Displaying publications 1 - 20 of 22 in total

Abstract:
Sort:
  1. Hii KU, Kwek KH
    Appl Opt, 2010 Feb 1;49(4):668-72.
    PMID: 20119017 DOI: 10.1364/AO.49.000668
    We present a wavefront reversal technique to produce a dual-field fringe pattern for self-referencing collimation testing in wedge-plate lateral-shear interferometry. The method requires only a suitably placed cubic beam splitter to produce two replicas of the fringe field formed by the wedge-plate lateral-shear interferometer. One of the replicas has a fringe pattern that is the reverse of the other. With these two fringe fields, the collimation testing has a built-in reference, and the detection sensitivity is twice that of a single-wedge-plate technique.
    Matched MeSH terms: Microsurgery
  2. Azab WA
    Childs Nerv Syst, 2023 Dec;39(12):3371-3372.
    PMID: 37328661 DOI: 10.1007/s00381-023-06030-y
    BACKGROUND: One of the main difficulties in third ventricle surgery is its deep and central location within the brain, surrounded by many eloquent neurovascular structures. Such anatomical environment obviously makes it very hard to safely approach and excise lesions in there.

    METHODS: The introduction of the surgical microscope into the neurosurgical field undoubtedly played an important and pivotal role in improving the surgical results and increasing the safety of operations in and around the third ventricle. Although the surgical microscope remained the gold standard of intraoperative visualization for many decades, the advent of endoscopes revolutionized surgery of the third ventricle. Neuroendoscopic procedures for lesions of the third ventricle encompass a greatly variable array of endochannel, endoscope-assisted and endoscope-controlled techniques.

    CONCLUSION: In this collection on purely endoscopic and endoscope-assisted approaches to lesions of the third ventricle in pediatric age, the readership is presented with a selected group of these operations performed by experts in the field, shedding light mainly on their technical aspects and surgical pearls. The text description in each article is supplemented by a surgical video.

    Matched MeSH terms: Microsurgery/methods
  3. Shen XF, Khoo SS
    Hand Clin, 2024 May;40(2):237-248.
    PMID: 38553095 DOI: 10.1016/j.hcl.2023.10.004
    Microsurgery is undoubtedly the pinnacle of hand surgery. Significant advancement in recent years has stretched the indications for toe-to-hand transfer in both acquired and congenital hand defects to restore function, esthetics, and motion, with minimal morbidity to the donor site. There is no one fixed microsurgical transfer technique but a surgeon's versatility and innovation in using what one could spare because each case is unique. Esthetic refinements and reducing donor site morbidities have taken a front seat in recent years. We present a few cases to put forward the senior author's preferred techniques with this objective in mind.
    Matched MeSH terms: Microsurgery/methods
  4. Raman R, Omar R
    PMID: 22754818 DOI: 10.1007/s12070-011-0155-4
    An instrument has been designed to combine a suction and an elevator for use in ear surgery.
    Matched MeSH terms: Microsurgery
  5. Xin Z, Du Y, Zhang C, Zhang B, Qi M, Meng H, et al.
    J Neurosurg Spine, 2024 Sep 01;41(3):407-415.
    PMID: 38848604 DOI: 10.3171/2024.3.SPINE231161
    OBJECTIVE: Intraspinal cysts are uncommon, and the success rate of complete resection is still low for spinal neurenteric cysts (NCs). The aim of this study was to evaluate the efficacies of an anterior microscopic surgical approach in the treatment of ventral and ventrolateral subaxial cervical NCs (SCNCs).

    METHODS: Between 2019 and 2022, 9 patients with NCs of the subaxial spine underwent an anterior microsurgical approach. Their clinical presentations, radiological features, operative findings, and follow-up data were retrospectively reviewed and analyzed.

    RESULTS: All spinal cysts were intradural and extramedullary in origin. Five patients were first-time cases while 4 patients with recurrence underwent revision surgery. The most common clinical manifestation was pain (77.78%). One patient was found to have a concomitant disorder of Klippel-Feil syndrome. Microscopically confirmed gross-total resection was achieved in 8 patients (88.89%) based on clinical comparisons between pre- and postoperative MRI and intraoperative video. One patient had symptom recurrence 1 year after subtotal resection, while there was no evidence of recurrence during follow-up for the other patients. Dense adhesions within the spinal cord were observed in 8 patients (88.89%) intraoperatively. Most importantly, the surgical outcome was significantly improved in all patients, and the mean (± SE) Japanese Orthopaedic Association score increased from 11.33 ± 0.91 preoperatively to 16.22 ± 0.32 postoperatively (p = 0.008).

    CONCLUSIONS: An anterior surgical approach was proven to be both safe and effective in treating the ventral or ventrolateral SCNCs. The authors believe that an anterior microsurgical approach should be considered as a useful approach especially in patients with ventral recurrent SCNCs. Its clinical efficacy compared with a posterior approach in ventral spinal cyst may be better as most of the neurenteric cysts are ventrally or ventrolaterally located.

    Matched MeSH terms: Microsurgery/methods
  6. CMS Collaboration, Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, et al.
    Eur Phys J C Part Fields, 2014 09 26;74(9):3036.
    PMID: 25814912
    Searches for the direct electroweak production of supersymmetric charginos, neutralinos, and sleptons in a variety of signatures with leptons and [Formula: see text], [Formula: see text], and Higgs bosons are presented. Results are based on a sample of proton-proton collision data collected at center-of-mass energy [Formula: see text] with the CMS detector in 2012, corresponding to an integrated luminosity of 19.5 [Formula: see text]. The observed event rates are in agreement with expectations from the standard model. These results probe charginos and neutralinos with masses up to 720 [Formula: see text], and sleptons up to 260 [Formula: see text], depending on the model details.
    Matched MeSH terms: Microsurgery
  7. Rahim NI, Mohammed BS, Al-Fakih A, Wahab MMA, Liew MS, Anwar A, et al.
    Materials (Basel), 2020 Jun 22;13(12).
    PMID: 32580327 DOI: 10.3390/ma13122804
    Deep beams are more susceptible to shear failure, and therefore reparation is a crucial for structural reinforcements. Shear failure is structural concrete failure in nature. It generally occurs without warning; however, it is acceptable for the beam to fail in bending but not in shear. The experimental study presented the structural behavior of the deep beams of reinforced concrete (RC) that reinforces the web openings with externally connected carbon fiber reinforced polymer (CFRP) composite in the shear zone. The structural behavior includes a failure mode, and cracking pattern, load deflection responses, stress concentration and the reinforcement factor were investigated. A total of nine reinforced concrete deep beams with openings strengthened with CFRP and one control beam without an opening have been cast and tested under static four-point bending load till failure. The experimental results showed that the increase the size of the opening causes an increase in the shear strength reduction by up to 30%. Therefore, the larger the openings, the lower the capability of load carriage, in addition to an increase in the number of CFRP layers that could enhance the load carrying capacity. Consequently, utilization of the CFRP layer wrapping technique strengthened the shear behavior of the reinforced concrete deep beams from about 10% to 40%. It was concluded that the most effective number of CFRP layers for the deep beam with opening sizes of 150 mm and 200 mm were two layers and three layers, respectively.
    Matched MeSH terms: Microsurgery
  8. Gunasagaran J, Rasid RJ, Mappiare S, Devarajooh C, Ahmad TS
    Malays Orthop J, 2018 Jul;12(2):37-41.
    PMID: 30112127 MyJurnal DOI: 10.5704/MOJ.1807.007
    Introduction: Microsurgery is a subspecialised field which requires high technical skill. Laboratory training offers good opportunity for novice surgeons to learn and repetitively practise their skills prior to hands-on clinical practice. Commonly, the training programme consists of models in a stepwise increase in fidelity: from latex sheet to anaesthetised rat. We introduce microgrids model as a daily warm up procedure in a 5-day basic microsurgery course. The purpose of this study is to evaluate the correlation between microgrids colouring under magnification with microsuturing proficiency among novice surgeons. Materials and Methods: Participants were required to fill in microgrids under magnification everyday during their 5-day training as a starter test. The number of completely filled in microgrids in 20 seconds was recorded. A simulated cut on latex sheet was sutured and the time taken to apply five sutures was recorded. The sutures were evaluated with modified Global Rating Scale (GRS). Data was analysed with SPSS. Results: There was a statistically significant correlation between the number of microgrids coloured and the time taken to apply five sutures (p<0.01). An increase in number of microgrids coloured was significantly associated with the increase in quality of the suturing technique (p< 0.01). During the 5-day basic microsurgery skills training for novice surgeons, microsuturing skill improvement correlated with microgrid colouring. Conclusion: Microgrids colouring reflected microsuturing proficiency. It is an inexpensive, readily available, and simple model of 'warm up' for hand dexterity. The microgrids model can function as a starter test for initial training and a quick screening measure to assess microsurgical skill.
    Matched MeSH terms: Microsurgery
  9. Waran V, Vairavan N, Sia SF, Abdullah B
    J. Neurosurg., 2009 Dec;111(6):1127-30.
    PMID: 19408977 DOI: 10.3171/2009.4.JNS081506
    The authors describe a newly developed expandable cannula to enable a more efficient use of an endoscope in removing intraparenchymal spontaneous hypertensive intracerebral hematomas. The cannula is introduced like a conventional brain cannula, using neuronavigation techniques to reach the targeted hematoma accurately, and, once deployed, conventional microsurgical techniques are used under direct endoscopic visualization. This method was used in 6 patients, and, based on the results of intraoperative intracranial pressure monitoring and postoperative CT scanning, the authors were able to achieve good hematoma removal. They found that by using the expandable cannula, efficient endoscopic surgery in the brain parenchyma was possible.
    Matched MeSH terms: Microsurgery/instrumentation; Microsurgery/methods
  10. Mohd Hanid MH, Abd Rahim SZ, Gondro J, Sharif S, Al Bakri Abdullah MM, Zain AM, et al.
    Materials (Basel), 2021 Mar 10;14(6).
    PMID: 33802032 DOI: 10.3390/ma14061326
    It is quite challenging to control both quality and productivity of products produced using injection molding process. Although many previous researchers have used different types of optimisation approaches to obtain the best configuration of parameters setting to control the quality of the molded part, optimisation approaches in maximising the performance of cooling channels to enhance the process productivity by decreasing the mould cycle time remain lacking. In this study, optimisation approaches namely Response Surface Methodology (RSM), Genetic Algorithm (GA) and Glowworm Swarm Optimisation (GSO) were employed on front panel housing moulded using Acrylonitrile Butadiene Styrene (ABS). Each optimisation method was analysed for both straight drilled and Milled Groove Square Shape (MGSS) conformal cooling channel moulds. Results from experimental works showed that, the performance of MGSS conformal cooling channels could be enhanced by employing the optimisation approach. Therefore, this research provides useful scientific knowledge and an alternative solution for the plastic injection moulding industry to improve the quality of moulded parts in terms of deformation using the proposed optimisation approaches in the used of conformal cooling channels mould.
    Matched MeSH terms: Microsurgery
  11. Vashu R, Tan S, Wong AS
    J Clin Neurosci, 2009 Jul;16(7):960-2.
    PMID: 19346131 DOI: 10.1016/j.jocn.2008.09.013
    We report on two patients with intra-operative rupture of cerebral aneurysms that were managed by microsuturing. This is one of only a few reports of successful direct repair using suturing. We found that stitching remains an option to repair a tear of a saccular part of an aneurysm and a torn neck of a blister-like aneurysm, and thus this technique can be considered before sacrificing the artery.
    Matched MeSH terms: Microsurgery/methods*
  12. Khanijow VK, Ahmad TS, Lian CB, Jalaludin MA
    Microsurgery, 1993;14(6):375-9.
    PMID: 8371683
    Mandibular resection, following surgery for tumor or osteoradionecrosis, leaves a patient with a swallowing, speech, and cosmetic disability. Repair of the oromandibular defect is difficult and various prostheses and grafts have been used and reported. The most popular form of mandibular reconstruction is the use of the free, vascularized bone transfer. We report our experience with the free vascularized fibula bone transfer in eight patients.
    Matched MeSH terms: Microsurgery*
  13. Prasad SC, Prasad KC, Bhat J
    Med J Malaysia, 2008 Dec;63(5):419-20.
    PMID: 19803307
    Laryngeal hemangiomas are relatively rare. Laryngeal hemangiomas occur in two main forms--infantile and adult laryngeal hemangiomas. While infantile hemangiomas are usually found to occur in the subglottis, adult hemangiomas occur commonly in the supraglottic regions of the larynx. Laryngeal hemangioma with cavernous features isolated to the free edge of the vocal fold is a very rare clinical finding. We present a case of hemangioma of the right vocal cord in an adult, which was managed successfully in our center.
    Matched MeSH terms: Microsurgery
  14. Gupta M, Hawari HF, Kumar P, Burhanudin ZA, Tansu N
    Nanomaterials (Basel), 2021 Mar 03;11(3).
    PMID: 33802318 DOI: 10.3390/nano11030623
    The demand for carbon dioxide (CO2) gas detection is increasing nowadays. However, its fast detection at room temperature (RT) is a major challenge. Graphene is found to be the most promising sensing material for RT detection, owing to its high surface area and electrical conductivity. In this work, we report a highly edge functionalized chemically synthesized reduced graphene oxide (rGO) thin films to achieve fast sensing response for CO2 gas at room temperature. The high amount of edge functional groups is prominent for the sorption of CO2 molecules. Initially, rGO is synthesized by reduction of GO using ascorbic acid (AA) as a reducing agent. Three different concentrations of rGO are prepared using three AA concentrations (25, 50, and 100 mg) to optimize the material properties such as functional groups and conductivity. Thin films of three different AA reduced rGO suspensions (AArGO25, AArGO50, AArGO100) are developed and later analyzed using standard FTIR, XRD, Raman, XPS, TEM, SEM, and four-point probe measurement techniques. We find that the highest edge functionality is achieved by the AArGO25 sample with a conductivity of ~1389 S/cm. The functionalized AArGO25 gas sensor shows recordable high sensing properties (response and recovery time) with good repeatability for CO2 at room temperature at 500 ppm and 50 ppm. Short response and recovery time of ~26 s and ~10 s, respectively, are achieved for 500 ppm CO2 gas with the sensitivity of ~50 Hz/µg. We believe that a highly functionalized AArGO CO2 gas sensor could be applicable for enhanced oil recovery, industrial and domestic safety applications.
    Matched MeSH terms: Microsurgery
  15. Ariffin MHM, Ibrahim K, Baharudin A, Tamil AM
    Asian Spine J, 2019 Oct 15.
    PMID: 31608611 DOI: 10.31616/asj.2019.0075
    Study Design: Prospective observational study (n=74).

    Purpose: To evaluate the learning curve for exoscope and three-dimensional (3D) 4K hybrid visualization in terms of operating time, advantages, disadvantages, and surgical complications in tubular-access minimally invasive spine surgery (MISS) and to assess surgeon satisfaction with image quality, ergonomics, and ability to perform target site treatment.

    Overview of Literature: Working through tubular retractors poses a challenge. The extreme angulations during microsurgical decompression, especially contralateral decompression, require surgeons to work non-ergonomically. An exoscope allows surgeons to work ergonomically and independently of the microscope oculars as visualizations are now provided by large 3D 4K monitors. However, the value and efficacy of solely depending on an exoscope and 3D 4K monitors during microsurgical work are still unknown.

    Methods: Seventy-four patients (99 levels) underwent trans-tubular MISS between March 2018 and January 2019. Five patients were excluded: one had pyogenic discitis, two had revisions, and two were trans-tubular transoral. In total, we analyzed 69 for operating time, blood loss, and complications. The learning curve graph was plotted using the surgical time for each procedure. Surgeons were asked to rate their satisfaction with image quality, ability to maintain ergonomic posture, and efficient target site treatment.

    Results: For tubular microdiscectomy, the operating time plateaued after six cases, and for tubular decompression and minimally invasive transforaminal lumbar interbody fusion, the operating time plateaued after nine cases. Mean operating time was significantly reduced after the plateau. Complications included four cases of dural tear. All patients improved symptomatically, and there were no postoperative neurological deficits.

    Conclusions: Use of the exoscope has a short learning curve. Surgeons benefit from improved ergonomic posture during surgery, and resident teaching appears to be good. The only drawback is the need to rearrange the operating table setup. Complications were comparable to those when using the surgical microscope. An exoscope with hybrid digital visualization provides excellent visualization, depth perception, clarity, and precision target site treatment.

    Matched MeSH terms: Microsurgery
  16. Nah SA, Tan HL, Tamba RP, Aziz DA, Azzam N
    J Pediatr Surg, 2011 Feb;46(2):424-7.
    PMID: 21292104 DOI: 10.1016/j.jpedsurg.2010.11.045
    Necrotizing enterocolitis has a wide clinical spectrum of manifestation. We report a novel method of managing focal isolated perforation in necrotizing enterocolitis by using diagnostic laparoscopy to localize the site of perforation and by making a microincision over the perforation to perform exteriorization or limited resection and primary anastomosis.
    Matched MeSH terms: Microsurgery/methods
  17. Kamarul T, Mansor A, Robson N, Albusaidi SH, Suhaeb AM, Samsudin EZ
    J Orthop Surg (Hong Kong), 2018 1 13;26(1):2309499017749983.
    PMID: 29320962 DOI: 10.1177/2309499017749983
    PURPOSE: Worldwide advances in microsurgery have made salvaging of amputated hand via replantation and revascularization common procedures. The present study examines the outcome of these procedures in a tertiary hospital in Malaysia.

    METHODS: Patients with hand amputation who underwent replantation or revascularization from 2005 to 2012 were identified and reviewed for patient characteristics, amputation characteristics and survival rates. Successfully treated patients were interviewed to assess the functional outcome using Quick Disability of the Arm, Shoulder and Hand (Quick-DASH) questionnaire and Michigan Hand Outcome Questionnaire (MHQ). Statistical analysis was performed to evaluate outcome and elicit predictive factors.

    RESULTS: Fifty-five patients were enrolled: 37 (67.3%) underwent replantation and 18 (32.7%) underwent revascularization. The overall success rate of 78% ( n = 43) was within the range of previously reported data (61.6% to 96.0%). Ischaemic time <6 h provided significantly better survival rates ( p < 0.05). Functional outcomes were successfully assessed in 34 patients (79%), at a mean follow-up of 40 months (range 11-93 months). The overall Quick-DASH and MHQ scores were 42.82 ± 23.69 and 60.94 ± 12.82, respectively. No previous reports of functional outcome were available for comparison. Both Quick-DASH ( p = 0.001) and MHQ scores ( p < 0.001) were significantly higher for finger injuries, followed by thumb, wrist and palm injuries.

    CONCLUSION: Ischaemic time and level of injury are important predictors of success rate of replantation and revascularization of amputated upper limb appendages.

    Matched MeSH terms: Microsurgery/methods*
  18. Zhao J, Tien HY, Abdullah S, Zhang Z
    Plast Reconstr Surg, 2010 Dec;126(6):2052-2059.
    PMID: 21124145 DOI: 10.1097/PRS.0b013e3181f44994
    BACKGROUND: Second toe-to-thumb transfer is a good alternative to using the great toe for reconstruction of the thumb. It achieves excellent function and reduces morbidity to the donor foot. However, cosmesis is often poor. The second toe has three unattractive features, a narrow "neck," a bulbous tip, and a short nail.

    METHODS: The authors describe a modified second toe transfer that addresses cosmesis in six patients. These include (1) harvesting a flap from the adjacent side of the great toe and insetting it into the volar aspect of the second toe to give more bulk, (2) making skin excisions on each side of the tip to reduce the bulbous appearance, and (3) excising the eponychium to produce apparent lengthening of the nail.

    RESULTS: The mean follow-up period was 18 months (range, 6 to 36 months). The procedure resulted in good function and improved cosmesis in all six cases. Part of the great toe flap was lost in one case. The mean two-point discrimination in the transferred toes was 10.1 mm, with protective sensation present in the flaps. The range of motion of the transferred toe was 14 to 38 degrees at the metatarsophalangeal joint, 16 to 55 degrees at the proximal interphalangeal joints, and 20 to 36 degrees in the distal interphalangeal joints. All patients except one were happy with the appearance of the transferred toe.

    CONCLUSION: This novel approach will allow patients to take advantage of the lower morbidity to the donor site afforded by second toe-to-thumb transfer and provide the patients with a more aesthetic appearance of the new thumb.

    Matched MeSH terms: Microsurgery/methods*
  19. Halim AS, Wan Z
    Clin Anat, 2004 May;17(4):358-9.
    PMID: 15108344
    The combined latissimus dorsi and serratus anterior flap has been employed for large defect reconstruction and has been shown to be reliable. These flaps are based on the subscapular-thoracodorsal vascular pedicle that usually supplies both muscles. In the case reported, serratus anterior possessed an anomalous arterial supply totally independent of the subscapular pedicle. The latissimus dorsi and serratus anterior muscles were used as a combined flap to reconstruct a massive thigh defect. The combined flap required two arterial anastomoses.
    Matched MeSH terms: Microsurgery
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links