MyMedR

Displaying publications 1 - 20 of 67 in total

Abstract:

Sort:

Fulltext Automatic frequency controller for power amplifiers used in bio-implanted applications: issues and challenges

Hannan MA, Hussein HA, Mutashar S, Samad SA, Hussain A

Sensors (Basel), 2014;14(12):23843-70.
PMID: 25615728 DOI: 10.3390/s141223843

With the development of communication technologies, the use of wireless systems in biomedical implanted devices has become very useful. Bio-implantable devices are electronic devices which are used for treatment and monitoring brain implants, pacemakers, cochlear implants, retinal implants and so on. The inductive coupling link is used to transmit power and data between the primary and secondary sides of the biomedical implanted system, in which efficient power amplifier is very much needed to ensure the best data transmission rates and low power losses. However, the efficiency of the implanted devices depends on the circuit design, controller, load variation, changes of radio frequency coil's mutual displacement and coupling coefficients. This paper provides a comprehensive survey on various power amplifier classes and their characteristics, efficiency and controller techniques that have been used in bio-implants. The automatic frequency controller used in biomedical implants such as gate drive switching control, closed loop power control, voltage controlled oscillator, capacitor control and microcontroller frequency control have been explained. Most of these techniques keep the resonance frequency stable in transcutaneous power transfer between the external coil and the coil implanted inside the body. Detailed information including carrier frequency, power efficiency, coils displacement, power consumption, supplied voltage and CMOS chip for the controllers techniques are investigated and summarized in the provided tables. From the rigorous review, it is observed that the existing automatic frequency controller technologies are more or less can capable of performing well in the implant devices; however, the systems are still not up to the mark. Accordingly, current challenges and problems of the typical automatic frequency controller techniques for power amplifiers are illustrated, with a brief suggestions and discussion section concerning the progress of implanted device research in the future. This review will hopefully lead to increasing efforts towards the development of low powered, highly efficient, high data rate and reliable automatic frequency controllers for implanted devices.

Matched MeSH terms: Radio Waves
Fulltext Analysis of glass-reinforced epoxy material for radio frequency resonator

Zaman MR, Islam MT, Misran N, Yatim B

ScientificWorldJournal, 2014;2014:831435.
PMID: 24977230 DOI: 10.1155/2014/831435

A radio frequency (RF) resonator using glass-reinforced epoxy material for C and X band is proposed in this paper. Microstrip line technology for RF over glass-reinforced epoxy material is analyzed. Coupling mechanism over RF material and parasitic coupling performance is explained utilizing even and odd mode impedance with relevant equivalent circuit. Babinet's principle is deployed to explicate the circular slot ground plane of the proposed resonator. The resonator is designed over four materials from different backgrounds which are glass-reinforced epoxy, polyester, gallium arsenide (GaAs), and rogers RO 4350B. Parametric studies and optimization algorithm are applied over the geometry of the microstrip resonator to achieve dual band response for C and X band. Resonator behaviors for different materials are concluded and compared for the same structure. The final design is fabricated over glass-reinforced epoxy material. The fabricated resonator shows a maximum directivity of 5.65 dBi and 6.62 dBi at 5.84 GHz and 8.16 GHz, respectively. The lowest resonance response is less than -20 dB for C band and -34 dB for X band. The resonator is prototyped using LPKF (S63) drilling machine to study the material behavior.

Matched MeSH terms: Radio Waves
Fulltext Development of simple designs of multitip probe diagnostic systems for RF plasma characterization

Naz MY, Shukrullah S, Ghaffar A, Rehman NU

ScientificWorldJournal, 2014;2014:279868.
PMID: 24683326 DOI: 10.1155/2014/279868

Multitip probes are very useful diagnostics for analyzing and controlling the physical phenomena occurring in low temperature discharge plasmas. However, DC biased probes often fail to perform well in processing plasmas. The objective of the work was to deduce simple designs of DC biased multitip probes for parametric study of radio frequency plasmas. For this purpose, symmetric double probe, asymmetric double probe, and symmetric triple probe diagnostic systems and their driving circuits were designed and tested in an inductively coupled plasma (ICP) generated by a 13.56 MHz radio frequency (RF) source. Using I-V characteristics of these probes, electron temperature, electron number density, and ion saturation current was measured as a function of input power and filling gas pressure. An increasing trend was noticed in electron temperature and electron number density for increasing input RF power whilst a decreasing trend was evident in these parameters when measured against filling gas pressure. In addition, the electron energy probability function (EEPF) was also studied by using an asymmetric double probe. These studies confirmed the non-Maxwellian nature of the EEPF and the presence of two groups of the energetic electrons at low filling gas pressures.

Matched MeSH terms: Radio Waves
Based Medical Systems for Patient's Authentication: Towards a New Verification Secure Framework Using CIA Standard

Mohsin AH, Zaidan AA, Zaidan BB, Albahri OS, Albahri AS, Alsalem MA, et al.

J Med Syst, 2019 May 22;43(7):192.
PMID: 31115768 DOI: 10.1007/s10916-019-1264-y

In medical systems for patient's authentication, keeping biometric data secure is a general problem. Many studies have presented various ways of protecting biometric data especially finger vein biometric data. Thus, It is needs to find better ways of securing this data by applying the three principles of information security aforementioned, and creating a robust verification system with high levels of reliability, privacy and security. Moreover, it is very difficult to replace biometric information and any leakage of biometrics information leads to earnest risks for example replay attacks using the robbed biometric data. In this paper presented criticism and analysis to all attempts as revealed in the literature review and discussion the proposes a novel verification secure framework based confidentiality, integrity and availability (CIA) standard in triplex blockchain-particle swarm optimization (PSO)-advanced encryption standard (AES) techniques for medical systems patient's authentication. Three stages are performed on discussion. Firstly, proposes a new hybrid model pattern in order to increase the randomization based on radio frequency identification (RFID) and finger vein biometrics. To achieve this, proposed a new merge algorithm to combine the RFID features and finger vein features in one hybrid and random pattern. Secondly, how the propose verification secure framework are followed the CIA standard for telemedicine authentication by combination of AES encryption technique, blockchain and PSO in steganography technique based on proposed pattern model. Finally, discussed the validation and evaluation of the proposed verification secure framework.

Matched MeSH terms: Radio Frequency Identification Device
Analysis on the effect of the distances and inclination angles between human head and mobile phone on SAR

Hossain MI, Faruque MR, Islam MT

Prog Biophys Mol Biol, 2015 Nov;119(2):103-10.
PMID: 25863147 DOI: 10.1016/j.pbiomolbio.2015.03.008

The aim of this paper is to investigate the effects of the distances between the human head and internal cellular device antenna on the specific absorption rate (SAR). This paper also analyzes the effects of inclination angles between user head and mobile terminal antenna on SAR values. The effects of the metal-glass casing of mobile phone on the SAR values were observed in the vicinity of the human head model. Moreover, the return losses were investigated in all cases to mark antenna performance. This analysis was performed by adopting finite-difference time-domain (FDTD) method on Computer Simulation Technology (CST) Microwave Studio. The results indicate that by increasing the distance between the user head and antenna, SAR values are decreased. But the increase in inclination angle does not reduce SAR values in all cases. Additionally, this investigation provides some useful indication for future design of low SAR mobile terminal antenna.

Matched MeSH terms: Radio Waves
A low cost solution for post-biopsy complications using available RFA generator and coaxial core biopsy needle

Azlan CA, Mohd Nasir NF, Saifizul AA, Faizul MS, Ng KH, Abdullah BJ

Australas Phys Eng Sci Med, 2007 Dec;30(4):288-91.
PMID: 18274069

Percutaneous image-guided needle biopsy is typically performed in highly vascular organs or in tumours with rich macroscopic and microscopic blood supply. The main risks related to this procedure are haemorrhage and implantation of tumour cells in the needle tract after the biopsy needle is withdrawn. From numerous conducted studies, it was found that heating the needle tract using alternating current in radiofrequency (RF) range has a potential to minimize these effects. However, this solution requires the use of specially designed needles, which would make the procedure relatively expensive and complicated. Thus, we propose a simple solution by using readily available coaxial core biopsy needles connected to a radiofrequency ablation (RFA) generator. In order to do so, we have designed and developed an adapter to interface between these two devices. For evaluation purpose, we used a bovine liver as a sample tissue. The experimental procedure was done to study the effect of different parameter settings on the size of coagulation necrosis caused by the RF current heating on the subject. The delivery of the RF energy was varied by changing the values for delivered power, power delivery duration, and insertion depth. The results showed that the size of the coagulation necrosis is affected by all of the parameters tested. In general, the size of the region is enlarged with higher delivery of RF power, longer duration of power delivery, and shallower needle insertion and become relatively constant after a certain value. We also found that the solution proposed provides a low cost and practical way to minimizes unwanted post-biopsy effects.

Matched MeSH terms: Radio Waves/therapeutic use*
Radiofrequency electromagnetic radiation-induced behavioral changes and their possible basis

Narayanan SN, Jetti R, Kesari KK, Kumar RS, Nayak SB, Bhat PG

Environ Sci Pollut Res Int, 2019 Oct;26(30):30693-30710.
PMID: 31463749 DOI: 10.1007/s11356-019-06278-5

The primary objective of mobile phone technology is to achieve communication with any person at any place and time. In the modern era, it is impossible to ignore the usefulness of mobile phone technology in cases of emergency as many lives have been saved. However, the biological effects they may have on humans and other animals have been largely ignored and not been evaluated comprehensively. One of the reasons for this is the speedy uncontrollable growth of this technology which has surpassed our researching ability. Initiated with the first generation, the mobile telephony currently reaches to its fifth generation without being screened extensively for any biological effects that they may have on humans or on other animals. Mounting evidences suggest possible non-thermal biological effects of radiofrequency electromagnetic radiation (RF-EMR) on brain and behavior. Behavioral studies have particularly concentrated on the effects of RF-EMR on learning, memory, anxiety, and locomotion. The literature analysis on behavioral effects of RF-EMR demonstrates complex picture with conflicting observations. Nonetheless, numerous reports suggest a possible behavioral effect of RF-EMR. The scientific findings about this issue are presented in the current review. The possible neural and molecular mechanisms for the behavioral effects have been proposed in the light of available evidences from the literature.

Matched MeSH terms: Radio Waves*
Radio frequency electromagnetic radiation (RF-EMR) from GSM (0.9/1.8GHz) mobile phones induces oxidative stress and reduces sperm motility in rats

Mailankot M, Kunnath AP, Jayalekshmi H, Koduru B, Valsalan R

Clinics (Sao Paulo), 2009;64(6):561-5.
PMID: 19578660

INTRODUCTION: Mobile phones have become indispensable in the daily lives of men and women around the globe. As cell phone use has become more widespread, concerns have mounted regarding the potentially harmful effects of RF-EMR from these devices.
OBJECTIVE: The present study was designed to evaluate the effects of RF-EMR from mobile phones on free radical metabolism and sperm quality.
MATERIALS AND METHODS: Male albino Wistar rats (10-12 weeks old) were exposed to RF-EMR from an active GSM (0.9/1.8 GHz) mobile phone for 1 hour continuously per day for 28 days. Controls were exposed to a mobile phone without a battery for the same period. The phone was kept in a cage with a wooden bottom in order to address concerns that the effects of exposure to the phone could be due to heat emitted by the phone rather than to RF-EMR alone. Animals were sacrificed 24 hours after the last exposure and tissues of interest were harvested.
RESULTS: One hour of exposure to the phone did not significantly change facial temperature in either group of rats. No significant difference was observed in total sperm count between controls and RF-EMR exposed groups. However, rats exposed to RF-EMR exhibited a significantly reduced percentage of motile sperm. Moreover, RF-EMR exposure resulted in a significant increase in lipid peroxidation and low GSH content in the testis and epididymis.
CONCLUSION: Given the results of the present study, we speculate that RF-EMR from mobile phones negatively affects semen quality and may impair male fertility.

Matched MeSH terms: Radio Waves/adverse effects*
Fulltext Wireless displacement sensing of micromachined spiral-coil actuator using resonant frequency tracking

Ali MS, AbuZaiter A, Schlosser C, Bycraft B, Takahata K

Sensors (Basel), 2014 Jul 10;14(7):12399-409.
PMID: 25014100 DOI: 10.3390/s140712399

This paper reports a method that enables real-time displacement monitoring and control of micromachined resonant-type actuators using wireless radiofrequency (RF). The method is applied to an out-of-plane, spiral-coil microactuator based on shape-memory-alloy (SMA). The SMA spiral coil forms an inductor-capacitor resonant circuit that is excited using external RF magnetic fields to thermally actuate the coil. The actuation causes a shift in the circuit's resonance as the coil is displaced vertically, which is wirelessly monitored through an external antenna to track the displacements. Controlled actuation and displacement monitoring using the developed method is demonstrated with the microfabricated device. The device exhibits a frequency sensitivity to displacement of 10 kHz/µm or more for a full out-of-plane travel range of 466 µm and an average actuation velocity of up to 155 µm/s. The method described permits the actuator to have a self-sensing function that is passively operated, thereby eliminating the need for separate sensors and batteries on the device, thus realizing precise control while attaining a high level of miniaturization in the device.

Matched MeSH terms: Radio Waves
A review on technologies and their usage in solid waste monitoring and management systems: Issues and challenges

Hannan MA, Abdulla Al Mamun M, Hussain A, Basri H, Begum RA

Waste Manag, 2015 Sep;43:509-23.
PMID: 26072186 DOI: 10.1016/j.wasman.2015.05.033

In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challenges towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system.

Matched MeSH terms: Radio Frequency Identification Device
Factor affecting on the movement of protein across the blood: brain: C.S.F. barriers in Plasmodium knowlesi infected Macaca mulatta

Migasena P, Maegraith BG

Med J Malaya, 1968 Mar;22(3):251.
PMID: 4234389
Matched MeSH terms: Serum Albumin, Radio-Iodinated
Fulltext Effects of low-powered RF sweep between 0.01-20 GHz on female Aedes Aegypti mosquitoes: A collective behaviour analysis

Poh AH, Moghavvemi M, Shafiei MM, Leong CS, Lau YL, Mahamd Adikan FR, et al.

PLoS One, 2017;12(6):e0178766.
PMID: 28582398 DOI: 10.1371/journal.pone.0178766

There are many products claiming to be an electronic solution towards repelling mosquitoes. Several reviews were published in debunking these claims. However, there is a lack of a systematic study on effects of electromagnetic (EM) or more specifically, radio frequency (RF) waves against mosquitoes due to the conclusions made in those years. Therefore, we attempt to establish a fundamental study on female Aedes Aegypti (Linnaeus) mosquitoes by quantifying the collective behavior of the mosquitoes against a continuous stream of low-powered RF signals via a broadband horn antenna using image processing methods. By examining the average lateral and vertical positions of the mosquitoes versus frequency and time, the data shows negligible consistency in the reactions of the mosquitoes toward the different frequencies ranging from 10 to 20,000.00 MHz, with a step of 10 MHz. This was done by examining 33 hours of spatiotemporal data, which was divided into three sessions. All three sessions showed totally different convolutions in the positions in arbitrary units based on the raster scan of the image processing output. Several frequencies apparently showed up to 0.2-70% shift in both lateral and vertical components along the spectrum, without repeatability for all three sessions. This study contributes to the following: A pilot study for establishing the collective effects of RF against mosquitoes, open-source use, and finally a low-cost and easily adaptable platform for the study of EM effects against any insects.

Matched MeSH terms: Radio Waves
In-Line Sorting of Harumanis Mango Based on External Quality Using Visible Imaging

Ibrahim MF, Ahmad Sa'ad FS, Zakaria A, Md Shakaff AY

Sensors (Basel), 2016 Oct 27;16(11).
PMID: 27801799

The conventional method of grading Harumanis mango is time-consuming, costly and affected by human bias. In this research, an in-line system was developed to classify Harumanis mango using computer vision. The system was able to identify the irregularity of mango shape and its estimated mass. A group of images of mangoes of different size and shape was used as database set. Some important features such as length, height, centroid and parameter were extracted from each image. Fourier descriptor and size-shape parameters were used to describe the mango shape while the disk method was used to estimate the mass of the mango. Four features have been selected by stepwise discriminant analysis which was effective in sorting regular and misshapen mango. The volume from water displacement method was compared with the volume estimated by image processing using paired t-test and Bland-Altman method. The result between both measurements was not significantly different (P > 0.05). The average correct classification for shape classification was 98% for a training set composed of 180 mangoes. The data was validated with another testing set consist of 140 mangoes which have the success rate of 92%. The same set was used for evaluating the performance of mass estimation. The average success rate of the classification for grading based on its mass was 94%. The results indicate that the in-line sorting system using machine vision has a great potential in automatic fruit sorting according to its shape and mass.

Matched MeSH terms: Radio Frequency Identification Device
Wirelessly activated device with an integrated ionic polymer metal composite (IPMC) cantilever valve for targeted drug delivery

Cheong HR, Nguyen NT, Khaw MK, Teoh BY, Chee PS

Lab Chip, 2018 10 09;18(20):3207-3215.
PMID: 30229248 DOI: 10.1039/c8lc00776d

This paper reports a wirelessly powered ionic polymer-metal composite (IPMC) soft actuator operated by external radio frequency (RF) magnetic fields for targeted drug delivery. A 183 μm thick IPMC cantilever valve was fitted with an embedded LC resonant circuit to wirelessly control the actuator when the field frequency is tuned to its resonant frequency of approximately 25 MHz. Experimental characterization of the fabricated actuator showed a cumulative cantilever deflection of 160 μm for three repeated RF ON-OFF cycles at 0.6 W input power. The device was loaded with a dye solution and immersed in DI water to demonstrate wireless drug release. The qualitative result shows the successful release of the dye solution from the device reservoir. The release rate can be controlled by tuning the RF input power. We achieved a maximum average release rate of ∼0.1 μl s-1. We further conducted an in vitro study with human tumor cells (HeLa) to demonstrate the proof of concept of the developed device. The experiments show promising results towards the intended drug delivery application.

Matched MeSH terms: Radio Waves
Effects of the nitric acid concentrations on the etching process, structural and optical properties of porous zinc oxide thin films

C.G. Ching, Leonard Lu, C.I. Ang, P.K. Ooi, S.S. Ng, Z. Hassan, et al.

Sains Malaysiana, 2013;42:1327-1332.

The present study reports on the fabrication of porous zinc oxide by wet chemical etching. ZnO thin films were deposited via radio-frequency magnetron sputtering on p-type silicon with (111) preferred orientation. The etchants used in the present work were 0.1% and 1.0% nitric acid (HNO3) solutions. ZnO were etched at various times and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) spectroscopy to allow the examination of their structural and optical properties. The XRD results revealed that the intensity of ZnO(002) decreased when the thin films were etched in varying HNO3 concentrations over different periods of time. The above observation is attributed to the dissolution of the ZnO(002). The SEM images showed that the thickness of the ZnO layers decreased over the etching time, which resulted from the isotropic etching by the HNO3 solution. The PL emission intensity initially increased with increasing etching time. However, with further etching of the samples, the PL spectra showed a decreasing trend in intensity as a result of the decrease in the surface-to-volume ratio. All results lead to the conclusion that 1.0% HNO3 has the capability to change the ZnO surface significantly.

Matched MeSH terms: Radio Waves
Effect of radio frequency power on a-cnx film properties and its performance as humidity sensors

Rozidawati Awang, Noorain Purhanudin, Nur Sakinah Salman

Sains Malaysiana, 2018;47:2863-2867.

A series of amorphous carbon nitride (a-CNx) thin films were deposited on silicon (111) substrates using a home-built
radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) system. The a-CNx thin films were deposited
from a mixture of a fixed flow-rate of ethane (C2
H6
, 20 sccm) and nitrogen (N2
, 47 sccm) gases with varying RF power. A
higher ratio of C to H (C to H ratio is 1:3) atoms in C2
H6
as compared to the ratio in methane (CH4
) gas (C to H ratio is
1:4) is expected to produce an interesting effect to the film properties as humidity sensor. The characterization techniques
used to determine the morphology and chemical bonding of the thin films are field emission scanning electron microscopy
(FESEM) and Fourier transform infrared spectroscopy (FTIR), respectively. The variation of morphology and the existence
of nitrile band in these samples are correlated with the electrical properties of a-CNx thin films. Using humidity sensing
system, the sensing performance of the samples was examined. It was found that the response of sensors towards the
percentage of relative humidity (% RH) change is good resistive responses and good repeatability. The sensitivity of the
prepared a-CNx thin films is significantly higher (up to 79%) as compared to previous studies using CH4
or acetylene as
precursor gas. Based on these results, the properties and the sensitivity of the a-CNx thin films towards humidity can be
tailored by using an appropriate precursor gases and deposition parameters.

Matched MeSH terms: Radio Waves
Fulltext Optimized backoff scheme for prioritized data in wireless sensor networks: A class of service approach

Onwuegbuzie IU, Abd Razak S, Fauzi Isnin I, Darwish TSJ, Al-Dhaqm A

PLoS One, 2020;15(8):e0237154.
PMID: 32797055 DOI: 10.1371/journal.pone.0237154

Data prioritization of heterogeneous data in wireless sensor networks gives meaning to mission-critical data that are time-sensitive as this may be a matter of life and death. However, the standard IEEE 802.15.4 does not consider the prioritization of data. Prioritization schemes proffered in the literature have not adequately addressed this issue as proposed schemes either uses a single or complex backoff algorithm to estimate backoff time-slots for prioritized data. Subsequently, the carrier sense multiple access with collision avoidance scheme exhibits an exponentially increasing range of backoff times. These approaches are not only inefficient but result in high latency and increased power consumption. In this article, the concept of class of service (CS) was adopted to prioritize heterogeneous data (real-time and non-real-time), resulting in an optimized prioritized backoff MAC scheme called Class of Service Traffic Priority-based Medium Access Control (CSTP-MAC). This scheme classifies data into high priority data (HPD) and low priority data (LPD) by computing backoff times with expressions peculiar to the data priority class. The improved scheme grants nodes the opportunity to access the shared medium in a timely and power-efficient manner. Benchmarked against contemporary schemes, CSTP-MAC attained a 99% packet delivery ratio with improved power saving capability, which translates to a longer operational lifetime.

Matched MeSH terms: Radio
Upgrading producer gas quality from rubber wood gasification in a radio frequency tar thermocatalytic treatment reactor

Anis S, Zainal ZA

Bioresour Technol, 2013 Dec;150:328-37.
PMID: 24185417 DOI: 10.1016/j.biortech.2013.10.010

This study focused on improving the producer gas quality using radio frequency (RF) tar thermocatalytic treatment reactor. The producer gas containing tar, particles and water was directly passed at a particular flow rate into the RF reactor at various temperatures for catalytic and thermal treatments. Thermal treatment generates higher heating value of 5.76 MJ Nm(-3) at 1200°C. Catalytic treatments using both dolomite and Y-zeolite provide high tar and particles conversion efficiencies of about 97% on average. The result also showed that light poly-aromatic hydrocarbons especially naphthalene and aromatic compounds particularly benzene and toluene were still found even at higher reaction temperatures. Low energy intensive RF tar thermocatalytic treatment was found to be effective for upgrading the producer gas quality to meet the end user requirements and increasing its energy content.

Matched MeSH terms: Radio Waves*
Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system

Hannan MA, Arebey M, Begum RA, Basri H

Waste Manag, 2011 Dec;31(12):2406-13.
PMID: 21871788 DOI: 10.1016/j.wasman.2011.07.022

This paper deals with a system of integration of Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system. RFID, GPS, GPRS and GIS along with camera technologies have been integrated and developed the bin and truck intelligent monitoring system. A new kind of integrated theoretical framework, hardware architecture and interface algorithm has been introduced between the technologies for the successful implementation of the proposed system. In this system, bin and truck database have been developed such a way that the information of bin and truck ID, date and time of waste collection, bin status, amount of waste and bin and truck GPS coordinates etc. are complied and stored for monitoring and management activities. The results showed that the real-time image processing, histogram analysis, waste estimation and other bin information have been displayed in the GUI of the monitoring system. The real-time test and experimental results showed that the performance of the developed system was stable and satisfied the monitoring system with high practicability and validity.

Matched MeSH terms: Radio Frequency Identification Device/methods*
Fulltext Effect of radio-frequency electromagnetic radiations (RF-EMR) on passive avoidance behaviour and hippocampal morphology in Wistar rats

Narayanan SN, Kumar RS, Potu BK, Nayak S, Bhat PG, Mailankot M

Ups. J. Med. Sci., 2010 May;115(2):91-6.
PMID: 20095879 DOI: 10.3109/03009730903552661

The interaction of mobile phone radio-frequency electromagnetic radiation (RF-EMR) with the brain is a serious concern of our society.

Matched MeSH terms: Radio Waves*

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links