Geosmin and 2-methylisoborneol (MIB) outbreaks in tropical water bodies, such as Southeast Asia, by actinomycetes have not yet been elucidated in detail. Six Streptomyces isolates from lowland environments in Malaysia were selected and evaluated for their odor production under different temperatures. The gene responsible for the production of geosmin, geoA, was detected in all isolates, while only two isolates harbored tpc, which is responsible for 2-MIB production. This result suggested that geosmin and 2-MIB synthesis pathway genes already existed in the environment in the Tropics of Southeast Asia. Furthermore, our isolates produced musty odor compounds at 30°C, and differences were observed in musty odor production between various temperatures. This result indicated the potential for odor episodes in water bodies of the tropical countries of Southeast Asia throughout the year due to the mean annual ambient temperature of 27°C in the lowlands.
In power system networks, automatic fault diagnosis techniques of switchgears with high accuracy and less time consuming are important. In this work, classification of abnormal location in switchgears is proposed using hybrid gravitational search algorithm (GSA)-artificial intelligence (AI) techniques. The measurement data were obtained from ultrasound, transient earth voltage, temperature and sound sensors. The AI classifiers used include artificial neural network (ANN) and support vector machine (SVM). The performance of both classifiers was optimized by an optimization technique, GSA. The advantages of GSA classification on AI in classifying the abnormal location in switchgears are easy implementation, fast convergence and low computational cost. For performance comparison, several well-known metaheuristic techniques were also applied on the AI classifiers. From the comparison between ANN and SVM without optimization by GSA, SVM yields 2% higher accuracy than ANN. However, ANN yields slightly higher accuracy than SVM after combining with GSA, which is in the range of 97%-99% compared to 95%-97% for SVM. On the other hand, GSA-SVM converges faster than GSA-ANN. Overall, it was found that combination of both AI classifiers with GSA yields better results than several well-known metaheuristic techniques.
Conyza sumatrensis (Retz.) E. H. Walker is an obnoxious weed, emerging as an invasive species globally. Seed germination biology of four populations of the species stemming from arid, semi-arid, temperate, and humid regions was determined in this study. Seed germination was recorded under six different environmental cues (i.e., light/dark periods, constant and alternating day and night temperatures, pH, salinity, and osmotic potential levels) in separate experiment for each cue. Populations were main factor, whereas levels of each environmental cue were considered as sub-factor. The impact of seed burial depths on seedling emergence was inferred in a greenhouse pot experiment. Seed germination was recorded daily and four germination indices, i.e., seed germination percentage, mean germination time, time to reach 50% germination, and mean daily germination were computed. Tested populations and levels of different environmental cues had significant impact on various seed germination indices. Overall, seeds stemming from arid and semi-arid regions had higher seed germination potential under stressful and benign environmental conditions compared to temperate and humid populations. Seed of all populations required a definite light period for germination and 12 hours alternating light and dark period resulted in the highest seed germination. Seed germination of all populations occurred under 5-30°C constant and all tested alternate day and night temperatures. However, the highest seed germination was recorded under 20°C. Seeds of arid and semi-arid populations exhibited higher germination under increased temperature, salinity and osmotic potential levels indicating that maternal environment strongly affected germination traits of the tested populations. The highest seed germination of the tested populations was noted under neutral pH, while higher and lower pH than neutral had negative impact on seed germination. Arid and semi-arid populations exhibited higher seed germination under increased pH compared to temperate and humid populations. Seed burial depth had a significant effect on the seedling emergence of all tested populations. An initial increase was noted in seedling emergence percentage with increasing soil depth. However, a steep decline was recorded after 2 cm seed burial depth. These results indicate that maternal environment strongly mediates germination traits of different populations. Lower emergence from >4 cm seed burial depth warrants that deep burial of seeds and subsequent zero or minimum soil disturbance could aid the management of the species in agricultural habitats. However, management strategies should be developed for other habitats to halt the spread of the species.
Several thermostable proteases have been identified, yet only a handful have undergone the processes of cloning, comprehensive characterization, and full exploitation in various industrial applications. Our primary aim in this study was to clone a thermostable alkaline protease from a thermophilic bacterium and assess its potential for use in various industries. The research involved the amplification of the SpSKF4 protease gene, a thermostable alkaline serine protease obtained from the Geobacillus thermoglucosidasius SKF4 bacterium through polymerase chain reaction (PCR). The purified recombinant SpSKF4 protease was characterized, followed by evaluation of its possible industrial applications. The analysis of the gene sequence revealed an open reading frame (ORF) consisting of 1,206 bp, coding for a protein containing 401 amino acids. The cloned gene was expressed in Escherichia coli. The molecular weight of the enzyme was measured at 28 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The partially purified enzyme has its highest activity at a pH of 10 and a temperature of 80°C. In addition, the enzyme showed a half-life of 15 h at 80°C, and there was a 60% increase in its activity at 10 mM Ca2+ concentration. The activity of the protease was completely inhibited (100%) by phenylmethylsulfonyl fluoride (PMSF); however, the addition of sodium dodecyl sulfate (SDS) resulted in a 20% increase in activity. The enzyme was also stable in various organic solvents and in certain commercial detergents. Furthermore, the enzyme exhibited strong potential for industrial use, particularly as a detergent additive and for facilitating the recovery of silver from X-ray film.
The review focuses on the application of supercritical fluids as antisolvents in the pharmaceutical field and demonstrates the supercritical antisolvent method in the use of drug encapsulation. The main factors for choosing the solvent and biodegradable polymer to produce fine particles to ensure effective drug delivery are emphasized and the effect of polymer structure on drug encapsulation is illustrated. The review also demonstrates the drug release mechanism and polymeric controlled release system, and discusses the effects of the various conditions in the process, such as pressure, temperature, concentration, chemical compositions (organic solvents, drug, and biodegradable polymer), nozzle geometry, CO(2) flow rate, and the liquid phase flow rate on particle size and its distribution.
Assessment of transit through the gastrointestinal tract provides useful information regarding gut physiology and patho-physiology. Although several methods are available, each has distinct advantages and limitations. Recently, an ingestible wire-less motility capsule (WMC), similar to capsule video endoscopy, has become available that offers a less-invasive, standardized, radiation-free and office-based test. The capsule has 3 sensors for measurement of pH, pressure and temperature, and collec-tively the information provided by these sensors is used to measure gastric emptying time, small bowel transit time, colonic transit time and whole gut transit time. Current approved indications for the test include the evaluation of gastric emptying in gastroparesis, colonic transit in constipation and evaluation of generalised dysmotility. Rare capsule retention and malfunc-tion are known limitations and some patients may experience difficulty with swallowing the capsule. The use of WMC has been validated for the assessment of gastrointestinal transit. The normal range for transit time includes the following: gastric empty-ing (2-5 hours), small bowel transit (2-6 hours), colonic transit (10-59 hours) and whole gut transit (10-73 hours). Besides avoiding the use of multiple endoscopic, radiologic and functional gastrointestinal tests, WMC can provide new diagnoses, leads to a change in management decision and help to direct further focused work-ups in patients with suspected disordered motility. In conclusion, WMC represents a significant advance in the assessment of segmental and whole gut transit and mo-tility, and could prove to be an indispensable diagnostic tool for gastrointestinal physicians worldwide.
Deep sea water (DSW) commonly refers to a body of seawater that is pumped up from a depth of over 200 m. It is usually associated with the following characteristics: low temperature, high purity, and being rich with nutrients, namely, beneficial elements, which include magnesium, calcium, potassium, chromium, selenium, zinc, and vanadium. Less photosynthesis of plant planktons, consumption of nutrients, and organic decomposition have caused lots of nutrients to remain there. Due to this, DSW has potential to become a good source for health. Research has proven that DSW can help overcome health problems especially related to lifestyle-associated diseases such as cardiovascular disease, diabetes, obesity, cancer, and skin problems. This paper reviews the potential health benefits of DSW by referring to the findings from previous researches.
Protein hydrolysates produced from different food sources exhibit therapeutic potential and can be used in the management of chronic diseases. This study was targeted to optimise the conditions for the hydrolysis of stone fish protein to produce antioxidant hydrolysates using central composite design (CCD) by response surface methodology (RSM). The stone fish protein was hydrolysed under the optimum predicted conditions defined by pH (6.5), temperature (54°C), E/S ratio (1.5%), and hydrolysis time (360 min). The hydrolysates were then evaluated for 2,2-diphenyl-1-picrylhydrazyl radical (DPPH•) scavenging activity and ferrous ion- (Fe2+-) chelating activity. Results validation showed no significant difference between the experimental values of DPPH• scavenging activity (48.94%) and Fe2+-chelating activity (25.12%) obtained at 54.62% degree of hydrolysis (DH) compared to their corresponding predicted values of 49.79% and 24.08% at 53.08% DH, respectively. The hydrolysates demonstrated non-Newtonian behavior (n < 1) with stronger shear-thinning effect and higher viscosities at increasing concentration. Thus, RSM can be considered as a promising strategy to optimise the production of stone fish protein hydrolysates containing antioxidant peptides. It is hoped that this finding will enhance the potential of stone fish protein hydrolysates (SHs) as therapeutic bioactive ingredient in functional foods development.
Gout is a common disease affected most of the people due to the elevation of uric acid in the blood. Flavonoid and phenolic compounds are reported to exert the anti-gout activity of medicinal plants. Hence, this study aimed at optimizing the extraction conditions of phenolic and flavonoid compounds as well as the anti-gout (xanthine oxidase inhibitory activity) in vitro of Euphorbia hirta using response surface methodology (RSM). The plant part used was the whole plant excluding roots. The effects of three independent variables (extraction time, X1; extraction temperature, X2; and solid-to-liquid ratio, X3) on three response variables (total flavonoid content, Y1; total phenolic content, Y2; and xanthine oxidase inhibitory activity, Y3) were determined using central composite design (CCD) while phytochemical profiling of the extracts was determined by liquid chromatography-mass spectrometry (LC-MS). Quadratic models produced a satisfactory fitting of the experimental data with regard to total flavonoid content (r2 = 0.9407, p < 0.0001), total phenolic content (r2 = 0.9383, p < 0.0001), and xanthine oxidase inhibitory activity (r2 = 0.9794, p < 0.0001). The best extraction conditions observed for total flavonoid content, total phenolic content, and xanthine oxidase inhibitory activity were at a temperature of 79.07°C for 17.42 min with solid-to-liquid ratio of 1 : 20 g/ml. The optimum values for total flavonoid, total phenolic, and xanthine oxidase inhibitory activity were 67.56 mg RE/g, 155.21 mg GAE/g, and 91.42%, respectively. The main phytochemical compounds in the optimized E. hirta extract are neochlorogenic acid, quercetin-3β-D-glucoside, syringic acid, caffeic acid, ellagic acid, astragalin, afzelin, and quercetin. As conclusion, this study clearly demonstrated the best conditions to obtain higher xanthine oxidase inhibitory activity and phytochemical compounds which can be further used for the development of anti-gout agents.
This study was performed to explore the effects of virgin coconut oil (VCO) in male rats that were fed with repeatedly heated palm oil on blood pressure, plasma nitric oxide level, and vascular reactivity. Thirty-two male Sprague-Dawley rats were divided into four groups: (i) control (basal diet), (ii) VCO (1.42 mL/kg, oral), (iii) five-times-heated palm oil (15%) (5HPO), and (iv) five-times-heated palm oil (15%) and VCO (1.42 mL/kg, oral) (5HPO + VCO). Blood pressure was significantly increased in the group that was given the 5HPO diet compared to the control group. Blood pressure in the 5HPO + VCO group was significantly lower than the 5HPO group. Plasma nitric oxide (NO) level in the 5HPO group was significantly lower compared to the control group, whereas in the 5HPO + VCO group, the plasma NO level was significantly higher compared to the 5HPO group. Aortic rings from the 5HPO group exhibited attenuated relaxation in response to acetylcholine and sodium nitroprusside as well as increased vasoconstriction to phenylephrine compared to the control group. Aortic rings from the 5HPO + VCO group showed only attenuated vasoconstriction to phenylephrine compared to the 5HPO group. In conclusion, VCO prevents blood pressure elevation and improves endothelial functions in rats fed with repeatedly heated palm oil.
Melastoma malabathricum Linn. is a shrub that comes with beautiful pink or purple flowers and has berries-like fruits rich in anthocyanins. This study was carried out with the aim to evaluate the inhibitory activities of different concentrations of the M. malabathricum Linn. flower and fruit crude extracts against Listeria monocytogenes IMR L55, Staphylococcus aureus IMR S244, Escherichia coli IMR E30, and Salmonella typhimurium IMR S100 using the disc diffusion method. The lowest concentrations of the extracts producing inhibition zones against the test microorganisms were used to determine their minimum inhibitory concentrations (MICs) and minimum bactericidal concentrations (MBCs). In addition, the growth of Listeria monocytogenes IMR L55 and Staphylococcus aureus IMR S244 grown in medium supplemented with the respective extracts at different temperatures (4°C, 25°C, and 37°C) and pHs (4, 6, 7, and 8) was determined.
One of the potentials of carrier-free cross-linked enzyme aggregates (CLEA) immobilization is the ability to be separated and reuse. Yet, it might be impeded by the poor mechanical stability resulting low recyclability. CLEA of CGTase from Bacillus lehensis G1 (CGTase G1-CLEA) using chitosan (CS) as a cross-linker demonstrated high activity recovery however, displayed poor reusability. Therefore, the relationship between mechanical strength and reusability is studied by enhancing the CS mechanical properties and applying a new co-aggregation approach. Herein, CS was chemically cross-linked with glutaraldehyde (GA) and GA was introduced as a co-aggregant (coGA). CGTase G1-CLEA developed using an improved synthesized chitosan-glutaraldehyde (CSGA) cross-linker and a new coGA technique showed to increase its mechanical stability which retained 63.4% and 52.2%, respectively compared to using CS that remained 33.1% of their initial activity after stirred at 500 rpm. The addition of GA impacted the morphology and interaction consequently stabilizing the CLEAs durability in production of cyclodextrins. As a result, the reusability of CGTase G1-CLEA with CSGA and coGA increased by 56.6% and 42.8%, respectively compared to previous CLEA after 5 cycles for 2 h of reaction. This verifies that the mechanical strength of immobilized enzyme influences the improvement of its operational stability.
Heat production (HP) of male and female mouse deer during eating, standing and sitting was determined using the open circuit respiration chamber (RC). The time taken for similar activities was also determined in an outdoor enclosure (OD). The animals were fed kangkong (Ipomoea aquatica), sweet potato (Ipomoea batatas) and rabbit pellet ad libitum. Male mouse deer consumed more dry matter (DM), organic matter (OM) and gross energy (GE) than female. The time for each activity of male and female mouse deer kept in RC and OD was similar. The average time spent in RC and OD for both male and female, respectively, for sitting (956 and 896 min/day) was significantly (P<0.01) longer than standing (463 and 520 min/day) and eating (21 and 24 min/day). Heat production for male and female mouse deer, respectively, during eating was the highest (0.44 and 0.43 kJ/kg W(0.75)/min) followed by standing (0.37 and 0.33 kJ/kgW(0.75)/min) and sitting (0.26 and 0.26 kJ/kg W(0.75)/min). The difference in HP per min during standing between male and female was significant (P<0.05). The HP for 08.00-14.00 h and 14.00-20.00 h periods were higher than 20.00-02.00 h and 02.00-08.00 h periods. The overall HP for males during 08.00-14.00 h and 14.00-20.00 h periods were significantly (P<0.05) higher (114.8 and 119.2 kJ/kg W(0.75)) than female (107.5 and 110.4 kJ/kg W(0.75)), respectively.
Farmers in tropical countries have been impacted by slow-onset heat stress. By comparing the nature of farming activities performed by conventional farmworkers and agroecological farmers, this study examined the changes in physiological health in responses to heat exposure through a six-month longitudinal study. Throughout the six-month follow-up period, the heat stress index (HSI), physiological strain indices (PSI), and physiological health parameters (BMI, blood glucose level, blood cholesterol level, uric acid level) were measured and repeated every two-month. Physiological parameters were recorded twice daily, before and during their first lunch break. This study found that slow-onset heat stress affects farmers differently. The health of agroecological farmers is more resistant to slow-onset extreme temperatures. Pre-existing metabolic health effects from pesticide exposure make conventional farmers more susceptible to extreme temperatures, delaying their bodies' adaptation to rising temperatures.
The work was aimed at evaluating the adsorptive properties of waste newspaper (WN) activated carbons chemically produced using sodium salts for methylene blue (MB) and congo red (CR) removal. The activated carbons, designated as AC1, AC2, AC3 and AC4 were prepared through impregnation with NaH2PO4, Na2CO3, NaCl and NaOH, respectively and activation at 500 °C for 1 h. The activated carbons were characterized for surface chemistry, thermal stability, specific area, morphology and composition. The AC1 with a surface area of 917 m2/g exhibits a greater MB capacity of 651 mg/g. Meanwhile, a greater CR capacity was recorded by AC2 at 299 mg/g. The pseudo-second order model fitted well with the kinetic data, while the equilibrium data could be described by Langmuir model. The thermodynamic parameters, i.e.., positive ΔH°, negative ΔG° and positive ΔS° suggest that the adsorption of dyes is endothermic, spontaneous and feasible at high solution temperature. To conclude, WN is a potential cellulose source for producing activated carbon, while NaH2PO4 activation could be employed to convert WN into activated carbon for effective dye wastewater treatment.
Surveillance of mosquitoes and their distribution in association with rainfall, relative humidity, and temperature were conducted in selected suburban and forested areas, namely, Sungai Penchala (Kuala Lumpur) and Taman Alam (Selangor) for 12 months. Armigeres kesseli was the most abundant species in Sungai Penchala while Aedes butleri was the most dominant species in Taman Alam. A positive correlation between mosquito distribution and rainfall was observed in selected mosquito species in Sungai Penchala (Armigeres kesseli, r = 0.75; Armigeres subalbatus, r = 0.62; and Aedes albopictus, r = 0.65) and Taman Alam (Armigeres sp, r = 0.59; Ae. butleri, r = 0.85; and Ae. albopictus, r = 0.62). However, no significant cor- relation was found either between selected mosquito species in both study areas and relative humidity or temperature. Results obtained suggested that vector control programs to be conducted based on temporal distribution of vectors in order to achieve beneficial outcomes with effective costing.
Dengue 2 and 4 viruses obtained from dengue-infected patients were maintained in a C6/36 Aedes albopictus Skuse cell line and used to infect adult female Aedes aegypti mosquitoes. Each serotype was mixed separately with fresh human erythrocytes and fed to adult female mosquitoes using an artificial membrane feeding technique. Fully engorged mosquitoes were selected and retained at 26 degrees C, 28 degrees C and 30 degrees C to observe dengue virus development in Aedes vectors. Virus detection was carried out by reverse-transcriptase polymerase chain reaction (RT-PCR). The virus was first detected on Day 9 at 26 degrees C and 28 degrees C and on Day 5 at 30 degrees C for both dengue 2 and 4. The study shows the incubation period of the viruses decreased when the extrinsic incubation temperature increases.
This study investigated the effect of different reheating treatments on gel properties and flavor changes of surimi products. As the reheating temperature increased from 90 °C to 121 °C, the heat-induced proteolysis produced more abundant umami and sweet amino acids, which took part in the conversion of IMP to AMP, thus enhancing the taste profiles. Reheating increased the exposure of active -NH2 terminals in proteins, which boosted Maillard and Strecker reactions with carbonyl compounds originated from fatty acid oxidation, thus not only reducing the aldehydes and esters contents but also lowering the whiteness of surimi products. Reheating at 90 °C prohibited the production of warmed-over flavor (WOF) and well-preserved the textural characteristics, but high temperatures ≥100 °C were prone to generate furan as the major WOF substance and to destroy gel structures. Collectively, this study provides new insights on understanding the role of reheating on sensory properties of surimi products.
The main physical properties of ferroelectric crystals are described, and the macroscopic and microscopic viewpoints are discussed along with some applications, such as in capacitors and nonlinear optics. The emphasis is on physical understanding, while the mathematical level is kept to a minimum or supplemented by graphical representations to make the article more accessible.
The present work reports the biobleaching effect on OPEFB pulp upon utilisation of extracellular xylano-pectinolytic enzymes simultaneously yielded from Bacillus amyloliquefaciens ADI2. The impacts of different doses, retention times, pH, and temperatures required for the pulp biobleaching process were delineated accordingly. Here, the OPEFB pulp was subjected to pre-treatment with xylano-pectinolytic enzymes generated from the same alkalo-thermotolerant isolate that yielded those of higher quality. Remarkable enhanced outcomes were observed across varying pulp attributes: for example, enzyme-treated pulp treated to chemical bleaching sequence generated improved brightness of 11.25%. This resulted in 11.25% of less chlorine or chemical consumption required for obtaining pulp with optical attributes identical to those generated via typical chemical bleaching processes. Ultimately, the reduced consumption of chlorine would minimise the organochlorine compounds found in an effluent, resulting in a lowered environmental effect of paper-making processes overall as a consequence. This will undoubtedly facilitate such environmentally-friendly technology incorporation in the paper pulp industry of today.