This article aims to provide insights into the factors that contribute to the separation efficiency of solid particles. In this study, a pneumatic jigging technique was used to assess the separation of solid waste materials that consisted of copper, glass and rubber insulator. Several initial experiments were carried out to evaluate the strengths and limitations of the technique. It is found that despite some limitations of the technique, all the samples prepared for the experiments were successfully separated. The follow-up experiments were then carried out to further assess the separation of copper wire and rubber insulator. The effects of air flow and pulse rates on the separation process were examined. The data for these follow-up experiments were analysed using a sink float analysis technique. The analysis shows that the air flow rate was very important in determining the separation efficiency. However, the separation efficiency may be influenced by the type of materials used.
Effects of laterite cover soil with different characteristics on survival of buried eggs, third instar larvae, and pupae of Musca domestica (L.) were studied experimentally. Soil treatments were loose dry soil, loose wet soil, compacted dry soil, and compacted wet soil (CWS). Eggs, third instar larvae, and pupae were buried under 30 cm of the different soil treatments and placed under field conditions until adults emerged. Rearing medium was provided for eggs and larvae, and control treatments of all stages were unburied immatures placed on soil surface. Egg and pupal survival to adult were significantly affected by the cover soil treatments, but third instars were more resilient. Wet soil treatments (loose wet soil and CWS) resulted in significantly reduced pupal survival, but increased survival of eggs. However, CWS significantly reduced adult emergence from buried eggs. Though emergence of house flies buried as eggs was significantly reduced, some were able to hatch and emerging first instar larvae developed to pupation. Although cover soil does not completely prevent fly emergence, it did limit development and emergence of buried house flies.
Solid waste management was explored in Asia's last five decades, and the issues and challenges were identified. Waste generation has increased in all nations in the previous 50 years, although more recently, a declining trend has been observed in Japan and Korea. The composition has been predominantly organic, with 45-50% being kitchen waste. Material extraction and productivity to sustain the most populous part of the globe are explained. Waste management technologies have evolved, with more nations slowly transitioning from landfills to using waste-to-energy options. However, landfilling and open dumps are still the major disposal choice in most developing countries in Asia. Thus, the issues of concern include dumpsites management, the informal sector, waste collection, open burning and food waste. Changes (increasing trends) in the recycling technologies and quantum are evident, as seen in several country reports from India, Indonesia, Japan, Malaysia, Singapore, South Korea, Thailand and Vietnam. There are several issues and challenges for recycling, which are explored in the text. Lastly, the drivers that propel the whole scenario of waste management in Asia and the evolution of these drivers over time are discussed. Several recommendations are included to achieve sustainable waste management in Asia.
Selecting a suitable Multi Criteria Decision Making (MCDM) method is a crucial stage to establish a Solid Waste Management (SWM) system. Main objective of the current study is to demonstrate and evaluate a proposed method using Multiple Criteria Decision Making methods (MCDM). An improved version of Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) applied to obtain the best municipal solid waste management method by comparing and ranking the scenarios. Applying this method in order to rank treatment methods is introduced as one contribution of the study. Besides, Viekriterijumsko Kompromisno Rangiranje (VIKOR) compromise solution method applied for sensitivity analyses. The proposed method can assist urban decision makers in prioritizing and selecting an optimized Municipal Solid Waste (MSW) treatment system. Besides, a logical and systematic scientific method was proposed to guide an appropriate decision-making. A modified TOPSIS methodology as a superior to existing methods for first time was applied for MSW problems. Applying this method in order to rank treatment methods is introduced as one contribution of the study. Next, 11 scenarios of MSW treatment methods are defined and compared environmentally and economically based on the waste management conditions. Results show that integrating a sanitary landfill (18.1%), RDF (3.1%), composting (2%), anaerobic digestion (40.4%), and recycling (36.4%) was an optimized model of integrated waste management. An applied decision-making structure provides the opportunity for optimum decision-making. Therefore, the mix of recycling and anaerobic digestion and a sanitary landfill with Electricity Production (EP) are the preferred options for MSW management.
A comprehensive exergoeconomic performance analysis of a municipal solid waste digestion plant integrated with a biogas genset was conducted throughout this study in order to highlight its bottlenecks for further improvements. Exergoeconomic performance parameters of each component of the plant were determined by solving exergy and cost balance equations based on Specific Exergy Costing (SPECO) approach. The analysis was conducted to reveal the cost structure of the plant based on actual operating information and economic data. The exergy unitary cost of two main products of the plant, i.e., bioelectricity and biofertilizer were determined at 26.27 and 2.27 USD/GJ, respectively. The genset showed the highest overall cost rate (101.27 USD/h) followed by digester (68.41 USD/h). Furthermore, the net bioelectricity amounted to 67.81% of the overall cost rate of the products, while this value was 32.19% for both liquid and dewatered digestates. According to the results obtained, efforts should mainly focus on enhancing the efficiency of the genset in order to boost the overall performance of the system exergoeconomically. In addition, minimizing the investment-related cost of the digester could also substantially enhance the exergoeconomic performance of the plant.
Compost leachate (CL) is often treated as sewage. Limited studies have characterised the use of CL for agriculture application due to the variation of nutrient range, potential pollutants and need for pretreatment before use. This paper reviewed the characteristics of CL in terms of its nutrients and physical characteristics from three types of biowastes, i.e. the organic portion of municipal solid waste (OP-MSW), animal manure and green waste. The nutrient range characterised are used to develop the dilution rate of the CL as fertigation water for three types of vegetables. The dilution rate of CL developed is based on the fertigation standards set by the Food and Agriculture Organization of the United Nations and Malaysia Standards. The results show that all CL contain high organic content and micronutrients, which exceeded the upper limits. For the fertigation of vegetables using the CL, based on the requirement of COD and micronutrients (Fe, Mn, Zn, Cu, Pb, Ni, Cd, Cr) of the vegetables, the CL from green waste required the lowest dilution rate (8-45 fold), followed by animal waste (33-65 fold) and the OP-MSW (193-1770 fold). The novel dilution range developed is vital to balance the essential nutrients in the CL while avoiding phototoxicity on plant and soil pollution. The dilution strategy developed is essential to support the conversion of CL as an organic liquid fertiliser for agricultural application.
Proper implementation of landfill siting with the right regulations and constraints can prevent undesirable long-term effects. Different countries have respective guidelines on criteria for new landfill sites. In this article, we perform a comparative study of municipal solid waste landfill siting criteria stated in the policies and guidelines of eight different constitutional bodies from Malaysia, Australia, India, U.S.A., Europe, China and the Middle East, and the World Bank. Subsequently, a geographic information system (GIS) multi-criteria evaluation model was applied to determine new suitable landfill sites using different criterion parameters using a constraint mapping technique and weighted linear combination. Application of Macro Modeler provided in the GIS-IDRISI Andes software helps in building and executing multi-step models. In addition, the analytic hierarchy process technique was included to determine the criterion weight of the decision maker's preferences as part of the weighted linear combination procedure. The differences in spatial results of suitable sites obtained signifies that dissimilarity in guideline specifications and requirements will have an effect on the decision-making process.
Matched MeSH terms: Solid Waste/analysis; Solid Waste/statistics & numerical data
Developing cities like Khulna, the third largest metropolitan city in Bangladesh, have now begun to confess the environmental and public health risks associated with uncontrolled dumping of solid wastes mainly due to the active participation of non-governmental organizations (NGOs) and community-based organizations (CBOs) in municipal solid waste (MSW) management.
Waste collection is an important part of waste management that involves different issues, including environmental, economic, and social, among others. Waste collection optimization can reduce the waste collection budget and environmental emissions by reducing the collection route distance. This paper presents a modified Backtracking Search Algorithm (BSA) in capacitated vehicle routing problem (CVRP) models with the smart bin concept to find the best optimized waste collection route solutions. The objective function minimizes the sum of the waste collection route distances. The study introduces the concept of the threshold waste level (TWL) of waste bins to reduce the number of bins to be emptied by finding an optimal range, thus minimizing the distance. A scheduling model is also introduced to compare the feasibility of the proposed model with that of the conventional collection system in terms of travel distance, collected waste, fuel consumption, fuel cost, efficiency and CO2 emission. The optimal TWL was found to be between 70% and 75% of the fill level of waste collection nodes and had the maximum tightness value for different problem cases. The obtained results for four days show a 36.80% distance reduction for 91.40% of the total waste collection, which eventually increases the average waste collection efficiency by 36.78% and reduces the fuel consumption, fuel cost and CO2 emission by 50%, 47.77% and 44.68%, respectively. Thus, the proposed optimization model can be considered a viable tool for optimizing waste collection routes to reduce economic costs and environmental impacts.
Due to a huge increase in polymer production, a tremendous increase in municipal solid waste is observed. Every year the existing landfills for disposal of waste polymers decrease and the effective recycling techniques for waste polymers are getting more and more important. In this work pyrolysis of waste polystyrene was performed in the presence of a laboratory synthesized copper oxide. The samples were pyrolyzed at different heating rates that is, 5°Cmin-1, 10°Cmin-1, 15°Cmin-1 and 20°Cmin-1 in a thermogravimetric analyzer in inert atmosphere using nitrogen. Thermogravimetric data were interpreted using various model fitting (Coats-Redfern) and model free methods (Ozawa-Flynn-Wall, Kissinger-Akahira-Sunose and Friedman). Thermodynamic parameters for the reaction were also determined. The activation energy calculated applying Coats-Redfern, Ozawa-Flynn-Wall, Kissinger-Akahira-Sunose and Friedman models were found in the ranges 105-148.48 kJmol-1, 99.41-140.52 kJmol-1, 103.67-149.15 kJmol-1 and 99.93-141.25 kJmol-1, respectively. The lowest activation energy for polystyrene degradation in the presence of copper oxide indicates the suitability of catalyst for the decomposition reaction to take place at lower temperature. Moreover, the obtained kinetics and thermodynamic parameters would be very helpful in determining the reaction mechanism of the solid waste in a real system.
As a novel method of purification, an aqueous organic phase system (AOPS) was employed to purify pectinase from mango waste. The effect of different parameters, such as the alcohol concentration (ethanol, 1-propanol, and 2-propanol), the salt type and concentration (ammonium sulfate, potassium phosphate and sodium citrate), the feed stock crude load, the aqueous phase pH and NaCl concentration, were investigated in the recovery of pectinase from mango peel. The partition coefficient (K), selectivity (S), purification factor (PF) and yield (Y, %) were investigated in this study as important parameters for the evaluation of enzyme recovery. The desirable partition efficiency for pectinase purification was achieved in an AOPS of 19% (w/w) ethanol and 22% (w/w) potassium phosphate in the presence of 5% (w/w) NaCl at pH 7.0. Based on the system, the purification factor of pectinase was enhanced 11.7, with a high yield of 97.1%.
Although pharmaceuticals treat illnesses and prevent diseases in humans and animals, ironically, they are now among the emerging pollutants in the environment. As individuals continue to consume medicines, households can become a primary source of pharmaceutical pollutants. This paper explains relevant Malaysian law and policy on the issue. Using a questionnaire survey, it also assesses public perception concerning the environmental impact of pharmaceutical waste and the current methods of disposal that are practiced in Selangor. The survey used a convenience sampling and the data collected were analysed using statistical descriptive analysis. Most of the participants were aware that pharmaceutical waste can have an adverse impact on the environment and public health. Half of the participants disposed of their pharmaceutical waste in trash bins. About 2.9% of the respondents poured their household pharmaceutical waste (HPW) directly down the drain, while 8.8% poured them down the sink in the kitchen or toilet. The study also discovered that while 73.8% of the respondents felt that HPW should be separated from other household solid waste, only 25.2% returned their medicinal waste through the medicine return-back programme. The majority of the respondents (82.5%) agreed that information concerning the proper disposal of HPW is insufficient. The study concludes that while the respondents were aware of the adverse impact of HPW, their practices to ensure proper disposal is discouraging. There is a need for effective unwanted medicines return-back programme as a more prudent disposal method of HPW to avoid any risk to the environment or human health.
A novel methodological approach was developed to quantified the volume of industrial waste desposal (IWD) site, combined with municipal waste materials (MWM), through the integration of a non-invasive, fast, and less expenssive RES2-D Electrical Resistivity Technique (ERT), using Wenner-Schlumberger electrode array geophysical method with Oasis Montaj software. Underground water bearing structures, and the eco-system are being contaminated through seepage of the plumes emanating from the mixtures of the industrial waste materials (IWM), made of moist cemented soil with municipal solid wastes (MSW) dumped at the site. The distribution of the contiminant hazardous plumes emanating from the waste materials' mixtures within the subsurface structural lithological layers was clearly map and delineated within the near-surface structures, using the triplicate technique to collect samples of the soil with the waste mixtures, and the water analysis for the presence of dissolved ions. The deployed method helped to monitor the seepage of the contaminant leachate plumes to the groundwater aquifer units via the ground surface, through the subsurface stratum lithological layers, and hence, estimation of the waste materials' volume was possibly approximated to be 312,000 m3. In summary, the novel method adopted are as presented below:•The novel method is transferable, reproduce-able, and most importantly, it is unambiguous technique for the quantification of environmental, industrial and municipal waste materials.•It helps to map the distribution of the plumes emanating from the waste materials' mixtures within the subsurface structural lithological layers that was clearly delineated within the near-surface structures underlain the study site.•The procedure helped in the monitoring of leachate contaminants plumes seepages into the surface water bodies and the groundwater aquifer units, via the ground surface, through to the porous subsurface stratum lithological layers.
Environmental hazards, industrial, and municipal wastes geochemical and geophysical assessments were carried out at an industrial waste disposal (IWD) site at Bukit Kepong, Kuala Lumpur, Malaysia. RES2-D geophysical method was applied, capable of identification and quantification of the industrial wastes; buried hazardous materials (BHM) and their effects on the subsurface stratum, from the moderately saturated zones, to fully saturated zones housing the aquifer units underneath the water table. Six RES2-D survey profiles were respectively acquired along E-W, and N-S directions. The perpendicular arrangement of the RES2-D survey lines, was tenaciously designed to make possible, the industrial waste materials (IWM)and municipal solid waste (MSW) quantification, with sufficient length of survey lines set at 200 m, and electrode spacing of 5 m, to cover as much details segments of the IWM and MSW as possible. The six RES2-D inversion results, helped in the subsurface stratum classification into three layers, namely; soft layers, which encompasses the waste materials, with varied resistivity values i.e., 0-100 Ω-m, at 10-15 m depths. The consolidated layers produced varied resistivity values i.e., 101-400 Ω-m, at 15-20 m depths. The bedrock has the highest resistivity values i.e., 401-2000 Ω-m, at depths > 20 m. The estimated volume of the waste materials was 312,000 m 3, using 3-D Oasis Montaj modeling via rectangular prism model generated from the inverted RES2-D. Results from the geochemical analysis helped in the validation of the site as a potential contaminated zone with severe health effects.
Globally, around 1.3 billion tonnes of waste are generated annually, and solid waste management has thus become a major concern worldwide. There are projections of a 70% increase in waste generation from 2016 to 2050 owing to urbanization and the rapid growth of the global population. Estimates indicate that around 38,200 tonnes of waste are generated per day in Malaysia, and this volume of waste is significantly shortening the planned life spans of operating sanitary landfills in the country. Batu Pahat is a district in the state of Johor, Malaysia, with a relatively large population of 495,000 and with no record of an operational sanitary landfill. This study was conducted to identify and classify the most suitable sites for sanitary landfill developments in southern Peninsular Malaysia by means of the Analytical Hierarchy Process (AHP), which is recognized as a competent technique for multicriteria decision-making. The resulting landfill site suitability index map established 33.88 km2 of area coverage as very highly suitable for landfill development, while 353.86 km2 of area coverage was classified as unsuitable. Sites 1-6 were identified as the most suitable for landfill activities. Sites 1-5 are situated in agricultural land areas, while site 6 is in a forested land area; this implies public participation and the adoption of compensatory measures in the event of landfill development in these areas, given their socioeconomic importance. The six suitable sites are all at least 2000 m from rivers: 2000-3000 m for sites 1, 3, and 5 and > 3000 m for sites 2, 4, and 6. The six sites are all > 3000 m from fault zones and > 1000 m from flood-prone areas, meaning that occurrences such as fault movements and flooding will have minimal impact on the operational activities of landfills at these sites. The selection of sites 1-6 as very suitable for landfill development was associated with an overall accuracy rating of 93.33% and kappa coefficient score of 0.92 based on accuracy assessment analysis of all sites. This study will guide the actions of policymakers, city planners, and local authorities toward sustainable and environment-friendly landfill development and operation in Batu Pahat and other districts in the state of Johor.
The prevalence of organic solid waste worldwide has turned into a problem that requires comprehensive treatment on all fronts. The amount of agricultural waste generated by agro-based industries has more than triplet. It not only pollutes the environment but also wastes a lot of beneficial biomass resources. These wastes may be utilized as a different option/source for the manufacturing of many goods, including biogas, biofertilizers, biofuel, mushrooms and tempeh as the primary ingredients in numerous industries. Utilizing agro-industrial wastes as good raw materials may provide cost reduction and lower environmental pollution levels. Agro-industrial wastes are converted into biofuels, enzymes, vitamin supplements, antioxidants, livestock feed, antibiotics, biofertilizers and other compounds via solid-state fermentation (SSF). By definition, SSF is a method used when there is little to no free water available. As a result, it permits the use of solid materials as biotransformation substrates. Through SSF methods, a variety of microorganisms are employed to produce these worthwhile things. SSFs are therefore reviewed and discussed along with their impact on the production of value-added items. This review will provide thorough essential details information on recycling and the use of agricultural waste.
In this study a GIS model was developed and spatial analytical techniques performed to identify and select a suitable location for a waste transfer station in the sprawling suburban town of Petaling Jaya. The lack of a transfer station in urban centres of Malaysia has caused many problems and affects the efficiency of waste collection and disposal. With diminishing space for landfills and the increasing cost of solid waste management, the need for urban solid-waste recycling has become very important. However, finding a place for waste to be efficiently sorted before unwanted waste can be carried to disposal landfills has social and physical constraints. This study applies GIS techniques and analysis for site selection and identifies an acceptable area. In the model, environmental, physical and social constraints were taken into account, resulting in the selection of a potential area that is acceptable to the residents of the area because it is out of range of causing public nuisance and within minimum travelling distance for collection vehicles. The results show that the potential location for the transfer station should be in proximity of the industrial area of Petaling Jaya, allowing for the possible sale of recyclable materials to local industries. The location is also sited near a major highway to allow quick transportation of the rest of the unwanted waste to the landfill.
In this paper, optimum routing was developed based on the travel salesman method and integrated in ArcInfo GIS using linear programming. The results of the optimized travel distances and times for residential waste collection and routing to disposal site were used to calculate the number and type of required track collection, labour requirement, costing of waste collection and to determine the overall solid waste management efficiency through waste management operation research methods. The objective of the study was to optimize residential collection and hauling to disposal site through operation cost minimization for Petaling Jaya Municipality in the state of Selangor, Malaysia. The study determined that with optimized routes and recycling possibilities, the total cost of waste collections could be reduced from RM90,372 to RM20,967, with a reduction of 76.8%. It was also revealed that optimum routes might not necessarily be the shortest distance from point A to point B as travel time maybe high on short distances due to traffic congestion and the presence of many traffic lights. Techniques and methods developed using general GIS have proven effective in route optimization and allowed management of data to suit local conditions and limitations of waste management for the studied area. Thus, scenarios of travel distances, time and waste quantity value generated from the GIS enabled appropriate determination of the number of waste trucks and labour requirements for the operation and the overall calculation of costs of waste management based on the operation research methods used in the study.
A novel, cost-effective and real-time process monitoring and control system was developed to maintain stable operation of waste-to-energy gasification process. It comprised a feedback loop control that utilized the differential temperatures of the oxidation and reduction zones in the gasifier to determine the regional heat-flow (endothermic or exothermic), to assess the availability of oxidizing agent (for instance, air or O2) at the char bed and to calculate the fuel feeding rate. Based on the correlations developed, the air-to-fuel ratio or the equivalence air ratio (ER) for air gasification could be instantaneously adjusted to maintain stable operation of the gasifier. This study demonstrated a simplification of complex reaction dynamics in the gasification process to differential temperature profiling of the gasifier. The monitoring and control system was tested for more than 70 h of continuous operation in a downdraft fixed-bed gasifier with refuse-derived fuel (RDF) prepared from municipal solid wastes (MSW). With the system, fuel feeding rate could be adjusted accurately to stabilize the operating temperature and ER in the gasifier and generate syngas with consistent properties. Significant reductions in the fluctuations of temperature profiles at oxidation and reduction zones (from higher than 100 °C to lower than 50 °C), differential temperatures (from ±200 to ±50 °C) in gasifier and the flow rate (from 16 ± 6.5 to 12 ± 1.8 L/min), composition of main gas components, LHV (from 6.2 ± 3.1 to 5.7 ± 1.6 MJ/Nm3) and tar content (from 8.0 ± 9.7 to 7.5 ± 4.2 g/Nm3) of syngas were demonstrated. The developed gasifier monitoring and control system is adaptable to various types (updraft, downdraft, and fluidized-bed) and scales (lab, pilot, large scale) of gasifiers with different types of fuel.
In Malaysia, the greenhouse gases (GHGs) emissions reduction via composting of source-separated organic waste (SOW) in municipal solid waste (MSW) has not been assessed. Assessment of GHG emissions reduction via composting of SOW is important as environmental impacts from waste management are waste-specific and local-specific. The study presents the case study for potential carbon reduction via composting of SOW in University of Malaya (UM). In this study, a series of calculations were used to evaluate the GHG emission of different SOW management scenarios. The calculations based on IPCC calculation methods (AM0025) include GHGs emissions from landfilling, fuel consumption in transportation and SOW composting activity. The methods were applied to assess the GHG emissions from five alternative SOW management scenarios in UM. From the baseline scenario (S0), a total of 1,636.18 tCO2e was generated. In conjunction with target of 22% recycling rate, as shown in S1, 14% reduction in potential GHG emission can be achieved. The carbon reduction can be further enhanced by increasing the SOW composting capacity. The net GHG emission for S1, S2, S3 and S4 were 1,399.52, 1,161.29, 857.70 and 1,060.48 tCO2e, respectively. In general, waste diversion for composting proved a significant net GHG emission reduction as shown in S3 (47%), S4 (35%) and S2 (29%). Despite the emission due to direct on-site activity, the significant reduction in methane generation at landfill has reduced the net GHG emission. The emission source of each scenario was studied and analysed.