Displaying all 18 publications

Abstract:
Sort:
  1. Abdul,Ghani,S,H,, Mohd,Ali,N,D,
    Compendium of Oral Science, 2020;7(1):44-50.
    MyJurnal
    Abstract
    Introduction: Orthodontic treatment even though managed and properly controlled , on some remote occasion
    may lead to presence of unwanted movement. Anterior open bite is one such example of an iatrogenic
    outcome. This article describes the management of an iatrogenic anterior open bite case that occurred in active
    orthodontic treatment in the early stage of leveling and aligning. A few modalities had been employed to
    manage the open bite through some artistic bends followed by the use of modified low transpalatal arch with
    extended looped arms with loops as well as orthodontic mini implants for distalisation and some intrusion
    mechanics. This case report is aimed to share authors’ anecdotal experience on overcoming the open bite.
    Matched MeSH terms: Malocclusion, Angle Class II
  2. Hashim HA
    Aust Orthod J, 1991 Oct;12(2):100-4.
    PMID: 1843791
    The effects of functional appliance treatment have been reported in numerous studies in the literature with great variability in the findings. It is generally agreed that they can be used successfully to treat Class II malocclusions in growing and cooperative patients. However, there is a lack of consensus regarding the relative orthodontic and orthopedic correction obtained by functional appliances in Class II correction. Lateral cephalometric radiographs from a sample (n = 36) of patients who had undergone a phase of treatment with activator appliances were measured and analysed for changes using a modified version of the method described by Johnston (Hashim and Godfrey 1990). In this method, the treatment changes were broken down into: tooth movement relative to basal bone; and the translatory growth of the jaws, both with respect to the cranial base and to each other. The results show that the treatment effects were mainly dentoalveolar. There was a slight orthopedic effect on the maxilla, but no significant mandibular growth was observed, above that which can be expected from normal growth.
    Matched MeSH terms: Malocclusion, Angle Class II/physiopathology*; Malocclusion, Angle Class II/therapy
  3. Banabilh SM, Rajion ZA, Samsudin AR, Singh GD
    Int J Orthod Milwaukee, 2006;17(4):17-20.
    PMID: 17256439
    Facial soft tissues are a major determinant of treatment choice. When Class I and Class II malocclusions were compared using finite-element analysis, morphologic differences were localized and quantified. This study highlights the importance of determining the timing, magnitude and direction offacial growth prior to treatment to achieve stable results.
    Matched MeSH terms: Malocclusion, Angle Class II/pathology; Malocclusion, Angle Class II/therapy
  4. Noraini Abu Bakar, Khairani Idah Mokhtar, Azrul Fazwan Kharuddin
    MyJurnal
    PAX9 (Paired box 9) gene is one of the genes which play significant role during
    craniofacial development. Single nucleotide polymorphism (SNP) in PAX9 has been associated with
    Class II/Division 2 malocclusion (with or without hypodontia). However, the relationship between
    PAX9 SNP marker (rs8004560) with mandibular prognathism (MP) has not been analysed, at least in
    our local population. This study aimed to detect the presence of PAX9 (rs8004560) SNP in Class III
    malocclusion patients (with MP) in the local population. (Copied from article).
    Matched MeSH terms: Malocclusion, Angle Class II; Malocclusion, Angle Class III
  5. Banabilh SM, Rajion ZA, Samsudin R, Singh GD
    Aust Orthod J, 2006 Nov;22(2):99-103.
    PMID: 17203572
    To quantify and localise differences in Class I and Class II dental arches in Malay schoolchildren.
    Matched MeSH terms: Malocclusion, Angle Class II/pathology*
  6. Burezq H, Bang RL, George A, Mukhtar A
    J Craniofac Surg, 2007 Jul;18(4):971-4.
    PMID: 17667698
    Prominent premaxilla is one of the problems encountered when dealing with bilateral complete cleft lip and palate patients. Secondary alveolar bone grafting with these patients would achieve filling of the osseous defect, supports the alar base, eliminate the oro-nasal fistula and enhance the maxillary instability. This article describes the management of a bilateral cleft lip and palate patient with an extremely protruding premaxilla done in one stage surgery. To our knowledge, this is the first report of such degree of severity in the English literature.
    Matched MeSH terms: Malocclusion, Angle Class II/surgery
  7. Muhammadazril Mohd Saad, Nur Amin Abd Rahman, Khairani Idah Mokhtar, Noraini Abu Bakar, Azrul Fazwan Kharuddin, Wan Rohani Wan Taib
    MyJurnal
    Polymorphism in PAX9 (rs8004560), a gene responsible for craniofacial and tooth development, is often associated with Class II/Div2 malocclusion. This study aimed to detect the presence of PAX9 SNP (rs8004560) and to determine its genotype and allele distribution in Class II skeletal base malocclusion, contributed by retrognathic mandible, in the local Malaysian population. The association of PAX9 SNP (rs8004560) with Class II skeletal base malocclusion was also determined. A case control study was performed on 30 samples; 15 from Class II skeletal base malocclusion, and 15 from Class I skeletal base subject as control. Cephalometric measurements were performed prior to saliva samples collection. Genomic DNA was extracted from unstimulated saliva of all subjects, and the DNA was amplified using specific primers for marker rs8004560, followed by genotyping by sequencing. SHEsis online software was used to analyse Hardy-Weinberg Equilibrium (HWE) for cases and controls. Allelic and genotypic frequencies were compared between cases and controls. Significant difference in allele frequency was observed within the group whereby G allele was over-represented in the analysed population (p0.05). Although no genetic association between PAX9 SNP (rs8004560) with Class II skeletal base malocclusion was observed, significant difference in allele frequency observed might provide some indication in the involvement of PAX9 polymorphism in Class II skeletal base malocclusion contributed by retrognathic mandible. Further research utilising larger sample size will be required in order to determine the role of PAX9 gene in the aetiology of Class II skeletal base malocclusion observed in the local Malaysian population.
    Matched MeSH terms: Malocclusion, Angle Class II
  8. Rohaya Megat Abdul Wahab, Hartini Idris, Habibah Yacob, Shahrul Hisham Zainal Ariffin
    Sains Malaysiana, 2013;42(1):25-32.
    The aims of this study were to assess the skeletal pattern and the malocclusion of Kadazan Dusun ethnic patients who seek for orthodontic treatment. Cephalometric radiographs (248) and 345 study models were collected from four orthodontic clinics in Sabah. The cephalometric mean values (SNA, SNB, ANB, MMA, SNMxP, UIMxP, LIMnP and ALFH) were measured and the study models were analysed for overjet, overbite, incisor and molar relationships. Some morphological or occlusal features such as shovel shape, Talon cusp, peg shape teeth, midline diastema, canine displacement and supernumerary tooth were also noted. The frequency and correlation of cephalometric mean values and prevalence of malocclusion were analysed using SPSS 18. Class I Skeletal pattern was the most common (48%) followed by Class II (33%) and Class III (18%). There was a strong correlation between SNA and SNB values (>0.70). Class II/1 incisor relationship has the highest frequency (41%) followed by Class III (32%), Class I (21%) and Class II/2 (6%). Class II Molar relationship of both right and left showed highest frequency (38%) followed by Class I (33%) and Class III (30%). Increased of overjet (44%) and reduced overbite (41%) and shovel-shaped incisor were the most common occlusal and dental features. The Kadazan Dusun patients who seek for orthodontic treatment in Sabah were mostly presented with Class I Skeletal pattern with high prevalence in Class II/1 incisor relationship, Class II molar relationship, increased overjet and reduced overbite. The orthodontic treatment pertaining to this ethnicity should be in line with the findings that will benefit patient specifically based on their common presented features.
    Matched MeSH terms: Malocclusion, Angle Class II
  9. Qamruddin I, Alam MK, Shahid F, Tanveer S, Mukhtiar M, Asim Z
    J Coll Physicians Surg Pak, 2016 May;26(5):390-3.
    PMID: 27225144 DOI: 2321
    OBJECTIVE: To determine and compare the cephalometric values among Pakistani males and females using commonly used sagittal skeletal measurements (ANB, Wits appraisal, Beta-angle) and newly developed cephalometric analyses (Yen-angle and W-angle).

    STUDY DESIGN: Observational, cross-sectional study.

    PLACE AND DURATION OF STUDY: Orthodontic Department of Baqai Medical University, Karachi, Pakistan, from August to October 2013.

    METHODOLOGY: Atotal of 209 pre-treatment lateral cephalometric radiographs of orthodontic patients were selected from departmental records, comprised of 92 males and 117 females. Radiographs were traced for measurements of ANB, Wits appraisal, Beta-angle, W-angle and Yen-angle. Patients were categorized into skeletal classes I, II, and III on the basis of performed measurements, incisor classification, and profile recorded from their records. Descriptive analysis was used to obtain median interquartile range in both the genders and Mann-Whitney U-test was used to observe gender dimorphism.

    RESULTS: Skeletal class II was the most prevalent type of malocclusion. There were no difference in the obtained measurements between males and females except the Wits appraisal and Beta-angle in class II patients, which showed significant difference in values (p < 0.05).

    CONCLUSION: Pakistani population has no significant different difference in the craniofacial morphology of males and females, with the exception of Wits-appraisal and Beta-angle in class II cases.

    Matched MeSH terms: Malocclusion, Angle Class II/epidemiology; Malocclusion, Angle Class III/epidemiology
  10. Alhammadi MS, Halboub E, Fayed MS, Labib A, El-Saaidi C
    Dental Press J Orthod, 2019 1 24;23(6):40.e1-40.e10.
    PMID: 30672991 DOI: 10.1590/2177-6709.23.6.40.e1-10.onl
    OBJECTIVE: Considering that the available studies on prevalence of malocclusions are local or national-based, this study aimed to pool data to determine the distribution of malocclusion traits worldwide in mixed and permanent dentitions.

    METHODS: An electronic search was conducted using PubMed, Embase and Google Scholar search engines, to retrieve data on malocclusion prevalence for both mixed and permanent dentitions, up to December 2016.

    RESULTS: Out of 2,977 retrieved studies, 53 were included. In permanent dentition, the global distributions of Class I, Class II, and Class III malocclusion were 74.7% [31 - 97%], 19.56% [2 - 63%] and 5.93% [1 - 20%], respectively. In mixed dentition, the distributions of these malocclusions were 73% [40 - 96%], 23% [2 - 58%] and 4% [0.7 - 13%]. Regarding vertical malocclusions, the observed deep overbite and open bite were 21.98% and 4.93%, respectively. Posterior crossbite affected 9.39% of the sample. Africans showed the highest prevalence of Class I and open bite in permanent dentition (89% and 8%, respectively), and in mixed dentition (93% and 10%, respectively), while Caucasians showed the highest prevalence of Class II in permanent dentition (23%) and mixed dentition (26%). Class III malocclusion in mixed dentition was highly prevalent among Mongoloids.

    CONCLUSION: Worldwide, in mixed and permanent dentitions, Angle Class I malocclusion is more prevalent than Class II, specifically among Africans; the least prevalent was Class III, although higher among Mongoloids in mixed dentition. In vertical dimension, open bite was highest among Mongoloids in mixed dentition. Posterior crossbite was more prevalent in permanent dentition in Europe.

    Matched MeSH terms: Malocclusion, Angle Class II/epidemiology; Malocclusion, Angle Class III/epidemiology
  11. Qamruddin I, Alam MK, Mahroof V, Karim M, Fida M, Khamis MF, et al.
    Pain Res Manag, 2021;2021:6624723.
    PMID: 34035871 DOI: 10.1155/2021/6624723
    Objective: Low-intensity pulsed ultrasound (LIPUS) is a noninvasive modality to stimulate bone remodeling (BR) and the healing of hard and soft tissues. This research evaluates the biostimulatory effect of LIPUS on the rate of orthodontic tooth movement (OTM) and associated pain, when applied at 3-week intervals.

    Methods: Twenty-two patients (11 males and 11 females; mean age 19.18 ± 2.00 years) having Angle's Class II division 1 malocclusion needing bilateral extractions of maxillary first bicuspids were recruited for this split-mouth randomized clinical trial. After the initial stage of alignment and leveling with contemporary edgewise MBT (McLaughlin-Bennett-Trevisi) prescription brackets (Ortho Organizers, Carlsbad, Calif) of 22 mil, followed by extractions of premolars bilaterally, 6 mm nickel-titanium spring was used to retract the canines separately by applying 150 g force on 0.019 × 0.025-in stainless steel working archwires. LIPUS (1.1 MHz frequency and 30 mW/cm2 intensity output) was applied for 20 minutes extraorally and reapplied after 3 weeks for 2 more successive visits over the root of maxillary canine on the experimental side whereas the other side was placebo. A numerical rating scale- (NRS-) based questionnaire was given to the patients on each visit to record their weekly pain experience. Impressions were also made at each visit before the application of LIPUS (T1, T2, and T3). Models were scanned with a CAD/CAM scanner (Planmeca, Helsinki, Finland). Mann-Whitney U test was applied for comparison of canine movement and pain intensity between both the groups.

    Results: No significant difference in the rate of canine movement was found among the experimental (0.90 mm ± 0.33 mm) and placebo groups (0.81 mm ± 0.32 mm). There was no difference in pain reduction between experimental and placebo groups (p > 0.05).

    Conclusion: Single-dose application of LIPUS at 3-week intervals is ineffective in stimulating the OTM and reducing associated treatment pain.

    Matched MeSH terms: Malocclusion, Angle Class II/therapy*
  12. Chew MT
    Angle Orthod, 2006 Sep;76(5):806-9.
    PMID: 17029514
    The aim of this retrospective study is to investigate the spectrum and management of dentofacial deformities in a multiethnic Asian community.
    Matched MeSH terms: Malocclusion, Angle Class II/ethnology; Malocclusion, Angle Class II/surgery; Malocclusion, Angle Class III/ethnology; Malocclusion, Angle Class III/surgery
  13. Wahab RM, Idris H, Yacob H, Ariffin SH
    Eur J Orthod, 2012 Apr;34(2):176-81.
    PMID: 21478298 DOI: 10.1093/ejo/cjq179
    This prospective study investigated the difference in clinical efficiency between Damon™ 3 self-ligating brackets (SLB) compared with Mini Diamond conventional ligating brackets (CLBs) during tooth alignment in straightwire fixed appliance therapy. Twenty-nine patients (10 males and 19 females), aged between 14 and 30 years, were randomly divided into two groups: 14 patients received the SLB and 15 received the CLB. Upper arch impressions were taken for pre-treatment records (T(0)). A transpalatal arch was soldered to both maxillary first molar bands prior to extraction of the maxillary first premolars, followed by straightwire fixed appliances (0.022 × 0.028 inch). A 0.014 inch nickel titanium (NiTi) wire was used as the levelling and aligning archwire. Four monthly reviews were undertaken and impressions of the upper arch were taken at each appointment (T(1), T(2), T(3), and T(4)). Displacements of the teeth were determined using Little's irregularity index (LII). Data were analysed using the Mann-Whitney U-test. In the aligning stage, the CLB group showed significantly faster alignment of the teeth compared with the SLB group at the T(1)-T(2) interval (P < 0.05). However, there were no differences at T(2)-T(3), and T(3)-T(4) for either group (P > 0.05). The CLB group showed 98 per cent crowding alleviation compared with 67 per cent for the SLB after 4 months of alignment and levelling. Mini Diamond brackets aligned the teeth faster than Damon™ 3 but only during the first month. There was no difference in efficacy between the two groups in the later 3 weeks. Alleviation of crowding was faster with CLB than with SLB.
    Matched MeSH terms: Malocclusion, Angle Class II/therapy
  14. Toman HA, Nasir A, Hassan R, Hassan R
    Eur J Orthod, 2011 Dec;33(6):700-4.
    PMID: 21282284 DOI: 10.1093/ejo/cjq147
    Thalassaemia is a public health problem in Malaysia. It is known to cause skeletal deformity. The purpose of this study was to compare the skeletal, dentoalveolar, and soft tissue features of Malay transfusion-dependent thalassaemia (TDT) patients with a Malay control group. Lateral cephalometric radiographs of 30 Malay (14 males and 16 females aged 6.4-21.8 years) TDT patients and 60 normal Malays matched for chronological age and gender were analysed and compared using an independent t-test. The TDT group showed a similar sagittal relationship to the control group but with a significantly increased (P < 0.01) mandibular plane inclination. They also showed a significantly shorter (P ≤ 0.001) mandibular body, ramus length, and posterior face height and consequently a smaller ratio of posterior to anterior face height (P < 0.01). The upper and lower lips were significantly procumbent (P < 0.001) in the TDT group together with a significantly smaller nasolabial angle (P < 0.05). Dentoalveolar measurements showed less proclined maxillary teeth in the TDT group compared with the controls (P < 0.05). The cephalometric features of Malay TDT patients were characterized by a mild Class II skeletal pattern, prominent vertical growth direction of the mandible, and protruded upper and lower lips.
    Matched MeSH terms: Malocclusion, Angle Class II/pathology
  15. Banabilh SM, Samsudin AR, Suzina AH, Dinsuhaimi S
    Angle Orthod, 2010 Jan;80(1):37-42.
    PMID: 19852637 DOI: 10.2319/011509-26.1
    To test the null hypothesis that there is no difference in facial profile shape, malocclusion class, or palatal morphology in Malay adults with and without obstructive sleep apnea (OSA).
    Matched MeSH terms: Malocclusion, Angle Class II/complications
  16. Sia S, Shibazaki T, Koga Y, Yoshida N
    Am J Orthod Dentofacial Orthop, 2009 Jan;135(1):36-41.
    PMID: 19121498 DOI: 10.1016/j.ajodo.2007.01.034
    This study was designed to determine the optimum vertical height of the retraction force on the power arm that is required for efficient anterior tooth retraction during space closure with sliding mechanics.
    Matched MeSH terms: Malocclusion, Angle Class II/therapy
  17. Siow KK, Ong ST, Lian CB, Ngeow WC
    J Oral Sci, 2002 Dec;44(3-4):165-71.
    PMID: 12613507
    Thirty-one patients treated at the Faculty of Dentistry, University of Malaya, were assessed for their satisfaction following orthognathic surgery. The female to male ratio was 22:9 with an age range of 17 to 36. Almost all patients (97%) listed appearance as one of their rationales for surgery. More males (78%) than females (59%) wanted functional improvement, while more females (91%) than males (33%) hoped for improvement in self-confidence. All patients reported esthetic improvement while 68% each reported improvement in mastication and self-confidence. Slightly more than half (52%) chose esthetic improvement as the single most important factor resulting in satisfaction. Almost ninety percent of male patients claimed satisfaction with functional improvement, while 68% of those who found satisfaction in improved self-confidence were females. Eighty-seven percent rated their post-surgical changes as being well accepted by their family. The impact of these findings on the success of the surgery and the need to reinforce verbal communication with printed pamphlets are emphasized.
    Matched MeSH terms: Malocclusion, Angle Class II/surgery; Malocclusion, Angle Class III/surgery
  18. Fathinah Hanem Azamzaki, Nurhanis Baharuddin, Tandon, Shobha, Venkiteswaran, Annapurny
    Compendium of Oral Science, 2018;5(1):18-25.
    MyJurnal
    Objectives:To determine the different occlusal characteristics in primary dentition of 3 to 6 year old Malay children and to create a preliminary database for future Malaysian studies as currently none of the studies has been conducted in Malaysian population regarding the occlusal features in primary dentition. Materials and method:The subjects were within the age ranging from 3 – 6 years old attending nurseries and kindergartens located within Sungai Buloh, Selangor. Sixty subjects were screened but only 47 fulfilled the criteria to be included in this study. Intra-oral examination was done to determine the terminal plane, canine relationship, overjet, overbite and primate space in the subjects. Results: Almost two thirds of the subjects (72.34%) presented with straight terminal plane. All but one subject were observed with Class I canine relationship. 61.7% subjects were with an ideal overjet and 53.19% of subjects had an ideal overbite. The mean value for primate space in the maxilla was 2.92mm and 1.60mm in the mandible. There was no significant difference between gender in all the parameters assessed. Conclusion: The results from the study shown that only few of the subjects had a tendency of malocclusion in their permanent dentition. However, a longitudinal study should be done to follow up their occlusal feature in the permanent dentition.
    Matched MeSH terms: Malocclusion, Angle Class II
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links