Displaying publications 81 - 100 of 135 in total

Abstract:
Sort:
  1. Adib Asmawi Mohd Yusoff, Irniza Rasdi, Ahmed S. Mahmoud Ben Hameid, Karmegam Karuppiah
    MyJurnal
    Ergonomic is important in classroom. Sitting for protracted period in class may lead students to develop musculoskeletal disorders. Their physical health and performance in the class may increase by designing school furniture that match with human body. In Malaysia, there is a lack of ergonomic assessment for school environment especially in urban areas. The aim of this study is to determine the mismatch between the furniture dimension and anthropometric parameters among primary school children in Putrajaya. This is a cross-sectional study which involved 100, Year 1 and Year 6 primary school students randomly selected in Putrajaya. Five anthropometric measurements (popliteal height, buttock popliteal length, elbow height, shoulder height (sitting), hip breadth) as well as five furniture dimensions (seat height, seat depth, seat width, backrest height and seat to desk height) were measured. Instrument used is Martin type anthropometer set, SECA body meter, and SECA weighing scale. Calculation for determining mismatch between the furniture and anthropometric measures were calculated using a standard mismatch formula. There was 100% mismatch for seat height, seat depth, and seat to seat to desk height for Year 1. As for Year 6, mismatch was reported 100% for backrest height and seat to desk height. There were significance difference for parameters of popliteal height between Year 1 and Year 6 and between male and female of Year 1. There was a presence of mismatch between furniture dimension and children anthropometric measurement. Proposed dimension of furniture shows decrease in percentage of mismatch for the most parameter of anthropometric measurement.
    Matched MeSH terms: Shoulder
  2. Ezrin Hani Sukadarin, Baba Md Deros, Jaharah A. Ghani, Ahmad Rasdan Ismail, Nur Syazwani Mohd Nawi, Norhidayah Abdull
    MyJurnal
    Validity test is important during the development of ergonomics measurement. Failure to conduct validity tests will result in the measurement method being developed to be incapable of providing reliable ergonomics measurements. The objective of this study is to conduct validity test on the simple method ergonomics measurement which was developed. The method named Simple Ergonomics Risks Assessment (SERA). Content validity test and criterion validity test were conducted. The content validity test consists of 6 ergonomics experts who actively provide inputs and positive feedbacks to improve the measurement method being developed. Meanwhile, the criterion validity test involves data collection of complaints on body parts among oil palm workers which were derived from Nordic Musculoskeletal Questionnaire (NMQ) and ergonomics risk assessment scores obtained from SERA. Both findings were tested with the Chi-square test to explore possible relations between the two findings. Results from the test conducted showed that there are significant relations in the scores of neck posture; hip, right and left shoulder, right and left wrists and the right hand associated with fresh fruit bunch (FFB) harvesting activities. In the loose fruits collection, the Chi-square test showed significant relations in the scores of neck posture, hip, right and left shoulders, right wrist, right arm and the left hand. However, there are body parts such as the legs which showed no significant relation. More tests should be conducted to further explore the validity of the method being developed. Findings from both validity tests show that SERA were verified by the experts and tested with validated method so that it is valid to be applied in the future.
    Matched MeSH terms: Shoulder
  3. Hanani Yuhaniz, Asnawi Seraila, Suhaimi Muhammed, Abdul Hamid Saleh
    MyJurnal
    This study on anthropometrics of Primary School children from grade 1 to 5 in Peninsular Malaysia involves 2310 students aged seven to eleven years old. The objectives were to analyze the differentiation of anthropometrics between children of grades 1 to 5 and grouping them to suitable levels in which they are appropriate to propose chair dimensions. A multi-stage sampling method was used, and rural and urban areas were also included in providing anthropometric database that represents the whole Peninsular Malaysia population. There were six dimensions measured in this study, which are sitting shoulder, sitting subscapular height, sitting elbow height, hip width, buttock-popliteal length and popliteal height. All the measurements were chosen to represent dimensions needed to construct ergonomic school chair. From the results, ANOVA showed p-values of
    Matched MeSH terms: Shoulder
  4. Nasir Mohd Nizlan, Azfar Rizal Ahmad, Hisham Abdul Rashid, Paisal Hussin, Che Hamzah Fahrudin, Abdullah Arifaizad, et al.
    MyJurnal
    Introduction: Degenerative disorder involving the acromioclavicular
    joint (ACJ) is quite common especially in the elderly.
    One of the surgical modalities of treatment of this disorder is the
    Mumford Procedure. Arthroscopic approach is preferred due to
    its reduced morbidity and faster post-operative recovery. One
    method utilizes the anteromedial and Neviaser portals, which
    allow direct and better visualization of the ACJ from the
    subacromial space. However, the dangers that may arise from
    incision and insertion of instruments through these portals are
    not fully understood. This cadaveric study was carried out to
    investigate the dangers that can arise from utilization of these
    portals and which structures are at risk during this procedure.
    Methods: Arthroscopic Mumford procedures were performed
    on 5 cadaver shoulders by a single surgeon utilizing the
    anteromedial and Neviaser portals. After marking each portals
    with methylene blue, dissection of nearby structures were
    carried out immediately after each procedure was completed.
    Important structures (subclavian artery as well as brachial plexus
    and its branches) were identified and the nearest measurements
    were made from each portal edges to these structures. Results:
    The anteromedial portal was noted to be closest to the
    suprascapular nerve (SSN) at 2.91 cm, while the Neviaser portal
    was noted to be closest also to the SSN at 1.60 cm. The
    suprascapular nerve was the structure most at risk during the
    Mumford procedure. The anteromedial portal was noted to be
    the most risky portal to utilize compared to the Neviaser portal.
    Conclusion: Extra precaution needs to be given to the
    anteromedial portal while performing an arthroscopic distal
    clavicle resection in view of the risk of injuring the
    suprascapular nerve of the affected limb.
    Matched MeSH terms: Shoulder
  5. Kadhim Jawad Obaid, Yahya Mohammad Arpine, Nor Salmah Bakar, Marlina Tanty Ramli Hamid, Ahmed Ramzi Yusof
    MyJurnal
    Intramuscular shoulder angiomyolipomas are very rare. We report a case in a 22-year-old male with a well circumscribed lesion located on the back of the shoulder. This lesion, differs from renal angiomyolipoma in terms of non-association with tuberous sclerosis, circumscription and male predominance. Another characteristic feature is the absence of epithelioid cells. Differential diagnosis includes lipoma, angiolipoma, angioleiomyoma, hemangioma, myolipoma and liposarcoma. It is distinguished from the above mentioned entities by the presence of a combination of thick-walled blood vessels, smooth muscle and fat.
    Matched MeSH terms: Shoulder
  6. Miswan MF, Saman MS, Hui TS, Al-Fayyadh MZ, Ali MR, Min NW
    J Orthop Surg (Hong Kong), 2017 01;25(1):2309499017690317.
    PMID: 28215115 DOI: 10.1177/2309499017690317
    INTRODUCTION: We conducted a study to elucidate the correlation between the anatomy of the shoulder joint with the development of rotator cuff tear (RCT) and glenohumeral osteoarthritis (GHOA) by using acromioglenoid angle (AGA).

    MATERIALS AND METHODS: The AGA is a new measured angle formed between the line from midglenoid to lateral end of the acromion with the line parallel to the glenoid surface. The AGA was measured in a group of 85 shoulders with RCT, 49 with GHOA and 103 non-RCT/GHOA control shoulders. The AGA was compared with other radiological parameters, such as, the critical shoulder angle (CSA), the acromion index (AI) and the acromiohumeral interval (AHI). Correlational and regression analysis were performed using SPSS 20.

    RESULTS: The mean AGA was 50.9° (45.2-56.5°) in the control group, 53.3° (47.6-59.1°) in RCT group and 45.5° (37.7-53.2°) in OA group. Among patients with AGA > 51.5°, 61% were in the RCT group and among patients with AGA < 44.5°, 56% were in OA group. Pearson correlation analysis had shown significant correlation between AGA and CSA ( r = 0.925, p < 0.001). It was also significant of AHI in RCT group with mean 6.6 mm (4.7-8.5 mm) and significant AI in OA group with mean 0.68 (0.57-0.78) with p value < 0.001 respectively.

    CONCLUSION: The AGA method of measurement is an excellent predictive parameter for diagnosing RCT and GHOA.

    Matched MeSH terms: Shoulder Joint*
  7. Ng BW, Abdullah AF, Nadarajah S
    Malays Orthop J, 2017 Mar;11(1):57-59.
    PMID: 28435576 MyJurnal DOI: 10.5704/MOJ.1703.003
    Acromioclavicular joint (ACJ) dissociation is one of the common injuries affecting adults. The stability of ACJ largely depends on the integrity of acromioclavicular ligament, coracoclavicular ligament, capsule, trapezius muscle and deltoid muscle. The injury has been classified by Rockwood into six types and treatment options can be guided by the classification. TightRope fixation is one of the many surgical procedures available to address acromioclavicular joint separation. It consists of tensioning of a no. 5 Fibrewire suture secured at both ends to low-profile metallic buttons. Despite various advantages of using this technique, complications such as suture cut-out, clavicle fracture and suture failure have been documented. The author presents a case of a type III acromioclavicular joint dissociation treated with TightRope which suture cutout was noted intra-operatively. Decision to amend the fixation using a cut one-third tubular plate as an additional anchor for the metallic button on the clavicle was made. Patient's progress was evaluated using the University of California at Los Angeles Shoulder Score (UCLA Shoulder Score) and significant improvement was noted six months post operatively. We propose this technique as a solution to the encountered problem.
    Matched MeSH terms: Shoulder; Shoulder Fractures
  8. Sharma A, Jindal S, Narula MS, Garg S, Sethi A
    Malays Orthop J, 2017 Mar;11(1):74-76.
    PMID: 28435581 DOI: 10.5704/MOJ.1703.011
    The incidence of bilateral gleno-humeral joint dislocation is rare, is almost always posterior and is usually caused by sports injuries, epileptic seizures, electrical shock, or electroconvulsive therapy. Bilateral fracture-dislocation is even rarer, with a few cases reported in the literature. We report an unusual case with dislocation of the both glenohumeral joints in opposite direction after a seizure episode, with fracture of greater tuberosity on one side and of the lesser tuberosity on the contralateral side. Although there have been a few reports of bilateral asymmetric fracture dislocations of the shoulder in the past, an injury pattern resembling our case has, to the best of our knowledge, not been described in the literature so far. This report includes a detailed discussion regarding the mechanism of injury in a case of asymmetrical dislocation following a seizure episode. At final follow-up, the patient had healed fractures, painless near normal range of motion with no redislocations.
    Matched MeSH terms: Shoulder; Shoulder Joint
  9. Imma II, Nizlan NM, Ezamin AR, Yusoff S, Shukur MH
    Malays Orthop J, 2017 Jul;11(2):30-35.
    PMID: 29021876 MyJurnal DOI: 10.5704/MOJ.1707.012
    Introduction: The aims of this study are to define the coracoid process anatomy in a Malaysian population, carried out on patients in Hospital Serdang with specific emphasis on the dimension of the base of coracoid process which is important in coraco-acromial (CC) ligament reconstruction, to define the average amount of bone available for use in coracoid transfer, and to compare the size of coracoid process based on gender and race, and with findings in previous studies. Materials and Methods: Fifteen pairs of computed tomography (CT) based 3-dimensional models of shoulders of patients aged between 20 to 60 years old were examined. The mean dimensions of coracoid were measured and compared with regards to gender and race. The data were also compared to previously published studies. Results: The mean length of the coracoid process was 37.94 ± 4.30 mm. Male subjects were found to have larger-sized coracoids in all dimensions as compared to female subjects. The mean tip of coracoid dimension overall was 19.99 + 1.93mm length × 10.03 + 1.48mm height × 11.63 + 2.12mm width. The mean base of coracoid dimension was 18.96 + 3.71mm length × 13.84 + 1.76mm width. No significant differences were observed with regards to racial denomination. The overall coracoid size measurements were found to be smaller compared to previous studies done on the Western population. Conclusion: This study may suggest that Malaysians have smaller coracoid dimension compared to Caucasians. The findings further suggest that the incidence of coracoid fracture and implants pull out in Malaysian subjects may be higher.
    Matched MeSH terms: Shoulder
  10. Ogawa T, Sasaki T, Masayuki-Kawashima MK, Okawa A, Mahito-Kawashima MK
    Malays Orthop J, 2017 Nov;11(3):47-49.
    PMID: 29326767 DOI: 10.5704/MOJ.1711.003
    Bipolar segmental clavicle fractures are simultaneous clavicle fractures of both proximal and distal ends. Few case reports describing these fractures have been published, and the management of these injuries have remained controversial. Non-operative treatment is likely to result in poor shoulder function due to the instability of the fracture in patients with high physical demands. In contrast, surgical treatment with fixation of both proximal and distal ends of the clavicle possibly may cause life-threatening complications. We present a 74-year old female farmer who had injured her left shoulder and was diagnosed with a bipolar segmental clavicle fracture. Taking the fracture mechanism into consideration, we surgically treated only the distal end of the clavicle fracture with a locking plate. The proximal end of the clavicle fracture was treated without surgical intervention. Both fracture sites achieved bony union after four months and she returned to her activities as a farmer. Quick DASH score was 5.0 with excellent results at three years after operation.
    Matched MeSH terms: Shoulder; Shoulder Fractures
  11. Zamri EN, Moy FM, Hoe VC
    PLoS One, 2017;12(2):e0172195.
    PMID: 28234933 DOI: 10.1371/journal.pone.0172195
    BACKGROUND: Musculoskeletal pain is common among teachers. Work-related psychosocial factors are found to be associated with the development of musculoskeletal pain, however psychological distress may also play an important role.

    OBJECTIVES: To assess the prevalence of self-reported low back pain (LBP), and neck and/or shoulder pain (NSP) among secondary school teachers; and to evaluate the association of LBP and NSP with psychological distress and work-related psychosocial factors.

    METHODS: This was a cross-sectional study conducted among teachers in the state of Penang, Malaysia. The participants were recruited via a two stage sampling method. Information on demographic, psychological distress, work-related psychosocial factors, and musculoskeletal pain (LBP and NSP) in the past 12 months was collected using a self-administered questionnaire. Poisson regression was used to estimate the prevalence ratio (PR) for the associations between psychological distress and work-related psychosocial factors with LBP and NSP.

    RESULTS: The prevalence of self-reported LBP and NSP among 1482 teachers in the past 12 months was 48.0% (95% Confidence Interval (CI) 45.2%, 50.9%) and 60.1% (95% CI 57.4%, 62.9%) respectively. From the multivariate analysis, self-reported LBP was associated with teachers who reported severe to extremely severe depression (PR: 1.71, 95% CI 1.25, 2.32), severe to extremely severe anxiety (1.46, 95% CI 1.22, 1.75), high psychological job demand (1.29, 95% CI 1.06, 1.57), low skill discretion (1.28, 95% CI 1.13, 1.47) and poorer mental health (0.98, 95% CI 0.97, 0.99). Self-reported NSP was associated with mild to moderate anxiety (1.18, 95% CI 1.06, 1.33), severe to extremely severe anxiety (1.25, 95% CI 1.09, 1.43), low supervisory support (1.13, 95% CI 1.03, 1.25) and poorer mental health (0.98, 95% CI 0.97, 0.99).

    CONCLUSIONS: Self-reported LBP and NSP were common among secondary school teachers. Interventions targeting psychological distress and work-related psychosocial characteristics may reduce musculoskeletal pain among school teachers.

    Matched MeSH terms: Shoulder Pain
  12. Awang, M.S., Abdul Razak, A.H., Che Ahmad, A., Mohd Rus, R.
    MyJurnal
    Introduction: The purpose of this study is to identify the incidence of clavicle fractures in newborn
    associated with fetal, maternal and process of deliveries in Kuantan General Hospital from June 2012 until
    January 2014. This study is to determine epidemiological data of clavicle fractures, maternal and baby risk
    factors associated with clavicle fractures of newborn and its’ outcome.

    Methods: This is a prospective
    study. 13 patients were identified to fulfill the inclusion criteria of the study. The data of
    sociodemographic, associated fetal and maternal risk factors and the outcomes were recorded using
    proforma. The statistical data analysis was done using SPSS 12.0.

    Results: Out of 20,257 live births at our
    centre during the study period, 13 infants were diagnosed to have clavicle fractures, giving an incidence of
    0.64 per 1000 live births. There were 5 (38.5%) left, 7 (53.8%) right and one (7.7%) bilateral fracture. All
    fractures located at the mid shaft of the clavicle and none have associated brachial plexus injuries. All
    infants were delivered through vaginal delivery (61.5%); five through assisted delivery (instrumental); 2
    (15.4%) forcep and 3 (23.1%) vacuum. Two of the babies developed shoulder dystocia. The average birth
    weight was 3371 grams (SD 0.269) and mean gestational age was 38.7 weeks (SD 1.16). Five of the mothers
    (38.5%) were primigravida and eight (61.5%) were multigravida in which,7 (53.8%)were healthy without
    other co-morbidty, 5 (38.5%) having gestational diabetis and one (7.7%) hypertension. The average maternal
    weight was 62.0 kg and height 1.58 metres with average BMI of 24.16 (3.29SD). All eventually had a
    complete recovery at 6 weeks with clinical and radiological evident of fracture union.

    Conclusions: In
    conclusion, all patients with clavicle fractures were found following vaginal delivery. There were no
    associations between neonatal clavicle fractures with maternal or baby risk factors. All fractures healed
    without any complications.
    Matched MeSH terms: Shoulder
  13. Hazwan Ab. Wahid, Khairul Nizam bin Siron, Ahmad Zakiran
    MyJurnal
    Displaced and unstable proximal humerus fractures are difficult to treat
    and they have high morbidity. The main goal is to achieve painless shoulder with full
    recovery of the shoulder joint motion. Impingement syndrome is one of the commonest
    postoperative complication. This study aim is to appreciate the functional outcomes of
    Philos-plate fixation for proximal humerus fractures and to establish association with
    high plate positioning with impingement syndrome of the shoulder after Philos-plate
    fixation. (Copied from article).
    Matched MeSH terms: Shoulder; Shoulder Fractures; Shoulder Joint
  14. Khairul Nizam Siron, Lim, Chia Hua
    MyJurnal
    Neer first popularised the use of primary hemiarthroplasty to treat complex proximal
    humerus fractures, especially when the humeral head is nonviable or not
    reconstructable with internal fixations, and with younger patients. (Copied from article).
    Matched MeSH terms: Shoulder Fractures
  15. Madhwani KP, Nag PK
    Indian J Occup Environ Med, 2017 Jan-Apr;21(1):18-22.
    PMID: 29391743 DOI: 10.4103/ijoem.IJOEM_145_17
    Aims: The purpose of this study was to evaluate web-based Knowledge, Attitude and Practice (KAP) intervention on office ergonomics - a unique method for prevention of musculoskeletal discomfort (MSD) - in corporate offices that influences behavior modification.

    Background: With the increasing use of computers, laptops and hand-held communication devices globally among office employees, creating awareness on office ergonomics has become a top priority. Emphasis needs to be given on maintaining ideal work postures, ergonomic arrangement of workstations, optimizing chair functions, as well as performing desk stretches to reduce MSD arising from the use of these equipment, thereby promoting safe work practices at offices and home, as in the current scenario many employees work from home with flexible work hours. Hence, this justifies the importance of our study.

    Objective: To promote safe working by exploring cost-effective communication methods to achieve behavior change at distant sites when an on-site visit may not be feasible.

    Materials and Methods: An invitation was sent by the Medical and Occupational Health Team of a multinational corporation to all employees at their offices in Sri Lanka, Singapore, and Malaysia to take up an online Nordic questionnaire, a screening tool for musculoskeletal symptoms, shared in local languages on two occasions - baseline evaluation (n = 240) and a follow-up evaluation after 3 months (n = 203). After completing the baseline questionnaire, employees were immediately trained on correct postures and office ergonomics with animation graphics. The same questionnaire was sent again after a 12-week gap only to those employees who responded to the baseline questionnaire on initial assessment.

    Statistical Analysis Used: Data collected were analyzed using the Statistical Package for the Social Sciences (SPSS) version 20.0 software and variables were compared using odds ratio as well as Chi-square test.

    Results: Of the 203 employees who responded, 47.35% had some musculoskeletal symptoms. Among them 58.7% had lower back pain, 46.9% had upper back pain, 44.1% had wrist pain, 39.5% had shoulder pain, and 37% had knee pain. The percentages are high as some participants had multiple complaints i.e. 2 or 3 complaints. However, only 40% of these employees had ongoing symptoms at the time of evaluation (past 7 days). A subsequent 3-month evaluation after web-based intervention showed a significant 41-50% decline in ongoing symptoms.

    Conclusions: We conclude that newer technology using web-based animation graphics is a highly efficient technique to create office ergonomics awareness and has the potential to become a best practice in countries where language is a communication barrier and an on-site visit may not be feasible due to meagre resources.
    Matched MeSH terms: Shoulder Pain
  16. Kapil-Mani KC, Acharya P, Arun S
    Malays Orthop J, 2018 Mar;12(1):15-20.
    PMID: 29725507 DOI: 10.5704/MOJ.1803.003
    Introduction: Various treatment modalities are available but no consensus has been reached for optimal treatment of lateral third clavicle fractures. Precontoured locking plates with broad lateral end for multiple screws fixation is a newly designed plate for lateral third clavicle fractures. The objective of our study was to analyse the functional outcomes as well as complications of this technique in a significant number of cases with long follow-up duration. Materials and Methods: Forty-six patients with distal third clavicle fractures were treated by precontoured clavicular locking plate with broad lateral end. Functional outcomes were assessed on the basis of Constant-Murley Shoulder Outcome Score and University of California, Los Angeles (UCLA) Shoulder Rating Score, active shoulder range of motion, time for fracture union and coraco-clavicular distance. Results: The mean Constant-Murley score was 92.56±4.47 (range: 79-98) for injured side and 96.22±2.23 (range: 90-100) for normal side with p-Value 0.56. Mean coraco-clavicular distance at final follow-up was 10.52±1.13 mm (range 9.7 to 11.7 mm) in injured side and 10.25±0.98 mm (range 9.6 to 11.2 mm) in normal side. Mean UCLA Shoulder Rating Score was 32.55±2.12 (range: 27-34) for injured side and 33.46±1.88 (range: 31- 35) on normal side with p value 0.58. No major complications that necessitated revision of surgery occurred in our study. Conclusion: This newly designed plate seemed extremely useful in successful union of lateral third clavicle fractures, with reduced rate of complications like fixation failures, iatrogenic rotator cuff injury, AC joint osteoarthritis and sub-acromial bursitis, with good functional outcomes.
    Matched MeSH terms: Shoulder
  17. Kurnaz R, Ikizler M, Ozbayburtlu M, Gunes T
    Malays Orthop J, 2018 Mar;12(1):51-53.
    PMID: 29725515 DOI: 10.5704/MOJ.1803.012
    Proximal humerus fracture is a common arm trauma and rarely occurs with vascular injury which however is a serious complication. In this case report, we present a long segment dissection of the axillary and brachial arteries as a rare complication due to fragmented proximal humerus fracture and shoulder dislocation. An 80-year old female patient was seen at the emergency department. Radiograph examination has revealed a fragmented proximal humerus fracture besides dislocation of the head of humerus towards the axillary area. On vascular examination, acute arterial occlusion such as absence of radial and ulnar pulses were observed in her left hand. The patient was immediately taken to the operating room. The dissection included the entire segment approximately 20cm between the distal subclavian artery and the distal brachial artery. This injured segment was removed and a 6mm Polytetrafluroethylene (PTFE) graft with rings was interpositoned between subclavian and brachial arteries. This case is a rarity because of such a significant complication after a small injury. Axillary artery injuries caused by humeral neck fractures are rare but should not be missed by the physician.
    Matched MeSH terms: Shoulder Dislocation; Shoulder Fractures
  18. Bajuri MY, Boon HW
    Malays Orthop J, 2018 Mar;12(1):60-62.
    PMID: 29725518 MyJurnal DOI: 10.5704/MOJ.1803.015
    Bilateral clavicle fractures are not frequently seen. To treat these injuries surgically or non-surgically is still a debatable issue. Implant option for surgical management is also in doubt. We would like to share our experience in treating a patient with bilateral clavicle fracture surgically. He had excellent outcomes in terms of function and radiology. Surgical option for bilateral clavicle fractures promises excellent outcome in terms of early rehabilitation and return in function.
    Matched MeSH terms: Shoulder Fractures
  19. Ho W, Lin Seow L, Musawi A
    J Clin Transl Res, 2018 May 28;4(1):70-74.
    PMID: 30873496
    Background: The purpose of the present study was to investigate the effect of different viscosities of polyvinyl siloxane (PVS) impression materials on the accuracy of the stone die produced.

    Methods: A three-unit bridge master model was fabricated using cold-cure acrylic resin. Four combinations of different viscosities of PVS impression materials - regular body (monophase) alone, light body with regular body, light body with heavy body, and light body with putty - were used to make an impression of the master model. Ten impressions from each group were taken and Type IV gypsum stone was used to generate the dies. The dies were measured at the inter-abutment distance, occlusogingival length, and shoulder width with a measuring microscope and were compared with the master model using one-way analysis of variance and Tukey (honest significant difference) test.

    Results: Differences were found for inter-abutment distance between the master model and the light body with regular body and light body with putty dies (both P < 0.02). A difference was found for shoulder width between the master model and the regular body alone die (P = 0.01). No differences were found for occlusogingival distance (all P > 0.08).

    Conclusion: Results suggested inter-abutment distance was most accurate when using a PVS light body combination. Occlusogingival length was accurate using any of the studied PVS combinations, and shoulder width was more accurate when using the regular body PVS.

    Relevance for patients: These results should be considered when choosing the viscosity of the PVS to use for producing impressions of high accuracy and fabricating a well-fitting fixed prosthesis.

    Matched MeSH terms: Shoulder
  20. Ganeshan M, Bujang MA, Soelar SA, Karalasingam SD, Suharjono H, Jeganathan R
    J Obstet Gynaecol India, 2018 Jun;68(3):173-178.
    PMID: 29895995 DOI: 10.1007/s13224-017-1000-9
    Aims: The aim of this study is to compare obstetric outcomes between overweight and class 1 obesity among pregnant women in their first pregnancy based on WHO's BMI cut-offs and the potential public health action points identified by WHO expert consultations specific for high-risk population such as Asians.

    Methods: This is a retrospective cohort review of data obtained from the Malaysian National Obstetrics and Gynaecology Registry between the year 2010 and year 2012. All women in their first pregnancy with a booking BMI in their first trimester were included in this study. The association between BMI classifications as defined by the WHO cut-offs and the potential public health action points identified by WHO expert consultations towards adverse obstetric outcomes was compared.

    Results: A total of 88,837 pregnant women were included in this study. We noted that the risk of adverse obstetric outcomes was significantly higher using the public health action points identified by WHO expert consultations even among the overweight group as the risk of stillbirths was (OR 1.2; 95% CI 1.0,1.4), shoulder dystocia (OR 1.9; 95% CI 1.2,2.9), foetal macrosomia (OR 1.8; 95% CI 1.6,2.0), caesarean section (OR 1.9; 95% CI 1.8,2.0) and assisted conception (OR 1.9; 95% CI 1.6,2.1).

    Conclusion: A specifically lower BMI references based on the potential public health action points for BMI classifications were a more sensitive predictor of adverse obstetric outcomes, and we recommend the use of these references in pregnancy especially among Asian population.

    Matched MeSH terms: Shoulder
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links