Displaying publications 101 - 120 of 241 in total

Abstract:
Sort:
  1. Effect of temperature and salt concentration on rheological behavior of whey protein isolate-starch mixed dispersions
    Ravindra P, Chan ES, Reddy KU
    Int J Food Sci Nutr, 2007 Nov;58(7):542-7.
    PMID: 17852467
    Extensive studies have been carried out on the effect of temperature and salt concentration on the theological behavior of whey proteins and different starches individually, but not on mixed dispersions of whey protein isolates and starches. In the present studies, the rheological behavior of cross-linked waxy maize starch and whey protein isolate mixed dispersions during heating at 60-85 degrees C was investigated. Further, the effect of CaCl2 (25-100 mM ionic strengths) on the gelatinization of these dispersions was determined. It was found that at a 2:3 ratio and a 3:2 ratio of cross-linked waxy maize starch to whey protein isolate mixed gels form a compatible networkmM concentration the solution viscosity was higher.
    Matched MeSH terms: Viscosity
  2. Fulltext Optimization and physical properties of gelatin extracted from pangasius catfish (Pangasius sutchi) bone
    Mahmoodani F, Ardekani VS, See SF, Yusop SM, Babji AS
    J Food Sci Technol, 2014 Nov;51(11):3104-13.
    PMID: 26396302 DOI: 10.1007/s13197-012-0816-7
    In the present study, to establish the optimum gelatin extraction conditions from pangasius catfish (Pangasius sutchi) bone, Response Surface Methodology (RSM) with a 4-factor, 5-level Central Composite Design (CCD) was conducted. The model equation was proposed with regard to the effects of HCl concentration (%, X1), treatment time (h, X2), extraction temperature (°C, X3) and extraction time (h, X4) as independent variables on the hydroxyproline recovery (%, Y) as dependent variable. X 1 = 2.74 %, X 2 = 21.15 h, X 3 = 74.73 °C and X 4 = 5.26 h were found to be the optimum conditions to obtain the highest hydroxyproline recovery (68.75 %). The properties of optimized catfish bone gelatin were characterized by amino acid analysis, SDS-PAGE, gel strength, TPA and viscosity in comparison to bovine skin gelatin. The result of SDS-PAGE revealed that pangasius catfish bone gelatin consisted of at least 2 different polypeptides (α1 and α2 chains) and their cross-linked chains. Moreover, the pangasius catfish bone gelatin was found to contain 17.37 (g/100 g) imino acids (proline and hydroxyproline). Pangasius catfish bone gelatin also indicated physical properties comparable with that of bovine and higher than those from cold water fish gelatin. Based on the results of the present study, there is a potential for exploitation of pangasius catfish bone for gelatin production. Furthermore, RSM provided the best method for optimizing the gelatin extraction parameters.
    Matched MeSH terms: Viscosity
  3. Fulltext Heat Transfer in MHD Mixed Convection Flow of a Ferrofluid along a Vertical Channel
    Gul A, Khan I, Shafie S, Khalid A, Khan A
    PLoS One, 2015;10(11):e0141213.
    PMID: 26550837 DOI: 10.1371/journal.pone.0141213
    This study investigated heat transfer in magnetohydrodynamic (MHD) mixed convection flow of ferrofluid along a vertical channel. The channel with non-uniform wall temperatures was taken in a vertical direction with transverse magnetic field. Water with nanoparticles of magnetite (Fe3O4) was selected as a conventional base fluid. In addition, non-magnetic (Al2O3) aluminium oxide nanoparticles were also used. Comparison between magnetic and magnetite nanoparticles were also conducted. Fluid motion was originated due to buoyancy force together with applied pressure gradient. The problem was modelled in terms of partial differential equations with physical boundary conditions. Analytical solutions were obtained for velocity and temperature. Graphical results were plotted and discussed. It was found that temperature and velocity of ferrofluids depend strongly on viscosity and thermal conductivity together with magnetic field. The results of the present study when compared concurred with published work.
    Matched MeSH terms: Viscosity
  4. Classification, processing and application of hydrogels: A review
    Ullah F, Othman MB, Javed F, Ahmad Z, Md Akil H
    Mater Sci Eng C Mater Biol Appl, 2015 Dec 1;57:414-33.
    PMID: 26354282 DOI: 10.1016/j.msec.2015.07.053
    This article aims to review the literature concerning the choice of selectivity for hydrogels based on classification, application and processing. Super porous hydrogels (SPHs) and superabsorbent polymers (SAPs) represent an innovative category of recent generation highlighted as an ideal mould system for the study of solution-dependent phenomena. Hydrogels, also termed as smart and/or hungry networks, are currently subject of considerable scientific research due to their potential in hi-tech applications in the biomedical, pharmaceutical, biotechnology, bioseparation, biosensor, agriculture, oil recovery and cosmetics fields. Smart hydrogels display a significant physiochemical change in response to small changes in the surroundings. However, such changes are reversible; therefore, the hydrogels are capable of returning to its initial state after a reaction as soon as the trigger is removed.
    Matched MeSH terms: Viscosity
  5. Molecular structure, chemical properties and biological activities of Pinto bean pod polysaccharide
    Kamarudin F, Gan CY
    Int J Biol Macromol, 2016 Jul;88:280-7.
    PMID: 27044345 DOI: 10.1016/j.ijbiomac.2016.04.003
    Pinto bean pod polysaccharide (PBPP) was successfully extracted with yield of 38.5g/100g and the PBPP gave total carbohydrate and uronic acid contents of 286.2mg maltose equivalent/g and 374.3mgGal/g, respectively. The Mw of PBPP was 270.6kDa with intrinsic viscosity of 0.262dm(3)/g, which composed of mannose (2.5%), galacturonic acid (15.0%), rhamnose (4.0%), glucose (9.0%), galactose (62.2%), xylose (2.9%) and arabinose (4.3%) with trace amount of ribose and fucose. The result suggested that PBPP has a spherical conformation with a highly branched structure. Fourier Transform Infrared analysis showed that PBPP has a similar structure as commercial pectin with an esterification degree of 59.9%, whereas scanning electron microscopy study showed that the crude polysaccharide formed a thin layer of film that was made of multiple micro strands of fibre. PBPP exhibited substantial free radical scavenging activity (7.7%), metal reducing capability (2.04mmol/dm(3)) and α-amylase inhibitory activity (97.6%) at a total amount of 1mg. PBPP also exhibited high water- and oil-holding capacities (3.6g/g and 2.8g/g, respectively). At a low concentration, PBPP exhibited emulsifying activity of 39.6% with stability of 38.6%. Apart from that, PBPP was able to show thickening capability at low concentration (0.005kg/dm(3)).
    Matched MeSH terms: Viscosity
  6. Fulltext Formulation and evaluation of voriconazole ophthalmic solid lipid nanoparticles in situ gel
    Pandurangan DK, Bodagala P, Palanirajan VK, Govindaraj S
    Int J Pharm Investig, 2016 Jan-Mar;6(1):56-62.
    PMID: 27014620 DOI: 10.4103/2230-973X.176488
    In the present investigation, solid lipid nanoparticles (SLNs)-loaded in situ gel with voriconazole drug was formulated. Further, the formulation was characterized for pH, gelling capacity, entrapment efficiency, in vitro drug release, drug content, and viscosity. Voriconazole is an antifungal drug used to treat various infections caused by yeast or other types of fungi. Film hydration technique was used to prepared SLNs from lecithin and cholesterol. Based on the entrapment efficiency 67.2-97.3% and drug release, the optimized formulation NF1 of SLNs was incorporated into in situ gels. The in situ gels were prepared using viscosity-enhancing polymers such as Carbopol and (hydroxypropyl)methyl cellulose (HPMC). Formulated SLN in situ gel formulations were characterized, which showed pH 4.9-7.1, drug content 65.69-96.3%, and viscosity (100 rpm) 120-620 cps. From the characterizations given above, F6 was optimized and evaluated for microbial assay and ocular irritation studies. Microbial assay was conducted by the cup-plate method using Candida albicans as the test organism. An ocular irritation study was conducted on albino rabbits. The results revealed that there was no ocular damage to the cornea, conjunctiva, or iris. Stability studies were carried out on the F6 formulation for 3 months, which showed that the formulation had good stability. These results indicate that the studied SLNs-loaded in situ gel is a promising vehicle for ocular delivery.
    Matched MeSH terms: Viscosity
  7. Fulltext Effect of Extra-Framework Cations of LTL Nanozeolites to Inhibit Oil Oxidation
    Tan KH, Cham HY, Awala H, Ling TC, Mukti RR, Wong KL, et al.
    Nanoscale Res Lett, 2015 Dec;10(1):956.
    PMID: 26058517 DOI: 10.1186/s11671-015-0956-6
    Lubricant oils take significant part in current health and environmental considerations since they are an integral and indispensable component of modern technology. Antioxidants are probably the most important additives used in oils because oxidative deterioration plays a major role in oil degradation. Zeolite nanoparticles (NPs) have been proven as another option as green antioxidants in oil formulation. The anti-oxidative behavior of zeolite NPs is obvious; however, the phenomenon is still under investigation. Herein, a study of the effect of extra-framework cations stabilized on Linde Type L (LTL) zeolite NPs (ca. 20 nm) on inhibition of oxidation in palm oil-based lubricant oil is reported. Hydrophilic LTL zeolites with a Si/Al ratio of 3.2 containing four different inorganic cations (Li(+), Na(+), K(+), Ca(2+)) were applied. The oxidation of the lubricant oil was followed by visual observation, colorimetry, fourier transform infrared (FTIR) spectroscopy, (1)H NMR spectroscopy, total acid number (TAN), and rheology analyses. The effect of extra-framework cations to slow down the rate of oil oxidation and to control the viscosity of oil is demonstrated. The degradation rate of the lubricant oil samples is decreased considerably as the polarizability of cation is increased with the presence of zeolite NPs. More importantly, the microporous zeolite NPs have a great influence in halting the steps that lead to the polymerization of the oils and thus increasing the lifetime of oils.
    Matched MeSH terms: Viscosity
  8. Fulltext Antioxidant effect of supercritical CO2 extracted Nigella sativa L. seed extract on deep fried oil quality parameters
    Solati Z, Baharin BS
    J Food Sci Technol, 2015 Jun;52(6):3475-84.
    PMID: 26028729 DOI: 10.1007/s13197-014-1409-4
    Effect of supercritical CO2 extracted Nigella sativa L. seed extract (NE) on frying performance of sunflower oil and refined, bleached and deodorized (RBD) palm olein was investigated at concentrations of 1.2 % and 1.0 % respectively. Two frying systems containing 0 % N. sativa L. extract (Control) and 0.02 % butylated hydroxytoluene (BHT) were used for comparison. Physicochemical properties such as fatty acid composition (FAC), Peroxide Value (PV), Anisidine Value (AV), Totox Value (TV), Total Polar Content (TPC), C18:2/C16:0 ratio and viscosity of frying oils were determined during five consecutive days of frying. Results have shown that N. sativa L. extract was able to improve the oxidative stability of both frying oils during the frying process compared to control. The stabilizing effect of antioxidants were in the order of BHT > NE. RBD palm olein was found to be more stable than sunflower oil based on the ratio of linoleic acid (C18:2) to palmitic acid (C16:0) and fatty acid composition.
    Matched MeSH terms: Viscosity
  9. Relationships of damaged starch granules and particle size distribution with pasting and thermal profiles of milled MR263 rice flour
    Asmeda R, Noorlaila A, Norziah MH
    Food Chem, 2016 Jan 15;191:45-51.
    PMID: 26258700 DOI: 10.1016/j.foodchem.2015.05.095
    This research was conducted to investigate the effects of different grinding techniques (dry, semi-wet and wet) of milled rice grains on the damaged starch and particle size distribution of flour produced from a new variety, MR263, specifically related to the pasting and thermal profiles. The results indicated that grinding techniques significantly (p<0.05) affected starch damage content and particle size distribution of rice flour. Wet grinding process yields flour with lowest percentage of starch damage (7.37%) and finest average particle size (8.52μm). Pasting and gelatinization temperature was found in the range of 84.45-89.63°C and 59.86-75.31°C, respectively. Dry ground flour attained the lowest pasting and gelatinization temperature as shown by the thermal and pasting profiles. Correlation analysis revealed that percentage of damaged starch granules had a significant, negative relationship with pasting temperature while average particle size distribution had a significant, strong negative relationship with gelatinization temperature.
    Matched MeSH terms: Viscosity
  10. Fulltext Characterization of flaxseed oil emulsions
    Lee PE, Choo WS
    J Food Sci Technol, 2015 Jul;52(7):4378-86.
    PMID: 26139903 DOI: 10.1007/s13197-014-1495-3
    The emulsifying capacity of surfactants (polysorbate 20, polysorbate 80 and soy lecithin) and proteins (soy protein isolate and whey protein isolate) in flaxseed oil was measured based on 1 % (w/w) of emulsifier. Surfactants showed significantly higher emulsifying capacity compared to the proteins (soy protein isolate and whey protein isolate) in flaxseed oil. The emulsion stability of the flaxseed oil emulsions with whey protein isolate (10 % w/w) prepared using a mixer was ranked in the following order: 1,000 rpm (58 min) ≈ 1,000 rpm (29 min) ≈ 2,000 rpm (35 min) >2,000 rpm (17.5 min). The emulsion stability of the flaxseed oil emulsions with whey protein isolate (10 % w/w) prepared using a homogenizer (Ultra Turrax) was independent of the speed and mixing time. The mean particle size of the flaxseed oil emulsions prepared using the two mixing devices ranged from 23.99 ± 1.34 μm to 47.22 ± 1.99 μm where else the particle size distribution and microstructure of the flaxseed oil emulsions demonstrated using microscopic imaging were quite similar. The flaxseed oil emulsions had a similar apparent viscosity and exhibited shear thinning (pseudoplastic) behavior. The flaxseed oil emulsions had L* value above 70 and was in the red-yellow color region (positive a* and b* values).
    Matched MeSH terms: Viscosity
  11. Fulltext Chitosan extracted from mud crab (Scylla olivicea) shells: physicochemical and antioxidant properties
    Sarbon NM, Sandanamsamy S, Kamaruzaman SF, Ahmad F
    J Food Sci Technol, 2015 Jul;52(7):4266-75.
    PMID: 26139891 DOI: 10.1007/s13197-014-1522-4
    The aim of this study is to report the yield of extraction, as well as the physicochemical and antioxidant properties of extracted chitosan from mud crabs (S.olivacea) as compared to commercial chitosan. The yield obtained for extracted chitosan was 44.57 ± 3.44 % with a moisture and ash content of 9.48 ± 0.59 % and 5.97 ± 0.90 %, respectively. Commercial chitosan demonstrated a higher degree of deacetylation (58.42 ± 2.67 %), water (250 ± 9.90 %) and fat (329 ± 7.07 %) binding capacity, solubility (73.85 %), viscosity (463.25 ± 13.10 %) and also the whiteness value (77.8 ± 0.47) compared to the extracted chitosan, which were only 53.42 ± 0.88 %, 180 ± 0.00 %, 260 ± 0.00 %, 53.38 %, 383.9 ± 28.43 % and 62.1 ± 7.52 %, respectively. The structure of extracted and commercial chitosan was also investigated using Fourier Transform Infrared Spectroscopy (FTIR). In conclusion, the extracted chitosan possessed potential properties similar to the commercial chitosan with high reducing power but low in the scavenging activity on the DPPH and hydroxyl radicals compared to the commercial chitosan.
    Matched MeSH terms: Viscosity
  12. Observations of acoustic streaming fields around an oscillating ultrasonic file
    Ahmad M, Roy RA, Kamarudin AG
    Endod Dent Traumatol, 1992 Oct;8(5):189-94.
    PMID: 1302678
    The steady acoustic streaming generated around straight and precurved oscillating ultrasonic files driven by the Piezon-Master 400 unit was examined in the free field and in small channels using a stereomicroscope. In addition, the effect of file-wall contact on streaming production was also investigated. The results indicated that the ultrasonic files can generate acoustic streaming both in the free field and in the small channel. Higher velocity streaming was observed when smaller size files were employed and when the file was precurved. Light file-wall contact did not totally inhibit streaming while severe file-wall contact inhibited movement of the file and, as a result, no streaming was observed. The positions and length scales of the streaming vortices appeared to be influenced by the presence of boundaries. In the free field, two rows of vortices were situated along the sides of the file while in the small channel, the vortices were positioned above the surface of the file. These results indicated that it is possible for acoustic streaming to occur in a confined space as in a root canal provided that severe file-wall contact is avoided. It is therefore recommended that light filing or allowing the file to freely vibrate during some stage of treatment should be carried out in order to generate streaming in the root canal.
    Matched MeSH terms: Viscosity
  13. Fulltext Influence of Multiwalled Carbon Nanotubes on the Rheological Behavior and Physical Properties of Kenaf Fiber-Reinforced Polypropylene Composites
    Abdul Azam F', Razak Z, Md Radzi MKF, Muhamad N, Che Haron CH, Sulong AB
    Polymers (Basel), 2020 Sep 13;12(9).
    PMID: 32933225 DOI: 10.3390/polym12092083
    The incorporation of kenaf fiber fillers into a polymer matrix has been pronounced in the past few decades. In this study, the effect of multiwalled carbon nanotubes (MWCNTs) with a short kenaf fiber (20 mesh) with polypropylene (PP) added was investigated. The melt blending process was performed using an internal mixer to produce polymer composites with different filler contents, while the suitability of this melt composite for the injection molding process was evaluated. Thermogravimetric analysis (TGA) was carried out to investigate the thermal stability of the raw materials. Rheological analyses were conducted by varying the temperature, load factor, and filler content. The results demonstrate a non-Newtonian pseudoplastic behavior in all samples with changed kenaf fillers (10 to 40 wt %) and MWCNT contents (1 to 4 wt %), which confirm the suitability of the feedstock for the injection molding process. The addition of MWCNTs had an immense effect on the viscosity and an enormous reduction in the feedstock flow behavior. The main contribution of this work is the comprehensive observation of the rheological characteristics of newly produced short PP/kenaf composites that were altered after MWCNT additions. This study also presented an adverse effect on the composites containing MWCNTs, indicating a hydrophilic property with improved water absorption stability and the low flammability effect of PP/kenaf/MWCNT composites. This PP/kenaf/MWCNT green composite produced through the injection molding technique has great potential to be used as car components in the automotive industry.
    Matched MeSH terms: Viscosity
  14. Fulltext Treatment Of Waste Engine Oil Using Optimized Acid/Clay Refining Method
    Fathin Nadhirah Binti Kamal Ariffin, Yusilawati Ahmad Nor, Sarina Sulaiman, Nur Ayuni Jamal
    Biological and Natural Resources Engineering Journal, 2019;2(2):37-48.
    MyJurnal
    This paper addresses the treatment of waste engine oils (WEO) by acid/clay refining method using glacial acetic acid. An optimization of the process parameters in terms of settling time, stirring speed and mixing temperature for treating the WEO was performed using Response Surface Methodology to improve the quality of treated lubricating oil. The quality of the treated WEO (Castrol brand) was evaluated in terms of viscosity index and flash point value. The treated fuel quality is found to have about 95% similarity to the fresh oil used as a standard at the settling time of 24 hours, temperature of 50 °C and mixing speed of 150 rpm. Analysis of variances (ANOVA) showed that settling time plays the most significant parameters of the process followed by the mixing temperature. Solid contaminants which were collected after the treatment were analyzed using SEM-EDS. They contained rough heteregenous shaped particles with elements such as carbon (97%), calcium (1.12%), zinc (0.74%), sulphur (0.73%) and phosphorus (0.29%). Then, four different brands of WEO (Liqui Moly, Castrol, Shell and Pennzoil) were treated at the optimized conditions to determine the feasibility of the method to treat any brands of WEO. It can be concluded that the optimized treatement method is suitable to treat most of WEO. The findings of this study provide the information on the best process condition for treating WEO as well as the solid contaminants present in it.
    Matched MeSH terms: Viscosity
  15. Fulltext In situ ophthalmic gel forming systems of poloxamer 407 and hydroxypropyl methyl cellulose mixtures for sustained ocular delivery of chloramphenicole: optimization study by factorial design
    Kurniawansyah IS, Rusdiana T, Sopyan I, Ramoko H, Wahab HA, Subarnas A
    Heliyon, 2020 Nov;6(11):e05365.
    PMID: 33251348 DOI: 10.1016/j.heliyon.2020.e05365
    Background: Conventional drug delivery systems have some major drawbacks such as low bioavailability, short residence time and rapid precorneal drainage. An in situ gel drug delivery system provides several benefits, such as prolonged pharmacological duration of action, simpler production techniques, and low cost of manufacturing. This research aims to get the optimum formula of chloramphenicol in situ gel based on the physical evaluation.

    Methods: The effects of independent variables (poloxamer 407 and hydroxypropyl methyl cellulose (HPMC) concentration) on various dependent variables (gelling capacity, pH and viscosity) were investigated by using 32 factorial design and organoleptic evaluation was done with descriptive analysis.

    Results: The optimized formula of chloramphenicol in situ gel yielded 9 variations of poloxamer 407 and HPMC bases composition in % w/v as follows, F1 (5; 0.45), F2 (7.5; 0.45), F3 (10; 0.45), F4 (5; 0.725), F5 (7.5; 0.725), F6 (10; 0.725), F7 (5; 1), F8 (7.5; 1), F9 (10; 1). The results indicated that the organoleptic, pH, and gelling capacity parameters matched all formulas (F1-F9), however, the viscosity parameter only matched F3, F6, F8, and F9. Based on factorial design, F6 had the best formula with desirability value of 0.54, but the design recommended that formula with the composition bases of poloxamer 407 and HPMC at the ratio of 8.16 % w/v and 0.77 % w/v, respectively, was the optimum formula with a desirability value of 0.69.

    Conclusion: All formulas have met the Indonesian pharmacopoeia requirements based on the physical evaluation, especially formula 6 (F6), which was supported by the result of factorial design analysis.

    Matched MeSH terms: Viscosity
  16. Fulltext A New Empirical Model for Viscosity of Sulfonated Polyacrylamide Polymers
    Akbari S, Mahmood SM, Ghaedi H, Al-Hajri S
    Polymers (Basel), 2019 Jun 14;11(6).
    PMID: 31207965 DOI: 10.3390/polym11061046
    Copolymers of acrylamide with the sodium salt of 2-acrylamido-2-methylpropane sulfonic acid-known as sulfonated polyacrylamide polymers-had been shown to produce very promising results in the enhancement of oil recovery, particularly in polymer flooding. The aim of this work is to develop an empirical model through the use of a design of experiments (DOE) approach for bulk viscosity of these copolymers as a function of polymer characteristics (i.e., sulfonation degree and molecular weight), oil reservoir conditions (i.e., temperature, formation brine salinity and hardness) and field operational variables (i.e., polymer concentration, shear rate and aging time). The data required for the non-linear regression analysis were generated from 120 planned experimental runs, which had used the Box-Behnken construct from the typical Response Surface Methodology (RSM) design. The data were collected during rheological experiments and the model that was constructed had been proven to be acceptable with the Adjusted R-Squared value of 0.9624. Apart from showing the polymer concentration as being the most important factor in the determination of polymer solution viscosity, the evaluation of the model terms as well as the Sobol sensitivity analysis had also shown a considerable interaction between the process parameters. As such, the proposed viscosity model can be suitably applied to the optimization of the polymer solution properties for the polymer flooding process and the prediction of the rheological data required for polymer flood simulators.
    Matched MeSH terms: Viscosity
  17. Fulltext Phase behavior and fluid interactions of a CO2-Light oil system at high pressures and temperatures
    Rezk MG, Foroozesh J
    Heliyon, 2019 Jul;5(7):e02057.
    PMID: 31384679 DOI: 10.1016/j.heliyon.2019.e02057
    This paper investigates the phase behavior and mutual interactions between a light crude oil and CO2 at high pressures and high temperatures (HPHT). To do so, we have measured PVT properties of the CO2-oil system at HPHT using a PVT setup. We have also tried to present a detailed methodology for measuring PVT properties of CO2-oil systems and highlight the difficulties such as oil vaporization by CO2 during the experiments. A crude oil sample, collected from a Malaysian oil field, was used here. Our experiments indicated that, CO2 solubility in the oil increased at higher pressures when measured at a fixed temperature. Our experiments also showed that increasing the test temperature would reduce CO2 solubility in the oil, while its effect is more significant at higher pressures. The swelling factor (SF) measurements showed an increasing trend with pressure up to a certain value so-called extraction pressure, at which, the SF started to be reduced even became less than one. The measurements of oil viscosity indicated that CO2 dissolution in the oil sample could reduce the mixture viscosity up to 61%. The interfacial tensions between CO2 and the crude oil at different pressures were also measured while the results were used to estimate the minimum miscibility pressure (MMP) and the first contact miscibility (FCM) pressure. The IFT measurements at various pressures displayed a reduction trend as a result of more CO2 dissolution in the oil but with two different slopes. That is, at lower pressure values, the measured IFTs were sharply reduced with pressure, while the reduction rate of the IFT became less when pressures exceeded the extraction pressure. This study helps with determining the optimum pressure and temperature conditions of CO2-oil systems to have a minimum IFT, a maximum CO2 solubility and SF, and a minimum oil viscosity that are favorable for CO2-enhanced oil recovery projects. Additionally, the methodology presented here gives guidelines on how to design PVT experiments of CO2-oil systems for petroleum and chemical engineering applications.
    Matched MeSH terms: Viscosity
  18. Rigid membranes of Malayan ovalocytes: a likely genetic barrier against malaria
    Mohandas N, Lie-Injo LE, Friedman M, Mak JW
    Blood, 1984 Jun;63(6):1385-92.
    PMID: 6722355
    A high frequency of nonhemolytic hereditary ovalocytosis in Malayan aborigines is thought to result from reduced susceptibility of affected individuals to malaria. Indeed, Kidson et al. recently showed that ovalocytes from Melanesians in Papua New Guinea are resistant to infection in culture by the malarial parasite Plasmodium falciparum. In order to determine if protection against parasitic invasion in these ovalocytes might be the result of some altered membrane material property in these unusual cells, we measured their membrane and cellular deformability characteristics using an ektacytometer . Ovalocytic red cells were found to be much less deformable in comparison to normal discoid red cells. Similar measurements on isolated membrane preparations revealed a marked reduction in ovalocytic membrane deformability. To produce equal deformation of ovalocytic and normal membranes, ovalocytes required an 8-10-fold increase in applied shear stress, indicating that their membrane was capable of deforming under sufficient stress. To test the possibility that this increased membrane rigidity might confer resistance to parasitic invasion, we performed an in vitro invasion assay using Plasmodium falciparum merozoites and Malayan ovalocytes of varying deformability from seven different donors. The level of infection of the ovalocytes ranged from 1% to 35% of that in control cells, and the extent of inhibition appeared to be closely related to the reduction in membrane deformability. Moreover, we were able to induce similar resistance to parasitic invasion in nonovalocytic normal red cells by increasing their membrane rigidity with graded exposure to a protein crosslinking agent. Our findings suggest that resistance to parasite invasion of Malayan ovalocytes is the result of a genetic mutation that causes increased membrane rigidity.
    Matched MeSH terms: Blood Viscosity
  19. Fulltext Determination of Temperature-Dependent Coefficients of Viscosity and Surface Tension of Tamarind Seeds (Tamarindus indica L.) Polymer
    Malviya R, Jha S, Fuloria NK, Subramaniyan V, Chakravarthi S, Sathasivam K, et al.
    Polymers (Basel), 2021 Feb 18;13(4).
    PMID: 33670569 DOI: 10.3390/polym13040610
    The rheological properties of tamarind seed polymer are characterized for its possible commercialization in the food and pharmaceutical industry. Seed polymer was extracted using water as a solvent and ethyl alcohol as a precipitating agent. The temperature's effect on the rheological behavior of the polymeric solution was studied. In addition to this, the temperature coefficient, viscosity, surface tension, activation energy, Gibbs free energy, Reynolds number, and entropy of fusion were calculated by using the Arrhenius, Gibbs-Helmholtz, Frenkel-Eyring, and Eotvos equations, respectively. The activation energy of the gum was found to be 20.46 ± 1.06 kJ/mol. Changes in entropy and enthalpy were found to be 23.66 ± 0.97 and -0.10 ± 0.01 kJ/mol, respectively. The calculated amount of entropy of fusion was found to be 0.88 kJ/mol. A considerable decrease in apparent viscosity and surface tension was produced when the temperature was raised. The present study concludes that the tamarind seed polymer solution is less sensitive to temperature change in comparison to Albzia lebbac gum, Ficus glumosa gum and A. marcocarpa gum. This study also concludes that the attainment of the transition state of viscous flow for tamarind seed gum is accompanied by bond breaking. The excellent physicochemical properties of tamarind seed polymers make them promising excipients for future drug formulation and make their application in the food and cosmetics industry possible.
    Matched MeSH terms: Viscosity
  20. Fulltext Recent Progress on Stability and Thermo-Physical Properties of Mono and Hybrid towards Green Nanofluids
    Zainon SNM, Azmi WH
    Micromachines (Basel), 2021 Feb 11;12(2).
    PMID: 33670250 DOI: 10.3390/mi12020176
    Many studies have shown the remarkable enhancement of thermo-physical properties with the addition of a small quantity of nanoparticles into conventional fluids. However, the long-term stability of the nanofluids, which plays a significant role in enhancing these properties, is hard to achieve, thus limiting the performance of the heat transfer fluids in practical applications. The present paper attempts to highlight various approaches used by researchers in improving and evaluating the stability of thermal fluids and thoroughly explores various factors that contribute to the enhancement of the thermo-physical properties of mono, hybrid, and green nanofluids. There are various methods to maintain the stability of nanofluids, but this paper particularly focuses on the sonication process, pH modification, and the use of surfactant. In addition, the common techniques to evaluate the stability of nanofluids are undertaken by using visual observation, TEM, FESEM, XRD, zeta potential analysis, and UV-Vis spectroscopy. Prior investigations revealed that the type of nanoparticle, particle volume concentration, size and shape of particles, temperature, and base fluids highly influence the thermo-physical properties of nanofluids. In conclusion, this paper summarized the findings and strategies to enhance the stability and factors affecting the thermal conductivity and dynamic viscosity of mono and hybrid of nanofluids towards green nanofluids.
    Matched MeSH terms: Viscosity
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links