Displaying publications 1 - 20 of 81 in total

Abstract:
Sort:
  1. Khayi S, Blin P, Chong TM, Chan KG, Faure D
    Genome Announc, 2018 Apr 26;6(17).
    PMID: 29700139 DOI: 10.1128/genomeA.00233-18
    Dickeya solani species are emerging bacterial pathogens of Solanum tuberosum Here, we announce the complete genome sequences of two strains, Dickeya solani D s0432-1 and PPO 9019. Strain PPO 9019 represents the first described member of the genus Dickeya with an extrachromosomal genetic element.
    Matched MeSH terms: Solanum tuberosum
  2. Kadiri M, Sevugapperumal N, Nallusamy S, Ragunathan J, Ganesan MV, Alfarraj S, et al.
    Microbiol Res, 2023 Mar;268:127277.
    PMID: 36577205 DOI: 10.1016/j.micres.2022.127277
    Management of late blight of potato incited by Phytophthora infestans remains a major challenge. Coevolution of pathogen with resistant strains and the rise of fungicide resistance have made it more challenging to prevent the spread of P. infestans. Here, the anti-oomycete potential of Bacillus velezensis VB7 against P. infestans through pan-genome analysis and molecular docking were explored. The Biocontrol potential of VB7 against P. infestans was assessed using a confrontational assay. The biomolecules from the inhibition zone were identified and subjected to in silico analysis against P. infestans target proteins. Nucleotide sequences for 54 B. velezensis strains from different geographical locations were used for pan-genome analysis. The confrontational assay revealed the anti-oomycetes potential of VB7 against P. infestans. Molecular docking confirmed that the penicillamine disulfide had the maximum binding energy with eight effector proteins of P. infestans. Besides, scanning electron microscopic observations of P. infestans interaction with VB7 revealed structural changes in hypha and sporangia. Pan-genome analysis between 54 strains of B. velezensis confirmed that the core genome had 2226 genes, and it has an open pan-genome. The present study confirmed the anti-oomycete potential of B. velezensis VB7 against P. infestans and paved the way to explore the genetic potential of VB7.
    Matched MeSH terms: Solanum tuberosum*
  3. Fardi Z, Shahbeik H, Nosrati M, Motamedian E, Tabatabaei M, Aghbashlo M
    Environ Res, 2024 Feb 01;242:117614.
    PMID: 37996005 DOI: 10.1016/j.envres.2023.117614
    Waste-to-energy conversion presents a pivotal strategy for mitigating the energy crisis and curbing environmental pollution. Pyrolysis is a widely embraced thermochemical approach for transforming waste into valuable energy resources. This study delves into the co-pyrolysis of terrestrial biomass (potato peel) and marine biomass (Sargassum angastifolium) to optimize the quantity and quality of the resultant bio-oil and biochar. Initially, thermogravimetric analysis was conducted at varying heating rates (5, 20, and 50 °C/min) to elucidate the thermal degradation behavior of individual samples. Subsequently, comprehensive analyses employing FTIR, XRD, XRF, BET, FE-SEM, and GC-MS were employed to assess the composition and morphology of pyrolysis products. Results demonstrated an augmented bio-oil yield in mixed samples, with the highest yield of 27.1 wt% attained in a composition comprising 75% potato peel and 25% Sargassum angastifolium. As confirmed by GC-MS analysis, mixed samples exhibited reduced acidity, particularly evident in the bio-oil produced from a 75% Sargassum angastifolium blend, which exhibited approximately half the original acidity. FTIR analysis revealed key functional groups on the biochar surface, including O-H, CO, and C-O moieties. XRD and XRF analyses indicated the presence of alkali and alkaline earth metals in the biochar, while BET analysis showed a surface area ranging from 0.64 to 1.60 m2/g. The favorable characteristics of the products highlight the efficacy and cost-effectiveness of co-pyrolyzing terrestrial and marine biomass for the generation of biofuels and value-added commodities.
    Matched MeSH terms: Solanum tuberosum*
  4. Chan KG, Kher HL, Chang CY, Yin WF, Tan KH
    Genome Announc, 2015;3(2).
    PMID: 25792063 DOI: 10.1128/genomeA.00145-15
    Dickeya chrysanthemi is well known as a plant pathogen that caused major blackleg in the European potato industry in the 1990s. D. chrysanthemi strain L11 was discovered in a recreational lake in Malaysia. Here, we present its draft genome sequence.
    Matched MeSH terms: Solanum tuberosum
  5. Ismail, N.A, Noranizan, M.A., Shamsudin, R., Karim, R
    MyJurnal
    Cassava chips that exist in the current market have no standardisation and cannot be stacked
    nicely into cylindrical container. The objectives of this work are to determine the different dimension of cassava chips produced with different thickness and to develop stackable chips during mass production. Fresh cassava tubers were harvested, washed, peeled and sliced. The thickness measurements used were 1.0 mm, 1.5 mm, 1.75 mm and 2.0 mm and 1.27 mm thickness was measured from commercial potato chips as a controlled sample. Then, it was fried in deep fat fryer with the temperature of 170°C. For each thickness studied, different
    numbers of slice (10, 20, 30 and 40 slices) were fried simultaneously. Results showed that there
    are 6 shapes of fried chips produced during the frying. To conclude, thickness of the slice and
    number of slices fried simultaneously give impact towards the shape of fried chip.
    Matched MeSH terms: Solanum tuberosum
  6. Kamarudin SA, Jinap S, Sukor R, Foo SP, Sanny M
    Malays J Med Sci, 2018 Sep;25(5):128-139.
    PMID: 30914869 MyJurnal DOI: 10.21315/mjms2018.25.5.12
    Background: This study attempted to evaluate the effect of fat-soluble anti-oxidants in vegetable oils on acrylamide during the deep-fat frying of French fries.

    Methods: Three vegetable oils with different fat-soluble anti-oxidant contents were selected and par-fried potato strips were fried in these oils. Acrylamide in the French fries at different frying times (at 180 °C) and over 10 consecutive frying sessions were measured. The anti-oxidant contents and quality degradation of oils were monitored before and after the 5th and 10th consecutive frying sessions.

    Results: The effect of the fat-soluble anti-oxidants in red palm oil on the acrylamide was more apparent when a prolonged frying time was used for consecutive frying sessions than when different frying conditions were used. Using red palm oil, acrylamide concentration in French fries significantly dropped to the lowest level, at 524 ng g-1, after the 10th frying session. The β-carotene content after the 10th frying session was the highest in red palm oil.

    Conclusion: The use of red palm oil for deep-fat frying French fries can be a mitigation strategy to reduce acrylamide formation, but further studies are necessary to investigate the influence of different types of fat-soluble anti-oxidants on the inhibition of acrylamide formation.

    Matched MeSH terms: Solanum tuberosum
  7. Rajisha KR, Maria HJ, Pothan LA, Ahmad Z, Thomas S
    Int J Biol Macromol, 2014 Jun;67:147-53.
    PMID: 24657376 DOI: 10.1016/j.ijbiomac.2014.03.013
    Potato starch nanocrystals were found to serve as an effective reinforcing agent for natural rubber (NR). Starch nanocrystals were obtained by the sulfuric acid hydrolysis of potato starch granules. After mixing the latex and the starch nanocrystals, the resulting aqueous suspension was cast into film by solvent evaporation method. The composite samples were successfully prepared by varying filler loadings, using a colloidal suspension of starch nanocrystals and NR latex. The morphology of the nanocomposite prepared was analyzed by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). FESEM analysis revealed the size and shape of the crystal and their homogeneous dispersion in the composites. The crystallinity of the nanocomposites was studied using XRD analysis which indicated an overall increase in crystallinity with filler content. The mechanical properties of the nanocomposites such as stress-strain behavior, tensile strength, tensile modulus and elongation at break were measured according to ASTM standards. The tensile strength and modulus of the composites were found to improve tremendously with increasing nanocrystal content. This dramatic increase observed can be attributed to the formation of starch nanocrystal network. This network immobilizes the polymer chains leading to an increase in the modulus and other mechanical properties.
    Matched MeSH terms: Solanum tuberosum/chemistry
  8. Sanny M, Jinap S, Bakker EJ, van Boekel MA, Luning PA
    Food Chem, 2012 May 1;132(1):134-43.
    PMID: 26434272 DOI: 10.1016/j.foodchem.2011.10.044
    Acrylamide is a probable human carcinogen, and its presence in a range of fried and oven-cooked foods has raised considerable health concern world-wide. Dietary intake studies observed significant variations in acrylamide concentrations, which complicate risk assessment and the establishment of effective control measures. The objective of this study was to obtain an insight into the actual variation in acrylamide concentrations in French fries prepared under typical conditions in a food service establishment (FSE). Besides acrylamide, frying time, frying temperature, and reducing sugars were measured and the actual practices at receiving, thawing and frying during French fries preparation were observed and recorded. The variation in the actual frying temperature contributed most to the variation in acrylamide concentrations, followed by the variation in actual frying time; no obvious effect of reducing sugars was found. The lack of standardised control of frying temperature and frying time (due to inadequate frying equipment) and the variable practices of food handlers seem to contribute most to the large variation and high acrylamide concentrations in French fries prepared in a restaurant type of FSE as compared to chain fast-food services, and institutional caterers. The obtained insights in this study can be used to develop dedicated control measures in FSE, which may contribute to a sustainable reduction in the acrylamide intake.
    Matched MeSH terms: Solanum tuberosum/chemistry*
  9. Li S, Li C, Yang Y, He X, Zhang B, Fu X, et al.
    Food Chem, 2019 Jun 15;283:437-444.
    PMID: 30722895 DOI: 10.1016/j.foodchem.2019.01.020
    The present study aimed at investigating the effects of octenylsuccinylation and particle size on the emulsifying properties of starch granules as Pickering emulsifiers. Starch spherulites (1-5 μm), native rice starch (5-10 μm), waxy maize starch (10-20 μm) and waxy potato starch (20-30 μm) were modified with octenylsuccinic anhydride. Results showed that octenylsuccinylation caused a significant increase in the contact angle, and there was a weak positive linear correlation with the emulsifying capacity of the starch granules. After octenylsuccinylation, smaller particles of octenylsuccinate-starch granules exhibited better emulsifying properties with smaller droplet size and lower creaming index. Overall, both octenylsuccinylation and particle size have important effects on the emulsifying properties of starch granules as Pickering stabilizers. This study could be useful in the design and development of starch-based Pickering emulsifiers, and provide potential applications in the food and pharmaceutical industries.
    Matched MeSH terms: Solanum tuberosum/metabolism
  10. Ibrahim NUA, Abd Aziz S, Hashim N, Jamaludin D, Khaled AY
    J Food Sci, 2019 Apr;84(4):792-797.
    PMID: 30861127 DOI: 10.1111/1750-3841.14436
    Total polar compounds (TPC) and free fatty acids (FFA) are important indicators in evaluating the quality of frying oil. Conventional methods to determine TPC and FFA are often time consuming, involved laboratory analyses which required skilled personnel and used substantial amount of harmful solvent. In this study, dielectric spectroscopy technique was used to investigate the relation between dielectric property of refined, bleached and deodorized palm olein (RBDPO) during deep frying with TPC and FFA. In total, 150 batches of French fries were intermittently fried at 185 ± 5 °C for 7 hr a day over 5 consecutive days. A total of 30 frying oil samples were collected. The dielectric property of frying oil samples were measured using impedance analyzer with frequencies ranging from 100 Hz to 10 MHz. The TPC of frying oil samples were measured with a Testo 270, while the FFA analysis was done using Malaysian Palm Oil Board (MPOB) test method. Results showed that dielectric constant, TPC and FFA of RBDPO increased as the frying time increased. Dielectric constant increased from 3.09 to 3.17, while TPC and FFA increased from 9.96 to 19.52 and from 0.08% to 0.36%, respectively. Partial least square (PLS) analysis produced good prediction of TPC and FFA with the application of genetic algorithm (GA). Model developed for prediction of TPC and FFA yielded highly significant correlation with R2 of 0.91 and 0.95, respectively and both had root mean square error in cross-validation (RMSECV) of 1.06%. This study demonstrates the potential of dielectric spectroscopy in monitoring palm olein degradation during frying. PRACTICAL APPLICATION: The application of dielectric spectroscopy to detect degradation of palm olein during frying was studied. The dielectric property of palm olein during frying has successfully correlated with TPC and FFA. The model developed in this study could be used for the development of a sensing system for palm olein degradation monitoring.
    Matched MeSH terms: Solanum tuberosum/chemistry
  11. Omar MN, Nor NN, Idris NA
    Pak J Biol Sci, 2007 Apr 01;10(7):1044-9.
    PMID: 19070048
    Changes of aroma constituents of palm olein and selected oils after frying French fries have been studied. The aroma constituents of used oils were collected using a solid-phase microextraction (SPME) headspace technique with an absorbent of a divinylbenzene/carboxen (DVB/CAR) (50/30 microm) on polydimethylsiloxane (PDMS) fibre. The extracted volatiles were desorbed from the fibre in the injection port of the gas chromatograph at 250 degrees C and the aroma constituents were identified by GC-MS. Analytical data showed that volatile constituents of palm olein, soybean oil, corn oil and sunflower oil changed while frying continued from 2 to 40 h, respectively. In palm olein, the 2t,4t-decadienal content decreased from 14.7 to 5.5 microg g(-1) (40 h) whilst hexanal increased from 7.9 microg g(-1) (2 h) to 29.2 microg g(-1) (40 h), respectively. Similar result was also obtained from soybean oil after frying French fries. The 2t,4t-decadienal content decreased from 15.9 microg g(-1) (2 h) to 3.2 microg g(-1) after 40 h frying whilst hexanal increased from 10.2 microg g(-1) (2 h) to 34.2 microg g(-1) (40 h). Meanwhile, in corn oil, it was found that 2t,4t-decadienal decreased from 15.6 microg g(-1) (2 h) to 3.2 microg g(-1) (40 h) whilst hexanal increased from 11.3 microg g(-1) (2 h) to 33.8 microg g(-1) when frying time reached 40 h. In sunflower oil, it was found that 2t,4t-decadienal, decreased from 16.8 microg g(-1) (2 h) to 1.2 microg g(-1) (40 h) while hexanal increased from 9.5 microg g(-1) (2 h) to 32.4 microg g(-1) when frying time reached 40 h. It also showed that used oils exhibited off-odour characteristics due to the increasing amount ofhexanal while their freshness characteristics diminished due to the decreasing amount of 2t, 4t-decadienal.
    Matched MeSH terms: Solanum tuberosum/chemistry*
  12. Lasekan O, Dabaj F
    Foods, 2020 Aug 17;9(8).
    PMID: 32824398 DOI: 10.3390/foods9081129
    The key aroma constituents in the volatile fractions isolated FROM two differently processed fry breads by solvent-assisted flavor evaporation were characterized by an aroma extract dilution analysis (AEDA). Twenty-two compounds were identified with flavor dilution (FD) factor ranges of 2-516. Among them, 13 compounds (FD ≥ 16) were quantified by stable isotope dilution assays and analyzed by odor activity values (OAVs). Of these, 11 compounds had OAVs ≥ 1, and the highest concentrations were determined for δ-decalactone and 2,3-butanedione. Two recombination models of the fry breads showed similarity to the corresponding fry breads. Omission tests confirmed that aroma-active constituents, such as δ-decalactone (oily/peach), 2-acetyl-1-pyrroline (roasty/popcorn-like), 3-methylbutanal (malty), methional (baked potato-like), 2,3-butanedione (buttery), phenyl acetaldehyde (flowery), (E,E)-2,4-decadienal (deep-fried), butanoic acid, and 3-methylbutanoic acid, were the key aroma constituents of fry bread. In addition, 3-methoxy-4-vinylphenol (smoky) and 4-hydroxy-2,5-dimethyl-3(2H)-furanone were also identified as important aroma constituents of fry bread.
    Matched MeSH terms: Solanum tuberosum
  13. Nur Syahira Mohammad, Zaidah Zainal Ariffin
    Science Letters, 2020;14(2):15-23.
    MyJurnal
    Fungi is known to produce a wide range of biologically active metabolites and enzymes. Enzymes produced by fungi are utilized in food and pharmaceutical industries because of their rich enzymatic profile. Filamentous fungi are particularly interesting due to their high production of extracellular enzymes which has a large industrial potential. The aim of this study is to isolate potential soil fungi species that are able to produce functional enzymes for industries. Five Aspergillus species were successfully isolated from antibiotic overexposed soil (GPS coordinate of N3.093219 E101.40269) by standard microbiological method. The isolated fungi were identified via morphological observations and molecular tools; polymerase chain reactions, ITS 1 (5’- TCC GTA GGT GAA CCT GCG G3’) forward primer and ITS 4 (5’-TCC TCC GCT TAT TGA TAT GC-3’) reverse primer. The isolated fungi were identified as Aspergillus sydowii strain SCAU066, Aspergillus tamarii isolate TN-7, Aspergillus candidus strain KUFA 0062, Aspergillus versicolor isolate BAB-6580, and Aspergillus protuberus strain KAS 6024. Supernatant obtained via submerged fermentation of the isolated fungi in potato dextrose broth (PDB) and extracted via centrifugation was loaded onto specific media to screen for the production of xylanolytic, cellulolytic and amylolytic enzymes. The present findings indicate that Aspergillus sydowii strain SCAU066 and Aspergillus versicolor isolate BAB-6580 have great potential as an alternative source of xylanolytic, cellulolytic and amylolytic enzymes.
    Matched MeSH terms: Solanum tuberosum
  14. Goh JE, Rahman AY, Hari R, Lim MP, Najimudin N, Yap WS, et al.
    Microbiol Resour Announc, 2020 May 21;9(21).
    PMID: 32439681 DOI: 10.1128/MRA.01485-19
    A type strain of Lactarius deliciosus was obtained from the CBS-KNAW culture collection. The mycelium was cultured using potato dextrose agar, and the extracted genomic DNA was subjected to PacBio genome sequencing. Upon assembly and annotation, the genome size was estimated to be 54 Mbp, with 12,753 genes.
    Matched MeSH terms: Solanum tuberosum
  15. NUR ELIA NADHIRA MOHD ASMADI, WONG KAH YIN, NUR HADINA SALEH, NURUL FAZIHA IBRAHIM, SUHAIZAN LOB
    MyJurnal
    Black spot disease is a significant worldwide disease on the rose plant. Due to this infection, the leaves become yellow and eventually fall off. The occurrence of this disease has become a major problem, especially in landscape purpose. Therefore, this research was conducted to isolate fungal species from black spot disease in rose and identify using morphological characteristics. Then, all the isolates were tested for pathogenicity to confirm Koch’s postulates. In this study, four fungal isolates have been successfully isolated from black spot disease in rose namely Rhizoctonia sp. (one isolate), Colletotrichum sp. (two isolates) and Penicillium sp. (one isolate). Based on pathogenicity test result using potato dextrose agar (PDA) plug technique, fungus UMTT27R (Penicillium sp.) showed highly pathogenic on rose’s leaves with disease severity (DS) = 88.89% followed by UMTT13R (Colletotrichum sp.) with DS=72.22%, UMTT21R (Colletotrichum sp.) with DS=66.67% and UMTT4R (Rhizoctonia sp.) with DS=61.11%. Correct identification of fungal pathogens is very important to strategize a proper method to control the black spot disease in rose cultivation. 
    Matched MeSH terms: Solanum tuberosum
  16. Muthia, D., Nurul, H., Noryati, I.
    MyJurnal
    This study evaluated the effects of different flours (tapioca, wheat, sago and potato) on the physicochemical properties of duck sausage. The examined physicochemical properties included proximate composition, cooking yield, color (lightness, redness and yellowness), folding, texture profile (hardness, elasticity, cohesiveness, gumminess and chewiness) and sensory properties. The study found that different flours have no effect on the cooking yield of duck sausage. The tapioca formulation showed a mid-range lightness value, folding score and textural properties. Duck sausages made with wheat flour had higher protein content and lightness value and a harder texture. Sausages made with potato flour had a darker color, the lowest folding scores and a softer texture. The addition of sago flour resulted in a higher folding score, greater elasticity and increased overall acceptability of sausage due to higher scores for texture and juiciness. These results show that the properties of duck sausage are influenced by the type of flour used.
    Matched MeSH terms: Solanum tuberosum
  17. Alireza, S., Tan, C.P., Hamed, M., Che Man, Y.B.
    MyJurnal
    The main objective of the present study was to investigate the effects of the frying media and storage time on the fatty acid composition (FAC) and iodine value (IV) of deep-fat fried potato chips. The frying experiment was conducted at 180ºC for five consecutive days. Six frying media were considered as the main treatments: refined, bleached, deodorized (RBD) palm olein (A), canola oil (C), RBD palm olein/sesame oil (AB, 1:1 w/w), RBD palm olein/canola oil (AC, 1:1, w/w), sesame oil/canola oil (BC, 1:1, w/w), and RBD palm olein/sesame oil/canola oil (ABC, 1:1:1, w/w/w). The initial degrees of unsaturation of the consumed oils, A, C, AB, AC, BC, and ABC, were 58.6, 94.0, 68.0, 72.2, 87.7, and 75.8 (g/100 g), respectively. The fatty acid analysis showed that there was a decrease in both the linolenic acid (C18:3) and linoleic acid (C18:2) contents, whereas the palmitic acid (C16:0) increased with a prolonged frying time. The chemical analysis showed that there was a significant (p < 0.05) difference in terms of the IV for each frying oil during the five consecutive days of frying (day 0 to 5). Oil C had the least stability in terms of deep-fat frying due to a high level of unsaturated fatty acids. Conversely, oil AC had the best stability due to the smallest reduction of the C18:2/C16:0 ratio and the IV.
    Matched MeSH terms: Solanum tuberosum
  18. Teoh LS, Lasekan O, Adzahan NM, Hashim N
    J Food Sci Technol, 2016 Jul;53(7):3035-3042.
    PMID: 27765974
    In this work, potato slices were exposed to different doses of UV-C irradiation (i.e. 2.28, 6.84, 11.41, and 13.68 kJ m(-2)) with or without pretreatment [i.e. ascorbic acid and calcium chloride (AACCl) dip] and stored at 4 ± 1 °C. Changes in enzymatic activities of polyphenol oxidase (PPO), peroxidase (POD) and phenylalanine ammonia lyase (PAL), as well as total phenolic content (TPC) were investigated after 0, 3, 7 and 10 days of storage. Results showed that untreated and UV-C treated potato slices at 13.68 kJ m(-2) dosage level showed significantly higher PPO, POD and PAL activities. Conversely, untreated potato slices showed the lowest TPC during storage period. Potato slices subjected to AACCl dip plus UV-C at 6.84 kJ m(-2) produced lower PPO, POD and PAL activities, as well as maintained a high TPC during storage.
    Matched MeSH terms: Solanum tuberosum
  19. Sue Shan, L., Sulaiman, R., Sanny, M., Nur Hanani, Z.A.
    MyJurnal
    The aim of this study was to evaluate the effect of barrel temperature and flour types on the residence time and physical properties of various flour extrudates. Corn flour, rice flour, corn flour with potato starch (30% w/w, d.b), and rice flour with potato starch (30%w/w, d.b) were extruded at screw speed of 75rpm, feed moisture at 25% (w/w, w.b.), barrel temperature ranging from 80°C to 140°C and die size of 1.88mm. The extrudates were dried at 50°C overnight and further analysed. Results showed that an increase in extruder barrel temperature decreased the residence time of the flours in the extruder (from 4.11-11.32min to 2.24-6.76min), but increased the expansion ratio, rehydration ratio, water absorption index, water solubility index and b value of the extrudate (p≤0.05). The extrudates had the mean residence time and physical properties of rice flour
    Matched MeSH terms: Solanum tuberosum
  20. Azimah, R., Azrina, A., Khoo, H.E.
    MyJurnal
    The aim of this study was to determine hydrolytic stability [acid value (AV)] and oxidative stability [peroxide value (PV) and conjugated dienes (CD)] of selected blended oils during potato frying. The blended oils were prepared by blending palm oil with corn oil (POCO), sesame oil (POSO) and rice bran oil (PORBO). Blended vegetable oils were prepared in a ratio of 1 to 1 (v/v) and tested for 0, 10 and 20 times after frying potato. AV and PV were determined by titration method, while CD was determined using the spectrophotometric method. Increasing frequency of oil frying contributed to increased level of AV in all blended oils. PVs were increased in all samples, with most noticeable increment observed in POSO, followed by PORBO and POCO. CD levels of the blended oils were also increased after 20 times of potato frying compared with the unused oil and after 10 times of frying. POCO was the most stable oil in terms of hydrolytic and oxidative stabilities. It is most suitable for deep-fat frying of potato chips and industrial application.
    Matched MeSH terms: Solanum tuberosum
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links