MyMedR

Displaying publications 81 - 100 of 983 in total

Abstract:

Sort:

Fulltext Structural and electrical characteristic of BA0.7SR0.3TIO3 with a secondary phase BATI2O5

Sreekantan, Srimala, Ahmad Fauzi Mohd Noor, Zainal Arifin Ahmad, Radzali Othman, West, Anthony, Sinclair, Derek

Journal of Nuclear and Related Technologies, 2007;2007(1):115-126.
MyJurnal

Barium strontium titanate (Ba0.7Sr0.3TiO3) powder was processed at temperature 80 o C by reacting titania sol in aqueous solutions that contained BaCl2, SrCl2 and NaOH at atmospheric pressure.
The structural characteristic of the powder and sintered pellet were studied using Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) whereas the electrical characteristic was determined via Impedance Spectroscopy (IS) and LCR meter. The synthesized powder was found to have a tetragonal phase after heating at 1300 o C. XRD pattern also showed the presence of secondary phase BaTi2O5 (BT2). The SEM results shows the fine grain size was in the range of 0.2 Pm to 0.4 Pm whereas the large ones are approximately 0.8 Pm to 1.2 Pm The ac response of sample sintered at 1300 o C indicated that three electrically different regions. Element 1 can be assigned as a ferroelectric grain boundary region and it is actually BT2, element 2 as a ferroelectric bulk region and the third element is a conductive core which has a low resistance (200 :) and capacitance value.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Study of anodised PM aluminium matrix composite reinforced with 15 wt % saffil™ alumina short fibre

Mohd Nazree Derman, Zainal Arifin Ahmad, Hussain, Luay Bakir, Nurulakmal Mohd Sharif

Journal of Nuclear and Related Technologies, 2007;2007(1):155-158.
MyJurnal

A study of wear behaviour on anodised PM aluminium matrix composites (AMC) reinforced with Saffil™ alumina short fibres was done. AMC was fabricated by powder metallurgy methods (PM) with using Al flake powders and Saffil™ alumina short fibres. AMC reinforced with 15 wt % Saffil¥ alumina short fibre was selected because it showed optimum mechanical and physical properties. Sulphuric acid anodising process was performed and the objective is to obtain suitable parameters of sulphuric acid concentration, anodising voltage and anodising time on MMC. The study of anodising process was carried out with various sulphuric acid concentrations (from 0 to 20 % volume), anodising voltage (10 V to 20 V) and anodising time (from 0 to 60 minutes) at room temperature. Scanning electron microscope (SEM) was used to investigate coating morphology and thickness. From the research, anodising voltage of 18 V and 15 % vol H2SO4 in anodising time of 60 minutes were suitable parameters for sulphuric acid anodising of this AMC. SEM showed the coating thickness around 20 Pm. From the reserch, it was found that H2SO4 anodising was able to give good coating to MMC.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Nano-structural study of microfibrils in Acacia Mangium wood using small- angle x-ray scattering (SAXS)

Tabet, Tamer A., Fauziah Abdul Aziz, Shahidan Radiman

Journal of Nuclear and Related Technologies, 2007;2007(1):209-216.
MyJurnal

Small-angle X-ray scattering (SAXS) was used to investigate the nanostructure of the microfibrils of cell wall in Acacia Mangium wood. Parameters, such as the fibre length (L), surface area of the single fibre (S), the correspondence distance from the center of the fibre to the center of its neighbor and the shape of the fibre were determined as a function to the distance from pith towards the bark. The results indicate that the fibre length ranged from 53.44 nm to 13.72 nm from pith to bark. Surface area of the single fibre varied from 0.65 nm 2 to 4.36 nm 2 , the highest being found at the end of bark region. The mean value of the correspondence distance is 13.95 nm. Surface structure analysis from scattering graph showed a rod shape of fibre in the pith region of Acacia Mangium wood. The use of SAXS technique and scanning electron microscope (SEM) micrographs gives the most reliable dimensions values.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Effects of j-rays on electrical conductivity of polyvinyl alcohol-polypyrrole composite polymer films

Mohd Hamzah Harun, Elias Saion, Noorhana Yahya, Anuar Kassim, Ekramul Mahmud, Muhammad Yousuf Hussain, et al.

Journal of Nuclear and Related Technologies, 2007;2005(1):1-11.
MyJurnal

The composite polymer films of polyvinyl alcohol/polypyrrole/chloral hydrate (PVA-PPy-CH) had been prepared. Effects of J-rays on the electrical conductivity of the composite polymer films had
been investigated by using Inductance Capacitance Resistance meter (LCR) meter at a frequency
ranging from 20 Hz to 1 MHz. With the incorporation of chloral hydrate in the polymer sample, the conductivity increased indicates that it is capable to be used as dopant for polymerizing conjugated polymer. The electrical conductivity obtained increased as the dose increased, which is in the order of 10-5Scm-1 indicates that J-rays is capable to enhance the electrical conductivity of the composite polymer films. The parameter of s is in the range of 0.31 d s d 0.49 and obeyed simple power law dispersion Zs. The Scanning Electron Microscopy (SEM) micrographs reveal the formation of polypyrrole globules in polyvinyl alcohol matrix which increased as the irradiation dose was increased.

Matched MeSH terms: Microscopy, Electron, Scanning
Evaluation of load at fracture of Procera AllCeram copings using different luting cements

Al-Makramani BMA, Razak AAA, Abu-Hassan MI

J Prosthodont, 2008 Feb;17(2):120-124.
PMID: 18047490 DOI: 10.1111/j.1532-849X.2007.00270.x

PURPOSE: The current study investigated the effect of different luting agents on the fracture resistance of Procera AllCeram copings.
METHODS: Six master dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Thirty copings (Procera AllCeram) of 0.6-mm thickness were manufactured. Three types of luting media were used: zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and dual-cured composite resin cement (Panavia F). Ten copings were cemented with each type. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.
RESULTS: ANOVA revealed significant differences in the load at fracture among the three groups (p < 0.001). The fracture strength results showed that the mean fracture strength of zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and resin luting cement (Panavia F) were 1091.9 N, 784.8 N, and 1953.5 N, respectively.
CONCLUSION: Different luting agents have an influence on the fracture resistance of Procera AllCeram copings.

Matched MeSH terms: Microscopy, Electron, Scanning
Analysis of SO2 sorption capacity of rice husk ash (RHA)/CaO/NaOH sorbents using response surface methodology (RSM): untreated and pretreated RHA

Dahlan I, Lee KT, Kamaruddin AH, Mohamed AR

Environ Sci Technol, 2008 Mar 01;42(5):1499-504.
PMID: 18441794

The SO2 sorption capacity (SSC) of sorbents prepared from rice husk ash (RHA) with NaOH as additive was studied in a fixed-bed reactor. The sorbents were prepared using a water hydration method by slurrying RHA, CaO, and NaOH. Response surface methodology (RSM) based on four-variable central composite face centered design (CCFCD) was employed in the synthesis of the sorbents. The correlation between the sorbent SSC (as response) with four independent sorbent preparation variables, i.e. hydration period, RHA/CaO ratio, NaOH amount, and drying temperature, were presented as empirical mathematical models. Among all the variables studied, the amount of NaOH used was found to be the most significant variable affecting the SSC of the sorbents prepared. The SSC for sorbent prepared with the addition of NaOH was found to be significantly higher than sorbents prepared without NaOH. This is probably because NaOH is a deliquescent material, and its existence increases the amount of water collected on the surface of the sorbent, a condition required for sorbent-SO2 reaction to occur at low temperature. The effect of further treatment of RHA at 600 degrees C was also investigated. Although pretreated RHA sorbents demonstrated higher SSC as compared to untreated RHA sorbents, nevertheless, at optimum conditions, sorbents prepared from untreated RHA was found to be more favorable due to practical and economic concerns.

Matched MeSH terms: Microscopy, Electron, Scanning
Image noise variance estimation using the mixed Lagrange time-delay autoregressive model

Sim KS, Tso CP, Law KK

Microsc Res Tech, 2008 Apr;71(4):315-24.
PMID: 18172898 DOI: 10.1002/jemt.20558

The mixed Lagrange time-delay estimation autoregressive (MLTDEAR) model is proposed as a solution to estimate image noise variance. The only information available to the proposed estimator is a corrupted image and the nature of additive white noise. The image autocorrelation function is calculated and used to obtain the MLTDEAR model coefficients; the relationship between the MLTDEAR and linear prediction models is utilized to estimate the model coefficients. The forward-backward prediction is then used to obtain the predictor coefficients; the MLTDEAR model coefficients and prior samples of zero-offset autocorrelation values are next used to predict the power of the noise-free image. Furthermore, the fundamental performance limit of the signal and noise estimation, as derived from the Cramer-Rao inequality, is presented.

Matched MeSH terms: Microscopy, Electron, Scanning/methods*
Preparation of activated carbon from coconut husk: optimization study on removal of 2,4,6-trichlorophenol using response surface methodology

Tan IA, Ahmad AL, Hameed BH

J Hazard Mater, 2008 May 1;153(1-2):709-17.
PMID: 17935879

Activated carbon was prepared from coconut husk using physicochemical activation method which consisted of potassium hydroxide (KOH) treatment and carbon dioxide (CO(2)) gasification. The effects of three preparation variables (CO(2) activation temperature, CO(2) activation time and KOH:char impregnation ratio) on the 2,4,6-trichlorophenol (2,4,6-TCP) uptake and activated carbon yield were investigated. Based on the central composite design, two quadratic models were developed to correlate the preparation variables to the two responses. From the analysis of variance (ANOVA), the most influential factor on each experimental design response was identified. The activated carbon preparation conditions were optimized by maximizing both the 2,4,6-TCP uptake and activated carbon yield. The predicted 2,4,6-TCP uptake and carbon yield from the models agreed satisfactorily with the experimental values. The optimum conditions for preparing activated carbon from coconut husk for adsorption of 2,4,6-TCP were found as follow: CO(2) activation temperature of 750 degrees C, CO(2) activation time of 2.29 h and KOH:char impregnation ratio of 2.91, which resulted in 191.73 mg/g of 2,4,6-TCP uptake and 20.16 % of activated carbon yield.

Matched MeSH terms: Microscopy, Electron, Scanning
New species of Cryptosporidium Tyzzer, 1907 (Apicomplexa) from amphibian host: morphology, biology and phylogeny

Jirků M, Valigurová A, Koudela B, Krízek J, Modrý D, Slapeta J

Folia Parasitol., 2008 Jun;55(2):81-94.
PMID: 18666410

Cryptosporidium fragile sp. n. (Apicomplexa) is described from black-spined toads, Duttaphrynus melanostictus (Schneider) (Amphibia, Anura, Bufonidae) from the Malay Peninsula. The parasitized animals were directly imported from Malaysia and harboured C. fragile at the time of arrival. Oocysts were subspherical to elliptical with irregular contour in optical section, measuring 6.2 (5.5-7.0) x 5.5 (5.0-6.5) microm. Oocyst wall was smooth and colourless in light microscopy. The endogenous development of C. fragile in the stomach of black-spined toad was analysed in detail using light and electron microscopy. Cryptosporidian developmental stages were confined to the surface of gastric epithelial cells. In transmission experiments, C. fragile has not been infective for one fish species, four amphibian species, one species of reptile and SCID mice. Full length small subunit rRNA gene sequence was obtained. Phylogenetic reconstruction revealed distinct status of C. fragile within the clade of species with gastric localisation including Cryptosporidium muris Tyzzer, 1907, Cryptosporidium serpentis Levine, 1980 and Cryptosporidium andersoni Lindsay, Upton, Owens, Morgan, Mead et Blagburn, 2000. Described characteristics differentiate C. fragile from the currently recognized Cryptosporidium species. Our experience with the description of C. fragile has led us to revise the recommended criteria for an introduction of a new Cryptosporidium species name. C. fragile is the first species described and named from an amphibian host. Its prevalence of 83% (15/18) in black-spined toads within the 3 months after importation calls for strict quarantine measures and import regulation for lower vertebrates.

Matched MeSH terms: Microscopy, Electron, Scanning
A revision of the family Dissonidae Kurtz, 1924 (Copepoda: Siphonostomatoida)

Boxshall GA, Lin CL, Ho JS, Ohtsuka S, Venmathi Maran BA, Justine JL

Syst Parasitol, 2008 Jun;70(2):81-106.
PMID: 18427956 DOI: 10.1007/s11230-008-9132-z

Two new species of the parasitic copepod genus Dissonus Wilson, 1906 are described: D. excavatus n. sp. from the gills of a labrid, Bodianus perditio, and a lutjanid, Macolor niger, collected off New Caledonia and Taiwan, and D. inaequalis n. sp. from a hemiscylliid elasmobranch, Chiloscyllium punctatum, collected off Sarawak (Malaysia) and the Philippines. Material of D. heronensis Kabata, 1966 is described from a balistid host, Pseudobalistes fuscus, off New Caledonia, and this constitutes a new host record for this parasite. D. manteri Kabata, 1966 was collected from four serranid host species off New Caledonia and from one of the same hosts off Taiwan. Two of the hosts from New Caledonia, Plectropomus laevis and Epinephelus cyanopodus, represent new host records. D. pastinum Deets & Dojiri, 1990 was recognised as a new synonym of D. nudiventris Kabata, 1966, so the total number of valid species is now twelve. Material from museum collections of D. nudiventris, D. similis Kabata, 1966 and D. spinifer Wilson, 1906 was re-examined and provided new information which is utilised in a key to all valid species of Dissonus.

Matched MeSH terms: Microscopy, Electron, Scanning
Adsorption of basic dye on high-surface-area activated carbon prepared from coconut husk: equilibrium, kinetic and thermodynamic studies

Tan IA, Ahmad AL, Hameed BH

J Hazard Mater, 2008 Jun 15;154(1-3):337-46.
PMID: 18035483

Adsorption isotherm and kinetics of methylene blue on activated carbon prepared from coconut husk were determined from batch tests. The effects of contact time (1-30 h), initial dye concentration (50-500 mg/l) and solution temperature (30-50 degrees C) were investigated. Equilibrium data were fitted to Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The equilibrium data were best represented by Langmuir isotherm model, showing maximum monolayer adsorption capacity of 434.78 mg/g. The kinetic data were fitted to pseudo-first-order, pseudo-second-order and intraparticle diffusion models, and was found to follow closely the pseudo-second-order kinetic model. Thermodynamic parameters such as standard enthalpy (DeltaH degrees), standard entropy (DeltaS degrees) and standard free energy (DeltaG degrees) were evaluated. The adsorption interaction was found to be exothermic in nature. Coconut husk-based activated carbon was shown to be a promising adsorbent for removal of methylene blue from aqueous solutions.

Matched MeSH terms: Microscopy, Electron, Scanning
Scanning electron microscopy of cornea re-epithelization after transplanted with bilayered corneal construct

Masrudin SS, Ghafar NA, Saidi M, Aminuddin BS, Rahmat A, Ruszymah BH, et al.

Med J Malaysia, 2008 Jul;63 Suppl A:109-10.
PMID: 19025009

The present work was to determine the development and re-epithelization of bilayered corneal construct (BCC) in vitro and in vivo using scanning electron microscopy (SEM). The in vitro BCC was transplanted to the rabbit's eye and after 90 days the BCC was harvested and analyzed. The corneas were processed for morphology studies. The result indicates that the BICC that was transplanted for 90 days showed good development and re-epithelization of epithelial layer similar to the normal cornea.

Matched MeSH terms: Microscopy, Electron, Scanning*
Cytotoxicity and scanning electron microscopy study of gentamycin-coated HA effect on biofilm

Au LF, Othman F, Mustaffa R, Vidyadaran S, Rahmat A, Besar I, et al.

Med J Malaysia, 2008 Jul;63 Suppl A:16-7.
PMID: 19024962

Biofilms are adherent, multi-layered colonies of bacteria that are typically more resistant to the host immune response and routine antibiotic therapy. HA biomaterial comprises of a single-phased hydroxyapatite scaffold with interconnected pore structure. The device is designed as osteoconductive space filler to be gently packed into bony voids or gaps following tooth extraction or any surgical procedure. Gentamycin-coated biomaterial (locally made hydroxyapatite) was evaluated to reduce or eradicate the biofilm on the implant materials. The results indicated that the HA coated with gentamycin was biocompatible to human osteoblast cell line and the biofilm has been reduced after being treated with different concentrations of gentamycin-coated hydroxyapatite (HA).

Matched MeSH terms: Microscopy, Electron, Scanning/instrumentation*; Microscopy, Electron, Scanning/methods
A scanning electron microscopic study of in vivo tissue engineered respiratory epithelium in sheep

Heikal MY, Aminuddin BS, Jeevanan J, Chen HC, Sharifah S, Ruszymah BH

Med J Malaysia, 2008 Jul;63 Suppl A:34.
PMID: 19024970

Normal tracheal mucociliary clearance is the key to maintaining the health and defense of respiratory airway. Therefore the present of cilia and mucous blanket are important for tracheal epithelium to function effectively. In the present study, we prepared a tissue engineered respiratory epithelium construct (TEREC) made of autologous respiratory epithelium cells, fibroblast and fibrin from sheep owns blood which replaced a created tracheal mucosal defect. Scanning electron microscopy (SEM) showed encouraging result where immature cilia were present on the surface of TEREC. This result indicates that engineered respiratory epithelium was able to function as normal tissue.

Matched MeSH terms: Microscopy, Electron, Scanning*
Removal of basic dye from aqueous medium using a novel agricultural waste material: pumpkin seed hull

Hameed BH, El-Khaiary MI

J Hazard Mater, 2008 Jul 15;155(3):601-9.
PMID: 18178306 DOI: 10.1016/j.jhazmat.2007.11.102

In this work, pumpkin seed hull (PSH), an agricultural solid waste, is proposed as a novel material for the removal of methylene blue (MB) from aqueous solutions. The effects of the initial concentration, agitation time and solution pH were studied in batch experiments at 30 degrees C. The equilibrium process was described well by the multilayer adsorption isotherm. The adsorption kinetics can be predicted by the pseudo-first-order and the modified pseudo-first-order models. The mechanism of adsorption was also studied. It was found that for a short time period the rate of adsorption is controlled by film diffusion. However, at longer adsorption times, pore-diffusion controls the rate of adsorption. Pore diffusion takes place in two distinct regimes, corresponding to diffusion in macro- and mesopores. The results demonstrate that the PSH is very effective in the removal of MB from aqueous solutions.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Susceptibility of selected tooth-coloured dental materials to damage by common erosive acids

Wan Bakar W, McIntyre J

Aust Dent J, 2008 Sep;53(3):226-34.
PMID: 18782366 DOI: 10.1111/j.1834-7819.2008.00053.x

Erosive substances such as gastric acids, lemon juice and even the less erosive cola drinks have been extensively investigated for their destructive effects on enamel. However, their effects on the tooth-coloured restoratives has not been widely analysed. The objective of this study was to assess their effects on the more commonly used glass containing restorative materials in vitro.

Matched MeSH terms: Microscopy, Electron, Scanning
Catalytic oxidation of butyl acetate over silver-loaded zeolites

Wong CT, Abdullah AZ, Bhatia S

J Hazard Mater, 2008 Sep 15;157(2-3):480-9.
PMID: 18294771 DOI: 10.1016/j.jhazmat.2008.01.012

The performance of silver-loaded zeolite (HY and HZSM-5) catalysts in the oxidation of butyl acetate as a model volatile organic compound (VOC) was studied. The objective was to find a catalyst with superior activity, selectivity towards deep oxidation product and stability. The catalyst activity was measured under excess oxygen condition in a packed bed reactor operated at gas hourly space velocity (GHSV)=15,000-32,000 h(-1), reaction temperature between 150 and 500 degrees C and butyl acetate inlet concentration of 1000-4000 ppm. Both AgY and AgZSM-5 catalysts exhibited high activity in the oxidation of butyl acetate. Despite lower silver content, AgY showed better activity, attributed to better metal dispersion, surface characteristics and acidity, and its pore system. Total conversion of butyl acetate was achieved at above 400 degrees C. The oxidation of butyl acetate followed a simple power law model. The reaction orders, n and m were evaluated under differential mode by varying the VOC partial pressure between 0.004 and 0.018 atm and partial pressure of oxygen between 0.05 and 0.20 atm. The reaction rate was independent of oxygen concentration and single order with respect to VOC concentration. The activation energies were 19.78 kJ/mol for AgY and 32.26 kJ/mol for AgZSM-5, respectively.

Matched MeSH terms: Microscopy, Electron, Scanning
Sorption equilibrium and kinetics of basic dye from aqueous solution using banana stalk waste

Hameed BH, Mahmoud DK, Ahmad AL

J Hazard Mater, 2008 Oct 30;158(2-3):499-506.
PMID: 18353547 DOI: 10.1016/j.jhazmat.2008.01.098

The sorption of basic dye from aqueous solutions by banana stalk waste (BSW), an abundant agricultural waste in Malaysia, was studied in a batch system with respect to pH and initial dye concentration. Sorption isotherm of methylene blue (MB) onto the BSW was determined at 30 degrees C with the initial concentrations of MB in the range of 50-500 mg/L. At pH 2.0, the sorption of dye was not favorable, while the sorption at other pHs (4.0-12.0) was remarkable. Equilibrium data were fitted to the Langmuir, Freundlich and Temkin isotherm models. The equilibrium data were best represented by the Langmuir isotherm model, with maximum monolayer adsorption capacity of 243.90 mg/g. The sorption kinetic data were analyzed using pseudo-first-order, pseudo-second-order and intraparticle diffusion models. It was found that the pseudo-second-order kinetic model was the best applicable model to describe the sorption kinetics. The results showed that BSW sorbent was a promising for the removal of MB from aqueous solutions.

Matched MeSH terms: Microscopy, Electron, Scanning
Dual modification of starch via partial enzymatic hydrolysis in the granular state and subsequent hydroxypropylation

Karim AA, Sufha EH, Zaidul IS

J Agric Food Chem, 2008 Nov 26;56(22):10901-7.
PMID: 18975963 DOI: 10.1021/jf8015442

The effect of enzymatic pretreatment on the degree of corn and mung bean starch derivatization by propylene oxide was investigated. The starch was enzymatically treated in the granular state with a mixture of fungal alpha-amylase and glucoamylase at 35 degrees C for 16 h and then chemically modified to produce enzyme-hydrolyzed-hydroxypropyl (HP) starch. Partial enzyme hydrolysis of starch in the granular state appeared to enhance the subsequent hydroxypropylation, as judged from the significant increase in the molar substitution. A variable degree of granule modification was obtained after enzyme hydrolysis, and one of the determinants of the modification degree appeared to be the presence of natural pores in the granules. Enzyme-hydrolyzed-HP starch exhibited significantly different functional properties compared to hydroxypropyl starch prepared from untreated (native) starch. It is evident that the dual modification of starch using this approach provides a range of functional properties that can be customized for specific applications.

Matched MeSH terms: Microscopy, Electron, Scanning
Phenotypic and genotypic characterisation of Blastocystis hominis isolates implicates subtype 3 as a subtype with pathogenic potential

Tan TC, Suresh KG, Smith HV

Parasitol Res, 2008 Dec;104(1):85-93.
PMID: 18795333 DOI: 10.1007/s00436-008-1163-5

Despite frequent reports on the presence of Blastocystis hominis in human intestinal tract, its pathogenicity remains a matter of intense debate. These discrepancies may be due to the varying pathogenic potential or virulence of the isolates studied. The present study represents the first to investigate both phenotypic and genotypic characteristics of B. hominis obtained from symptomatic and asymptomatic individuals. Symptomatic isolates had a significantly greater size range and lower growth rate in Jones' medium than asymptomatic isolates. The parasite cells of symptomatic isolates exhibited rougher surface topography and greater binding affinity to Canavalia ensiformis (ConA) and Helix pomatia (HPA). The present study also identifies further phenotypic characteristics, which aided in differentiating the pathogenic forms from the non-pathogenic forms of B. hominis. Blastocystis subtype 3 was found to be correlated well with the disease.

Matched MeSH terms: Microscopy, Electron, Scanning

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links