MyMedR

Displaying publications 81 - 100 of 120 in total

Abstract:

Sort:

Elastomeric biocomposite of silver-containing mesoporous bioactive glass and poly(1,8-octanediol citrate): Physiochemistry and in vitro antibacterial capacity in tissue engineering applications

Pourshahrestani S, Zeimaran E, Kadri NA, Gargiulo N, Jindal HM, Hasikin K, et al.

Mater Sci Eng C Mater Biol Appl, 2019 May;98:1022-1033.
PMID: 30812986 DOI: 10.1016/j.msec.2019.01.022

A novel series of silver-doped mesoporous bioactive glass/poly(1,8-octanediol citrate) (AgMBG/POC) elastomeric biocomposite scaffolds were successfully constructed by a salt-leaching technique for the first time and the effect of inclusion of different AgMBG contents (5, 10, and 20 wt%) on physicochemical and biological properties of pure POC elastomer was evaluated. Results indicated that AgMBG particles were uniformly dispersed in the POC matrix and increasing the AgMBG concentration into POC matrix up to 20 wt% enhanced thermal behaviour, mechanical properties and water uptake ability of the composite scaffolds compared to those from POC. The 20%AgMBG/POC additionally showed higher degradation rate in Tris(hydroxymethyl)-aminomethane-HCl (Tris-HCl) compared with pure POC and lost about 26% of its initial weight after soaking for 28 days. The AgMBG phase incorporation also significantly endowed the resulting composite scaffolds with efficient antibacterial properties against Escherichia coli and Staphylococcus aureus bacteria while preserving their favorable biocompatibility with soft tissue cells (i.e., human dermal fibroblast cells). Taken together, our results suggest that the synergistic effect of both AgMBG and POC make these newly designed AgMBG/POC composite scaffold an attractive candidate for soft tissue engineering applications.

Matched MeSH terms: Elasticity/drug effects
Fulltext Comparison of process parameter optimization using different designs in nanoemulsion-based formulation for transdermal delivery of fullerene

Ngan CL, Basri M, Lye FF, Fard Masoumi HR, Tripathy M, Karjiban RA, et al.

Int J Nanomedicine, 2014;9:4375-86.
PMID: 25258528 DOI: 10.2147/IJN.S65689

This research aims to formulate and to optimize a nanoemulsion-based formulation containing fullerene, an antioxidant, stabilized by a low amount of mixed surfactants using high shear and the ultrasonic emulsification method for transdermal delivery. Process parameters optimization of fullerene nanoemulsions was done by employing response surface methodology, which involved statistical multivariate analysis. Optimization of independent variables was investigated using experimental design based on Box-Behnken design and central composite rotatable design. An investigation on the effect of the homogenization rate (4,000-5,000 rpm), sonication amplitude (20%-60%), and sonication time (30-150 seconds) on the particle size, ζ-potential, and viscosity of the colloidal systems was conducted. Under the optimum conditions, the central composite rotatable design model suggested the response variables for particle size, ζ-potential, and viscosity of the fullerene nanoemulsion were 152.5 nm, -52.6 mV, and 44.6 pascal seconds, respectively. In contrast, the Box-Behnken design model proposed that preparation under the optimum condition would produce nanoemulsion with particle size, ζ-potential, and viscosity of 148.5 nm, -55.2 mV, and 39.9 pascal seconds, respectively. The suggested process parameters to obtain optimum formulation by both models yielded actual response values similar to the predicted values with residual standard error of <2%. The optimum formulation showed more elastic and solid-like characteristics due to the existence of a large linear viscoelastic region.

Matched MeSH terms: Elasticity
Fulltext Rheological studies of PMMA-PVC based polymer blend electrolytes with LiTFSI as doping salt

Liew CW, Durairaj R, Ramesh S

PLoS One, 2014;9(7):e102815.
PMID: 25051241 DOI: 10.1371/journal.pone.0102815

In this research, two systems are studied. In the first system, the ratio of poly (methyl methacrylate) (PMMA) and poly (vinyl chloride) (PVC) is varied, whereas in the second system, the composition of PMMA-PVC polymer blends is varied with dopant salt, lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) with a fixed ratio of 70 wt% of PMMA to 30 wt% of PVC. Oscillation tests such as amplitude sweep and frequency sweep are discussed in order to study the viscoelastic properties of samples. Elastic properties are much higher than viscous properties within the range in the amplitude sweep and oscillatory shear sweep studies. The crossover of G' and G'' is absent. Linear viscoelastic (LVE) range was further determined in order to perform the frequency sweep. However, the absence of viscous behavior in the frequency sweep indicates the solid-like characteristic within the frequency regime. The viscosity of all samples is found to decrease as shear rate increases.

Matched MeSH terms: Elasticity
The mechanisms of fibroblast-mediated compaction of collagen gels and the mechanical niche around individual fibroblasts

Feng Z, Wagatsuma Y, Kikuchi M, Kosawada T, Nakamura T, Sato D, et al.

Biomaterials, 2014 Sep;35(28):8078-91.
PMID: 24976242 DOI: 10.1016/j.biomaterials.2014.05.072

Fibroblast-mediated compaction of collagen gels attracts extensive attention in studies of wound healing, cellular fate processes, and regenerative medicine. However, the underlying mechanism and the cellular mechanical niche still remain obscure. This study examines the mechanical behaviour of collagen fibrils during the process of compaction from an alternative perspective on the primary mechanical interaction, providing a new viewpoint on the behaviour of populated fibroblasts. We classify the collagen fibrils into three types - bent, stretched, and adherent - and deduce the respective equations governing the mechanical behaviour of each type; in particular, from a putative principle based on the stationary state of the instantaneous Hamiltonian of the mechanotransduction system, we originally quantify the stretching force exerted on each stretched fibrils. Via careful verification of a structural elementary model based on this classification, we demonstrate a clear physical picture of the compaction process, quantitatively elucidate the panorama of the micro mechanical niche and reveal an intrinsic biphasic relationship between cellular traction force and matrix elasticity. Our results also infer the underlying mechanism of tensional homoeostasis and stress shielding of fibroblasts. With this study, and sequel investigations on the putative principle proposed herein, we anticipate a refocus of the research on cellular mechanobiology, in vitro and in vivo.

Matched MeSH terms: Elasticity
Mechanical behaviour of in-situ chondrocytes subjected to different loading rates: a finite element study

Moo EK, Herzog W, Han SK, Abu Osman NA, Pingguan-Murphy B, Federico S

Biomech Model Mechanobiol, 2012 Sep;11(7):983-93.
PMID: 22234779 DOI: 10.1007/s10237-011-0367-2

Experimental findings indicate that in-situ chondrocytes die readily following impact loading, but remain essentially unaffected at low (non-impact) strain rates. This study was aimed at identifying possible causes for cell death in impact loading by quantifying chondrocyte mechanics when cartilage was subjected to a 5% nominal tissue strain at different strain rates. Multi-scale modelling techniques were used to simulate cartilage tissue and the corresponding chondrocytes residing in the tissue. Chondrocytes were modelled by accounting for the cell membrane, pericellular matrix and pericellular capsule. The results suggest that cell deformations, cell fluid pressures and fluid flow velocity through cells are highest at the highest (impact) strain rate, but they do not reach damaging levels. Tangential strain rates of the cell membrane were highest at the highest strain rate and were observed primarily in superficial tissue cells. Since cell death following impact loading occurs primarily in superficial zone cells, we speculate that cell death in impact loading is caused by the high tangential strain rates in the membrane of superficial zone cells causing membrane rupture and loss of cell content and integrity.

Matched MeSH terms: Elasticity
Physicochemical, textural and viscoelastic properties of palm diacylglycerol bakery shortening during storage

Cheong LZ, Tan CP, Long K, Affandi Yusoff MS, Lai OM

J Sci Food Agric, 2010 Oct;90(13):2310-7.
PMID: 20661900 DOI: 10.1002/jsfa.4088

Diacylglycerol (DAG), which has health-enhancing properties, is sometimes added to bakery shortening to produce baked products with enhanced physical functionality. Nevertheless, the quantity present is often too little to exert any positive healthful effects. This research aimed to produce bakery shortenings containing significant amounts of palm diacyglycerol (PDG). Physicochemical, textural and viscoelastic properties of the PDG bakery shortenings during 3 months storage were evaluated and compared with those of commercial bakery shortening (CS).

Matched MeSH terms: Elasticity
Effect of cooking on physical and sensory properties of fresh yellow alkaline noodles prepared by partial substitution of wheat flour with soy protein isolate and treated with cross-linking agents

Yeoh SY, Alkarkhi AF, Ramli SB, Easa AM

Int J Food Sci Nutr, 2011 Jun;62(4):410-7.
PMID: 21306189 DOI: 10.3109/09637486.2010.539555

Yellow alkaline noodles (YAN) prepared by partial substitution of wheat flour with soy protein isolate and treated with microbial transglutaminase (MTG) and ribose were investigated during cooking. Cooking caused an increase in lightness but a decrease in redness and yellowness, pH, tensile strength and elasticity values of noodles. The extents of these changes were influenced by formulation and cross-linking treatments. The pH and lightness for YAN-ribose were lowest but the yellowness and redness were the highest whilst the tensile strength and elasticity values remained moderate. For YAN-MTG, the color and pH values were moderate, but tensile strength and elasticity values were the highest. YAN prepared with both cross-linking agents had physical values between YAN-ribose and YAN-MTG. Although certain sensory parameters showed differences in score, the overall acceptability of all 10-min-cooked YAN was similar. It is possible to employ cross-linking agents to improve physical properties of cooked YAN.

Matched MeSH terms: Elasticity
Fulltext The blood pressure variability, arterial elasticity and humoral factors in subjects with family history of hypertension

Rafidah HM, Azizi A, Suhaimi H, Noriah MN

Med J Malaysia, 2008 Mar;63(1):9-16.
PMID: 18935724 MyJurnal

Normotensive subjects with family history of hypertension (FHT) have been reported to have increased left ventricular mass index and reduced ventricular compliance. Of interest is whether blood pressure variability (BPV), which has been associated with target organ damage, is then part of this complex inherited syndrome? The objectives of this study are to determine whether there are any significant differences in BPV, arterial compliance and humoral factors in subjects with FHT as compared to controls. Thirty-five subjects with self reported FHT and 35 matched controls underwent 24 hour BP monitoring (BR-102, Schiller Inc. Germany). Arterial compliance was measured using systolic pulse wave tonometry (HDI/Pulsewave Cardiovascular Profiling Instrument, Hypertension Diagnostic Inc. USA). None of the subjects were hypertensive or diabetic. Out of these numbers, 25 subjects with FHT and 26 controls had measurements of plasma catecholamines, plasma renin and serum aldosterone. Catecholamines were assayed with high performance liquid chromatography, while both renin and aldosterone measurements were by radioimmunoassay. Subjects with FHT have higher night time BPV. There was no significant difference in arterial compliances between both groups. There were increased level of norepinephrine (NE) in subjects with FHT but epinephrine (E), renin and aldosterone levels were similar in both groups. There were no correlations between NE and BPV but E was negatively associated with daytime and mean arterial systolic BPV. In conclusion subjects with FHT demonstrated a higher night time BPV and NE level as compared to controls.

Matched MeSH terms: Elasticity
Fulltext Blood pressure variability and arterial elasticity in hypertensive subjects

Rafidah HM, Azizi A, Noriah MN

Med J Malaysia, 2006 Jun;61(2):189-98.
PMID: 16898310 MyJurnal

Apart from the mean 24 hour ambulatory blood pressure (ABP), the blood pressure variability (BPV) also bears an independent relationship with target-organ damage in hypertension. A reduction in arterial compliance has been demonstrated in hypertension but its relation to BPV is still unknown. The aim of the study is to compare BPV and arterial compliance between hypertensive and normotensive subjects. Eighteen hypertensives and 18 controls were enrolled. Noninvasive 24-hour ABP monitoring was performed with BR-102 monitor (Schiller Inc. Germany). Arterial compliance was determined by the HDI/Pulsewave Research Cardiovascular Profiling Instrument (Hypertension Diagnostic Inc. USA). There were significantly higher systolic, diastolic and mean arterial BPV in hypertensives as compared to normotensive group. Only systolic BPV remained significantly high in hypertensives during night time. There were lower arterial compliances in hypertensive as compared to normotensive group. No significant relationship however was found between BPV and arterial compliance in hypertensive subjects. In conclusion, there were higher BPV and lower arterial compliances in hypertensive subjects as compared to normotensive subjects.

Matched MeSH terms: Elasticity
Shear flow behaviour and emulsion-stabilizing effect of natural polysaccharide-protein gum in aqueous system and oil/water (O/W) emulsion

Amid BT, Mirhosseini H

Colloids Surf B Biointerfaces, 2013 Mar 1;103:430-40.
PMID: 23261563 DOI: 10.1016/j.colsurfb.2012.11.015

The main objective of the current work was to characterize the shear rheological flow behaviour and emulsifying properties of the natural biopolymer from durian seed. The present study revealed that the extraction condition significantly affected the physical and functional characteristics of the natural biopolymer from durian seed. The dynamic oscillatory test indicated that the biopolymer from durian seed showed more gel (or solid) like behaviour than the viscous (or liquid) like behaviour (G'>G″) at a relatively high concentration (20%) in the fixed frequency (0.1 Hz). This might be explained by the fact that the gum coils disentangle at low frequencies during the long period of oscillation, thus resulting in more gel like behaviour than the viscous like behaviour. The average droplet size of oil in water (O/W) emulsions stabilized by durian seed gum significantly varied from 0.42 to 7.48 μm. The results indicated that O/W emulsions showed significant different stability after 4 months storage. This might be interpreted by the considerable effect of the extraction condition on the chemical and molecular structure of the biopolymer, thus affecting its emulsifying capacity. The biopolymer extracted by using low water to seed (W/S) ratio at the low temperature under the alkaline condition showed a relatively high emulsifying activity in O/W emulsion.

Matched MeSH terms: Elasticity
Fulltext Influence of chemical extraction on rheological behavior, viscoelastic properties and functional characteristics of natural heteropolysaccharide/protein polymer from Durio zibethinus seed

Amid BT, Mirhosseini H

Int J Mol Sci, 2012 Nov 13;13(11):14871-88.
PMID: 23203099 DOI: 10.3390/ijms131114871

In recent years, the demand for a natural plant-based polymer with potential functions from plant sources has increased considerably. The main objective of the current study was to study the effect of chemical extraction conditions on the rheological and functional properties of the heteropolysaccharide/protein biopolymer from durian (Durio zibethinus) seed. The efficiency of different extraction conditions was determined by assessing the extraction yield, protein content, solubility, rheological properties and viscoelastic behavior of the natural polymer from durian seed. The present study revealed that the soaking process had a more significant (p < 0.05) effect than the decolorizing process on the rheological and functional properties of the natural polymer. The considerable changes in the rheological and functional properties of the natural polymer could be due to the significant (p < 0.05) effect of the chemical extraction variables on the protein fraction present in the molecular structure of the natural polymer from durian seed. The natural polymer from durian seed had a more elastic (or gel like) behavior compared to the viscous (liquid like) behavior at low frequency. The present study revealed that the natural heteropolysaccharide/protein polymer from durian seed had a relatively low solubility ranging from 9.1% to 36.0%. This might be due to the presence of impurities, insoluble matter and large particles present in the chemical structure of the natural polymer from durian seed.

Matched MeSH terms: Elasticity
Predicting graded young modulus values of Ti alloys modified by ion implantation

Hassan MH

Med J Malaysia, 2004 May;59 Suppl B:164-5.
PMID: 15468869

There has been, and is still, concern about the high elastic modulus of Ti alloys compared to bone. Any reduction in the Young's modulus value of the implant is expected to enhance stress redistribution to the adjacent bone tissues, minimize stress shielding and eventually prolong device lifetime. Dynamic Monte Carlo simulation is used to predict the gradual reduction in Young's modulus values between the bulk of Ti alloys and the modified surface layers due to Ca ion implantation. The simulation can be used as a screening step when applying new alloys and/or coatings.

Matched MeSH terms: Elasticity
An evaluation of the effects of handpiece speed, abrasive characteristics, and polishing load on the flexural strength of polished ceramics

Ahmad R, Morgano SM, Wu BM, Giordano RA

J Prosthet Dent, 2005 Nov;94(5):421-9.
PMID: 16275301

Many studies on the strengthening effects of grinding and polishing, as well as heat treatment on ceramics, are not well standardized or use commercially available industrial polishing systems. The reported effectiveness of these strengthening mechanisms on ceramics may not be applicable to clinical dentistry.

Matched MeSH terms: Elasticity
A hyperelastic fibre-reinforced continuum model of healing tendons with distributed collagen fibre orientations

Bajuri MN, Isaksson H, Eliasson P, Thompson MS

Biomech Model Mechanobiol, 2016 12;15(6):1457-1466.
PMID: 26951049

The healing process of ruptured tendons is problematic due to scar tissue formation and deteriorated material properties, and in some cases, it may take nearly a year to complete. Mechanical loading has been shown to positively influence tendon healing; however, the mechanisms remain unclear. Computational mechanobiology methods employed extensively to model bone healing have achieved high fidelity. This study aimed to investigate whether an established hyperelastic fibre-reinforced continuum model introduced by Gasser, Ogden and Holzapfel (GOH) can be used to capture the mechanical behaviour of the Achilles tendon under loading during discrete timepoints of the healing process and to assess the model's sensitivity to its microstructural parameters. Curve fitting of the GOH model against experimental tensile testing data of rat Achilles tendons at four timepoints during the tendon repair was used and achieved excellent fits ([Formula: see text]). A parametric sensitivity study using a three-level central composite design, which is a fractional factorial design method, showed that the collagen-fibre-related parameters in the GOH model-[Formula: see text] and [Formula: see text]-had almost equal influence on the fitting. This study demonstrates that the GOH hyperelastic fibre-reinforced model is capable of describing the mechanical behaviour of healing tendons and that further experiments should focus on establishing the structural and material parameters of collagen fibres in the healing tissue.

Matched MeSH terms: Elasticity
The elastic flap for lip repair

Goldstein MH

Plast Reconstr Surg, 1990 Mar;85(3):446-52.
PMID: 2304997

These cases illustrate a new concept in lip repair. This approach recognizes the great inherent elasticity of the oral cavity and takes advantage of the florid blood supply of the region. Recent laboratory studies of Taylor et al., as well as the works of Manchot and Salmon, are combined with anthropologic observations of tribal customs to formulate another way of looking at lip reconstruction. Triangularization of surgical defects, lip switching, and mobilization of distant flaps are avoided by taking advantage of stretched local tissues. Preoperative expansion is discussed as a future option.

Matched MeSH terms: Elasticity
Xeno-free and feeder-free culture and differentiation of human embryonic stem cells on recombinant vitronectin-grafted hydrogels

Chen LH, Sung TC, Lee HH, Higuchi A, Su HC, Lin KJ, et al.

Biomater Sci, 2019 Aug 14.
PMID: 31411209 DOI: 10.1039/c9bm00418a

Recombinant vitronectin-grafted hydrogels were developed by adjusting surface charge of the hydrogels with grafting of poly-l-lysine for optimal culture of human embryonic stem cells (hESCs) under xeno- and feeder-free culture conditions, with elasticity regulated by crosslinking time (10-30 kPa), in contrast to conventional recombinant vitronectin coating dishes, which have a fixed stiff surface (3 GPa). hESCs proliferated on the hydrogels for over 10 passages and differentiated into the cells derived from three germ layers indicating the maintenance of pluripotency. hESCs on the hydrogels differentiated into cardiomyocytes under xeno-free culture conditions with much higher efficiency (80% of cTnT+ cells) than those on conventional recombinant vitronectin or Matrigel-coating dishes just only after 12 days of induction. It is important to have an optimal design of cell culture biomaterials where biological cues (recombinant vitronectin) and physical cues (optimal elasticity) are combined for high differentiation of hESCs into specific cell lineages, such as cardiomyocytes, under xeno-free and feeder-free culture conditions.

Matched MeSH terms: Elasticity
Fulltext Current Update of Collagen Nanomaterials-Fabrication, Characterisation and Its Applications: A Review

Lo S, Fauzi MB

Pharmaceutics, 2021 Feb 28;13(3).
PMID: 33670973 DOI: 10.3390/pharmaceutics13030316

Tissue engineering technology is a promising alternative approach for improvement in health management. Biomaterials play a major role, acting as a provisional bioscaffold for tissue repair and regeneration. Collagen a widely studied natural component largely present in the extracellular matrix (ECM) of the human body. It provides mechanical stability with suitable elasticity and strength to various tissues, including skin, bone, tendon, cornea and others. Even though exogenous collagen is commonly used in bioscaffolds, largely in the medical and pharmaceutical fields, nano collagen is a relatively new material involved in nanotechnology with a plethora of unexplored potential. Nano collagen is a form of collagen reduced to a nanoparticulate size, which has its advantages over the common three-dimensional (3D) collagen design, primarily due to its nano-size contributing to a higher surface area-to-volume ratio, aiding in withstanding large loads with minimal tension. It can be produced through different approaches including the electrospinning technique to produce nano collagen fibres resembling natural ECM. Nano collagen can be applied in various medical fields involving bioscaffold insertion or fillers for wound healing improvement; skin, bone, vascular grafting, nerve tissue and articular cartilage regeneration as well as aiding in drug delivery and incorporation for cosmetic purposes.

Matched MeSH terms: Elasticity
Diagnosis and management of fatty liver

Tan PO, Mustaffa N, Tan SS, Lee YY

J R Coll Physicians Edinb, 2020 Sep;50(3):256-261.
PMID: 32936098 DOI: 10.4997/JRCPE.2020.308

Globally, the prevalence of non-alcoholic fatty liver disease (NAFLD) is increasing rapidly and constitutes a significant healthcare burden due to associated complications including hepatic (cirrhosis and hepatocellular cancer) and non-hepatic (cardiovascular deaths) disorders. It is closely linked to insulin resistance and metabolic syndrome but moderate alcohol consumption frequently coexists. Recently, genetic polymorphisms were implicated in the development of non-obese NAFLD. Apart from liver biopsy, in order to assess for steatosis, fibrosis and non-alcoholic steatohepatitis (NASH), advances in non-invasive serum tests and elastography have provided similarly accurate, more accessible and safer alternatives for risk stratification. As for treatment in 2020, weight loss and lifestyle modification remain the central strategy. Unfortunately, no pharmacological agents have been approved thus far, but there are a number of potential therapies in the pipeline for fibrosis and NASH. Treatment of underlying metabolic disorders is important. While the term NAFLD was coined in the 1980s, more recent understanding may support a change in nomenclature highlighting its strong metabolic roots.

Matched MeSH terms: Elasticity Imaging Techniques
Fulltext Association between non-alcoholic fatty liver disease evaluated by transient elastography with extracranial carotid atherosclerosis in a multiethnic Asian community

Tan EC, Tai MS, Chan WK, Mahadeva S

JGH Open, 2019 Apr;3(2):117-125.
PMID: 31061886 DOI: 10.1002/jgh3.12114

Background and Aim: There is not much data on the association between non-alcoholic fatty liver disease (NAFLD) and advanced fibrosis assessed using Fibroscan with carotid intima-media thickness (CIMT) in the general population. The objective of this study was to evaluate the association between NAFLD and advanced fibrosis, as diagnosed by Fibroscan, with an increased CIMT in the Malaysian population.
Methods: A cross-sectional study of government officers and their family members attending a health screening at a public healthcare facility was conducted. All subjects underwent clinical evaluation, biochemical testing, anthropometry, ultrasound carotid Doppler, and Fibroscan examination.
Results: Data for 251 subjects were analyzed (mean age 47.1 ± 12.4 years, 74.1% male). Prevalence of NAFLD and advanced fibrosis were 57.4 and 17.5%, respectively. Independent factors associated with NAFLD were waist circumference (odds ratio [OR] = 1.077, 95% confidence interval [CI] 1.038-1.118, P < 0.001) and serum alanine aminotransferase (ALT) (OR = 1.039, 95% CI 1.005-1.074, P = 0.024). Independent factors associated with advanced fibrosis were male gender (OR = 4.847, 95% CI 1.369-17.155, P = 0.014) and serum aspartate aminotransferase (AST) (OR = 1.057, 95% CI 1.003-1.113, P = 0.036). Prevalence of increased CIMT was 29.0%. Independent factor associated with increased CIMT was older age (OR = 1.146, 95% CI 1.067-1.231, P < 0.001). Of the subjects, 34.5% with NAFLD had increased CIMT compared to 19.1% of the subjects without NAFLD (P = 0.063). Advanced fibrosis was not associated with increased CIMT.
Conclusions: Prevalence of NAFLD, advanced liver fibrosis, and increased CIMT were high. NAFLD and advanced liver fibrosis appeared not to be associated with increased CIMT. However, a larger sample size is needed to demonstrate whether there is any association.

Matched MeSH terms: Elasticity Imaging Techniques
Fulltext Modifiable factors associated with bone health in Malaysian adolescents utilising calcaneus quantitative ultrasound

Zulfarina MS, Sharif R, Syarifah-Noratiqah SB, Sharkawi AM, Aqilah-Sm ZS, Mokhtar SA, et al.

PLoS One, 2018;13(8):e0202321.
PMID: 30106982 DOI: 10.1371/journal.pone.0202321

Maximizing bone mineral accrual to attain an optimal peak bone mass (PBM), particularly during adolescence, appears to be an effective protective strategy in the prevention of osteoporosis. This study aimed to evaluate the influence of physical activity (PA), fat mass (FM), lean mass (LM), body mass index (BMI), calcium, or combination of vitamin D supplement intake, smoking and alcohol drinking status on bone health assessed by calcaneus quantitative ultrasound (QUS) in a healthy adolescent population. The participants comprised of 920 male and female secondary school adolescents aged 15-17 years old. Quantitative ultrasound measurements of the left heel were performed using Lunar Achilles EX II, which included results of broadband ultrasound attenuation (BUA), speed of sound (SOS), and a calculated stiffness index (SI). Multivariable linear regression analyses revealed that-PA was positively associated with all three QUS indices in both genders; BMI was positively associated with SI and SOS in females; LM was positively associated with BUA in both genders; and FM was negatively associated with SI in females. These variables accounted for 32.1%, 21.2% and 29.4% of females' SOS, BUA and SI variances (p<0.001), respectively and 23.6%, 15.4% and 17.2% of males' SOS, BUA and SI variances (p<0.001), respectively. Promoting health benefits from physical activity could influence bone status and consequently improve PBM, which is a potent protective determinant against osteoporosis in adulthood.

Matched MeSH terms: Elasticity

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links