Displaying publications 81 - 100 of 793 in total

Abstract:
Sort:
  1. Fulltext Quality use of medicine in a developing economy: Measures to overcome challenges in the Malaysian healthcare system
    Mohd-Tahir NA, Paraidathathu T, Li SC
    SAGE Open Med, 2015;3:2050312115596864.
    PMID: 26770795 DOI: 10.1177/2050312115596864
    Malaysia inherits a highly subsidized tax-based public healthcare system complemented by a fee-for-service private sector. Population health in Malaysia has considerably improved since independence using a relatively small amount of gross domestic product (~4%). Brain drain of highly specialized personnel, growth in healthcare spending, demographic and disease pattern changes and increase in patients' demands and expectations towards better medical care are exerting pressure on the sustainability of the system to continuously provide efficient and effective services at relatively low cost. Malaysia has adopted and implemented some of the quality use of medicine concepts such as National Essential Medicine List, health technology assessment and promotion of generic medicines in their health policy, but so far the results may not be optimal. Activities to further promote these strategies are needed for successful implementation to achieve more positive and sustained beneficial outcomes. Better strategic planning, management and collaboration between various stakeholders, considering the needs and barriers of the strategies, are important to ensure effective implementation of the strategies. More emphasis should be placed upon more equitable and rational distribution of healthcare resources to cater for rapid urbanization. Additionally, a sustainable health financing structure that is more progressive and does not encourage moral hazard should be established. In conclusion, Malaysia has achieved good outcomes in population health with relatively low financial inputs since independence. However, changes in the overall environment have created issues which would threaten the long-term viability of the healthcare system if not tackled properly. The numbers of internationally trialled strategies could be used to deal with these challenges. In addition, coordinated implementation of these strategies and effective engagement and communication between various stakeholders are necessary to further strengthen the Malaysian healthcare system effectively.
    Matched MeSH terms: Technology Assessment, Biomedical
  2. The determinants of fertility: a theoretical forecasting model
    Fish M, Thompson AA
    Behav Sci, 1970 Jul;15(4):318-28.
    PMID: 5424500
    Matched MeSH terms: Technology
  3. Fulltext Factors affecting risk tolerance among small-scale seasonal commodity farmers and strategies for its improvement
    Agussabti A, Romano R, Rahmaddiansyah R, Isa RM
    Heliyon, 2020 Dec;6(12):e05847.
    PMID: 33426340 DOI: 10.1016/j.heliyon.2020.e05847
    In developing countries, farming businesses are dominated by small-scale farmers with limited resources. Such farmers are subjected to high risks, influencing the success rate of their agricultural endeavors. This study, conducted in Aceh Province, Indonesia, measured the risk tolerance among six groups of farmers with businesses based on the following seasonal commodities: paddy, corn, soy, chili, potato, and tomato. A total of 360 respondents were surveyed and 54 key respondents interviewed. A Likert scale was used to assess the risk tolerance levels of the farmers, and ordinal regression analysis to analyze the factors influencing risk tolerance. Paddy, chili, and potato farmers had a relatively high tolerance to farming risks, whereas corn and tomato farmers showed a moderate tolerance. Soy farmers were classified into the low risk tolerance category. Ordinal analysis indicated that the risk tolerance of farmers in each commodity group was influenced by specific factors. Overall, it was found that the farmers' attitudes to risk tolerance were significantly affected by the following factors: experience, education, farming income, capital, land status, and land size. An intervention strategy including improvements in the curriculum, actors, network, scope of clusters, and technology are among the strategies required to positively improve farmers' perceptions and increase their tolerance to farming risks.
    Matched MeSH terms: Technology
  4. Fulltext Quality of Service Class Identifier (QCI) radio resource allocation algorithm for LTE downlink
    Mamman M, Hanapi ZM, Abdullah A, Muhammed A
    PLoS One, 2019;14(1):e0210310.
    PMID: 30682038 DOI: 10.1371/journal.pone.0210310
    The increasing demand for network applications, such as teleconferencing, multimedia messaging and mobile TV, which have diverse requirements, has resulted in the introduction of Long Term Evolution (LTE) by the Third Generation Partnership Project (3GPP). LTE networks implement resource allocation algorithms to distribute radio resource to satisfy the bandwidth and delay requirements of users. However, the scheduling algorithm problem of distributing radio resources to users is not well defined in the LTE standard and thus considerably affects transmission order. Furthermore, the existing radio resource algorithm suffers from performance degradation under prioritised conditions because of the minimum data rate used to determine the transmission order. In this work, a novel downlink resource allocation algorithm that uses quality of service (QoS) requirements and channel conditions to address performance degradation is proposed. The new algorithm is formulated as an optimisation problem where network resources are allocated according to users' priority, whereas the scheduling algorithm decides on the basis of users' channel status to satisfy the demands of QoS. Simulation is used to evaluate the performance of the proposed algorithm, and results demonstrate that it performs better than do all other algorithms according to the measured metrics.
    Matched MeSH terms: Wireless Technology
  5. Fulltext Recycling Waste Cotton Cloths for the Isolation of Cellulose Nanocrystals: A Sustainable Approach
    Mohamed SH, Hossain MS, Mohamad Kassim MH, Ahmad MI, Omar FM, Balakrishnan V, et al.
    Polymers (Basel), 2021 Feb 19;13(4).
    PMID: 33669623 DOI: 10.3390/polym13040626
    There is an interest in the sustainable utilization of waste cotton cloths because of their enormous volume of generation and high cellulose content. Waste cotton cloths generated are disposed of in a landfill, which causes environmental pollution and leads to the waste of useful resources. In the present study, cellulose nanocrystals (CNCs) were isolated from waste cotton cloths collected from a landfill. The waste cotton cloths collected from the landfill were sterilized and cleaned using supercritical CO2 (scCO2) technology. The cellulose was extracted from scCO2-treated waste cotton cloths using alkaline pulping and bleaching processes. Subsequently, the CNCs were isolated using the H2SO4 hydrolysis of cellulose. The isolated CNCs were analyzed to determine the morphological, chemical, thermal, and physical properties with various analytical methods, including attenuated total reflection-Fourier transform-infrared spectroscopy (ATR-FTIR), field-emission scanning electron microscopy (FE-SEM), energy-filtered transmission electron microscopy (EF-TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results showed that the isolated CNCs had a needle-like structure with a length and diameter of 10-30 and 2-6 nm, respectively, and an aspect ratio of 5-15, respectively. Additionally, the isolated CNCs had a high crystallinity index with a good thermal stability. The findings of the present study revealed the potential of recycling waste cotton cloths to produce a value-added product.
    Matched MeSH terms: Technology
  6. Acceptance towards social network information system for earlier detection of Influenza outbreak
    Sulaiman MH, Aizuddin AN, Hod R, Puteh SEW
    Med J Malaysia, 2021 03;76(2):145-150.
    PMID: 33742620
    INTRODUCTION: Influenza outbreak causes high economic burden to Malaysia and other countries in South East Asia. Scientists have found a relatively new way to detect influenza outbreaks early thus reducing the burden of disease by early intervention. This new technology is a social network information system which uses Facebook or Twitter data to detect potential influenza cases. Such system is good to be developed by the Malaysian government as it can detect influenza outbreaks three weeks earlier than the normal pathway. However, to implement this we require good evidence that the development will be accepted by potential users.

    OBJECTIVE: This study was looking at the acceptance towards using social network information system among public health workers.

    MATERIALS AND METHOD: This study was done on 205 Malaysian One Health University Network (MyOHUN) members through email and physical survey.

    RESULTS: Results show that 62.4% public health workers accepted the use technology. The acceptance was shown to be associated with performance expectancy (p<0.05). However, unlike the very famous Unified Theory of Acceptance and Use of Technology (UTAUT) model, the acceptance of social network information system was not associated with effort expectancy, social factors, facilitating conditions and socio-demographic factors. Therefore, it is suggested that social network information system be developed by the authorities in Malaysia, and be developed in a way that the system could strongly increase performance in detection of outbreak earlier than the current normal pathways. As such the system to be accepted and used, it must be sensitive, specific and be able to detect influenza outbreak early CONCLUSION: The development of social network information system is feasible as it is highly accepted and it's potential to improve early detection of influenza outbreak.

    Matched MeSH terms: Technology
  7. Fulltext Current Update of Collagen Nanomaterials-Fabrication, Characterisation and Its Applications: A Review
    Lo S, Fauzi MB
    Pharmaceutics, 2021 Feb 28;13(3).
    PMID: 33670973 DOI: 10.3390/pharmaceutics13030316
    Tissue engineering technology is a promising alternative approach for improvement in health management. Biomaterials play a major role, acting as a provisional bioscaffold for tissue repair and regeneration. Collagen a widely studied natural component largely present in the extracellular matrix (ECM) of the human body. It provides mechanical stability with suitable elasticity and strength to various tissues, including skin, bone, tendon, cornea and others. Even though exogenous collagen is commonly used in bioscaffolds, largely in the medical and pharmaceutical fields, nano collagen is a relatively new material involved in nanotechnology with a plethora of unexplored potential. Nano collagen is a form of collagen reduced to a nanoparticulate size, which has its advantages over the common three-dimensional (3D) collagen design, primarily due to its nano-size contributing to a higher surface area-to-volume ratio, aiding in withstanding large loads with minimal tension. It can be produced through different approaches including the electrospinning technique to produce nano collagen fibres resembling natural ECM. Nano collagen can be applied in various medical fields involving bioscaffold insertion or fillers for wound healing improvement; skin, bone, vascular grafting, nerve tissue and articular cartilage regeneration as well as aiding in drug delivery and incorporation for cosmetic purposes.
    Matched MeSH terms: Technology; Nanotechnology
  8. Fulltext Virtual Group Exercises and Psychological Status among Community-Dwelling Older Adults during the COVID-19 Pandemic-A Feasibility Study
    Ibrahim A, Chong MC, Khoo S, Wong LP, Chung I, Tan MP
    Geriatrics (Basel), 2021 Mar 22;6(1).
    PMID: 33810155 DOI: 10.3390/geriatrics6010031
    Social isolation, magnified by the restriction of movement order during the COVID-19 pandemic, may lead to negative psychosocial health impacts among community-dwelling older adults. We, therefore, aimed to evaluate recruitment rates, data collection, and group exercises conducted through virtual technology among individuals aged 60 years and over in Malaysia. Participants were recruited from the Promoting Independence in Seniors with Arthritis (PISA) pilot cohort through social media messaging. A four-week course of virtual group exercise was offered. Anxiety and depression were assessed with the Hospital Anxiety and Depression Scale (HADS) during the last attended follow-up of the cohort study (pre-pandemic), pre-intervention, and post-intervention. Exercise adherence was recorded using diaries with daily entries and attendance to the virtual group exercise sessions were also captured electronically daily. The outcomes of interest were changes in anxiety and depression scores from baseline to pre-intervention (pandemic-related) and post-intervention (virtual exercise related). Forty-three individuals were recruited. A significant increase in anxiety scores from baseline to pre-intervention was observed. Comparisons using repeated-measures analysis of variance between those who attendance ≥14 and <14 group exercise sessions revealed no between-within subject differences in depression scores. There was a 23% dropout rate in the post intervention survey and 60.5% of diaries were returned. Virtual group exercises could be conducted among older adults residing in a middle-income country, though recruitment would have been limited to those with internet access.
    Matched MeSH terms: Technology
  9. Use of technology by orientation and mobility professionals in Australia and Malaysia before COVID-19
    Deverell L, Bhowmik J, Lau BT, Al Mahmud A, Sukunesan S, Islam FMA, et al.
    Disabil Rehabil Assist Technol, 2020 Jul 09.
    PMID: 32643468 DOI: 10.1080/17483107.2020.1785565
    PURPOSE: Orientation and Mobility (O&M) professionals teach people with low vision or blindness to use specialist assistive technologies to support confident travel, but many O&M clients now prefer a smartphone. This study aimed to investigate what technology O&M professionals in Australia and Malaysia have, use, like, and want to support their client work, to inform the development of O&M technologies and build capacity in the international O&M profession.

    MATERIALS AND METHODS: A technology survey was completed by professionals (n = 36) attending O&M workshops in Malaysia. A revised survey was completed online by O&M specialists (n = 31) primarily in Australia. Qualitative data about technology use came from conferences, workshops and interviews with O&M professionals. Descriptive statistics were analysed together with free-text data.

    RESULTS: Limited awareness of apps used by clients, unaffordability of devices, and inadequate technology training discouraged many O&M professionals from employing existing technologies in client programmes or for broader professional purposes. Professionals needed to learn smartphone accessibility features and travel-related apps, and ways to use technology during O&M client programmes, initial professional training, ongoing professional development and research.

    CONCLUSIONS: Smartphones are now integral to travel with low vision or blindness and early-adopter O&M clients are the travel tech-experts. O&M professionals need better initial training and then regular upskilling in mainstream O&M technologies to expand clients' travel choices. COVID-19 has created an imperative for technology laggards to upskill for O&M tele-practice. O&M technology could support comprehensive O&M specialist training and practice in Malaysia, to better serve O&M clients with complex needs.Implications for rehabilitationMost orientation and mobility (O&M) clients are travelling with a smartphone, so O&M specialists need to be abreast of mainstream technologies, accessibility features and apps used by clients for orientation, mobility, visual efficiency and social engagement.O&M specialists who are technology laggards need human-guided support to develop confidence in using travel technologies, and O&M clients are the experts. COVID-19 has created an imperative to learn skills for O&M tele-practice.Affordability is a significant barrier to O&M professionals and clients accessing specialist travel technologies in Malaysia, and to O&M professionals upgrading technology in Australia.Comprehensive training for O&M specialists is needed in Malaysia to meet the travel needs of clients with low vision or blindness who also have physical, cognitive, sensory or mental health complications.

    Matched MeSH terms: Technology
  10. Fulltext Investigation of struvite crystals formed in palm oil mill effluent anaerobic digester
    Ngatiman M, Jami MS, Abu Bakar MR, Subramaniam V, Loh SK
    Heliyon, 2021 Jan;7(1):e05931.
    PMID: 33490684 DOI: 10.1016/j.heliyon.2021.e05931
    The formation of struvite crystals or magnesium ammonium phosphate (MgNH4PO4) in palm oil mill effluent (POME) occurs as early as in the secondary stage of POME treatment system. Its growth continues in the subsequent tertiary treatment which reduces piping diameter, thus affecting POME treatment efficiency. Hypothesis. The beneficial use of the crystal is the motivation. This occurrence is rarely reported in scientific articles despite being a common problem faced by palm oil millers. The aim of this study is to characterize struvite crystals found in an anaerobic digester of a POME treatment facility in terms of their physical and chemical aspects. The compositions, morphology and properties of these crystals were determined via energy dispersive spectroscopy (EDS), elemental analysis, scanning electron microscopy (SEM) and x-ray diffraction (XRD). Solubility tests were carried out to establish solubility curve for struvite from POME. Finally, crystal growth experiment was done applying reaction crystallization method to demonstrate struvite precipitation from POME. Results showed that high phosphorous (P) (24.85 wt%) and magnesium (Mg) (21.33 wt%) content was found in the struvite sample. Elemental analysis detected carbon (C), hydrogen (H), nitrogen (N) and sulfur (S) below 4 wt%. The crystals analysed by XRD in this study were confirmed as struvite with 94.8% struvite mineral detected from its total volume. Having an orthorhombic crystal system, struvite crystals from POME recorded an average density of 1.701 g cm-3. Solubility curve of struvite from POME was established with maximum solubility of 275.6 mg L-1 at pH 3 and temperature 40 °C. Minimum solubility of 123.6 mg L-1 was recorded at pH 7 and temperature 25 °C. Crystal growth experiment utilizing POME as the source medium managed to achieve 67% reduction in phosphorous content. This study concluded that there is a potential of harnessing valuable nutrients from POME in the form of struvite. Struvite precipitation technology can be adapted in the management of POME in order to achieve maximum utilization of the nutrients that are still abundant in POME. At the same time maximization of nutrient extractions from POME will also reduce pollutants loading in the final discharge.
    Matched MeSH terms: Technology
  11. Fulltext A Survey on Medical, Dental, and Pharmacy Students' Knowledge, Attitude, and Practice about Hepatitis B Infection in a Private Medical University of Malaysia
    Upadhyay DK, Manirajan Y, Iqbal MZ, Paliwal N, Pandey S
    J Res Pharm Pract, 2020 10 08;9(3):128-134.
    PMID: 33489980 DOI: 10.4103/jrpp.JRPP_20_8
    Objective: The present study aimed to assess the knowledge, attitude, and practice (KAP) of 3rd- and 4th-year medical, dental, and pharmacy students about hepatitis B (HB) infection at a private medical university, Malaysia.

    Methods: A cross-sectional, questionnaire-based study was conducted among 482 medical, dental, and pharmacy students of 3rd- and 4th-year degree program of Asian Institute of Medicine, Science and Technology University to assess their KAP about HB infection using 34 prevalidated questions by convenient sampling method. A questionnaire was administered to the students, and their responses were measured at "yes" and "no" scale. Students' responses were entered in SPSS version 22, and quantitative analysis was performed using descriptive statistics and nonparametric tests at P < 0.05.

    Findings: The medical, dental, and pharmacy students had good knowledge and practice with positive attitude about HB infection. Mann-Whitney U-test determined a significant difference in knowledge (P < 0.001) and practice (P < 0.001) scores between medical and pharmacy, attitude (P < 0.001) scores between medical and dental, and attitude (P < 0.001) and practice (P < 0.001) scores between pharmacy and dental students. Students' age was correlated with their attitude, practice, and KAP scores and family income with their knowledge, attitude, practice, and KAP scores.

    Conclusion: Although students' knowledge and practice were good with positive attitude, all the students did not participate in health education program, screening, and vaccination of hepatitis B virus (HBV) infection which makes them more vulnerable to occupational HBV infection. Hence, it is recommended to organize a regular health education program for the students on screening and vaccination against HBV to prevent its infection.

    Matched MeSH terms: Technology
  12. Fulltext Patient’s confidentiality policy breach among nursing students
    Patricia Sator
    Malaysian Journal of Medicine and Health Sciences, 2020;16(105):58-0.
    MyJurnal
    Introduction: Nursing is a regulated profession. Hence, the global commitment for nurses to maintain standards of practice is vital to deliver safe and competent care. Written policies will eliminate uncertainty, ambiguity, and legal issues. For this study, it focused on the importance of the nursing students to understand and practice the regulation on patient’s confidentiality in healthcare setting with the usage of technology such as social media. There is a case like nursing student infringe the privacy of patients with the information they posted on social media, such as posting a patient’s photos or videos without valid consent. Methods: This study is a quantitative, cross-sectional survey de- sign. The respondents were selected as convenience sampling of 120 nursing students from the Faculty of Medicine and Health Sciences, Universiti Malaysia Sabah (FMHS, UMS). Results: There are 7.4% nursing students intention- ally posted in social media, 18.0% maybe and 73.8% unintentionally. And for their guilty feeling after committing confidentially policy breach on patient, there are 8.2% said NO, 32.8% said MAYBE and 59% said YES. Overall, the nursing students are aware of the patient’s confidentiality but there is still a leakage in practicing full nursing standards and regulation. Further study recommended to explore more on this issue. Conclusion: As a conclusion, this study is relevant to conduct among the nursing students to gain their understanding regarding the responsibilities as a future nurse in maintaining the patient’s confidentiality as one of the most important nursing practices to ensure quality of care and continuation of professional service of nursing profession.
    Matched MeSH terms: Technology
  13. QTL Mapping for Red Blotches in Malaysia Red Tilapia (Oreochromis spp.)
    Li BJ, Zhu ZX, Gu XH, Lin HR, Xia JH
    Mar Biotechnol (NY), 2019 Jun;21(3):384-395.
    PMID: 30863905 DOI: 10.1007/s10126-019-09888-9
    Body color is an interesting economic trait in fish. Red tilapia with red blotches may decrease its commercial values. Conventional selection of pure red color lines is a time-consuming and labor-intensive process. To accelerate selection of pure lines through marker-assisted selection, in this study, double-digest restriction site-associated DNA sequencing (ddRAD-seq) technology was applied to genotype a full-sib mapping family of Malaysia red tilapia (Oreochromis spp.) (N = 192). Genome-wide significant quantitative trait locus (QTL)-controlling red blotches were mapped onto two chromosomes (chrLG5 and chrLG15) explaining 9.7% and 8.2% of phenotypic variances by a genome-wide association study (GWAS) and linkage-based QTL mapping. Six SNPs from the chromosome chrLG5 (four), chrLG15 (one), and unplaced supercontig GL831288-1 (one) were significantly associated to the red blotch trait in GWAS analysis. We developed nine microsatellite markers and validated significant correlations between genotypes and blotch data (p 
    Matched MeSH terms: Technology
  14. Fulltext Waste Fiber-Based Poly(hydroxamic acid) Ligand for Toxic Metals Removal from Industrial Wastewater
    Rahman ML, Wong ZJ, Sarjadi MS, Joseph CG, Arshad SE, Musta B, et al.
    Polymers (Basel), 2021 May 06;13(9).
    PMID: 34066308 DOI: 10.3390/polym13091486
    Toxic metals in the industrial wastewaters have been liable for drastic pollution hence a powerful and economical treatment technology is needed for water purification. For this reason, some pure cellulosic materials were derived from waste fiber to obtain an economical adsorbent for wastewater treatment. Conversion of cellulose into grafting materials such as poly(methyl acrylate)-grafted cellulose was performed by free radical grafting process. Consequently, poly(hydroxamic acid) ligand was produced from the grafted cellulose. The intermediate products and poly(hydroxamic acid) ligand were analyzed by FT-IR, FE-SEM, TEM, EDX, and XPS spectroscopy. The adsorption capacity (qe) of some toxic metals ions by the polymer ligand was found to be excellent, e.g., copper capacity (qe) was 346.7 mg·g-1 at pH 6. On the other hand, several metal ions such as cobalt chromium and nickel also demonstrated noteworthy sorption capacity at pH 6. The adsorption mechanism obeyed the pseudo second-order rate kinetic model due to the satisfactory correlated experimental sorption values (qe). Langmuir model isotherm study showed the significant correlation coefficient with all metal ions (R2 > 0.99), indicating that the single or monolayer adsorption was the dominant mode on the surface of the adsorbent. This polymer ligand showed good properties on reusability. The result shows that the adsorbent may be recycled for 6 cycles without any dropping of starting sorption capabilities. This polymeric ligand showed outstanding toxic metals removal magnitude, up to 90-99% of toxic metal ions can be removed from industrial wastewater.
    Matched MeSH terms: Technology
  15. Fulltext Bleeding detection in wireless capsule endoscopy videos - Color versus texture features
    Pogorelov K, Suman S, Azmadi Hussin F, Saeed Malik A, Ostroukhova O, Riegler M, et al.
    J Appl Clin Med Phys, 2019 Aug;20(8):141-154.
    PMID: 31251460 DOI: 10.1002/acm2.12662
    Wireless capsule endoscopy (WCE) is an effective technology that can be used to make a gastrointestinal (GI) tract diagnosis of various lesions and abnormalities. Due to a long time required to pass through the GI tract, the resulting WCE data stream contains a large number of frames which leads to a tedious job for clinical experts to perform a visual check of each and every frame of a complete patient's video footage. In this paper, an automated technique for bleeding detection based on color and texture features is proposed. The approach combines the color information which is an essential feature for initial detection of frame with bleeding. Additionally, it uses the texture which plays an important role to extract more information from the lesion captured in the frames and allows the system to distinguish finely between borderline cases. The detection algorithm utilizes machine-learning-based classification methods, and it can efficiently distinguish between bleeding and nonbleeding frames and perform pixel-level segmentation of bleeding areas in WCE frames. The performed experimental studies demonstrate the performance of the proposed bleeding detection method in terms of detection accuracy, where we are at least as good as the state-of-the-art approaches. In this research, we have conducted a broad comparison of a number of different state-of-the-art features and classification methods that allows building an efficient and flexible WCE video processing system.
    Matched MeSH terms: Wireless Technology
  16. Fulltext Dispersive Liquid-Liquid Microextraction (DLLME) and LC-MS/MS Analysis for Multi-Mycotoxin in Rice Bran: Method Development, Optimization and Validation
    Salim SA, Sukor R, Ismail MN, Selamat J
    Toxins (Basel), 2021 04 15;13(4).
    PMID: 33920815 DOI: 10.3390/toxins13040280
    Rice bran, a by-product of the rice milling process, has emerged as a functional food and being used in formulation of healthy food and drinks. However, rice bran is often contaminated with numerous mycotoxins. In this study, a method to simultaneous detection of aflatoxins (AFB1, AFB2, AFG1, and AFG2), ochratoxin A (OTA), deoxynivalenol (DON), fumonisins (FB1 and FB2), sterigmatocystin (STG), T-2 toxin, HT-2 toxin, diacetoxyscirpenol (DAS) and zearalenone (ZEA) in rice bran was developed, optimized and validated using dispersive liquid-liquid microextraction (DLLME) and liquid chromatography-tandem mass spectrometry (LC-MS/MS). In DLLME, using a solvent mixture of methanol/water (80:20, v/v) as the dispersive solvent and chloroform as the extraction solvent with the addition of 5% salt improved the extraction recoveries (63-120%). The developed method was further optimized using the response surface methodology (RSM) combined with Box-Behnken Design (BBD). Under the optimized experimental conditions, good linearity was obtained with a correlation coefficient (r2) ≥ 0.990 and a limit of detection (LOD) between 0.5 to 50 ng g-1. The recoveries ranged from 70.2% to 99.4% with an RSD below 1.28%. The proposed method was successfully applied to analyze multi-mycotoxin in 24 rice bran samples.
    Matched MeSH terms: Green Chemistry Technology
  17. A review of disability EEG based wheelchair control system: Coherent taxonomy, open challenges and recommendations
    Al-Qaysi ZT, Zaidan BB, Zaidan AA, Suzani MS
    Comput Methods Programs Biomed, 2018 Oct;164:221-237.
    PMID: 29958722 DOI: 10.1016/j.cmpb.2018.06.012
    CONTEXT: Intelligent wheelchair technology has recently been utilised to address several mobility problems. Techniques based on brain-computer interface (BCI) are currently used to develop electric wheelchairs. Using human brain control in wheelchairs for people with disability has elicited widespread attention due to its flexibility.

    OBJECTIVE: This study aims to determine the background of recent studies on wheelchair control based on BCI for disability and map the literature survey into a coherent taxonomy. The study intends to identify the most important aspects in this emerging field as an impetus for using BCI for disability in electric-powered wheelchair (EPW) control, which remains a challenge. The study also attempts to provide recommendations for solving other existing limitations and challenges.

    METHODS: We systematically searched all articles about EPW control based on BCI for disability in three popular databases: ScienceDirect, IEEE and Web of Science. These databases contain numerous articles that considerably influenced this field and cover most of the relevant theoretical and technical issues.

    RESULTS: We selected 100 articles on the basis of our inclusion and exclusion criteria. A large set of articles (55) discussed on developing real-time wheelchair control systems based on BCI for disability signals. Another set of articles (25) focused on analysing BCI for disability signals for wheelchair control. The third set of articles (14) considered the simulation of wheelchair control based on BCI for disability signals. Four articles designed a framework for wheelchair control based on BCI for disability signals. Finally, one article reviewed concerns regarding wheelchair control based on BCI for disability signals.

    DISCUSSION: Since 2007, researchers have pursued the possibility of using BCI for disability in EPW control through different approaches. Regardless of type, articles have focused on addressing limitations that impede the full efficiency of BCI for disability and recommended solutions for these limitations.

    CONCLUSIONS: Studies on wheelchair control based on BCI for disability considerably influence society due to the large number of people with disability. Therefore, we aim to provide researchers and developers with a clear understanding of this platform and highlight the challenges and gaps in the current and future studies.

    Matched MeSH terms: Wireless Technology
  18. Fulltext Microwave-Assisted Brine Extraction for Enhancement of the Quantity and Quality of Lipid Production from Microalgae Nannochloropsis sp
    Zghaibi N, Omar R, Kamal SMM, Biak DRA, Harun R
    Molecules, 2019 Oct 04;24(19).
    PMID: 31590304 DOI: 10.3390/molecules24193581
    Toward attaining a sustainability and eco-friendly process, a green and low-cost solvent-brine (NaCl solution) is proposed, as microwave-assisted extraction (MAE) technique solvent to extract lipids from microalgae Nannochloropsis sp. The effect of NaCl concentration on the quantity and quality of the extracted lipid was assessed, while MAE parameters were optimized using response surface methodology (RSM). The content of fatty acid methyl esters (FAMEs) in the lipid was analyzed by using a gas chromatography-flame ionization detector (GC/FID). The highest lipid yield (16.1%) was obtained using 10% (w/v) brine at optimum extraction parameters of 5% (w/v) solid loading, 100 °C, and 30 min. The lipid extraction yield via optimized MAE-brine technique was thrice better than that Soxhlet extraction did and only 2% less than Bligh and Dyer (B&D) lipid extraction, which utilized harmful solvents. The proposed MAE-brine technique offered better quality lipids containing the highest amount of polyunsaturated fatty acids (PUFA) (44.5%) and omega-3 fatty acids (FAs) (43%). Hence, the MAE-brine solvent technique appears to be a promising extraction method for cheaper, greener, and faster extraction of a high-quality lipid for specialty food applications.
    Matched MeSH terms: Green Chemistry Technology
  19. Fulltext Effectiveness of lumbar support with built-in massager system on spinal angle profiles among high-powered traffic police motorcycle riders: A randomised controlled trial
    Mohammad Yusof NAD, Karupiah K, Mohd Tamrin SB, Rasdi I, How V, Sambasivam S, et al.
    PLoS One, 2021;16(10):e0258796.
    PMID: 34665845 DOI: 10.1371/journal.pone.0258796
    Traffic police riders are exposed to prolonged static postures causing significant angular deviation of the musculoskeletal, including the lumbar angle (L1-L5). This postural alteration contributes to awkward posture, musculoskeletal disorders and spinal injury, especially in the lower back area, as it is one of the most severe modern diseases nowadays. Thus, the study aimed to evaluate the effect of lumbar support with a built-in massager system on spinal angle profiles among traffic police riders. A randomised controlled trial (pre-testpost-test control design) was used to assess spinal angle pattern while riding the high-powered motorcycle for 20 minutes. Twenty-four traffic police riders were randomly selected to participate and 12 riders were assigned to the control group and 12 riders to the experimental group. The pre-test and post-test were conducted at a one-week interval. Each participant was required to wear a TruPosture Smart Shirt (to monitor spinal posture). The TruPosture Apps recorded the spinal angle pattern. The data indicated that the police riders using motorcycle seat with lumbar support and built-in massager system showed a huge improvement in maintaining posture which only involves slight spinal angle deviation changes from the spinal reference angle throughout the 20 minutes ride. The data collected then were analysed using the Mann-Whitney test and Wilcoxon signed-ranked test to verify a statistically significant difference between and within the control and experimental groups. There were significant differences in all sensors between the control group and experimental groups (p<0.05) and within the experimental group. According to the findings, it can be said that the ergonomic intervention prototype (lumbar support with built-in massager system) successfully helps to maintain and improve the natural curve of the spinal posture. This indirectly would reduce the risk of developing musculoskeletal disorders and spinal injury among traffic police riders.
    Matched MeSH terms: Wireless Technology
  20. Fulltext Performance of Green Surfactants in the Formulation of Heavy-Duty Laundry Liquid Detergents (HDLD) with Special Emphasis on Palm Based Alpha Methyl Ester Sulfonates (α-MES)
    Low SY, Tan JY, Ban ZH, Siwayanan P
    J Oleo Sci, 2021 Aug 05;70(8):1027-1037.
    PMID: 34248098 DOI: 10.5650/jos.ess21078
    Liquid detergent has an increasing demand in North America, Western Europe, and Southeast Asia countries owing to its convenience to use and efficiency to clean. Alpha methyl ester sulfonates (α-MES), an anionic surfactant derived from palm oil based methyl ester, was reported to have lower manufacturing cost, good detergency with less dosage, excellent biodegradability, higher tolerance to hard water, and lower eco-toxicity as compared to linear alkylbenzene sulfonates (LABS). LABS was known as the workhorse of the detergent industry in the 20th century. Although palm-based α-MES was successfully used as the sole surfactant in powder detergent, there are still some unsettled technical issues related to phase stability and viscosity when using this anionic surfactant in heavy-duty laundry liquid detergent formulations. This paper will review not only the market overview of detergents, the application and performance of green surfactants in laundry detergents but also will highlight the technical issues related to the application of palm-based α-MES in laundry liquid detergent and some of the possible methods to overcome the formulation adversities.
    Matched MeSH terms: Green Chemistry Technology
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links