A case of pleomorphic xanthoastrocytoma in a 10-year-old Malay boy is reported. The patient presented with headache and epilepsy. On computed tomography, a ring-enhancing low-density lesion was observed in the left fronto-temporal area. During surgery, a cystic tumour containing serous fluid was found and almost totally removed. Histologically, the tumour exhibited marked pleomorphism of oval and spindle-shaped cells intermixed with uni- and multinucleated giant cells, and xanthomatous cells with foamy cytoplasm. The tumour displayed pericellular reticulin and periodic acid-Schiff positive granules. Focally, six mitotic characters per 10 high-power fields were seen, and necrosis was confined only to the inner lining of the cyst. Mutational analysis showed that a frameshift mutation (a 4-bp deletion) in the p53 gene had occurred in codons 273 and 274 of exon 8. No mutation was detected in the p16 gene. No allelic loss and/or loss of heterozygosity were observed on chromosome 10 using microsatellite marker D105532. The patient was treated with postoperative radiotherapy because of histological anaplasia and the presence of residual tumour. The patient showed marked neurological recovery after a follow-up period of 2 years.
Several genes have been shown to carry mutations in human malignant gliomas, including the phosphatase and tensin homolog (PTEN) deleted on chromosome 10 and p16 tumor suppressor genes. Alterations of this gene located on chromosome 10 q23 and 9p21, respectively, may contribute to gliomagenesis. In this study, the authors analyzed 20 cases of malignant gliomas obtained in patients living on the east coast of Malaysia to investigate the possibilities of involvement of the PTEN and p16 genes.
Recent advances in neuro-oncology have revealed different pathways of molecular oncogenesis in malignant gliomas including loss of heterozygosity on chromosomal regions harboring tumor suppressor genes. In the present study, we performed polymerase chain reaction-loss of heterozygosity (PCR-LOH) analysis using microsatellite markers to identify loss of heterozygosity on chromosomes 10q, 9p, 17p and 13q in the Malays with malignant gliomas. Of 12 cases with allelic losses, seven (58.3%) cases showed LOH on chromosome 10q, three (25.0%) cases showed LOH on chromosome 9p, four (33.3%) cases showed LOH on chromosome 17p and two (16.7%) cases showed LOH on chromosome 13q. The cases include five (41.7%) cases of glioblastoma multiforme, three (25.0%) cases of anaplastic astrocytoma, three (25.0%) cases of anaplastic oligodendroglioma and one (8.3%) case of anaplastic ependymoma. Four cases showed loss of heterozygosity on more than one locus. Our findings showed that loss of heterozygosity on specific chromosomal regions contributes to the molecular pathway of glioma progression in Malay population. In addition, these data provide useful evidence of molecular genetic alterations of malignant glioma in South East Asian patients, particularly in the East Coast of Malaysia.
The new millennium has been regarded as a genomic era. A lot of researchers and pathologists are beginning to understand the scientific basis of molecular genetics and relates with the progression of the diseases. Central nervous system (CNS) tumours are among the most rapidly fatal of all cancers. It has been proposed that the progression of malignant tumours may result from multi-step of genetic alterations, including activation of oncogenes, inactivation of tumour suppressor genes and also the presence of certain molecular marker such as telomerase activity. In this paper, we review some recent data from the literature, including our own studies, on the molecular genetics analysis in CNS tumours. Our studies have shown that two types of tumour suppressor genes, p53 and PTEN were involved in the development of these tumours but not in p16 gene among the patients from Hospital Universiti Sains Malaysia (HUSM). Telomerase activity also has been detected in various types of CNS tumours. Thus, it is important to assemble all data which related to this study and may provide as a vital information in a new approach to neuro-oncology studies in Malaysia.
Loss of heterozygosity (LOH) on several loci and mutations on PTEN tumor suppressor gene (10q23.3) occur frequently in sporadic gliomas. We have performed polymerase chain reaction (PCR)-LOH analysis using microsatellite markers and single-stranded conformational polymorphism (SSCP) analysis to determine the incidence of allelic losses on chromosome 10q, 9p, 17p and 13q and mutations of exons 5, 6 and 8 of the PTEN gene in malignant gliomas. Twelve of 23 (52.2%) malignant glioma cases showed allelic losses whereas 7 of 23, (30.4%) samples showed aberrant band patterns and mutations of the PTEN gene. Four of these cases showed LOH on 10q23 and mutations of the PTEN gene. The data on LOH indicated the involvement of different genes in gliomagenesis whereas mutations of the PTEN gene indicated the role of PTEN tumor suppressor gene in the progression of glioma in Malay population.
Frequent loss of heterozygosity (LOH) and mutations of the tumor suppressor gene PTEN (phosphatase and tensin homologue deleted from chromosome 10) have been found in sporadic gliomas. The most documented regions of allelic losses include 9p21, 10q23-25 and 17p1 3 whereas PTEN aberrations are preferentially found in glioblastoma multiformes. This research aimed to detect the incidence of allelic losses on chromosomes 10q, 9p, 17p and 13q and mutations on exons 5, 6 and 8 of PTEN in malignant gliomas. Malignant glioma specimens obtained were classified histopathologically according to the WHO criteria. Each tumor was then subjected to polymerase chain reaction (PCR)-LOH analysis using microsatellite markers and single-stranded conformational polymorphism (SSCP) analysis. Twelve of 23 (52%) malignant glioma cases showed allelic losses whereas 7 of 23 (30%) samples showed aberrant band patterns and mutations of PTEN. Four of these cases showed LOH in 10q23 and mutations of PTEN. The data on LOH indicated the involvement of different genes in the genesis of glioma whereas mutations of PTEN indicated the role of PTEN tumor suppressor gene in the progression of glioma in Malay population.
We describe a rare tumor site in a 46 year old man who presented with a two week history of headache. Physical examination revealed bilateral papilloedema with no other localizing signs. Computed Tomographic Scan as well as Magnetic Resonance Imaging of the brain revealed a lesion with a dura tail located adjacent to the falx cerebri of the right frontal lobe. This lesion was not invading the inner table of the skull base. A tumor blush was seen on angiogram. There were no abnormalities on CT scan of the abdomen and fundoscopy was normal. Intraoperatively a vascular tumor not attached to the dura was noted and removed totally. Histopathological examination was typical of a hemangioblastoma. Analysis revealed no mutations of the VHL gene in 5 regions, exon 5-8 of the p53 gene, exon 1-2 of the p16 gene and exon 5,6 and 8 of the PTEN gene. This is the first case report of a supratentorial hemangioblastoma in a non-Von Hippel Lindau patient with genetic evidence.
The pattern of allelic loss of heterozygosity (LOH) and PTEN mutations appear to be associated with the progression of gliomas leading to a decrement in the survival rate of patients. This present study was carried out to determine the LOH and PTEN mutational status in glioma patients and its association with patients' survival.
The purpose of this study was to characterize commercial glass polyalkenoate cement (GPC) or glass ionomer cement (GIC), Glass Carbomer(®), which is designed to promote remineralization to fluorapatite (FAp) in the mouth. The setting reaction of the cement was followed using magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy.
Poly(lactic acid) (PLA) is known to be a useful material in substituting the conventional petroleum-based polymer used in packaging, due to its biodegradability and high mechanical strength. Despite the excellent properties of PLA, low flexibility has limited the application of this material. Thus, epoxidized palm olein (EPO) was incorporated into PLA at different loadings (1, 2, 3, 4 and 5 wt%) through the melt blending technique and the product was characterized. The addition of EPO resulted in a decrease in glass transition temperature and an increase of elongation-at-break, which indicates an increase in the PLA chain mobility. PLA/EPO blends also exhibited higher thermal stability than neat PLA. Further, the PLA/1 wt% EPO blend showed enhancement in the tensile, flexural and impact properties. This is due to improved interaction in the blend producing good compatible morphologies, which can be revealed by Scanning Electron Microscopy (SEM) analysis. Therefore, PLA can be efficiently plasticized by EPO and the feasibility of its use as flexible film for food packaging should be considered.
Herein we report a synthesis of copper nanoparticles (Cu-NPs) in chitosan (Cts) media via a chemical reaction method. The nanoparticles were synthesized in an aqueous solution in the presence of Cts as stabilizer and CuSO(4)·5H(2)O precursor. The synthesis proceeded with addition of NaOH as pH moderator, ascorbic acid as antioxidant and hydrazine( )as the reducing agent. The characterization of the prepared NPs was done using ultraviolet-visible spectroscopy, which showed a 593 nm copper band. The Field Emission Scanning Electron Microscope (FESEM) images were also observed, and found to be in agreement with the UV-Vis result, confirming the formation of metallic Cu-NPs. The mean size of the Cu-NPs was estimated to be in the range of 35-75 nm using X-ray diffraction. XRD was also used in analysis of the crystal structure of the NPs. The interaction between the chitosan and the synthesized NPs was studied using Fourier transform infrared (FT-IR) spectroscopy, which showed the capping of the NPs by Cts.
In this work, hydrogels were prepared from carboxymethyl cellulose (CMC) and 1-vinyl-2-pyrrolidone(VP) by Electron Beam irradiation in the presence of N,N'-methylenebisacrylamide (BIS) as a crosslinkingagent. The parameters studied include stirring time and percentage of crosslinking agent. Hydrogels werecharacterized using Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy(SEM). VP and BIS were found be effective as reinforcement materials to improve the properties ofCMC. Meanwhile, the optimum conditions were 5% BIS and 3 hours of stirring time. The gel fractionincreased when irradiation dose was increased. FTIR confirmed the crosslinking reaction between CMCand VP after the irradiation process by using BIS as the crosslinking agent. TGA thermograms showedchanges in the thermal properties of CMC-VP hydrogels in the presence of different amounts of BIS.
Copper nanoparticle synthesis has been gaining attention due to its availability. However, factors such as agglomeration and rapid oxidation have made it a difficult research area. In the present work, pure copper nanoparticles were prepared in the presence of a chitosan stabilizer through chemical means. The purity of the nanoparticles was authenticated using different characterization techniques, including ultraviolet visible spectroscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscopy. The antibacterial as well as antifungal activity of the nanoparticles were investigated using several microorganisms of interest, including methicillin-resistant Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Salmonella choleraesuis, and Candida albicans. The effect of a chitosan medium on growth of the microorganism was studied, and this was found to influence growth rate. The size of the copper nanoparticles obtained was in the range of 2-350 nm, depending on the concentration of the chitosan stabilizer.
Natural fiber as reinforcement filler in polymer composites is an attractive approach due to being fully biodegradable and cheap. However, incompatibility between hydrophilic natural fiber and hydrophobic polymer matrix restricts the application. The current studies focus on the effects of incorporation of silane treated OPMF into polylactic acid (PLA)/polycaprolactone (PCL)/nanoclay/OPMF hybrid composites. The composites were prepared by melt blending technique and characterize the composites with Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). FTIR spectra indicated that peak shifting occurs when silane treated OPMF was incorporated into hybrid composites. Based on mechanical properties results, incorporation of silane treated OPMF enhances the mechanical properties of unmodified OPMF hybrid composites with the enhancement of flexural and impact strength being 17.60% and 48.43%, respectively, at 10% fiber loading. TGA thermogram shows that incorporation of silane treated OPMF did not show increment in thermal properties of hybrid composites. SEM micrographs revealed that silane treated OPMF hybrid composites show good fiber/matrix adhesion as fiber is still embedded in the matrix and no cavity is present on the surface. Water absorption test shows that addition of less hydrophilic silane treated OPMF successfully reduces the water uptake of hybrid composites.
In this paper, superheated steam (SHS) was used as cost effective and green processing technique to modify oil palm mesocarp fiber (OPMF) for biocomposite applications. The purpose of this modification was to promote the adhesion between fiber and thermoplastic. The modification was carried out in a SHS oven at various temperature (200-230 °C) and time (30-120 min) under normal atmospheric pressure. The biocomposites from SHS-treated OPMFs and poly(butylene succinate) (PBS) at a weight ratio of 70:30 were prepared by melt blending technique. The mechanical properties and dimensional stability of the biocomposites were evaluated. This study showed that the SHS treatment increased the roughness of the fiber surface due to the removal of surface impurities and hemicellulose. The tensile, flexural and impact properties, as well as dimensional stability of the biocomposites were markedly enhanced by the presence of SHS-treated OPMF. Scanning electron microscopy analysis showed improvement of interfacial adhesion between PBS and SHS-treated OPMF. This work demonstrated that SHS could be used as an eco-friendly and sustainable processing method for modification of OPMF in biocomposite fabrication.
In this work, biodegradable composites from poly(lactic acid) (PLA) and oil palm empty fruit bunch (OPEFB) fiber were prepared by melt blending method. Prior to mixing, the fiber was modified through bleaching treatment using hydrogen peroxide. Bleached fiber composite showed an improvement in mechanical properties as compared to untreated fiber composite due to the enhanced fiber/matrix interfacial adhesion. Interestingly, fiber bleaching treatment also improved the physical appearance of the composite. The study was extended by blending the composites with commercially available masterbatch colorant.
Polyhydroxybutyrate (PHB)/polycaprolactone (PCL)/stearate Mg-Al layered double hydroxide (LDH) nanocomposites were prepared via solution casting intercalation method. Coprecipitation method was used to prepare the anionic clay Mg-Al LDH from nitrate salt solution. Modification of nitrate anions by stearate anions between the LDH layers via ion exchange reaction. FTIR spectra showed the presence of carboxylic acid (COOH) group which indicates that stearate anions were successfully intercalated into the Mg-Al LDH. The formation of nanocomposites only involves physical interaction as there are no new functional groups or new bonding formed. X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the mixtures of nanocomposites are intercalated and exfoliated types. XRD results showed increasing of basal spacing from 8.66 to 32.97 Å in modified stearate Mg-Al LDH, and TEM results revealed that the stearate Mg-Al LDH layers are homogeneously distributed in the PHB/PCL polymer blends matrix. Enhancement in 300% elongation at break and 66% tensile strength in the presence of 1.0 wt % of the stearate Mg-Al LDH as compare with PHB/PCL blends. Scanning electron microscopy (SEM) proved that clay improves compatibility between polymer matrix and the best ratio 80PHB/20PCL/1stearate Mg-Al LDH surface is well dispersed and stretched before it breaks.
Bleaching treatment of kenaf fiber was performed in alkaline medium containing hydrogen peroxide solution maintained at pH 11 and 80 °C for 60 min. The bleached kenaf fiber was analyzed using Fourier Transform Infrared (FTIR) and X-ray Diffraction (XRD) analysis. The bleached kenaf fiber was then compounded with poly-(lactic acid) (PLA) via a melt blending method. The mechanical (tensile, flexural and impact) performance of the product was tested. The fiber treatment improved the mechanical properties of PLA/bleached kenaf fiber composites. Scanning electron micrograph (SEM) morphological analysis showed improvement of the interfacial adhesion between the fiber surface and polymer matrix.
Discharging ear is a common symptom in the primary care and private general clinics. Most of the cases are treated with the antibiotic ear drops for otitis externa or otitis media. However, despite an adequate standard therapy, a malignant tumour can also be present with non-specific symptom such as ear discharge, especially in the case of persistent ear discharge. In this paper we have reported a case of an adult woman presented with non-resolving ear discharge who was treated repeatedly with antibiotic ear drop, which was later diagnosed as squamous cell carcinoma.
Carboxymethyl sago starch-acid hydrogel was prepared via irradiation technique to remove divalent metal ions (Pb, Cu and Cd) from their aqueous solution. The hydrogel was characterized by using Fourier Transform Infrared (FT-IR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The removal of these metal ions was analyzed by using inductively coupled plasma-optic emission spectra (ICP-OES) to study the amount of metal uptake by the hydrogel. Parameters of study include effect of pH, amount of sample, contact time, initial concentration of metal solution and reaction temperature. FTIR spectroscopy shows the CMSS hydrogel absorption peaks at 1741cm(-1), 1605cm(-1) and 1430cm(-1) which indicates the substitution of carboxymethyl group of modified sago starch. The degradation temperature of CMSS hydrogel is higher compared to CMSS due to the crosslinking by electron beam radiation and formed a porous hydrogel. From the data obtained, about 93.5%, 88.4% and 85.5% of Pb, Cu and Cd ions has been respectively removed from their solution under optimum condition.