Displaying publications 141 - 160 of 215 in total

Abstract:
Sort:
  1. Keshavarzifard M, Zakaria MP, Hwai TS, Yusuff FF, Mustafa S, Vaezzadeh V, et al.
    Mar Pollut Bull, 2014 Nov 15;88(1-2):366-72.
    PMID: 25173594 DOI: 10.1016/j.marpolbul.2014.08.014
    In this study, the surface sediments of the Malacca and Prai Rivers were analyzed to identify the distributions, and sources of Polycyclic Aromatic Hydrocarbons (PAHs). The total PAH concentrations varied from 716 to 1210 and 1102 to 7938 ng g(-1)dw in the sediments of the Malacca and Prai Rivers, respectively. The PAH concentrations can be classified as moderate and high level of pollution in the sediments of the Malacca and Prai Rivers, respectively. The comparison of PAHs with the Sediment Quality Guidelines (SQGs) indicates that the PAHs in the sediments of the Malacca and Prai Rivers may have the potential to cause adverse toxicity effects on the sampled ecosystems. The diagnostic ratios of individual PAHs indicate both petrogenic- and pyrogenic-origin PAHs with dominance of pyrogenic source in both rivers. These findings demonstrate that the environmental regulations in Malaysia have effectively reduced the input of petrogenic petroleum hydrocarbons into rivers.
    Matched MeSH terms: Petroleum/analysis
  2. Hamidi H, Mohammadian E, Junin R, Rafati R, Manan M, Azdarpour A, et al.
    Ultrasonics, 2014 Feb;54(2):655-62.
    PMID: 24075416 DOI: 10.1016/j.ultras.2013.09.006
    Theoretically, Ultrasound method is an economical and environmentally friendly or "green" technology, which has been of interest for more than six decades for the purpose of enhancement of oil/heavy-oil production. However, in spite of many studies, questions about the effective mechanisms causing increase in oil recovery still existed. In addition, the majority of the mechanisms mentioned in the previous studies are theoretical or speculative. One of the changes that could be recognized in the fluid properties is viscosity reduction due to radiation of ultrasound waves. In this study, a technique was developed to investigate directly the effect of ultrasonic waves (different frequencies of 25, 40, 68 kHz and powers of 100, 250, 500 W) on viscosity changes of three types of oil (Paraffin oil, Synthetic oil, and Kerosene) and a Brine sample. The viscosity calculations in the smooth capillary tube were based on the mathematical models developed from the Poiseuille's equation. The experiments were carried out for uncontrolled and controlled temperature conditions. It was observed that the viscosity of all the liquids was decreased under ultrasound in all the experiments. This reduction was more significant for uncontrolled temperature condition cases. However, the reduction in viscosity under ultrasound was higher for lighter liquids compare to heavier ones. Pressure difference was diminished by decreasing in the fluid viscosity in all the cases which increases fluid flow ability, which in turn aids to higher oil recovery in enhanced oil recovery (EOR) operations. Higher ultrasound power showed higher liquid viscosity reduction in all the cases. Higher ultrasound frequency revealed higher and lower viscosity reduction for uncontrolled and controlled temperature condition experiments, respectively. In other words, the reduction in viscosity was inversely proportional to increasing the frequency in temperature controlled experiments. It was concluded that cavitation, heat generation, and viscosity reduction are three of the promising mechanisms causing increase in oil recovery under ultrasound.
    Matched MeSH terms: Petroleum Pollution/prevention & control*
  3. Ismail S, Dadrasnia A
    PLoS One, 2015;10(4):e0120931.
    PMID: 25875763 DOI: 10.1371/journal.pone.0120931
    Environmental contamination by petroleum hydrocarbons, mainly crude oil waste from refineries, is becoming prevalent worldwide. This study investigates the bioremediation of water contaminated with crude oil waste. Bacillus salamalaya 139SI, a bacterium isolated from a private farm soil in the Kuala Selangor in Malaysia, was found to be a potential degrader of crude oil waste. When a microbial population of 108 CFU ml-1 was used, the 139SI strain degraded 79% and 88% of the total petroleum hydrocarbons after 42 days of incubation in mineral salt media containing 2% and 1% of crude oil waste, respectively, under optimum conditions. In the uninoculated medium containing 1% crude oil waste, 6% was degraded. Relative to the control, the degradation was significantly greater when a bacteria count of 99 × 108 CFU ml-1 was added to the treatments polluted with 1% oil. Thus, this isolated strain is useful for enhancing the biotreatment of oil in wastewater.
    Matched MeSH terms: Petroleum/analysis*; Petroleum/microbiology*
  4. Muhammad SA, Seow EK, Mohd Omar AK, Rodhi AM, Mat Hassan H, Lalung J, et al.
    Sci Justice, 2018 Jan;58(1):59-66.
    PMID: 29332695 DOI: 10.1016/j.scijus.2017.05.008
    A total of 33 crude palm oil samples were randomly collected from different regions in Malaysia. Stable carbon isotopic composition (δ13C) was determined using Flash 2000 elemental analyzer while hydrogen and oxygen isotopic compositions (δ2H and δ18O) were analyzed by Thermo Finnigan TC/EA, wherein both instruments were coupled to an isotope ratio mass spectrometer. The bulk δ2H, δ18O and δ13C of the samples were analyzed by Hierarchical Cluster Analysis (HCA), Principal Component Analysis (PCA) and Orthogonal Partial Least Square-Discriminant Analysis (OPLS-DA). Unsupervised HCA and PCA methods have demonstrated that crude palm oil samples were grouped into clusters according to respective state. A predictive model was constructed by supervised OPLS-DA with good predictive power of 52.60%. Robustness of the predictive model was validated with overall accuracy of 71.43%. Blind test samples were correctly assigned to their respective cluster except for samples from southern region. δ18O was proposed as the promising discriminatory marker for discerning crude palm oil samples obtained from different regions. Stable isotopes profile was proven to be useful for origin traceability of crude palm oil samples at a narrower geographical area, i.e. based on regions in Malaysia. Predictive power and accuracy of the predictive model was expected to improve with the increase in sample size. Conclusively, the results in this study has fulfilled the main objective of this work where the simple approach of combining stable isotope analysis with chemometrics can be used to discriminate crude palm oil samples obtained from different regions in Malaysia. Overall, this study shows the feasibility of this approach to be used as a traceability assessment of crude palm oils.
    Matched MeSH terms: Petroleum
  5. Zakaria ZA, Mahmood ND, Mamat SS, Nasir N, Omar MH
    Front Pharmacol, 2017;8:982.
    PMID: 29497375 DOI: 10.3389/fphar.2017.00982
    Methanol extract ofMuntingia calaburaL. (family Muntingiaceae) leaf has been reported to exert various pharmacological activities including hepatoprotection. The present study was carried out to identify the most effective hepatoprotective partition derived from the extract and to determine the mechanisms of action involved. The extract was partitioned using solvents with different polarity to yield petroleum ether (PEMC), ethyl acetate (EAMC), and aqueous (AQMC) extracts. Each extract, at 250 mg/kg, was subjected to the paracetamol (PCM)-induced hepatotoxic assay and several parameters such as liver weight, liver/body weight ratio, serum liver enzymes' level, and histopathological examinations were determined. Each partition was also tested for their antioxidant and anti-inflammatory potentials. The most effective extract (AQMC) was prepared in additional dose of 50 and 500 mg/kg, and then subjected to the same liver toxicity test in addition to the endogenous antioxidant enzymes assay. Moreover, AQMC was also subjected to the phytochemical screening and HPLC analysis. Overall, from the results obtained: AQMC exerted significant (p< 0.05): (i) antioxidant activity when assessed using the DPPH, SOD and ORAC assays with high TPC detected; (ii) anti-inflammatory activity via LOX, but not XO pathway; (iii) hepatoprotective activity indicated by its ability to reverse the effect of PCM on the liver weight and liver/body weight ratio, the level of serum liver enzymes (ALT, AST, and ALP), and activity of several endogenous antioxidant enzymes (SOD and CAT). Phytochemicals analyses demonstrated the presence of several flavonoid-based bioactive compounds such as gallic acid and quercetin, which were reported to possess hepatoprotective activity. In conclusion, AQMC exerts hepatoprotective activity against the PCM-induced toxicity possibly by having a remarkable antioxidant potential and ability to activate the endogenous antioxidant system possibly via the synergistic action of its phytoconstituents.
    Matched MeSH terms: Petroleum
  6. Adil M, Lee K, Mohd Zaid H, Ahmad Latiff NR, Alnarabiji MS
    PLoS One, 2018;13(2):e0193518.
    PMID: 29489897 DOI: 10.1371/journal.pone.0193518
    Recently, nano-EOR has emerged as a new frontier for improved and enhanced oil recovery (IOR & EOR). Despite their benefits, the nanoparticles tend to agglomerate at reservoir conditions which cause their detachment from the oil/water interface, and are consequently retained rather than transported through a porous medium. Dielectric nanoparticles including ZnO have been proposed to be a good replacement for EOR due to their high melting point and thermal properties. But more importantly, these particles can be polarized under electromagnetic (EM) irradiation, which provides an innovative smart Nano-EOR process denoted as EM-Assisted Nano-EOR. In this study, parameters involved in the oil recovery mechanism under EM waves, such as reducing mobility ratio, lowering interfacial tensions (IFT) and altering wettability were investigated. Two-phase displacement experiments were performed in sandpacks under the water-wet condition at 95°C, with permeability in the range of 265-300 mD. A crude oil from Tapis oil field was employed; while ZnO nanofluids of two different particle sizes (55.7 and 117.1 nm) were prepared using 0.1 wt. % nanoparticles that dispersed into brine (3 wt. % NaCl) along with SDBS as a dispersant. In each flooding scheme, three injection sequential scenarios have been conducted: (i) brine flooding as a secondary process, (ii) surfactant/nano/EM-assisted nano flooding, and (iii) second brine flooding to flush nanoparticles. Compare with surfactant flooding (2% original oil in place/OOIP) as tertiary recovery, nano flooding almost reaches 8.5-10.2% of OOIP. On the other hand, EM-assisted nano flooding provides an incremental oil recovery of approximately 9-10.4% of OOIP. By evaluating the contact angle and interfacial tension, it was established that the degree of IFT reduction plays a governing role in the oil displacement mechanism via nano-EOR, compare to mobility ratio. These results reveal a promising way to employ water-based ZnO nanofluid for enhanced oil recovery purposes at a relatively high reservoir temperature.
    Matched MeSH terms: Petroleum
  7. Tan SA, Goya L, Ramanathan S, Sulaiman SF, Alam M, Navaratnam V
    Food Res Int, 2014 Oct;64:387-395.
    PMID: 30011665 DOI: 10.1016/j.foodres.2014.06.040
    Extract from papaya leaves, a waste material from fruit farms in Malaysia was previously reported to possess remarkable antioxidative activities. In this study, papaya leaf extract was separated into fractions of different polarities [petroleum ether (PE), ethyl acetate (EA), n-butanol (NB) and water (W) fractions]. The aim of this research was to determine the most active fraction in terms of its chemopreventive effects towards oxidative stress and the chemical constituents involved. The cytoprotective nature of the papaya fractions was observed against t-BOOH-induced oxidative stress on HepG2 liver cell line. ROS assay indicated that only PE and EA effectively reduced the increment of radical due to the pro-oxidant, t-BOOH. Nevertheless, PE was a stronger ROS scavenger by demonstrating ROS reducing activity in a dose-dependent manner to the basal level. This fraction was also found to inhibit cell death caused by t-BOOH toxicity, attenuating lactate dehydrogenase enzyme leakage by more than 90% (p<0.05). In addition, gene expression of phase II antioxidant enzymes (hmox-1 and nqo-1) and their transcription factor (nrf-2) were shown to be upregulated upon PE treatment during a time-course study. A GC-MS fingerprint of the active fraction was subsequently obtained with standardization using the marker compound; α-tocopherol, a well known antioxidant. However, this pure compound was not as effective as its corresponding PE concentrations in ROS reduction. Hence, PE of papaya leaf extract was a strong antioxidant and cytoprotectant with tremendous potential to be harnessed into the next therapeutic remedy against oxidative stress of the liver.
    Matched MeSH terms: Petroleum
  8. Sharif Hossain ABM, Uddin MM, Fawzi M, Veettil VN
    Data Brief, 2018 Apr;17:1245-1252.
    PMID: 29845096 DOI: 10.1016/j.dib.2018.02.053
    The nano-cellulose derived nano-biofilm keeps a magnificent role in medical, biomedical, bioengineering and pharmaceutical industries. Plant biomaterial is naturally organic and biodegradable. This study has been highlighted as one of the strategy introducing biomass based nano-bioplastic (nanobiofilm) to solve dependency on petroleum and environment pollution because of non-degradable plastic. The data study was carried out to investigate the nano-biopolymer (nanocellulose) based nano-biofilm data from corn leaf biomass coming after bioprocess technology without chemicals. Corn leaf biomass was used to produce biodegradable nano-bioplastic for medical and biomedical and other industrial uses. Data on water absorption, odor, pH, cellulose content, shape and firmness, color coating and tensile strength test have been exhibited under standardization of ASTM (American standard for testing and materials). Moreover, the chemical elements of nanobiofilm like K+, CO3--, Cl-, Na+ showed standard data using the EN (166).
    Matched MeSH terms: Petroleum
  9. Ariffin Samsuri, Zainal Zakaria, Kamal Hafez Manaf, Issham Ismail
    MyJurnal
    Production Sharing Contract (PSC) is one of the petroleum agreements mode that
    are being utilized in many parts of the world in enabling exploration, development
    and production of the petroleum resources at the respective locations. It was first
    introduced in Indonesia in 1966, and followed by Malaysia, Vietnam, Thailand, and
    Brunei. One of interesting aspects of PSC management is the operatorship
    transferhandling when a PSC is nearing its expiry. When the time come, the
    current PSC contractor as operator has the option to relinquish it to the host
    authority to be handed over to other operator, farm it out to the other PSC
    contractor to reduce the risk exposure or continue operating under a new PSC
    terms. The most challenging will be to relinquish the operatorship to another
    operator whereby several complexities will need to be adequately addressed to
    ensure benefit preservation to the host authority, incoming operator and
    outgoing operator. Therefore there is a need to adhere to key factors or enablers
    to administer the operatorship transfer exercise if it occurs in the near future. The
    key enablers would be able to address the operatorship transfer exercise
    effectively with the objective to alleviate complications to the host authority,
    outgoing operator and incoming operator. With the emphasized in the PETRONAS
    Procedure & Guideline for Upstream Activities together with three case studies,
    this paper proposed several key enablers to be considered for a PSC successful
    operatorship transfer which is human resources, data management, asset
    reliability and integrity management, supply chain management and good
    relationship between parties. With identified key factors, it is hoped that any PSC
    operatorship transfer will be able to be managed smoothly and will ensure
    benefits to all parties concerned.
    Matched MeSH terms: Petroleum
  10. Al-Madhagi WM, Mohd Hashim N, Awad Ali NA, Alhadi AA, Abdul Halim SN, Othman R
    PeerJ, 2018;6:e4839.
    PMID: 29892499 DOI: 10.7717/peerj.4839
    Background: Peperomia belongs to the family of Piperaceae. It has different uses in folk medicine and contains rare compounds that have led to increased interest in this genus. Peperomia blanda (Jacq.) Kunth is used as an injury disinfectant by Yemeni people. In addition, the majority of Yemen's population still depend on the traditional remedy for serious diseases such as cancer, inflammation and infection. Currently, there is a deficiency of scientific evidence with regards to the medicinal plants from Yemen. Therefore, this study was performed to assess the chemical profile and in vitro antioxidant and cytotoxic activities of P. blanda.

    Methods: Chemical profiling of P. blanda was carried out using gas chromatography mass spectrometry (GCMS) followed by isolation of bioactive compounds by column chromatography. DPPH• and FRAP assays were used to evaluate antioxidant activity and the MTT assay was performed to estimate the cytotoxicity activity against three cancer cell lines, namely MCF-7, HL-60 and WEHI-3, and three normal cell lines, MCF10A, WRL-68 and HDFa.

    Results: X-ray crystallographic data for peperomin A is reported for the first time here and N,N'-diphenethyloxamide was isolated for the first time from Peperomia blanda. Methanol and dichloromethane extracts showed high radical scavenging activity with an IC50 of 36.81 ± 0.09 µg/mL, followed by the dichloromethane extract at 61.78 ± 0.02 µg/mL, whereas the weak ferric reducing activity of P. blanda extracts ranging from 162.2 ± 0.80 to 381.5 ± 1.31 µg/mL were recorded. In addition, petroleum ether crude extract exhibited the highest cytotoxic activity against all the tested cancer cell lines with IC50 values of 9.54 ± 0.30, 4.30 ± 0.90 and 5.39 ± 0.34 µg/mL, respectively. Peperomin A and the isolated mixture of phytosterol (stigmasterol and β-sitosterol) exhibited cytotoxic activity against MCF-7 and WE-HI cell lines with an IC50 of (5.58 ± 0.47, 4.62 ± 0.03 µg/mL) and (8.94 ± 0.05, 9.84 ± 0.61 µg/mL), respectively, compared to a standard drug, taxol, that has IC50 values of 3.56 ± 0.34 and 1.90 ± 0.9 µg/mL, respectively.

    Conclusion: The activities of P. blanda extracts and isolated compounds recorded in this study underlines the potential that makes this plant a valuable source for further study on anticancer and antioxidant activities.

    Matched MeSH terms: Petroleum
  11. Govender N, Senan S, Mohamed-Hussein ZA, Isa MNM, Yaakob Z, Ratnam W
    Data Brief, 2018 Dec;21:71-74.
    PMID: 30338276 DOI: 10.1016/j.dib.2018.09.081
    Jatropha curcas L. or the physic nut is a monoecious shrub belonging to the Euphorbiaceae family. The plant is an ideal feedstock for biodiesel production; oil-rich seed (37-42%), has a broad range of growth habitat such as arid, semi-arid and tropical and a relatively feasible process for conversion of crude oil into biodiesel. The major constraint affecting the success of large-scale J. curcas plantation is seed yield inconsistency. Numerous research projects conducted on J. curcas with integrated genetic, genomic and transcriptomic approaches have been applied on the leaf, apical meristem, flower, root and fruit tissues. However, to date, no genomics data of J. curcas shoot system are publicly available, despite its importance in understanding flowering, fruiting and seed set qualities targeted for yield improvement. Here, we present eighteen sets of shoot and inflorescence transcriptomes generated from J. curcas plants with contrasting yields. Raw reads of the RNA-seq data are found in NCBI׳s Sequence Read Archive (SRA) database with the accession number SRP090662 (https://www.ncbi.nlm.nih.gov/sra/?term=SRP090662). This transcriptomic data could be integrated with the present genomic resources for in depth understanding of J. curcas reproductive system.
    Matched MeSH terms: Petroleum
  12. Pham TV, Nguyen TT, Nguyen DT, Thuan TV, Bui PQT, Viet VND, et al.
    J Nanosci Nanotechnol, 2019 02 01;19(2):1122-1125.
    PMID: 30360214 DOI: 10.1166/jnn.2019.15926
    Recently, the graphite based materials have gained interest as excellent platforms to remove aqueous pollutants via adsorption routes. This is given that such materials possess large specific surface area and low density. In the present work, a comparative study of two facile and effective approaches is conventional thermal heating and microwave irradiation methods to fabricate expanded graphite from available flake graphite sources of Vietnam for oil-contaminated water purification. The as-prepared expanded graphite was characterized by using FT-IR, SEM, XRD and BET analysis. The results exhibited that expanded graphite has multilevel pore structures and the surface area of expanded graphite obtained from microwave irradiation and conventional heating was 147.5 (m²/g) and 100.97 (m²/g) under optimal processing conditions. The as-synthesized expanded graphite from the microwave irradiation method was found to have higher adsorption capacities for diesel oil, crude oil, and fuel oil compared to conventional heating method.
    Matched MeSH terms: Petroleum
  13. Jumat Salimon, Dina Azleema Mohd Noor, Nazrizawati A, Mohd Firdaus M, Noraishah A
    The crude oil of Malaysian castor bean Ricinus communis L. seed was extracted by Soxhlet method using hexane. The physicochemical characteristics of castor bean oil were evaluated. The results showed that Malaysian castor seeds contain a relatively high percentage of total lipids content; 43.3% (per dry weight), high iodine value (84.5 mg/g) and saponification value (182.96 mg/g). The seed oil moisture content, acid value and free fatty acid percentage (% FFA) were 0.2%, 4.88 mg/g and 3.4%, respectively. The unsaturated fatty acids (UFA) content were 97.5% of the total fatty acids composition. Ricinoleic acid comprises over 84% while other fatty acids present were linoleic (7.3%), oleic (5.5%), palmitic (1.3%), stearic (1.2%) and linolenic (0.5%), respectively. Five types of castor bean seed oil triacylglycerols were identified as triricinolein, RRR (84.1%), diricinoleoylstearoylglycerol, RRS (8.2%), diricinoleoyloleoyl-glycerol, RRO (5.6%), diricinoleoyllinoleoylglycerol, RRL (1.2%) and diricinoleoylpalmitoyl-glycerol, RRP (0.9%) respectively.
    Matched MeSH terms: Petroleum
  14. Ainon Hamzah, Amir Rabu, Raja Farzarul Hanim Raja Azmy, Noor Ainni Yussoff
    Sains Malaysiana, 2010;39:161-168.
    Four species of bacteria, Acinetobacter lwoffii, Aeromonas hydrophila, Pseudomonas aeruginosa and Pseudomonas putida, were isolated from soil contaminated with hydrocarbons and selected for the determination of growth requirements and the ability to degrade petroleum hydrocarbon. The bacteria were grown in mineral salt medium (MSM) supplemented with two types of crude oil, either Sumandak or South Angsi at 1% (v/v) concentration. The optimum pH for growth of A. hydrophila and P. aeruginosa was 6.5 when grown with Sumandak and South Angsi oil. For A. lwoffii and P. putida the optimum pH for growth with Sumandak and South Angsi oil was 6.5 or 7.0, respectively. The growth of P. aeruginosa was the highest in MSM when supplemented with 1% South Angsi oil and 0.5% tryptone at pH 6.5 while, in Sumandak oil the growth was the highest when yeast extract was added. Gas chromatography analysis showed that the South Angsi crude oil components of C12 to C25 were more extensively degraded by A. lwoffii after 24 h of incubation compared to the other bacteria over the same period.
    Matched MeSH terms: Petroleum
  15. Ainon Hamzah, Tavakoli A, Amir Rabu
    Sains Malaysiana, 2011;40:1231-1235.
    Toluene (C7H8) a hydrocarbon in crude oil, is a common contaminant in soil and groundwater. In this study, the ability to degrade toluene was investigated from twelve bacteria isolates which were isolated from soil contaminated with oil. Out of 12 bacterial isolates tested, most of Pseudomonas sp. showed the capability to grow in 1 mM of toluene compared with other isolates on the third day of incubation. Based on enzyme assays towards toluene monooxygenase, Pseudomonas aeruginosa UKMP-14T and Bacillus cereus UKMP-6G were shown to have the highest ability to degrade toluene. The toluene monoxygenase activity was analysed by using two calorimetric methods, Horseradish peroxidase (HRP) and indole-indigo. Both of the methods measured the production of catechol by the enzymatic reaction of toluene monooxygenase. In the HRP assay, the highest enzyme activity was 0.274 U/mL, exhibited by Pseudomonas aeruginosa UKMP-14T. However, for indole-indigo assay, Bacillus cereus UKMP-6G produced the highest enzyme activity of 0.291 U/ml. Results from both experiments showed that Pseudomonas aeruginosa UKMP-14T and Bacillus cereus UKMP-6G were able to degrade toluene.
    Matched MeSH terms: Petroleum
  16. Ainon Hamzah, Siti Nursyazana Md Salleh, Sukiman Sarmani
    Sains Malaysiana, 2014;43:1327-1332.
    Bioremediation of crude oil using biostimulation and/or bioaugmentation was done by simulation study in the green house under uncontrolled environment temperature. In this study, the soil with indigenous microbes was spiked with Tapis crude oil at 200 g/kg. The microbial density of the amended soils was augmented by addition of fresh inoculum of microbial consortium which consist of Pseudomonas aeruginosa UKMP-14T, Acinetobacter baumannii UKMP-12T and seed culture two strains of fungi, Trichoderma virens UKMP-1M and Trichoderma virens UKMP-2M at ratio 1:1:1:1 (v/w). The amendment soil was added with 20% (v/w) of standardize consortium inoculum, 20% (w/w) of dried empty fruit bunch (EFB) and the effect of EFB was compared with 0.7% commercial fertilizer (v/w) which contain NPK (8:8:1). Soil with indigenous microbes was used as a control. Results showed total petroleum hydrocarbon (TPH) degradation for treatment added with NPK fertilizer was 70.36%, addition with EFB bulking agent 68.86% and addition of both NPK and EFB was 100% at day 30 of incubation. The control plot, 62% of TPH degradation was achieved after 30 days incubation.
    Matched MeSH terms: Petroleum
  17. Teo KT, Hassan A, Gan SN
    Polymers (Basel), 2018 Dec 11;10(12).
    PMID: 30961299 DOI: 10.3390/polym10121374
    Palm fatty acid distillate (PFAD), is a by-product of the crude palm oil refining process. It comprises mainly of free fatty acids-around 45% palmitic and 33% oleic acids-as the major components. Ultra-violet (UV) curable urethane acrylate (UA) oligomers could be synthesized from PFAD, by the following procedure. A hydroxyl terminated macromer was first prepared by reacting PFAD with a mixture of isophthalic acid, phthalic anhydride, neopentagylcol (NPG), and pentaerythritol. The macromer was then reacted with 2-hydroxylethylacrylate (2HEA) and toluene diisocynate (TDI) to generate a resin, containing acrylate side chains for UV curable application. A series of UA resins were prepared by using 15, 25, 45, 55, and 70% of PFAD, respectively. The UA resin has Mw in the range of 3,200 to 27,000. They could be cured by UV irradiation at an intensity of 225 mW/cm². Glass transition temperature (Tg) of the cured film was measured by differential scanning calorimeter (DSC), and hardness of the film was determined by a pendulum hardness tester, according to American Society for Testing and Materials (ASTM)4366. The resins were used in a wood-coating application. All of the cured films showed good adhesion, hardness, and chemical resistance except for the one using the 70% PFAD, which did not cure properly.
    Matched MeSH terms: Petroleum
  18. Hao, Lim Zhen, Hikmat Said Al-Salim, Norida Ridzuan
    MyJurnal
    The continuous depletion of global oil reserves with the propensity for light distillates
    propels the oil and gas industry to explore heavier fractions of crude oils with significant
    amount of paraffin waxes. However, the precipitation and deposition of waxes during the
    transportation of these waxy crude oils in the pipelines contribute to several issues, such as
    the flowability reduction, excessive pumping cost, and wax gel formation, that adversely
    affect the supposedly steady offshore oil production. As a result, substantial resources are
    expended to resolve these flow assurance problems. The wax inhibitors and pour point
    depressants are developed and modified to meet the wax remediation criteria. Essentially,
    the wax crystals are formed through the nucleation, growth, and agglomeration processes,
    while the deposition of these waxes occurs via molecular diffusion and shear dispersion.
    The wax inhibitors are able to control the growth of wax crystals through nucleation, cocrystallization,
    adsorption, and dispersion interactions. This paper particularly assessed
    the following compounds: (1) polymeric wax inhibitors, (2) nano-hybrid pour point
    depressants, (3) organic solvents, and
    (4) surfactants. Given the significance of
    these compounds in the deposition and
    precipitation of waxes, it is imperative to
    comprehensively explore the types and
    nature of these compounds and their recent
    applications as well as to critically assess
    their strengths and drawbacks, which were
    addressed in this paper. Furthermore, the
    challenges of using these compounds and the factors that govern their efficiencies were also discussed. Accordingly, the carbon
    length and the molecular weight of both paraffin waxes and wax inhibitors are among the
    most influential factors.
    Matched MeSH terms: Petroleum
  19. Mohd Nazri Idris, Abdul Razak Daud, Nur Akma Mahat, Mohd Hafizuddin Ab Ghani, Norinsan Kamil Othman, Fathul Karim Sahrani
    Sains Malaysiana, 2015;44:1593-1598.
    The performance of pipeline system used in petroleum industry is crucially declined by natural microbial activities and
    demanding extra operational cost. Requirement on high capability of functional substances is attracting worldwide
    research interest. The aim of this paper was to study the effectiveness of benzyltriethylammonium chloride (BTC) on
    reducing the activity of a consortium bacteria consisting of sulfate-reducing bacteria (C-SRB). C-SRB was isolated from
    tropical crude oil and enumeration of this consortium was measured by viable cell count technique. The effectiveness of
    BTC was calculated from potentiodynamic polarization method and biofilm analysis was performed by scanning electron
    microscope. The viable cell count technique indicated that the maximum growth of C-SRB was approximately 160 trillion
    CFU/mL at 7 days incubation period. BTC was capable of reducing biocorrosion activity due to adsorption process and
    mitigating SRB species. Biofilm analysis has proven that C-SRB activity is minimized due to less presence of bacterial
    growth, extracellular polymeric substances and corrosion product. In conclusion, BTC is capable to inhibit C-SRB activity
    on biocorrosion of carbon steel pipeline.
    Matched MeSH terms: Petroleum
  20. Akrima Abu Bakar, Muhammad Khairool Fahmy Mohd Ali, Norhazilan Md. Noor, Nordin Yahaya, Mardhiah Ismail, Ahmad Safuan A. Rashid
    Sains Malaysiana, 2017;46:1323-1331.
    Baram Delta Operation had been producing oil and gas since 1960's and serious pipelines failure was reported in the year of 2005. The final investigation has concluded that one of the species of bacteria that has been identified to cause microbiologically influenced corrosion, specifically known as sulfate reducing bacteria (SRB) was found to be one of the potential contributing factors to the incidents. This work investigates the potential use of ultraviolet (UV) radiation to inhibit the SRB consortium that was cultivated from the crude oil in one of the main trunk lines at Baram Delta Operation, Sarawak, Malaysia. The impact of UV exposure to bio-corrosion conditions on carbon steel coupon in certain samples for 28 days was discussed in this study. The samples were exposed to UV radiation based on variations of parameters, namely: time of UV exposure; and power of UV lamp. The significant changes on the amount of turbidity reading and metal loss of the steel coupon were recorded before and after experiment. The results showed that SRB growth has reduced rapidly for almost 90% after the UV exposure for both parameters as compared to the abiotic samples. Metal loss values were also decreased in certain exposure condition. Additionally, field emission scanning electron microscopy (FESEM) coupled with energy dispersive spectroscopy (EDS) was performed to observe the biofilm layer formed on the metal surface after its exposure to SRB. The evidence suggested that the efficiency of UV treatment against SRB growth could be influenced by the particular factors studied
    Matched MeSH terms: Petroleum
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links