MyMedR

Displaying publications 81 - 100 of 754 in total

Abstract:

Sort:

Public Knowledge, Attitude, and Perception Toward Conventional and Novel Ocular Treatment in Malaysia

Abdullah SN, Mohmad Sabere AS

J Pharm Bioallied Sci, 2020 12 21;13(1):143-147.
PMID: 34084061 DOI: 10.4103/jpbs.JPBS_463_20

One of the major concerns in any pharmacological treatment is the patients' adherence to medication. However, different types of ocular dosage forms might result in different response and compliance from the patients. This study investigated and compared public willingness on different types of dosage forms available for ocular treatment. The study also evaluated their willingness on new approach for the treatment based on their knowledge, attitude, and perception. This study was conducted between October and December 2017 through a set of questionnaires applied to 90 respondents between the age of 18 and 60 years who lived in Muar and Kuantan, Malaysia. The results were analyzed using SPSS software version 22.0 including inferential and descriptive statistics. There was no significant difference in the knowledge level between all age groups towards different types of dosage forms available; eye drops (P = 0.09), eye ointment (P = 0.252), medicated contact lens (P = 0.05), ocular mini-tablets (P = 0.06), and ocular inserts (P = 0.075). There is a variation of results among the public towards different types of dosage forms with their willingness to try conventional and novel approach. Eye drops show the highest willingness followed by eye ointment (less willingness). However, most of them showed no willingness towards medicated contact lens, ocular mini-tablets, and ocular insert. This research hopes to provide an overview on the development process of new formulation and dosage forms based on the patients' willingness level in an attempt to increase patient compliance.

Matched MeSH terms: Software
Fulltext Metagenomic data of bacterial community from different land uses at the river basin, Kelantan

Rupert R, Lie GJCW, John DV, Annammala KV, Jani J, Rodrigues KF

Data Brief, 2020 Dec;33:106351.
PMID: 33072827 DOI: 10.1016/j.dib.2020.106351

The data provided in the article includes the sequence of bacterial 16S rRNA gene from a high conservation value forest, logged forest, rubber plantation and oil palm plantation collected at Kelantan river basin. The logged forest area was previously notified as a flooding region. The total gDNA of bacterial community was amplified via polymerase chain reaction at V3-V4 regions using a pair of specific universal primer. Amplicons were sequenced on Illumina HiSeq paired-end platform to generate 250 bp paired-end raw reads. Several bioinformatics tools such as FLASH, QIIME and UPARSE were used to process the reads generated for OTU analysis. Meanwhile, R&D software was used to construct the taxonomy tree for all samples. Raw data files are available at the Sequence Read Archive (SRA), NCBI and data information can be found at the BioProject and BioSample, NCBI. The data shows the comparison of bacterial community between the natural forest and different land uses.

Matched MeSH terms: Software
Fulltext Data on technopreneurial intention among male and female university students: A comparison

Koe WL

Data Brief, 2020 Dec;33:106423.
PMID: 33102642 DOI: 10.1016/j.dib.2020.106423

The data presented were used to examine the level of technopreneurial intention and differences in intention between male and female university students. A total of 361 final-year students from a public university in Malaysia have participated in the data collection process through answering online questionnaire. The respondents were selected by using proportionate stratified sampling. Quantitative method was employed in data analysis process. Specifically, the software of IBM SPSS was used to perform descriptive analysis and independent sample t-test. Data have also been tested for internal consistency to ensure their reliability. Mean and standard deviation values for male and female student's technopreneurial intention were presented. In comparison, the data demonstrated that no difference existed between male and female student's technopreneurial intention. The data provided new information on university student's level of technopreneurial intention. It was useful for higher learning institutions and governmental agencies in designing technopreneurship development programs, particularly in the era of post-COVID19 pandemic which requires extensive use of technology in entrepreneurship.

Matched MeSH terms: Software
Identification of reference genes for real-time polymerase chain reaction gene expression studies in Nile rats fed Water-Soluble Palm Fruit Extract

Leow SS, Lee WK, Khoo JS, Teoh S, Hoh CC, Fairus S, et al.

Mol Biol Rep, 2020 Dec;47(12):9409-9427.
PMID: 33222119 DOI: 10.1007/s11033-020-06003-3

The Nile rat (Arvicanthis niloticus) is a novel diurnal carbohydrate-sensitive rodent useful for studies on type 2 diabetes mellitus (T2DM) and the metabolic syndrome. Hepatic responses to T2DM and any interventions thereof can be evaluated via transcriptomic gene expression analysis. However, the study of gene expression via real-time reverse transcription quantitative polymerase chain reaction (RT-qPCR) requires identification of stably expressed reference genes for accurate normalisation. This study describes the evaluation and identification of stable reference genes in the livers from Control Nile rats as well as those supplemented with Water-Soluble Palm Fruit Extract, which has been previously shown to attenuate T2DM in this animal model. Seven genes identified as having stable expression in RNA-Sequencing transcriptome analysis were chosen for verification using real-time RT-qPCR. Six commonly used reference genes from previous literature and two genes from a previous microarray gene expression study in Nile rats were also evaluated. The expression data of these 15 candidate reference genes were analysed using the RefFinder software which incorporated analyses performed by various algorithms. The Hpd, Pnpla6 and Vpp2 genes were identified as the most stable across the 36 samples tested. Their applicability was demonstrated through the normalisation of the gene expression profiles of two target genes, Cela1 and Lepr. In conclusion, three novel reference genes which can be used for robust normalisation of real-time RT-qPCR data were identified, thereby facilitating future hepatic gene expression studies in the Nile rat.

Matched MeSH terms: Software
Fulltext Diet Composition of the Wild Stump-Tailed Macaque (Macaca arctoides) in Perlis State Park, Peninsular Malaysia, Using a Chloroplast tRNL DNA Metabarcoding Approach: A Preliminary Study

Osman NA, Abdul-Latiff MAB, Mohd-Ridwan AR, Yaakop S, Nor SM, Md-Zain BM

Animals (Basel), 2020 Nov 26;10(12).
PMID: 33255964 DOI: 10.3390/ani10122215

Understanding dietary diversity is a fundamental task in the study of stump-tailed macaque, Macaca arctoides in its natural habitat. However, direct feeding observation and morphological identification using fecal samples are not effective and nearly impossible to obtain in natural habitats because this species is sensitive to human presence. As ecological methods are challenging and time-consuming, DNA metabarcoding offers a more powerful assessment of the diet. We used a chloroplast tRNL DNA metabarcoding approach to identify the diversity of plants consumed by free-ranging M. arctoides in the Malaysia-Thailand border region located in Perlis State Park, Peninsular Malaysia. DNA was extracted from three fecal samples, and chloroplast tRNL DNA was amplified and sequenced using the Illumina MiniSeq platform. Sequences were analyzed using the CLC Genomic Workbench software. A total of 145 plant species from 46 families were successfully identified as being consumed by M. arctoides. The most abundant species were yellow saraca, Saraca thaipingensis (11.70%), common fig, Ficus carica (9.33%), aramata, Clathrotropis brachypetala (5.90%), sea fig, Ficus superba (5.44%), and envireira, Malmea dielsiana (1.70%). However, Clathrotropis and Malmea are not considered Malaysian trees because of limited data available from Malaysian plant DNA. Our study is the first to identify plant taxa up to the species level consumed by stump-tailed macaques based on a DNA metabarcoding approach. This result provides an important understanding on diet of wild M. arctoides that only reside in Perlis State Park, Malaysia.

Matched MeSH terms: Software
miRNA for the assessment of lymph node metastasis in patients with oral squamous cell carcinoma: Systematic review and metanalysis

Jadhav KB, Nagraj SK, Arora S

J Oral Pathol Med, 2020 Nov 21.
PMID: 33220092 DOI: 10.1111/jop.13134

BACKGROUND: miRNA is one of the advanced epigenetic molecular markers correlating with lymph node metastasis in patients with Oral squamous cell carcinoma (OSCC). Numerous published papers are showing correlation of miRNA with metastasis. There is a need to analyze and validate such correlation.
METHOD: English language literature in major databases from the last 20 years was searched using controlled vocabulary and keywords. Strict inclusion and exclusion criteria were followed for selection of studies. The quality assessment was done as per the QUADAS tool 2 by three independent reviewers. The metanalysis was performed by using random effect model. Standardized mean difference (SMD) was considered as the effect measure. Statistical software used was STATA version 13.1.
RESULTS: With all inclusion and exclusion criteria, eight studies could qualify for metanalysis. The pooled estimate is found to be 0.13 (-0.35, 0.62), P = .585, which is statistically not significant. This indicates that there is a no significant difference in the fold change between metastasis and no metastasis groups. P-value of chi-square statistic for heterogeneity is

Matched MeSH terms: Software
Fulltext Development of a Personalized Mobile Mental Health Intervention for Workplace Cyberbullying Among Health Practitioners: Protocol for a Mixed Methods Study

Kim YJ, Qian L, Aslam MS

JMIR Res Protoc, 2020 Nov 20;9(11):e23112.
PMID: 33216000 DOI: 10.2196/23112

BACKGROUND: Workplace cyberbullying harms the psychological and social functioning of professionals working in an organization and may decrease the productivity and efficiency of daily life tasks. A recent study on trainee doctors across 8 different United Kingdom National Health Service trusts found health issues and job dissatisfaction in people who have experienced workplace cyberbullying. This disabling effect is even more noticeable in low-socioeconomic communities within low-income countries. In Malaysia, there is a need to create a personalized mobile mental health intervention program for health care professionals. These programs should be directed to prevent and decrease psychosocial issues and enhance coordination among health care professionals to solve health issues in the community.
OBJECTIVE: Our main objective is to study the pre-effects and posteffects of the Personalized Mobile Mental Health Intervention (PMMH-I) for workplace cyberbullying in public and private hospitals in Malaysia.
METHODS: A hospital-based multimethod multi-analytic evidential approach is proposed, involving social and psychological health informatics. The project has been subdivided into 3 stages, starting with Phase 1, a prevalence study, followed by exploratory studies. Phase 2 consists of a quasi-experimental design, whereas the development of a prototype and their testing will be proposed in Phase 3. Each stage includes the use of quantitative and qualitative methods (mixed-method program), using SPSS (version 26.0; IBM Corp) and Stata (version 16.1; StataCorp) as tools for quantitative research, and NVivo (version 1.0; QSR International) and Atlas.ti (version 9.0.16; ATLAS.ti Scientific Software Development GmbH) for qualitative research.
RESULTS: The results of this study will determine the pre- and posteffectiveness of an integrated PMMH-I for health care professionals. The prototype system platform will be developed and implemented in a public and private hospital. Results from Phase 1 will be published in 2021, followed by the implementation of Phase 2 in subsequent years.
CONCLUSIONS: This study will provide evidence and guidance regarding the implementation of a personalized mobile mental health intervention for health care professionals into routine public and private hospitals to enhance communication and resolve conflicts.
INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): PRR1-10.2196/23112.

Matched MeSH terms: Software
Optic Canal Analysis in Syndromic Craniosynostosis: Volumetric and Surface Area Validation Study Using Different Measurement Modalities

Hariri F, Zainudin NAA, Anuar AMS, Ibrahim N, Abdullah NA, Aziz IA, et al.

J Craniofac Surg, 2020 11 7;32(1):355-359.
PMID: 33156163 DOI: 10.1097/SCS.0000000000006981

BACKGROUND: In syndromic craniosynostosis (SC), unlike persistent corneal irritation due to severe exophthalmos and increased intracranial pressure, optic canal (OC) stenosis has been scarcely reported to cause visual impairment. This study aimed to validate the OC volumetric and surface area measurement among SC patients.
METHODS: Sixteen computed tomography scan of SC patients (8 months-6 years old) were imported to Materialise Interactive Medical Image Control System (MIMICS) and Materialise 3-matics software. Three-dimensional (3D) OC models were fabricated, and linear measurements were obtained. Mathematical formulas were used for calculation of OC volume and surface area from the 3D model. The same measurements were obtained from the software and used as ground truth. Data normality was investigated before statistical analyses were performed. Wilcoxon test was used to validate differences of OC volume and surface area between 3D model and software.
RESULTS: The mean values for OC surface area for 3D model and MIMICS software were 103.19 mm2 and 31.27 mm2, respectively, whereas the mean for OC volume for 3D model and MIMICS software were 184.37 mm2 and 147.07 mm2, respectively. Significant difference was found between OC volume (P = 0.0681) and surface area (P = 0.0002) between 3D model and software.
CONCLUSION: Optic canal in SC is not a perfect conical frustum thus making 3D model measurement and mathematical formula for surface area and volume estimation not ideal. Computer software remains the best modality to gauge dimensional parameter and is useful to elucidates the relationship of OC and eye function as well as aiding intervention in SC patients.

Matched MeSH terms: Software
Fulltext Screening of Electrospray-operating Parameters in the Production of Alginate-Royal Jelly Microbeads Using Factorial Design

Shaiqah MR, Salahuddin HM, Afiful Huda AYA, Izzuddin M, Nur Shafiq NIM, Nur Hakimah MA, et al.

J Pharm Bioallied Sci, 2020 Nov;12(Suppl 2):S703-S706.
PMID: 33828364 DOI: 10.4103/jpbs.JPBS_249_19

Introduction: Royal jelly (RJ) has been consumed as food or as a supplement because of its high nutritional and medicinal values. A fresh harvested RJ is yellowish to whitish in color and contains proteins, free amino acids, lipids, vitamins, and sugar. Without proper storage conditions, such as at 4°C, the color of RJ changes to much darker yellow and produces a rancid smell. To prolong its shelf life, RJ is usually mixed with honey. Alginate, a natural and edible polymer derived from seaweed, is commonly used to encapsulate drugs and food due to its ability to form gels by reacting with divalent cations. However, there is a lack of research on the microencapsulation of RJ in alginate using electrospray. The electrospray technique has the advantage in producing consistent size and shape of alginate microbeads under optimum parameters.
Aim: This research aimed to optimize electrospray-operating parameters in producing alginate-RJ microbeads.
Materials and Methods: Optimization of alginate-RJ microbeads electrospray parameters was carried out using 24 factorial design with three center points (19 runs). The studied parameters were flow rate, high voltage, nozzle size, and tip-to-collector distance, whereas the responses were particle size, particle size distribution, and sphericity factor. The responses of each run were analyzed using Design-Expert software.
Results: Nozzle size is a significant parameter that influences the particle size. Flow rate is a significant parameter influencing the sphericity factor.
Conclusion: Screening of the electrospray-operating parameters paves the way in determining the significant parameters and their design space to produce consistent alginate-RJ microbeads.

Matched MeSH terms: Software
Personalised management of Chronic Obstructive Pulmonary Disease (COPD): Malaysian consensus algorithm for appropriate use of inhaled corticosteroid (ICS) in COPD patients

Marzuki NM, Jaeb MZM, Ban A, Ismail AI, Ali IAH, Razali NM, et al.

Med J Malaysia, 2020 11;75(6):717-721.
PMID: 33219183

BACKGROUND: Regarding the long-term safety issues with the use of inhaled corticosteroids (ICS) and the clinical predominance of dual bronchodilators in enhancing treatment outcomes in chronic obstructive pulmonary disease (COPD), ICS is no longer a "preferred therapy" according to the Global Initiative for Chronic Obstructive Lung Disease except on top of a dual bronchodilator. This has necessitated a change in the current therapy for many COPD patients.
OBJECTIVE: To determine a standardised algorithm to reassess and personalise the treatment COPD patients based on the available evidence.
METHODS: A consensus statement was agreed upon by a panel of pulmonologists in from 11 institutes in Malaysia whose members formed this consensus group.
RESULTS: According to the consensus, which was unanimously adopted, all COPD patients who are currently receiving an ICS-based treatment should be reassessed based on the presence of co-existence of asthma or high eosinophil counts and frequency of moderate or severe exacerbations in the previous 12 months. When that the patients meet any of the aforementioned criteria, then the patient can continue taking ICS-based therapy. However, if the patients do not meet the criteria, then the treatment of patients need to be personalised based on whether the patient is currently receiving long-acting beta-agonists (LABA)/ICS or triple therapy.
CONCLUSION: A flowchart of the consensus providing a guidance to Malaysian clinicians was elucidated based on evidences and international guidelines that identifies the right patients who should receive inhaled corticosteroids and enable to switch non ICS based therapies in patients less likely to benefit from such treatments.

Matched MeSH terms: Software Design
Fulltext Computational fluid dynamics modelling of human upper airway: A review

Faizal WM, Ghazali NNN, Khor CY, Badruddin IA, Zainon MZ, Yazid AA, et al.

Comput Methods Programs Biomed, 2020 Nov;196:105627.
PMID: 32629222 DOI: 10.1016/j.cmpb.2020.105627

BACKGROUND AND OBJECTIVE: Human upper airway (HUA) has been widely investigated by many researchers covering various aspects, such as the effects of geometrical parameters on the pressure, velocity and airflow characteristics. Clinically significant obstruction can develop anywhere throughout the upper airway, leading to asphyxia and death; this is where recognition and treatment are essential and lifesaving. The availability of advanced computer, either hardware or software, and rapid development in numerical method have encouraged researchers to simulate the airflow characteristics and properties of HUA by using various patient conditions at different ranges of geometry and operating conditions. Computational fluid dynamics (CFD) has emerged as an efficient alternative tool to understand the airflow of HUA and in preparing patients to undergo surgery. The main objective of this article is to review the literature that deals with the CFD approach and modeling in analyzing HUA.
METHODS: This review article discusses the experimental and computational methods in the study of HUA. The discussion includes computational fluid dynamics approach and steps involved in the modeling used to investigate the flow characteristics of HUA. From inception to May 2020, databases of PubMed, Embase, Scopus, the Cochrane Library, BioMed Central, and Web of Science have been utilized to conduct a thorough investigation of the literature. There had been no language restrictions in publication and study design of the database searches. A total of 117 articles relevant to the topic under investigation were thoroughly and critically reviewed to give a clear information about the subject. The article summarizes the review in the form of method of studying the HUA, CFD approach in HUA, and the application of CFD for predicting HUA obstacle, including the type of CFD commercial software are used in this research area.
RESULTS: This review found that the human upper airway was well studied through the application of computational fluid dynamics, which had considerably enhanced the understanding of flow in HUA. In addition, it assisted in making strategic and reasonable decision regarding the adoption of treatment methods in clinical settings. The literature suggests that most studies were related to HUA simulation that considerably focused on the aspects of fluid dynamics. However, there is a literature gap in obtaining information on the effects of fluid-structure interaction (FSI). The application of FSI in HUA is still limited in the literature; as such, this could be a potential area for future researchers. Furthermore, majority of researchers present the findings of their work through the mechanism of airflow, such as that of velocity, pressure, and shear stress. This includes the use of Navier-Stokes equation via CFD to help visualize the actual mechanism of the airflow. The above-mentioned technique expresses the turbulent kinetic energy (TKE) in its result to demonstrate the real mechanism of the airflow. Apart from that, key result such as wall shear stress (WSS) can be revealed via turbulent kinetic energy (TKE) and turbulent energy dissipation (TED), where it can be suggestive of wall injury and collapsibility tissue to the HUA.

Matched MeSH terms: Software
In silico molecular docking in DNA aptamer development

Navien TN, Thevendran R, Hamdani HY, Tang TH, Citartan M

Biochimie, 2020 Oct 18;180:54-67.
PMID: 33086095 DOI: 10.1016/j.biochi.2020.10.005

Aptamers are single-stranded DNA or RNA oligonucleotides generated by SELEX that exhibit binding affinity and specificity against a wide variety of target molecules. Compared to RNA aptamers, DNA aptamers are much more stable and therefore are widely adopted in a number of applications especially in diagnostics. The tediousness and rigor associated with certain steps of the SELEX intensify the efforts to adopt in silico molecular docking approaches together with in vitro SELEX procedures in developing DNA aptamers. Inspired by these endeavors, we carry out an overview of the in silico molecular docking approaches in DNA aptamer generation, by detailing the stepwise procedures as well as shedding some light on the various softwares used. The in silico maturation strategy and the limitations of the in silico approaches are also underscored.

Matched MeSH terms: Software
Fulltext Manufacture of Contact Lens of Nanoparticle-Doped Polymer Complemented with ZEMAX

Shaker LM, Al-Amiery AA, Kadhum AAH, Takriff MS

Nanomaterials (Basel), 2020 Oct 15;10(10).
PMID: 33076278 DOI: 10.3390/nano10102028

Many people suffer from myopia or hyperopia due to the refractive errors of the cornea all over the world. The use of high refractive index (RI), Abbe number (νd), and visible light transmittance (T%) polymeric contact lenses (CLs) holds great promise in vision error treatment as an alternative solution to the irreversible laser-assisted in situ keratomileusis (LASIK) surgery. Titanium dioxide nanoparticles (TiO2 NPs) have been suggested as a good candidate to rise the RI and maintain high transparency of a poly(methyl methacrylate) (PMMA)-TiO2 nanocomposite. This work includes a preparation of TiO2 NPs using the sol gel method as well as a synthesis of pure PMMA by free radical polarization and PMMA-TiO2 CLs using a cast molding method of 0.005 and 0.01 w/v concentrations and a study of their effect on the aberrated human eye. ZEMAX optical design software was used for eye modeling based on the Liou and Brennan eye model and then the pure and doped CLs were applied. Ocular performance was evaluated by modulation transfer function (MTF), spot diagram, and image simulation. The used criteria show that the best vision correction was obtained by the CL of higher doping content (p < 0.0001) and that the generated spherical and chromatic aberrations in the eye had been reduced.

Matched MeSH terms: Software
Fulltext Dental caries in primary and permanent teeth in children's worldwide, 1995 to 2019: a systematic review and meta-analysis

Kazeminia M, Abdi A, Shohaimi S, Jalali R, Vaisi-Raygani A, Salari N, et al.

Head Face Med, 2020 Oct 06;16(1):22.
PMID: 33023617 DOI: 10.1186/s13005-020-00237-z

BACKGROUND: Early childhood caries (ECC) is a type of dental caries in the teeth of infants and children that is represented as one of the most prevalent dental problems in this period. Various studies have reported different types of prevalence of dental caries in primary and permanent teeth in children worldwide. However, there has been no comprehensive study to summarize the results of these studies in general, so this study aimed to determine the prevalence of dental caries in primary and permanent teeth in children in different continents of the world during a systematic review and meta-analysis.
METHODS: In this review study, articles were extracted by searching in the national and international databases of SID, MagIran, IranMedex, IranDoc, Cochrane, Embase, ScienceDirect, Scopus, PubMed, and Web of Science (ISI) between 1995 and December 2019. Random effects model was used for analysis and heterogeneity of studies was evaluated by using the I2 index. Data were analyzed by using the Comprehensive Meta-Analysis (Version 2) software.
FINDINGS: In this study, a total of 164 articles (81 articles on the prevalence of dental caries in primary teeth and 83 articles on the prevalence of dental caries in permanent teeth) were entered the meta-analysis. The prevalence of dental caries in primary teeth in children in the world with a sample size of 80,405 was 46.2% (95% CI: 41.6-50.8%), and the prevalence of dental caries in permanent teeth in children in the world with a sample size of 1,454,871 was 53.8% (95% CI: 50-57.5%). Regarding the heterogeneity on the basis of meta-regression analysis, there was a significant difference in the prevalence of dental caries in primary and permanent teeth in children in different continents of the world. With increasing the sample size and the year of study, dental caries in primary teeth increased and in permanent teeth decreased.
CONCLUSION: The results of this study showed that the prevalence of primary and permanent dental caries in children in the world was found to be high. Therefore, appropriate strategies should be implemented to improve the aforementioned situation and to troubleshoot and monitor at all levels by providing feedback to hospitals.

Matched MeSH terms: Software
Fulltext Quantitative dataset of shallow water reef in Pulau Bidong, Southern of South China sea during pre and post of tropical storm (Pabuk - January 2019)

Bachok Z, Safuan CDM, Roseli NH, Akhir MF

Data Brief, 2020 Oct;32:106182.
PMID: 32923531 DOI: 10.1016/j.dib.2020.106182

This article provides raw datasets of the coral reefs status in Pulau Bidong, southern of South China Sea before and after being strike by the tropical storm Pabuk on January 2019. Data were collected using a rapid coral survey method called Coral Video Transect (CVT) technique. The data were collected along a 100 m transect line set up parallel to the shoreline and at a constant depth. In total, eight transects were surveyed during both periods (pre - August 2016, post - March 2019). Back in laboratory, the footage was then extracted into non-overlapping frames or still images prior to image analysis using Coral Point Count with Excel Extension (CPCe) software. The benthic coral reefs relative percentage cover was automatically generated after the image analysis and represented by five major categories; live coral (C), algae (ALG), other invertebrates (OT), dead coral (DC), and sand silt and rock (SR). Live coral cover was identified up to the genus level. This raw dataset was used in this article. The data provided in this article could be of significant use for future studies especially on coral recovery after the natural disturbances. It can provide a baseline assessment especially for coral reefs management as well as to comprehend changes in coral health status in the face of natural and anthropogenic disturbances. The data presented here support the information in the article Safuan et al. (2020).

Matched MeSH terms: Software
Fulltext Dataset of theoretical Molecular Electrostatic Potential (MEP), Highest Occupied Molecular Orbital-Lowest Unoccupied Molecular Orbital (HOMO-LUMO) band gap and experimental cole-cole plot of 4-(ortho-, meta- and para-fluorophenyl)thiosemicarbazide isomers

Silvarajoo S, Osman UM, Kamarudin KH, Razali MH, Yusoff HM, Bhat IUH, et al.

Data Brief, 2020 Oct;32:106299.
PMID: 32984485 DOI: 10.1016/j.dib.2020.106299

One-pot synthetic method was adopted to prepare three isomers 4-(ortho-fluorophenyl)thiosemi- carbazide), 4-(meta-fluorophenyl)thiosemicarbazide and 4-(para-fluorophenyl)thiosemicarbazide. The products were obtained in ethanolic solution from a reaction between ortho, meta and para derivatives of fluorophenyl isothiocyanate and hydrazine hydrate. This work presents the theoretical Molecular Electrostatic Potential (MEP) and Highest Occupied Molecular Orbital-Lowest Unoccupied Molecular Orbital (HOMO-LUMO) computational data through Gaussview 5.0.9 and Gaussian09 software. Experimental Cole-cole plot for conductivity determination was also illustrated. The present data is important to manipulate the properties of compounds according to the position of a fluorine atom.

Matched MeSH terms: Software
Fulltext MYNursingHome: A fully-labelled image dataset for indoor object classification

Ismail A, Ahmad SA, Che Soh A, Hassan MK, Harith HH

Data Brief, 2020 Oct;32:106268.
PMID: 32984464 DOI: 10.1016/j.dib.2020.106268

A fully labelled image dataset serves as a valuable tool for reproducible research inquiries and data processing in various computational areas, such as machine learning, computer vision, artificial intelligence and deep learning. Today's research on ageing is intended to increase awareness on research results and their applications to assist public and private sectors in selecting the right equipments for the elderlies. Many researches related to development of support devices and care equipment had been done to improve the elderly's quality of life. Indoor object detection and classification for autonomous systems require large annotated indoor images for training and testing of smart computer vision applications. This dataset entitled MYNursingHome is an image dataset for commonly used objects surrounding the elderlies in their home cares. Researchers may use this data to build up a recognition aid for the elderlies. This dataset was collected from several nursing homes in Malaysia comprises 37,500 digital images from 25 different indoor object categories including basket bin, bed, bench, cabinet and others.

Matched MeSH terms: Software
Fulltext Electrical resistivity survey data for potential aquifer in Banggi Island, Sabah, Malaysia

Rahman MNIA, Jeofry H, Basarian MS

Data Brief, 2020 Oct;32:106194.
PMID: 32904202 DOI: 10.1016/j.dib.2020.106194

The survey data on potential aquifer was collected at two sites located in Banggi Island (i.e. Laksian Primary School [LPS] and Padang Primary School [PPS]), Malaysia on 25 and 26 April 2013. Both locations are geologically surrounded by various types of lithologies, namely, sandstone, mudstone, siltstone, shale, chert, conglomerate, lignite, tuff, limestone, terrace sand, gravel and coral. The resistivity data consisted of six-line pole-dipole short arrays and were recorded in-situ using SAS 4000 ABEM Lund Imaging System, together with a relay switching unit (Electrode Selector ES 464), six multiconductor cables, steel rod electrodes and jumpers. The data, namely electrode spacing, depth of investigation, subsurface resistivity, type of material and horizontal data coverage were used to assess the characteristics of the potential aquifer. The recorded data were then processed using RES2DINV software to obtain 2-D inversion model of the subsurface. The data were also equipped with six models of inverse resistivity section for both areas. The data obtained can be used by the government and stakeholders for groundwater exploration and extraction in order to provide water supplies for local communities, especially since access to these resources from the surrounding water treatment plants on the island is limited.

Matched MeSH terms: Software
Fulltext Experimental and DFT data of p-chlorocalix[4]arene as drugs receptor

Kadir MA, Abdul Razak FI, Haris NSH

Data Brief, 2020 Oct;32:106263.
PMID: 32905010 DOI: 10.1016/j.dib.2020.106263

The data in this article provide information on spectroscopic and theoretical data for p-chlorocalix[4]arene when combined with selected drugs, such as paracetamol, ibuprofen, and cetirizine. The present spectroscopic data are generated from Fourier Transform Infrared (FTIR), Nuclear Magnetic Resonance (1H NMR and 13C NMR), and Ultraviolet-Visible spectroscopy (UV-Vis) as the key tools for molecular characterization. The measurement of the optimization energy, interaction energy, and the band gap energy between the molecules was calculated by Gaussian 09 software. It is interesting to note that of the three titled drugs identified, p-chlorocalix[4]arene showed the highest interaction energy with paracetamol, followed by ibuprofen and cetirizine.

Matched MeSH terms: Software
Fulltext The mediating role of procedural justice on the relationship between job analysis and employee performance in Jordan Industrial Estates

Khtatbeh MM, Mahomed ASB, Rahman SBA, Mohamed R

Heliyon, 2020 Oct;6(10):e04973.
PMID: 33083583 DOI: 10.1016/j.heliyon.2020.e04973

Job analysis and employees' perception of justice have a significant influence on employee performance within an organization. This study examined the relationships between job analysis, job performance, and procedural justice among local employees in Jordan Industrial Estates. The literature demonstrated gaps in knowledge regarding the relationships between these variables in developing countries, which are intended to be filled by this study. The study drew from the pay model and equity theory. Data were collected with a survey questionnaire from 690 Jordanian employees working in three industrial estates. The data were analyzed through structural equation modelling (SEM) using SPSS and AMOS software tools. The results indicated to a significant positive relationship between job analysis and job performance, job analysis and procedural justice, and a positive relationship between procedural justice and job performance. Also, it is found that procedural justice mediates the relationship between job analysis and job performance. It is expected that the results of this study would have an impact on employee's performance through the fair implementation of one of the human resources practices, namely, job analysis, and thus organizational performance. Also, it contributes to the body of knowledge and supports the mediating role of procedural justice in decisions taken within the organization.

Matched MeSH terms: Software

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links