Displaying publications 1 - 20 of 42 in total

Abstract:
Sort:
  1. Cost Effectiveness of a Platelet-rich Plasma Preparation Technique for Clinical Use
    Hamid MSA
    Wounds, 2018 Jul;30(7):186-190.
    PMID: 30059343
    INTRODUCTION: Despite limited clinical evidence, platelet-rich plasma (PRP) is currently used for the treatment of various soft tissue injuries, but optimal use of PRP has yet to be determined. In many instances, PRP is prepared using commercial devices that lack standardized preparation techniques and consistent quality of the PRP produced.

    OBJECTIVE: The aim of this study is to explore a simple, easy, economical method of PRP preparation that is practical for clinical use.

    MATERIALS AND METHODS: This cross-sectional study was conducted at the Sports Medicine Clinic at the University of Malaya Medical Centre, Malaysia. Participants were healthy postgraduate students and staff at the Sports Medicine Department. The PRP was prepared using a single centrifugation technique. Leukocyte and platelet levels were compared with that of a whole blood baseline and a commercial preparation kit.

    RESULTS: The PRP produced using this technique contained significantly higher mean platelet (1725.0 vs. 273.9 x 109/L) and leukocyte (33.6 vs. 7.7 x 109/L) levels compared with whole blood. There was no significant difference in the mean platelet and leukocyte levels between the PRP produced in this study and by a commercial PRP system.

    CONCLUSIONS: A single-centrifugation protocol using readily available materials in a typical clinical setting could produce PRP of comparable quality to those of a commercial PRP production system.

    Matched MeSH terms: Centrifugation/economics; Centrifugation/methods*
  2. Fatty acid preference of mycelium-bound lipase from a locally isolated strain of Geotrichum candidum
    Loo JL, Lai OM, Long K, Ghazali HM
    World J Microbiol Biotechnol, 2007 Dec;23(12):1771-8.
    PMID: 27517833 DOI: 10.1007/s11274-007-9427-2
    Mycelium-bound lipase (MBL) was prepared using a strain of Geotrichum candidum isolated from local soil. At the time of maximum lipase activity (54 h), the mycelia to which the lipase was bound were harvested by filtration and centrifugation. Dry MBL was prepared by lyophilizing the mycelia obtained. The yield of MBL was 3.66 g/l with a protein content of 44.11 mg/g. The lipase activity and specific lipase activity were 22.59 and 510 U/g protein, respectively. The moisture content of the MBL was 3.85%. The activity of free (extracellular) lipase in the culture supernatant (after removal of mycelia) was less than 0.2 U/ml. The MBL showed selectivity for oleic acid over palmitic acid during hydrolysis of palm olein, indicating that the lipase from G. candidum displayed high substrate selectivity for unsaturated fatty acid containing a cis-9 double bond, even in crude form. This unique specificity of MBL could be a direct, simple and inexpensive way in the fats and oil industry for the selective hydrolysis or transesterification of cis-9 fatty acid residues in natural triacylglycerols.
    Matched MeSH terms: Centrifugation
  3. Fulltext Risk Factors and Severity of Gastrointestinal Parasites in Selected Small Ruminants from Malaysia
    Paul BT, Jesse FFA, Chung ELT, Che'Amat A, Mohd Lila MA
    Vet Sci, 2020 Dec 18;7(4).
    PMID: 33353135 DOI: 10.3390/vetsci7040208
    The productivity of smallholder sheep and goat flocks is constrained by high morbidity and mortality of young stock due to helminthosis and coccidiosis. We hypothesized that gastrointestinal parasites are prevalent and may cause severe infections amongst small ruminants in Malaysia. A cross-sectional survey was conducted between March and December 2019 to investigate the prevalence, risk factors, and levels of infection with gastrointestinal strongyle and coccidia in selected smallholder goat flocks in Negeri Sembilan, Malaysia. A total of 257 blood and fecal samples and management data were collected from four farms in Negeri Sembilan. Gastrointestinal parasites were detected by routine sodium chloride floatation, and the McMaster technique was used to quantify the fecal eggs/oocysts per gram outputs (EPG/OPG). The severity of infection was classified as mild (50-799), moderate (800-1200), or severe (>1200). The packed cell volume (PCV) was determined by microhematocrit centrifugation and classified as anemic or non-anemic. Coprological examination revealed an overall prevalence of 78.6% (CI = 72.74-83.44) and 100% flock level prevalence of strongyle and coccidia infection among goats from Negeri Sembilan with a higher infection in flock A-Lenggeng (95.6%) than B-Senawang (87.3%), D-Mendom (80.6%), or C-Seremban (60.0%). The co-infections of strongyle + Eimeria (50.6; CI = 44.50 to 56.64) were more common than single infections of either strongyle (16.7%; CI = 12.66 to 21.78) or Eimeria (4.3%; CI = 2.41 to 7.50). Quantitative analysis has revealed different (p < 0.05) patterns of EPG/OPG in various categories of goats. In total, there were 49.8% mild, 8.6% moderate, and 13.6% severe infections of strongyle and 40.1% mild, 6.6% moderate, and 19.8% severe infections of coccidia among goats. The mean PCV of goats with severe strongyle infection (24.60 ± 0.85) was significantly (p < 0.05) lower than the moderate (26.90 ± 1.15), or mild (28.23 ± 0.50) infections and the uninfected (30.4 ± 0.71). There were increased odds of infection with strongyle and coccidia among female (OR = 3.2) and adult (OR = 11.0) goats from smallholder flocks in Negeri Sembilan. In conclusion, gastrointestinal strongyles and coccidia occur at high frequency among smallholder goats, and there is a higher risk of infection amongst the adult and female stock.
    Matched MeSH terms: Centrifugation
  4. Fulltext Development of a passive liquid valve (PLV) utilizing a pressure equilibrium phenomenon on the centrifugal microfluidic platform
    Al-Faqheri W, Ibrahim F, Thio TH, Bahari N, Arof H, Rothan HA, et al.
    Sensors (Basel), 2015 Feb 25;15(3):4658-76.
    PMID: 25723143 DOI: 10.3390/s150304658
    In this paper, we propose an easy-to-implement passive liquid valve (PLV) for the microfluidic compact-disc (CD). This valve can be implemented by introducing venting chambers to control the air flow of the source and destination chambers. The PLV mechanism is based on equalizing the main forces acting on the microfluidic CD (i.e., the centrifugal and capillary forces) to control the burst frequency of the source chamber liquid. For a better understanding of the physics behind the proposed PLV, an analytical model is described. Moreover, three parameters that control the effectiveness of the proposed valve, i.e., the liquid height, liquid density, and venting chamber position with respect to the CD center, are tested experimentally. To demonstrate the ability of the proposed PLV valve, microfluidic liquid switching and liquid metering are performed. In addition, a Bradford assay is performed to measure the protein concentration and evaluated in comparison to the benchtop procedure. The result shows that the proposed valve can be implemented in any microfluidic process that requires simplicity and accuracy. Moreover, the developed valve increases the flexibility of the centrifugal CD platform for passive control of the liquid flow without the need for an external force or trigger.
    Matched MeSH terms: Centrifugation*
  5. Fulltext New insights of phenolic compounds from optimized fruit extract of Ficus auriculata
    Shahinuzzaman M, Akhtar P, Amin N, Ahmed Y, Anuar FH, Misran H, et al.
    Sci Rep, 2021 Jun 14;11(1):12503.
    PMID: 34127747 DOI: 10.1038/s41598-021-91913-w
    In this study, the extraction conditions extracted maximize amounts of phenolic and bioactive compounds from the fruit extract of Ficus auriculata by using optimized response surface methodology. The antioxidant capacity was evaluated through the assay of radical scavenging ability on DPPH and ABTS as well as reducing power assays on total phenolic content (TPC). For the extraction purpose, the ultrasonic assisted extraction technique was employed. A second-order polynomial model satisfactorily fitted to the experimental findings concerning antioxidant activity (R2 = 0.968, P 
    Matched MeSH terms: Centrifugation
  6. Fulltext Aspergillus sydowii strain SCAU066 and aspergillus versicolor isolate BAB-6580: potential source of xylanolytic, cellulolytic and amylolytic enzymes
    Nur Syahira Mohammad, Zaidah Zainal Ariffin
    Science Letters, 2020;14(2):15-23.
    MyJurnal
    Fungi is known to produce a wide range of biologically active metabolites and enzymes. Enzymes produced by fungi are utilized in food and pharmaceutical industries because of their rich enzymatic profile. Filamentous fungi are particularly interesting due to their high production of extracellular enzymes which has a large industrial potential. The aim of this study is to isolate potential soil fungi species that are able to produce functional enzymes for industries. Five Aspergillus species were successfully isolated from antibiotic overexposed soil (GPS coordinate of N3.093219 E101.40269) by standard microbiological method. The isolated fungi were identified via morphological observations and molecular tools; polymerase chain reactions, ITS 1 (5’- TCC GTA GGT GAA CCT GCG G3’) forward primer and ITS 4 (5’-TCC TCC GCT TAT TGA TAT GC-3’) reverse primer. The isolated fungi were identified as Aspergillus sydowii strain SCAU066, Aspergillus tamarii isolate TN-7, Aspergillus candidus strain KUFA 0062, Aspergillus versicolor isolate BAB-6580, and Aspergillus protuberus strain KAS 6024. Supernatant obtained via submerged fermentation of the isolated fungi in potato dextrose broth (PDB) and extracted via centrifugation was loaded onto specific media to screen for the production of xylanolytic, cellulolytic and amylolytic enzymes. The present findings indicate that Aspergillus sydowii strain SCAU066 and Aspergillus versicolor isolate BAB-6580 have great potential as an alternative source of xylanolytic, cellulolytic and amylolytic enzymes.
    Matched MeSH terms: Centrifugation
  7. Rapid extraction of bisphenol a by dispersive liquid-liquid microextraction based on solidification of floating organic
    Shan TO, Mee LN, Marinah Mohd Ariffin, Saw HL
    Sains Malaysiana, 2017;46:615-621.
    Bisphenol A is an endocrine disruptor with widespread applications, especially in the production of polycarbonate and epoxy resins. Dispersive liquid-liquid microextraction based on solidification of floating organic technique has been developed for the extraction of bisphenol A from water and soft drink. The 1-undecanol has been applied as the extraction solvent because of its low density and melting point and high affinity to the analyte. The technique offered rapid and simple analysis as the 1-undecanol was homogeneously dispersed in the sample solution to speed the extraction and the collection of extraction solvent was simplified by centrifugation, cooling and melting steps.
    Matched MeSH terms: Centrifugation
  8. Tensile properties of vulcanized field natural rubber latex by electron beam
    Chai CK, Md. Soot Ahmad, Wan Manshol W. Zin
    Sains Malaysiana, 2008;37.
    Electron beam vulcanization of natural rubber latex has been developed as an alternative to the conventional sulphur vulcanization method. This study aimed at determining the effect of electron beam dose, beam current and centrifugation to the tensile properties of field natural rubber latex. Irradiation dose and beam current ranged from 50 to 300 kGy and 1 to 15 mA respectively. The determination of tensile properties were done on cast film prepared from irradiated field latex before and after centrifugation. It was found that tensile properties increased with radiation dose but decreased with beam current. Rubber films made from centrifuged irradiated field latex were softer and showed higher tensile strength.
    Matched MeSH terms: Centrifugation
  9. Isolation and fractionation of cellulose nanocrystals from kenaf core
    Hanisah Syed Sulaiman, Chin HC, Chan CH, Sarani Zakaria, Sharifah Nabihah Syed Jaafar
    Sains Malaysiana, 2015;44:1635-1642.
    In this study, cellulose nanocrystals (CNC) were produced using acid hydrolysis method. Kenaf core was pretreated with 4
    wt. % sodium hydroxide (NaOH), followed by bleaching using 1.7 wt. % sodium chlorite (NaClO2
    ) in acetate buffer. The
    bleached fiber was acid hydrolyzed for 45 and 55 min using 64 wt. % sulfuric acid (H2
    SO4
    ). The size distribution of the
    CNC segregated via differential centrifugation with different speed was also investigated. The CNC suspension obtained
    was centrifuged at 3000, 6000, 9000 and 12000 rpm. The resultant CNC suspension collected was characterized using
    Fourier transform infrared (FTIR) analysis, X-ray diffraction (XRD) and transmission electron microscopy (TEM). FTIR
    results showed the progressive removal of non-cellulosic constituents for each subsequent treatment. It also showed that
    the CNC produced after hydrolysing for 55 min has the highest degree of crystallinity (81.15%). CNC produced from acid
    hydrolysis process of 45 min have lengths between 50 and 270 nm while CNC produced from acid hydrolysis process of
    55 min have length around 40 to 370 nm.
    Matched MeSH terms: Centrifugation
  10. Fulltext Investigation of Embedded Si/C System Exposed to a Hybrid Reaction of Centrifugal-Assisted Thermite Method
    Mahmoodian R, Yahya R, Dabbagh A, Hamdi M, Hassan MA
    PLoS One, 2015;10(12):e0144632.
    PMID: 26641651 DOI: 10.1371/journal.pone.0144632
    A novel method is proposed to study the behavior and phase formation of a Si+C compacted pellet under centrifugal acceleration in a hybrid reaction. Si+C as elemental mixture in the form of a pellet is embedded in a centrifugal tube. The pellet assembly and tube are exposed to the sudden thermal energy of a thermite reaction resulted in a hybrid reaction. The hybrid reaction of thermite and Si+C produced unique phases. X-ray diffraction pattern (XRD) as well as microstructural and elemental analyses are then investigated. XRD pattern showed formation of materials with possible electronic and magnetic properties. The cooling rate and the molten particle viscosity mathematical model of the process are meant to assist in understanding the physical and chemical phenomena took place during and after reaction. The results analysis revealed that up to 85% of materials converted into secondary products as ceramics-matrix composite.
    Matched MeSH terms: Centrifugation
  11. Fulltext Vacuum/compression valving (VCV) using parrafin-wax on a centrifugal microfluidic CD platform
    Al-Faqheri W, Ibrahim F, Thio TH, Moebius J, Joseph K, Arof H, et al.
    PLoS One, 2013;8(3):e58523.
    PMID: 23505528 DOI: 10.1371/journal.pone.0058523
    This paper introduces novel vacuum/compression valves (VCVs) utilizing paraffin wax. A VCV is implemented by sealing the venting channel/hole with wax plugs (for normally-closed valve), or to be sealed by wax (for normally-open valve), and is activated by localized heating on the CD surface. We demonstrate that the VCV provides the advantages of avoiding unnecessary heating of the sample/reagents in the diagnostic process, allowing for vacuum sealing of the CD, and clear separation of the paraffin wax from the sample/reagents in the microfluidic process. As a proof of concept, the microfluidic processes of liquid flow switching and liquid metering is demonstrated with the VCV. Results show that the VCV lowers the required spinning frequency to perform the microfluidic processes with high accuracy and ease of control.
    Matched MeSH terms: Centrifugation*
  12. Effect of Gibberellin and Heat Shock on the Lipid Composition of Endoplasmic Reticulum in Barley Aleurone Layers
    Grindstaff KK, Fielding LA, Brodl MR
    Plant Physiol, 1996 Feb;110(2):571-581.
    PMID: 12226205
    The heat-shock responses of barley (Hordeum vulgare L. cv Hi- malaya) aleurone layers incubated with or without gibberellic acid (GA3) were compared. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed that heat shock blocked the synthesis and secretion of secretory proteins from GA3-treated layers but not untreated layers. This suppression of secretory protein synthesis has been correlated with changes in endoplasmic reticulum (ER) membranes (F.C. Belanger, M. R. Brodl, T.-h.D. Ho [1986] Proc Natl Acad Sci USA 83: 1354-1358; L. Sticher, A.K. Biswas, D.S. Bush, R.L. Jones [1990] Plant Physiol 92: 506-513). Our secretion data suggested that the ER membranes of aleurone layers incubated without GA3 may be more heat shock tolerant. To investigate this, the lipid profiles of membrane extracts in aleurone layers labeled with [14C]glycerol were examined. Heat shock markedly increased [14C]glycerol incorporation into phosphatidylcholine (PC), and gas chromatography revealed an increase in the amount of saturated fatty acids associated with thin layer chromatography-purified PC in GA3-treated layers. In contrast, aleurone layers incubated without GA3 at normal temperature contained PC-associated fatty acids with a greater degree of saturation than GA3-treated layers. Heat shock modestly increased the degree of fatty acid saturation in untreated aleurone layers. This same trend was noted in fatty acids isolated from ER membranes purified by continuous sucrose density centrifugation. We propose that increased fatty acid saturation may help sustain ER membrane function in heat-shocked aleurone layers incubated in the absence of GA3.
    Matched MeSH terms: Centrifugation
  13. Fulltext Effect of higher centrifugation speed and shortened centrifugation time on prothrombin and activated thromboplastin time
    Azlin, I., Hafiza, A., Azma, R.Z., Aidifitrina, R.K., Hamidah, N.H.
    Medicine & Health, 2011;6(1):68-72.
    MyJurnal
    Centrifugation of blood samples to produce platelet-poor plasma is one of the important steps for coagulation testing. Reduction of the time required for specimen processing without affecting quality of results should be ideal for tests which require immediate results. Centrifugation of platelet-poor plasma (3580 rpm) for 15 minutes performed for routine coagulation tests would prolong the turn-around time for an urgent test (30 minutes). This study was done to determine the effect of reducing centrifugation time for routine coagulation tests in order to meet the turn-around time (TAT) for urgent tests. Seventy-nine blood samples sent for routine coagulation tests, were assayed for prothrombin time (PT), activated partial thromboplastin time (APTT), fibrinogen level and platelet counts, using two different centrifugation speed for plasma preparation: centrifugation at 3580 rpm for 15 minutes and rapid centrifugation at 4000 rpm for five minutes. Paired sample t-test showed that there was a significant
    difference in the platelet count between the two groups (p=0.001). However, there was no significant difference in the normal APTT (p=0.16), abnormal APTT (p=0.80), abnormal PT (p=0.43) and the results of fibrinogen levels (p=0.36). In conclusion, rapid centrifugation at 4000 rpm for five minutes does not modify results of routine coagulation tests (PT, APTT and fibrinogen). It would be beneficial in providing rapid results for urgent coagulation tests.
    Matched MeSH terms: Centrifugation
  14. Fulltext Theoretical development and critical analysis of burst frequency equations for passive valves on centrifugal microfluidic platforms
    Thio TH, Soroori S, Ibrahim F, Al-Faqheri W, Soin N, Kulinsky L, et al.
    Med Biol Eng Comput, 2013 May;51(5):525-35.
    PMID: 23292292 DOI: 10.1007/s11517-012-1020-7
    This paper presents a theoretical development and critical analysis of the burst frequency equations for capillary valves on a microfluidic compact disc (CD) platform. This analysis includes background on passive capillary valves and the governing models/equations that have been developed to date. The implicit assumptions and limitations of these models are discussed. The fluid meniscus dynamics before bursting is broken up into a multi-stage model and a more accurate version of the burst frequency equation for the capillary valves is proposed. The modified equations are used to evaluate the effects of various CD design parameters such as the hydraulic diameter, the height to width aspect ratio, and the opening wedge angle of the channel on the burst pressure.
    Matched MeSH terms: Centrifugation/instrumentation
  15. Fulltext Optimization of Washing Processes in Solvothermal Synthesis of Nickel-Based MOF-74
    Kamal K, Bustam MA, Ismail M, Grekov D, Mohd Shariff A, Pré P
    Materials (Basel), 2020 Jun 17;13(12).
    PMID: 32560394 DOI: 10.3390/ma13122741
    Solvothermal synthesis is the most preferable preparation technique of metal-organic frameworks (MOFs) that consists of reactants mixing, ultrasonication, solvothermal reaction, product washing, and solvent evacuation. Owing to fast reaction kinetics in solvothermal reaction, this technique allows for production of uniform MOF particles with high crystallinity, high phase purity, and small particle sizes. However, it exhibits some difficulties of washing processes that may involve the blockage of pores due to incomplete removal of reactive medium from MOF products. The present study proposes an improvement of washing processes by introducing centrifugal separations with optimized parameters at two different stages: after reaction and after product washing. Nickel‑based MOF‑74 was synthesized as the experimental material for this purpose. The quality of the produced sample was evaluated by gas adsorption performance using CO2 at 1 bar and 25 °C. The final sample of the optimized synthesis routes was able to adsorb 5.80 mmol/g of CO2 uptake, which was competitive with literature data and significantly higher than the sample of the basic synthesis. Fourier‑transform infrared spectroscopy (FTIR) and powder X‑ray diffraction (PXRD) analysis revealed that the sample displayed much higher crystallinity structure and was clean from impurities after centrifugations. The outcome indicated the success of separation between MOF products and reactive medium during washing processes, leading to the effective pore activation of MOFs.
    Matched MeSH terms: Centrifugation
  16. Fulltext The effect of human mesenchymal stem cell on neutrophil oxidative burst
    Ramasamy, R., Krishna, K., Maqbool, M., Vellasamy, S., Sarmadi, V. H., Abdullah, M., et al.
    Malaysian Journal of Medicine and Health Sciences, 2010;6(2):11-17.
    MyJurnal
    Objective: Mesenchymal stem cells (MSC) are multipotent, non-haematopoietic stem cells that are
    capable of differentiating into different varieties of mature cell types such as osteoblasts, chondrocytes, adipocytes, and myoblasts. There is abundant evidence showing that MSC not only affect the differentiation of haematopoietic progenitors, but also the function of mature cells like lymphocytes and neutrophils. However the effect of MSC on neutrophil function and its responses is not well studied. Therefore, this study was conducted to assess the effect of MSC on neutrophil nitric oxide production. Method: Neutrophils from heparanised venous blood were isolated using Ficoll-Hypaque density gradient centrifugation followed by Dextran sedimentation and red blood cell (RBC) lysis. Isolated neutrophils were on average of 97% purity as determined by morphologic analysis. MSC were generated from human bone marrow and characterised by immunophenotyping (monoclonal antibodies CD105, CD73 and CD34) using a flowcytometer. In order to test the effects of MSC on neutrophil function, isolated neutrophils were co-cultured in the presence or absence of MSC at different ratios for 24 and 48 hours. The amount of nitric oxide released was used as an indication of oxidative burst and measured using the Griess assay. Result: The results indicate that MSC neither elevate the NO level when cocultured with resting neutrophils nor alone. However MSC profoundly inhibit the secretion of nitric oxide in PMA stimulated neutrophils after 24hr of incubation. Conclusion: MSC exert an immunomodulatory effect on neutrophil by suppressing neutrophil oxidative burst in vitro.
    Matched MeSH terms: Centrifugation, Density Gradient
  17. Reversible thermo-pneumatic valves on centrifugal microfluidic platforms
    Aeinehvand MM, Ibrahim F, Harun SW, Kazemzadeh A, Rothan HA, Yusof R, et al.
    Lab Chip, 2015 Aug 21;15(16):3358-69.
    PMID: 26158597 DOI: 10.1039/c5lc00634a
    Centrifugal microfluidic systems utilize a conventional spindle motor to automate parallel biochemical assays on a single microfluidic disk. The integration of complex, sequential microfluidic procedures on these platforms relies on robust valving techniques that allow for the precise control and manipulation of fluid flow. The ability of valves to consistently return to their former conditions after each actuation plays a significant role in the real-time manipulation of fluidic operations. In this paper, we introduce an active valving technique that operates based on the deflection of a latex film with the potential for real-time flow manipulation in a wide range of operational spinning speeds. The reversible thermo-pneumatic valve (RTPV) seals or reopens an inlet when a trapped air volume is heated or cooled, respectively. The RTPV is a gas-impermeable valve composed of an air chamber enclosed by a latex membrane and a specially designed liquid transition chamber that enables the efficient usage of the applied thermal energy. Inputting thermo-pneumatic (TP) energy into the air chamber deflects the membrane into the liquid transition chamber against an inlet, sealing it and thus preventing fluid flow. From this point, a centrifugal pressure higher than the induced TP pressure in the air chamber reopens the fluid pathway. The behaviour of this newly introduced reversible valving system on a microfluidic disk is studied experimentally and theoretically over a range of rotational frequencies from 700 RPM to 2500 RPM. Furthermore, adding a physical component (e.g., a hemispherical rubber element) to induce initial flow resistance shifts the operational range of rotational frequencies of the RTPV to more than 6000 RPM. An analytical solution for the cooling of a heated RTPV on a spinning disk is also presented, which highlights the need for the future development of time-programmable RTPVs. Moreover, the reversibility and gas impermeability of the RTPV in the microfluidic networks are validated on a microfluidic disk designed for performing liquid circulation. Finally, an array of RTPVs is integrated into a microfluidic cartridge to enable sequential aliquoting for the conversion of dengue virus RNA to cDNA and the preparation of PCR reaction mixtures.
    Matched MeSH terms: Centrifugation
  18. Fulltext Latex micro-balloon pumping in centrifugal microfluidic platforms
    Aeinehvand MM, Ibrahim F, Harun SW, Al-Faqheri W, Thio TH, Kazemzadeh A, et al.
    Lab Chip, 2014 Mar 07;14(5):988-97.
    PMID: 24441792 DOI: 10.1039/c3lc51116b
    Centrifugal microfluidic platforms have emerged as point-of-care diagnostic tools. However, the unidirectional nature of the centrifugal force limits the available space for multi-step processes on a single microfluidic disc. To overcome this limitation, a passive pneumatic pumping method actuated at high rotational speeds has been previously proposed to pump liquid against the centrifugal force. In this paper, a novel micro-balloon pumping method that relies on elastic energy stored in a latex membrane is introduced. It operates at low rotational speeds and pumps a larger volume of liquid towards the centre of the disc. Two different micro-balloon pumping mechanisms have been designed to study the pump performance at a range of rotational frequencies from 0 to 1500 rpm. The behaviour of the micro-balloon pump on the centrifugal microfluidic platforms has been theoretically analysed and compared with the experimental data. The experimental data show that the developed pumping method dramatically decreases the required rotational speed to pump liquid compared to the previously developed pneumatic pumping methods. It also shows that within a range of rotational speed, a desirable volume of liquid can be stored and pumped by adjusting the size of the micro-balloon.
    Matched MeSH terms: Centrifugation
  19. Fulltext Stability Evaluations of Different Types of Vegetable Oil-based Emulsions
    Teh SS, Mah SH
    J Oleo Sci, 2018;67(11):1381-1387.
    PMID: 30404958 DOI: 10.5650/jos.ess18067
    The study was aimed at evaluating the effects of vegetable oils on emulsion stability. Palm olein (POo), olive oil (OO), safflower oil (SAF), grape seed oil (GSO), soybean oil (SBO) and sunflower oil (SFO) with different degree of saturation levels were chosen as major ingredient of oil phases. All the emulsions were stored at 4℃, 27℃ and 40℃ for 35 days and subjected to all the stability tests, including temperature variation, centrifuge test, cycle test, pH and slip melting point. The results indicated that POo exhibited the highest stability, followed by SAF, OO, GSO, SFO and SBO. In addition, the results implied that the degree of saturation levels of vegetable oils does give significant effect on emulsion stability based on the centrifuge testing for an approximate 30% usage level of oil. The POo-based emulsion exhibited good emulsion stability throughout the experimental period indicated that POo could be a good carrier oil for various applications in cosmetic industry.
    Matched MeSH terms: Centrifugation
  20. Purification of filamentous bacteriophage M13 by expanded bed anion exchange chromatography
    Ling TC, Loong CK, Tan WS, Tey BT, Abdullah WM, Ariff A
    J Microbiol, 2004 Sep;42(3):228-32.
    PMID: 15459653
    In this paper, we investigated the development of a simplified and rapid primary capture step for the recovery of M13 bacteriophage from particulate-containing feedstock. M13 bacteriophage, carrying an insert, was propagated and subsequently purified by the application of both conventional multiple steps and expanded bed anion exchange chromatography. In the conventional method, precipitation was conducted with PEG/NaCl, and centrifugation was also performed. In the single step expanded bed anion exchange adsorption, UpFront FastLine 20 (20 mm i.d.) from UpFront Chromatography was used as the contactor, while 54 ml (Ho = 15 cm) of STREAMLINE DEAE (rho = 1.2 g/cm3) from Amersham Pharmacia Biotechnology was used as the anion exchanger. The performance of the two methods were evaluated, analysed, and compared. It was demonstrated that the purification of the M13 bacteriophage, using expanded bed anion exchange adsorption, yielded the higher recovery percentage, at 82.86%. The conventional multiple step method yielded the lower recovery percentage, 36.07%. The generic application of this integrated technique has also been assessed.
    Matched MeSH terms: Centrifugation
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links