Displaying publications 81 - 100 of 150 in total

Abstract:
Sort:
  1. Khamis, N.K., Deros, B.M., Ismail, F.R., Tahir, N.H.M.
    MyJurnal
    Motorcyclists are particularly vulnerable when compared to large vehicles on the road. This study was conducted to gather feedbacks from motorcycle deliveryman regarding their riding conditions. A self-rated questionnaire was used to determine prevalence of riding symptom and its association with Whole Body Vibration and other associated factors among motorcycle deliveryman in Malaysia. A set of questionnaire was developed, pilot tested for its reliability and validity and distributed to 100 respondents. An interview was conducted after gathering the data from the respondents through the questionnaire. Survey findings show majority of the respondents preferred to ride according to the standard riding posture. Large majority of them agreed handlebar and foot peg/rest exposed them directly to the vibration. In addition, majority of them felt discomfort at the lower back and felt fatigue after long hours of riding. These findings are in-line with past studies regarding the road users.
    Matched MeSH terms: Posture
  2. Kabilmiharbi, N, Selamat, F.E
    MyJurnal
    Manual workers in plastics industry are often exposed to work related discomfort and pain while performing their daily
    task. These exposure leads to common occupational diseases such as Work-related Musculoskeletal Disorder (WMSD) or
    low back pain (LBP) which in turn will affect their working performance. The main objective for this study is to
    analyse the working posture of a manual worker that works in a polypropylene fibrillated yarn industry using RULA
    assessment in CATIA P3 V5R14 software. The subject were selected from the packaging area as the manual handling
    work are only present in that area. Based on the RULA analysis done by constructing the worker posture in the
    software, several awkward postures were identified to be high in risk factors. The postures that is high in risk is
    postures 3 which is due to lifting heavy loads and twisting or turning of the trunk. The postures obtained the final
    RULA analysis score of 7 and this indicates that changes must be done immediately. It is recommended that the
    company should increase the ergonomic awareness among the manual workers especially while performing their work
    and to redesign the working posture for the manual workers.
    Matched MeSH terms: Posture
  3. Ezrin Hani Sukadarin, Baba Md Deros, Jaharah A. Ghani, Ahmad Rasdan Ismail, Nur Syazwani Mohd Nawi, Norhidayah Abdull
    MyJurnal
    Validity test is important during the development of ergonomics measurement. Failure to conduct validity tests will result in the measurement method being developed to be incapable of providing reliable ergonomics measurements. The objective of this study is to conduct validity test on the simple method ergonomics measurement which was developed. The method named Simple Ergonomics Risks Assessment (SERA). Content validity test and criterion validity test were conducted. The content validity test consists of 6 ergonomics experts who actively provide inputs and positive feedbacks to improve the measurement method being developed. Meanwhile, the criterion validity test involves data collection of complaints on body parts among oil palm workers which were derived from Nordic Musculoskeletal Questionnaire (NMQ) and ergonomics risk assessment scores obtained from SERA. Both findings were tested with the Chi-square test to explore possible relations between the two findings. Results from the test conducted showed that there are significant relations in the scores of neck posture; hip, right and left shoulder, right and left wrists and the right hand associated with fresh fruit bunch (FFB) harvesting activities. In the loose fruits collection, the Chi-square test showed significant relations in the scores of neck posture, hip, right and left shoulders, right wrist, right arm and the left hand. However, there are body parts such as the legs which showed no significant relation. More tests should be conducted to further explore the validity of the method being developed. Findings from both validity tests show that SERA were verified by the experts and tested with validated method so that it is valid to be applied in the future.
    Matched MeSH terms: Posture
  4. Mirta Widia, Siti Zawiah Md Dawal, Nukman Yusoff
    MyJurnal
    Most studies have examined the association of ergonomic risk factors and musculoskeletal discomfort in developed countries. Meanwhile the data are still lacking in developing countries such as Malaysia. The aim of this study was to determine the relation between risk factors and musculoskeletal discomfort among manual material handling workers in Malaysian automotive industries. A total of211 manual material handling workers from automotive industries completed a set of questionnaire on the individual, physical and environmental factors and the prevalence of musculoskeletal discomfort. The Chi-Square test and logistics regression analysis were used to determine the relationship of the risk factors and musculoskeletal. The findings highlighted that job tenure was significantly correlated with musculoskeletal discomfort among the workers (OR=2.33-5.56). The most significant physical risk factor that was associated with musculoskeletal discomfort was bending the trunk forward slightly, hands above knee level, which was significantly related to lower back discomfort (OR=5.13, 95%CI=1.56-16.8), thigh discomfort (OR=5.1, 95%CI=1.01-25.53) and wrist discomfort (OR=3.65, 95%CI=1.06-12.53). Twisting of the trunk (over 45o) and bending sideways were significantly associated to lower back discomfort (OR=4.04, 95%CI=1.44-14.44), and thigh discomfort (OR=4.3, 95%CI=1.29-8.50). The findings also highlighted that environmental factors was associated with musculoskeletal discomfort (p < 0.05. Musculoskeletal discomfort can be reduced by lowering work-related risk factors among automotive manual material handling workers, particularly by focusing on significant factors, including job tenure, bending or twisting postures and environmental factors.
    Matched MeSH terms: Posture
  5. Darliana Mohamad, Dian Darina Indah Daruis, Baba Md Deros, Ahmad Rasdan Ismail
    MyJurnal
    Drivers’ posture is one of the factors that can contribute to driving discomfort. Subjective evaluation is needed in determining the driving discomfort problem. The purpose of this study is to examine the reliability of different driving postures that may lead to drivers’ discomfort. A total of thirty-four healthy Malaysian drivers were involved in this study. Respondents were required to sit on the driver’s seat with the required adjustments of three different postures and fill-in the given subjective evaluation form. The same procedure was repeated for each respondent after three days for purpose of conducting test retest evaluation. The reliability statistical analysis result shows the study was reliable and valid with a Cronbach’s alpha coefficient equal to 0.827. The comparison means that ANOVA analysis also shows significance difference between these three groups of postures for all measured parameters. In conclusion, the result from this study shows the subjective evaluation conducted is reliable and can be used for drivers’ posture discomfort study.
    Matched MeSH terms: Posture
  6. Deros, B.M., Daruis, D.D.I., Ghani, J.A., Saleh, C., Wazir, R.M., Yasim, M.K., et al.
    MyJurnal
    This An Ergonomic hazard often exists in any industry. However, majority of the employees are not aware of practicing good body posture until the MSDs symptoms become permanent and chronic. The main objective of this study is to determine the manual handling problems among workers at an electronic component manufacturing company. The scope of this study focused on the study entire body disorders among workers on electronic manufacturing company using the Rapid Entire Body Assessment (REBA). A cross sectional study involving observation of the workplace, the work task and the working environment, photographs and videos taken during the observation. Later, a survey questionnaire was given to the respondents to obtain their socio-demography information, work activity and health problems. Rapid Entire Body Assessment (REBA) was conducted on all respondents to determined REBA scores in different work positions. The study was conducted at an electronic component manufacturing company located in Klang Valley, Selangor. A total of 124 workers were surveyed and REBA assessment was performed on 20 workers at Company X production area. It includes 5 categories of position at Company X, such as:loading steel bar into casing; pushing the steel bar, turning movement while adjusting the steel bar, adjusting steel bar into the loading area, unloading steel bar from casing into the machine. The study found that turning section has the highest MSDs problems regarding manual handling because majority of the respondents in the turning department felt the pain while performing their work. This is due to their job demand, which they need to handle with tools weighing from 200 to 400 kg. The REBA scores showed that17 out of 20 respondents performing turning operations, moving and pushing the steel bar recorded the highest score of 11 or more which are categorize in the very high risk group. The position of pushing and turning steel bar while moving the steel bar has higher risk that contributed to the ergonomics risk factor, which in-turn can contribute to Muscular Skeletal Disorders (MSDs). More detailed investigation and remedial measures should be taken immediately, especially for the workers performing the manual handlings activities.
    Matched MeSH terms: Posture
  7. Tamara Gien Pooke, Rozi Mahmud, Suraini Mohamad Saini, Yap, Poh Sin, Sharifah Roohi Syed Waseem Ahmad, Harwant Singh
    MyJurnal
    Introduction: The goal of this study was to assess the effectiveness of seated combined extension-compression and transverse load (ECTL) traction as a new method for increasing a reduced lordosis of less than 30 degrees in a Malaysian population between the ages of 18 and 60 years. Possible changes in disc height were measured in accordance with the underlying theoretical framework, that suggests the anterior cervical structures would elongate due to creep over the fulcrum of the traction device.
    Method: This was a single centre, randomised, blinded controlled clinical trial with parallel groups, used to test the superiority of the seated combined ECTL traction together with physiotherapy exercises when compared with the same physiotherapy exercises used as a control. Fifty randomly allocated subjects who completed the forty treatments over the fourteen weeks were analysed using non-parametric tests for changes in outcomes.
    Results: There were no significant changes in outcomes for disc height changes seen in this study. The findings of a greater overall increase in posterior disc height changes compared with anterior disc height changes were in contrast with the proposed underlying theoretical framework for this type of ECTL traction. The greater height changes occurring in the control group were also unexpected.
    Conclusion: The findings in this study of the contrasting changes in disc height of greater posterior than anterior height changes, question the underlying theoretical framework as postulated for this type of traction.
    Matched MeSH terms: Posture
  8. Adeyemi AJ, Rohani JM, Abdul Rani MR
    Appl Ergon, 2017 Jan;58:573-582.
    PMID: 27132042 DOI: 10.1016/j.apergo.2016.04.009
    The study analysed backpack-related back pain in school children by investigating the possibility of multiple interactions among causative factors, which may be responsible for the non-conclusive findings on the issue. Using data from 444 prepubescent schoolchildren, a mixed method design combining survey, observation and direct measurement strategies was implemented. Using a multivariate structural equation modelling approach, the study investigated interactions among anthropometry, posture, backpack volume, rating and back pain constructs, with each construct made of 2-4 indicators. Additionally, regression analysis was used to determine the feasibility of considering the two additional factors of age and body mass index along with the globally accepted recommendation of a load of 10-15% of body weight. Our model demonstrated an acceptable model fit and revealed direct and indirect effects of the factors. Obese children were recommended to carry a one-third lighter load than other children. The application of systematic/multiple strategies provided an explanation for some of the issues associated with school children's backpack-related back pain.
    Matched MeSH terms: Posture
  9. Wafa SW, Aziz NN, Shahril MR, Halib H, Rahim M, Janssen X
    J Trop Pediatr, 2017 04 01;63(2):98-103.
    PMID: 27539845 DOI: 10.1093/tropej/fmw052
    This study describes the patterns of objectively measured sitting, standing and stepping in obese children using the activPALTM and highlights possible differences in sedentary levels and patterns during weekdays and weekends. Sixty-five obese children, aged 9-11 years, were recruited from primary schools in Terengganu, Malaysia. Sitting, standing and stepping were objectively measured using an activPALTM accelerometer over a period of 4-7 days. Obese children spent an average of 69.6% of their day sitting/lying, 19.1% standing and 11.3% stepping. Weekdays and weekends differed significantly in total time spent sitting/lying, standing, stepping, step count, number of sedentary bouts and length of sedentary bouts (p < 0.05, respectively). Obese children spent a large proportion of their time sedentarily, and they spent more time sedentarily during weekends compared with weekdays. This study on sedentary behaviour patterns presents valuable information for designing and implementing strategies to decrease sedentary time among obese children, particularly during weekends.
    Matched MeSH terms: Posture
  10. Maakip I, Keegel T, Oakman J
    Appl Ergon, 2017 Apr;60:52-57.
    PMID: 28166899 DOI: 10.1016/j.apergo.2016.11.004
    Prevalence and predictors associated with musculoskeletal disorders (MSDs) vary considerably between countries. It is plausible that socio-cultural contexts may contribute to these differences. We conducted a cross-sectional survey with 1184 Malaysian and Australian office workers with the aim to examine predictors associated with MSD discomfort. The 6-month period prevalence of self-reported MSD discomfort for Malaysian office workers was 92.8% and 71.2% among Australian workers. In Malaysia, a model regressing level of musculoskeletal discomfort against possible risk factors was significant overall (F [6, 370] = 17.35; p 
    Matched MeSH terms: Posture
  11. Goh CH, Ng SC, Kamaruzzaman SB, Chin AV, Tan MP
    Medicine (Baltimore), 2017 Oct;96(42):e8193.
    PMID: 29049203 DOI: 10.1097/MD.0000000000008193
    The aim of this study was to determine the relationship between falls and beat-to-beat blood pressure (BP) variability.Continuous noninvasive BP measurement is as accurate as invasive techniques. We evaluated beat-to-beat supine and standing BP variability (BPV) using time and frequency domain analysis from noninvasive continuous BP recordings.A total of 1218 older adults were selected. Continuous BP recordings obtained were analyzed to determine standard deviation (SD) and root mean square of real variability (RMSRV) for time domain BPV and fast-Fourier transform low frequency (LF), high frequency (HF), total power spectral density (PSD), and LF:HF ratio for frequency domain BPV.Comparisons were performed between 256 (21%) individuals with at least 1 fall in the past 12 months and nonfallers. Fallers were significantly older (P = .007), more likely to be female (P = .006), and required a longer time to complete the Timed-Up and Go test (TUG) and frailty walk test (P ≤ .001). Standing systolic BPV (SBPV) was significantly lower in fallers compared to nonfallers (SBPV-SD, P = .016; SBPV-RMSRV, P = .033; SBPV-LF, P = .003; SBPV-total PSD, P = .012). Nonfallers had significantly higher supine to standing ratio (SSR) for SBPV-SD, SBPV-RMSRV, and SBPV-total PSD (P = .017, P = .013, and P = .009). In multivariate analyses, standing BPV remained significantly lower in fallers compared to nonfallers after adjustment for age, sex, diabetes, frailty walk, and supine systolic BP. The reduction in frequency-domain SSR among fallers was attenuated by supine systolic BP, TUG, and frailty walk.In conclusion, reduced beat-to-beat BPV while standing is independently associated with increased risk of falls. Changes between supine and standing BPV are confounded by supine BP and walking speed.
    Matched MeSH terms: Posture/physiology*
  12. Williams DP, Jarczok MN, Ellis RJ, Hillecke TK, Thayer JF, Koenig J
    Clin Physiol Funct Imaging, 2017 Nov;37(6):776-781.
    PMID: 26815165 DOI: 10.1111/cpf.12321
    Recently, research has validated the use of Polar® heart rate monitors as a tool to index heart rate variability (HRV). In the current investigation, we sought to evaluate the test-retest reliability of both time and frequency domain measures of HRV using the Polar® RS800CX™ . Continuous HRV data were collected as 60 nominally healthy adults underwent a resting and orthostatic stress test. We evaluated reproducibility by means of the interclass correlation coefficient for absolute agreement and consistency, and the standard error of measurement. We found moderate reliable 2-week test-retest reliability of HRV using the Polar® RS800CX™ , results that are in line with previous studies that have validated the stability of HRV using other methods of measurement (e.g. electrocardiogram). Additionally, when examining different methods of spectral density estimation, we found that using the auto-regressive transformation method provides the most stable indices of HRV. Taken together, our results suggest that the Polar® RS800CX™ is not only a valid method to record HRV, but also a reliable one, particularly when using the auto-regressive transformation method.
    Matched MeSH terms: Posture*
  13. Uijtdewilligen L, Yin JD, van der Ploeg HP, Müller-Riemenschneider F
    Int J Behav Nutr Phys Act, 2017 Dec 13;14(1):169.
    PMID: 29237471 DOI: 10.1186/s12966-017-0626-4
    BACKGROUND: Evidence on the health risks of sitting is accumulating. However, research identifying factors influencing sitting time in adults is limited, especially in Asian populations. This study aimed to identify socio-demographic and lifestyle correlates of occupational, leisure and total sitting time in a sample of Singapore working adults.

    METHODS: Data were collected between 2004 and 2010 from participants of the Singapore Multi Ethnic Cohort (MEC). Medical exclusion criteria for cohort participation were cancer, heart disease, stroke, renal failure and serious mental illness. Participants who were not working over the past 12 months and without data on sitting time were excluded from the analyses. Multivariable regression analyses were used to examine cross-sectional associations of self-reported age, gender, ethnicity, marital status, education, smoking, caloric intake and moderate-to-vigorous leisure time physical activity (LTPA) with self-reported occupational, leisure and total sitting time. Correlates were also studied separately for Chinese, Malays and Indians.

    RESULTS: The final sample comprised 9384 participants (54.8% male): 50.5% were Chinese, 24.0% Malay, and 25.5% Indian. For the total sample, mean occupational sitting time was 2.71 h/day, mean leisure sitting time was 2.77 h/day and mean total sitting time was 5.48 h/day. Sitting time in all domains was highest among Chinese. Age, gender, education, and caloric intake were associated with higher occupational sitting time, while ethnicity, marital status and smoking were associated with lower occupational sitting time. Marital status, smoking, caloric intake and LTPA were associated with higher leisure sitting time, while age, gender and ethnicity were associated with lower leisure sitting time. Gender, marital status, education, caloric intake and LTPA were associated with higher total sitting time, while ethnicity was associated with lower total sitting time. Stratified analyses revealed different associations within sitting domains for Indians compared to Chinese and Malays.

    CONCLUSION: Our findings highlight the need to focus on separate domains of sitting (occupational, leisure or total) when identifying which factors determine this behavior, and that the content of intervention programs should be tailored to domain-specific sitting rather than to sitting in general. Finally, our study showed ethnic differences and therefore we recommend to culturally target interventions.

    Matched MeSH terms: Posture*
  14. Firdaus Sukarman, Mohd Ghazali Mohd Hamami, Mazleenda Mazni, Muhammad Amir Mat Shah, Ahmad Faidzal Khodori
    MyJurnal
    The utilization of parallelogram structure in a small-sized humanoid robot consists of two parallel platforms that are linked serially in each leg. The thigh and shank of each leg consists of two servomotors as actuator and linked in parallel platform. By using parallel mechanism in leg structure, foot sole surface is always parallel to the walking surface at any point. Even it looks unnatural to human-like walking motion, the expected result is the robot can maintain it posture while walking and at the point foot sole touch the walking surface, unnecessary vibrates can be modulated at the certain level to remain its balance. The effectiveness and the performance of the proposed parallel platforms are experimented by using zero moment point (ZMP) method by taking various scenario data from pressure sensors attached at the footsole. Planned walking gait is introduced to be identical in terms of foot steps length and width of each leg swing. As the results, in terms of load in each actuator, required torque at servomotors can be reduced because two servomotors are used simultaneously in one parallel system. Stable walking gait can be predicted as the quantity of error falls within the error ranges from the published walking gait patterns.
    Matched MeSH terms: Posture
  15. Sadeghi H, Hakim MN, Hamid TA, Amri SB, Razeghi M, Farazdaghi M, et al.
    Arch Gerontol Geriatr, 2017 Mar-Apr;69:144-150.
    PMID: 27923177 DOI: 10.1016/j.archger.2016.11.009
    BACKGROUND: Proprioception is the ability to sense the body position, muscle sense, joint stability and posture. As balance decreases during the process of aging, knee proprioception has a critical role in body balance and daily activities. Exergaming has shown to be a potentially effective and more enjoyable form of exercise delivery.

    OBJECTIVE: The purpose of this study was to determine the effect of an 8-week Xbox Kinect exercise program on knee proprioception in healthy older adults.

    METHODOLOGY: Thirty-two elderly men who were 65 years of age or older were randomly allocated to either a control or experimental group (allocation ratio 1:1). The experimental group received an exergame intervention that included Xbox Kinect with games focusing on movements of the knee joint for 8 weeks (three times per week and 40min per sessions). A Biodex Isokinetic Dynamometer was used to measure knee joint position sense before and after the exercise program.

    RESULTS: After eight weeks of training, knee proprioception significantly improved in the intervention group for several knee joint angles: 30° (3.5±1.1), 45° (3.1±0.9), and 60° (3.0±0.6) compared to the control group 30° (5.2±0.8), 45° (5.2±0.8), and 60° (6.2±0.9) (dominant leg F1, 28=23.469, p=0.001. ƞ2=0.456; non-dominant leg F1, 28=23.076, p=0.001. ƞ2=0.452).

    CONCLUSION: The results from this study indicate that exergame intervention can enhance knee proprioception in elderly men.
    Matched MeSH terms: Posture/physiology*
  16. Lim, Jac Fang, Richard Avoi, Noraziah Bakri, Leonard Masudal, Iskandar Nonche, Adrian Joseph, et al.
    MyJurnal
    The low back is usually associated with the lumbar spine which supports the entire weight of the upper body and significantly, is vital to the body mobility. Injury to the surrounding soft tissues can cause mild to debilitating symptoms due to muscle strain and ligament sprain. The causes of injury to the lower back are probably due to sudden twisting movement, poor posture position at work and manual handling of heavy objects or with twisting or bending movements while lifting. An Ergonomic Risk Assessment was carried out on a dental laboratory worker who complained of unresolved low back ache after a year on treatment and follow up at the outpatient department of a health clinic. From the various investigative methods used, it was found that the worker in question was placed in a situation that will over time encourage her to develop musculoskeletal disease. Our recommendations for change include immediate awareness and training in ergonomic principles of work and to report all cases so that appropriate action can be taken, reassess the workstation and environment of work, job enrichment, and creating a conducive environment for work. Once the changes have been implemented, a review will be necessary in three months time.
    Matched MeSH terms: Posture
  17. Skowron Volponi MA, Volponi P
    Zookeys, 2017.
    PMID: 29133989 DOI: 10.3897/zookeys.692.13587
    A new species of clearwing moth,Pyrophleps ellawiSkowron Volponi,sp. n., is described from Peninsular Malaysia. Information on the habitat, time and conditions of occurrence, flight and mud-puddling behaviour, functional morphology, and DNA barcode are also provided. Photographs and a supplementary video from the wild demonstrate the postures and behaviour of this species ofPyrophleps, whose remaining members were described only on the basis of pinned specimens. This is the first record of this genus in Peninsular Malaysia.
    Matched MeSH terms: Posture
  18. Madhwani KP, Nag PK
    Indian J Occup Environ Med, 2017 Jan-Apr;21(1):18-22.
    PMID: 29391743 DOI: 10.4103/ijoem.IJOEM_145_17
    Aims: The purpose of this study was to evaluate web-based Knowledge, Attitude and Practice (KAP) intervention on office ergonomics - a unique method for prevention of musculoskeletal discomfort (MSD) - in corporate offices that influences behavior modification.

    Background: With the increasing use of computers, laptops and hand-held communication devices globally among office employees, creating awareness on office ergonomics has become a top priority. Emphasis needs to be given on maintaining ideal work postures, ergonomic arrangement of workstations, optimizing chair functions, as well as performing desk stretches to reduce MSD arising from the use of these equipment, thereby promoting safe work practices at offices and home, as in the current scenario many employees work from home with flexible work hours. Hence, this justifies the importance of our study.

    Objective: To promote safe working by exploring cost-effective communication methods to achieve behavior change at distant sites when an on-site visit may not be feasible.

    Materials and Methods: An invitation was sent by the Medical and Occupational Health Team of a multinational corporation to all employees at their offices in Sri Lanka, Singapore, and Malaysia to take up an online Nordic questionnaire, a screening tool for musculoskeletal symptoms, shared in local languages on two occasions - baseline evaluation (n = 240) and a follow-up evaluation after 3 months (n = 203). After completing the baseline questionnaire, employees were immediately trained on correct postures and office ergonomics with animation graphics. The same questionnaire was sent again after a 12-week gap only to those employees who responded to the baseline questionnaire on initial assessment.

    Statistical Analysis Used: Data collected were analyzed using the Statistical Package for the Social Sciences (SPSS) version 20.0 software and variables were compared using odds ratio as well as Chi-square test.

    Results: Of the 203 employees who responded, 47.35% had some musculoskeletal symptoms. Among them 58.7% had lower back pain, 46.9% had upper back pain, 44.1% had wrist pain, 39.5% had shoulder pain, and 37% had knee pain. The percentages are high as some participants had multiple complaints i.e. 2 or 3 complaints. However, only 40% of these employees had ongoing symptoms at the time of evaluation (past 7 days). A subsequent 3-month evaluation after web-based intervention showed a significant 41-50% decline in ongoing symptoms.

    Conclusions: We conclude that newer technology using web-based animation graphics is a highly efficient technique to create office ergonomics awareness and has the potential to become a best practice in countries where language is a communication barrier and an on-site visit may not be feasible due to meagre resources.
    Matched MeSH terms: Posture
  19. Madhwani KP, Nag PK
    Indian J Occup Environ Med, 2017 May-Aug;21(2):77-83.
    PMID: 29540968 DOI: 10.4103/ijoem.IJOEM_151_17
    Background: Use of laptops and hand-held devices increase the risk of musculoskeletal disorders (MSDs). More time spent on this activity adopting faulty postures, higher the risk of developing such injuries. This study addresses training on office ergonomics with emphasis on sustainable behavior change among employees to work in safe postures, as this is a top priority in the corporate environment, today.

    Aim: To explore training intervention methods that ensure wider coverage of awareness on office ergonomics, thereby promoting safer working and suggesting sustainable programs for behavior change and job enrichment.

    Materials and Methods: A cross-sectional study was conducted (2012 - 2017), encompassing corporate office employees of multinational corporations selected from India, Dubai (U.A.E), Nairobi (East Africa), Durban (South Africa), South East Asian countries (Philippines, Vietnam, Indonesia, Singapore, Malaysia, Thailand and Sri Lanka).Participant employees (n= 3503) were divided into two groups to study the effect of interventions'; i.e., (a) deep training: 40 minute lecture by the investigator with a power point presentation (n= 1765) using a mock workstation and (b) quick training: live demonstrations of 10 minutes (n= 1738) using a live workstation.

    Results: While deep training enhanced awareness in 95.51% and quick training in 96.59% globally, the latterwas much appreciated and educated maximum employees. From statistical analysis, quick training was found superior in providing comprehensive training and influencing behavior modification in India, but all over the world it was found highly superior in knowledge enlargement, skills enrichment in addition to providing comprehensive training (P< 0.05). In countries, located to West of India, it significantly influenced behavior modification.

    Conclusion: As because few employees attend deep training lectures, the quick 10-minute program is highly promising as it is practical, replicable, yields increased awareness with wider employee coverage in a much shorter time, instilling a feeling of caring and confidence amongst them towards a robust office ergonomics program. This could lead to propose as a best practice for corporate offices globally.
    Matched MeSH terms: Posture
  20. Singh OP, Howe TA, Malarvili MB
    J Breath Res, 2018 01 04;12(2):026003.
    PMID: 28928295 DOI: 10.1088/1752-7163/aa8dbd
    The development of a human respiration carbon dioxide (CO2) measurement device to evaluate cardiorespiratory status inside and outside a hospital setting has proven to be a challenging area of research over the few last decades. Hence, we report a real-time, user operable CO2 measurement device using an infrared CO2 sensor (Arduino Mega2560) and a thin film transistor (TFT, 3.5″), incorporated with low pass (cut-off frequency, 10 Hz) and moving average (span, 8) filters. The proposed device measures features such as partial end-tidal carbon dioxide (EtCO2), respiratory rate (RR), inspired carbon dioxide (ICO2), and a newly proposed feature-Hjorth activity-that annotates data with the date and time from a real-time clock, and is stored onto a secure digital (SD) card. Further, it was tested on 22 healthy subjects and the performance (reliability, validity and relationship) of each feature was established using (1) an intraclass correlation coefficient (ICC), (2) standard error measurement (SEM), (3) smallest detectable difference (SDD), (4) Bland-Altman plot, and (5) Pearson's correlation (r). The SEM, SDD, and ICC values for inter- and intra-rater reliability were less than 5% and more than 0.8, respectively. Further, the Bland-Altman plot demonstrates that mean differences ± standard deviations for a set limit were 0.30 ± 0.77 mmHg, -0.34 ± 1.41 mmHg and 0.21 ± 0.64 breath per minute (bpm) for CO2, EtCO2 and RR. The findings revealed that the developed device is highly reliable, providing valid measurements for CO2, EtCO2, ICO2 and RR, and can be used in clinical settings for cardiorespiratory assessment. This research also demonstrates that EtCO2 and RR (r, -0.696) are negatively correlated while EtCO2 and activity (r, 0.846) are positively correlated. Thus, simultaneous measurement of these features may possibly assist physicians in understanding the subject's cardiopulmonary status. In future, the proposed device will be tested with asthmatic patients for use as an early screening tool outside a hospital setting.
    Matched MeSH terms: Posture
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links