Displaying publications 1 - 20 of 58 in total

Abstract:
Sort:
  1. Roy S, Ramiah H, Reza AW, Lim CC, Ferrer EM
    PLoS One, 2016;11(7):e0158954.
    PMID: 27391136 DOI: 10.1371/journal.pone.0158954
    Micro-electro mechanical system (MEMS) based oscillators are revolutionizing the timing industry as a cost effective solution, enhanced with more features, superior performance and better reliability. The design of a sustaining amplifier was triggered primarily to replenish MEMS resonator's high motion losses due to the possibility of their 'system-on-chip' integrated circuit solution. The design of a sustaining amplifier observing high gain and adequate phase shift for an electrostatic clamp-clamp (C-C) beam MEMS resonator, involves the use of an 180nm CMOS process with an unloaded Q of 1000 in realizing a fixed frequency oscillator. A net 122dBΩ transimpedance gain with adequate phase shift has ensured 17.22MHz resonant frequency oscillation with a layout area consumption of 0.121 mm2 in the integrated chip solution, the sustaining amplifier draws 6.3mW with a respective phase noise of -84dBc/Hz at 1kHz offset is achieved within a noise floor of -103dBC/Hz. In this work, a comparison is drawn among similar design studies on the basis of a defined figure of merit (FOM). A low phase noise of 1kHz, high figure of merit and the smaller size of the chip has accredited to the design's applicability towards in the implementation of a clock generative integrated circuit. In addition to that, this complete silicon based MEMS oscillator in a monolithic solution has offered a cost effective solution for industrial or biomedical electronic applications.
    Matched MeSH terms: Video Recording*
  2. Idbeaa T, Abdul Samad S, Husain H
    PLoS One, 2016;11(3):e0150732.
    PMID: 26963093 DOI: 10.1371/journal.pone.0150732
    This paper presents a novel secure and robust steganographic technique in the compressed video domain namely embedding-based byte differencing (EBBD). Unlike most of the current video steganographic techniques which take into account only the intra frames for data embedding, the proposed EBBD technique aims to hide information in both intra and inter frames. The information is embedded into a compressed video by simultaneously manipulating the quantized AC coefficients (AC-QTCs) of luminance components of the frames during MPEG-2 encoding process. Later, during the decoding process, the embedded information can be detected and extracted completely. Furthermore, the EBBD basically deals with two security concepts: data encryption and data concealing. Hence, during the embedding process, secret data is encrypted using the simplified data encryption standard (S-DES) algorithm to provide better security to the implemented system. The security of the method lies in selecting candidate AC-QTCs within each non-overlapping 8 × 8 sub-block using a pseudo random key. Basic performance of this steganographic technique verified through experiments on various existing MPEG-2 encoded videos over a wide range of embedded payload rates. Overall, the experimental results verify the excellent performance of the proposed EBBD with a better trade-off in terms of imperceptibility and payload, as compared with previous techniques while at the same time ensuring minimal bitrate increase and negligible degradation of PSNR values.
    Matched MeSH terms: Video Recording/methods*
  3. Siddiqui MF, Reza AW, Kanesan J, Ramiah H
    ScientificWorldJournal, 2014;2014:620868.
    PMID: 25133249 DOI: 10.1155/2014/620868
    A wide interest has been observed to find a low power and area efficient hardware design of discrete cosine transform (DCT) algorithm. This research work proposed a novel Common Subexpression Elimination (CSE) based pipelined architecture for DCT, aimed at reproducing the cost metrics of power and area while maintaining high speed and accuracy in DCT applications. The proposed design combines the techniques of Canonical Signed Digit (CSD) representation and CSE to implement the multiplier-less method for fixed constant multiplication of DCT coefficients. Furthermore, symmetry in the DCT coefficient matrix is used with CSE to further decrease the number of arithmetic operations. This architecture needs a single-port memory to feed the inputs instead of multiport memory, which leads to reduction of the hardware cost and area. From the analysis of experimental results and performance comparisons, it is observed that the proposed scheme uses minimum logic utilizing mere 340 slices and 22 adders. Moreover, this design meets the real time constraints of different video/image coders and peak-signal-to-noise-ratio (PSNR) requirements. Furthermore, the proposed technique has significant advantages over recent well-known methods along with accuracy in terms of power reduction, silicon area usage, and maximum operating frequency by 41%, 15%, and 15%, respectively.
    Matched MeSH terms: Video Recording/methods
  4. Abd Aziz N, Kadar M, Harun D, Mohd Rasdi HF
    Occup Ther Health Care, 2021 Apr;35(2):227-244.
    PMID: 33511894 DOI: 10.1080/07380577.2021.1876967
    This scoping review explores the implementation of video modeling (VM) by occupational therapists during the intervention process for children and adolescents with special needs. Four primary electronic databases were used to conduct the scoping review: PubMed, Scopus, CINAHL, and Proquest (Nursing and Allied Health). Research methodologies by Arksey and O'Malley were used as a framework to perform the review process. From the review, two themes emerged: (1) implementing VM by occupational therapists during the intervention process can successfully improve a client's desired skills; (2) VM can be applied through several types of technologies. The findings support occupational therapists' use of VM during interventions to positively enhance and promote desired skills among children and adolescents with special needs. Also, it can be incorporated into technological devices to suit a client's specific needs.
    Matched MeSH terms: Video Recording/methods*
  5. Tan LK, Wong JH, Ng KH
    AJR Am J Roentgenol, 2006 Mar;186(3):898-901.
    PMID: 16498128
    The purpose of this article was to develop a low-cost method for high-quality remote capturing and recording of multimedia presentations.
    Matched MeSH terms: Video Recording/instrumentation*
  6. Mohd Khairuddin KA, Ahmad K, Ibrahim HM, Yan Y
    J Voice, 2022 Jan;36(1):106-112.
    PMID: 32456835 DOI: 10.1016/j.jvoice.2020.04.027
    Ideally, an analysis method for laryngeal high-speed videoendoscopy (LHSV) based on the glottal area waveforms (GAW) requires images of a complete view of the glottis to ensure findings that are representatives of the vibratory behaviors of the whole vocal folds. However, in practice, the preferred images may not be obtained at all times. Often, the only available images that a clinician has to work with consist of a partial view of the glottis. This study aims to examine the effects of using images of a partial view of the glottis (ie, posterior-middle, anterior-middle, or middle) on the LHSV-based measures (ie, fundamental frequency (F0GAW), frequency perturbation (jitterGAW), amplitude perturbation (shimmerGAW), open quotient (OQGAW), and Nyquist plot). The participants consisted of 9 young normophonic females. The procedures involved LHSV recording of the vibration of the vocal folds. The images of the complete view of the glottis were analyzed to obtain the LHSV-based measures. The same images were used to simulate the images of partial views of the glottis by changing the outline of the region of interest to include only either the posterior-middle, anterior-middle, or middle parts of the glottis. The LHSV-based measures from the images of the partial views were then compared to those with the complete view . The results showed that all LHSV-based measures from the images of the posterior-middle view were similar to those of the complete view. However, only the F0GAW, jitterGAW, and shimmerGAW from the images of the anterior-middle and middle views were similar to those of the complete view. Lower OQGAW and different Nyquist plots than those of the complete view were generated by the images of the anterior-middle and middle views. In conclusion, all LHSV-based measures from the images of the posterior-middle view of the glottis, and only the F0GAW, jitterGAW, and shimmerGAW from the images of the anterior-middle and middle views of the glottis reflect the vibratory behaviors of the whole vocal folds. The same conclusion could not be applied to the OQGAW and Nyquist plots of the images of the anterior-middle and middle views of the glottis. A possible effect of the presence or absence of a posterior glottal gap on the findings warrants further confirmation.
    Matched MeSH terms: Video Recording
  7. Arigbabu OA, Ahmad SM, Adnan WA, Yussof S, Iranmanesh V, Malallah FL
    ScientificWorldJournal, 2014;2014:460973.
    PMID: 25121120 DOI: 10.1155/2014/460973
    Soft biometrics can be used as a prescreening filter, either by using single trait or by combining several traits to aid the performance of recognition systems in an unobtrusive way. In many practical visual surveillance scenarios, facial information becomes difficult to be effectively constructed due to several varying challenges. However, from distance the visual appearance of an object can be efficiently inferred, thereby providing the possibility of estimating body related information. This paper presents an approach for estimating body related soft biometrics; specifically we propose a new approach based on body measurement and artificial neural network for predicting body weight of subjects and incorporate the existing technique on single view metrology for height estimation in videos with low frame rate. Our evaluation on 1120 frame sets of 80 subjects from a newly compiled dataset shows that the mentioned soft biometric information of human subjects can be adequately predicted from set of frames.
    Matched MeSH terms: Video Recording*
  8. Barekatain B, Khezrimotlagh D, Aizaini Maarof M, Ghaeini HR, Salleh S, Quintana AA, et al.
    PLoS One, 2013;8(8):e69844.
    PMID: 23940530 DOI: 10.1371/journal.pone.0069844
    In recent years, Random Network Coding (RNC) has emerged as a promising solution for efficient Peer-to-Peer (P2P) video multicasting over the Internet. This probably refers to this fact that RNC noticeably increases the error resiliency and throughput of the network. However, high transmission overhead arising from sending large coefficients vector as header has been the most important challenge of the RNC. Moreover, due to employing the Gauss-Jordan elimination method, considerable computational complexity can be imposed on peers in decoding the encoded blocks and checking linear dependency among the coefficients vectors. In order to address these challenges, this study introduces MATIN which is a random network coding based framework for efficient P2P video streaming. The MATIN includes a novel coefficients matrix generation method so that there is no linear dependency in the generated coefficients matrix. Using the proposed framework, each peer encapsulates one instead of n coefficients entries into the generated encoded packet which results in very low transmission overhead. It is also possible to obtain the inverted coefficients matrix using a bit number of simple arithmetic operations. In this regard, peers sustain very low computational complexities. As a result, the MATIN permits random network coding to be more efficient in P2P video streaming systems. The results obtained from simulation using OMNET++ show that it substantially outperforms the RNC which uses the Gauss-Jordan elimination method by providing better video quality on peers in terms of the four important performance metrics including video distortion, dependency distortion, End-to-End delay and Initial Startup delay.
    Matched MeSH terms: Video Recording/methods*
  9. Low SC, Tan AH, Lim SY
    Neurology, 2017 01 03;88(1):e9.
    PMID: 28025406 DOI: 10.1212/WNL.0000000000003465
    Matched MeSH terms: Video Recording/methods*
  10. Suriani NS, Hussain A, Zulkifley MA
    Sensors (Basel), 2013 Aug 05;13(8):9966-98.
    PMID: 23921828 DOI: 10.3390/s130809966
    Event recognition is one of the most active research areas in video surveillance fields. Advancement in event recognition systems mainly aims to provide convenience, safety and an efficient lifestyle for humanity. A precise, accurate and robust approach is necessary to enable event recognition systems to respond to sudden changes in various uncontrolled environments, such as the case of an emergency, physical threat and a fire or bomb alert. The performance of sudden event recognition systems depends heavily on the accuracy of low level processing, like detection, recognition, tracking and machine learning algorithms. This survey aims to detect and characterize a sudden event, which is a subset of an abnormal event in several video surveillance applications. This paper discusses the following in detail: (1) the importance of a sudden event over a general anomalous event; (2) frameworks used in sudden event recognition; (3) the requirements and comparative studies of a sudden event recognition system and (4) various decision-making approaches for sudden event recognition. The advantages and drawbacks of using 3D images from multiple cameras for real-time application are also discussed. The paper concludes with suggestions for future research directions in sudden event recognition.
    Matched MeSH terms: Video Recording/methods*
  11. Mohd Khairuddin KA, Ahmad K, Mohd Ibrahim H, Yan Y
    J Voice, 2021 Jul;35(4):636-645.
    PMID: 31864891 DOI: 10.1016/j.jvoice.2019.12.005
    Despite its clear advantages, laryngeal high-speed videoendoscopy (LHSV) has not yet been accepted as a routine imaging tool for the evaluation of vocal fold vibration due to the unavailability of methods to effectively analyze the huge number of images from the LHSV recording. Recently, a promising LHSV-based analysis method has been introduced. The ability of this analysis method in studying the vocal fold vibratory behaviors had been substantially demonstrated. However, some practical aspects of its clinical applications still require further attention. Most fundamental is that the criteria for the measurement input ie, a segment of interest (SOI), which has not been fully defined. Particularly, the length of the SOI and the location along the sample, where it needs to be selected require further confirmation. Meanwhile, the analysis using any options of a well-delineated glottal area demands verification. Without clear criteria for the SOI, it is difficult to demonstrate the relevance of this analysis method in clinical voice assessment. Therefore, the aim of the present study is to establish the criteria for the SOI, which involved the investigations on the length of the SOI and the location along the sample, where it needs to be selected, as well as the use of any options of a well-delineated glottal area for analysis. The participants in the present study consisted of 36 young normophonic females. The methods involved LHSV recording of the images of the vibrating vocal folds. The captured images were then analyzed using the method. The LHSV-based measures from the analyses were compared according to the specified procedures of each investigation. Results indicated that 2000 frames should be used as the SOI length. The SOI could be selected at any location along the sample as long as well-delineated glottal areas were observed. With the current findings, a more conclusive measurement protocol is available to ensure reliable LHSV-based measures. The findings further support this analysis method for clinical application, which in turn promote LHSV as a reliable laryngeal imaging tool in clinical setting.
    Matched MeSH terms: Video Recording
  12. Mehbodniya AH, Moghavvemi M, Narayanan V, Waran V
    World Neurosurg, 2019 Feb;122:e449-e454.
    PMID: 30347306 DOI: 10.1016/j.wneu.2018.10.069
    BACKGROUND: Navigation (image guidance) is an essential tool in modern neurosurgery, and most surgeons use an optical tracking system. Although the technology is accurate and reliable, one often is confronted by line of sight issues that interrupt the flow of an operation. There has been feedback on the matter, but the actual problem has not been accurately quantified, therefore making this the primary aim of this study. It is particularly important given that robotic technology is gradually making its way into neurosurgery and most of these devices depend on optical navigation when procedures are being conducted.

    METHODS: In this study, the frequency and causes of line of sight issues is assessed using recordings of Navigation probe locations and its synchronised video recordings.

    RESULTS: The mentioned experiment conducted for a series of 15 neurosurgical operations. This issue occured in all these surgeries except one. Maximum duration of issue presisting reached up to 56% of the navigation usage time.

    CONCLUSIONS: The arrangment of staff and equipment is a key factor in avoiding this issue.

    Matched MeSH terms: Video Recording
  13. Tattersall GJ, Danner RM, Chaves JA, Levesque DL
    J Therm Biol, 2020 Jul;91:102611.
    PMID: 32716861 DOI: 10.1016/j.jtherbio.2020.102611
    Infrared thermal imaging is a passive imaging technique that captures the emitted radiation from an object to estimate surface temperature, often for inference of heat transfer. Infrared thermal imaging offers the potential to detect movement without the challenges of glare, shadows, or changes in lighting associated with visual digital imaging or active infrared imaging. In this paper, we employ a frame subtraction algorithm for extracting the pixel-by-pixel relative change in signal from a fixed focus video file, tailored for use with thermal imaging videos. By summing the absolute differences across an entire video, we are able to assign quantitative activity assessments to thermal imaging data for comparison with simultaneous recordings of metabolic rates. We tested the accuracy and limits of this approach by analyzing movement of a metronome and provide an example application of the approach to a study of Darwin's finches. In principle, this "Difference Imaging Thermography" (DIT) would allow for activity data to be standardized to energetic measurements and could be applied to any radiometric imaging system.
    Matched MeSH terms: Video Recording/methods*; Video Recording/standards
  14. Ancrenaz M, Sollmann R, Meijaard E, Hearn AJ, Ross J, Samejima H, et al.
    Sci Rep, 2014;4:4024.
    PMID: 24526001 DOI: 10.1038/srep04024
    The orangutan is the world's largest arboreal mammal, and images of the red ape moving through the tropical forest canopy symbolise its typical arboreal behaviour. Records of terrestrial behaviour are scarce and often associated with habitat disturbance. We conducted a large-scale species-level analysis of ground-based camera-trapping data to evaluate the extent to which Bornean orangutans Pongo pygmaeus come down from the trees to travel terrestrially, and whether they are indeed forced to the ground primarily by anthropogenic forest disturbances. Although the degree of forest disturbance and canopy gap size influenced terrestriality, orangutans were recorded on the ground as frequently in heavily degraded habitats as in primary forests. Furthermore, all age-sex classes were recorded on the ground (flanged males more often). This suggests that terrestrial locomotion is part of the Bornean orangutan's natural behavioural repertoire to a much greater extent than previously thought, and is only modified by habitat disturbance. The capacity of orangutans to come down from the trees may increase their ability to cope with at least smaller-scale forest fragmentation, and to cross moderately open spaces in mosaic landscapes, although the extent of this versatility remains to be investigated.
    Matched MeSH terms: Video Recording
  15. Hashim N, Hemalatha N, Thangaraj K, Kareem A, Ahmed A, Hassan NF, et al.
    Forensic Sci Int, 2015 Aug;253:137.e1-7.
    PMID: 26103928 DOI: 10.1016/j.forsciint.2015.05.020
    A research that tested the methods suitable for comparing ante- and post-mortem radiographic patterns of frontal sinuses concluded that superimposition should be followed as a stringent method for establishing individual identification. We verified the practical relevance of prescribing superimposition by superimposing ante- and post-mortem frontal sinus patterns recorded in case situations as well as simulated ante- and post-mortem of frontal sinus patterns recorded using archived skulls. For superimposition, the wipe facility available in the vision mixer was employed in addition to the mix mode. Ante- and post-mortem radiographic patterns that were available in two earlier cases were not superimposable. Related simulated ante- and post-mortem radiographic patterns of frontal sinuses are superimposable only when the skull that is initially oriented for recording the ante-mortem radiograph is retained in the same posture for recording the post-mortem radiograph also. Once the skull has been removed from the X-ray table, after recording the simulated ante-mortem radiograph, and repositioned for the simulated post-mortem radiograph, even when the intervening time is 1min, the sinus patterns in these radiographs are not superimposable. Superimposition cannot be used as a conditional requirement for side-by-side comparison of radiographic patterns of frontal sinuses.
    Matched MeSH terms: Video Recording
  16. Hussein Md Zan, Shapie, Sinatu Sadiah, Rahim Ishak, Md Saifuddin Yusop, Seri Rahayu Kama
    MyJurnal
    Precast concrete panel is one of the Industrial Building System (IBS) components currently used in modern construction industry, especially, in a highly populated urban area in Malaysia, owing to its cost and time efficiency in a project completion. However, the constraints lie in Musculoskeletal Disorders (MSDs) when IBS workers manually lift the concrete panel repeatedly. The aim of this study is to analyze the recommended weight limit (RWL), lifting index (LI) and physiological experience among workers while lifting precast concrete panel with 3300mm x 600mm size and compressive strength of 40MPa. The methods involved include a survey through the Nordic questionnaires, interview sessions, NIOSH lifting index calculation, recommended work limit calculation, Rapid Upper Limb Assessment (RULA) and video recording. The results yielded the MSDs problem. The guidelines of recommended weight limit and lifting index are produced. They benefit workers and increase their awareness on the MSDs issues.
    Matched MeSH terms: Video Recording
  17. Wan Faizatul Azirah Ismayatim, Nur Dalila Mohamad Nazri, Ramiaida Darmi, Nursyuhada’ Ab Wahab, Nur Adibah Zamri, Haliza Harun, et al.
    Jurnal Inovasi Malaysia, 2020;4(1):173-192.
    MyJurnal
    This paper presents an innovation of a revolutionized self-directed English learning module entitled My Electronic Visual and Audio (MyEVO), which is designed and developed to assist language learners to conveniently acquire the required listening skills through the combination of current and state-of-the-art technology - Augmented Reality (AR) and mobile applications. Using Video Media method introduced by Gruba (1997, 2004), all listening practices in this module are based on video recording. Feedbacks gained from the users of the module indicate that learners are very excited and happy to use technology assisted module in acquiring listening skills compared to the traditional module. Educators also believe that this module cater the needs of the 21st century learners and is suitable to be used inside the classroom or as a self-directed learning module. Another key feature of this smart module highlighted by the educators is the ability of the mobile application that allows learners to engage with the e-global community known as ‘MyEVO community, where all users can share their answers and exchange opinions regarding the given questions. In addition, listening activities that were designed in this module also cover the Higher Order Thinking Skills (HOTS) needed in learning. Educators also agreed that this interactive feature does not only encourage the learners to be active in their learning but it also helps to reduce their anxiety, learning process becomes more interesting and helps to aid their understanding of the topics covered.
    Matched MeSH terms: Video Recording
  18. Rodde C, Vandeputte M, Trinh TQ, Douchet V, Canonne M, Benzie JAH, et al.
    Front Genet, 2020;11:596521.
    PMID: 33519898 DOI: 10.3389/fgene.2020.596521
    Accurately measuring the phenotype at the individual level is critical to the success of selective breeding programs. Feed efficiency is a key sustainability trait and is typically approached through feed conversion ratio (FCR). This requires measurements of body weight gain (BWG) and feed intake (FI), the latter being technically challenging in fish. We assessed two of the principal methods for measuring feed intake in fish over consecutive days: (1) group rearing 10 fish per group and video recording the meals and (2) rearing fish individually on a restricted ration. Juvenile Nile tilapia (Oreochromis niloticus) from the Genetically Improved Farmed Tilapia (GIFT) strain and the Cirad strain were entered into the study (128 GIFT and 109 Cirad). The GIFT strain were reared over three consecutive periods of 7 days each under different feeding, recording, and rearing scenarios (i) in groups fed an optimal ration (g100) or (ii) fed a 50% restricted ration (g50) both with video records of all meals and (iii) reared in isolation and fed a 50% restrictive ration. The Cirad strain were tested similarly but only for scenarios (i) and (iii). All fish were fed twice daily with a calculated ration. Correlations showed the same trends for the GIFT and the Cirad strains. For the GIFT strain, correlations were positive and significant for BWG and FI measured in scenarios (i) and (ii), 0.49 and 0.63, respectively, and FI measured in scenarios (i) and (iii) (0.50) but not for BWG measured in scenarios (i) and (iii) (0.29, NS). The phenotypic correlation estimated for FCR between scenarios (i) and (ii) with fish fed an optimal or a 50% restricted ration was low and not significant (0.22). Feed Conversion Ratio for GIFT fish reared in groups or in isolation and fed with a restricted ration [scenarios (ii) and (iii)] were not significantly correlated either. Social interactions between fish, potentially impacting their efficiency, may explain the results. Therefore, selective breeding programs seeking to improve feed efficiency will need to carefully plan the feeding rate and the rearing system used to estimate FCR in order to optimize selection for the targeted production system.
    Matched MeSH terms: Video Recording
  19. Ahmad Syariff Ahmad Tajudin, Mohammad Hamka Nizam Mohamad Rosni, Lee, Jeffrey Low Fook
    MyJurnal
    The purpose of this study was to compare the acquisition of performing the squat technique using visual and verbal feedback among eleven years old children. Thirty standard 5 students from a semi urban primary school were recruited for this study. Each participant performed the squat without any provision of feedback in the pre-test. Their performance was assessed using the Motion Competency Screen (MCS) scale. The pre-test scores were used to divide the participants randomly into three groups (i.e., visual-, verbal-feedback and control). During the acquisition phase (two weeks), the visual group (video recordings of their performance) received feedback about the correct squat technique by a qualified trainer while the verbal feedback group received verbal instructions and feedback from the same instructor on their performance. The control group did not participate in any trials during acquisition phase. All participants were tested again in the post- and retention test a week after the post-test. A 3 group x 3 tests mixed between-within ANOVA with repeated measures on the second factor was used to measure the between and within group mean differences. There was no significant different between groups for the pre-test. However, both the visual and the verbal feedback groups were significantly better than the control group in the post test. However, in the retention test, the verbal group significantly outperformed the visual group. Again both groups were significantly better than the control group. In conclusion, both visual and verbal feedbacks were effective in learning a motor skill. Interestingly, verbal feedback showed to be more effective for long term retention (learning).
    Matched MeSH terms: Video Recording
  20. Azra MN, Ikhwanuddin M, Abol-Munafi AB
    Data Brief, 2019 Feb;22:998-1002.
    PMID: 30740484 DOI: 10.1016/j.dib.2019.01.026
    This article investigated how crabs responded to different culture temperatures especially dislocation before molting using a combination of large recording files and computer software. In this novel approach of video recording portunid crab behavioral data, crab culture was recorded at five different acclimation temperatures of 20, 24, 28, 32 and 36 °C. Crabs were reared until the instar stage before being acclimatized for video recording. Large video files (MPEG-TS) were then analyzed using the latest version of Solomon Coder software developed by A. Peter and programmed with Embarcadero® Delphi® XE [1]. Recorded data was analyzed by calculating and marking movements of crabs using the time sequence tool. Additionally, a total movement was counted 30 min before crabs molted from instar stage 8 to instar stage 9. Part of the data is associated with the research article "Thermal tolerance and locomotor activity of blue swimmer crab Portunus pelagicus instar reared at different temperatures" (Azra et al., 2018) [2] and provided here as raw data of Supplementary materials.
    Matched MeSH terms: Video Recording
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links