Displaying publications 1 - 20 of 44 in total

Abstract:
Sort:
  1. Profile of solvent abusers (glue sniffers) in East Malaysia
    Zabedah MY, Razak M, Zakiah I, Zuraidah AB
    Malays J Pathol, 2001 Dec;23(2):105-9.
    PMID: 12166590
    Solvent abuse is deliberate sniffing of an organic solvent for the intention of altering the physiological state of the individual. It is also commonly known as glue sniffing because glue is the most commonly abused substance. This form of substance abuse is widespread throughout the world and usually popular among secondary school children and young adults because of its easy availability and it is cheaper compared with most drugs of abuse. In Malaysia this problem has been recognized especially among the children in East Malaysia. In this study, 37 children and young adults from or around Kota Kinabalu, Sabah were referred to Bukit Padang Psychiatric Hospital by the Anti-drug Task force for suspected solvent abuse. These children were interviewed using questionaire and examined physically. Blood and urine were analysed for toluene and hippuric acid. 27 of the children, age ranging between 8 and 20 years, willingly admitted to sniffing glue for a period between a few months to 2 years. Most of them were children of Fillipino illegal immigrants in Kota Kinabalu. Biochemical parameters were found to be normal. Two of them were pale with low hemoglobin and 7 had eosinophilia. Haematuria and proteinuria were found in 21 children (78%). 16 blood samples with toluene levels ranging from 0.3 to 41 microg/ml and 10 urine samples have elevated urinary hippuric acid levels ranging from 1.2 to 7.4 mg/ml. Strong positive correlation was noted between mean blood toluene levels and duration of abuse.
    Matched MeSH terms: Toluene/blood; Toluene/urine
  2. Study on kinetic model of microwave thermocatalytic treatment of biomass tar model compound
    Anis S, Zainal ZA
    Bioresour Technol, 2014 Jan;151:183-90.
    PMID: 24231266 DOI: 10.1016/j.biortech.2013.10.065
    Kinetic model parameters for toluene conversion under microwave thermocatalytic treatment were evaluated. The kinetic rate constants were determined using integral method based on experimental data and coupled with Arrhenius equation for obtaining the activation energies and pre-exponential factors. The model provides a good agreement with the experimental data. The kinetic model was also validated with standard error of 3% on average. The extrapolation of the model showed a reasonable trend to predict toluene conversion and product yield both in thermal and catalytic treatments. Under microwave irradiation, activation energy of toluene conversion was lower in the range of 3-27 kJ mol(-1) compared to those of conventional heating reported in the literatures. The overall reaction rate was six times higher compared to conventional heating. As a whole, the kinetic model works better for tar model removal in the absence of gas reforming within a level of reliability demonstrated in this study.
    Matched MeSH terms: Toluene/chemistry
  3. Performance of quartz crystal microbalance gas sensors using thin films of titanium dioxide, porphyrin and titanium dioxide coated with dye porphyrin
    Syariena Arshad, Salleh M, Yahaya M
    Sains Malaysiana, 2008;37:233-237.
    Titanium dioxide (TiO2), porphyrin and TiO2 coated with dye porphyrin thin films were prepared on Quartz Crystal Microbalance (QCM) using sol-gel dip coating method and were tested for sensing of volatile organic compounds (VOCs). The porphyrin used was 5,10,15,20-tetraphenyl-21H,23H-porphine manganese (III) chloride (MnTPPCl). The sensing sensitivity was based on the change in the fundamental frequency of the QCM upon exposure towards six vapor samples, namely ethanol, acetone, cyclohexane, toluene, o-xylene and 2-propanol. It was found that all the thin films were sensitive towards all the vapors. However, the TiO2 coated MnTPPCl thin film exhibit the most sensitive and has good selectivity property.
    Matched MeSH terms: Toluene
  4. Ethylbenzene and toluene interactions with biochar from municipal solid waste in single and dual systems
    Jayawardhana Y, Keerthanan S, Lam SS, Vithanage M
    Environ Res, 2021 06;197:111102.
    PMID: 33798520 DOI: 10.1016/j.envres.2021.111102
    The present study investigated adsorptive removal of toluene and ethylbenzene from the aqueous media via using biochar derived from municipal solid waste (termed "MSW-BC") in a single and binary contaminant system at 25-45 °C. The adsorption was evaluated at different pH (3-10), experimental time (up to 24 h), and initial adsorbate concentrations (10-600 μg/L) in single and binary contaminant system. A fixed-bed column experiment was also conducted using MSW-BC (0.25%) and influent concentration of toluene and ethylbenzene (4 mg/L) at 2 mL/min of flow rate. The adsorption of toluene and ethylbenzene on the MSW-BC was mildly dependent on the pH, and the peak adsorption ability (44-47 μg/g) was recorded at a baseline pH of ~8 in mono and dual contaminant system. Langmuir and Hill are the models that match the isotherm results in a single contaminant environment for both toluene (R2 of 0.97 and 0.99, respectively) and ethylbenzene (R2 of 0.99 and 0.99, respectively) adsorption. In the binary system, the isotherm models matched in the order of Langmuir > Hill > Freundlich for toluene, whereas Hill > Freundlich > Langmuir for ethylbenzene. The adsorption in the batch experiment was likely to take place via cooperative and multilayer adsorption onto MSW-BC involving hydrophobic, π- π and n- π attractions, specific interaction such as hydrogen-π and cation-π interactions, and van der Waals interactions. The thermodynamic results indicate exothermic adsorption occurred by physical attractions between toluene and ethylbenzene, and MSW-BC. The breakthrough behavior of toluene and ethylbenzene was successfully described with Yoon-Nelson and Thomas models. The data demonstrate that the low-cost adsorbent derived from the municipal solid waste can be utilized to remove toluene and ethylbenzene in landfill leachate.
    Matched MeSH terms: Toluene*
  5. Toluene-induced leukodystrophy from glue sniffing
    Lau YH, Mawardi AS, Zain NR, Viswanathan S
    Pract Neurol, 2021 Oct;21(5):439-441.
    PMID: 34039751 DOI: 10.1136/practneurol-2021-002942
    A 33-year-old man with a history of chronic toluene abuse through glue sniffing, developed tremors, cerebellar signs and cognitive decline. MR scan of the brain showed global cerebral and cerebellar atrophy with symmetrical T2-weighted hypointensities in the basal ganglia, thalami and midbrain. After stopping glue sniffing, his tremors, ataxia of gait, speech and cognition partially improved. Early recognition and intervention of toluene-induced leukodystrophy could prevent ongoing morbidity and premature mortality.
    Matched MeSH terms: Toluene/adverse effects
  6. Fulltext Crystal structure of 2-(3-bromo-phen-yl)-1,3-di-thiane
    Zukerman-Schpector J, Caracelli I, Stefani HA, Gozhina O, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2015 Mar 1;71(Pt 3):o179-80.
    PMID: 25844236 DOI: 10.1107/S2056989015002832
    In the title compound, C10H11BrS2, the 1,3-di-thiane ring has a chair conformation with the 1,4-disposed C atoms being above and below the remaining four atoms. The bromo-benzene ring occupies an equatorial position and forms a dihedral angle of 86.38 (12)° with the least-squares plane through the 1,3-di-thiane ring. Thus, to a first approximation the mol-ecule has mirror symmetry with the mirror containing the bromo-benzene ring and the 1,4-disposed C atoms of the 1,3-di-thiane ring. In the crystal, mol-ecules associate via weak methyl-ene-bromo-benzene C-H⋯π and π-π [Cg⋯Cg = 3.7770 (14) Å for centrosymmetrically related bromo-benzene rings] inter-actions, forming supra-molecular layers parallel to [10-1]; these stack with no specific inter-molecular inter-actions between them.
    Matched MeSH terms: Toluene
  7. Performances of toluene removal by activated carbon derived from durian shell
    Tham YJ, Latif PA, Abdullah AM, Shamala-Devi A, Taufiq-Yap YH
    Bioresour Technol, 2011 Jan;102(2):724-8.
    PMID: 20884200 DOI: 10.1016/j.biortech.2010.08.068
    In the effort to find alternative low cost adsorbent for volatile organic vapors has prompted this research in assessing the effectiveness of activated carbon produced from durian shell in removing toluene vapors. Durian shells were impregnated with different concentrations of H3PO4 followed by carbonization at 500 °C for 20 min under nitrogen atmosphere. The prepared durian shell activated carbon (DSAC) was characterized for its physical and chemical properties. The removal efficiency of toluene by DSAC was performed using different toluene concentrations. Results showed that the highest BET surface area of the produced DSAC was 1404 m2/g. Highest removal efficiency of toluene vapors was achieved by using DSAC impregnated with 30% of acid concentration heated at 500 °C for 20 min heating duration. However, there is insignificant difference between removal efficiency of toluene by DSAC and different toluene concentrations. The toluene adsorption by DSAC was better fitted into Freundlich model.
    Matched MeSH terms: Toluene/isolation & purification*
  8. BTEX compositions and its potential health impacts in Malaysia
    Latif MT, Abd Hamid HH, Ahamad F, Khan MF, Mohd Nadzir MS, Othman M, et al.
    Chemosphere, 2019 Dec;237:124451.
    PMID: 31394440 DOI: 10.1016/j.chemosphere.2019.124451
    This study aims to determine the composition of BTEX (benzene, toluene, ethylbenzene and xylene) and assess the risk to health at different sites in Malaysia. Continuous monitoring of BTEX in Kuala Lumpur City Centre, Kuala Terengganu, Kota Kinabalu and Fraser Hill were conducted using Online Gas Chromatograph. For comparison, BTEX at selected hotspot locations were determined by active sampling method using sorbent tubes and Thermal Desorption Gas Chromatography Mass Spectrometry. The hazard quotient (HQ) for non-carcinogenic and the life-time cancer risk (LTCR) of BTEX were calculated using the United States Environmental Protection Agency (USEPA) health risk assessment (HRA) methods. The results showed that the highest total BTEX concentrations using continuous monitoring were recorded in the Kuala Lumpur City Centre (49.56 ± 23.71 μg/m3). Toluene was the most dominant among the BTEX compounds. The average concentrations of benzene ranged from 0.69 ± 0.45 μg/m3 to 6.20 ± 3.51 μg/m3. Measurements using active sampling showed that BTEX concentrations dominated at the roadside (193.11 ± 114.57 μg/m3) in comparison to petrol station (73.08 ± 30.41 μg/m3), petrochemical industry (32.10 ± 13.13 μg/m3) and airport (25.30 ± 6.17 μg/m3). Strong correlations among BTEX compounds (p<0.01, r>0.7) at Kuala Lumpur City Centre showed that BTEX compounds originated from similar sources. The values of HQ at all stations were <1 indicating the non-carcinogenic risk are negligible and do not pose threats to human health. The LTCR value based on benzene inhalation (1.59 × 10-5) at Kuala Lumpur City Centre were between 1 × 10-4 and 1 × 10-5, representing a probable carcinogenic risk.
    Matched MeSH terms: Toluene/analysis*; Toluene/toxicity
  9. Start-up, performance and optimization of a compost biofilter treating gas-phase mixture of benzene and toluene
    Rene ER, Kar S, Krishnan J, Pakshirajan K, López ME, Murthy DV, et al.
    Bioresour Technol, 2015 Aug;190:529-35.
    PMID: 25827361 DOI: 10.1016/j.biortech.2015.03.049
    The performance of a compost biofilter inoculated with mixed microbial consortium was optimized for treating a gas-phase mixture of benzene and toluene. The biofilter was acclimated to these VOCs for a period of ∼18d. The effects of concentration and flow rate on the removal efficiency (RE) and elimination capacity (EC) were investigated by varying the inlet concentration of benzene (0.12-0.95g/m(3)), toluene (0.14-1.48g/m(3)) and gas-flow rate (0.024-0.072m(3)/h). At comparable loading rates, benzene removal in the mixture was reduced in the range of 6.6-41% in comparison with the individual benzene degradation. Toluene removal in mixture was even more affected as observed from the reductions in REs, ranging from 18.4% to 76%. The results were statistically interpreted by performing an analysis of variance (ANOVA) to elucidate the main and interaction effects.
    Matched MeSH terms: Toluene/isolation & purification*; Toluene/chemistry
  10. On-line CO, CO2 emissions evaluation and (benzene, toluene, xylene) determination from experimental burn of tropical biomass
    Tawfiq MF, Aroua MK, Sulaiman NM
    J Environ Sci (China), 2015 Jul 1;33:239-44.
    PMID: 26141898 DOI: 10.1016/j.jes.2015.01.015
    Atmospheric pollution and global warming issues are increasingly becoming major environmental concerns. Fire is one of the significant sources of pollutant gases released into the atmosphere; and tropical biomass fires, which are of particular interest in this study, contribute greatly to the global budget of CO and CO2. This pioneer research simulates the natural biomass burning strategy in Malaysia using an experimental burning facility. The investigation was conducted on the emissions (CO2, CO, and Benzene, Toluene, Ethylbenzene, Xylenes (BTEX)) from ten tropical biomass species. The selected species represent the major tropical forests that are frequently subjected to dry forest fire incidents. An experimental burning facility equipped with an on-line gas analyzer was employed to determine the burning emissions. The major emission factors were found to vary among the species, and the specific results were as follows. The moisture content of a particular biomass greatly influenced its emission pattern. The smoke analysis results revealed the existence of BTEX, which were sampled from a combustion chamber by enrichment traps aided with a universal gas sampler. The BTEX were determined by organic solvent extraction followed by GC/MS quantification, the results of which suggested that the biomass burning emission factor contributed significant amounts of benzene, toluene, and m,p-xylene. The modified combustion efficiency (MCE) changed in response to changes in the sample moisture content. Therefore, this study concluded that the emission of some pollutants mainly depends on the burning phase and sample moisture content of the biomass.
    Matched MeSH terms: Toluene/chemistry*
  11. Andrographolide prevented toluene diisocyanate-induced occupational asthma and aberrant airway E-cadherin distribution via p38 MAPK-dependent Nrf2 induction
    Sulaiman I, Tan K, Mohtarrudin N, Lim JCW, Stanslas J
    Pulm Pharmacol Ther, 2018 12;53:39-51.
    PMID: 30244166 DOI: 10.1016/j.pupt.2018.09.008
    Toluene diisocyanate (TDI) is a major cause of chemical-induced occupational asthma, which contributes about 15% of global asthma burden. Resistance and compounded side effects associated with the use of corticosteroid in asthma necessitate the search for alternative drugs. Andrographolide (AGP), a naturally occurring diterpene lactone is known to exhibit various bioactivities. Its ability to ameliorate cardinal features of allergic asthma was previously suggested in an eosinophilic asthma endotype. However, its potential antiasthma activity and mechanism of action in a neutrophilic occupational asthma model, as well as its effect on epithelial dysfunction remain unknown. BALB/c mice were dermally sensitised with 0.3% TDI or acetone olive oil (AOO) vehicle on day 1 and 8, followed by 0.1% TDI intranasal challenge on days 15, 18 and 21. Endpoints were evaluated via bronchoalveolar lavage fluid (BALF) cell analysis, 2',7'-dichlorofluorescein diacetate (DCFDA) assays, immunoblotting, immunohistochemistry and methacholine challenge test. Decreases in total and differential leukocyte counts of BALF were recorded in AGP-treated animals. The compound dose-dependently reduced intracellular de-esterification of DCFDA, thus suggesting AGP's potential to inhibit intracellular reactive oxygen species (ROS). Mechanistically, the treatment prevented TDI-induced aberrant E-cadherin distribution and restored airway epithelial β-catenin at cell to cell contact site. Furthermore, AGP ameliorated TDI induced pulmonary collagen deposition. In addition, the treatment significantly upregulated pulmonary HO-1, Nrf2 and phospho-p38 levels. Airway hyperresponsiveness was markedly suppressed among AGP-treated animals. Collectively, these findings suggest AGP's protective function against TDI-induced airway epithelial barrier dysfunction and oxidative lung damage possibly through the upregulation of adherence junction proteins and the activation of p38/Nrf2 signalling. This study elucidates the therapeutic potential of AGP in the control and management of chemical-induced allergic asthma. To the best of our knowledge, the potential anti-asthma activity of AGP in TDI-induced occupational asthma has not been reported previously.
    Matched MeSH terms: Toluene 2,4-Diisocyanate/toxicity
  12. Enhanced toluene removal using granular activated carbon and a yeast strain Candida tropicalis in bubble-column bioreactors
    Ahmed Z, Hwang SJ, Shin SK, Song J
    J Hazard Mater, 2010 Apr 15;176(1-3):849-55.
    PMID: 20031312 DOI: 10.1016/j.jhazmat.2009.11.114
    The yeast strain Candida tropicalis was used for the biodegradation of gaseous toluene. Toluene was effectively treated by a liquid culture of C. tropicalis in a bubble-column bioreactor, and the toluene removal efficiency increased with decreasing gas flow rate. However, toluene mass transfer from the gas-to-liquid phase was a major limitation for the uptake of toluene by C. tropicalis. The toluene removal efficiency was enhanced when granular activated carbon (GAC) was added as a fluidized material. The GAC fluidized bioreactor demonstrated toluene removal efficiencies ranging from 50 to 82% when the inlet toluene loading was varied between 13.1 and 26.9 g/m(3)/h. The yield value of C. tropicalis ranged from 0.11 to 0.21 g-biomass/g-toluene, which was substantially lower than yield values for bacteria reported in the literature. The maximum elimination capacity determined in the GAC fluidized bioreactor was 172 g/m(3)/h at a toluene loading of 291 g/m(3)/h. Transient loading experiments revealed that approximately 50% of the toluene introduced was initially adsorbed onto the GAC during an increased loading period, and then slowly desorbed and became available to the yeast culture. Hence, the fluidized GAC mediated in improving the gas-to-liquid mass transfer of toluene, resulting in a high toluene removal capacity. Consequently, the GAC bubble-column bioreactor using the culture of C. tropicalis can be successfully applied for the removal of gaseous toluene.
    Matched MeSH terms: Toluene/metabolism*
  13. Vortex-assisted liquid-liquid-liquid microextraction (VALLLME) technique: A new microextraction approach for direct liquid chromatography and capillary electrophoresis analysis
    Makahleh A, Yap HF, Saad B
    Talanta, 2015 Oct 01;143:394-401.
    PMID: 26078176 DOI: 10.1016/j.talanta.2015.05.011
    A new, rapid and sensitive microextraction technique named vortex-assisted liquid-liquid-liquid microextraction (VALLLME) is proposed. The complete extraction process involves two steps. First, a vortex-assisted liquid-liquid microextraction (VALLME) procedure was used to extract the analytes from a relatively large volume of sample (donor phase) to a small volume of organic solvent (intermediate phase). Next, a micro-vortex-assisted liquid-liquid extraction (µ-VALLE) was used to extract the target analytes from the intermediate phase to a smaller volume of aqueous solution (acceptor phase). The final extract (acceptor phase) can be directly injected into the high performance liquid chromatography or capillary electrophoresis units without any further treatments. The selection of the intermediate phase and the manipulation of pH are key parameters that ensure good extraction efficiency of the technique. The proposed technique has been successfully applied for the determination of carvedilol (used as model analyte) in biological fluid samples. The optimum extraction conditions were: toluene as intermediate phase (150 μL); pH of the donor phase, 9.5; vortex time of the VALLME, 45 s (maximum speed, 2500 rpm); 0.1M HCl (15 μL) as acceptor phase; vortexing time of the µ-VALLME, 75 s (maximum stirring speed, 2500 rpm) and salt concentration in the donor phase, 5% (w/v). Under these conditions, enrichment factors of 51- and 418-fold for VALLME step and VALLLME procedure, respectively, were achieved.
    Matched MeSH terms: Toluene
  14. Fulltext Comparative Study of Aromatic and Cycloaliphatic Isocyanate Effects on Physico-Chemical Properties of Bio-Based Polyurethane Acrylate Coatings
    Mudri NH, Abdullah LC, Aung MM, Salleh MZ, Awang Biak DR, Rayung M
    Polymers (Basel), 2020 Jul 03;12(7).
    PMID: 32635384 DOI: 10.3390/polym12071494
    Crude jatropha oil (JO) was modified to form jatropha oil-based polyol (JOL) via two steps in a chemical reaction known as epoxidation and hydroxylation. JOL was then reacted with isocyanates to produce JO-based polyurethane resin. In this study, two types of isocyanates, 2,4-toluene diisocyanate (2,4-TDI) and isophorone diisocyanate (IPDI) were introduced to produce JPUA-TDI and JPUA-IPDI respectively. 2,4-TDI is categorised as an aromatic isocyanate whilst IPDI is known as a cycloaliphatic isocyanate. Both JPUA-TDI and JPUA-IPDI were then end-capped by the acrylate functional group of 2-hydroxyethyl methacrylate (HEMA). The effects of that isocyanate structure were investigated for their physico, chemical and thermal properties. The changes of the functional groups during each synthesis step were monitored by FTIR analysis. The appearance of urethane peaks was observed at 1532 cm-1, 1718 cm-1 and 3369 cm-1 while acrylate peaks were detected at 815 cm-1 and 1663 cm-1 indicating that JPUA was successfully synthesised. It was found that the molar mass of JPUA-TDI was doubled compared to JPUA-IPDI. Each resin showed a similar degradation pattern analysed by thermal gravimetric analysis (TGA). For the mechanical properties, the JPUA-IPDI-based coating formulation exhibited a higher hardness value but poor adhesion compared to the JPUA-TDI-based coating formulation. Both types of jatropha-based polyurethane acrylate may potentially be used in an ultraviolet (UV) curing system specifically for clear coat surface applications to replace dependency on petroleum-based chemicals.
    Matched MeSH terms: Toluene 2,4-Diisocyanate
  15. Fulltext β-Cyclodextrin conjugated bifunctional isocyanate linker polymer for enhanced removal of 2,4-dinitrophenol from environmental waters
    Anne JM, Boon YH, Saad B, Miskam M, Yusoff MM, Shahriman MS, et al.
    R Soc Open Sci, 2018 Aug;5(8):180942.
    PMID: 30225083 DOI: 10.1098/rsos.180942
    In this work, we reported the synthesis, characterization and adsorption study of two β-cyclodextrin (βCD) cross-linked polymers using aromatic linker 2,4-toluene diisocyanate (2,4-TDI) and aliphatic linker 1,6-hexamethylene diisocyanate (1,6-HDI) to form insoluble βCD-TDI and βCD-HDI. The adsorption of 2,4-dinitrophenol (DNP) on both polymers as an adsorbent was studied in batch adsorption experiments. Both polymers were well characterized using various tools that include Fourier transform infrared spectroscopy, thermogravimetric analysis, Brunauer-Emmett-Teller analysis and scanning electron microscopy, and the results obtained were compared with the native βCD. The adsorption isotherm of 2,4-DNP onto polymers was studied. It showed that the Freundlich isotherm is a better fit for βCD-TDI, while the Langmuir isotherm is a better fit for βCD-HMDI. The pseudo-second-order kinetic model represented the adsorption process for both of the polymers. The thermodynamic study showed that βCD-TDI polymer was more favourable towards 2,4-DNP when compared with βCD-HDI polymer. Under optimized conditions, both βCD polymers were successfully applied on various environmental water samples for the removal of 2,4-DNP. βCD-TDI polymer showed enhanced sorption capacity and higher removal efficiency (greater than 80%) than βCD-HDI (greater than 70%) towards 2,4-DNP. The mechanism involved was discussed, and the effects of cross-linkers on βCD open up new perspectives for the removal of toxic contaminants from a body of water.
    Matched MeSH terms: Toluene 2,4-Diisocyanate
  16. Fulltext Optimization for Liquid-Liquid Extraction of Cd(II) over Cu(II) Ions from Aqueous Solutions Using Ionic Liquid Aliquat 336 with Tributyl Phosphate
    Lee LY, Morad N, Ismail N, Talebi A, Rafatullah M
    Int J Mol Sci, 2020 Sep 18;21(18).
    PMID: 32962106 DOI: 10.3390/ijms21186860
    This study investigates the separation of two heavy metals, Cd(II) and Cu(II), from the mixed synthetic feed using a liquid-liquid extraction. The current study uses tri-octyl methylammonium chloride (Aliquat 336) as the extractant (with tributyl phosphate (TBP) as a phase modifier), diluted in toluene, in order to investigate the selective extraction of Cd(II) over Cu(II) ions. We investigate the use of ethylenediaminetetraacetic acid (EDTA) as a masking agent for Cu(II), when added in aqueous feed, for the selective extraction of Cd(II). Five factors that influence the selective extraction of Cd(II) over Cu(II) (the equilibrium pH (pHeq), Aliquat 336 concentration (Aliquat 336), TBP concentration (TBP), EDTA concentration (EDTA), and organic to aqueous ratio (O:A)) were analyzed. Results from a 25-1 fractional factorial design show that Aliquat 336 significantly influenced Cd(II) extraction, whereas EDTA was statistically significant for the antagonistic effect on the E% of Cu(II) in the same system. Moreover, results from optimization experiment showed that the optimum conditions are Aliquat 336 concentration of 99.64 mM and EDTA concentration of 48.86 mM-where 95.89% of Cd(II) was extracted with the least extracted Cu(II) of 0.59%. A second-order model was fitted for optimization of Cd(II) extraction with a R2 value of 0.998, and ANOVA results revealed that the model adequately fitted the data at a 5% significance level. Interaction between Aliquat 336 and Cd(II) has been proven via FTIR qualitative analysis, whereas the addition of TBP does not affect the extraction mechanism.
    Matched MeSH terms: Toluene/chemistry
  17. Fulltext A case study: Chemical health risk assessment in three footwear small industries in Bogor-Indonesia year 2019
    Savira YM, Tejamaya M, Putri AA
    Gac Sanit, 2021 12 22;35 Suppl 2:S374-S378.
    PMID: 34929854 DOI: 10.1016/j.gaceta.2021.10.054
    OBJECTIVE: This study aimed to analyse the health risks related to the use of chemicals among workers in small footwear factories.

    METHODS: This was a descriptive case study conducted in three selected small footwear factories located in Ciomas, Bogor, Indonesia. The assessment was conducted using the chemical health risk assessment method by the Department of Safety and Health Malaysia Year 2018.

    RESULTS: Results showed that the level of risk of chemicals through inhalation fell on the moderate and high-risk categories, indicating that high exposure could lead to carcinogenic effects. Dermal exposure was categorised as moderate risk, causing such health effects as skin and eye irritation.

    CONCLUSION: Factory X, Y, and Z have been found to have a significant risk of hazardous chemical exposure (i.e., benzene and toluene), specifically at the glueing stations, either from inhalation or dermal contact.

    Matched MeSH terms: Toluene/analysis
  18. Effective toluene oxidation under ozone over mesoporous MnOx/γ-Al2O3 catalyst prepared by solvent deficient method: Effect of Mn precursors on catalytic activity
    Reddy KHP, Kim BS, Lam SS, Jung SC, Song J, Park YK
    Environ Res, 2021 04;195:110876.
    PMID: 33592225 DOI: 10.1016/j.envres.2021.110876
    In this study, the role of manganese precursors in mesoporous (meso) MnOx/γ-Al2O3 catalysts was examined systematically for toluene oxidation under ozone at ambient temperature (20 °C). The meso MnOx/γ-Al2O3 catalysts developed with Mn(CH3COO)2, MnCl2, Mn(NO3)2.4H2O and MnSO4 were prepared by an innovative single step solvent-deficient method (SDM); the catalysts were labeled as MnOx/Al2O3(A), MnOx/Al2O3(C), MnOx/Al2O3(N), and MnOx/Al2O3(S), respectively. Among all, MnOx/Al2O3(C) showed superior performance both in toluene removal (95%) as well as ozone decomposition (88%) followed by acetate, nitrate and sulphated precursor MnOx/Al2O3. The superior performance of MnOx/Al2O3(C) in the oxidation of toluene to COx is associated with the ozone decomposition over highly dispersed MnOx in which extremely active oxygen radicals (O2-, O22- and O-) are generated to enhance the oxidation ability of the catalysts greatly. In addition, toluene adsorption over acid support played a vital role in this reaction. Hence, the properties such as optimum Mn3+/Mn4+ ratio, acidic sites, and smaller particle size (≤2 nm) examined by XPS, TPD of NH3, and TEM results are playing vital role in the present study. In summary, the MnOx/Al2O3 (C) catalyst has great potential in environmental applications particularly for the elimination of volatile organic compounds with low loading of manganese developed by SDM.
    Matched MeSH terms: Toluene
  19. Fulltext Synthesis of UV-curable hyperbranched urethane acrylate from palm oil oleic acid
    Mek Zah Salleh, Khairiah Badri, Sahrim Ahmad, Mohd Hilmi Mahmood
    Journal of Nuclear and Related Technologies, 2010;2010(2):38-48.
    MyJurnal
    UV-curable hyperbranched urethane acrylate (HBPUA) from oleic acid of palm oil has been synthesized through a medium aided by p-toluene sulfonic acid as a catalyst. This mixture was then used as the core (HBP) and reacted with palm oil oleic acid to form the hyperbranched polyol (HBP-1). HBPUA was prepared by reacting HBP-1 resin with diisocyanate and hydroxyl-containing acrylate monomer with the presence of 0.1-2 wt% dibutyltin dilaurate as a catalyst. The reaction was confirmed by several analytical data i.e. hydroxyl value (OHV), Fourier Transform infrared (FTIR) spectroscopy, gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy analyses. The HBPUA was easily curable when subjected to ultraviolet (UV) radiation.
    Matched MeSH terms: Toluene
  20. Liquefaction of kenaf (Hibiscus cannabinus L.) core for wood laminating adhesive
    Juhaida MF, Paridah MT, Mohd Hilmi M, Sarani Z, Jalaluddin H, Mohamad Zaki AR
    Bioresour Technol, 2010 Feb;101(4):1355-60.
    PMID: 19833509 DOI: 10.1016/j.biortech.2009.09.048
    A study was carried out to produce polyurethane (PU) as a wood laminating adhesive from liquefied kenaf core (LKC) polyols by reacting it with toluene-2,4-diisocyanate (TDI) and 1,4-butanediol (BDO). The LKC polyurethane (LKCPU) adhesive has a molecular weight (MW) of 2666, viscosity of 5370 mPa s, and solids content of 86.9%. The average shear strength of the rubberwood (RW) bonded with LKCPU adhesive was 2.9 MPa. Most of the sheared specimens experienced a total adhesive failure. The formation of air bubbles through the liberation of carbon dioxide was observed to reduce the adhesive penetration and bonding strength which was obviously seen on the sheared specimens. The percentage of catalyst used can be varied based on the usage and working time needed. Nonetheless, the physical properties of LKCPU produced in this work had shown good potential as edge-bonding adhesive.
    Matched MeSH terms: Toluene 2,4-Diisocyanate/chemistry
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links