MyMedR

Displaying publications 1 - 20 of 95 in total

Abstract:

Sort:

Fulltext Evaluation of selected tropical marine microalgal cultures for use in biophotovoltaic platforms

Tay ZH, Ng FL, Thong CH, Lee CW, Gnana Kumar G, Al-Sehemi AG, et al.

Appl Microbiol Biotechnol, 2024 Dec;108(1):1-14.
PMID: 38194143 DOI: 10.1007/s00253-023-12951-0

In this study, the bioelectrical power generation potential of four tropical marine microalgal strains native to Malaysia was investigated using BPV platforms. Chlorella UMACC 258 produced the highest power density (0.108 mW m-2), followed by Halamphora subtropica UMACC 370 (0.090 mW m-2), Synechococcus UMACC 371 (0.065 mW m-2) and Parachlorella UMACC 245 (0.017 mW m-2). The chlorophyll-a (chl-a) content was examined to have a linear positive relationship with the power density (p
Fulltext Green synthesis of reduced graphene oxide by using tropical microalgae and its application in biophotovoltaic devices

Tee JY, Ng FL, Keng FS, Lee CW, Zhang B, Lin S, et al.

iScience, 2024 Apr 19;27(4):109564.
PMID: 38617563 DOI: 10.1016/j.isci.2024.109564

The successful commercialization of algal biophotovoltaics (BPV) technology hinges upon a multifaceted approach, encompassing factors such as the development of a cost-efficient and highly conductive anode material. To address this issue, we developed an environmentally benign method of producing reduced graphene oxide (rGO), using concentrated Chlorella sp. UMACC 313 suspensions as the reducing agent. The produced rGO was subsequently coated on the carbon paper (rGO-CP) and used as the BPV device's anode. As a result, maximum power density was increased by 950% for Chlorella sp. UMACC 258 (0.210 mW m-2) and 781% for Synechococcus sp. UMACC 371 (0.555 mW m-2) compared to bare CP. The improved microalgae adhesion to the anode and improved electrical conductivity of rGO brought on by the effective removal of oxygen functional groups may be the causes of this. This study has demonstrated how microalgal-reduced GO may improve the efficiency of algal BPV for producing bioelectricity.
Fulltext Whole-genome sequencing of four culturable endophytic bacteria from German hardneck garlic cloves (Allium sativum L.)

Kumar G, Gan HM, Wengert P, Penix T, Parthasarathy A, Hudson AO, et al.

Microbiol Resour Announc, 2024 Apr 11;13(4):e0122523.
PMID: 38470029 DOI: 10.1128/mra.01225-23

We present the whole-genome sequence of four bacterial endophytes associated with German hardneck garlic cloves (Allium sativum L.). Among them, Agrobacterium fabrum and Pantoea agglomerans are associated with plant protection, while Rahnella perminowiae and Stenotrophomonas lactitubi are pathogens. These data will facilitate the identification of genes to improve garlic.
Synthesis of Pectin and Eggshell Biowaste-Mediated Nano-hydroxyapatite (nHAp), Their Physicochemical Characterizations, and Use as Antibacterial Material

Thakur P, Arivarasan VK, Kumar G, Pant G, Kumar R, Pandit S, et al.

Appl Biochem Biotechnol, 2024 Jan;196(1):491-505.
PMID: 37145344 DOI: 10.1007/s12010-023-04550-6

The current study reports the synthesis of sustainable nano-hydroxyapatite (nHAp) using a wet chemical precipitation approach. The materials used in the green synthesis of nHAp were obtained from environmental biowastes such as HAp from eggshells and pectin from banana peels. The physicochemical characterization of obtained nHAp was carried out using different techniques. For instance, X-ray diffractometer (XRD) and FTIR spectroscopy were used to study the crystallinity and synthesis of nHAp respectively. In addition, the morphology and elemental composition of nHAP were studied using FESEM equipped with EDX. HRTEM showed the internal structure of nHAP and calculated its grain size which was 64 nm. Furthermore, the prepared nHAp was explored for its antibacterial and antibiofilm activity which has received less attention previously. The obtained results showed the potential of pectin-bound nHAp as an antibacterial agent for various biomedical and healthcare applications.
Endophytic bacteria associated with wild-type banana seed (Musa balbisiana): whole genome sequencing

Kumar G, Gan HM, Popielarz H, Steele J, Parthasarathy A, Hudson AO, et al.

Microbiol Resour Announc, 2023 Nov 03.
PMID: 37921458 DOI: 10.1128/MRA.00650-23

We present the whole-genome sequences of five endophytic bacteria isolated from Musa balbisiana seeds. These strains represent five different genera: Bacillus, Brachybacterium, Enterobacter, Enterococcus, and Pantoea. Among these, three genera (Bacillus, Pantoea, and Enterobacter) were previously recognized for their antagonistic effects against Fusarium wilt, a highly destructive disease that affects banana plants.
Fulltext The Global, Regional, and National Burden of Adult Lip, Oral, and Pharyngeal Cancer in 204 Countries and Territories: A Systematic Analysis for the Global Burden of Disease Study 2019

GBD 2019 Lip, Oral, and Pharyngeal Cancer Collaborators, Cunha ARD, Compton K, Xu R, Mishra R, Drangsholt MT, et al.

JAMA Oncol, 2023 Oct 01;9(10):1401-1416.
PMID: 37676656 DOI: 10.1001/jamaoncol.2023.2960

IMPORTANCE: Lip, oral, and pharyngeal cancers are important contributors to cancer burden worldwide, and a comprehensive evaluation of their burden globally, regionally, and nationally is crucial for effective policy planning.
OBJECTIVE: To analyze the total and risk-attributable burden of lip and oral cavity cancer (LOC) and other pharyngeal cancer (OPC) for 204 countries and territories and by Socio-demographic Index (SDI) using 2019 Global Burden of Diseases, Injuries, and Risk Factors (GBD) Study estimates.
EVIDENCE REVIEW: The incidence, mortality, and disability-adjusted life years (DALYs) due to LOC and OPC from 1990 to 2019 were estimated using GBD 2019 methods. The GBD 2019 comparative risk assessment framework was used to estimate the proportion of deaths and DALYs for LOC and OPC attributable to smoking, tobacco, and alcohol consumption in 2019.
FINDINGS: In 2019, 370 000 (95% uncertainty interval [UI], 338 000-401 000) cases and 199 000 (95% UI, 181 000-217 000) deaths for LOC and 167 000 (95% UI, 153 000-180 000) cases and 114 000 (95% UI, 103 000-126 000) deaths for OPC were estimated to occur globally, contributing 5.5 million (95% UI, 5.0-6.0 million) and 3.2 million (95% UI, 2.9-3.6 million) DALYs, respectively. From 1990 to 2019, low-middle and low SDI regions consistently showed the highest age-standardized mortality rates due to LOC and OPC, while the high SDI strata exhibited age-standardized incidence rates decreasing for LOC and increasing for OPC. Globally in 2019, smoking had the greatest contribution to risk-attributable OPC deaths for both sexes (55.8% [95% UI, 49.2%-62.0%] of all OPC deaths in male individuals and 17.4% [95% UI, 13.8%-21.2%] of all OPC deaths in female individuals). Smoking and alcohol both contributed to substantial LOC deaths globally among male individuals (42.3% [95% UI, 35.2%-48.6%] and 40.2% [95% UI, 33.3%-46.8%] of all risk-attributable cancer deaths, respectively), while chewing tobacco contributed to the greatest attributable LOC deaths among female individuals (27.6% [95% UI, 21.5%-33.8%]), driven by high risk-attributable burden in South and Southeast Asia.
CONCLUSIONS AND RELEVANCE: In this systematic analysis, disparities in LOC and OPC burden existed across the SDI spectrum, and a considerable percentage of burden was attributable to tobacco and alcohol use. These estimates can contribute to an understanding of the distribution and disparities in LOC and OPC burden globally and support cancer control planning efforts.
Assessment of the Efficacy of TMJ Arthroscopy-Assisted Masseter Nerve Avulsion on Hemimasticatory Spasm: An Original Research

Pillai AR, Kumar GJ, Kumar P, Nizar SA, Pendyala SK, Baig FAH

J Pharm Bioallied Sci, 2023 Jul;15(Suppl 1):S110-S113.
PMID: 37654296 DOI: 10.4103/jpbs.jpbs_430_22

The goal of this study is to find a cure for the masticatory muscle disease known as hemimasticatory spasm (HMS). This retrospective investigation intends to find a more efficient therapeutic approach for HMS patients by examining the clinical effectiveness of masseteric nerve avulsion performed on HMS using a temporomandibular arthroscope. A clinical study was piloted where the subjects were treated for masseter nerve avulsion by TMJ arthroscopy. The follow-up was done till 2 years, and the subjects were evaluated for the various characteristics like difficulties, masticatory abilities, and various sounds at the joint for the various functions of the joint. The diagnosis was done using the electrophysiological electromyogram (EMG) at the designated time intervals. There was a complete remission in all the subjects. The masseter nerve avulsion was effective since the scores lowered. Within 3 years of the operation, electrophysiological EMG depicted no discharge potential with a high frequency, and the total efficiency when paired with the clinical effectiveness was deemed acceptable. The maximal masseter power between the treated and nontreated sides was comparable. The mastication, on comparing, was also as effective as the normal side; however, lower mastication was noted in the first year. The avulsed nerve tissues lacked any apparent demyelination. Masseteric nerve avulsion with temporomandibular arthroscope assistance provided acceptable and stable total effectiveness for the intervention of the hemimasticatory spasm. While the strength of the muscle of the afflicted side was only marginally reduced, its masticatory effectiveness was optimally preserved.
Fulltext Whole-Genome Sequence of Endophytic Bacteria Associated with Poison Ivy Vine (Toxicodendron radicans)

Gan HM, Penix TS, Wengert PC, Wong NH, Hudson AO, Kumar G, et al.

Microbiol Resour Announc, 2023 Apr 18;12(4):e0123222.
PMID: 36920211 DOI: 10.1128/mra.01232-22

Here, we report the genome assemblies of 11 endophytic bacteria, isolated from poison ivy vine (Toxicodendron radicans). Five species belonging to the genus Pseudomonas, two species of Curtobacterium, one strain of Pantoea agglomerans, and one species from the Bacillus, Cellulomonas, and Enterobacter genera were isolated from the interior tissue of poison ivy.
Fulltext Novel same-metal three electrode system for cyclic voltammetry studies

Periasamy V, Elumalai PNN, Talebi S, Subramaniam RT, Kasi R, Iwamoto M, et al.

RSC Adv, 2023 Feb 14;13(9):5744-5752.
PMID: 36816072 DOI: 10.1039/d3ra00457k

Conventional three-electrode systems used in electrochemical measurement demand time-consuming and maintenance intensive procedures to enable accurate and repeatable electrochemical measurements. Traditionally, different metal configurations are used to establish the electrochemical gradient required to acquire the redox activity, and vary between different electrochemical measurement platforms. However, in this work, we report using the same metal (gold) for the counter, working and reference electrodes fabricated on a miniaturized printed circuit board (PCB) for a much simpler design. Potassium ferricyanide, widely used as a redox probe for electrochemical characterization, was utilized to acquire cyclic voltametric profiles using both the printed circuit board-based gold-gold-gold three-electrode and conventional three-electrode systems (glassy carbon electrode or graphite foil as the working electrode, platinum wire as the counter electrode, and Ag/AgCl as the reference electrode). The results show that both types of electrode systems generated similar cyclic voltammograms within the same potential window (-0.5 to +0.7 V). However, the novel PCB-based same-metal three-electrode electrochemical cell only required a few activation cycles and exhibited impressive cyclic voltametric repeatability with higher redox sensitivity and detection window, while using only trace amounts of solutions/analytes.
Microalgae gasification over Ni loaded perovskites for enhanced biohydrogen generation

Valizadeh S, Khani Y, Farooq A, Kumar G, Show PL, Chen WH, et al.

Bioresour Technol, 2023 Jan 18;372:128638.
PMID: 36669624 DOI: 10.1016/j.biortech.2023.128638

Steam gasification of microalgae upon perovskite oxide-supported nickel (Ni) catalysts was carried out for H2-rich gas production. Ni-perovskite oxide catalysts with partial substitution of B in perovskite structures (Ni/CaZrO3, Ni/Ca(Zr0.8Ti0.2)O3, and Ni/Ca(Zr0.6Ti0.4)O3) were synthesized and compared with those of the Ni/Al2O3 catalyst. The perovskite oxide supports improved Ni dispersion by reducing the particle size and strengthening the Ni-support interaction. Higher gas yields and H2 selectivity were obtained using Ni-perovskite oxide catalysts rather than Ni/Al2O3. In particular, Ni/Ca(Zr0.8Ti0.2)O3 showed the highest activity and selectivity for H2 production because of the synergetic effect of metallic Ni and elements present in the perovskite structures caused by high catalytic activity coupled with enhanced oxygen mobility. Moreover, increasing the temperature promoted the yield of gas and H2 content. Overall, considering the outstanding advantages of perovskite oxides as supports for Ni catalysts is a promising prospect for H2 production via gasification technology.
Valorization of nano-based lignocellulosic derivatives to procure commercially significant value-added products for biomedical applications

As V, Kumar G, Dey N, Karunakaran R, K A, Patel AK, et al.

Environ Res, 2023 Jan 01;216(Pt 2):114400.
PMID: 36265604 DOI: 10.1016/j.envres.2022.114400

Biowaste, produced from nature, is preferred to be a good source of carbon and ligninolytic machinery for many microorganisms. They are complex biopolymers composed of lignin, cellulose, and hemicellulose traces. This biomass can be depolymerized to its nano-dimensions to gain exceptional properties useful in the field of cosmetics, pharmaceuticals, high-strength materials, etc. Nano-sized biomass derivatives overcome the inherent drawbacks of the parent material and offer promises as a potential material for a wide range of applications with their unique traits such as low-toxicity, biocompatibility, biodegradability and environmentally friendly nature with versatility. This review focuses on the production of value-added products feasible from nanocellulose, nano lignin, and xylan nanoparticles which is quite a novel study of its kind. Dawn of nanotechnology has converted bio waste by-products (hemicellulose and lignin) into useful precursors for many commercial products. Nano-cellulose has been employed in the fields of electronics, cosmetics, drug delivery, scaffolds, fillers, packaging, and engineering structures. Xylan nanoparticles and nano lignin have numerous applications as stabilizers, additives, textiles, adhesives, emulsifiers, and prodrugs for many polyphenols with an encapsulation efficiency of 50%. This study will support the potential development of composites for emerging applications in all aspects of interest and open up novel paths for multifunctional biomaterials in nano-dimensions for cosmetic, drug carrier, and clinical applications.
Fulltext Cancer Incidence, Mortality, Years of Life Lost, Years Lived With Disability, and Disability-Adjusted Life Years for 29 Cancer Groups From 2010 to 2019: A Systematic Analysis for the Global Burden of Disease Study 2019

Global Burden of Disease 2019 Cancer Collaboration, Kocarnik JM, Compton K, Dean FE, Fu W, Gaw BL, et al.

JAMA Oncol, 2022 Mar 01;8(3):420-444.
PMID: 34967848 DOI: 10.1001/jamaoncol.2021.6987

IMPORTANCE: The Global Burden of Diseases, Injuries, and Risk Factors Study 2019 (GBD 2019) provided systematic estimates of incidence, morbidity, and mortality to inform local and international efforts toward reducing cancer burden.
OBJECTIVE: To estimate cancer burden and trends globally for 204 countries and territories and by Sociodemographic Index (SDI) quintiles from 2010 to 2019.
EVIDENCE REVIEW: The GBD 2019 estimation methods were used to describe cancer incidence, mortality, years lived with disability, years of life lost, and disability-adjusted life years (DALYs) in 2019 and over the past decade. Estimates are also provided by quintiles of the SDI, a composite measure of educational attainment, income per capita, and total fertility rate for those younger than 25 years. Estimates include 95% uncertainty intervals (UIs).
FINDINGS: In 2019, there were an estimated 23.6 million (95% UI, 22.2-24.9 million) new cancer cases (17.2 million when excluding nonmelanoma skin cancer) and 10.0 million (95% UI, 9.36-10.6 million) cancer deaths globally, with an estimated 250 million (235-264 million) DALYs due to cancer. Since 2010, these represented a 26.3% (95% UI, 20.3%-32.3%) increase in new cases, a 20.9% (95% UI, 14.2%-27.6%) increase in deaths, and a 16.0% (95% UI, 9.3%-22.8%) increase in DALYs. Among 22 groups of diseases and injuries in the GBD 2019 study, cancer was second only to cardiovascular diseases for the number of deaths, years of life lost, and DALYs globally in 2019. Cancer burden differed across SDI quintiles. The proportion of years lived with disability that contributed to DALYs increased with SDI, ranging from 1.4% (1.1%-1.8%) in the low SDI quintile to 5.7% (4.2%-7.1%) in the high SDI quintile. While the high SDI quintile had the highest number of new cases in 2019, the middle SDI quintile had the highest number of cancer deaths and DALYs. From 2010 to 2019, the largest percentage increase in the numbers of cases and deaths occurred in the low and low-middle SDI quintiles.
CONCLUSIONS AND RELEVANCE: The results of this systematic analysis suggest that the global burden of cancer is substantial and growing, with burden differing by SDI. These results provide comprehensive and comparable estimates that can potentially inform efforts toward equitable cancer control around the world.
Fulltext Global Scenario of Teledentistry during COVID-19 Pandemic: An Insight

Kumar G, Rehman F, Al-Muzian L, Farsi D, Hiremath S

Int J Clin Pediatr Dent, 2021 11 2;14(3):426-429.
PMID: 34720519 DOI: 10.5005/jp-journals-10005-1952

With the advent of the coronavirus pandemic, dentistry has faced a halt as it involves face-to-face interaction with patients which had to be suspended for quite some time. Teledentistry (TD) can offer an innovative solution to resume dental practice during this pandemic. This paper gives an insight into the practice of TD being used in various countries to aid in the management of dental problems arising during the coronavirus disease 2019 (COVID-19) era. It also reviews the utilization of TD for academic institutions to facilitate educating dental students across the globe. How to cite this article: Kumar G, Rehman F, Al-Muzian L, et al. Global Scenario of Teledentistry during COVID-19 Pandemic: An Insight. Int J Clin Pediatr Dent 2021;14(3):426-429.
'First week' is the crucial period for deciding living donor liver transplantation in patients with acute-on-chronic liver failure

Choudhury A, Vijayaraghavan R, Maiwall R, Kumar M, Duan Z, Yu C, et al.

Hepatol Int, 2021 Oct 04.
PMID: 34608586 DOI: 10.1007/s12072-021-10206-6

BACKGROUND AND AIMS: Acute-on-chronic liver failure (ACLF) is a rapidly progressive illness with high short-term mortality. Timely liver transplant (LT) may improve survival. We evaluated various indices for assessment of the severity of liver failure and their application for eligibility and timing of living donor LT (LDLT).
METHODS: Altogether 1021 patients were analyzed for the severity and organ failure at admission to determine transplant eligibility and 28 day survival with or without transplant.
RESULTS: The ACLF cohort [mean age 44 ± 12.2 years, males 81%) was of sick patients; 55% willing for LT at admission, though 63% of them were ineligible due to sepsis or organ failure. On day 4, recovery in sepsis and/or organ failure led to an improvement in transplant eligibility from 37% at baseline to 63.7%. Delay in LT up to 7 days led to a higher incidence of multiorgan failure (p
Biogas production from beverage factory wastewater in a mobile bioenergy station

Lin CY, Lay CH, Chew KW, Nomanbhay S, Gu RL, Chang SH, et al.

Chemosphere, 2021 Feb;264(Pt 2):128564.
PMID: 33065325 DOI: 10.1016/j.chemosphere.2020.128564

Recently, the production of renewable biogas such as biohydrogen and biomethane from wastewaters through anaerobic fermentation has gained worldwide attention. In the present study, a mobile bioenergy generation station had been constructed based on a high-efficiency hydrogenesis & methanogenesis technology (HyMeTek) developed by Feng Chia University, Taiwan. The substrate was a beverage wastewater having chemical oxygen demand (COD) concentration of 1200 mg/L. This bioenergy station had a feedstock tank (3.8 m3), a nutrient tank (0.8 m3), an acidogenesis tank (AT, 2 m3), two methanogenesis tanks (MT, 4 m3 for each), a membrane bioreactor and a control room. Biogas production rate, methane concentration, COD removal efficiencies, energy efficiency and economical interest of the plant were assessed. The peak total methane production rates for AT (at hydraulic retention time, HRT, 4 h) and MT (at HRT 8 h) were 430 and 7 mL/L·d, respectively. A strategy of shortening HRT was a promising method to enhance biogas quality and energy efficiency. This mobile bioenergy system has commercial potential because it could bring good economic benefit of initial rate of return (58.84%) and payback time (2.68 y).
Impact of metabolic risk factors on the severity and outcome of patients with alcohol-associated acute-on-chronic liver failure

Duseja A, De A, Taneja S, Choudhury AK, Devarbhavi H, Hu J, et al.

Liver Int, 2021 01;41(1):150-157.
PMID: 32970356 DOI: 10.1111/liv.14671

BACKGROUND: Metabolic risk factors may impact the severity and outcome of alcoholic liver disease. The present study evaluated this effect in patients with alcohol-associated acute-on-chronic liver failure (ACLF).
METHODOLOGY: One thousand two hundred and sixteen prospectively enrolled patients with ACLF (males 98%, mean age 42.5 ± 9.4 years, mean CTP, MELD and AARC scores of 12 ± 1.4, 29.7 ± 7 and 9.8 ± 2 respectively) from the Asian Pacific Association for the Study of the Liver (APASL) ACLF Research Consortium (AARC) database were analysed retrospectively. Patients with or without metabolic risk factors were compared for severity (CTP, MELD, AARC scores) and day 30 and 90 mortality. Information on overweight/obesity, type 2 diabetes mellitus (T2DM), hypertension and dyslipidaemia were available in 1028 (85%), 1019 (84%), 1017 (84%) and 965 (79%) patients respectively.
RESULTS: Overall, 392 (32%) patients died at day 30 and 528 (43%) at day 90. Overweight/obesity, T2DM, hypertension and dyslipidaemia were present in 154 (15%), 142 (14%), 66 (7%) and 141 (15%) patients, respectively, with no risk factors in 809 (67%) patients. Patients with overweight/obesity had higher MELD scores (30.6 ± 7.1 vs 29.2 ± 6.9, P = .007) and those with dyslipidaemia had higher AARC scores (10.4 ± 1.2 vs 9.8 ± 2, P = .014). Overweight/obesity was associated with increased day 30 mortality (HR 1.54, 95% CI 1.06-2.24, P = .023). None of other metabolic risk factors, alone or in combination, had any impact on disease severity or mortality. On multivariate analysis, overweight or obesity was significantly associated with 30-day mortality (aHR 1.91, 95% CI 1.41-2.59, P
Fulltext A Novel Rank Aggregation-Based Hybrid Multifilter Wrapper Feature Selection Method in Software Defect Prediction

Balogun AO, Basri S, Mahamad S, Capretz LF, Imam AA, Almomani MA, et al.

Comput Intell Neurosci, 2021;2021:5069016.
PMID: 34868291 DOI: 10.1155/2021/5069016

The high dimensionality of software metric features has long been noted as a data quality problem that affects the performance of software defect prediction (SDP) models. This drawback makes it necessary to apply feature selection (FS) algorithm(s) in SDP processes. FS approaches can be categorized into three types, namely, filter FS (FFS), wrapper FS (WFS), and hybrid FS (HFS). HFS has been established as superior because it combines the strength of both FFS and WFS methods. However, selecting the most appropriate FFS (filter rank selection problem) for HFS is a challenge because the performance of FFS methods depends on the choice of datasets and classifiers. In addition, the local optima stagnation and high computational costs of WFS due to large search spaces are inherited by the HFS method. Therefore, as a solution, this study proposes a novel rank aggregation-based hybrid multifilter wrapper feature selection (RAHMFWFS) method for the selection of relevant and irredundant features from software defect datasets. The proposed RAHMFWFS is divided into two stepwise stages. The first stage involves a rank aggregation-based multifilter feature selection (RMFFS) method that addresses the filter rank selection problem by aggregating individual rank lists from multiple filter methods, using a novel rank aggregation method to generate a single, robust, and non-disjoint rank list. In the second stage, the aggregated ranked features are further preprocessed by an enhanced wrapper feature selection (EWFS) method based on a dynamic reranking strategy that is used to guide the feature subset selection process of the HFS method. This, in turn, reduces the number of evaluation cycles while amplifying or maintaining its prediction performance. The feasibility of the proposed RAHMFWFS was demonstrated on benchmarked software defect datasets with Naïve Bayes and Decision Tree classifiers, based on accuracy, the area under the curve (AUC), and F-measure values. The experimental results showed the effectiveness of RAHMFWFS in addressing filter rank selection and local optima stagnation problems in HFS, as well as the ability to select optimal features from SDP datasets while maintaining or enhancing the performance of SDP models. To conclude, the proposed RAHMFWFS achieved good performance by improving the prediction performances of SDP models across the selected datasets, compared to existing state-of-the-arts HFS methods.
3D Flower-Like FeWO4/CeO2 Hierarchical Architectures on rGO for Durable and High-Performance Microalgae Biophotovoltaic Fuel Cells

Karthikeyan C, Jenita Rani G, Ng FL, Periasamy V, Pappathi M, Jothi Rajan M, et al.

Appl Biochem Biotechnol, 2020 Nov;192(3):751-769.
PMID: 32557232 DOI: 10.1007/s12010-020-03352-4

A facile chemical reduction approach is adopted for the synthesis of iron tungstate (FeWO4)/ceria (CeO2)-decorated reduced graphene oxide (rGO) nanocomposite. Surface morphological studies of rGO/FeWO4/CeO2 composite reveal the formation of hierarchical FeWO4 flower-like microstructures on rGO sheets, in which the CeO2 nanoparticles are decorated over the FeWO4 microstructures. The distinct anodic peaks observed for the cyclic voltammograms of studied electrodes under light/dark regimes validate the electroactive proteins present in the microalgae. With the cumulative endeavors of three-dimensional FeWO4 microstructures, phase effect between rGO sheet and FeWO4/CeO2, highly exposed surface area, and light harvesting property of CeO2 nanoparticles, the relevant rGO/FeWO4/CeO2 nanocomposite demonstrates high power and stable biophotovoltaic energy generation compared with those of previous reports. Thus, these findings construct a distinct horizon to tailor a ternary nanocomposite with high electrochemical activity for the construction of cost-efficient and environmentally benign fuel cells.
Fulltext Global injury morbidity and mortality from 1990 to 2017: results from the Global Burden of Disease Study 2017

James SL, Castle CD, Dingels ZV, Fox JT, Hamilton EB, Liu Z, et al.

Inj Prev, 2020 10;26(Supp 1):i96-i114.
PMID: 32332142 DOI: 10.1136/injuryprev-2019-043494

BACKGROUND: Past research in population health trends has shown that injuries form a substantial burden of population health loss. Regular updates to injury burden assessments are critical. We report Global Burden of Disease (GBD) 2017 Study estimates on morbidity and mortality for all injuries.
METHODS: We reviewed results for injuries from the GBD 2017 study. GBD 2017 measured injury-specific mortality and years of life lost (YLLs) using the Cause of Death Ensemble model. To measure non-fatal injuries, GBD 2017 modelled injury-specific incidence and converted this to prevalence and years lived with disability (YLDs). YLLs and YLDs were summed to calculate disability-adjusted life years (DALYs).
FINDINGS: In 1990, there were 4 260 493 (4 085 700 to 4 396 138) injury deaths, which increased to 4 484 722 (4 332 010 to 4 585 554) deaths in 2017, while age-standardised mortality decreased from 1079 (1073 to 1086) to 738 (730 to 745) per 100 000. In 1990, there were 354 064 302 (95% uncertainty interval: 338 174 876 to 371 610 802) new cases of injury globally, which increased to 520 710 288 (493 430 247 to 547 988 635) new cases in 2017. During this time, age-standardised incidence decreased non-significantly from 6824 (6534 to 7147) to 6763 (6412 to 7118) per 100 000. Between 1990 and 2017, age-standardised DALYs decreased from 4947 (4655 to 5233) per 100 000 to 3267 (3058 to 3505).
INTERPRETATION: Injuries are an important cause of health loss globally, though mortality has declined between 1990 and 2017. Future research in injury burden should focus on prevention in high-burden populations, improving data collection and ensuring access to medical care.
Fulltext Optimised spectral effects of programmable LED arrays (PLA)s on bioelectricity generation from algal-biophotovoltaic devices

Ng FL, Phang SM, Lan BL, Kalavally V, Thong CH, Chong KT, et al.

Sci Rep, 2020 09 30;10(1):16105.
PMID: 32999346 DOI: 10.1038/s41598-020-72823-9

The biophotovoltaic cell (BPV) is deemed to be a potent green energy device as it demonstrates the generation of renewable energy from microalgae; however, inadequate electron generation from microalgae is a significant impediment for functional employment of these cells. The photosynthetic process is not only affected by the temperature, CO2 concentration and light intensity but also the spectrum of light. Thus, a detailed understanding of the influences of light spectrum is essential. Accordingly, we developed spectrally optimized light using programmable LED arrays (PLA)s to study the effect on algae growth and bioelectricity generation. Chlorella is a green microalga and contains chlorophyll-a (chl-a), which is the major light harvesting pigment that absorbs light in the blue and red spectrum. In this study, Chlorella is grown under a PLA which can optimally simulate the absorption spectrum of the pigments in Chlorella. This experiment investigated the growth, photosynthetic performance and bioelectricity generation of Chlorella when exposed to an optimally-tuned light spectrum. The algal BPV performed better under PLA with a peak power output of 0.581 mW m-2 for immobilized BPV device on day 8, which is an increase of 188% compared to operation under a conventional white LED light source. The photosynthetic performance, as measured using pulse amplitude modulation (PAM) fluorometry, showed that the optimized spectrum from the PLA gave an increase of 72% in the rETRmax value (190.5 μmol electrons m-2 s-1), compared with the conventional white light source. Highest algal biomass (1100 mg L-1) was achieved in the immobilized system on day eight, which translates to a carbon fixation of 550 mg carbon L-1. When artificial light is used for the BPV system, it should be optimized with the light spectrum and intensity best suited to the absorption capability of the pigments in the cells. Optimum artificial light source with algal BPV device can be integrated into a power management system for low power application (eg. environment sensor for indoor agriculture system).

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links