Displaying publications 1 - 20 of 27 in total

Abstract:
Sort:
  1. Velayutham TS, Nguan HS, Ng BK, Gan WC, Manickam Achari V, Zahid NI, et al.
    Phys Chem Chem Phys, 2016 06 01;18(22):15182-90.
    PMID: 27199168 DOI: 10.1039/c6cp00583g
    The molecular dynamics of a synthetic branched chain glycolipid, 2-decyl-tetradecyl-β-d-maltoside (C14-10G2), in the dry assemblage of smectic and columnar liquid crystal phases has been studied by dielectric spectroscopy as a function of frequency and temperature during the cooling process. Strong relaxation modes were observed corresponding to the tilted smectic and columnar phases, respectively. At low frequency (∼900 Hz to 1 kHz) in the smectic phase, Process I* was observed due to the tilted sugar bilayer structure. The process continued in the columnar phase (Process I) with an abrupt dynamic change due to phase transition in the frequency range of ∼1.3 kHz to 22 kHz. An additional process (Process II) was observed in the columnar phase with a broader relaxation in the frequency range of ∼10 Hz to 1 kHz. A bias field dependence study was performed in the columnar phase and we found that the relaxation strength rapidly decreased with increased applied dc bias field. This relaxation originates from a collective motion of polar groups within the columns. The results of dielectric spectroscopy were supported by a molecular dynamics simulation study to identify the origin of the relaxation processes, which could be related to the chirality and hydrogen bonds of the sugar lipid.
    Matched MeSH terms: Maltose/analogs & derivatives*; Maltose/chemistry
  2. Mahalapbutr P, Lee VS, Rungrotmongkol T
    J Agric Food Chem, 2020 Jul 29;68(30):7974-7983.
    PMID: 32551626 DOI: 10.1021/acs.jafc.0c02580
    Human sweet taste receptor (hSTR) recognizes a wide array of sweeteners, resulting in sweet taste perception. Maltitol and lactitol have been extensively used in place of sucrose due to their capability to prevent dental caries. Herein, several molecular modeling approaches were applied to investigate the structural and energetic properties of these two polyols/hSTR complexes. Triplicate 500 ns molecular dynamics (MD) simulations and molecular mechanics/generalized Born surface area (MM/GBSA)-based free energy calculations revealed that the TAS1R2 monomer is the preferential binding site for maltitol and lactitol rather than the TAS1R3 region. Several polar residues (D142, S144, Y215, D278, E302, R383, and especially N143) were involved in polyols binding through electrostatic attractions and H-bond formations. The molecular complexation process not only induced the stable form of ligands but also stimulated the conformational adaptation of the TAS1R2 monomer to become a close-packed structure through an induced-fit mechanism. Notably, the binding affinity of the maltitol/TAS1R2 complex (ΔGbind of -17.93 ± 1.49 kcal/mol) was significantly higher than that of the lactitol/TAS1R2 system (-8.53 ± 1.78 kcal/mol), in line with the experimental relative sweetness. These findings provide an in-depth understanding of the differences in the sweetness response between maltitol and lactitol, which could be helpful to design novel polyol derivatives with higher sweet taste perception.
    Matched MeSH terms: Maltose/analogs & derivatives*; Maltose/metabolism; Maltose/chemistry
  3. Samad MY, Salleh AB, Razak CN, Ampon K, Yunus WM, Basri M
    World J Microbiol Biotechnol, 1990 Dec;6(4):390-4.
    PMID: 24430138 DOI: 10.1007/BF01202120
    Two strains ofRhizopus rhizopodiformis that produced lipases in broth culture were isolated. Maximum lipase production (23 U/ml) was obtained after 72 h culture. Both the crude lipases were stable at 50°C for 30 min and at 45°C for 24 h. Maltose was the best carbon source and peptone the best nitrogen source for the production of lipases. Only glycerol and lecithin stimulated lipase production further.
    Matched MeSH terms: Maltose
  4. Ho, L. H., Pulsawat, M. M.
    MyJurnal
    The aim of the present work was to produce low sugar cookies by partial substitution with a
    sugar replacer (i.e. maltitol, sorbitol, and isomalt) for sucrose. Four different types of cookies
    were prepared. Sucrose was replaced by maltitol, sorbitol, and isomalt at 50% level (based on
    relative degree of sweetness of sucrose) to produce CMAL50, CSOR50, and CISO50, respectively. Cookies that contained sucrose represented the control. All the cookies produced were
    analysed for chemical properties, physical properties, and sensorial acceptance. The chemical
    analysis results indicated that CMAL50, CSOR50, and CISO50 had higher moisture, crude
    fibre, and the total carbohydrate content, but with lower ash, crude protein, crude fat, calories,
    and total sugar content than the control. CSOR50 showed the lowest total sugar content; thus,
    could be denoted as ‘low sugar’ cookies. Cookies containing maltitol and isomalt presented
    good physical quality. The hardness value of cookies decreased with 50% substitution of
    sorbitol and isomalt for sucrose. CISO50 showed the lowest lightness and yellowness values
    than other cookie samples. The sensory evaluation results showed that the cookies incorporated with maltitol and isomalt did not influence the overall acceptability of cookies. In conclusion, the replacement of sucrose with maltitol, sorbitol, and isomalt could reduce sugar and
    daily calorie intake. However, sorbitol substitution at 50% level is feasible to produce ‘low
    sugar’ cookies, and this cookie could provide benefits to weight and health-conscious
    consumers.
    Matched MeSH terms: Maltose
  5. Jamilah, B., Shu, C. E., Kharidah, M., Dzulkifly, M. A., Noranizan, A.
    MyJurnal
    Pitaya peel (Hylocereus polyrhizus), which consists approximately 22% of the whole fruit weight, is discarded during processing. Physico-chemical properties of the discarded pitaya peel were determined in
    order to evaluate its potential for recovery of any value-added materials. The moisture content of the peel was approximately 92.7% and it was low in total soluble solids, protein, ash and fat content. Betacyanin pigment (150.46 ± 2.19 mg/100 g) and pectin (10.8%) were high in the peel. Glucose, maltose and fructose were detected in the peel but not sucrose and galactose. The peel also had very high insoluble and soluble dietary fibre which had exhibited a good ratio of insoluble dietary fibre to soluble dietary fibre (3.8: 1.0).
    Matched MeSH terms: Maltose
  6. Eko Sukohidayat NH, Zarei M, Baharin BS, Manap MY
    Molecules, 2018 Jul 20;23(7).
    PMID: 30037038 DOI: 10.3390/molecules23071800
    Purification of lipase produced by L. mesenteroides subsp. mesenteroides ATCC 8293 was conducted for the first time using a novel aqueous two-phase system (ATPS) composed of Triton X-100 and maltitol. The partitioning of lipase was optimized according to several parameters including pH, temperature, and crude load. Results showed that lipase preferentially migrated to the Triton X-100 rich phase and optimum lipase partitioning was achieved in ATPS at TLL of 46.4% and crude load of 20% at 30 °C and pH 8, resulting in high lipase purification factor of 17.28 and yield of 94.7%. The purified lipase showed a prominent band on SDS-PAGE with an estimated molecular weight of 50 kDa. The lipase was stable at the temperature range of 30⁻60 °C and pH range of 6⁻11, however, it revealed its optimum activity at the temperature of 37 °C and pH 8. Moreover, lipase exhibited enhanced activity in the presence of non-ionic surfactants with increased activity up to 40%. Furthermore, results exhibited that metals ions such as Na⁺, Mg2+, K⁺ and Ca2+ stimulated lipase activity. This study demonstrated that this novel system could be potentially used as an alternative to traditional ATPS for the purification and recovery of enzymes since the purified lipase still possesses good process characteristics after undergoing the purification process.
    Matched MeSH terms: Maltose/analogs & derivatives; Maltose/pharmacology; Maltose/chemistry
  7. Maulana AF, Maksum IP, Sriwidodo S, Rukayadi Y
    J Mol Model, 2024 Apr 18;30(5):136.
    PMID: 38634946 DOI: 10.1007/s00894-024-05934-z
    CONTEXT: Further understanding of the molecular mechanisms is necessary since it is important for designing new drugs. This study aimed to understand the molecular mechanisms involved in the design of drugs that are inhibitors of the α-glucosidase enzyme. This research aims to gain further understanding of the molecular mechanisms underlying antidiabetic drug design. The molecular docking process yielded 4 compounds with the best affinity energy, including γ-Mangostin, 1,6-dimethyl-ester-3-isomangostin, 1,3,6-trimethyl-ester-α-mangostin, and 3,6,7-trimethyl-ester-γ-mangostin. Free energy calculation with molecular mechanics with generalized born and surface area solvation indicated that the 3,6,7-trimethyl-γ-mangostin had a better free energy value compared to acarbose and simulated maltose together with 3,6,7-trimethyl-γ-mangostin compound. Based on the analysis of electrostatic, van der Waals, and intermolecular hydrogen interactions, 3,6,7-trimethyl-γ-mangostin adopts a noncompetitive inhibition mechanism, whereas acarbose adopts a competitive inhibition mechanism. Consequently, 3,6,7-trimethyl-ester-γ-mangostin, which is a derivative of γ-mangostin, can provide better activity in silico with molecular docking approaches and molecular dynamics simulations.

    METHOD: This research commenced with retrieving protein structures from the RCSB database, generating the formation of ligands using the ChemDraw Professional software, conducting molecular docking with the Autodock Vina software, and performing molecular dynamics simulations using the Amber software, along with the evaluation of RMSD values and intermolecular hydrogen bonds. Free energy, electrostatic interactions, and Van der Waals interaction were calculated using MM/GBSA. Acarbose, used as a positive control, and maltose are simulated together with test compound that has the best free energy. The forcefields used for molecular dynamics simulations are ff19SB, gaff2, and tip3p.

    Matched MeSH terms: Maltose
  8. Chai KP, Othman NF, Teh AH, Ho KL, Chan KG, Shamsir MS, et al.
    Sci Rep, 2016 Mar 15;6:23126.
    PMID: 26975884 DOI: 10.1038/srep23126
    A new subfamily of glycosyl hydrolase family GH13 was recently proposed for α-amylases from Anoxybacillus species (ASKA and ADTA), Geobacillus thermoleovorans (GTA, Pizzo, and GtamyII), Bacillus aquimaris (BaqA), and 95 other putative protein homologues. To understand this new GH13 subfamily, we report crystal structures of truncated ASKA (TASKA). ASKA is a thermostable enzyme capable of producing high levels of maltose. Unlike GTA, biochemical analysis showed that Ca(2+) ion supplementation enhances the catalytic activities of ASKA and TASKA. The crystal structures reveal the presence of four Ca(2+) ion binding sites, with three of these binding sites are highly conserved among Anoxybacillus α-amylases. This work provides structural insights into this new GH13 subfamily both in the apo form and in complex with maltose. Furthermore, structural comparison of TASKA and GTA provides an overview of the conformational changes accompanying maltose binding at each subsite.
    Matched MeSH terms: Maltose/chemistry*
  9. Chai YY, Rahman RN, Illias RM, Goh KM
    J Ind Microbiol Biotechnol, 2012 May;39(5):731-41.
    PMID: 22246222 DOI: 10.1007/s10295-011-1074-9
    Two genes that encode α-amylases from two Anoxybacillus species were cloned and expressed in Escherichia coli. The genes are 1,518 bp long and encode 506 amino acids. Both sequences are 98% similar but are distinct from other well-known α-amylases. Both of the recombinant enzymes, ASKA and ADTA, were purified using an α-CD-Sepharose column. They exhibited an optimum activity at 60°C and pH 8. Both amylases were stable at pH 6-10. At 60°C in the absence of Ca²⁺, negligible reduction in activity for up to 48 h was observed. The activity half-life at 65°C was 48 and 3 h for ASKA and ADTA, respectively. In the presence of Ca²⁺ ions, both amylases were highly stable for at least 48 h and had less than a 10% decrease in activity at 70°C. Both enzymes exhibited similar end-product profiles, and the predominant yield was maltose (69%) from starch hydrolysis. To the best of our knowledge, most α-amylases that produce high levels of maltose are active at an acidic to neutral pH. This is the first report of two thermostable, alkalitolerant recombinant α-amylases from Anoxybacillus that produce high levels of maltose and have an atypical protein sequence compared with known α-amylases.
    Matched MeSH terms: Maltose/metabolism*
  10. Syamila N, Syahir A, Ikeno S, Tan WS, Ahmad H, Ahmad Tajudin A
    Colloids Surf B Biointerfaces, 2020 Jan 01;185:110623.
    PMID: 31735420 DOI: 10.1016/j.colsurfb.2019.110623
    Bio-nanogate involves synthesized or natural molecules as a 'gate' towards bioreceptors and responds upon the presence of targeted analytes in nanoscale dimension. Development of bio-nanogate improves analyte selectivity and signal response across various types of biosensors. The versatility of PAMAM dendrimers to form conjugates with guest molecules, such as proteins can be utilized in forming a bio-nanogate. PAMAM interaction with peptide bioreceptor for antibody detection is of interest in this study. This study investigated the interaction of synthesized immunogenic 'a' determinant (aD) region of hepatitis B virus surface antigen (HBsAg) with PAMAM G4 and anti-HBsAg antibody, as a potential bio-nanogate for anti-HBsAg detection. The aD peptide fused with maltose binding protein (MBP), was confirmed with Western blotting. Nano-Differential Scanning Fluorimetry (nano-DSF) study revealed that the interaction of MBP-aD with anti-HBsAg indicated a higher thermal stability as compared to its interaction with PAMAM G4. Electrochemical impedance spectroscopy showed that a higher binding constant of MBP-aD interaction with anti-HBsAg (0.92 μM-1) was observed at maximum saturation, as compared with PAMAM G4 (0.07 μM-1). Thermodynamic parameters demonstrated that MBP-aD interacted with anti-HBsAg and PAMAM G4, through van der Waals and hydrogen bonding. These analyses suggest that the weak interaction of MBP-aD and PAMAM G4 may form a potential bio-nanogate. It is hypothesized that the presence of anti-HBsAg has a higher affinity towards MBP-aD which may displace PAMAM G4 in the anti-HBsAg detection system. This interaction study is crucial as an initial platform of using peptide-PAMAM as a bio-nanogate in an antibody detection system.
    Matched MeSH terms: Maltose-Binding Proteins/metabolism
  11. Kahar UM, Ng CL, Chan KG, Goh KM
    Appl Microbiol Biotechnol, 2016 Jul;100(14):6291-307.
    PMID: 27000839 DOI: 10.1007/s00253-016-7451-6
    Type I pullulanases are enzymes that specifically hydrolyse α-1,6 linkages in polysaccharides. This study reports the analyses of a novel type I pullulanase (PulASK) from Anoxybacillus sp. SK3-4. Purified PulASK (molecular mass of 80 kDa) was stable at pH 5.0-6.0 and was most active at pH 6.0. The optimum temperature for PulASK was 60 °C, and the enzyme was reasonably stable at this temperature. Pullulan was the preferred substrate for PulASK, with 89.90 % adsorbance efficiency (various other starches, 56.26-72.93 % efficiency). Similar to other type I pullulanases, maltotriose was formed on digestion of pullulan by PulASK. PulASK also reacted with β-limit dextrin, a sugar rich in short branches, and formed maltotriose, maltotetraose and maltopentaose. Nevertheless, PulASK was found to preferably debranch long branches at α-1,6 glycosidic bonds of starch, producing amylose, linear or branched oligosaccharides, but was nonreactive against short branches; thus, no reducing sugars were detected. This is surprising as all currently known type I pullulanases produce reducing sugars (predominantly maltotriose) on digesting starch. The closest homologue of PulASK (95 % identity) is a type I pullulanase from Anoxybacillus sp. LM14-2 (Pul-LM14-2), which is capable of forming reducing sugars from starch. With rational design, amino acids 362-370 of PulASK were replaced with the corresponding sequence of Pul-LM14-2. The mutant enzyme formed reducing sugars on digesting starch. Thus, we identified a novel motif involved in substrate specificity in type I pullulanases. Our characterization may pave the way for the industrial application of this unique enzyme.
    Matched MeSH terms: Maltose/analogs & derivatives; Maltose/chemistry
  12. Shen Ni L, Allaudin ZN, Mohd Lila MA, Othman AM, Othman FB
    BMC Cancer, 2013 Oct 21;13:488.
    PMID: 24144306 DOI: 10.1186/1471-2407-13-488
    BACKGROUND: Chicken Anemia Virus (CAV) VP3 protein (also known as Apoptin), a basic and proline-rich protein has a unique capability in inducing apoptosis in cancer cells but not in normal cells. Five truncated Apoptin proteins were analyzed to determine their selective ability to migrate into the nucleus of human breast adenocarcinoma MCF-7 cells for inducing apoptosis.

    METHODS: For identification of the minimal selective domain for apoptosis, the wild-type Apoptin gene had been reconstructed by PCR to generate segmental deletions at the N' terminal and linked with nuclear localization sites (NLS1 and NLS2). All the constructs were fused with maltose-binding protein gene and individually expressed by in vitro Rapid Translation System. Standardized dose of proteins were delivered into human breast adenocarcinoma MCF-7 cells and control human liver Chang cells by cytoplasmic microinjection, and subsequently observed for selective apoptosis effect.

    RESULTS: Three of the truncated Apoptin proteins with N-terminal deletions spanning amino acid 32-83 retained the cancer selective nature of wild-type Apoptin. The proteins were successfully translocated to the nucleus of MCF-7 cells initiating apoptosis, whereas non-toxic cytoplasmic retention was observed in normal Chang cells. Whilst these truncated proteins retained the tumour-specific death effector ability, the specificity for MCF-7 cells was lost in two other truncated proteins that harbor deletions at amino acid 1-31. The detection of apoptosing normal Chang cells and MCF-7 cells upon cytoplasmic microinjection of these proteins implicated a loss in Apoptin's signature targeting activity.

    CONCLUSIONS: Therefore, the critical stretch spanning amino acid 1-31 at the upstream of a known hydrophobic leucine-rich stretch (LRS) was strongly suggested as one of the prerequisite region in Apoptin for cancer targeting. Identification of this selective domain provides a platform for developing small targets to facilitating carrier-mediated-transport across cellular membrane, simultaneously promoting protein delivery for selective and effective breast cancer therapy.

    Matched MeSH terms: Maltose-Binding Proteins/genetics; Maltose-Binding Proteins/metabolism
  13. Kamarudin F, Gan CY
    Int J Biol Macromol, 2016 Jul;88:280-7.
    PMID: 27044345 DOI: 10.1016/j.ijbiomac.2016.04.003
    Pinto bean pod polysaccharide (PBPP) was successfully extracted with yield of 38.5g/100g and the PBPP gave total carbohydrate and uronic acid contents of 286.2mg maltose equivalent/g and 374.3mgGal/g, respectively. The Mw of PBPP was 270.6kDa with intrinsic viscosity of 0.262dm(3)/g, which composed of mannose (2.5%), galacturonic acid (15.0%), rhamnose (4.0%), glucose (9.0%), galactose (62.2%), xylose (2.9%) and arabinose (4.3%) with trace amount of ribose and fucose. The result suggested that PBPP has a spherical conformation with a highly branched structure. Fourier Transform Infrared analysis showed that PBPP has a similar structure as commercial pectin with an esterification degree of 59.9%, whereas scanning electron microscopy study showed that the crude polysaccharide formed a thin layer of film that was made of multiple micro strands of fibre. PBPP exhibited substantial free radical scavenging activity (7.7%), metal reducing capability (2.04mmol/dm(3)) and α-amylase inhibitory activity (97.6%) at a total amount of 1mg. PBPP also exhibited high water- and oil-holding capacities (3.6g/g and 2.8g/g, respectively). At a low concentration, PBPP exhibited emulsifying activity of 39.6% with stability of 38.6%. Apart from that, PBPP was able to show thickening capability at low concentration (0.005kg/dm(3)).
    Matched MeSH terms: Maltose
  14. Yee W
    Bioresour Technol, 2015 Nov;196:1-8.
    PMID: 26210717 DOI: 10.1016/j.biortech.2015.07.033
    In order to assess the feasibility of various carbon sources and plant materials in increasing the growth rate and biomass productivity of Monoraphidium griffithii, ten carbon sources as well as six plant materials were tested in mixotrophic cultures with or without aeration. It was found that glucose, fructose, maltose, sodium acetate and mannitol were potential carbon sources for growth enhancement of M. griffithii. Supplementation of culture medium with these carbon sources resulted in approximately 1-4-fold increase in cell density compared to control in a small scale culture. In a larger scale mixotrophic culture with aeration, 0.05% mannitol and 0.1% fructose resulted in a decent 1-1.5-fold increase in final cell density, approximately 2-fold increase in growth rate and 0.5-1-fold increase in dry biomass weight. Findings from this study suggests that glucose, fructose, maltose and mannitol were potential organic carbon sources for mixotrophic culture of M. griffithii.
    Matched MeSH terms: Maltose
  15. Zhou JN, Liu SY, Chen YF, Liao LS
    Plant Dis, 2015 Mar;99(3):416.
    PMID: 30699721 DOI: 10.1094/PDIS-10-14-1025-PDN
    Clausena lansium, also known as wampee (Clausena wampi), is a plant species native to China, Vietnam, the Philippines, Malaysia, and Indonesia, where it is widely cultivated, and also grown in India, Sri Lanka, Queensland, Florida, and Hawaii, but less frequently (3). The fruit can be consumed fresh or made into juice, jam, or succade. In summer to fall 2014, a soft rot disease was found in a wampee planting region in Yunan County, Guangdong Province, China. On Sept. 18, we collected diseased samples from a wampee orchard with about 20% disease incidence. The infected fruit initially showed pinpoint spots on the peel, water-soaked lesions, and light to dark brown discoloration. Spots expanded in 2 days, and tissues collapsed after 5 days. Severely affected fruit showed cracking or nonodorous decay. Five diseased samples were collected, and causal agents were isolated from symptomatic tissues 1 cm under the peel after surface sterilization in 0.3% NaOCl for 10 min and rinsing in sterile water three times. Tissues were placed on a Luria Bertani (LB) plate for culture. Ten representative isolates were selected for further characterization. No colony was isolated from healthy tissues. Colonies were round, smooth, with irregular edges, and produced a yellow pigment in culture. Biolog identification (Version 4.20.05) showed that all strains were gram negative, negative for indole production, and utilized glucose, maltose, trehalose, sucrose, D-lactose, and pectin but not sorbitol or gelatin. The isolates were identified as Pantoea agglomerans (SIM 0.69). Multilocus sequence analysis (MLSA) was conducted for rapid classification of the strains. Sequences of atpD, gyrB, infB, and rpoB were amplified using corresponding primers (2). All sequences of the 10 isolates were identical in each gene. BLASTn was performed, and maximum likelihood trees based on the concatenated nucleotide sequences of the four genes were constructed using MEGA6. Bootstrap values after 1,000 replicates were expressed as percentages. Results showed that the tested strain named CL1 was most homologous to P. anthophila, with 98% identity for atpD (KM521543), 100% for gyrB (KM521544), infB (KM521545), and rpoB (KM521546). The 16S rRNA sequence (KM521542) amplified by primers 27f and 1492r shared 99% identity with that of P. anthophila M19_2C (JN644500). P. anthophila was previously reclassified from P. agglomerans (3); therefore, we suggest naming this wampee pathogen P. anthophila. Subsequently, 10 wampee fruits were injected with 20 μl of bacterial suspension (1 × 108 CFU/ml) of strains CL1 and CL2, respectively, and another 10 were injected with 20 μl of LB medium as controls, all kept at 28°C for 4 days. Symptoms similar to those of natural infections were observed on inoculated fruits but not on the negative controls. Bacteria were isolated from diseased tissues and further identified as P. anthophila by gyrB sequencing. P. anthophila was reported to naturally infect balsam and marigold (1,2). To our knowledge, this is the first report of P. anthophila naturally causing soft rot disease and cracking on C. lansium (wampee). References: (1) C. Brady et al. Syst. Appl. Microbiol. 31:447, 2008. (2) C. Brady et al. Int. J. Syst. Evol. Microbiol. 59:2339, 2009. (3) J. Morton. Fruits of Warm Climates. Echo Point Books & Media, Miami, FL, 1987.
    Matched MeSH terms: Maltose
  16. Golkhandan E, Kamaruzaman S, Sariah M, Abidin MAZ, Nazerian E, Yassoralipour A
    Plant Dis, 2013 May;97(5):685.
    PMID: 30722205 DOI: 10.1094/PDIS-08-12-0759-PDN
    In August 2011, sweet potato (Ipomoea batatas), tomato (Solanum lycopersicum), and eggplant (S. melongena) crops from major growing areas of the Cameron highlands and Johor state in Malaysia were affected by a soft rot disease. Disease incidence exceeded 80, 75, and 65% in severely infected fields and greenhouses of sweet potato, tomato, and eggplant, respectively. The disease was characterized by dark and small water-soaked lesions or soft rot symptoms on sweet potato tubers, tomato stems, and eggplant fruits. In addition, extensive discoloration of vascular tissues, stem hollowness, and water-soaked, soft, dark green lesions that turned brown with age were observed on the stem of tomato and eggplant. A survey was performed in these growing areas and 22 isolates of the pathogen were obtained from sweet potato (12 isolates), tomato (6 isolates), and eggplant (4 isolates) on nutrient agar (NA) and eosin methylene blue (EMB) (4). The cultures were incubated at 27°C for 2 days and colonies that were emerald green on EMB or white to gray on NA were selected for further studies. All bacterial cultures isolated from the survey exhibited pectolytic ability on potato slices. These bacterial isolates were gram negative; rod shaped; N-acetylglucosaminyl transferase, gelatin liquefaction, and OPNG positive; and were also positive for acid production from D-galactose, lactosemelibiose, raffinose, citrate, and trehalose. They were negative for indol production, phosphatase activity, reducing substances from sucrose, and negative for acid production from maltose, sorbitol, inositol, inolin, melezitose, α-mathyl-D-glocoside, and D-arabitol. The bacteria did not grow on NA at 37°C. Based on these biochemical and morphological assays, the pathogen was identified as Pectobacterium wasabiae (2). In addition, DNA was extracted and PCR assay with two primers (16SF1 and 16SR1) was performed (4). Partial sequences of 16S rRNA (GenBank Accession Nos. JQ665714, JX494234, and JX513960) of sweet potato, tomato, and eggplant, respectively, exhibited a 99% identity with P. wasabiae strain SR91 (NR_026047 and NR_026047.1). A pathogenicity assay was carried out on sweet potato tubers (cv. Oren), tomato stems (cv. 152177-A), and eggplant fruits (cv. 125066x) with 4 randomly representative isolates obtained from each crop. Sweet potato tubers, tomato stems, and eggplant fruits (4 replications) were sanitized in 70% ethyl alcohol for 30 s, washed and rinsed in sterile distilled water, and needle punctured with a bacterial suspension at a concentration of 108 CFU/ml. Inoculated tubers, stems, and fruits were incubated in a moist chamber at 90 to 100% RH for 72 h at 25°C when lesions were measured. All inoculated tubers, stems, and fruits exhibited soft rot symptoms after 72 h similar to those observed in the fields and greenhouses and the same bacteria were consistently reisolated. Symptoms were not observed on controls. The pathogenicty test was repeated with similar results. P. wasabiae have been previously reported to cause soft rot on Japanese horseradish (3), and aerial stem rot on potato in New Zealand (4), the U.S. (2), and Iran (1). To our knowledge, this is the first report of sweet potato, tomato, and eggplant soft rot caused by P. wasabiae in Malaysia. References: (1) S. Baghaee-Ravari et al. Eur. J. Plant Pathol. 129:413, 2011. (2) S. De Boer and A. Kelman. Page 56 in: Laboratory Guide for Identification of Plant Pathogenic Bacteria, 3rd ed. N. Schaad et al., eds. APS Press, St. Paul, 2001. (3) M. Goto et al. Int. J. Syst. Bacteriol. 37:130, 1987. (4) A. R. Pitman et al. Eur. J. Plant Pathol. 126:423, 2010.
    Matched MeSH terms: Maltose
  17. Golkhandan E, Sijam K, Meon S, Ahmad ZAM, Nasehi A, Nazerian E
    Plant Dis, 2013 Aug;97(8):1110.
    PMID: 30722504 DOI: 10.1094/PDIS-01-13-0112-PDN
    Soft rot of cabbage (Brassica rapa) occurs sporadically in Malaysia, causing economic damage under the hot and wet Malaysian weather conditions that are suitable for disease development. In June 2011, 27 soft rotting bacteria were isolated from cabbage plants growing in the Cameron Highlands and Johor State in Malaysia where the economic losses exceeded 50% in severely infected fields and greenhouses. Five independent strains were initially identified as Pectobacterium wasabiae based on their inability to grow at 37°C, and elicit hypersensitive reaction (HR) on Nicotiana tabaccum and their ability to utilize raffinose and lactose. These bacterial strains were gram-negative, rod-shaped, N-acetylglucosaminyl transferase, gelatin liquefaction, and OPNG-positive and positive for acid production from D-galactose, lactosemelibiose, raffinose, citrate, and trehalose. All strains were negative for indole production, phosphatase activity, reducing sucrose, and negative for acid production from maltose, sorbitol, inositol, inolin, melezitose, α-methyl-D-glucoside, and D-arabitol. All the strains exhibited pectolytic activity on potato slices. PCR assays were conducted to distinguish P. wasabiae from P. carotovorum subsp. brasiliensis, P. atrosepticum, and other Pectobacterium species using primers Br1f/L1r (2), Eca1f/Eca2r (1), and EXPCCF/EXPCCR, respectively. DNA from strains did not yield the expected amplicon with the Br1f/L1r and Eca1f/Eca2r, whereas a 550-bp amplicon typical of DNA from P. wasabiae was produced with primers EXPCCF/EXPCCR. ITS-RFLP using the restriction enzyme, Rsa I, produced similar patterns for the Malaysian strains and the P. wasabiae type strain (SCRI488), but differentiated it from P. carotovora subsp. carotovora, P. atrosepticum, P. carotovorum subsp. brasiliensis, and Dickeya chrysanthemi type strains. BLAST analysis of the 16S rRNA DNA sequence (GenBank Accession No. KC445633) showed 99% identity to the 16S rRNA of Pw WPP163. Phylogenetic reconstruction using concatenated DNA sequences of mdh and gapA from P. wasabiae Cc6 (KC484657) and other related taxa (4) clustered Malaysian P. wasabiae strains with P. wasabiae SCRI488, readily distinguishing it from other closely related species of Pectobacterium. Pathogenicity assays were conducted on leaves and stems of four mature cabbage plants for each strain (var. oleifera) by injecting 10 μl of a bacterial suspension (108 CFU/ml) into either stems or leaves, and incubating them in a moist chamber at 80 to 90% relative humidity at 30°C. Water-soaked lesions similar to those observed in the fields and greenhouses were observed 72 h after injection and bacteria with similar characteristics were consistently reisolated. Symptoms were not observed on water-inoculated controls. The pathogenicity test was repeated with similar results. P. wasabiae was previously reported to cause soft rot of horseradish in Japan (3). However, to our knowledge, this is the first report of P. wasabiae infecting cabbage in Malaysia. References: (1) S. H. De Boer and L. J. Ward. Phytopathology 85:854, 1995. (2) V. Duarte et al. J. Appl. Microbiol. 96:535, 2004. (3) M. Goto and K. Matsumoto. Int. J. Syst. Bacteriol. 37:130, 1987. (4) B. Ma et al. Phytopathology 97:1150, 2007.
    Matched MeSH terms: Maltose
  18. Sharifah Azizah, T.N., Nik Shanita, S., Hasnah, H.
    MyJurnal
    The aim of this study was to determine the specific content and type of sugars in selected commercial and traditional kuih in Klang Valley. The selection of the kuih was based on the validated Food Frequency Questionnaire (FFQ) for sugar. The selected commercial kuih was doughnut coated with sugar (Big Apple) while the ten traditional kuih samples consisted of kuih bingka ubi, kuih kasui, kuih keria, kuih koci, kuih lapis, kuih lopes, kuih onde-onde, kuih sagu, kuih seri muka and kuih talam. The doughnut coated with sugar (Big Apple) was purchased from Big Apple Donuts and Coffee franchise at two different locations, while the traditional kuih were randomly bought from stalls, cafeterias and restaurants around Kuala Lumpur and Rawang. The types and amount of sugar were determined using High Performance High Chromatography (HPLC) with a refractive index (RI) detector. Results showed that doughnut coated with sugar (Big Apple) has the highest starch content (22.6±0.3 g/100g) and kuih keria contained the highest available carbohydrate (41.5±1.7 g/100g), comprising of 24.2±2.4 g/100g total sugar and 17.3±0.7 g/100g of starch. The least available carbohydrate content was found in kuih talam (20.0±0.5 g/100g), which was 50% lower than the one in kuih keria. Major individual sugars detected in all kuih samples were consisted of sucrose (60.0%), glucose (16.2%), fructose (14.0%), maltose (9.5%) and lactose (0.3%). Majority of the kuih samples (90.9%) in this study can be categorized as medium sugar while only kuih keria was categorized as high sugar. Based on the two main ingredients (sugar and flour) used in the preparation of kuih, results showed that all kuih samples can be categorized as medium sugarmedium starch. In conclusion, this study served as a guideline by locals in selecting kuih of
    different sugar levels.
    Matched MeSH terms: Maltose
  19. Widowati, W., Akbar, S.H., Tin, M.H.
    MyJurnal
    Enamel demineralization is associated with decrease in saliva pH due to fermentation of sugar by oral commensal. Thus, exploring the changing pattern of saliva pH is meaningful in dental caries prevention. The aim of this study was to compare the changing pattern of saliva pH after consuming different types of sweeteners (sucrose and maltitol). Methods: It was a case-control study involving 14 male patients attending IIUM dental clinic who were selected with the intention of getting seven patients with high caries risk ( DMFT ≥6) and seven patients with low caries risk (DMFT ≤3) with initial saliva pH interval of 6.5 to7.5. Patients were asked to consume snacks containing 8 gram sucrose and 8 gram maltitol as sweeteners. The changing pH values of the saliva were measured by Waterproof pHTestr 10BNC (Oakton, Vernon Hills, USA) seven times consecutively at 0 (before snack consumption), and at 5, 10, 15, 20, 30 and 60 minutes after snack consumption. The pH values of saliva of patients with low and high caries risk after consuming sucrose and maltitol were statistically analized by using Anova and Tukey-HSD tests at α = 0.05. Result: There were significant differences in saliva pH changes between low-risk group and high-risk group after consuming sucrose and maltitol. Conclusion: The changing patterns of saliva pH in high-risk patients were lower than those of low-risk patients after consuming two types of snacks containing sucrose and maltitol.
    Matched MeSH terms: Maltose
  20. Lim, S.N., Zeenathul, N.A., Mohd Azmi, M.L., Abas Mazni, O., Fauziah, O.
    MyJurnal
    Microinjection is a powerful tool to deliver various substances, such as nucleic acids, proteins, peptides, RNA, and synthetic molecules into mammalian cells mechanically. Through microinjection, a controlled amount of protein can be delivered into the target cells to elucidate the specific functional
    effects in vitro. In this study, a series of protein microinjection optimization was performed in human breast cancer cells. The presence of Maltose Binding Protein (MBP) was microscopically monitored through indirect immunofluorescence assay. The optimization experimentation gave a high success rate when MBP protein was used at the minimum concentration of 1.5 mg/ml and at the injection pressures of 50 and 70 hPa. The average success rate of injections was 49.2±4.15% and 50.8±4.6%, while the average cell survivability was 50.98±4.67% and 49.72±5.48% at 50 and 70 hPa, respectively. The optimization of the MBP concentration and injection pressures successfully allowed an efficient delivery of precise protein dosage into breast cancer cells without any adverse effect. This microinjection optimization can be a practical guideline in any downstream applications of protein functional work.
    Matched MeSH terms: Maltose-Binding Proteins
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links