This paper describes the influence of different factors on toughness of beef semitendinosus (ST) by means of low temperature-long time cooking with single-stage (60 °C, 65 °C, 70 °C, and 75 °C for 6 h and 12 h) and two-stage sous-vide procedure (45 + 60 °C, 45 + 65 °C, 45 + 70 °C, and 45 + 75 °C; 49 + 60 °C, 49 + 65 °C, 49 + 70 °C, and 49 + 75 °C for 3 h at the first temperature, and either 3 or 9 h at the second temperature). Reduced toughness of ST beef steak muscle could be attained in 6 h at 60 °C and 45 + 60 °C were due from the minimum shrinkage of sarcomere as well as lower perimysial thickness, cooking loss, and elastic modulus. Collagen solubility showed a positive correlation to the toughness values. The relationship between proteolytic activity and shear force can be seen after 12 h of cooking duration. For the other quality attributes, two stepped cooking temperature-time combination seems to be more effective in preserving the redness values and water content than a single-stage sous-vide method.
The goal of this study was to validate the commercial feasibility of a novel casing formed from chitosan containing cinnamaldehyde (2.2%, w/v), glycerol (50%, w/w) and Tween 80 (0.2% w/w) under traditional sausage manufacturing conditions. Meat batter was stuffed into both chitosan and collagen (control) casings and cooked in a water bath. Before and after cooking, both casings were compared for mechanical, barrier, and other properties. Compared to collagen, the chitosan casing was a better (P≤0.05) barrier to water, oxygen, liquid smoke, and UV light. In mechanical and other properties, the chitosan casing had higher (P≤0.05) tensile strength, lower (P≤0.05) elongation at break and tensile energy to break, and better (P≤0.05) transparency whereas a similar (P>0.05) water solubility to the collagen casing. Overall, the chitosan casing was less affected by sausage manufacturing conditions than the collagen casing, indicating that chitosan casing has potential as an alternative to the current collagen casing in the manufacture of sausages.
Heterocyclic amines (HCAs) are carcinogenic food toxicants formed in cooked meats, which may increase the risk of cancer development in humans. Therefore, in this study, the effect of stingless bee honey from different botanical origins on the formation of HCAs in grilled beef satay was investigated. HCAs concentration in grilled beef satay was determined by using high performance liquid chromatography (HPLC). In total, six of the most toxigenic HCAs representing aminoimidazo-azaarenes (AIAs) (MeIQx, 4,8-DiMeIQx, and PhIP) and amino carbolines (norharman, harman, and AαC) groups were identified in all the beef samples investigated. A significant reduction in HCAs was observed in grilled beef marinated in honey as compared to beef samples marinated in table sugar (control), in which the reduction of 95.14%, 88.45%, 85.65%, and 57.22% was observed in gelam, starfruit, acacia, and Apis honey marinades, respectively. According to the partial least squares regression (PLS) model, the inhibition of HCAs in grilled beef was shown to be significantly correlated to the antioxidant activity (IC50) of the honey samples. Therefore, the results of this study revealed that the addition of stingless bee honey could play an important role in reducing HCAs in grilled beef.
Consumption of white rice predisposes some Asian populations to increased risk of type 2 diabetes. We compared the postprandial glucometabolic responses to three newly-developed crossbred red rice variants (UKMRC9, UKMRC10, UKMRC11) against three selected commercial rice types (Thai red, Basmati white, Jasmine white) using 50-g carbohydrate equivalents provided to 12 normoglycaemic adults in a crossover design. Venous blood was drawn fasted and postprandially for three hours. Glycaemic (GI) and insulin (II) indices, incremental areas-under-the-curves for glucose and insulin (IAUCins), indices of insulin sensitivity and secretion, lactate and peptide hormones (motilin, neuropeptide-Y, orexin-A) were analyzed. The lowest to highest trends for GI and II were similar i.e., UKMRC9 < Basmati < Thai red < UKMRC10 < UKMRC11 < Jasmine. Postprandial insulinaemia and IAUCins of only UKMRC9 were significantly the lowest compared to Jasmine. Crude protein and fiber content correlated negatively with the GI values of the test rice. Although peptide hormones were not associated with GI and II characteristics of test rice, early and late phases of prandial neuropeptide-Y changes were negatively correlated with postprandial insulinaemia. This study indicated that only UKMRC9 among the new rice crossbreeds could serve as an alternative cereal option to improve diet quality of Asians with its lowest glycaemic and insulinaemic burden.
This cross-sectional study assessed household food insecurity among low-income rural communities and examined its association with demographic and socioeconomic factors as well as coping strategies to minimize food insecurity. Demographic, socioeconomic, expenditure and coping strategy data were collected from 200 women of poor households in a rural community in Malaysia. Households were categorized as either food secure (n=84) or food insecure (n=116) using the Radimer/Cornell Hunger and Food Insecurity instrument. T-test, Chi-square and logistic regression were utilized for comparison of factors between food secure and food insecure households and determination of factors associated with household food insecurity, respectively. More of the food insecure households were living below the poverty line, had a larger household size, more children and school-going children and mothers as housewives. As food insecure households had more school-going children, reducing expenditures on the children's education is an important strategy to reduce household expenditures. Borrowing money to buy foods, receiving foods from family members, relatives and neighbors and reducing the number of meals seemed to cushion the food insecure households from experiencing food insufficiency. Most of the food insecure households adopted the strategy on cooking whatever is available at home for their meals. The logistic regression model indicates that food insecure households were likely to have more children (OR=1.71; p<0.05) and non-working mothers (OR=6.15; p<0.05), did not own any land (OR=3.18; p<0.05) and adopted the strategy of food preparation based on whatever is available at their homes (OR=4.33; p<0.05). However, mothers who reported to borrow money to purchase food (OR=0.84; p<0.05) and households with higher incomes of fathers (OR=0.99; p<0.05) were more likely to be food secure. Understanding the factors that contribute to household food insecurity is imperative so that effective strategies could be developed and implemented.
In order to evaluate the frying performance of palm-based solid frying shortening against standard olein, the fresh potato chips were fried in both frying media using an open fryer. After frying the chips for 40 h in an open batch fryer, it was found that the frying quality of palm-based solid frying shortening was better than standard palm olein in terms of Free Fatty Acid (FFA) values, Total Polar Content (TPC) and Total Polymeric Material (TPM). Solid shortening gave FFA, TPC and TPM values of 0.7, 15.3 and 2.67%, respectively, whilst standard palm olein gave values for FFA, TPC and TPM of 1.2, 19.6 and 3.10%, respectively. In terms of sensory mean scores, sensory panelists preferred the color of potato chips fried in solid shortening on the first day of frying, while on the third and fifth day of frying there were no significant differences (p < 0.05) in the sensory scores of fried products in both frying mediums. However, on the fifth day of frying, panelists gave higher scores in terms of taste, flavor and crispness for potato chips fried in solid shortening. These findings show that the palm-based solid shortening is better than palm olein when used for deep fat frying in terms of FFA values, total polar content and total polymeric material, especially for starch-based products such as potato chips. The result also shows that, in terms of sensory mean scores, after frying for 40 h, the sensory panelists gave higher scores in terms of taste, flavor and crispiness for potato chips fried in palm-based solid shortening.
Changes of aroma constituents of palm olein and selected oils after frying French fries have been studied. The aroma constituents of used oils were collected using a solid-phase microextraction (SPME) headspace technique with an absorbent of a divinylbenzene/carboxen (DVB/CAR) (50/30 microm) on polydimethylsiloxane (PDMS) fibre. The extracted volatiles were desorbed from the fibre in the injection port of the gas chromatograph at 250 degrees C and the aroma constituents were identified by GC-MS. Analytical data showed that volatile constituents of palm olein, soybean oil, corn oil and sunflower oil changed while frying continued from 2 to 40 h, respectively. In palm olein, the 2t,4t-decadienal content decreased from 14.7 to 5.5 microg g(-1) (40 h) whilst hexanal increased from 7.9 microg g(-1) (2 h) to 29.2 microg g(-1) (40 h), respectively. Similar result was also obtained from soybean oil after frying French fries. The 2t,4t-decadienal content decreased from 15.9 microg g(-1) (2 h) to 3.2 microg g(-1) after 40 h frying whilst hexanal increased from 10.2 microg g(-1) (2 h) to 34.2 microg g(-1) (40 h). Meanwhile, in corn oil, it was found that 2t,4t-decadienal decreased from 15.6 microg g(-1) (2 h) to 3.2 microg g(-1) (40 h) whilst hexanal increased from 11.3 microg g(-1) (2 h) to 33.8 microg g(-1) when frying time reached 40 h. In sunflower oil, it was found that 2t,4t-decadienal, decreased from 16.8 microg g(-1) (2 h) to 1.2 microg g(-1) (40 h) while hexanal increased from 9.5 microg g(-1) (2 h) to 32.4 microg g(-1) when frying time reached 40 h. It also showed that used oils exhibited off-odour characteristics due to the increasing amount ofhexanal while their freshness characteristics diminished due to the decreasing amount of 2t, 4t-decadienal.
This study was conducted to determine the proximate composition and four micronutrients (Cd, Cu, Mn and Zn) of Indian Mackerel (Rastrelliger kanagurta), Eel (Monopterus albus) and Cockle (Anadara granosa). All fish and shellfish were purchased from local fish market in Kuantan city. All samples of each species were mixed and divided into two groups based on random selection. Each group were again divided into 3 sub-groups which were considered as replications. The first group were kept uncooked. The second group were fried in a beaker of 400 mL palm cooking oil capacity at a temperature approximately of 180 degrees C for a 15 min period. Both raw and fried samples were analysed following standard methods to determine protein, lipid, ash, moisture, carbohydrate, Cd, Cu, Mn and Zn contents. Results showed that protein content was higher in Indian mackerel and eel than cockle while overall Cd, Cu, Mn and Zn contents were higher in cockle than Indian mackerel and eel. Therefore, fish is better than shellfish in the nutritional point of view. Fried fish and shellfish had very high fat content. Therefore, frying cannot be recommended to prepare a healthy diet. More research is needed including all cooking methods of fish to know the nutritional changes by each cooking method. Fish contains many important fatty acids and amino acids which might be lost during frying. Therefore, future study should include the effects of different cooking methods on amino acids and fatty acids compositions of fish and shellfish.
Consumption of corn oil for cooking purpose is gaining popularity. The present study examined the effect of heated corn oil on blood pressure and its possible mechanism in experimental rats. Thirty male Sprague-Dawley rats were randomly divided into 5 groups and were fed with the following diets, Group I was fed with basal diet only; whereas group II,III,IV and V were fed with basal diet fortified with 15% (w/w) either fresh, once-heated, five-times-heated or ten-times-heated corn oil, respectively for 16 weeks. Body weight, blood pressure were measured at baseline and weekly interval for 16 weeks. Inflammatory biomarkers which included soluble intracellular adhesion molecules (sICAM), soluble vascular adhesion molecules (sVCAM) and C reactive protein (CRP), were measured at baseline and the end of 16 weeks. The rats were sacrificed and thoracic aorta was taken for measurement of vascular reactivity. There was significant increase in the blood pressure in the groups fed with heated once, five-times (5HCO) and ten-times-heated corn oil (10-HCO) compared to the control. The increase in the blood pressure was associated with an increase in CRP, sICAM and sVCAM, reduction in vasodilatation response to acetylcholine and greater vasoconstriction response to phenylephrine. The results suggest that repeatedly heated corn oil causes elevation in blood pressure, vascular inflammation which impairs vascular reactivity thereby predisposing to hypertension. There is a need to educate people not to consume corn oil in a heated state.
Tapioca starch, poly(lactic acid) and Cloisite 10A nanocomposite foams were prepared by twin screw extrusion. Residence time distribution (RTD) in an extruder is a useful means of determining optimal processing conditions for mixing, cooking and shearing reactions during the process. RTD was obtained by inputting a pulse-like stimulus and measuring its profile at the exit or other point in the extruder. During processing, after the steady state had been reached, a fixed amount of tracer was instantaneously fed into the extruder and its concentration was measured from the samples collected at fixed time intervals in the extruder exit. The tracer concentration was the value of the redness, a* was used as a measure of red colour intensity of the concentration of tracer in the extrudate. Meanwhile, the effects of two screw configurations (compression and mixing screws) and two barrel temperatures (150 and 160ºC) on RTD of nanocomposite foams were also studied. The influences of screw configurations and barrel temperatures on RTD were analyzed using the mean residence time (MRT) and variance. Screw configurations and temperatures had significant effects (P
Elderly are exposed to physical impairment. This has a strong impact on their daily activities including
frying, which is one of the most popular cuisine preparations. The stove height and work envelope
are two major ergonomic issues in performing cooking task. There has been little research focusing
on Malaysian elderly task performing in addressing these issues. The objectives of this study were to
identify the acceptable stove height and depth and to determine the working envelope among Malaysian
elderly using anthropometric data. A total of 55 Malaysian elderly (25 male and 30 female) aged between
60 to 85 years participated in this study. Five body measurements were taken from each subject using
an anthropometer. The measurements are stature height, shoulder height, arm span, arm reach forward
and waist height. Apart from these anthropometric measurements, their present stove height was also
measured. The acquisition of stove height dimensions was performed through a series of door to door
visit of the elderly homes in Kg. Sg. Merab. These variables were used to estimate the elderly working
envelope and determine the stove height, width and depth. Data were analysed using SPSS software. The
waist height dimension was to estimate the stove height, the arm reach forward for the depth and the arm
span for the length of the table-top where the stove was placed. Meanwhile the stature and shoulder height
were used for estimating the position of the overhead compartment or placement of cooking utensils.
The 5
th
percentile was chosen since it is appropriate to accommodate 90% of the studied population. The 5
th
percentile was also applied for the setting
of the working envelope so as to provide better
reaching tolerances. Meanwhile, standard was used
to compare the present state of the studied kitchen
setting. The results show that 56.4% of the elderly
waist height is lower than the standard table-top
height which is 36 inches (91.4cm) and 36.4% of the stove height was found higher than that of the standard. This could apparently cause fatigue and
discomfort to shoulders, the neck, the arm and the back of the user. Anthropometrics measurements can
be used for estimating the stove height, length and depth. These could also calculate a space taken for
certain physical activities, such as frying task envelope. Providing a good combination of stove height,
length, depth and ergonomic working envelope could hopefully improve the elderly cooking task and
increase their quality of life.
Matched MeSH terms: Cooking; Cooking and Eating Utensils
An experimental study was performed to determine the drying characteristics of dried papaya using different drying methods. They were dried using several methods, such as sun drying, solar drying, oven drying, and microwave drying. The effects of different operating conditions on physical quality attributes were investigated. The papaya were cut into different thicknesses and cooked in sugar syrup with different sugar concentration for 24 hours. Three different temperature settings were used in oven and microwave drying. The drying curve and drying rate of each method, temperature, sample
thickness and sugar concentration were studied. The drying times were found as in 6-15 minutes, 5 to 11 h, 10 to 18 h, and 14 to 23 h for the microwave, oven, sun and solar drying, respectively. The drying time increased with the increase of sample thickness and sugar concentration, as well as with the decrease of the drying temperature. In this study, quality attributes like colours and textural property of dried papaya were explored. Among the various methods of the drying characteristics
of papaya halwa, oven drying was preferred with the optimum sample in 5 mm thickness and at the air temperature of 70ºC as it saved up to 40% of the drying time as compared to other methods, except microwave, and produced acceptable physical quality of product.
This work describes the effects of different cooking temperatures in repetitive cooking-chilling (RCC) process on resistant starch (RS) content in fish crackers prepared in a ratio of 1:1 fish to sago starch formulation. In this work, three sets of four RCC cycles were performed on fish crackers, in which each set was cooked at fixed temperatures of 100, 115 and 121°C, respectively. The chilling temperature was fixed at 4°C in all cases. Subjecting the fish crackers to a higher cooking temperature for up to 4 cycles of RCC can increase the RS content. However, quality degradation was observed in the characteristics of the fish crackers. During the first RCC cycle, cooking at a higher temperature had caused the crackers to crack and burst. Besides, defragmentation to the shape of the fish cracker gels was also observed during the first RCC cycle, coupled with softer texture and high moisture content. When the products were subjected to frying, their linear expansion decreased, the texture became harder and the colour turned darker. This work demonstrated that the application of higher cooking temperature up to 4 RCC cycles was able to enhance the RS content in the fish crackers, but it was less able to attain the product's perfect shape. On the contrary, fish crackers that were exposed to lower cooking temperatures contained lower RS but with less shape damage.
In this study, various methods and applications of flat plate solar collectors are discussed and pictorial representations are presented. Low temperature applications of flat plate collectors are identified in solar cooking, solar water heating, space and air heating, industrial heating plants and in agricultural produce drying processes. Basic equations, as presented by many researchers in the performances of flat plate collectors, are also presented. The review discusses the analysis of losses from flat plate collectors towards obtaining the overall heat loss coefficient which indicate the performance of flat plate collectors.
MAIN CONCLUSION: Bambara groundnut has the potential to be used to contribute more the climate change ready agriculture. The requirement for nitrogen fixing, stress tolerant legumes is clear, particularly in low input agriculture. However, ensuring that existing negative traits are tackled and demand is stimulated through the development of markets and products still represents a challenge to making greater use of this legume. World agriculture is currently based on very limited numbers of crops, representing a significant risk to food supplies, particularly in the face of climate change which is expected to increase the frequency of extreme events. Minor and underutilised crops can help to develop a more resilient and nutritionally dense future agriculture. Bambara groundnut [Vigna subterranea (L.) Verdc.[, as a drought resistant, nitrogen-fixing, legume has a role to play. However, as with most underutilised crops, there are significant gaps in knowledge and also negative traits such as 'hard-to-cook' and 'photoperiod sensitivity to pod filling' associated with the crop which future breeding programmes and processing methods need to tackle, to allow it to make a significant contribution to the well-being of future generations. The current review assesses these factors and also considers what are the next steps towards realising the potential of this crop.
Factors contributing to foodborne illnesses in Malaysia were identified as insanitary food handling procedures and lack of hygiene in food preparation area. Food safety at home is a critical point as consumers represent the final step in food preparation and prevention of foodborne diseases. This study aims to investigate the food safety knowledge, attitude and self-reported practices among consumers in Malaysia. An online survey was conducted, and data were analysed using descriptive statistics and exploratory factor analysis. A model linking food safety knowledge and attitude and their direct effects on practices were confirmed using structural equation modelling (SEM). The proposed model fulfilled the goodness of fit indices and is deemed acceptable. Respondents demonstrate good level of food safety knowledge and positive attitudes and self-reported practices. Food safety knowledge has a negative and insignificant relationship with food safety practices (β1 = -0.284, p>0.05) while attitude significantly affects food safety practices (β1 = 0.534, p<0.05). The findings clearly indicate that food safety knowledge does not directly affect food safety practices This is also the first study to provide new empirical findings on thermometer usage among consumers in Malaysia. This study establishes an important point of reference where consumers use visual appearances to determine if food is thoroughly cooked and practice washing raw chicken prior to cooking. Food safety practices at home play a critical role in protecting consumers in reducing risks of foodborne illnesses.
Globally, around three billion people depend upon solid fuels such as firewood, dry animal dung, crop residues, or coal, and use traditional stoves for cooking and heating purposes. This solid fuel combustion causes indoor air pollution (IAP) and severely impairs health and the environment, especially in developing countries like Pakistan. A number of alternative household energy strategies can be adopted to mitigate IAP, such as using liquefied petroleum gas (LPG), natural gas, biogas, electric stoves, or improved cook stoves (ICS). In this study, we estimate the benefit-cost ratios and net present value of these interventions over a ten-year period in Pakistan. Annual costs include both fixed and operating costs, whereas benefits cover health, productivity gains, time savings, and fuel savings. We find that LPG has the highest benefit-cost ratio, followed by natural gas, while ICS has the lowest benefit-cost ratio. Electric stoves and biogas have moderate benefit-cost ratios that nevertheless exceed one. To maximize the return on cleaner burning technology, the government of Pakistan should consider encouraging the adoption of LPG, piped natural gas, and electric stoves as means to reduce IAP and adopt clean technologies.
Conocarpus fiber is an abundantly available and sustainable cellulosic biomass. With its richness in cellulose content, it is potentially used for manufacturing microcrystalline cellulose (MCC), a cellulose derivative product with versatile industrial applications. In this work, different samples of bleached fiber (CPBLH), alkali-treated fiber (CPAKL), and acid-treated fiber (CPMCC) were produced from Conocarpus through integrated chemical process of bleaching, alkaline cooking, and acid hydrolysis, respectively. Characterizations of samples were carried out with Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDX), Fourier Transform Infrared-Ray (FTIR), X-ray Diffraction (XRD), Thermogravimetric (TGA), and Differential Scanning Calorimetry (DSC). From morphology study, the bundle fiber feature of CPBLH disintegrated into micro-size fibrils of CPMCC, showing the amorphous compounds were substantially removed through chemical depolymerization. Meanwhile, the elemental analysis also proved that the traces of impurities such as cations and anions were successfully eliminated from CPMCC. The CPMCC also gave a considerably high yield of 27%, which endowed it with great sustainability in acting as alternative biomass for MCC production. Physicochemical analysis revealed the existence of crystalline cellulose domain in CPMCC had contributed it 75.7% crystallinity. In thermal analysis, CPMCC had stable decomposition behavior comparing to CPBLH and CPAKL fibers. Therefore, Conocarpus fiber could be a promising candidate for extracting MCC with excellent properties in the future.
In this study, we fabricated a modified biomaterial based on chitosan and gelatin, which is an intrinsic hydrophilic membrane for oil-water separation to clean water contamination by oil. Modification of the membrane with a non-toxic natural crosslinker, genipin, significantly enhanced the stability of the biopolymer membrane in a water-based medium towards an eco-friendly environment. The effects of various compositions of genipin-crosslinked chitosan-gelatin membrane on the rheological properties, thermal stability, and morphological structure of the membrane were investigated using a dynamic rotational rheometer, thermogravimetry analysis, and chemical composition by attenuated total reflectance spectroscopy (ATR). Modified chitosan-gelatin membrane showed completely miscible blends, as determined by field-emission scanning electron microscopy, differential scanning calorimetry, and ATR. Morphological results showed membrane with establish microstructure to further experiment as filtration product. The membranes were successfully tested for their oil-water separation efficiencies. The membrane proved to be selective and effective in separating water from an oil-water mixture. The optimum results achieved a stable microporous structure of the membrane (microfiltration) and a separation efficiency of above 98%. The membrane showed a high permeation flux, generated as high as 698 and 420 L m-2 h-1 for cooking and crude oils, respectively. Owing to its outstanding recyclability and anti-fouling performance, the membrane can be washed away easily, ensuring the reusability of the prepared membrane.
Burgers were prepared using duck surimi-like material (DSLM) with polydextrose added (SL) and DSLM with sucrose-sorbitol added (SS), and the properties of these burgers were compared with those of burgers made of chicken meat (CB) and duck meat (DB). Quality characteristics such as chemical composition, cooking loss, diameter shrinkage, color, and texture were measured. The DB had a lower moisture content (55.58%) and higher fat content (21.44%) and cooking loss (11.01%) compared with other samples, whereas CB, SS, and SL did not differ significantly in moisture (65.21-66.10%) and fat (10.42-11.16%) content or cooking loss (5.32-6.15%). The SS and SL were positioned below CB and above DB in terms of hardness, chewiness, and springiness. Ten trained panelists assessed the burgers using quantitative descriptive analysis. Among the burgers, CB had the greatest brightness of color, hardness, springiness, and chewiness. The SS had greater sweetness than the other burgers. Both SL and SS had significantly less animalic odor, meaty flavor, oiliness, juiciness, and saltiness compared with DB. The physicochemical and sensory characteristics of burgers prepared from DSLM approached those of burgers made of chicken.