Copper phthalocyanine (CuPc) thin films have been prepared using a simple spin coating method. The films were annealed at 5 different temperatures (323, 373, 473, 523 and 573 K) for one hour in air. Optical properties study using the UV-Vis spectrophotometer showed that in the range of wavelength of 300-800 nm, all of the films have identical absorption coefficient patterns and there was no systematic changes with respect to annealing temperature. The film annealed at 373 K showed the highest absorbance while the lowest absorbance was shown by the film annealed at 323 K. The results showed that the optical band gaps depended on the temperature. The film annealed at 373 K has the lowest optical energy gap. Using the five annealed films, solar cell with the configuration of Ag / n-Si / CuPc / Ag were fabricated. Under the 50 W/cm2 light illumination, the current voltage measurements at room temperature were carried out on the device. The device which consists of film annealed at 373 K exhibited the best photovoltaic characteristics. The different annealing temperature also affect the photovoltaic behavior of the devices in a non-systematic way.
Dengue disease, which is caused by dengue virus (DENV) has been a major worldwide concern, with increased number of cases each year. Currently, there are no specific medications to treat the disease. Hence, there is a dire need to develop novel drugs for disease treatment. Glycolysis is a metabolic pathway that serves as the main source of energy for DENV replication and targeting the pathway is one of the ideal approach to discover new anti-DENV drugs. This paper focuses on the inhibition of human hexokinase isoform 2 (HK2) enzyme, which is one of the important enzymes in glycolysis, in the quest to disrupt DENV replication. In order to search for potential inhibitors, two methods were conducted, which are ligand-based screening and structure-based screening approaches. Docking of Daidzin , which was derived from Kudzu, a Japanese plant, into the active site of HK2 has shown the nearest binding affinity score (-7.94 kcal/mol) to glucose‘s (GLC), which is -8.15 kcal/mol. Meanwhile, Ethyl (2R)-2-[[3-[2-[(4-methylbenzoyl) amino]ethyl]-[1,2,4]triazolo[4,3-b]pyridazin-6-yl]sulfanyl]butanoate (Ethyl 2(R)), a compound which is the analogue of ((22E, 24R)-6β-methoxyergosta-7, 9(11), 22-triene-3β,5α-diol) or compound 2 from Ganoderma sinense obtained from ligand-based screening was also docked into the binding site of HK2, showing a binding affinity score of -8.43 kcal/mol. Both docking was conducted by using AutoDock4 software at virtual screening phase. These compounds were further analysed in an inhibition assay to determine the effects of these potential naturally-derived inhibitors on the activity of HK2. The outcome from the inhibition studies showed that both compounds exhibited substantial inhibition on the activity of HK2 enzyme, where Daidzin, at 0.5 mM, resulted in HK2 remaining activity of 87.28%, while Ethyl (2R) resulted in 70.09% of HK2 remaining activity at 0.5 mM concentration. The results also indicate that as the concentration of these compounds increased, the percentage of remaining enzyme activity decreased. In conclusion, this study has served as a platform for the development of anti-dengue drugs based on naturally-derived compounds, which is anticipated to be a safer option for dengue treatment.
The presence of pores plays an important role for many membrane processes especially in ultrafiltration and microfiltration. Epoxidised natural rubber (ENR)/polyvinyl chloride (PVC) membranes filled with two types of silica fillers were prepared via simultaneous solvent exchange and evaporation of solvent technique. Two types of silica, i.e. microsilica (microcrystalline
silica powder) and nanosilica (generated from tetraethoxysilane (TEOS)) were used. The chemical composition, morphology and mechanical stability of the membranes were studied. Both types of silica showed good interaction with the membrane matrix. The formation of pores depended on the size of silica particles added. Microsilica produced large pores while insitu generated nanosilica produced nanosized pores. The mechanical properties of membrane improved with the addition
of silica. The tensile strength increased from 10.6 MPa to 17.8 MPa and 14.5 MPa for nanosilica and microsilica filled membrane while the tensile modulus increased from 1.6 MPa to 3.8 MPa and 3.4 MPa, respectively. Thus, both types of silica acted as a filler as well as pore forming agent for the ENR/PVC membrane.
Baking temperature and time are among the conditions for producing good quality cakes. The aim of this study was to investigate the effects of baking temperature and time on the volume expansion, moisture content, and texture of moist cakes baked in either an air fryer or a convection oven. The cakes were baked under different conditions: (1) baking temperature of 150 °C, 160 °C, and 170 °C for both air fryer and convection oven and (2) baking time of 25, 30, 35 min for air fryer and 35, 40, 45 min for convection oven. Baking temperature and time were found to have a significant (p
This study offers the numerical solutions for the problem of mixed convection stagnation-point flow along a permeable
vertical flat plate in an Oldroyd-B fluid. The present investigation considers the effects of thermal radiation and heat
generation/absorption in the fluid flow. The similarity transformation simplifies the complex model and the bvp4c function
generates the numerical solutions according to the variations in the governing parameters. A higher degree of shrinking
hastens flow separations. The dual solutions are visible in the range of buoyancy opposing flow. The results from this study
may be useful for the scientist to understand the behaviour of the dilute polymer solutions in the industrial applications,
for example, the drag reduction in pipe flows.
We study the photoelectron spectra by intense laser pulses with arbitrary time dependence and phase within the Keldysh framework. An efficient semianalytical approach using analytical transition matrix elements for hydrogenic atoms in any initial state enables efficient and accurate computation of the photoionization probability at any observation point without saddle point approximation, providing comprehensive three dimensional photoelectron angular distribution for linear and elliptical polarizations, that reveal the intricate features and provide insights on the photoionization characteristics such as angular dispersions, shift and splitting of photoelectron peaks from the tunneling or above threshold ionization(ATI) regime to non-adiabatic(intermediate) and multiphoton ionization(MPI) regimes. This facilitates the study of the effects of various laser pulse parameters on the photoelectron spectra and their angular distributions. The photoelectron peaks occur at multiples of 2ħω for linear polarization while odd-ordered peaks are suppressed in the direction perpendicular to the electric field. Short pulses create splitting and angular dispersion where the peaks are strongly correlated to the angles. For MPI and elliptical polarization with shorter pulses the peaks split into doublets and the first peak vanishes. The carrier envelope phase(CEP) significantly affects the ATI spectra while the Stark effect shifts the spectra of intermediate regime to higher energies due to interference.
The effects of xanthan gum (XG) and hydroxypropyl methylcellulose (HPMC) in sponge cakes were studied. Hydrocolloids enhanced the thickening effect in batter that affected the textural attributes of sponge cakes. During storage, the structural changes in XG-cake resulted in higher hardness compared to HPMC-cake. Similar to XG, HPMC also contributed moistness to cake. The moisture loss of cake containing XG was slower than HPMC-cake. FTIR study showed absorption of OH at region of 3600-2900 cm-1 that explained the strong interaction of water in cake containing XG compared to other cake formulations.
Reversible valves on centrifugal microfluidic platforms facilitate the automation of bioanalytical assays, especially of those requiring a series of steps (such as incubation) in a single reaction chamber. In this study, we present fixed elastic reversible (FER) valves and tunable elastic reversible (TER) valves that are easy to fabricate, implement and control. In the FER valve the compression of an elastic barrier/patch against a microchamber's outlet prevents the release of liquid. The valve sealing pressure was determined by adjusting the engraving depth of the valve-seat at which the elastic patch was located, this allows to set the sealing pressure during disc fabrication. In the TER valve, the patch compression value and sealing pressure is controlled by the penetration depth of a plastic screw into the valve-seat. The ER valves prevent liquid flow until the centrifugal force overcomes their sealing pressure. Moreover, at a constant spin speed, turning the screw of a TER valve reduces its sealing pressure and opens the valve. Therefore, the TER valve allows for controlling of the liquid transfer volume at various spin speeds. The FER and TER valves' behavior is mathematically described and equations for the prediction of their operation under centrifugal forces are provided. As a point-of-care (POC) application of ER valves, we have developed a microfluidic disc with a series of TER valves and peptide microarrays for automated multiplexed detection of five different proteins from a single serum sample.
The fourth rail transit is an interesting topic to be shared and accessed by the community within that area of expertise. Several ongoing works are currently being conducted especially in the aspects of system technical performances including the rail bracket component and the sensitivity analyses on the various rail designs. Furthermore, the lightning surge study on railway electrification is significant due to the fact that only a handful of publications are available in this regard, especially on the fourth rail transit. For this reason, this paper presents a study on the electrical performance of a fourth rail Direct Current (DC) urban transit affected by an indirect lightning strike. The indirect lightning strike was modelled by means of the Rusck model and the sum of two Heidler functions. The simulations were carried out using the EMTP-RV software which included the performance comparison of polymer-insulated rail brackets, namely the Cast Epoxy (CE), the Cycloaliphatic Epoxy A (CEA), and the Glass Reinforced Plastic (GRP) together with the station arresters when subjected by 30 kA (5/80 µs) and 90 kA (9/200 µs) lightning currents. The results obtained demonstrated that the GRP material has been able to slightly lower its induced overvoltage as compared to other materials, especially for the case of 90 kA (9/200 µs), and thus serves better coordination with the station arresters. This improvement has also reflected on the recorded residual voltage and energy absorption capacity of the arrester, respectively.
The junctionless nanowire transistor is a promising alternative for a new generation of nanotransistors. In this letter the atomic force microscopy nanolithography with two wet etching processes was implemented to fabricate simple structures as double gate and single gate junctionless silicon nanowire transistor on low doped p-type silicon-on-insulator wafer. The etching process was developed and optimized in the present work compared to our previous works. The output, transfer characteristics and drain conductance of both structures were compared. The trend for both devices found to be the same but differences in subthreshold swing, 'on/off' ratio, and threshold voltage were observed. The devices are 'on' state when performing as the pinch off devices. The positive gate voltage shows pinch off effect, while the negative gate voltage was unable to make a significant effect on drain current. The charge transmission in devices is also investigated in simple model according to a junctionless transistor principal.
Analyzed the effects of thermal radiation, chemical reaction, heat gener-
ation/absorption, magnetic and electric fields on unsteady flow and heat transfer of
nanofluid. The transport equations used passively controlled. A similarity solution is
employed to transformed the governing equations from partial differential equations to
a set of ordinary differential equations, and then solve using Keller box method. It was
found that the temperature is a decreasing function with the thermal stratification due to
the fact the density of the fluid in the lower vicinity is much higher compared to the upper
region, whereas the thermal radiation, viscous dissipation and heat generation enhanced
the nanofluid temperature and thermal layer thickness.
Microbial fuel cells (MFCs) have a high potential application for simultaneous wastewater treatment and electricity
generation. However, the choice of the electrode material and its design is critical and directly affect their performance.
As an electrode of MFCs, the anode material with surface modifications is an attractive strategy to improve the power
output. In this study, stainless steel (SS) and carbon steel (CS) was chosen as a metal anode, while graphite felt (GF)
was used as a common anode. Heat treatment was performed to convert SS, CS and GF into efficient anodes for MFCs.
The maximum current density and power density of the MFC-SS were achieved up till 762.14 mA/m2
and 827.25 mW/m2
,
respectively, which were higher than MFC-CS (641.95 mA/m2
and 260.14 mW/m2
) and MFC-GF (728.30 mA/m2
and 307.89
mW/m2
). Electrochemical impedance spectroscopy of MFC-SS showed better catalytic activity compared to MFC-CS and
MFC-GF anode, also supported by cyclic voltammetry test.
This study presents the electromagnetic (EM) characterization of a multiwalled carbon nanotubes (MWCNT)-silver nanoparticles (AgNP)-reinforced poly(vinyl alcohol) (PVA) hybrid nanocomposite fabricated via the solution mixing technique. Primarily, the structure and morphological properties of the PVA/MWCNT-AgNP hybrid nanocomposite are confirmed by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). The complex permittivity (ε*) and permeability (μ*), as well as the electromagnetic scattering parameters are measured using a PNA network analyzer equipped with X-band waveguide. The results showed an enhanced permittivity (ε' ≈ 25) value of the hybrid nanocomposite in the frequency range of 8-12 GHz. However, the permeability decreased to almost zero (μ' ≈ 0.4) since the inclusion of AgNP with an average particle size of 40 nm is not susceptible to magnetization and causes higher magnetic losses (tan δμ) than dielectric losses (tan δε). Remarkably, the hybrid nanocomposite reduced transmission of electromagnetic (EM) wave by nearly 60% in comparison to PVA/MWCNT. This is attributed to the enhanced absorption and reflection at the nanotubes, and metal-dielectric interfaces have induced multiple internal reflections owing to the porous structure of the nanocomposite. The prospect of the PVA/MWCNT-AgNP hybrid nanocomposite is favorable as a thin absorbing material for EM shielding applications.
The elliptic azimuthal anisotropy coefficient (v_{2}) is measured for charm (D^{0}) and strange (K_{S}^{0}, Λ, Ξ^{-}, and Ω^{-}) hadrons, using a data sample of p+Pb collisions collected by the CMS experiment, at a nucleon-nucleon center-of-mass energy of sqrt[s_{NN}]=8.16 TeV. A significant positive v_{2} signal from long-range azimuthal correlations is observed for all particle species in high-multiplicity p+Pb collisions. The measurement represents the first observation of possible long-range collectivity for open heavy flavor hadrons in small systems. The results suggest that charm quarks have a smaller v_{2} than the lighter quarks, probably reflecting a weaker collective behavior. This effect is not seen in the larger PbPb collision system at sqrt[s_{NN}]=5.02 TeV, also presented.
The ability of band offsets at multiferroic/metal and multiferroic/electrolyte interfaces in controlling charge transfer and thus altering the photoactivity performance has sparked significant attention in solar energy conversion applications. Here, we demonstrate that the band offsets of the two interfaces play the key role in determining charge transport direction in a downward self-polarized BFO film. Electrons tend to move to BFO/electrolyte interface for water reduction. Our experimental and first-principle calculations reveal that the presence of neodymium (Nd) dopants in BFO enhances the photoelectrochemical performance by reduction of the local electron-hole pair recombination sites and modulation of the band gap to improve the visible light absorption. This opens a promising route to the heterostructure design by modulating the band gap to promote efficient charge transfer.
Energy transfer in mixed convection unsteady magnetohydrodynamic (MHD) flow of an incompressible nanofluid inside a channel filled with saturated porous medium is investigated. The channel with non-uniform walls temperature is taken in a vertical direction under the influence of a transverse magnetic field. Based on the physical boundary conditions, three different flow situations are discussed. The problem is modelled in terms of partial differential equations with physical boundary conditions. Four different shapes of nanoparticles of equal volume fraction are used in conventional base fluids, ethylene glycol (EG) (C 2 H 6 O 2 ) and water (H 2 O). Solutions for velocity and temperature are obtained discussed graphically in various plots. It is found that viscosity and thermal conductivity are the most prominent parameters responsible for different results of velocity and temperature. Due to higher viscosity and thermal conductivity, C 2 H 6 O 2 is regarded as better convectional base fluid compared to H 2 O.
Air heating by solar collectors is renewable technology providing hot air for different purposes. The present research
emphasizes on analysis of energy, exergy and efficiency of a flat plate solar air heater. The analysis model was tested
on five different air mass flow rates of 0.5 (Natural), 1.31, 2.11, 2.72 and 3.03 kgs-1 under three different tilt angles of
25, 35 (Recommended) and 50o
. The data was replicated three times making a total of 45 treatments. A two factorial
completely randomized design was used to find if there is any significant difference among the treatments. The results
showed that the solar collector gave better performance at air mass flow of 3.03 kgs-1 under tilt of 35o
. At maximum
air mass flow rate of 3.03 kgs-1and optimum tilt angle of 35o
the maximum energetic efficiency of 51%, while minimum
exergetic efficiency of 24% and maximum overall efficiency of 71% were recorded. It was concluded that to get maximum
thermal efficiencies of 71% from flat plate solar collector used as an air heater must be operated at high air mass flow
rates of 3.03 kgs-1under 35o
tilt angle at Peshawar, Pakistan.
Wireless sensor networks (WSNs) can be used in agriculture to provide farmers with a large amount of information. Precision agriculture (PA) is a management strategy that employs information technology to improve quality and production. Utilizing wireless sensor technologies and management tools can lead to a highly effective, green agriculture. Based on PA management, the same routine to a crop regardless of site environments can be avoided. From several perspectives, field management can improve PA, including the provision of adequate nutrients for crops and the wastage of pesticides for the effective control of weeds, pests, and diseases. This review outlines the recent applications of WSNs in agriculture research as well as classifies and compares various wireless communication protocols, the taxonomy of energy-efficient and energy harvesting techniques for WSNs that can be used in agricultural monitoring systems, and comparison between early research works on agriculture-based WSNs. The challenges and limitations of WSNs in the agricultural domain are explored, and several power reduction and agricultural management techniques for long-term monitoring are highlighted. These approaches may also increase the number of opportunities for processing Internet of Things (IoT) data.
The need for power-efficient devices, such as smart sensor nodes, mobile devices, and portable digital gadgets, is markedly increasing and these devices are becoming commonly used in daily life. These devices continue to demand an energy-efficient cache memory designed on Static Random-Access Memory (SRAM) with enhanced speed, performance, and stability to perform on-chip data processing and faster computations. This paper presents an energy-efficient and variability-resilient 11T (E2VR11T) SRAM cell, which is designed with a novel Data-Aware Read-Write Assist (DARWA) technique. The E2VR11T cell comprises 11 transistors and operates with single-ended read and dynamic differential write circuits. The simulated results in a 45 nm CMOS technology exhibit 71.63% and 58.77% lower read energy than ST9T and LP10T and lower write energies of 28.25% and 51.79% against S8T and LP10T cells, respectively. The leakage power is reduced by 56.32% and 40.90% compared to ST9T and LP10T cells. The read static noise margin (RSNM) is improved by 1.94× and 0.18×, while the write noise margin (WNM) is improved by 19.57% and 8.70% against C6T and S8T cells. The variability investigation using the Monte Carlo simulation on 5000 samples highly validates the robustness and variability resilience of the proposed cell. The improved overall performance of the proposed E2VR11T cell makes it suitable for low-power applications.
This paper describes cooperate the co-absorbance (CdS QDs) and the plasmonic core-shell nanoparticles (Ag@PVP) of dye synthesized solar cells in which CdS QDs and Ag@PVP are incorporated into the TiO2 layer. Cooperative nanoparticles show superior behavior on enhancing light absorption in comparison with reference cells. Cooperated DSSC exhibits the best performance with the power conversion efficiency of 7.64% which is superior to that of the free-modified DSSC with the PCE of 5%. Detailed studies offer an effective approach to enhance the efficiency of dye synthesized solar cells.