The study of cohesive sediment in the laboratory gives rise to a number of instrumentation problems, especially in the location of mud bed, fluid mud and hindered settling layers and in the measurement of flow velocities. This paper describes the application of medical diagnostic ultrasound technique in the cohesive sediment study conducted at the University of Liverpool, United Kingdom. This paper illustrates that the use of ultrasound technique creates a reasonably flexible environment for the study of fluid mud phenomenon in which bed formation and flow velocities can be measured easily, accurately and non-intrusively. This in turn will assist in development of computer models to predict the environmental impact, siltation rates and dredging requirements in both new and existing ports and harbour developments.
Kajian endapan berjeleket di dalam makmal mengalami pelbagai masalah peralatan, terutamanya bagi menentukan lokasi dasar lumpur, pengenapan terhalang dan pengukuran halaju aliran. Dalam makalah ini diterangkan penggunaan teknologi diagnosis perubatan ultrabunyi dalam kajian endapan berjeleket, yang dijalankan di University of Liverpool, United Kingdom. Ditunjukkan bahawa penggunaan teknologi ultrabunyi keadaan yang begitu boleh suai bagi kajian fenomenon lumpur yang pembentukan dasar dan halaju aliran dapat diukur dengan mudah, tepat dan tanpa gangguan. lni seterusnya dapat membantu di dalam pembangunan model komputer bagi menjangka kesan sekitaran, kadar enapan dan keperluan mengorek bagi pembangunan kawasan pelabuhan baru dan sedia ada.
The changes on the vegetables oil trading environment might change the foundation of palm oil pricing and induce a structural change to the price model. Failing to take it account the structural change in a data series might lead to misspecification of the actual model. This study, however, showed that structural change was not present in the monthly, January 1983 to July 1995, palm oil price, but it was present on the unconditional variance. The underlying model of this series was ARIMA (3, 1, 0) with ARCH (1). The critical change of the unconditional variance took place in April 1989.
Perubahan dalam suasana perdagangan minyak sayuran boleh mengubah asas harga minyak kelapa sawit. Seterusnya ia merangsang perubahan dalam struktur model harga minyak tersebut. Kegagalan untuk mengambil kira perubahan struktur dalam siri data menjadikan model itu tidak menepati spesifikasi daripada model sebenar. Kajian ini mendapati bahawa perubahan struktur tidak berlaku bagi data harga minyak sawit dari Januari 1983 hingga Julai 1995. Tetapi perubahan berlaku pada varians tidak bersyaratnya. Model asas bagi siri ini adalah ARIMA (3,1,0) dengan ARCH(1). Didapati juga bahawa perubahan yang kritikal bagi varians tidak bersyarat berlaku pada bulan April 1989.
The use of environmental planning tools for optimum solid waste landfill siting taking into account all environmental implications was carried out by applying Life Cycle Analysis (LCA) to enhance the research information obtained from initial analysis using Geographical Information Systems (GIS). The objective of this study is to identify the most eco-friendly landfill site by conducting a LCA analysis upon 5 potential GIS generated sites which incorporated eleven important criteria related to the social, environmental, and economical factors. The LCA analysis utilized the daily distance covered by collection trucks among the 5 selected landfill sites to generate inventory data on total energy usage for each landfill sites. The planning and selection of the potential sites were facilitated after conducting environmental impact analysis upon the inventory data which showed the least environmental impact.
Time stepping algorithm with spatial parallelisation is commonly used to solve time dependent partial differential equations. Computation in each time step is carried out using all processors available before sequentially advancing to the next time step. In cases where few spatial components are involved and there are relatively many processors available for use, this will result in fine granularity and decreased scalability. Naturally one alternative is to parallelise the temporal domain. Several time parallelisation algorithms have been suggested for the past two decades. One of them is the pipelined iterations across time steps. In this pipelined time stepping method, communication however is extensive between time steps during the pipelining process. This causes a decrease in performance on distributed memory environment which often has high message latency. We present a modified pipelined time stepping algorithm based on delayed pipelining and reduced communication strategies to improve overall execution time on a distributed memory environment using MPI. Our goal is to reduce the inter-time step communications while providing adequate information for the next time step to converge. Numerical result confirms that the improved algorithm is faster than the original pipelined algorithm and sequential time stepping algorithm with spatial parallelisation alone. The improved algorithm is most beneficial for fine granularity time dependent problems with limited spatial parallelisation.
The present study evaluates the petroleum source rock generation potential of the Neogene Bhuban shales from Bangladesh.
Organic geochemical and organic petrological methods were used for analyzing 11 drill core samples from 4 gas fields
in the basin. Source rock potential, maceral composition, organic matter abundance, biomarker distribution, thermal
maturity, hydrocarbon generation and depositional environment were evaluated. Kerogen in the studied shale samples
is classified mainly as Type III with lesser amounts of Type II. Vitrinite is the dominant maceral group observed in the
analyzed Bhuban samples followed by liptinite and inertinite. Vitrinite reflectance, Tmax and biomarker parameters
indicate the thermal maturity ranges from just pre-oil window to mid-oil window. Based on its total organic carbon
(TOC), extractable organic matter (EOM) and hydrogen index (HI), the analyzed Bhuban shales are ranked as mainly poor
to fair source rocks but with good gas generation potential. The dominant terrestrial environment prevailed during the
deposition of the studied Bhuban shales while the condition was sub-oxic as indicated by cross-plots of pristane versus
phytane and sterane versus pristane/phytane ratios.
The main objective of the present study was to provide a comprehensive LCI of medium scale composting of food waste
and yard waste at institutional level, based on substance flow analysis (SFA). A secondary objective was to present the
composition and assess the quality of the final compost product from composting of typical Asian organic waste (food
waste and yard waste). The experiments were designed to represent a batch situation in an institutional medium size
composting scenario with input material of food waste mixed with grass clippings and dried leaves. Two composting
runs were carried out with the intention to showcase the heterogeneity of organic waste and study the effect of windrow
size on the performance of the process. The input and output material were sampled and characterized in order to
quantify the substance balance of the process. SFA was performed by means of the mass balance model STAN 2.5 to
compute unknown parameters (gaseous emissions). SFAs have been performed for C, N, K, P, Cd, Cr, Cu, Ni and Pb. The
composting windrows were fed with 212.4 and 393 kg, respectively. VS content reduction is greater in composting pile
with larger size (Run 2). The loss of C during composting was recorded in the range of 0.146-0.166 kg/kg ww. The C
losses via leachate were insignificant (0.02% of the total input C). The total N loss during the process was 0.005-0.012
kg/kg ww. The leachate generation was measured as 0.012-0.013 kg/kg ww. The flows of selected heavy metals were
assessed. Heavy metals were of minor significance due to low concentrations in the inputs (food waste and yard waste).
Heavy metals were found to be released to the atmosphere. However, majority of heavy metals remain in the finished
compost. The C/N reduction during the process was in the range of 10-23%. In general, the compost composition was
considered to be within the ranges previously reported in literature and thus ready for application in gardening. The LCI
presented in the present study can be used as a starting point for making environmental assessments of medium-scale
co-composting of food waste and yard waste in tropical environment. No major environmental problems were identified
from the process, except for the emissions of GHGs.
Acetobacter xylinum strains are known as efficient producers of cellulose. A. xylinum is an obligate aerobic bacterium that has an oxygen-based metabolism. The dissolved oxygen (DO) concentration in a rotary discs reactor (RDR) is one of the most important factors that need to be observed during the cellulose synthesis by these bacteria. In this study, the effects of different discs rotation speed (5, 7, 9 and 12 rpm) and fermentation period (3, 4, 5 and 6 days) on the DO concentration and production of bacterial cellulose in a 10-L RDR were examined. The highest yield was obtained at 7 rpm with a total dried weight of 28.3 g for 4 days fermentation. The results showed that the DO concentration in the 10-L RDR increased in the range of 13 to 17% with increasing of discs rotation speed from 7 to 12 rpm. However, fermentation with high discs rotation speed at 12 rpm reduced the bacterial cellulose production. Analysis of data using Statistica 8.0 showed a high coefficient of determination value (R2 = 0.92). In conclusion, discs rotation speed gave more significant effect on the DO concentration and production of bacterial cellulose in 10-L RDR compared to fermentation period. This was further combined with synergistic effect from sufficient consumption of oxygen for the enhanced production of bacterial cellulose and providing the controlled environment for encouraging bacterial growth throughout the fermentation process.
Austenitic stainless steels of grade 304 were exposed to dry (Ar-75%CO2) and wet (Ar-75%CO2-12%H2O) environments at 700oC. This experimental setup involved horizontal tube furnace connected to CO2 gas and water vapour facilities. X-ray diffraction (XRD) technique, variable pressure-scanning electron microscope (VP-SEM) and optical microscope techniques were used to characterize the products of corrosion. The results of XRD showed that the phase of oxide layers consists of Cr2O3 and NiCr2O4 in dry CO2, meanwhile Fe2O3, Cr2O3, Fe0.56Ni0.34, Fe3O4 were identified in wet condition after 50 h. Adding 12%H2O in Ar-75%CO2 leads significantly in weight change occurred at 10 h exposure. However, after 20 h, the weight gain was decreased due to spallation of the oxide scale. The addition of water vapour accelerates the oxidation rate on the steel than that in dry condition. Morphologies and growth kinetics of these oxides vary with reaction condition. The oxidation behaviour at different times of exposure and the effect of water vapour were discussed in correlation with the microstructure of the oxides.
Miocene larger benthic foraminifera have been discovered from a limestone unit of the Kalumpang Formation. The limestone is exposed at the Teck Guan Quarry, Tawau, southeast Sabah. The Kalumpang Formation consists predominantly of interbedded mudstone and sandstone (graywacke), conglomerate, limestone, marl, chert and volcanic rocks. Five limestone samples have been collected and processed for petrographic analysis and identification of larger benthic foraminifera. The limestone is classified as packstone and mudstone. A total of seventeen species of larger benthic foraminifera have been identified. The foraminifera are divided into two assemblages namely Assemblage I and Assemblage II. Assemblage I is characterized by the presence of Lepidocyclina (Nephrolepidina) parva, Operculina sp. and Lepidocyclina (Eulepidina) formosa. This assemblage is an indicative of Aquitanian to Burdigalian in age (Early Miocene). Assembalge II comprises of Lepidocyclina (Nephrolepidina) sumatrensis, Lepidocyclina (Nephrolepidina) angulosa, Lepidocyclina (Nephrolepidina) ferreroi Lepidocyclina sp., Miogypsina sp., Katacycloclypeus annulatus, Katacyloclypeus martini, Cycloclypeus carpenteri, Cycloclypeus indopacificus, Cycloclypeus sp., Flosculinella bontangensis, Operculina complanata, Amphistegina bowdenensis and Amphistegina sp. This assemblage is an indicative of Langhian to Serravallian age (Middle Miocene). The foraminiferal assemblages suggest that the depositional environment was a warm tropical shallow-marine at the fore-reef shelf zone.
In most research including environmental research, missing recorded data often exists and has become a common problem for data quality. In this study, several imputation methods that have been designed based on the techniques for functional data analysis are introduced and the capability of the methods for estimating missing values is investigated. Single imputation methods and iterative imputation methods are conducted by means of curve estimation using regression and roughness penalty smoothing approaches. The performance of the methods is compared using a reference data set, the real PM10 data from an air quality monitoring station namely the Petaling Jaya station located at the western part of Peninsular Malaysia. A hundred of the missing data sets that have been generated from a reference data set with six different patterns of missing values are used to investigate the performance of the considered methods. The patterns are simulated according to three percentages (5, 10 and 15) of missing values with respect to two different sizes (3 and 7) of maximum gap lengths (consecutive missing points). By means of the mean absolute error, the index of agreement and the coefficient of determination as the performance indicators, the results have showed that the iterative imputation method using the roughness penalty approach is more flexible and superior to other methods.
Dengue fever is a vector-borne viral disease which is now endemic in more than 100 countries affecting more than 2.5 billion people worldwide. In recent years, dengue fever has become a major threat to public health in Pakistan. In this paper, we derived an explicit formula for reproduction number R0 (the most important epidemiological parameter) and then used real data of dengue fever cases of different hospitals of Lahore (Pakistan) on R0. Conditions for local stability of equilibrium points are discussed. In the end, simulations are carried out for different situations.
Science has been defined as 'a way of knowing' which is, in certain respects, unlike other ways of knowing. While some forms of knowledge are highly personal and intuitive, the methods of science are designed to be as objective and impersonal as possible. Science has been referred to as 'public knowledge' because of its procedures for verification involve the whole of society. Science is also 'organised knowledge' because it is systematic and because it is supported by a group of social institutions without which it could not exist in its modern form. For many decades, Fensham, an internationally recognised science educator, has been one of the most important and consistent voices for the reform of science education based on his vision of a democratic and socially responsible science education for all, based on the fundamental premise that if society is to understand the world it must be educated in the principles of science upon which a sustainable world is premised. Thus, science has a real place in society and a social responsibility. From a chemistry perspective, this enabling science is perceived by society as irrelevant to the real world and the cause of many of the evils of the world. This paper addresses the pivotal role of chemistry both in science education and in the social responsibility of science campaign and simultaneously shows how chemistry is at the leading edge of sustainable science in both a scientific and social context.
Sains telah ditakrifkan sebagai 'suatu cara mengetahui'. Dalam ertikata tertentu, takrif ini berlainan dengan cara-cara mengetahui hal-hal lain. Sesetengah bentuk pengetahuan sangatlah tersendiri dan intuitif, namun kaedah sains direkabentuk sedemikian sehingga sejauh mungkin ia berobjektif dan tidak tersendiri. Sains telah dirujukkan sebagai 'pengetahuan awam' kerana prosedur pensahihannya melibatkan seluruh masyarakat. Sains juga merupakan 'pengetahuan yang tersusun' kerana ini bersistem dan kerana ia disokong oleh kumpulan institusi sosial. Tanpa sokongan ini sains tidak boleh wujud dalam bentuk modemnya. Selama beberapa dekad yang lalu, Fensham, seorang ahli pendidikan sains yang diiktiraf antarabangsa, merupakan seorang penggiat yang penting dan konsisten dalam menyuarakan pendapat ke arah perubahan pendidikan sains berdasarkan visinya, iaitu pendidikan sains untuk semua secara demokratik dan bertanggungjawab kepada masyarakat, berlandaskan kepada premis asas bahawa jika masyarakat hendak memahami dunia, maka ia mestilah dididik dalam prinsip-prinsip sains dengan prinsip-prinsip itu sendiri dijadikan premos bagi sebuah dunia mampan. Dengan demikian, sains mempunyai tempatnya yang sebenar dalam masyarakat dan mempunyai tanggungjawab kemasyarakatan. Dari perspektif kimia, masyarakat bertanggapan bahawa sains tersebut tidaklah relevan dalam dunia nyata dan merupakan penyebab kepada banyak keburukan dalam dunia ini. Kertas ini mengupas peranan pengimbangan bidang kimia dalam pendidikan sains dan dalam tanggungjawab sosial kempen sains dan sekali gus menunjukkan bahawa kimia adalah teraju bagi sains mampan dalam kedua-dua konteks sainstifik dan sosial.
The development of economy is closely related with the inflation rate of the country. Generally the inflation can be measured by the Consumer Price Index (CPl). The aim of this paper is using overlapping measure and cumulative measure to measure the inflation. In overall, these two methods are adequate for measuring the inflation. As a result, monthly measure is useful because it believe can give a perfect measure (since its sample is large) and can get rid of or smaller the error. Besides that, the value of the weighted CPl and the unweighted CPl are almost same. As the result, the unweighted of CPl is used to measure the inflation. The result of this two methods are satisfactory.
[Perkembangan sesuatu ekonomi adalah berkait rapat dengan kadar inflasi dalam sesebuah negara. Secara amnya, inflasi dapat diukur dengan Indeks Harga Pengguna (IHP). Tujuan kertas kerja ini adalah mengukur inflasi dengan menggunakan kaedah data bertindih dan kaedah kumulatif. Pada keseluruhannya kedua-dua kaedah tersebut adalah sesuai digunakan sebagai pengukuran inflasi. Oleh hal yang demikian, pengukuran secara bulanan digunakan kerana dipercayai bahawa ia dapat memberi ukuran yang lebih tepat (saiz sampel yang besar) dan dapat mengelakkan atau mengecilkan ralat berlaku. Selain itu, penggunaan IHP berpemberat dan IHP tanpa pemberat didapati mempunyai nilai yang hampir sama. Oleh itu, nilai IHP tanpa pemberat digunakan dalam pengukuran inflasi. Keputusan yang didapati daripada kedua-dua kaedah tersebut adalah memuaskan]
The effect of season on yield and quality of organic solvent extracts from Gracilaria changii was determined. The sustainability of the bioactive compound of G. changii from Malaysia was investigated by using the TLC and FTIR standards methods. Studies was carried out to examine the sustainability of the bioactive compound in the various extract obtained from G. changii collected from Pantai Morib, Beach Selangor Malaysia on bimonthly for a period of one year in 2003. This study revealed that the bioactive compounds was present all over the year but with different quantities. In general the variation in yield or quantities of bioactive compound was related to environment. G. changii can be considered a candidate for drug development since it retained the number of bioactive compound.
Cement industries globally produced about 2.282 billion ton/year and 25 billion tons of concrete are produced yearly
all over the world, necessary measures are to be taken to reduce energy use along with the prevention of environmental
degradation, depletion of the limited resources and contribute 7% to global warming effects due to the release of carbon
dioxide to the atmosphere. Cement additives quality improver polymer (CAQIP) was developed from synthesized polymer,
waste materials derived from petro-chemical and palm oil waste for production of sustainable cement. Industrial scale
trial in a local cement plants by dosing 0.009%-0.690% CAQIP significant improved productivity, 8.3-27.5% efficiency in
saving, 24.73-86.36% clinkering energy and 7.7-21.57% grinding energy in the production of Ordinary Portland Cement
and sustainable cement. Strength quality improved 7.31-34.8% (2 day) and 3.85-57.58% (28 day). Carbon dioxide and
others toxic gases emission was reduced 21.90-90.0% by replacing clinker with waste material such as fly ash (25-
35%), out-spec clinker (50-100%) and limestone waste (5-25%). The developed CAQIP significant improved productivity,
quality strength, reduced CO2
emission, grinding & clinkering energy and enhanced production of sustainable cement
and concrete in Malaysia.
Countering the dangers associated the present extreme climate not only requires continuous improvement of local disaster
prevention engineering infrastructure but also needs an enhanced understanding of the causes of the disasters. This study
investigates the geologic hazard risk of 53 slopeland villages in Pingtung county of southern Taiwan. First, remote sensing
(RS) techniques were utilized to interpret environmental geology and geologic hazard zonation, including dip slope, fault,
landslide and debris flow. GIS map overlay analysis was used to further identify the extent of the geologic hazard zonation.
As a final step, field investigation is used to comprehend geologic, topographic conditions and the geologic hazard risk
specific to each locality. Based on data analysis and field investigation results, this study successfully integrates RS, GIS
and GPS techniques to construct a geologic hazard risk assessment method of slopeland village. The results of this study
can be used to promote support for future disaster prevention and disaster mitigation efforts.
A detailed sedimentological study and facies analysis of the Permian age, uppermost succession of the Kubang Pasu Formation in Perlis was conducted in order to reconstruct the palaeo-depositional environment. Four stratigraphic sections of the uppermost Kubang Pasu Formation were logged at Bukit Chondong and Bukit Tungku Lembu, Perlis. The sections were divided into facies based on lithology and sedimentary structures. Large scale patterns in the form of facies associations and facies successions were also identified. The uppermost Kubang Pasu Formation can be divided into several coarsening upward facies successions. Each facies succession grades upward from an offshore facies association (FA1) composed of bioturbated mudstone and minor thin sandstone, into a distal lower shoreface facies association (FA 2) composed primarily of mudstone interbedded with hummocky cross-stratified sandstone (HCS) and finally a proximal lower shoreface facies association (FA 3) composed of amalgamated hummocky cross-stratified sandstone beds. The facies succession is interpreted as representing a wave- and storm-influenced coastal depositional environment. The gradual transition from siliciclastics to carbonates is probably related to post rift thermal subsidence and tectonic quiescence due to separation of Sibumasu from Gondwana during the Permian.
The Sandakan Formation of the Segama Group is exposed across the Sandakan Peninsular in eastern Sabah. This Upper Miocene part of the Segama Group unconformably overlies the Garinono Formation and is conformably overlain by the Bongaya Formation. This formation was investigated with detailed logging of outcrops and microfossils analysis in order to map the depositional facies and sedimentary environment. This study showed the presence of seven lithofacies: Thick amalgamated sandstone; thin, lenticular interbedded HCS sandstones and mudstone; laminated mudstone with Rhizophora; trough cross-bedded sandstone; laminated mudstone; strip mudstone with thin sandstone and siltstone; and interbedded HCS sandstone and mudstone. Based on the presence of Rhizophora, Brownlowia, Florchuetia sp., Polypodium, Stenochleana palustris, Ascidian spicule low angle cross bedding, very fine grained sandstone, thin alternations of very fine sandstone, silt and clay layers showing cyclicity (muddy rhythemites), rocks in the Sandakan Formation are interpreted as mangal estuary and open marine facies. Three facies associations could be deduced from the seven lithofacies: Gradual coarsening upwards shoreface; abrupt change facies and prograding estuary facies association.
The abundance of marine benthic organisms often exhibits distinct distributional patterns, which is generally governed by many physical and biological factors specific to the habitat. In this study, the spatial and temporal variations in abundance of the dog conch, Strombus canarium Linnaeus 1758, a commercially important marine gastropod, was investigated. Assessment of conch abundance at Merambong seagrass bed, Malaysia, was conducted using a transect belt method. Sampling stations were randomly selected and environmental parameters associated with the habitat were recorded. The species showed distinct spatial distributional pattern. Conch densities were significantly higher in sheltered areas, mainly in mixed seagrass bed dominated by Halophila spp. and with high sediment organic content. The densities were relatively very low in areas dominated by the tape seagrass, Enhalus acoroides. The species studied also showed distinct temporal variation in abundance. The abundance value was seasonally varied with highest density recorded during the wet monsoon season (p<0.05). The densities were otherwise very low during the dry season, except for a slight peak in July. Since the conch is a very important fishery species within the Johor Straits and regulations on their harvesting is still lacking, this information would be very important for their sustainable management.
The seasonal variation of spider assemblages in botanical garden was investigated. The spiders were manually collected by diurnal and nocturnal session between two seasons. A total of 19 families from 65 genera and 96 species were recorded. Richness-estimator indicates the inventory were 67% complete within the botanical garden. The capture rate for web-weavers were higher compared with non-web weavers. The comparison value showed the species composition and abundance were similar between seasons. Spider abundance was not affected between wet and dry season in tropical countries.