Browse publications by year: 2018

  1. Khoo LW, Foong Kow AS, Maulidiani M, Lee MT, Tan CP, Shaari K, et al.
    Molecules, 2018 Aug 29;23(9).
    PMID: 30158427 DOI: 10.3390/molecules23092172
    The present study aims for the first time to provide the in vivo acute toxicological profile of the highest dose of Clinacanthus nutans (Burm. f.) Lindau water leaf extract according to the Organization for economic co-operation and development (OECD) 423 guidelines through conventional toxicity and advanced proton nuclear magnetic resonance (¹H-NMR) serum and urinary metabolomics evaluation methods. A single dose of 5000 mg/kg bw of C. nutans water extract was administered to Sprague Dawley rats, and they were observed for 14 days. Conventional toxicity evaluation methods (physical observation, body and organ weight, food and water consumption, hematology, biochemical testing and histopathological analysis) suggested no abnormal toxicity signs. Serum ¹H-NMR metabolome revealed no significant metabolic difference between untreated and treated groups. Urinary ¹H-NMR analysis, on the other hand, revealed alteration in carbohydrate metabolism, energy metabolism and amino acid metabolism in extract-treated rats after 2 h of extract administration, but the metabolic expression collected after 24 h and at Day 5, Day 10 and Day 15 indicated that the extract-treated rats did not accumulate any toxicity biomarkers. Importantly, the outcomes further suggest that single oral administration of up to 5000 mg/kg bw of C. nutans water leaf extract is safe for consumption.
    MeSH terms: Animals; Blood Chemical Analysis; Dose-Response Relationship, Drug; Energy Metabolism/drug effects; Male; Plant Extracts/administration & dosage; Plant Extracts/toxicity*; Plant Extracts/chemistry; Urine/chemistry; Rats, Sprague-Dawley; Plant Leaves/chemistry; Toxicity Tests, Acute/methods*; Acanthaceae/chemistry*; Carbohydrate Metabolism/drug effects; Rats; Metabolomics/methods*; Proton Magnetic Resonance Spectroscopy
  2. Choe WS, Kwang Ng B, Atan IK, Lim PS
    Obstet Gynecol Int, 2018;2018:5971795.
    PMID: 30158981 DOI: 10.1155/2018/5971795
    Background: Urinary retention and voiding dysfunction is a distressing event and relatively common in immediate postpartum period. This study aims at investigating the range of postvoid residual urine volume after vaginal delivery and its association with various obstetric parameters.

    Methods: This was a prospective observational study of women who delivered vaginally in Universiti Kebangsaan Malaysia Medical Centre from March 2017 to September 2017. Those who were able to void within 6 hours after delivery, the voided volume measurements were taken at their second void followed by measurement of residual urine using a transabdominal ultrasound scan. For those unable to void at 6 hours postpartum, the bladder volume was measured. If the bladder volume was 500 ml or more, an indwelling catheter would be inserted and kept for 24 hours.

    Results: A total of 155 patients who fulfilled the inclusion were recruited. There were 143 (92.3%) patients who had residual urine volume of less than 150 ml at second void. Out of these 143 patients, 138 (96.5%) had residual urine volume of less than 100 ml, and among the 138 patients, 119 (86.2%) had residual urine volume of less than 50 ml. The median residual urine volume was 10 ml (2, 42). The overall rate of postpartum urinary retention (PPUR) was 7.7%; 6 (3.85%) had overt retention and 6 (3.85%) had covert retention. Primiparity, duration of active phase of labour, duration of second stage of labour, epidural analgesia, episiotomy, instrumental delivery, and perineal pain score were independent risk factors associated with postpartum urinary retention.

    Conclusion: Postpartum urinary retention complicates approximately 7.7% of vaginal deliveries. Majority (86.2%) of them had residual urine volume less than 50 ml. Obstetrics factors independently associated with PPUR include primiparity, duration of active phase of labour, duration of second stage of labour, epidural analgesia, episiotomy, instrumental delivery, and degree of perineal pain.

  3. Md Noh MSF, Bahari N
    Oxf Med Case Reports, 2018 Sep;2018(9):omy065.
    PMID: 30159156 DOI: 10.1093/omcr/omy065
  4. Khalil A, Ng SC, Liew YM, Lai KW
    Cardiol Res Pract, 2018;2018:1437125.
    PMID: 30159169 DOI: 10.1155/2018/1437125
    Image registration has been used for a wide variety of tasks within cardiovascular imaging. This study aims to provide an overview of the existing image registration methods to assist researchers and impart valuable resource for studying the existing methods or developing new methods and evaluation strategies for cardiac image registration. For the cardiac diagnosis and treatment strategy, image registration and fusion can provide complementary information to the physician by using the integrated image from these two modalities. This review also contains a description of various imaging techniques to provide an appreciation of the problems associated with implementing image registration, particularly for cardiac pathology intervention and treatments.
  5. Lim SS, Kim BH, Li D, Feng Y, Daud WRW, Scott K, et al.
    Front Chem, 2018;6:318.
    PMID: 30159306 DOI: 10.3389/fchem.2018.00318
    Understanding the mechanism of electron transfer between the cathode and microorganisms in cathode biofilms in microbial electrolysis cells (MECs) for hydrogen production is important. In this study, biocathodes of MECs were successfully re-enriched and subjected to different operating parameters: applied potential, sulfate use and inorganic carbon consumption. It was hypothesized that biocathode catalytic activity would be affected by the applied potentials that initiate electron transfer. While inorganic carbon, in the form of bicarbonate, could be a main carbon source for biocathode growth, sulfate could be a terminal electron acceptor and thus reduced to elemental sulfurs. It was found that potentials more negative than -0.8 V (vs. standard hydrogen electrode) were required for hydrogen production by the biocathode. In additional, a maximum hydrogen production was observed at sulfate and bicarbonate concentrations of 288 and 610 mg/L respectively. Organic carbons were found in the cathode effluents, suggesting that microbial interactions probably happen between acetogens and sulfate reducing bacteria (SRB). The hydrogen-producing biocathode was sulfate-dependent and hydrogen production could be inhibited by excessive sulfate because more energy was directed to reduce sulfate (E°


    SO


    4


    2
    -


    /H2S = -0.35 V) than proton (E° H+/H2 = -0.41 V). This resulted in a restriction to the hydrogen production when sulfate concentration was high. Domestic wastewaters contain low amounts of organic compounds and sulfate would be a better medium to enrich and maintain a hydrogen-producing biocathode dominated by SRB. Besides the risks of limited mass transport and precipitation caused by low potential, methane contamination in the hydrogen-rich environment was inevitable in the biocathode after long term operation due to methanogenic activities.
  6. Bergin PS, Brockington A, Jayabal J, Scott S, Litchfield R, Roberts L, et al.
    Epilepsia, 2018 10;59 Suppl 2:144-149.
    PMID: 30159885 DOI: 10.1111/epi.14478
    The EpiNet project has been commenced to facilitate investigator-led collaborative research in epilepsy. A new Web-based data collection tool has been developed within EpiNet to record comprehensive data regarding status epilepticus and has been used for a study of status epilepticus in Auckland, New Zealand. All patients aged >4 weeks who presented to any of the five public hospitals and the major private hospital within Auckland city (population = 1.61 million) with an episode of status epilepticus between April 6, 2015 and April 5, 2016 were identified using multiple overlapping sources of information. For this study, status epilepticus was defined as any seizure exceeding 10 minutes in duration, or repeated seizures lasting >10 minutes without recovery between seizures. Patients who had either convulsive or nonconvulsive status epilepticus were included. Episodes of status epilepticus were classified according to the 2015 International League Against Epilepsy ILAE status epilepticus classification. A total of 477 episodes in 367 patients were considered as definite or probable status epilepticus; 285 episodes (62%) lasted >30 minutes, which is the duration that has previously been used for epidemiological studies of status epilepticus.
    MeSH terms: Adolescent; Child; Child, Preschool; Female; Hospitalization/statistics & numerical data; Humans; Infant; Male; New Zealand/epidemiology; Retrospective Studies; Status Epilepticus/diagnosis; Status Epilepticus/epidemiology*; Status Epilepticus/physiopathology*; Incidence
  7. Shafiq M, Fong AYY, Tai ES, Nang EEK, Wee HL, Adam J, et al.
    Int J Epidemiol, 2018 10 01;47(5):1399-1400g.
    PMID: 30165399 DOI: 10.1093/ije/dyy168
    MeSH terms: Adolescent; Adult; Asia, Southeastern/epidemiology; Cardiovascular Diseases/epidemiology*; Female; Humans; Male; Middle Aged; Cohort Studies; Young Adult
  8. Ong SQ, Ahmad H, Tan EH
    Environ Entomol, 2018 12 07;47(6):1582-1585.
    PMID: 30165432 DOI: 10.1093/ee/nvy127
    Megaselia scalaris (Loew) (Diptera: Phoridae) provides great evidential value in estimating the postmortem interval (PMI) compared with other dipterans due to its common occurrence on human corpses both indoors and in concealed environments. Studies have focused on the effect of temperature, larval diet, and photoperiod on the development of the species; however, knowledge of M. scalaris development at different moisture levels is insufficient. This study aimed to investigate the effects of substrate moisture on the larval development time, pupal recovery, pupal weight, adult emergence, and adult head width of M. scalaris. The larvae were reared in five replicates on substrates with six moisture levels ranging from 50 to 90%. Larvae and puparia were sampled daily, and the collection time, number, and weight were recorded, measured, and then compared using multivariate analysis of variance with a post hoc least significant difference test. Larvae developed most quickly (3.75 ± 0.04 d) at 50% substrate moisture; the larvae were able to survive in extremely wet substrates (90% moisture), but the development time was significantly longer (6.48 ± 0.19 d). Moisture greatly influenced the pupation rate and adult emergence but showed a weak effect on the pupae weight and adult head width. Due to the significance of moisture on the development of M. scalaris, PMI estimation using M. scalaris with cadavers of different moisture content must be carefully conducted to avoid inaccuracy.
    MeSH terms: Animals; Diptera/growth & development*; Entomology; Female; Larva/growth & development; Male; Water/physiology*; Forensic Sciences
  9. Mak WY, Mak OS, Lee CK, Tang W, Leung WK, Wong MTL, et al.
    J Crohns Colitis, 2018 Nov 28;12(12):1392-1398.
    PMID: 30165543 DOI: 10.1093/ecco-jcc/jjy120
    Background: The presence of perianal fistulas in Crohn's disease [CD] denotes increased disease aggressiveness. We studied the epidemiology and clinical outcomes of perianal CD [PCD] using the Hong Kong territory-wide IBD Registry [HKIBDR].

    Methods: Consecutive patients with PCD were identified from the HKIBDR, and disease characteristics, treatments, and outcomes were analysed. The risks for medical and surgical therapies were assessed using Kaplan-Meier analysis.

    Results: Among 981 patients with CD with 10530 patient-years of follow-up, 283 [28.8%] had perianal involvement, of which 120 [42.4%] were as first presentation. The mean age at diagnosis of PCD was 29.1 years, and 78.8% were male. The median follow-up duration was 106 months (interquartile range [IQR]: 65-161 months]. Perianal fistula [84.8%] and perianal abscess [52.7%] were the two commonest forms. Male, younger age at diagnosis of CD, and penetrating phenotypes were associated with development of PCD in multivariate analysis. Of 242 patients with fistulizing PCD, 70 [29.2%] required ≥5 courses of antibiotics, and 98 [40.5%] had ≥2 surgical procedures. Nine patients required defunctioning surgery and 4 required proctectomy. Eighty-four patients [34.7%] received biologics. Cumulative probabilities for use of biologics were 4.7%, 5.8%, and 8.6% at 12 months, 36 months, and 96 months, respectively, while the probabilities for surgery were 67.2%, 71.6%, and 77.7%, respectively. Five mortalities were recorded, including 2 cases of anal cancer, 2 CD-related complications, and one case of pneumonia.

    Conclusion: Over 40% of CD patients presented with perianal disease at diagnosis. Patients with PCD had poor outcome, with young age of onset, multiple antibiotic use, and repeated surgery.

  10. Fakhriyah Nur Ibrahim, Masni Mat Yusoff, Radhiah Shukri, Mohammad Rashedi Ismail-Fitry
    MyJurnal
    Pork and bovine collagen incorporated into meat products showed promising
    functional properties as food ingredients but has the halal issue. This study
    investigated the effect of incorporating fish collagen hydrolysate (FCH) as a fat replacer
    in buffalo patties in terms of proximate values, texture and colour properties. There
    were five different formulations including a control (10% fat, 0% FCH), A (7.5% fat, 2.5%
    FCH), B (5% fat, 5% FCH), C (2.5% fat, 7.5% FCH), and D (0% fat, 10% FCH). There were
    no significant differences (p>0.05) between all formulations in terms of cooking yield,
    shrinkage, water-holding capacity, and pH value. The sensory test showed no
    significant difference (p>0.05) between all formulations in terms of colour,
    appearance, juiciness, aroma, and overall acceptability, while sample D with 10% FCH
    had significantly lower (p
    MeSH terms: Red Meat; Animals; Buffaloes; Cattle; Collagen; Color; Cooking; Meat Products; Swine; Water; Bison
  11. Noor'Ain Azizan, Seri Rahayu Kamat, Nur Syafiqah Rayme, Ruzy Haryati Hambali
    MyJurnal
    Repetitive movement can lead to the pain muscle, nerves, and tendons that cause by
    repetitive overuse of working task. The muscle will fatigue due to; repetitive
    movement, force that been applied, posture during working and duration of working.
    The stress level during working can influent the energy performance usage during
    working. The aim of this paper is to analyse the influence of heart rate and muscle
    activity of workers in composite manufacturing towards muscle fatigue. The data was
    collected for a worker in hand layup department and the Qualitative method was used
    in a way to investigate the working load and level of pain received by their body. Then,
    the Qualitative data was sorted and the respondent proceeded for a Quantitative
    method which involves muscle activity analysis and heart rate analysis. The tools that
    were used to conduct these experiments were surface electromyography (sEMG),
    Wristwatch with chest strap and perceived stress scale (PSS). The experimentation
    used to calculate the average reading of heart rate and muscle activity during working
    and detect the duration the muscle to start fatigue. Moreover, this paper analysed the
    relationship between heart rate and muscle activity through the duration of working.
    As an overall finding of this research, it was shown that the heart rate of the workers
    influence the muscle activity of workers and has high potential relationship to the
    fatigue of muscles of the workers in the layup department.
    MeSH terms: Electromyography; Heart Rate; Movement; Posture; Surveys and Questionnaires; Reading; Tendons; Muscle Fatigue; Myalgia
  12. Muhammad Adil Khattak, Nurul Syahrizzat Mohd Yasin, Hannah Natasha Andjani, Puteri Nurailah Husna Mohd Tajuddin, Sakeshraj Narajah, See, Zhi Fei, et al.
    MyJurnal
    Geopolitical risks will less affect the oil supply in the United States due to its stability
    and widespread oil sectors since 1970s. Nevertheless, energy prosperity in the United
    States appears differently in relation to a fuller period for conventional energy export
    states where geopolitical challenges have been intensified by monetary pressure and
    escalating energy demand in residential areas. The relationship between the United
    States and other energy export states will continue to change as the United States
    becomes more independent and non-OPEC resources become worthwhile especially
    in Western Hemisphere. With expansion of global economic growth, maintained
    multilateral relationship among countries and technological development are two
    prominent concerns to secure long-term energy supplies and to enable further
    exploration of new energy sources.
    MeSH terms: Industrial Development; Energy-Generating Resources; Environment; Risk; United States; Economic Development
  13. Muhammad Adil Khattak, Mohammad Azfar Haziq Ayoub, Muhammad Ariff Fadhlillah Abdul Manaf, Mohd Faidhi Mahrul, Mohd Ridwan Mohd Juhari, Mira Idora Mustaffa, et al.
    MyJurnal
    Energy supply security is a vital aim of energy policy in countries across the globe.
    Global energy security is one of the main concerns as it depends on the concentrations
    of the energy supplies political pressure from energy exporters. In Europe’s case,
    energy security has been of large concern by the gas crisis which resulted from gas
    prices and debts that caused the halt in Russian gas flowing through Ukraine’s
    pipelines. The crisis coincidentally happened during the increasing concerns in the
    nationalism resource of energy exporters as well as the circumstance involving high oil
    prices. Europe’s economies were a huge concern as it was susceptible of energy
    exporters’ political pressure and the rivalry with the resource demanding China. Energy
    security, however, is still confused as it is shown in political actions. The focus of energy
    security in the U.S. has originally been to reduce the susceptibility of it towards political
    manipulation and that has tipped the politicians to voice out for the independence of
    energy increasing shares of renewable energy. The plan of energy independence in
    Brazil, however, had come to a reality as there were timeframes of politician
    represented a rising share in fossil fuel supply imports and lowered shares of
    renewable energy as to encourage energy security. For other countries, the energy
    security they went for was the protection of the poor in countering the products price
    instability while others highlight the prominence of defending the economy in contrast
    of the disturbance in energy service supplies which is done by letting the prices of
    products to increase in times of shortage. The paper will define the energy security
    better in terms of the European Union as to shed some light on the issue. It will review
    the European Union and the global energy security whilst including the implication of
    oil market which will be concentrated in terms of EU, elaboration of the energy security
    of EU in context of foreign relation, the physical security issues and challenges faced
    by EU, and the elaboration of energy policy of EU.
  14. Talha Ahmed Khan, Muhammad Alam, Kushsairy Kadir, Mazliham, M.S., Zeeshan Shahid
    MyJurnal
    Designing of autonomous navigation is very complex and challenging. The main motive
    of the proposed research was to construct an autonomous robot which has a
    proficiency to move in unpredictable and dynamic environments, and for that reason
    the robot has to sense the environment and lug out the required tasks irrespective of
    any hindrances in its working area. Applications of autonomous mobile robots can
    include espionage, underground mining, military operations, driverless transportation,
    identification of intrusion and protect missions, etc. Several various approaches have
    been critiqued to perform such operability of robot but results proved that the Fuzzy
    logic found to be the best for this kind of robotics operations because it has the
    capability to respond meritoriously to the complex inputs. To refrain and bypass the
    obstacles accurately and to attain the destination under various contour of obstruction
    in surroundings, a fuzzy logic approach has been studied and carried out to advance
    the motion of robot vigorously with less false alarm rate using ‘If-Then’ basic principle
    fuzzy inference norms and defuzzification procedure for the accurate and precise path
    planning and navigation of autonomous robot. The unmanned robot was furnished
    with sensors (ultrasonic HC-SR04) which has the aptitude to detect the scope of
    hindrances on the premise of how close or far the impediment is. To achieve this a
    solitary board PC was utilized, to be specific Raspberry-Pi 2 model b which takes the
    inputs from the sensors and maintain a strategic distance from the snags set in their
    way lastly proceeds onward. Results proved that our designed robot is a cost-effective
    solution performed better than the other techniques.
  15. Micky Vincent, Latifah Suali, Afizul Safwan Azahari, Patricia Rowena Mark Baran, Elexson Nillian, Lesley Maurice Bilung
    MyJurnal
    Yeast growth and biomass production are greatly influenced by the length of the
    incubation period during cultivation. Therefore, this study was conducted to
    investigate the growth kinetics of five Lipomyces starkeyi strains as determined by
    biomass production. The five L. starkeyi strains, namely L. starkeyi ATCC 12659, L.
    starkeyi MV-1, L. starkeyi MV-4, L. starkeyi MV-5 and L. starkeyi MV-8, were inoculated
    in sterilized Yeast Malt broth, and, incubated for 192 hr at ambient temperature.
    Biomass yields were assessed and calculated gravimetrically every 24 hr. Results
    indicated that the optimal biomass production of L. starkeyi ATCC 12659, L. starkeyi
    MV-1, L. starkeyi MV-4, L. starkeyi MV-5 and L. starkeyi MV-8 were at 120, 168, 144,
    168 and 120 hr, with the concentrations of 6.64, 6.43, 9.78, 11.23 and 8.56 g/L,
    respectively. These results indicate that each L. starkeyi strain requires specific
    incubation period for the optimum production of fungal biomass. Therefore, by
    cultivating each L. starkeyi strain at the predetermined incubation period, biomass
    yields could significantly be improved for further downstream applications such as
    single cell protein and lipid production.
    MeSH terms: Kinetics; Lipids; Saccharomyces cerevisiae; Temperature; Yeast, Dried; Biomass; Lipomyces
  16. Nazriah Mahmud, Azli Yahya
    MyJurnal
    Electrical Discharge Machining, EDM is one of the technologies used for surface
    texturing such as the embedded micro-dimples on the metallic acetabular cup. During
    the machining process, changes in the gap distance may lead to load changes from
    open to short circuit. Limiting the load current under short circuit conditions and load
    voltage under open circuit conditions is the requirement in this system. Power supply
    is one of the elements that controls the process parameters which is related to improve
    the machining condition as well as Material Removal Rate (MRR). A considerable
    number of power supply design method were proposed for various EDM application.
    This research proposed a Switch Mode Power Supply method implementing new
    design of Flyback power supply which can stabilize the voltage during open circuit
    condition as well as during discharge condition. Experimental studies were conducted
    to verify the capability of Flyback power supply by machining eight micro-dimples in
    lower position and twelve micro-dimples in upper position, both in circular
    arrangement on metallic acetabular cup. Research conducted shows that the Flyback
    power supply improve the consistency of MRR when compared to Linear power supply.
    This may help to predict the machining time, thus improving the production of microdimples
    in required time.
    MeSH terms: Electricity; Electric Power Supplies; Research; Technology
  17. Asif Hussain Khoja, Azra Nawar, Abeera Ayaz Ansari, Muneeb Qayyum, Sabrina Mohidin Yahya
    MyJurnal
    Bioethanol is one of the leading alternative biofuel to fossil fuels and can be use in
    existing gasoline engines without any major modification. Bioethanol can be
    produced from sugar containing biomass fermentation using different potential
    strains. In this study, the gram negative, facultative anaerobic, rod shaped strain
    ‘Zymomonas mobilis’ was used as microorganism to produce bioethanol from sugar
    cane molasses using anaerobic fermentation. The study was conducted to investigate
    the optimized conditions for production of bioethanol through batch fermentation
    process. The fermentation unit was designed to determine the effect of process
    parameters such as fermentation temperature, pH, sugar concentration and supply of
    nutrients. The Zymomonas mobilis produced 9.3% (v/v) bioethanol by utilizing 16
    g/100mL sugar with the fermentation efficiency 92.5%. The fertilized based nutrients
    were supplied to enhance the production of bioethanol yield. The bioethanol yield
    produced by using this strain in optimized conditions is in good compromise with
    previous study and also compared with commercially available yeast strain.
  18. Azisyahirah Azizan, Haris Ahmad Israr, Mohd Nasir Tamin
    MyJurnal
    Mechanical responses and failure of fiber-reinforced polymer (FRP) composite
    laminates could be predicted using the validated finite element (FE) simulation. The
    material constitutive and damage models employed in the simulation are developed
    based on the properties of the unidirectional lamina, including those obtained
    through tension tests. Such computational model assumes perfectly aligned fibers in
    the lamina. In this respect, this paper examined the effect of fabrication-inherited
    fiber misalignment on the tensile response of the unidirectional lamina. For this
    purpose, a series of tension tests are performed on unidirectional carbon fiberreinforced
    polymer (CFRP) composite lamina specimens with different gage lengths
    ranging from 50 to 150 mm. Fiber misalignment is quantified to be 7o and represents
    the nominal deviation of the fibers from the reference longitudinal axis direction.
    Load-displacement responses of the specimens are compared. Results show that the
    nominal tensile strength of the lamina is 1089±33 MPa. The elastic modulus,
    however, increases from 36.96 to 55.93 GPa as the gage lengths vary from 50 to 150
    mm, respectively. This is due to the induced bending effects on the reinforcing fibers
    that is greater for longer gage lengths. Multiple fiber fracture events, each is depicted
    in a noticeable load drop, are recorded throughout the tensile loading of long lamina
    specimens. Although the load at fracture is accurately reproduced by the FE
    simulation using the damage-based mesoscale model, the effect of fiber
    misalignment could not be captured.
  19. Amos Danladi, Ho, Chin Siong, Ling, Gabriel Hoh Teck
    MyJurnal
    Interest in Indigenous Knowledge (IK) system has been particularly highlighted in
    flood disasters, due to the likely increase of flood events resulting from
    anthropogenic climate change through heavy precipitation, increased catchment
    wetness, and sea level rise. Therefore, bringing IK of flood risk reduction into focus
    and context to deepen the understanding of how people manage their own changing
    circumstances can bring more pertinent information about flood risk reduction. This
    paper reviews the significance of IK in flood risk reduction. Specifically, the paper
    discusses IK flood forecasting, early warning signs, adaptation and coping strategies
    in flood risk reduction around the world. The Methodological approach employed for
    this paper is the review of existing literature on IK in flood Disaster Risk Reduction
    (DRR), and then a summary of the outcomes of the studies reviewed was discussed.
    However, it was deduced from the review undertaken, the need for an intensive
    empirical study to be conducted to explore how efficient these strategies or
    techniques are, in relation to flood risk reduction, which this paper strongly
    recommends for further investigation. Additionally, the paper concludes by
    emphasizing that although the IK of flood risk reduction is embedded in varied
    regions around the globe, still there is a need for further study to be carried out in
    order to unveil why the similarities and variations in flood risk reduction
    practices/strategies between regions.
    MeSH terms: Acclimatization; Adaptation, Psychological; Disasters; Forecasting; Risk Reduction Behavior; Floods; Climate Change
  20. Ismail, A.Y., Noerpamoengkas, A., Zakaria, S.I.F.S.
    MyJurnal
    In this paper, an extensive work on the natural frequency of perforated plate has
    been made by introducing micro-holes on the plate. The micro-holes, which is known
    to have a remarkable performance in several applications, were arranged diagonally
    among the perforated holes in order to make a new combination of micro-macro
    perforated plate. A 3D geometrical model of the plate was made in the Autodesk
    Inventor and the Finite Element (FE) simulation was employed to calculate the
    natural frequency and visualize the mode shape. Four models were made with
    various micro-holes diameter starting from 0,25, 0,5, 0,75 and 0,9 mm, respectively.
    The macro holes diameter, however, was kept constant to be 1,5 mm purposely to
    know the effect of micro holes in particular. The results from the models were then
    compared to a single perforated plate (PP) for clarification. It is found that the micro
    holes gives considerable effect to the perforated plate natural frequency. Similar to
    the author previous findings, the diameter of the micro holes is proportional to the
    natural frequency reduction.
    MeSH terms: Bone Plates; Mathematics; Knowledge; Finite Element Analysis; Inventors
External Links