Affiliations 

  • 1 1 Faculty of Engineering, Department of Chemical and Environmental Engineering, 69861 University of Nottingham Malaysia Campus , Semenyih, Selangor, Malaysia
  • 2 2 Radiation Processing Technology Division, Malaysian Nuclear Agency, Bangi, Selangor, Malaysia
  • 3 3 School of Science & Technology, Research Centre for Nano-materials & Energy Technology, 65189 Sunway University , Subang Jaya, Selangor, Malaysia
  • 4 4 Energy Research Division, 65214 Taylor's University , Lakeside Campus, Subang Jaya, Selangor, Malaysia
J Biomater Appl, 2018 03;32(8):1049-1062.
PMID: 29298552 DOI: 10.1177/0885328217750476

Abstract

The effect of electron beam radiation on ethylene-propylene diene terpolymer/polypropylene blends is studied as an attempt to develop radiation sterilizable polypropylene/ethylene-propylene diene terpolymer blends suitable for medical devices. The polypropylene/ethylene-propylene diene terpolymer blends with mixing ratios of 80/20, 50/50, 20/80 were prepared in an internal mixer at 165°C and a rotor speed of 50 rpm/min followed by compression molding. The blends and the individual components were radiated using 3.0 MeV electron beam accelerator at doses ranging from 0 to 100 kGy in air and room temperature. All the samples were tested for tensile strength, elongation at break, hardness, impact strength, and morphological properties. After exposing to 25 and 100 kGy radiation doses, 50% PP blend was selected for in vivo studies. Results revealed that radiation-induced crosslinking is dominating in EPDM dominant blends, while radiation-induced degradation is prevailing in PP dominant blends. The 20% PP blend was found to be most compatible for 20-60 kGy radiation sterilization. The retention in impact strength with enhanced tensile strength of 20% PP blend at 20-60 kGy believed to be associated with increased compatibility between PP and EPDM along with the radiation-induced crosslinking. The scanning electron micrographs of the fracture surfaces of the PP/EPDM blends showed evidences consistent with the above contentation. The in vivo studies provide an instinct that the radiated blends are safe to be used for healthcare devices.

* Title and MeSH Headings from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.