reducing the
    number of microorganism. Water samples were taken before and after
    two minutes of flushing from air-water syringes system in ten randomly
    selected dental units in a Dental Teaching Centre. These samples
    were immediately transferred to the microbiology laboratory in the cool
    box within 8 hours for the heterotrophic plate count (HPC) test. Paired
    t-test was used to analyse number of microbe before and after flushing.
    The numbers of colony forming unit (CFU) ranged from 13,000 to
    120,000CFU/ml in unflushed samples, and 3,000 to 15,000CFU/ml in
    flushed samples. The mean HPC post-flushing was lower than preflushing [8360.00 (4561.48) vs 63300.00 (44587.12) CFU/ml]. The
    mean HPC between pre- and post-flushing was significantly different
    (P=0.004, 95% CI 22039.52, 87840.48). The coliform count from the
    control was 140 CFU/ml. In conclusion, flushing method of DUWL
    system significantly reduces the number of microorganisms in the
    dental unit. However, the level of microorganisms still does not meet
    the standard guideline by Environmental Protection Agency for safe
    drinking water, which should be below 500 CFU/ml. In our opinion, the
    duration of flushing should be increased and additional chemical
    treatments of the dental units should be implemented to ensure the
    safety of patients and dental personnel.
    Matched MeSH terms: Drinking Water
  13. Fabrication of calixarene-grafted bio-polymeric magnetic composites for magnetic solid phase extraction of non-steroidal anti-inflammatory drugs in water samples
    Syed Yaacob SFF, Mohd Jamil AK, Kamboh MA, Wan Ibrahim WA, Mohamad S
    PeerJ, 2018;6:e5108.
    PMID: 30002963 DOI: 10.7717/peerj.5108
    Calixarene framework functionalized bio-polymeric magnetic composites (MSp-TDI-calix) were synthesized and utilized as magnetic solid-phase extraction (MSPE) sorbent for the extraction of non-steroidal anti-inflammatory drugs (NSAIDs), namely indoprofen (INP), ketoprofen (KTP), ibuprofen (IBP) and fenoprofen (FNP), from environmental water samples. MSp-TDI-calix was characterized by FT-IR, XRD, FESEM, EDX, VSM and BET analysis, and the results were compared with Sp-TDI and Sp-TDI-calix. To maximize the extraction performance of MSp-TDI-calix decisive MSPE affective parameters such as sorbent amount, extraction time, sample volume, type of organic eluent, volume of organic eluent, desorption time and pH were comprehensively optimized prior to HPLC-DAD determination. The analytical validity of the proposed MSPE method was evaluated under optimized conditions and the following figures of merit were acquired: linearity with good determination coefficient (R2 ≥ 0.991) over the concentration range of 0.5-500 µg/L, limits of detection (LODs) ranged from 0.06-0.26 µg/L and limits of quantitation (LOQ) between 0.20-0.89 µg/L. Excellent reproducibility and repeatability under harsh environment with inter-day and intra-day relative standard deviations were obtained in the range of 2.5-3.2% and 2.4-3.9% respectively. The proposed method was successfully applied for analysis of NSAIDs in tap water, drinking water and river water with recovery efficiency ranging from 88.1-115.8% with %RSD of 1.6-4.6%.
    Matched MeSH terms: Drinking Water
  14. Fulltext Release of bisphenol a from polycarbonate and polyethylene terephthalate drinking water bottles under different storage conditions and its associated health risk
    Wen Min Yun, Yu Bin Ho, Eugenie Sin Sing Tan, Vivien How
    Malaysian Journal of Medicine and Health Sciences, 2018;14(102):1-9.
    MyJurnal
    Bisphenol A (BPA) is a controversial plastics ingredient used mainly in the production of polycarbonate plastics (PC) and epoxy resins that widely used nowadays in food and drink packaging. Even though BPA is not involved in polyethylene terephthalate (PET) manufacturing, recent study had reported the present of BPA in PET water bottle. This study was conducted to investigate effects storage conditions on release of BPA from PC and PET bottled water as well as to assess health risks associated with consumption. Methods: Solid phase extraction (SPE) was used to extract the samples, followed by analysis using ultra high performance liquid chromatography with fluorescence detector (UHPLC-FLD). The possibility of developing chronic non-carcinogenic health risk among consumers of bottled water was evaluated using hazard quotient (HQ). Results: Results showed that BPA migrated from PC and PET water bottles at concentrations ranging from 9.13 to 257.67 ng/L and 11.53 ng/L to 269.87 ng/L respectively. Concentrations of BPA were higher in PET bottled water compared to PC bottled water across all storage conditions. Higher storage temperature and longer storage duration increased BPA concentrations in PC and PET bottled water. Concentrations of BPA in bottled water which were kept in a car and were exposed to sunlight were higher than control samples which were stored indoor at room temperature. Conclusion: No significant chronic non-carcinogenic health risks were calculated for daily ingestion of BPA-contaminated bottled water; calculated HQ was less than one.
    Matched MeSH terms: Drinking Water
  15. Selective magnetic mercury(ii) ion capturing ligand-doped silica gel for water analysis
    Khor SW, Lee YK, Tay KS
    Analyst, 2019 Mar 21;144(6):1968-1974.
    PMID: 30694266 DOI: 10.1039/c8an02362j
    Preparation of selective magnetic adsorbents for dispersive micro-solid phase extraction often involves multi-step reactions which are time consuming. This study demonstrates a simplified method for the synthesis of a magnetic adsorbent, which is selective towards the adsorption of mercury(ii) ions (Hg2+). In this method, the incorporation of a metal capturing ligand (3-oxo-1,3-diphenylpropyl-2-(naphthalen-2-ylamino) ethylcarbamodithioate) and the coating of magnetic particles with silica gel was performed in a single step. This adsorbent was then used in solid-phase microextraction for the preconcentration of Hg2+ in water. In this study, a mercury analyzer was used to quantify the Hg2+. Under optimized conditions, the developed analytical method achieved a low detection limit (4.0 ng L-1), satisfactory enrichment factor (96.4) and wide linearity range (50.0-5000 ng L-1) with a good coefficient of determination (0.9985) and good repeatability (<7%). The preconcentration factor of this method was 100. This proposed method was also successfully utilized for the determination of Hg2+ in drinking water, tap water and surface water with good recovery (>91%) and high intra-day and inter-day precision.
    Matched MeSH terms: Drinking Water
  16. Non-nutritive artificial sweeteners as an emerging contaminant in environment: A global review and risks perspectives
    Praveena SM, Cheema MS, Guo HR
    Ecotoxicol Environ Saf, 2019 Apr 15;170:699-707.
    PMID: 30580164 DOI: 10.1016/j.ecoenv.2018.12.048
    Generally, non-nutritive artificial sweeteners are widely utilized as sugar substitute in various applications. With various applications, non-nutritive artificial sweeteners are now being recognized as emerging contaminants with high water persistence and are chemically stable in environment. Although non-nutritive artificial sweeteners were documented on their occurrence in environment, yet their potential impacts to environment and human health remain ambiguous. Therefore, this review was prepared to provide a more comprehensive insight of non-nutritive artificial sweeteners in environment matrixes by highlighting special concerns on human health and environmental risks. Precisely, this review monitors the exploration of non-nutritive artificial sweeteners occurrences as an emerging contaminants in environment worldwide and their associated risks to human as well as environment. At present, there are a total of 24 non-nutritive artificial sweeteners' studies with regards to their occurrence in the environment from 38 locations globally, spanning across Europe including United Kingdoms, Canada, United States and Asia. Overall, the quantitative findings suggested that the occurrence of non-nutritive artificial sweeteners is present in surface water, tap water, groundwater, seawater, lakes and atmosphere. Among these environmental matrixes, surface water was found as the most studied matrix involving non-nutritive artificial sweeteners. However, findings on non-nutritive artificial sweeteners impacts on human health and environment are limited to understanding its overall potential impacts and risks. Additionally, this review also serves as a framework for future monitoring plans and environmental legislative to better control these emerging contaminants in environment.
    Matched MeSH terms: Drinking Water/chemistry*
  17. Use of cellulose acetate/polyphenylsulfone derivatives to fabricate ultrafiltration hollow fiber membranes for the removal of arsenic from drinking water
    Kumar M, RaoT S, Isloor AM, Ibrahim GPS, Inamuddin, Ismail N, et al.
    Int J Biol Macromol, 2019 May 15;129:715-727.
    PMID: 30738161 DOI: 10.1016/j.ijbiomac.2019.02.017
    Cellulose acetate (CA) and cellulose acetate phthalate (CAP) were used as additives (1 wt%, 3 wt%, and 5 wt%) to prepare polyphenylsulfone (PPSU) hollow fiber membranes. Prepared hollow fiber membranes were characterized by surface morphology using scanning electron microscopy (SEM), surface roughness by atomic force microscopy (AFM), the surface charge of the membrane was analyzed by zeta potential measurement, hydrophilicity by contact angle measurement and the functional groups by fourier transform infrared spectroscopy (FTIR). Fouling resistant nature of the prepared hollow fiber membranes was evaluated by bovine serum albumin (BSA) and molecular weight cutoff was investigated using polyethylene glycol (PEG). By total organic carbon (TOC), the percentage rejection of PEG was found to be 14,489 Da. It was found that the hollow fiber membrane prepared by the addition of 5 wt% of CAP in PPSU confirmed increased arsenic removal from water as compared to hollow fiber membrane prepared by 5 wt% of CA in PPSU. The removal percentages of arsenic with CA-5 and CAP-5 hollow fiber membrane was 34% and 41% with arsenic removal permeability was 44.42 L/m2h bar and 40.11 L/m2h bar respectively. The increased pure water permeability for CA-5 and CAP-5 hollow fiber membrane was 61.47 L/m2h bar and 69.60 L/m2 h bar, respectively.
    Matched MeSH terms: Drinking Water/chemistry*
  18. Comparison of time-restricted feeding and Islamic fasting: a scoping review
    Ismail S, Manaf RA, Mahmud A
    East Mediterr Health J, 2019 Jun 04;25(4):239-245.
    PMID: 31210344 DOI: 10.26719/emhj.19.011
    Background: Research on the health benefits of fasting is growing; this includes time-restricted feeding and Islamic fasting.

    Aims: This article aims to review and highlight the similarities and differences between time-restricted feeding and Islamic fasting during Ramadan.

    Methods: A scoping review was undertaken to identify relevant articles that answered the research question: what are the similarities and differences in characteristics of time-restricted feeding and Islamic fasting? MEDLINE/PubMed was searched using the terms: time-restricted feeding, and weight. Inclusion criteria were: original research and review articles; written in English; and published between the years 2000 and 2017.

    Results: A total of 25 articles that answered the research question were included in the review: 15 original research papers and 10 reviews. The findings suggest that Ramadan fasting is a form of time-restricted feeding in the contemporary context because of the period when eating is not allowed. The fasting duration reported in time-restricted feeding ranged from 4 to 24 hours, which is longer than that of Islamic fasting which is between 8 and 20 hours. Both time-restricted feeding and Islamic fasting have been found to have positive health effects, including weight reduction.

    Conclusion: Time-restricted feeding and Islamic fasting have many similar characteristics and reported positive health effects.

    Matched MeSH terms: Drinking Water
  19. A contingent valuation approach to evaluating willingness to pay for an improved water pollution management system in Dhaka City, Bangladesh
    Sehreen F, Masud MM, Akhtar R, Masum MRA
    Environ Monit Assess, 2019 Jun 22;191(7):457.
    PMID: 31230139 DOI: 10.1007/s10661-019-7595-9
    The city of Dhaka has been ranked repeatedly as the most polluted, the most populous, and the most unbearable city in the world. More than 19.5 million inhabitants live in Dhaka, and the population growth rate of urban areas in Bangladesh is almost double that of rural areas. Rapid urbanization is one of the leading contributors to water pollution in Dhaka and could prevent the country from achieving sustainable development. Therefore, this study estimates respondents' willingness to pay (WTP) to improve water pollution management systems and identifies factors that influence WTP in Dhaka. This study employed the contingent valuation method (CVM) to estimate WTP of the respondents. Data were collected using a structured questionnaire with CVM questions, which was distributed to households in the study areas. The results revealed that 67% of the respondents are willing to pay for an improved water pollution management system, while 31.8% of households are unwilling to pay. The study also found that socio-economic factors (e.g., income and education) and perception significantly influence WTP. Therefore, this paper will provide directives for policymakers in developing an effective policy framework, as well as sensitize all stakeholders to the management of water pollution in Dhaka. The study suggests that social institutions, financial institutions, banks, non-government organizations (NGOs), insurance companies, and the government could provide effective outreach programs for water pollution management as part of their social responsibility.
    Matched MeSH terms: Drinking Water/analysis*
  20. Fulltext Seasonal quality variation and environmental risks associated with the consumption of surface water: implication from the Landzun Stream, Bida Nigeria
    Daramola J, M Ekhwan T, Adepehin EJ, Mokhtar J, Lam KC, Er AC
    Heliyon, 2019 Jul;5(7):e02121.
    PMID: 31384682 DOI: 10.1016/j.heliyon.2019.e02121
    Water constitutes a major environmental and public health concerns worldwide. A large proportion of global water consumption is sourced from surface water. The dependency level on surface water is higher in developing countries, especially in rural-to-semi-urban areas, where subsurface water is not accessible. Presented in this paper is a spatiotemporal and hydrochemical quality assessment of the spring-originated Landzun Stream in Bida, Nigeria; which is usually consumed in its untreated state. Water samples were systematically collected in eighteen locations along the stream channel in both rainy and dry seasons at an equidistance interval of 500m. On-site and laboratory measurement of important physical and hydrochemical parameters were carried out using standard procedures. Water temperature in the rainy season (34-37 °C) slightly exceeds measured values in the dry season (29-33 °C). 72.22% (rainy) and 83.33% (dry) of collected samples did not meet the odourless requirement for drinking water. Similarly, estimated percentages of 66.67 and 94.44 of collected samples in rainy and dry seasons respectively have a taste. Contrary to data in the rainy season, 89%, 11%, 67% and 56% of the dry season's samples were enriched in magnesium (Mg), lead (Pb), potassium (K) and iron (Fe) respectively above the 2018 World Health Organisation guidelines for drinking water. This study further established that seasonal variation plays a major role in altering the aesthetic surface water quality. The intake of untreated surface water is a vehicle for potential water-borne diseases and allergies, hence alternative sources of drinking water for the populace dependent on the Landzun Stream is recommended to reduce risks and possible dangers of consuming the stream water.
    Matched MeSH terms: Drinking Water
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links