Displaying publications 1 - 20 of 545 in total

Abstract:
Sort:
  1. Purmal K, Alam MK, Pohchi A, Abdul Razak NH
    PLoS One, 2013;8(12):e84202.
    PMID: 24367643 DOI: 10.1371/journal.pone.0084202
    Intermaxillary (IMF) screws feature several advantages over other devices used for intermaxillary fixation, but using cone beam computed tomography (CBCT) scans to determine the safe and danger zones to place these devices for all patients can be expensive. This study aimed to determine the optimal interradicular and buccopalatal/buccolingual spaces for IMF screw placement in the maxilla and mandible. The CBCT volumetric data of 193 patients was used to generate transaxial slices between the second molar on the right to the second molar on the left in both arches. The mean interradicular and buccopalatal/buccolingual distances and standard deviation values were obtained at heights of 2, 5, 8 and 11 mm from the alveolar bone crest. An IMF screw with a diameter of 1.0 mm and length of 7 mm can be placed distal to the canines (2 - 11 mm from the alveolar crest) and less than 8 mm between the molars in the maxilla. In the mandible, the safest position is distal to the first premolar (more than 5 mm) and distal to the second premolar (more than 2 mm). There was a significant difference (p<0.05) between the right and left quadrants. The colour coding 3D template showed the safe and danger zones based on the mesiodistal, buccopalatal and buccolingual distances in the maxilla and mandible.The safest sites for IMF screw insertion in the maxilla were between the canines and first premolars and between the first and second molars. In the mandible, the safest sites were between the first and second premolars and between the second premolar and first molar. However, the IMF screw should not exceed 1.0 mm in diameter and 7 mm in length.
    Matched MeSH terms: Tooth/radiography
  2. Kamal A, Salman B, Razak NHA, Samsudin ABR
    Eur J Dent, 2020 Oct;14(4):613-620.
    PMID: 32777838 DOI: 10.1055/s-0040-1714765
    OBJECTIVE:  A dry socket is a well-recognized complication of wound healing following tooth extraction. Its etiology is poorly understood and commonly occur among healthy patients. As such, management strategies for dry socket has always been empirical rather than scientific with varying outcome. The aim of this study is to investigate the efficacy of concentrated growth factor (CGF) and low-level laser therapy (LLLT) and compared them to the conventional treatment in the management of dry socket.

    MATERIALS AND METHODS:  Sixty patients with one dry socket each, at University Dental Hospital Sharjah, were divided into three treatment groups based on their choice. In group I (n = 30), conventional treatment comprising of gentle socket curettage and saline irrigation was done. Group II (n = 15) dry sockets were treated with CGF and group III (n = 15) sockets were lased with LLLT. All dry socket patients were seen at day 0 for treatment and subsequently followed-up at 4, 7, 14, and 21 days. Pain score, perisocket inflammation, perisocket tenderness, and amount of granulation tissue formation were noted.

    STATISTICAL ANALYSIS:  Data were analyzed as mean values for each treatment group. Comparisons were made for statistical analysis within the group and among the three groups to rank the efficacy of treatment using one-way analysis of variance (ANOVA). Statistically significant difference is kept at p < 0.05.

    RESULTS:  Conventional treatment group I took more than 7 days to match the healing phase of group II CGF treated socket and group III LLLT irradiated socket (p = 0.001). When healing rate between CGF and LLLT are compared, LLLT group III showed a delay of 4 days compared with CGF in granulation tissue formation and pain control.

    CONCLUSION:  CGF treated socket was superior to LLLT in its ability to generate 75% granulation tissue and eliminate pain symptom by day 7 (p = 0.001).

    Matched MeSH terms: Tooth Extraction
  3. Elenjikal MJ, Latheef AA, Kader MAM, Ganapathy S, Mohamed AB, Sainudeen SS, et al.
    J Pharm Bioallied Sci, 2019 May;11(Suppl 2):S450-S456.
    PMID: 31198386 DOI: 10.4103/JPBS.JPBS_75_19
    Background: Root resorption is the loss of dental hard tissues as a result of clastic activities. It might be broadly classified into external or internal resorption by the location of the resorption in relation to the root surface. the various techniques used these days for filling internal resorption include warm condensation, vertical condensation, core techniques, thermoplasticized gutta-percha, warm vertical compaction, and cold lateral condensation.

    Objectives: The aims and objectives of this study were to compare the quality of root fillings in artificially created internal resorption cavities filled with warm vertical compaction, lateral condensation, Obtura II along with System B, E and Q plus along with System B, and Thermafil, and to calculate the percentage of gutta-percha, sealer, and voids using an ImageJ software.

    Results: Results between the warm vertical compaction (group I), lateral condensation (group II), Obtura II with System B (group III), E and Q plus with System B (group IV), and Thermafil (group V), group III showed the highest percentage of gutta-percha plus sealer and gutta-percha, and least number of voids, which was statistically significant (P < 0.000).

    Conclusion: It can be concluded that Obtura II along with System B was found to be the most suitable obturation technique for the management of teeth exhibiting internal resorption. Thermafil was found to give the poorest obturation quality when used to fill the teeth with internal resorption. Similarly, lateral condensation technique was observed to show maximum sealer and hence was not ideal for the management of internal resorptive cavities.

    Matched MeSH terms: Tooth Root
  4. Lim D, Ngeow WC
    J Oral Maxillofac Surg, 2017 Nov;75(11):2278-2286.
    PMID: 28666096 DOI: 10.1016/j.joms.2017.05.033
    PURPOSE: To compare the efficacy of preoperative submucosal injection of 4 mg of dexamethasone versus 40 mg of methylprednisolone in reducing postoperative sequelae after surgical removal of impacted mandibular third molars.

    PATIENTS AND METHODS: This prospective, randomized, double-blind study included 65 patients who required surgical removal of impacted mandibular third molars with Class II or position B impaction (Pell and Gregory classification). Patients were randomly assigned to 1 of 3 groups: dexamethasone, methylprednisolone, or placebo (control). Surgery was performed with patients under local anesthesia. Baseline measurements were obtained preoperatively, and subsequent assessments were made on postoperative day 1, 2, 5, and 7 to measure postoperative facial swelling by use of 2 linear measurements: interincisal mouth opening width and visual analog scale score for pain. The amount of analgesics consumed was recorded. Wound healing also was assessed on postoperative day 7. Descriptive and multivariate statistics were computed, and significance was set at P 

    Matched MeSH terms: Tooth Extraction*; Tooth, Impacted/surgery*
  5. Ahmed HMA, Keleş A, Wolf TG, Rossi-Fedele G, Dummer PMH
    Eur Endod J, 2024 Jan 01;9(1):1-7.
    PMID: 37990574 DOI: 10.14744/eej.2023.82713
    Matched MeSH terms: Tooth Crown/anatomy & histology
  6. Ngeow, W.C., Anuar, A.M.
    Ann Dent, 2004;11(1):-.
    MyJurnal
    A retrospective study was carried out to review the records of 47 patients who had had in total 80 supernumerary teeth (ST) removed under general anaesthesia between 1975 and 2002. Malays made up 38.30%, Chinese 51.06%, and Indians 10.64% of the patients. The predominant age group was 6-10 year-old. The mean age was 12.96 ± 9.49 years. The male and female ratio was 1.35:1. Most of the patients had either one ST (n=31; 65.96%) or two ST (n=11; 23.40%). Five cases of multiple supernumeraries were recorded. Two patients experienced late formation of subsequent ST after the first surgery, thus requiring a second surgery. The majority of ST were conical in shape (n=35; 43.75%). Most of the ST were located in the premaxilla (n=55; 68.8%). Almost a quarter (23.75%) of ST were inclined towards the oral cavity. Some of the effects on the dentition were diastema, cystic changes, rotation, displacement, and retention of the permanent teeth and these were the indications for removal of ST. The most common surgical approach for maxillary ST was from the labial, buccal or labio-buccal approach.
    Matched MeSH terms: Tooth, Supernumerary
  7. Ayub NAFM, Hamzah SH, Hussein AS, Rajali A, Ahmad MS
    Spec Care Dentist, 2021 Jan;41(1):111-117.
    PMID: 33080065 DOI: 10.1111/scd.12532
    Cleidocranial dysplasia (CCD) is a rare bone disorder. The main dental features are the presence of multiple retained deciduous teeth and supernumerary teeth, as well as unerupted permanent teeth. To date, CCD is managed by a combination approach, which consists of the extraction of deciduous and supernumerary teeth, followed by orthodontic traction of unerupted permanent teeth. This case highlights the management of a girl with CCD, who refused the recommended protocol. A 15-year-old Malay female presented with a complaint of retained deciduous teeth. Intraoral examination revealed multiple retained deciduous teeth. Radiographs showed numerous impacted supernumerary and unerupted permanent teeth. The patient opted to improve her facial appearance with a less aggressive treatment option. A composite build-up on all anterior maxillary deciduous teeth was carried out until the patient was ready to undergo surgical intervention.
    Matched MeSH terms: Tooth Abnormalities*; Tooth Eruption
  8. Lui JL
    Dent Traumatol, 2001 Oct;17(5):227-30.
    PMID: 11678543
    The composite reinforcement technique has been used clinically to salvage damaged root-filled teeth compromised by caries, trauma, developmental abnormalities, internal resorption and iatrogenic causes. This clinical case report describes the use of the technique to reattach a fractured fragment in a compromised endodontically treated root besides reinforcing it for continued function in the mouth. Factors of clinical importance related to this additional application; including reattachment of tooth fragments, post crown retention, coronal microleakage and fracture resistance and strength, are also briefly discussed.
    Matched MeSH terms: Tooth Fractures/therapy*; Tooth Root/injuries*
  9. Reddy KB, Dash S, Kallepalli S, Vallikanthan S, Chakrapani N, Kalepu V
    J Contemp Dent Pract, 2013 Nov 1;14(6):1028-35.
    PMID: 24858745
    The present study was conducted to compare the cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper).
    Matched MeSH terms: Tooth Apex/ultrastructure
  10. Wang CY, Chiu CL, Har KO, Chan C, Rahman ZA
    Int J Oral Maxillofac Surg, 2002 Oct;31(5):506-10.
    PMID: 12418566
    This study compares the use of inhalation sedation using sevoflurane (group S) with inhalation sedation using nitrous oxide (group N) in patients undergoing bilateral extraction of third molar teeth under local anaesthesia. The study was designed as a cross-over study. Seventeen ASA I, day surgery patients were studied. Patients were randomly allocated to receive either 8 l/min 50% nitrous oxide in oxygen (group N) or same flow of 1% sevoflurane (group S) for the first procedure. Each patient then had the alternate method of sedation for the second procedure. There were no significant differences between the methods in patient co-operation and surgeon's satisfaction with sedation. Psychomotor tests were comparable in both groups. The patients were significantly more sedated in the group S compared to group N (P=0.004). Significantly more patients complained of an unpleasant odour group S (P<0.01) but none withdrew from the study for this reason. No adverse cardiorespiratory effects resulted from sevoflurane or nitrous oxide sedation. Both methods gave good amnesia during the procedure. There was high acceptance of both methods and the patients rated the technique as equally satisfactory. We conclude that inhalation sedation with sevoflurane is a suitable alternative method to nitrous oxide sedation.
    Matched MeSH terms: Tooth Extraction
  11. Kanneppady SK, Balamanikandasrinivasan, Kumaresan R, Sakri SB
    Dent Res J (Isfahan), 2013 May;10(3):353-8.
    PMID: 24019804
    The patterns of facial growth, jaw and tooth size are inherited and are likely to differ among population and races. Aim of this study is to evaluate and compare the pattern of third molar (3M) impaction among three different ethnic groups (Chinese, Indian, Malay) of patients attending AIMST Dental Institute, Malaysia.
    Matched MeSH terms: Tooth, Impacted
  12. Seow LL, Toh CG, Fok AS, Wilson NH
    Am J Dent, 2008 Oct;21(5):331-6.
    PMID: 19024261
    PURPOSE: To investigate the level and distribution of stresses in endodontically treated maxillary premolar teeth restored using various cavity designs of bonded all-ceramic restorations. The hypothesis tested was that the various all-ceramic approaches, including incorporating a pulp chamber extension in the restoration, had no influence on the stresses in the restored tooth unit.
    METHODS: Finite element packages Patran and Abaqus were used for the stress analysis. The cavity designs investigated include: (1) inlay (I); (2) inlay with palatal cusp coverage (IPC); (3) onlay (O); (4) inlay with pulp chamber extension (IPE); (5) inlay with palatal cusp coverage and pulp chamber extension (IPCPE); and (6) onlay with pulp chamber extension (OPE).
    RESULTS: In each case, tensile stresses were found to be concentrated subjacent to the occlusal fossa. Peak tensile stress and peak shear stress values along the tooth/restoration interface for IPC, O IPCPE and OPE cavity designs were found to be associated with the axiogingival line angle. Overall, the order of the various forms of restoration investigated in terms of the maximum principal stress (from greatest to lowest) was as follows: IPE > IPCPE > OPE > I > IPC > O.
    Matched MeSH terms: Tooth, Nonvital*
  13. Takaoka H, Low VL, Tan TK, Sofian-Azirun M, Chen CD, Lau KW, et al.
    Acta Trop, 2019 Feb;190:320-328.
    PMID: 30496721 DOI: 10.1016/j.actatropica.2018.11.025
    Simulium pumatense sp. nov. is described from Vietnam, and is placed in the Simulium feuerborni species-group of the subgenus Simulium (Nevermannia) Enderlein. Its morphological characteristics include the relatively smaller numbers of the following three numerical features: inner teeth of the female mandible (15-18), minute conical processes (16) on the female cibarium, and male upper-eye facets (in 15 vertical columns and 16 horizontal rows). Keys are constructed to distinguish this species from four species of the same group in Vietnam. Our molecular analysis of the DNA barcoding COI gene shows that this species is most closely related to cytoform A of the S. feuerborni complex from Thailand.
    Matched MeSH terms: Tooth/anatomy & histology*
  14. Al-Siweedi SYA, Ngeow WC, Nambiar P, Abu-Hassan MI, Ahmad R, Asif MK, et al.
    Folia Morphol (Warsz), 2023;82(2):315-324.
    PMID: 35285511 DOI: 10.5603/FM.a2022.0024
    BACKGROUND: The purpose of this study was to identify and classify the anatomic variation of mandibular canal among Malaysians of three ethnicities.

    MATERIALS AND METHODS: The courses of the mandibular canal in 202 cone-beam computed tomography scanned images of healthy Malaysians were evaluated, and trifid mandibular canal (TMC) when present, were recorded and studied in detail by categorizing them to a new classification (comprising of 12 types). The diameter and length of canals were also measured, and their shape determined.

    RESULTS: Trifid mandibular canals were observed in 12 (5.9%) subjects or 16 (4.0%) hemi-mandibles. There were 10 obvious categories out the 12 types of TMCs listed. All TMCs (except one) were observed in patients older than 30 years. The prevalence according to ethnicity was 6 in Malays, 5 in Chinese and 1 in Indian. Four (33.3%) patients had bilateral TMCs, which was not seen in the Indian subject. More than half (56.3%) of the accessory canals were located above the main mandibular canal. Their mean diameter was 1.32 mm and 1.26 mm for the first and second accessory canal, and the corresponding lengths were 20.42 mm and 21.60 mm, respectively. Most (62.5%) canals had irregularly shaped lumen; there were more irregularly shaped canals in the second accessory canal than the first branch. None of the second accessory canal was oval (in shape).

    CONCLUSIONS: This new classification can be applied for the variations in the branching pattern, length and shape of TMCs for better clinical description.

    Matched MeSH terms: Tooth Root*
  15. Salas H, Torres J, Pauro J, Ahmed HMA
    Int Endod J, 2021 Jan;54(1):147-149.
    PMID: 33351981 DOI: 10.1111/iej.13439
    Matched MeSH terms: Tooth Root*
  16. Ahmed HMA, Versiani MA, De-Deus G, Dummer PMH
    Int Endod J, 2017 Aug;50(8):761-770.
    PMID: 27578418 DOI: 10.1111/iej.12685
    Knowledge of root and root canal morphology is a prerequisite for effective nonsurgical and surgical endodontic treatments. The external and internal morphological features of roots are variable and complex, and several classifications have been proposed to define the various types of canal configurations that occur commonly. More recently, improvements in nondestructive digital image systems, such as cone-beam and micro-computed tomography, as well as the use of magnification in clinical practice, have increased the number of reports on complex root canal anatomy. Importantly, using these newer techniques, it has become apparent that it is not possible to classify many root canal configurations using the existing systems. The purpose of this article is to introduce a new classification system that can be adapted to categorize root and root canal configurations in an accurate, simple and reliable manner that can be used in research, clinical practice and training.
    Matched MeSH terms: Tooth Root/anatomy & histology*
  17. Ahmed HMA, Dummer PMH
    Int Endod J, 2018 Apr;51(4):389-404.
    PMID: 29023779 DOI: 10.1111/iej.12867
    Understanding the normal anatomical features as well as the more unusual developmental anomalies of teeth, roots and root canals is essential for successful root canal treatment. In addition to various types of root canal configuration and accessory canal morphology, a wide range of developmental tooth, root and canal anomalies exists, including C-shaped canals, dens invaginatus, taurodontism, root fusion, dilacerations and palato-gingival grooves. There is a direct association between developmental anomalies and pulp and periradicular diseases that usually require a multidisciplinary treatment approach to achieve a successful outcome. A number of classifications have categorized tooth, root and canal anomalies; however, several important details are often missed making the classifications less than ideal and potentially confusing. Recently, a new coding system for classifying root, root canal and accessory canal morphology has been introduced. The purpose of this article is to introduce a new system for classifying tooth, root and canal anomalies for use in research, clinical practice and training, which can serve as complementary codes to the recently described system for classifying root, as well as main and accessory canal morphology.
    Matched MeSH terms: Tooth/anatomy & histology*; Tooth Root/abnormalities*
  18. Hussein NN
    Singapore Dent J, 1985 Jul;10(1):13-5.
    PMID: 3868814
    Matched MeSH terms: Tooth, Impacted/epidemiology; Tooth, Impacted/radiography; Tooth, Supernumerary/epidemiology*; Tooth, Supernumerary/radiography; Tooth, Unerupted/epidemiology; Tooth, Unerupted/radiography
  19. Ramli R, Rahman NA, Rahman RA, Hussaini HM, Hamid AL
    Dent Traumatol, 2011 Apr;27(2):122-6.
    PMID: 21281443 DOI: 10.1111/j.1600-9657.2010.00968.x
    Aetiology of oral and maxillofacial injuries in this country includes motorvehicle accident (MVA), fall, industrial accidents and others. Among these causes, MVA accident is the predominant cause of injury in Malaysia.
    Matched MeSH terms: Tooth Extraction/statistics & numerical data; Tooth Injuries/epidemiology
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links