Displaying publications 1 - 20 of 52 in total

Abstract:
Sort:
  1. Nurul Huda Yusoff, Muhamad Mat Salleh, Muhammad Yahaya
    Sains Malaysiana, 2008;37:233-237.
    This research explores the possibility of using fluorescence technique to detect the presence of volatile organic compounds based on a single sensing material. The material used was TiO2 nanoparticles coated with porphyrin dye. The TiO2 nanoparticles colloid is in a sol-gel form synthesized from titanium (IV) ethoxide in ethanol with addition of kalium chloride (KCl) as stabilizer. TiO2 nanoparticles were then coated with porphyrin dye, Manganase (III) 5,10,15,20 tetra (4-pyridyl)-21H, 23H porphine chloride tetrakis (metachloride). The coated nanoparticles were deposited on quartz substrate using self-assembly through dip coating technique. The sensing properties of the thin film toward volatile organic compounds; ethanol, acetone, cyclohexane and 2-propanol were studied using luminescence spectrometer. It was found that the thin film produced different emission spectra peaks for different volatile organic compounds (VOCs). Hence, it eases chemical identification process and potentially be use as fluorescence gas sensor.
    Matched MeSH terms: Luminescence
  2. Moi IM, Roslan NN, Leow ATC, Ali MSM, Rahman RNZRA, Rahimpour A, et al.
    Appl Microbiol Biotechnol, 2017 Jun;101(11):4371-4385.
    PMID: 28497204 DOI: 10.1007/s00253-017-8300-y
    Photobacterium species are Gram-negative coccobacilli which are distributed in marine habitats worldwide. Some species are unique because of their capability to produce luminescence. Taxonomically, about 23 species and 2 subspecies are validated to date. Genomes from a few Photobacterium spp. have been sequenced and studied. They are considered a special group of bacteria because some species are capable of producing essential polyunsaturated fatty acids, antibacterial compounds, lipases, esterases and asparaginases. They are also used as biosensors in food and environmental monitoring and detectors of drown victim, as well as an important symbiont.
    Matched MeSH terms: Luminescence
  3. Kunasegaran T, Mustafa MR, Murugan DD, Achike FI
    Biochimie, 2016 Jun;125:131-9.
    PMID: 27012965 DOI: 10.1016/j.biochi.2016.03.008
    This study investigated the effects of combined minimal concentrations of quercetin and pioglitazone on angiotensin II-induced contraction of the aorta from fructose-streptozotocin (F-STZ)-induced type 2 diabetic rats and the possible role of superoxide anions (O2(-)) and nitric oxide (NO) in their potential therapeutic interaction. Contractile responses to Ang II of aortic rings from Sprague-Dawley (SD) and F-STZ rats were tested following pre-incubation of the tissues in the vehicle (DMSO; 0.05%), quercetin (Q, 0.1 μM), pioglitazone (P, 0.1 μM) or their combination (P + Q; 0.1 μM each). The amount of superoxide anion was evaluated by lucigenin-enhanced chemiluminescence and dihydroethidium fluorescence, and NO by assay of total nitrate/nitrite, and 4-Amino-5-Methylamino-2',7'-Difluorofluorescein (DAF-FM) diacetate. The synergistic reduction of Ang II-induced contraction of diabetic but not normal aorta with minimally effective concentrations of P + Q occurs through inhibiting O2(-) and increasing NO bioavailability. This finding opens the possibility of maximal vascular protective/antidiabetic effects with low dose pioglitazone combined with quercetin, thus minimizing the risk of adverse effects.
    Matched MeSH terms: Luminescence
  4. Nawi SN, Wahib NF, Zulkepely NN, Amin YB, Min UN, Bradley DA, et al.
    Sensors (Basel), 2015;15(8):20557-69.
    PMID: 26307987 DOI: 10.3390/s150820557
    Study has been undertaken of the thermoluminescence (TL) yield of various tailor-made flat cross-section 6 mol% Ge-doped silica fibers, differing only in respect of external dimensions. Key TL dosimetric characteristics have been investigated, including glow curves, dose response, sensitivity, fading and reproducibility. Using a (60)Co source, the samples were irradiated to doses within the range 1 to 10 Gy. Prior to irradiation, the flat fibers were sectioned into 6 mm lengths, weighed, and annealed at 400 °C for 1 h. TL readout was by means of a Harshaw Model 3500 TLD reader, with TLD-100 chips (LiF:Mg, Ti) used as a reference dosimeter to allow the relative response of the fibers to be evaluated. The fibers have been found to provide highly linear dose response and excellent reproducibility over the range of doses investigated, demonstrating high potential as TL-mode detectors in radiation medicine applications. Mass for mass, the results show the greatest TL yield to be provided by fibers of the smallest cross-section, analysis indicating this to be due to minimal light loss in transport of the TL through the bulk of the silica medium.
    Matched MeSH terms: Luminescence*
  5. Eltayeb NE, Teoh SG, Adnan R, Teh JB, Fun HK
    J Fluoresc, 2011 Jul;21(4):1393-400.
    PMID: 21222144 DOI: 10.1007/s10895-010-0822-y
    A series of Zn(II)-Schiff bases I, II and III complexes were synthesized by reaction of o-phenylenediamine with 3-methylsalicylaldehyde, 4-methylsalicylaldehyde and 5-methylsalicylaldehyde. These complexes were characterized using FT-IR, UV-Vis, Diffuse reflectance UV-Vis, elemental analysis and conductivity. Complex III was characterized by XRD single crystal, which crystallizes in the triclinic system, space group P-1, with lattice parameters a=9.5444(2) Å, b=11.9407(2) Å, c=21.1732(3) Å, V=2390.24(7) Å(3), D ( c )=1.408 Mg m(-3), Z=4, F(000)=1050, GOF=0.981, R1=0.0502, wR2=0.1205. Luminescence property of these complexes was investigated in DMF solution and in the solid state. Computational study of the electronic properties of complex III showed good agreement with the experimental data.
    Matched MeSH terms: Luminescence*
  6. Faraj FL, Zahedifard M, Paydar M, Looi CY, Abdul Majid N, Ali HM, et al.
    ScientificWorldJournal, 2014;2014:212096.
    PMID: 25548779 DOI: 10.1155/2014/212096
    Two new synthesized and characterized quinazoline Schiff bases 1 and 2 were investigated for anticancer activity against MCF-7 human breast cancer cell line. Compounds 1 and 2 demonstrated a remarkable antiproliferative effect, with an IC50 value of 6.246×10(-6) mol/L and 5.910×10(-6) mol/L, respectively, after 72 hours of treatment. Most apoptosis morphological features in treated MCF-7 cells were observed by AO/PI staining. The results of cell cycle analysis indicate that compounds did not induce S and M phase arrest in cell after 24 hours of treatment. Furthermore, MCF-7 cells treated with 1 and 2 subjected to apoptosis death, as exhibited by perturbation of mitochondrial membrane potential and cytochrome c release as well as increase in ROS formation. We also found activation of caspases-3/7, -8, and -9 in compounds 1 and 2. Moreover, inhibition of NF-κB translocation in MCF-7 cells treated by compound 1 significantly exhibited the association of extrinsic apoptosis pathway. Acute toxicity results demonstrated the nontoxic nature of the compounds in mice. Our results showed significant activity towards MCF-7 cells via either intrinsic or extrinsic mitochondrial pathway and are potential candidate for further in vivo and clinical breast cancer studies.
    Matched MeSH terms: Luminescence
  7. Ting T, Crouse K, Ahmad H
    Sains Malaysiana, 2015;44:619-628.
    Three novel ruthenium(II) complexes of the general formula [Ru(II)(bpy)2
    L]2+ were synthesized, where L =
    1,10-phenanthroline derivatives of position 2 imidazole having 3,4-didecyloxy-phenyl (ddip), 3,4-ditetradecyloxy-phenyl
    (dtip) and 3,4-dihexadecyloxy-phenyl (dhip). All complexes were characterized by elemental analysis, 1
    H-NMR and ESI-MS.
    Their photophysical properties have also been studied by UV-visible spectroscopy and fluorescence spectroscopy. The
    complexes exhibit Ru(II) metal centered emission at approximately 610 nm in acetonitrile solution at room temperature. DNA
    binding studies were carried out by UV-visible titration, luminescence titration and viscosity studies. The results indicated
    that [Ru(bpy)2
    (ddip)]2+ binds to CT-DNA by partial intercalation mode, while [Ru(bpy)2
    (dtip)]2+ and [Ru(bpy)2
    (dhip)]2+
    bind intercalatively via extended ligands.
    Matched MeSH terms: Luminescence
  8. Al-Douri Y, Badi N, Voon CH
    Luminescence, 2018 Mar;33(2):260-266.
    PMID: 29024360 DOI: 10.1002/bio.3408
    Carbon-based quantum dots (C-QDs) were synthesized through microwave-assisted carbonization of an aqueous starch suspension mediated by sulphuric and phosphoric acids. The as-prepared C-QDs showed blue, green and yellow luminescence without the addition of any surface-passivating agent. The C-QDs were further analyzed by UV-vis spectroscopy to measure the optical response of the organic compound. The energy gaps revealed narrow sizing of C-QDs in the semiconductor range. The optical refractive index and dielectric constant were investigated. The C-QDs size distribution was characterized. The results suggested an easy route to the large scale production of C-QDs materials.
    Matched MeSH terms: Luminescence
  9. Bukhari SN, Jantan I, Wai LK, Lajis NH, Abbas F, Jasamai M
    Med Chem, 2013 Dec;9(8):1091-8.
    PMID: 23092331
    A series of novel isoxazole and pyrazoline derivatives has been synthesized and evaluated for their effects on the chemiluminescence and chemotactic activity of human phagocytes. Their effects on the chemotactic migration of isolated polymorphonuclear leukocytes (PMNs) and on the release of reactive oxygen species (ROS) during respiratory burst of human whole blood and PMNs were carried out using the Boyden chamber technique and luminol-based chemiluminescence assay, respectively. Of the compounds tested, compounds 8, 9, 11 and 12 exhibited higher inhibitory activity on the release of ROS (with IC50 values ranging from 5.6 to 8.4 μM) than acetylsalicylic acid (IC50 = 9.5 μ M). These compounds also showed strong inhibitory activity on the migration of PMNs with compound 8 exhibiting an IC50 value lower than that of ibuprofen. The results suggest that some of these isoxazole and pyrazoline derivatives have ability to modulate the innate immune response of phagocytes at different steps, indicating their potential as a source of new immunomodulatory agents.
    Matched MeSH terms: Luminescence
  10. Bradley DA, Nawi SNM, Khandaker MU, Almugren KS, Sani SFA
    Appl Radiat Isot, 2020 Jul;161:109168.
    PMID: 32321700 DOI: 10.1016/j.apradiso.2020.109168
    Present work concerns polymer pencil-lead graphite (PPLG) and the potential use of these in elucidating irradiation-driven structural alterations. The study provides detailed analysis of radiation-induced structural interaction changes and the associated luminescence that originates from the energy absorption. Thermally stimulated emission from the different occupied defect energy levels reflects the received radiation dose, different for the different diameter PPLGs. The PPLG samples have been exposed to photon irradiation, specifically x-ray doses ranging from 1 to 10 Gy, extended to 30-200 Gy through use of a60Co gamma-ray source. Trapping parameters such as order of kinetics, activation energy and frequency factor are estimated using Chen's peak-shape method for a fixed-dose of 30 Gy. X-ray diffractometry was used to characterize the crystal structure of the PPLG, the aim being to identify the degree of structural order, atomic spacing and lattice constants of the various irradiated PPLG samples. The mean atomic spacing and degree of structural order for the different diameter PPLG are found to be 0.3332 nm and 26.6° respectively. Photoluminescence spectra from PPLG arising from diode laser excitation at 532 nm consist of two adjacent peaks, 602 nm (absorption) and 1074 nm (emission), with mean energy band gap values within the range 1.113-1.133 eV.
    Matched MeSH terms: Luminescence
  11. Leow T, Leong P, Eeu T, Ibrahim Z, Hussin R
    Sains Malaysiana, 2014;43:929-934.
    Study of a series of lead lithium borophosphate glass samples was performed to determine the structural and luminescence properties. The glass samples containing the composition of 20Pb0-xLi20-30B 20 3-(50-x)P 20 5-2TiO 2 (where x = 0, 5, 10, 15, 20) system were prepared using melt-quenching technique. The Pb0-Li20-B 20 3-P20 5-Ti0 2 samples were investigated for structural properties using Fourier transform infrared and photoluminescence spectroscopy for studies of luminescence properties. The results from FTIR showed the presence of trigonal and tetrahedral PO4' PO3, BO4 and B03 groups within the host network structure. The samples exhibit luminescence emission centered at 420, 482 and 496 nm when excited at 300 nm wavelength. The emission peak at 420 nm were assigned to F center emission and charge-transfer transition of Ti4+ ions. The results showed that emission intensity was dependent on lithium contents in Ti-doped lead lithium borophosphate glass composition.
    Matched MeSH terms: Luminescence
  12. Leong PM, Eeu TY, Leow TQ, Pang XG, Zuhairi Ibrahim, Rosli Hussin
    Sains Malaysiana, 2014;43:915-922.
    Structural and luminescence properties of borophosphate glasses with different modifier doped with transition metal ions have been investigated in this study. The glass sample from the series of xPb 30 4:0 .2Sb20 3:0.3B 20 3:(0 .5-x)P 20 5 and ySb 20 3:0 .2Pb 30 4:(0 .5-y)B 20 3:0 .3P 20 5where x 20 mol% and 0 y 0 .1 5mol% , respectively, were doped with 0.01 mol% of Fe 20 3 system have been prepared using the melt-quenching technique. The structural properties of samples had been studied using fourier transform infrared (FT-m) spectroscopy. The FT-IR study showed the network structure of the studied glasses based on the B 20 3-P 20 5host with the 5b203 and Pb203 modifiers. The results of FT-IR showed traces of B03 and B04 with the introduction of 5b203 and Pb203 modifiers. With the increasing content of B203 which replacing content of P205 in the glass network, the intensity of the borate band decreases and shifted to lower frequency. uv-Vis spectroscopy analysed the transition of Fe3+ from ground state to excited state in the ultraviolet spectral region. The photoluminescence of samples were studied using photoluminescence spectroscopy. The result of photoluminescence spectroscopy showed the effect of photoluminescence enhancement by doping Fe3+ as activator.
    Matched MeSH terms: Luminescence
  13. Aziz SB, Hassan AQ, Mohammed SJ, Karim WO, Kadir MFZ, Tajuddin HA, et al.
    Nanomaterials (Basel), 2019 Feb 06;9(2).
    PMID: 30736346 DOI: 10.3390/nano9020216
    : In this work the influence of carbon nano-dots (CNDs) on absorption of ultra violet (UV) spectra in hybrid PVA based composites was studied. The FTIR results reveal the complex formation between PVA and CNDs. The shifting was observed in XRD spectrum of PVA:CNDs composites compared to pure PVA. The Debye-Scherrer formula was used to calculate the crystallite size of CNDs and crystalline phases of pure PVA and PVA:CNDs composites. The FESEM images emphasized the presence and dispersion of C-dots on the surface of the composite samples. From the images, a strong and clear absorption was noticed in the spectra. The strong absorption that appeared peaks at 280 nm and 430 nm can be ascribed to the n-π* and π-π* transitions, respectively. The absorption edge shifted to lower photon energy sides with increasing CNDs. The luminescence behavior of PVA:CNDs composite was confirmed using digital and photo luminescence (PL) measurements. The optical dielectric constant which is related to the density of states was studied and the optical band gap was characterized accurately using optical dielectric loss parameter. The Taucs model was used to determine the type of electronic transition in the samples.
    Matched MeSH terms: Luminescence
  14. Siti Farhana Zakaria, Millington, Keith R.
    MyJurnal
    Polymers and organic materials that are exposed to sunlight undergo photooxidation, which leads to deterioration of their physical properties. To allow adequate performance under outdoor conditions, synthetic polymers require additives such as antioxidants and UV absorbers. A major problem with optimising polymer formulations to maximise their working life span is that accelerated weathering tests are empirical. The conditions differ significantly from real weathering situations, and samples require lengthy irradiation period. Degradation may not be apparent in the early stages of exposure, although this is when products such as hydroperoxides are formed which later cause acceleration of oxidation. A simple way of quantifying the number of free radicals presents in organic materials following exposure to light or heat is by measuring chemiluminescence (CL) emission. Most polymers emit CL when they undergo oxidative degradation, and it originates from the bimolecular reaction of macroperoxy radicals which creates an excited carbonyl.
    Matched MeSH terms: Luminescence
  15. Tan LY, Yin WF, Chan KG
    Sensors (Basel), 2012;12(4):4339-51.
    PMID: 22666033 DOI: 10.3390/s120404339
    Quorum sensing regulates bacterial virulence determinants, therefore making it an interesting target to attenuate pathogens. In this work, we screened edible, endemic plants in Malaysia for anti-quorum sensing properties. Extracts from Melicope lunu-ankenda (Gaertn.) T. G. Hartley, a Malay garden salad, inhibited response of Chromobacterium violaceum CV026 to N-hexanoylhomoserine lactone, thus interfering with violacein production; reduced bioluminescence expression of E. coli [pSB401], disrupted pyocyanin synthesis, swarming motility and expression of lecA::lux of Pseudomonas aeruginosa PAO1. Although the chemical nature of the anti-QS compounds from M. lunu-ankenda is currently unknown, this study proves that endemic Malaysian plants could serve as leads in the search for anti-quorum sensing compounds.
    Matched MeSH terms: Luminescence
  16. Lai LL, Chan WK, Sthaneshwar P, Nik Mustapha NR, Goh KL, Mahadeva S
    PLoS One, 2017;12(4):e0174982.
    PMID: 28369100 DOI: 10.1371/journal.pone.0174982
    Wisteria floribunda agglutinin-positive Mac-2 binding protein (WFA+-M2BP) has been suggested to be useful for the assessment of disease severity in non-alcoholic fatty liver disease (NAFLD). Consecutive adult NAFLD patients who had a liver biopsy were included. Serum WFA+-M2BP level was measured using a lectin-antibody sandwich immunoassay using a chemiluminescence enzyme immunoassay machine (HISCL-5000, Sysmex, Kobe, Japan). The measured levels were indexed using the following equation: Cut-off index (COI) = ([WFA+-M2BP]sample-[WFA+-M2BP]NC) / ([WFA+-M2BP]PC-[WFA+-M2BP]NC), where PC = positive control and NC = negative control. Histopathological examination of liver biopsy specimen was reported according to Non-Alcoholic Steatohepatitis (NASH) Clinical Research Network Scoring System. Data for 220 cases were analyzed. The AUROC of the COI for the diagnosis of NASH was 0.65. The AUROC of the COI for the diagnosis of steatosis grade ≥2 and 3 was 0.64 and 0.53, respectively. The AUROC of the COI for the diagnosis of lobular inflammation grade ≥1, ≥2 and 3 was 0.57, 0.68 and 0.59, respectively. The AUROC of the COI for the diagnosis of hepatocyte ballooning grade ≥1 and 2 was 0.64 and 0.65, respectively. The AUROC of the COI for the diagnosis of fibrosis stage ≥1, ≥2, ≥3 and 4 was 0.61, 0.71, 0.74 and 0.84, respectively. Out of the 220 cases, 152 cases were the same 76 patients who had a repeat liver biopsy after 48 weeks of intervention. The AUROC of the change in the COI to detect improvement in steatosis, lobular inflammation, hepatocyte ballooning and fibrosis was 0.57, 0.54, 0.59 and 0.52, respectively. In conclusion, serum WFA+-M2BP was most useful for the diagnosis of significant fibrosis, advanced fibrosis and cirrhosis in NAFLD patients. However, it was less useful for differentiating NASH from non-NASH, and for diagnosis and follow-up of the individual histopathological components of NASH.
    Matched MeSH terms: Luminescence
  17. Ghomeishi M, Mahdiraji GA, Adikan FR, Ung NM, Bradley DA
    Sci Rep, 2015;5:13309.
    PMID: 26314683 DOI: 10.1038/srep13309
    With interest in the potential of optical fibres as the basis of next-generation thermoluminescence dosimeters (TLDs), the development of suitable forms of material and their fabrication has become a fast-growing endeavour. Present study focuses on three types of Ge-doped optical fibres with different structural arrangements and/or shapes, namely conventional cylindrical fibre, capillary fibre, and flat fibre, all fabricated using the same optical fibre preform. For doses from 0.5 to 8 Gy, obtained at electron and photon energies, standard thermoluminescence (TL) characteristics of the optical fibres have been the subject of detailed investigation. The results show that in collapsing the capillary fibre into a flat shape, the TL yield is increased by a factor of 5.5, the yield being also some 3.2 times greater than that of the conventional cylindrical fibre fabricated from the same perform. This suggests a means of production of suitably sensitive TLD for in-vivo dosimeter applications. Addressing the associated defects generating luminescence from each of the optical fibres, the study encompasses analysis of the TL glow curves, with computerized glow curve deconvolution (CGCD) and 2(nd) order kinetics.
    Matched MeSH terms: Luminescence
  18. Liu M, Li H, Bai L, Zheng K, Zhao Z, Chen Z, et al.
    J Hazard Mater, 2021 07 05;413:125291.
    PMID: 33588337 DOI: 10.1016/j.jhazmat.2021.125291
    Real-time and visual monitoring of pollutants in the air is of great importance since they are usually cannot be seen, smelled, or touched. Lanthanide nano-cluster is a kind of luminescent sensor for various species. However, controlling synthesis of lanthanide nano-cluster remains experimentally challenging. In this work, four series of lanthanide-barium (Ln-Ba) nano-clusters of Dy2Ba (1), Tb2Ba2 (2), Ln4Ba3 (Ln = Tb, 3a; Eu, 3b), Tb4Ba4 (4) were assembled through precisely controlling the pH of the reactant solutions. The work features the first example that the number of cluster's nuclei changes regularly with the pH. Moreover, investigation reveals that nano-cluster 3a is a highly selective and sensitive sensor towards acetylacetone (acac) and aniline. Interestingly, easy-to-use sensing devices of test paper, agarose gel, and five kinds of film on CaCO3, polyfoam, coin, mask, and wall that based on 3a were fabricated by facile methods. The seven sensing devices showed remarkable ability to sense aniline and acac vapors with visibility to the naked eyes. This is the first work on multiple real-time and visual sensing devices based on the lanthanide nano-cluster.
    Matched MeSH terms: Luminescence
  19. Halmi, M.I.E.
    MyJurnal
    The rise in pollution cases globally is expected to increase in line with industrialization.
    Monitoring activities for pollutants have been hampered by the astronomical costs of
    instrumental-based approach. This has resulted in the intense research on low cost
    biomonitoring systems using enzymes, organisms including microorganisms. Only positive
    samples are sent for instrumental analysis; dramatically cutting the cost of instrumental
    analysis. This review attempts to outline and give due recognition to several selected bioassay
    systems that have been tested for their applicability using polluted water samples as a routine
    first line-of-defense. This includes small aquatic organisms-based assays, enzymes especially
    proteases and bacterial-based systems using respiratory dye or luminescence systems as a
    method for toxicant detection.
    Matched MeSH terms: Luminescence
  20. Lam SE, Mat Nawi SN, Abdul Sani SF, Khandaker MU, Bradley DA
    Sci Rep, 2021 04 12;11(1):7939.
    PMID: 33846448 DOI: 10.1038/s41598-021-86942-4
    Preliminary study has been made of black human hair, carbon concentration of some 53%, a model in examining the potential of hair of the human head in retrospective and emergency biodosimetry applications, also offering effective atomic number near to that of water. The hair samples were exposed to [Formula: see text]Co gamma rays, delivering doses from 0 to 200 Gy. Structural alterations were observed, use being made of Raman and photoluminescence (PL) spectroscopy. Most prominent among the features observed in the first-order Raman spectra are the D and G peaks, appearing at 1370 [Formula: see text] and 1589 [Formula: see text] respectively, the intensity ratio [Formula: see text] indicating dose-dependent defects generation and annealing of structural alterations. The wavelengths of the PL absorption and emission peaks are found to be centred at [Formula: see text] nm and [Formula: see text] nm, respectively. The hair samples mean band gap energy ([Formula: see text]) post-irradiation was found to be [Formula: see text] eV, of the order of a semiconductor and approximately two times the [Formula: see text] of other carbon-rich materials reported via the same methodology.
    Matched MeSH terms: Luminescence*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links