Displaying publications 2521 - 2540 of 2920 in total

Abstract:
Sort:
  1. Bong, S.C., Loh, S. P.
    MyJurnal
    This study was conducted to investigate and compare the fatty acids and tocopherols of lipid extracted from marine microalgae, Nannochloropsis oculata (NO) and Tetraselmis suecica (TS) using solvent extraction and supercritical fluid extraction (SFE). Fatty acids and tocopherols were determined in the extracted lipid as functions of the temperature (40, 80oC) and pressure (3000, 5000, 7000, 9000psi). Dichloromethane/methanol and hexane were the chosen conventional solvent for fatty acids and tocopherols extraction respectively. The results obtained showed that there were differences in the fatty acid composition of various lipid extracts of NO and TS. Extracts of NO were high in myristic acid (C14:0) (17-35%), palmitic acid (C16:0) (14-47%) and palmitoleic acid (C16:1) (11-42%) whereas extracts of TS were high in C14:0 (21-34%) and C16:0 (29-49%). Eicosapentaenoic acid (EPA) was detected only under certain SFE conditions in NO but was not detected in TS. α-, β- and γ-tocopherol were detected in various SFE extracts of NO but only α- and β-tocopherol were detected in TS. Hexane extraction of both NO and TS resulted in the detection of only α-tocopherol. In conclusion, the use of different extraction methods resulted in different compositions and concentrations of fatty acids and tocopherols in the microalgae studied.
    Matched MeSH terms: Temperature
  2. Razak MR, Yusof NA, Haron MJ, Ibrahim N, Mohammad F, Kamaruzaman S, et al.
    Int J Biol Macromol, 2018 Jun;112:754-760.
    PMID: 29428390 DOI: 10.1016/j.ijbiomac.2018.02.035
    In the present study, iminodiacetic acid (IDA)-modified kenaf fiber, K-IDA formed by the chemical modification of plant kenaf biomass was tested for its efficacy as a sorbent material towards the purification of waste water. The K-IDA fiber was first characterized by the instrumental techniques like Fourier transform infrared (FTIR) analysis, elemental analysis (CHNSO), and scanning electron microscopy (SEM). On testing for the biosorption, we found that the K-IDA has an increment in the adsorption of Cu2+ ions as compared against the untreated fiber. The Cu2+ ions adsorption onto K-IDA fits very well with the Langmuir model and the adsorption maximum achieved to be 91.74mg/g. Further, the adsorption kinetics observed to be pseudo second-order kinetics model and the Cu2+ ions adsorption is a spontaneous endothermic process. The desorption study indicates a highest percentage of Cu2+ of 97.59% from K-IDA under 1M HCl solution against H2SO4 (72.59%) and HNO3 (68.66%). The reusability study indicates that the efficiency did not change much until the 4th cycle and also providing enough evidence for the engagement of our biodegradable K-IDA fiber towards the removal of Cu2+ ions in real-time waste water samples obtained from the electroplating and wood treatment industries.
    Matched MeSH terms: Temperature
  3. Nadesan K, Kumari C, Afiq M
    J Forensic Leg Med, 2017 Aug;50:1-5.
    PMID: 28651196 DOI: 10.1016/j.jflm.2017.05.008
    Heat stroke is a medical emergency which may lead to mortality unless diagnosed early and treated effectively. Heat stroke may manifest rapidly, hence making it difficult to differentiate it from other clinical causes in a collapsed victim.(1) We are presenting a case report of twelve patients who were admitted to our emergency department from a music festival held on 13-15th of March 2014. They developed complications arising from a combination of severe adverse weather condition, prolonged outdoor physical exertion due to long hours of dancing and drug-use, resulting in heat stroke. Three of them died while the remaining patients survived. Their condition was initially misdiagnosed as a classical illicit drug overdose. This was based on the history of drug ingestion by some of the patients who attended the music festival on that day. The information in this case report aims, to create awareness amongst members of the medical team on duty in outdoor events, pre hospital responders and ED physicians when treating and managing similar cases in the future. In addition it is intended to warn the organizers of such events to take adequate precautions to avoid such tragedies in the future.
    Matched MeSH terms: Hot Temperature
  4. Ong CB, Annuar MSM
    Prep Biochem Biotechnol, 2018 Feb 07;48(2):181-187.
    PMID: 29341838 DOI: 10.1080/10826068.2018.1425707
    Immobilization of cross-linked tannase on pristine multiwalled carbon nanotubes (MWCNT) was successfully performed. Cross-linking of tannase molecules was made through glutaraldehyde. The immobilized tannase exhibited significantly improved pH, thermal, and recycling stability. The optimal pH for both free and immobilized tannase was observed at pH 5.0 with optimal operating temperature at 30°C. Moreover, immobilized enzyme retained greater biocatalytic activities upon 10 repeated uses compared to free enzyme in solution. Immobilization of tannase was accomplished by strong hydrophobic interaction most likely between hydrophobic amino acid moieties of the glutaraldehyde-cross-linked tannase to the MWCNT.
    Matched MeSH terms: Temperature
  5. Tiong SH, Saparin N, Teh HF, Ng TLM, Md Zain MZB, Neoh BK, et al.
    J Agric Food Chem, 2018 Jan 31;66(4):999-1007.
    PMID: 29260544 DOI: 10.1021/acs.jafc.7b04995
    During high-temperature refining of vegetable oils, 3-monochloropropanediol (3-MCPD) esters, possible carcinogens, are formed from acylglycerol in the presence of a chlorine source. To investigate organochlorine compounds in vegetable oils as possible precursors for 3-MCPD esters, we tested crude palm, soybean, rapeseed, sunflower, corn, coconut, and olive oils for the presence of organochlorine compounds. Having found them in all vegetable oils tested, we focused subsequent study on oil palm products. Analysis of the chlorine isotope mass pattern exhibited in high-resolution mass spectrometry enabled organochlorine compound identification in crude palm oils as constituents of wax esters, fatty acid, diacylglycerols, and sphingolipids, which are produced endogenously in oil palm mesocarp throughout ripening. Analysis of thermal decomposition and changes during refining suggested that these naturally present organochlorine compounds in palm oils and perhaps in other vegetable oils are precursors of 3-MCPD esters. Enrichment and dose-response showed a linear relationship to 3-MCPD ester formation and indicated that the sphingolipid-based organochlorine compounds are the most active precursors of 3-MCPD esters.
    Matched MeSH terms: Temperature
  6. Kameel NIA, Shuib AS, Tayyab S
    Protein Pept Lett, 2018;25(3):314-324.
    PMID: 29384048 DOI: 10.2174/0929866525666180130155007
    BACKGROUND: Champedak galactose-binding (CGB) lectin is a tetrameric protein with noncovalently bound monomers, isolated from Artocarpus integer fruit seeds. We had previously reported existence of a structured monomer and an unfolded monomer of CGB lectin at pH 2.5 and pH 1.5, respectively. Polyols are known to induce significant refolding in denatured proteins and stabilize proteins against environmental stresses. Studies on the effect of various polyols on the acid-denatured states of CGB lectin are lacking.

    OBJECTIVE: The objective of this study was to investigate the effects of four different polyols, namely, ethylene glycol, erythritol, xylitol and sorbitol on the acid-denatured states of CGB lectin.

    METHODS: CGB lectin was subjected to acid denaturation at pH 2.5 and pH 1.5, both in the absence and presence of 30% (w/v) polyols, i.e. ethylene glycol, erythritol, xylitol and sorbitol. Thermal denaturation of the acid-denatured states was also studied in the absence and presence of these polyols. Different spectroscopic probes such as tryptophan fluorescence, ANS fluorescence and far-UV CD spectral signal were used to monitor structural changes in the acid-denatured states of CGB lectin in the presence of polyols.

    RESULTS: Presence of erythritol, xylitol and sorbitol in the incubation mixture was found to stabilize the lectin at both pH 2.5 and pH 1.5, as evident from the burial of the hydrophobic clusters and decreased polarity around Trp residues. These polyols also stabilized the acid-denatured states of CGB lectin against thermal denaturation by shifting the thermal transition curves towards higher temperatures. Exposure of the acid-denatured states of CGB lectin, obtained at pH 2.5 and pH 1.5 to 61°C and 51°C, respectively, induced formation of non-native β-structures, compared to that present at 25°C, and this phenomenon was significantly suppressed in the presence of these polyols. Based on the spectral data, both sorbitol and erythritol appeared to exude better stabilizing effect. On the other hand, ethylene glycol was shown to destabilize the aciddenatured states of CGB lectin.

    CONCLUSION: Thermal stabilization of the lectin was noticed in the presence of erythritol, xylitol and sorbitol at both pH 2.5 and pH 1.5. These polyols also stabilize the secondary and tertiary structures of the acid-denatured CGB lectin at 25°C. Ethylene glycol was proved to be a destabilizer of the acid-denatured CGB lectin.

    Matched MeSH terms: Temperature
  7. Balaji AB, Ratnam CT, Khalid M, Walvekar R
    J Biomater Appl, 2018 03;32(8):1049-1062.
    PMID: 29298552 DOI: 10.1177/0885328217750476
    The effect of electron beam radiation on ethylene-propylene diene terpolymer/polypropylene blends is studied as an attempt to develop radiation sterilizable polypropylene/ethylene-propylene diene terpolymer blends suitable for medical devices. The polypropylene/ethylene-propylene diene terpolymer blends with mixing ratios of 80/20, 50/50, 20/80 were prepared in an internal mixer at 165°C and a rotor speed of 50 rpm/min followed by compression molding. The blends and the individual components were radiated using 3.0 MeV electron beam accelerator at doses ranging from 0 to 100 kGy in air and room temperature. All the samples were tested for tensile strength, elongation at break, hardness, impact strength, and morphological properties. After exposing to 25 and 100 kGy radiation doses, 50% PP blend was selected for in vivo studies. Results revealed that radiation-induced crosslinking is dominating in EPDM dominant blends, while radiation-induced degradation is prevailing in PP dominant blends. The 20% PP blend was found to be most compatible for 20-60 kGy radiation sterilization. The retention in impact strength with enhanced tensile strength of 20% PP blend at 20-60 kGy believed to be associated with increased compatibility between PP and EPDM along with the radiation-induced crosslinking. The scanning electron micrographs of the fracture surfaces of the PP/EPDM blends showed evidences consistent with the above contentation. The in vivo studies provide an instinct that the radiated blends are safe to be used for healthcare devices.
    Matched MeSH terms: Temperature
  8. Ng KY, Awang N
    Environ Monit Assess, 2018 Jan 06;190(2):63.
    PMID: 29306973 DOI: 10.1007/s10661-017-6419-z
    Frequent haze occurrences in Malaysia have made the management of PM10 (particulate matter with aerodynamic less than 10 μm) pollution a critical task. This requires knowledge on factors associating with PM10 variation and good forecast of PM10 concentrations. Hence, this paper demonstrates the prediction of 1-day-ahead daily average PM10 concentrations based on predictor variables including meteorological parameters and gaseous pollutants. Three different models were built. They were multiple linear regression (MLR) model with lagged predictor variables (MLR1), MLR model with lagged predictor variables and PM10 concentrations (MLR2) and regression with time series error (RTSE) model. The findings revealed that humidity, temperature, wind speed, wind direction, carbon monoxide and ozone were the main factors explaining the PM10 variation in Peninsular Malaysia. Comparison among the three models showed that MLR2 model was on a same level with RTSE model in terms of forecasting accuracy, while MLR1 model was the worst.
    Matched MeSH terms: Temperature
  9. Marrakchi F, Ahmed MJ, Khanday WA, Asif M, Hameed BH
    Int J Biol Macromol, 2017 May;98:233-239.
    PMID: 28147233 DOI: 10.1016/j.ijbiomac.2017.01.119
    In this work, mesoporous-activated carbon (CSAC) was prepared from chitosan flakes (CS) via single-step sodium hydroxide activation for the adsorption of methylene blue (MB). CSAC was prepared using different impregnation ratios of NaOH:CS (1:1, 2:1, 3:1, and 4:1) at 800°C for 90min. The adsorption performance of CSAC was evaluated for MB at different adsorption variables, such MB initial concentrations (25-400mg/L), solution pH (3-11), and temperature (30-50°C). The adsorption isotherm data of CSAC-MB were well fitted to Langmuir model with a maximum adsorption capacity 143.53mg/g at 50°C. Best representation of kinetic data was obtained by the pseudo-second order model. CSAC exhibited excellent adsorption uptake for MB and can potentially be used for other cationic dyes.
    Matched MeSH terms: Temperature
  10. Danish M, Khanday WA, Hashim R, Sulaiman NS, Akhtar MN, Nizami M
    Ecotoxicol Environ Saf, 2017 May;139:280-290.
    PMID: 28167440 DOI: 10.1016/j.ecoenv.2017.02.001
    Box-Behnken model of response surface methodology was used to study the effect of adsorption process parameters for Rhodamine B (RhB) removal from aqueous solution through optimized large surface area date stone activated carbon. The set experiments with three input parameters such as time (10-600min), adsorbent dosage (0.5-10g/L) and temperature (25-50°C) were considered for statistical significance. The adequate relation was found between the input variables and response (removal percentage of RhB) and Fisher values (F- values) along with P-values suggesting the significance of various term coefficients. At an optimum adsorbent dose of 0.53g/L, time 593min and temperature 46.20°C, the adsorption capacity of 210mg/g was attained with maximum desirability. The negative values of Gibb(')s free energy (ΔG) predicted spontaneity and feasibility of adsorption; whereas, positive Enthalpy change (ΔH) confirmed endothermic adsorption of RhB onto optimized large surface area date stone activated carbons (OLSADS-AC). The adsorption data were found to be the best fit on the Langmuir model supporting monolayer type of adsorption of RhB with maximum monolayer layer adsorption capacity of 196.08mg/g.
    Matched MeSH terms: Temperature
  11. Zzaman W, Bhat R, Yang TA, Easa AM
    J Sci Food Agric, 2017 Oct;97(13):4429-4437.
    PMID: 28251656 DOI: 10.1002/jsfa.8302
    BACKGROUND: Roasting is one of the important unit operations in the cocoa-based industries in order to develop unique flavour in products. Cocoa beans were subjected to roasting at different temperatures and times using superheated steam. The influence of roasting temperature (150-250°C) and time (10-50 min) on sugars, free amino acids and volatile flavouring compounds were investigated.

    RESULTS: The concentration of total reducing sugars was reduced by up to 64.61, 77.22 and 82.52% with increased roasting temperature at 150, 200 and 250°C for 50 min, respectively. The hydrophobic amino acids were reduced up to 29.21, 36.41 and 48.87% with increased roasting temperature at 150, 200 and 250°C for 50 min, respectively. A number of pyrazines, esters, aldehydes, alcohols, ketones, carboxyl acids and hydrocarbons were detected in all the samples at different concentration range. Formation of the most flavour active compounds, pyrazines, were the highest concentration (2.96 mg kg-1 ) at 200°C for 10 min.

    CONCLUSION: The superheated steam roasting method achieves the optimum roasting condition within a short duration Therefore, the quality of cocoa beans can be improved using superheated steam during the roasting process. © 2017 Society of Chemical Industry.

    Matched MeSH terms: Temperature
  12. Singh R, Sirisinghe RG
    Singapore Med J, 1999 Feb;40(2):84-7.
    PMID: 10414164
    To investigate the acute effects of an 18 km run on the haematological and plasma electrolyte parameters, in recreational runners under conditions of high temperatures and humidity.
    Matched MeSH terms: Body Temperature
  13. Lee CY, Ng LC, Koh TH
    Singapore Med J, 2008 Nov;49(11):959-60.
    PMID: 19037568
    Matched MeSH terms: Body Temperature
  14. Zhu F, Storey S, Ashaari MM, Clipson N, Doyle E
    Environ Sci Pollut Res Int, 2017 Feb;24(6):5404-5414.
    PMID: 28025788 DOI: 10.1007/s11356-016-8251-3
    Benzo(a)pyrene degradation was compared in soil that was either composted, incubated at a constant temperature of 22 °C, or incubated under a temperature regime typical of a composting process. After 84 days, significantly more (61%) benzo(a)pyrene was removed from composted soil compared to soils incubated at a constant temperature (29%) or at composting temperatures (46%). Molecular fingerprinting approaches indicated that in composted soils, bacterial community changes were driven by both temperature and organic amendment, while fungal community changes were primarily driven by temperature. Next-generation sequencing data revealed that the bacterial community in composted soil was dominated by Actinobacteria (order Actinomycetales), Firmicutes (class Bacilli), and Proteobacteria (classes Gammaproteobacteria and Alphaproteobacteria), regardless of whether benzo(a)pyrene was present or not. The relative abundance of unclassified Actinomycetales (Actinobacteria) was significantly higher in composted soil when degradation was occurring, indicating a potential role for these organisms in benzo(a)pyrene metabolism. This study provides baseline data for employing straw-based composting strategies for the removal of high molecular weight PAHs from soil and contributes to the knowledge of how microbial communities respond to incubation conditions and pollutant degradation.
    Matched MeSH terms: Temperature
  15. Lau YY, Wong YS, Ang TZ, Ong SA, Lutpi NA, Ho LN
    Environ Sci Pollut Res Int, 2018 Mar;25(7):7067-7075.
    PMID: 29275478 DOI: 10.1007/s11356-017-1069-9
    The theme of present research demonstrates performance of copper (II) sulfate (CuSO4) as catalyst in thermolysis process to treat reactive black 5 (RB 5) dye. During thermolysis without presence of catalyst, heat was converted to thermal energy to break the enthalpy of chemical structure bonding and only 31.62% of color removal. With CuSO4 support as auxiliary agent, the thermally cleaved molecular structure was further destabilized and reacted with CuSO4. Copper ions functioned to delocalize the coordination of π of the lone paired electron in azo bond, C=C bond of the sp2 carbon to form C-C of the sp3 amorphous carbon in benzene and naphthalene. Further, the radicals of unpaired electrons were stabilized and RB 5 was thermally decomposed to methyl group. Zeta potential measurement was carried out to analyze the mechanism of RB 5 degradation and measurement at 0 mV verified the critical chemical concentration (CCC) (0.7 g/L copper (II) sulfate), as the maximum 92.30% color removal. The presence of copper (II) sulfate catalyst has remarkably increase the RB 5 dye degradation as the degradation rate constant without catalyst, k1 is 6.5224 whereas the degradation rate constant with catalyst, k2 is 25.6810. This revealed the correlation of conversion of thermal energy from heat to break the chemical bond strength, subsequent fragmentation of RB 5 dye molecular mediated by copper (II) sulfate catalyst. The novel framework on thermolysis degradation of molecular structure of RB 5 with respect to the bond enthalpy and interfacial intermediates decomposition with catalyst reaction were determined.
    Matched MeSH terms: Hot Temperature
  16. Tehubijuluw H, Subagyo R, Yulita MF, Nugraha RE, Kusumawati Y, Bahruji H, et al.
    PMID: 33712959 DOI: 10.1007/s11356-021-13285-y
    Red mud as industrial waste from bauxite was utilized as a precursor for the synthesis of mesoporous ZSM-5. A high concentration of iron oxide in red mud was successfully removed using alkali fusion treatment. Mesoporous ZSM-5 was synthesized using cetyltrimethylammonium bromide (CTABr) as a template via dual-hydrothermal method, and the effect of crystallization time was investigated towards the formation of mesopores. Characterization using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), N2 adsorption-desorption, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) indicated the formation of cubic crystallite ZSM-5 with high surface area and mesopore volume within 6 h of crystallization. Increasing the crystallization time revealed the evolution of highly crystalline ZSM-5; however, the surface area and mesoporosity were significantly reduced. The effect of mesoporosity was investigated on the adsorption of methylene blue (MB). Kinetic and thermodynamic analysis of MB adsorption on mesoporous ZSM-5 was carried out at a variation of adsorption parameters such as the concentration of MB solution, the temperatures of solution, and the amount of adsorbent. Finally, methanol, 1-butanol, acetone, hydrochloric acid (HCl), and acetonitrile were used as desorbing agents to investigate the reusability and stability of mesoporous ZSM-5 as an adsorbent for MB removal.
    Matched MeSH terms: Temperature
  17. Khoo SL, Amirul AA, Kamaruzaman M, Nazalan N, Azizan MN
    Folia Microbiol (Praha), 1994;39(5):392-8.
    PMID: 7729774
    Aspergillus flavus produced approximately 50 U/mL of amylolytic activity when grown in liquid medium with raw low-grade tapioca starch as substrate. Electrophoretic analysis of the culture filtrate showed the presence of only one amylolytic enzyme, identified as an alpha-amylase as evidenced by (i) rapid loss of color in iodine-stained starch and (ii) production of a mixture of glucose, maltose, maltotriose and maltotetraose as starch digestion products. The enzyme was purified by ammonium sulfate precipitation and ion-exchange chromatography and was found to be homogeneous on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified enzyme had a molar mass of 52.5 +/- 2.5 kDa with an isoelectric point at pH 3.5. The enzyme was found to have maximum activity at pH 6.0 and was stable in a pH range from 5.0 to 8.5. The optimum temperature for the enzyme was 55 degrees C and it was stable for 1 h up to 50 degrees C. The Km and V for gelatinized tapioca starch were 0.5 g/L and 108.67 mumol reducing sugars per mg protein per min, respectively.
    Matched MeSH terms: Temperature
  18. Shamekhi F, Shuhaimi M, Ariff A, Manap YA
    Folia Microbiol (Praha), 2013 Mar;58(2):91-101.
    PMID: 22843029 DOI: 10.1007/s12223-012-0183-9
    The purpose of this study was to improve the survival of Bifidobacterium animalis subsp. lactis 10140 during freeze-drying process by microencapsulation, using a special pediatric prebiotics mixture (galactooligosaccharides and fructooligosaccharides). Probiotic microorganisms were encapsulated with a coat combination of prebiotics-calcium-alginate prior to freeze-drying. Both encapsulated and free cells were then freeze-dried in their optimized combinations of skim milk and prebiotics. Response surface methodology (RSM) was used to produce a coating combination as well as drying medium with the highest cell viability during freeze-drying. The optimum encapsulation composition was found to be 2.1 % Na-alginate, 2.9 % prebiotic, and 21.7 % glycerol. Maximum survival predicted by the model was 81.2 %. No significant (p > 0.05) difference between the predicted and experimental values verified the adequacy of final reduced models. The protection ability of encapsulation was then examined over 120 days of storage at 4 and 25 °C and exposure to a sequential model of infantile GIT conditions including both gastric conditions (pH 3.0 and 4.0, 90 min, 37 °C) and intestinal conditions (pH 7.5, 5 h, 37 °C). Significantly improved cell viability showed that microencapsulation of B. lactis 10140 with the prebiotics was successful in producing a stable symbiotic powdery nutraceutical.
    Matched MeSH terms: Temperature
  19. Abdul Rahman MZ, Salleh AB, Abdul Rahman RN, Abdul Rahman MB, Basri M, Leow TC
    Protein Sci, 2012 Aug;21(8):1210-21.
    PMID: 22692819 DOI: 10.1002/pro.2108
    The activation of lipases has been postulated to proceed by interfacial activation, temperature switch activation, or aqueous activation. Recently, based on molecular dynamics (MD) simulation experiments, the T1 lipase activation mechanism was proposed to involve aqueous activation in addition to a double-flap mechanism. Because the open conformation structure is still unavailable, it is difficult to validate the proposed theory unambiguously to understand the behavior of the enzyme. In this study, we try to validate the previous reports and uncover the mystery behind the activation process using structural analysis and MD simulations. To investigate the effects of temperature and environmental conditions on the activation process, MD simulations in different solvent environments (water and water-octane interface) and temperatures (20, 50, 70, 80, and 100°C) were performed. Based on the structural analysis of the lipases in the same family of T1 lipase (I.5 lipase family), we proposed that the lid domain comprises α6 and α7 helices connected by a loop, thus forming a helix-loop-helix motif involved in interfacial activation. Throughout the MD simulations experiments, lid displacements were only observed in the water-octane interface, not in the aqueous environment with respect to the temperature effect, suggesting that the activation process is governed by interfacial activation coupled with temperature switch activation. Examining the activation process in detail revealed that the large structural rearrangement of the lid domain was caused by the interaction between the hydrophobic residues of the lid with octane, a nonpolar solvent, and this conformation was found to be thermodynamically favorable.
    Matched MeSH terms: Temperature
  20. Mat Yajit NL, Fazlin Hashim NH, Illias RM, Abdul Murad AM
    Protein Expr Purif, 2024 Jul;219:106486.
    PMID: 38642864 DOI: 10.1016/j.pep.2024.106486
    New thermostable β-1,3-1,4-glucanase (lichenase) designated as Blg29 was expressed and purified from a locally isolated alkaliphilic bacteria Bacillus lehensis G1. The genome sequence of B. lehensis predicted an open reading frame of Blg29 with a deduced of 249 amino acids and a molecular weight of 28.99 kDa. The gene encoding for Blg29 was successfully amplified via PCR and subsequently expressed as a recombinant protein using the E. coli expression system. Recombinant Blg29 was produced as a soluble form and further purified via immobilized metal ion affinity chromatography (IMAC). Based on biochemical characterization, recombinant Blg29 showed optimal activity at pH9 and temperature 60 °C respectively. This enzyme was stable for more than 2 h, incubated at 50 °C, and could withstand ∼50 % of its activity at 70 °C for an hour and a half. No significant effect on Blg29 was observed when incubated with metal ions except for a small increase with ion Ca2+. Blg29 showed high substrate activity towards lichenan where Vm, Km, Kcat, and kcat/Km values were 2040.82 μmolmin‾1mg‾1, 4.69 mg/mL, and 986.39 s‾1 and 210.32 mLs‾1mg‾1 respectively. The high thermostability and activity make this enzyme useable for a broad prospect in industry applications.
    Matched MeSH terms: Temperature
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links