MyMedR

Displaying publications 1 - 20 of 35 in total

Abstract:

Sort:

Fulltext The Inhibition of Hepatic and Renal Glucuronidation of p-Nitrophenol and 4-Methylumbelliferone by Oil Palm Empty Fruit Bunch Lignin and Its Main Oxidation Compounds

Salleh NM, Ismail S, Ibrahim MNM

Pharmacogn Mag, 2017 Jan;13(Suppl 1):S102-S114.
PMID: 28479734 DOI: 10.4103/0973-1296.203990

BACKGROUND: In order to develop oil palm empty fruit bunch (EFB) lignin as a nutraceutical and health supplement, the investigation of its potential in interacting with other drugs via inhibition of drug-metabolizing enzymes (DMEs) would ensure product safety.
OBJECTIVE: The study was aimed to investigate the in vitro effect of oil palm EFB lignin and its main oxidation compounds on phase II DME UDP-glucuronosyltransferases (UGTs) in rat liver and kidney microsomes.
MATERIALS AND METHODS: The p-nitrophenol (p-NP) and 4-methylumbelliferone (4-MU) were employed as probe substrates in glucuronidation assays. The effect of soda oil palm EFB lignin on Vmax, Km, CLint, Ki, and mode of inhibition of 4-MU glucuronidation in RLM was also determined.
RESULTS: The inhibitory potency of oil palm EFB lignin for both p-NP and 4-MU glucuronidation in rat liver microsome (RLM) and rat kidneys microsomes (RKM) was found to be in the rank order of soda > kraft > organosolv. However, the inhibitory potency of its main oxidation compounds were in the rank order of vanillin > syringaldehyde > p-hydroxybenzaldehyde. Soda oil palm EFB lignin exhibited mixed-type inhibition against 4-MU glucuronidation in RLM, showing the change in apparent Vmax and with only a minor effect on Km compared with control.
CONCLUSIONS: The findings showed that effect of oil palm EFB lignin on both p-NP and 4-MU glucuronidation in RLM and RKM was enhanced by the presence of vanillin as well as flavonoids. Kinetic study showed that soda oil palm EFB lignin exhibited strong inhibition on UGT activity in RLM with mixed-type inhibition mode.
SUMMARY: The inhibitory potential of oil palm EFB lignin extracts for p-NP and 4-MU glucuronidation in RLM and RKM can be listed in the following rank order: soda > kraft > organosolvThe inhibitory potential of oil palm EFB lignin main oxidation compounds for p-NP and 4-MU glucuronidation in RLM and RKM can be listed in the following rank order: vanillin > syringaldehyde > p-hydroxybenzaldehydeResults suggested that the effect of oil palm EFB lignin on p-NP and 4-MU glucuronidation activity in both RLM and RKM was enhanced by the presence of vanillin as well as total flavonoid contentResults also suggested that oil palm EFB lignin may inhibit glucuronidation of substrate by UGT enzymes, especially UGT1A6, particularly in rat liver Abbreviations used:p-NP: p-Nitrophenol, 4-MU: 4-Methylumbelliferone, EFB: Empty fruit bunch, DME: Drug-metabolizing enzymes, UGT: UDPglucuronosyltransferase, Vmax: Maximal reaction velocity, Km: Michaelis-Menten constant, CLint: Intrinsic clearance, Ki: Dissociation constant of an inhibitor enzyme complex, 4-MUG: 4-Methylumbelliferone glucuronide, DMSO: Dimethyl sulfoxide, IC50: Half maximal inhibitory concentration, p-NPG: p-Nitrophenol glucuronide, RKM: Rat kidneys microsomes, RLM: Rat liver microsome, UDPGA: UDPglucuronic acid, TCA: trichloroacetic acid, MPA: mycophenolic acid.
Fulltext Zamzam water: influence of containers on ionic concentration and in-vitro cytotoxic effects on U87 cell line

Nasir Mohamad, Shariff Halim, Mohd Ekhwan Toriman, Nor Hidayah Abu Bakar, Ahmad Zubaidi A. Latif

Malaysian Journal of Applied Sciences, 2018;1(1):68-72.
MyJurnal

Zamzam is holy water believed by Muslim to have remedial power for all kinds of diseases. It contains
many electrolytes and the concentration of the electrolytes may be affected by the types of container
used for its storage. This study was carried out to determine the difference in ions concentration of
Zamzam water stored in plastic and glass containers, and to determine cytotoxicity effects of Zamzam
water against U-87 cell line (human primary glioblastoma cell line). Ion Chromatography (IC) was used
to analyze the concentration. The analyzed anions in the Zamzam water include bromide, chloride,
phosphate, nitrite, nitrate, sulfate and fluoride whereas the cations were ammonium, lithium, potassium,
sodium, calcium and magnesium. Subsequently, MTT assay was used to determine the cytotoxicity of
Zamzam water on U-87 cell line. This study reveals that Zamzam water anions and cations
concentration was not statistically significant neither in plastic nor glass container. In addition, the
Zamzam water did not cause any toxicity on the U87 cell line. We postulate that types of container do
not have much influence on the ion concentration of Zamzam water and it is non-toxic on U87 cell line.
Fulltext In-vitro study: camp overshoot caused by chronic morphine alleviated by the synergistic combination of zamzam water and methadone in human primary glioblastoma cell line (u-87 mg).

Shariff Halim, Ridzuan PM, Nasir Mohamad, Nur Husna Zakaria, Nur Atikah Muhammad

IIUM Medical Journal Malaysia, 2019;18(2):47-52.
MyJurnal

Zamzam water is blessed water originated from Mecca and is believed by Muslims to have the ability to cure illness. This ability to cure illness is due to the fact that zamzam water has higher concentration of minerals especially sodium, calcium and magnesium which play a vital role. Sodium is reported to be involved in the regulation of the Mu-Opioid Receptor, which indirectly leads to the production of cAMP. Hence, this current study was carried out to investigate the synergistic effects of zamzam water and methadone combination on cAMP levels in human primary glioblastoma cell line (U-87 MG) after chronic morphine administration. Materials and Methods:The time course and concentration of morphine on U-87 MG cell line was determined. The U-87 MG cell line was incubated with morphine (25 μL/mL) for 24h, to make the cell dependent on morphine and later treated with different combinations of 3.2 mL of zamzam water and methadone (5, 10, 25 μL/mL). The levels of cAMP was determined using the enzyme-linked immunosorbent assay kit. Results:The result revealed that 3.2 mL of zamzam water incubated with 10 μl/mL of methadone significantly prevented the overshoot production of cAMP level (p
Fulltext Synthesis of molecularly imprinted polymer for removal of Congo red

Shafqat SR, Bhawani SA, Bakhtiar S, Ibrahim MNM

BMC Chem, 2020 Dec;14(1):27.
PMID: 32266334 DOI: 10.1186/s13065-020-00680-8

Congo red (CR) is an anionic azo dye widely used in many industries including pharmaceutical, textile, food and paint industries. The disposal of huge amount of CR into the various streams of water has posed a great threat to both human and aquatic life. Therefore, it has become an important aspect of industries to remove CR from different water sources. Molecular imprinting technology is a very slective method to remove various target pollutant from environment. In this study a precipitation polymerization was employed for the effective and selective removal of CR from contaminated aqueous media. A series of congo red molecularly imprinted polymers (CR-MIPs) of uniform size and shape was developed by changing the mole ratio of the components. The optimum ratio (0.1:4: 20, template, functional monomer and cross-linking monomer respectively) for CR1-MIP from synthesized polymers was able to rebind about 99.63% of CR at the optimum conditions of adsorption parameters (contact time 210 min, polymer dosage 0.5 g, concentration 20 ppm and pH 7). The synthesized polymers were characterized by various techniques such as Fourier Infra-red spectroscopy (FTIR), scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), energy-dispersive X-ray spectroscopy (EDX), and Brumauer-Emmett-Teller (BET). The polymer particles have successfully removed CR from different aqueous media with an efficiency of about ~ 90%.
Fulltext Advances and Challenges in Developing Efficient Graphene Oxide-Based ZnO Photocatalysts for Dye Photo-Oxidation

Yaqoob AA, Noor NHBM, Serrà A, Ibrahim MNM

Nanomaterials (Basel), 2020 May 12;10(5).
PMID: 32408530 DOI: 10.3390/nano10050932

The efficient remediation of organic dyes from wastewater is increasingly valuable in water treatment technology, largely owing to the tons of hazardous chemicals currently and constantly released into rivers and seas from various industries, including the paper, pharmaceutical, textile, and dye production industries. Using solar energy as an inexhaustible source, photocatalysis ranks among the most promising wastewater treatment techniques for eliminating persistent organic pollutants and new emerging contaminants. In that context, developing efficient photocatalysts using sunlight irradiation and effectively integrating them into reactors, however, pose major challenges in the technologically relevant application of photocatalysts. As a potential solution, graphene oxide (GO)-based zinc oxide (ZnO) nanocomposites may be used together with different components (i.e., ZnO and GO-based materials) to overcome the drawbacks of ZnO photocatalysts. Indeed, mounting evidence suggests that using GO-based ZnO nanocomposites can promote light absorption, charge separation, charge transportation, and photo-oxidation of dyes. Despite such advances, viable, low-cost GO-based ZnO nanocomposite photocatalysts with sufficient efficiency, stability, and photostability remain to be developed, especially ones that can be integrated into photocatalytic reactors. This article offers a concise overview of state-of-the-art GO-based ZnO nanocomposites and the principal challenges in developing them.
Application of rotten rice as a substrate for bacterial species to generate energy and the removal of toxic metals from wastewater through microbial fuel cells

Daud NNM, Ahmad A, Yaqoob AA, Ibrahim MNM

Environ Sci Pollut Res Int, 2021 Nov;28(44):62816-62827.
PMID: 34215989 DOI: 10.1007/s11356-021-15104-w

Microbial fuel cells (MFCs) are the efficient and sustainable approach for the removal of toxic metals and generate energy concurrently. This article highlighted the effective use of rotten rice as an organic source for bacterial species to generate electricity and decrease the metal concentrations from wastewater. The obtained results were corresponding to the unique MFCs operation where the 510 mV voltage was produced within 14-day operation with 1000 Ω external resistance. The maximum power density and current density were found to be 2.9 mW/m2 and 168.42 mA/m2 with 363.6 Ω internal resistance. Similarly, the maximum metal removal efficiency was found to be 82.2% (Cd), 95.71% (Pb), 96.13% (Cr), 89.50% (Ni), 89.82 (Co), 99.50% (Ag), and 99.88% (Cu). In the biological test, it was found that Lysinibacillus strains, Chryseobacterium strains, Escherichia strains, Bacillus strains are responsible for energy generation and metal removal. Furthermore, a multiparameter optimization revealed that MFCs are the best approach for a natural environment with no special requirements. Lastly, the working mechanism of MFCs and future recommendations are enclosed.
Synthesis of molecularly imprinted polymer by precipitation polymerization for the removal of ametryn

Roland RM, Bhawani SA, Ibrahim MNM

BMC Chem, 2023 Nov 24;17(1):165.
PMID: 38001543 DOI: 10.1186/s13065-023-01084-0

Ametryn (AME) is a triazine herbicide which is mainly used to kill unwanted herbs in crops. Despite its importance in agriculture, the usage of AME also poses a risk to humans and the ecosystem due to its toxicity. Hence, it is important to develop a method for the effective removal of AME from various water sources which is in the form of molecular imprinting polymer (MIP). In this study, MIP of AME was synthesized via precipitation polymerization using AME as the template molecule with three different functional monomers including methacrylic acid (MAA), acrylamide (AAm) and 2-vinylpyridine (2VP). The three different synthesized polymers namely MIP (MAA), MIP (AAm) and MIP (2VP) were characterized using Fourier Infra-red spectroscopy (FTIR) and Field Emission Electron Microscopy (FESEM). Then, the batch binding study was carried out using all three MIPs in which MIP (MAA) attained the highest rebinding efficiency (93.73%) among the synthesized polymers. The Energy-Dispersive X-ray spectroscopy (EDX) analysis, Brunauer-Emmett-Teller (BET) analysis and thermogravimetric analysis (TGA) were also conducted on the selected MIP (MAA). Adsorption studies including initial concentration, pH and polymer dosage were also conducted on MIP (MAA). In this study, the highest adsorption efficiency was attained at the optimum condition of 6 ppm of AME solution at pH 7 with 0.1 g of MIP (MAA). MIP (MAA) was successfully applied to remove AME from spiked distilled water, tap water and river water samples with removal efficiencies of 95.01%, 90.24% and 88.37%, respectively.
Degradation of resorcinol and oxidation of pineapple waste to improve the energy potential through microbial fuel cells

Alshammari MB, Ahmad A, Ibrahim MNM, Rosli NFB

Environ Sci Pollut Res Int, 2025 Mar;32(15):9926-9944.
PMID: 40163195 DOI: 10.1007/s11356-025-36300-y

Microbial fuel cells (MFCs) offer a promising approach to remediate organic pollutants while generating energy. Despite significant advancements, generating electrons remains a major challenge for MFCs. This study addresses the electron production challenges in MFCs using pineapple waste as an organic substrate and resorcinol as a pollutant and carbon source. At a constant 1000 Ω external resistance, the maximum power density (PD) achieved was 2.69 mW/m2. Electrochemical studies, including cyclic voltammetry (CV), indicated efficient oxidation and reduction of the substrate, with a specific capacitance of 1.36 × 10⁻⁷ F/g, suggesting gradual biofilm formation. The electrochemical impedance spectroscopy (EIS) findings confirmed efficient electron transport and resorcinol biodegradation reached 84.66%. Bacterial identification revealed that Proteus vulgaris, Hafnia alvei, and Yersinia enterocolitica significantly contributed to resorcinol degradation and energy generation. Optimal MFC operation was observed at pH 7 and temperatures of 25-30 °C. Overall, pineapple substrates, with their polysaccharide composition, maintained stability for 40 days. The study concludes by highlighting future challenges and potential improvements.
Fulltext Cytotoxicity and antifungal properties of hydroxychavicol against trichophyton rubrum

Ridzuan, P.M., Nasir Mohamad, Salwani Ismail, Nor Iza A. Rahman, Hairul Aini H., Zunariah, B., et al.

International Medical Journal Malaysia, 2018;17(1):31-36.
MyJurnal

Hydroxychavicol (HC) is a phenolic compound of betel leaf (Piper betle). It has been reported to have antifungal properties against dermatophytes including T. rubrum. The aim of this study was to identify the effects of the HC against T. rubrum. Broth dilution method was used to determine the minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) of the HC. Microscopic study of the treated fungus was done by transmission electron microscope (TEM). Cytotoxicity study using pre-adipocyte (3T3-L1) cell line was performed by means of MTT cell proliferation assay. The MIC and MFC results of the HC were both 0.49 µg/ml. Microscopic study revealed the destruction of the fungal cell wall and organelles. Cytotoxicity study showed HC to be non-toxic to the tested human cell line. In conclusion, HC may potentially be used as an alternative therapeutic agent against T. rubrum infections.
Rhamnolipid produced by Pseudomonas aeruginosa USM-AR2 facilitates crude oil distillation

Asshifa Md Noh N, Al-Ashraf Abdullah A, Nasir Mohamad Ibrahim M, Ramli Mohd Yahya A

J Gen Appl Microbiol, 2012;58(2):153-61.
PMID: 22688247

A biosurfactant-producing and hydrocarbon-utilizing bacterium, Pseudomonas aeruginosa USM-AR2, was used to assist conventional distillation. Batch cultivation in a bioreactor gave a biomass of 9.4 g L(-1) and rhamnolipid concentration of 2.4 g L(-1) achieved after 72 h. Biosurfactant activity (rhamnolipid) was detected by the orcinol assay, emulsification index and drop collapse test. Pretreatment of crude oil TK-1 and AG-2 with a culture of P. aeruginosa USM-AR2 that contains rhamnolipid was proven to facilitate the distillation process by reducing the duration without reducing the quality of petroleum distillate. It showed a potential in reducing the duration of the distillation process, with at least 2- to 3-fold decreases in distillation time. This is supported by GC-MS analysis of the distillate where there was no difference between compounds detected in distillate obtained from treated or untreated crude oil. Calorimetric tests showed the calorie value of the distillate remained the same with or without treatment. These two factors confirmed that the quality of the distillate was not compromised and the incubation process by the microbial culture did not over-degrade the oil. The rhamnolipid produced by this culture was the main factor that enhanced the distillation performance, which is related to the emulsification of hydrocarbon chains in the crude oil. This biotreatment may play an important role to improve the existing conventional refinery and distillation process. Reducing the distillation times by pretreating the crude oil with a natural biosynthetic product translates to energy and cost savings in producing petroleum products.
Fulltext Ultra-morphological changes of Trichophyton rubrum treated with hydroxychavicol

Ridzuan, P.M., Nasir Mohamad, Salwani Ismail, Nor Iza A. Rahman, Sanusi, N.A., Rabiatul Adawiyah Umar, et al.

International Medical Journal Malaysia, 2017;16(2):65-71.
MyJurnal

Trichophyton rubrum is a common pathogenic fungal species that is responsible for causing infection on
human skin, hair and nail. The antifungal-resistant strains complicate the treatment regime.
Hydroxychavicol (HC) is one of the main compounds from Piper betel leaf that have antifungal potential and
its mechanism of action has not been studied yet. The objective of this preliminary study to determine the
antifungal properties of HC against T. rubrum using transmission electron microscope (TEM) on gross and
ultrastructure of T. rubrum hypha. T. rubrum was treated with HC and miconazole (MI) at concentrations of
1.25, 2.5, 5 and 10 mg/mL for 1, 3, 5 and 7 days continuously. Generally, fungi structures became more
severely damaged at increasing treatment duration. Microscopically, the fungi’s cell wall treated with HC
showed a rough surface, shrinkage and demolition similar to the MI treated group. The fungi organelles were
also demolished and disorganized. This study revealed that HC has the ability to inhibit T. rubrum growth
and has potential to be an antifungal agent for skin infections.
Modification of oil palm fronds lignin by incorporation of m-cresol for improving structural and antioxidant properties

Sa'don NA, Rahim AA, Ibrahim MNM, Brosse N, Hussin MH

Int J Biol Macromol, 2017 Nov;104(Pt A):251-260.
PMID: 28602987 DOI: 10.1016/j.ijbiomac.2017.06.038

Lignin extracted from oil palm fronds (OPF) underwent chemical modification by incorporating m-cresol into the lignin matrix. This study reports on the physicochemical properties and antioxidant activity of unmodified autohydrolyzed ethanol organosolv lignin (AH EOL) and the modified autohydrolyzed ethanol organosolv lignin (AHC EOL). The lignin samples were analyzed by FTIR, 1H and 13C NMR spectroscopy, 2D NMR: HSQC spectroscopy, CHN analysis, molecular weight distribution analysis; GPC and thermal analysis; DSC and TGA. The lignin modification has reduced the hydrophobicity of its complex structure by providing better quality lignin with smaller fragments and higher solubility rate in water (DAHCEOL: 42%>DAHEOL: 25%). It was revealed that the modification of lignin has improved their structural and antioxidant properties, thus venture their possible applications.
Development and characterization novel bio-adhesive for wood using kenaf core (Hibiscus cannabinus) lignin and glyoxal

Hazwan Hussin M, Aziz AA, Iqbal A, Ibrahim MNM, Latif NHA

Int J Biol Macromol, 2019 Feb 01;122:713-722.
PMID: 30399384 DOI: 10.1016/j.ijbiomac.2018.11.009

The recent study focused on lignin-phenol-glyoxal (LPG) as an alternative way to replace toxic formaldehyde used in commercially available wood adhesives. The concern of the uses of carcinogenic formaldehyde in wood adhesive industry has become major problem over human health, environmental and economy issues. In this study, lignin isolated from Kenaf (Hibiscus cannabinus) via soda and Kraft pulping were modified into SLPG (soda lignin-phenol-glyoxal) and KLPG (Kraft lignin-phenol-glyoxal) adhesives and were compared to phenol-formaldehyde (PF). Complementary analyses such as Fourier Transform Infrared (FTIR) spectroscopy, 1H and 13C Nuclear Magnetic Resonance (NMR) spectroscopy, thermal stability; Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC) were utilized to characterize all isolated lignin samples. The physical properties of the resins were further characterized in term of viscosity, gel time and total solid content. It was found that soda lignin comprised higher phenolic OH content and greater molecular weight compared to Kraft lignin. Various molar ratio of adhesives were applied on plywood and were mechanically tested. The 30% (w/w) SLPG has shown to have higher tensile strength and internal bonding stress at 72.08 MPa and 53.83 N mm-2 respectively to that of PF.
Fulltext Synthesis of lignin based composites of TiO2 for potential application as radical scavengers in sunscreen formulation

Ibrahim MNM, Iqbal A, Shen CC, Bhawani SA, Adam F

BMC Chem, 2019 Dec;13(1):17.
PMID: 31384766 DOI: 10.1186/s13065-019-0537-3

Titanium dioxide (TiO2) is added in sunscreens due to its ability to absorb ultraviolet (UV) light. However, upon irradiation of UV light, reactive oxygen species particularly hydroxyl radical which can damage human skin will be generated. In this study, lignin/TiO2 composites were employed to quench the hydroxyl radicals generated by the TiO2. The lignin was extracted from oil palm empty fruit bunch (OPEFB) via kraft and soda pulping processes. The kraft lignin composite was labelled as KL/TiO2 whereas the soda lignin composite was labelled as SL/TiO2. The lignins and the composites were characterized by FTIR, UV spectroscopy, 13C NMR, SEM, EDX, and XRD. The relative hydroxyl radical production of composites and TiO2 were compared through photo-oxidation of coumarin to 7-hydroxycoumarin as a test medium. The effect of types and amounts of lignin used were studied. The KL/TiO2 composite showed the least radical production due to higher phenolic hydroxyl content of kraft lignin. The activity of the hydroxyl radicals will be quenched when it abstract hydrogen atoms from the phenolic hydroxyl groups.
Bioinspired 2D carbon sheets decorated with MnFe2O4 nanoparticles for preconcentration of inorganic arsenic, and its determination by ICP-OES

Ahmad H, Haseen U, Umar K, Ansari MS, Ibrahim MNM

Mikrochim Acta, 2019 08 27;186(9):649.
PMID: 31456042 DOI: 10.1007/s00604-019-3753-6

The authors describe a method for solvent-free mechano-chemical synthesis of a bioinspired sorbent. A 2D ultra-thin carbon sheet similar to graphene oxide was prepared using a natural waste (onion sheet). The formation of 2D carbon sheets was confirmed by Raman spectroscopy, X-ray photoelectron spectroscopy and ATR-IR. The surface morphology was characterized by field emission scanning electron microscopy and high-resolution tunneling electron microscopy. The carbon sheets were decorated with crystalline MnFe2O4 nanoparticles by solid-state reaction at room temperature. The presence of magnetic particles in the final product was confirmed by vibrating sample magnetometry and electron microscopy. The synergistic effect of carbon sheets and MnFe2O4 led to an enhanced sorption of arsenic species compared to bare carbon sheets or to MnFe2O4 nanoparticles. A column was prepared for the simultaneous preconcentration and determination of trace levels of As(III) and As(V) from water samples. The preconcentration factors are between 900 and 833 for As(III) and As(V) species, respectively. The linearity of the calibration plot ranges from 0.4-10 ng mL-1. The detection limits (at 3σ) for both As(III) and As(V) are 30 pg mL-1. The Student's t values for the analysis of spiked samples are lower than the critical Student's t values at a 95% confidence level. The recoveries from spiked water samples range between 99 and 102.8%. Graphical abstract Schematic representation of the preparation of carbon sheets similar to graphene oxide from onion sheaths after pyrolysis at 800 °C. The prepared carbon sheet-MnFe2O4 composite shows excellent arsenic sorption and preconcentration down to the pg mL-1 concentration.
Fulltext Recent Advances in Anodes for Microbial Fuel Cells: An Overview

Yaqoob AA, Ibrahim MNM, Rafatullah M, Chua YS, Ahmad A, Umar K

Materials (Basel), 2020 May 01;13(9).
PMID: 32369902 DOI: 10.3390/ma13092078

The recycling and treatment of wastewater using microbial fuel cells (MFCs) has been attracting significant attention as a way to control energy crises and water pollution simultaneously. Despite all efforts, MFCs are unable to produce high energy or efficiently treat pollutants due to several issues, one being the anode's material. The anode is one of the most important parts of an MFC. Recently, different types of anode materials have been developed to improve the removal rate of pollutants and the efficiency of energy production. In MFCs, carbon-based materials have been employed as the most commonly preferred anode material. An extensive range of potentials are presently available for use in the fabrication of anode materials and can considerably minimize the current challenges, such as the need for high quality materials and their costs. The fabrication of an anode using biomass waste is an ideal approach to address the present issues and increase the working efficiency of MFCs. Furthermore, the current challenges and future perspectives of anode materials are briefly discussed.
Bioelectricity production and xylene biodegradation through double chamber benthic microbial fuel cells fed with sugarcane waste as a substrate

Umar MF, Rafatullah M, Abbas SZ, Ibrahim MNM, Ismail N

J Hazard Mater, 2021 10 05;419:126469.
PMID: 34192640 DOI: 10.1016/j.jhazmat.2021.126469

Xylene, a recalcitrant compound present in wastewater from activities of petrochemical and chemical industries causes chronic problems for living organisms and the environment. Xylene contaminated wastewater may be biodegraded through a benthic microbial fuel cell (BMFC) as seen in this study. Xylene was oxidized into intermediate 3-methyl benzoic acid and entirely converted into non-toxic carbon dioxide. The highest voltage of the BMFC reactor was generated at 410 mV between 23 and 90 days when cell potential was 1 kΩ. The reactor achieved a maximum power density of about 63 mW/m2, and a current of 0.4 mA which was optimized from variable resistance (20 Ω - 1 kΩ). However, the maximum biodegradation efficiency of the BMFC was at 87.8%. The cyclic voltammetry curve helped to determine that the specific capacitance was 0.124 F/g after 30 days of the BMFC operation. Furthermore, the fitting equivalent circuit was observed with the help of Nyquist plot for calculating overall internal resistance of 65.82 Ω on 30th day and 124.5 Ω on 80th day. Staphylococcus edaphicus and Staphylococcus sparophiticus were identified by 16S rRNA sequencing as the dominant species in the control and BMFC electrode, presumably associated with xylene biodegradation.
Local fruit wastes driven benthic microbial fuel cell: a sustainable approach to toxic metal removal and bioelectricity generation

Yaqoob AA, Guerrero-Barajas C, Ibrahim MNM, Umar K, Yaakop AS

Environ Sci Pollut Res Int, 2022 May;29(22):32913-32928.
PMID: 35020140 DOI: 10.1007/s11356-021-17444-z

The present work focused on the utilization of three local wastes, i.e., rambutan (Nephelium lappaceum), langsat (Lansium parasiticum), and mango (Mangifera indica) wastes, as organic substrates in a benthic microbial fuel cell (BMFC) to reduce the cadmium and lead concentrations from synthetic water. Out of the three wastes, the mango waste promoted a maximum current density (87.71 mA/m2) along with 78% and 80% removal efficiencies for Cd2+ and Pb2+, respectively. The bacterial identification proved that Klebsiella pneumoniae, Enterobacter, and Citrobacter were responsible for metal removal and energy generation. In the present work, the BMFC mechanism, current challenges, and future recommendations are also enclosed.
The use of date palm as a potential adsorbent for wastewater treatment: a review

Ahmad T, Danish M, Rafatullah M, Ghazali A, Sulaiman O, Hashim R, et al.

Environ Sci Pollut Res Int, 2012 Jun;19(5):1464-84.
PMID: 22207239 DOI: 10.1007/s11356-011-0709-8

BACKGROUND: In tropical countries, the palm tree is one of the most abundant and important trees. Date palm is a principal fruit grown in many regions of the world. It is abundant, locally available and effective material that could be used as an adsorbent for the removal of different pollutants from aqueous solution.
REVIEW: This article presents a review on the role of date palm as adsorbents in the removal of unwanted materials such as acid and basic dyes, heavy metals, and phenolic compounds. Many studies on adsorption properties of various low cost adsorbent, such as agricultural waste and activated carbons based on agricultural waste have been reported in recent years.
CONCLUSION: Studies have shown that date palm-based adsorbents are the most promising adsorbents for removing unwanted materials. No previous review is available where researchers can get an overview of the adsorption capacities of date palm-based adsorbent used for the adsorption of different pollutants. This review provides the recent literature demonstrating the usefulness of date palm biomass-based adsorbents in the adsorption of various pollutants.
Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and characterisation of its blend with oil palm empty fruit bunch fibers

Salim YS, Abdullah AA, Nasri CS, Ibrahim MN

Bioresour Technol, 2011 Feb;102(3):3626-8.
PMID: 21115240 DOI: 10.1016/j.biortech.2010.11.020

Poly(3-hydroxybutyrate-co-38 mol%-3-hydroxyvalerate) [P(3HB-co-38mol%-3HV)] was produced by Cupriavidus sp. USMAA2-4 in the presence of oleic acid and 1-pentanol. Due to enormous production of empty fruit bunch (EFB) in the oil palm plantation and high production cost of P(3HB-co-3HV), oil palm EFB fibers were used for biocomposites preparation. In this study, maleic anhydride (MA) and benzoyl peroxide (DBPO) were used to improve the miscibility between P(3HB-co-3HV) and EFB fibers. Introduction of MA into P(3HB-co-3HV) backbone reduced the molecular weight and improved the thermal stability of P(3HB-co-3HV). Thermal stability of P(3HB-co-3HV)/EFB composites was shown to be comparable to that of commercial packaging product. Composites with 35% EFB fibers content have the highest tensile strength compared to 30% and 40%. P(3HB-co-3HV)/EFB blends showed less chemicals leached compared to commercial packaging.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links