MyMedR

Displaying publications 21 - 31 of 31 in total

Abstract:

Sort:

Fulltext Rheological characterization and fouling deposition behavior of coconut cream emulsion at heat processing temperature range

Maghazechi A, Mohammadi Nafchi A, Tan TC, Easa AM

Food Sci Nutr, 2022 Nov;10(11):3801-3813.
PMID: 36348806 DOI: 10.1002/fsn3.2977

Fouling deposition in the coconut cream emulsion (CCE) is considered a severe technical issue in the industry. Since the fouling deposition results from the heating effect on the CCE bulk, the heat-induced structural changes in the CCE bulk at different temperatures were rheologically investigated in the first part of this study. The second part applied different heat treatment conditions to investigate generated fouling deposition (GFD). Chemical composition, FTIR, and SEM imaging were used to explore GFDs thoroughly. The increase in viscosity and storage modulus (G') reflect such heat-induced changes over the experimental conditions. More structural changes were predicted at around ≥85°C, accompanied by a sharp increase in viscosity and (G'), which was associated with the gelation of CCE. The conformational transition, fat agglomeration in CCE bulk, generated fouling deposits (GFDs) were significant around 70°C. The chemical composition of the GFD has shown an increasing trend in the protein, carbohydrates, and ash, meanwhile fluctuation in the fat contents with increasing temperature. The FTIR peaks showed novel peaks around temperature ≥85°C, which implied new amide groups or new protein conformation. The SEM images provided the different microstructures of GFDs at high-temperature levels. More likely the GFDs appeared at temperature ≥85°C are a gel deposit layer. These findings strongly suggest that emulsion gelation was the primary cause of coconut cream fouling.
Influences of superheated steam roasting on changes in sugar, amino acid and flavour active components of cocoa bean (Theobroma cacao)

Zzaman W, Bhat R, Yang TA, Easa AM

J Sci Food Agric, 2017 Oct;97(13):4429-4437.
PMID: 28251656 DOI: 10.1002/jsfa.8302

BACKGROUND: Roasting is one of the important unit operations in the cocoa-based industries in order to develop unique flavour in products. Cocoa beans were subjected to roasting at different temperatures and times using superheated steam. The influence of roasting temperature (150-250°C) and time (10-50 min) on sugars, free amino acids and volatile flavouring compounds were investigated.
RESULTS: The concentration of total reducing sugars was reduced by up to 64.61, 77.22 and 82.52% with increased roasting temperature at 150, 200 and 250°C for 50 min, respectively. The hydrophobic amino acids were reduced up to 29.21, 36.41 and 48.87% with increased roasting temperature at 150, 200 and 250°C for 50 min, respectively. A number of pyrazines, esters, aldehydes, alcohols, ketones, carboxyl acids and hydrocarbons were detected in all the samples at different concentration range. Formation of the most flavour active compounds, pyrazines, were the highest concentration (2.96 mg kg-1 ) at 200°C for 10 min.
CONCLUSION: The superheated steam roasting method achieves the optimum roasting condition within a short duration Therefore, the quality of cocoa beans can be improved using superheated steam during the roasting process. © 2017 Society of Chemical Industry.
Improvement of cooking and textural properties of rice flour-soy protein isolate noodles stabilised with microbial transglutaminase and glucono-δ-lactone and dried using superheated steam

Ojukwu M, Tan HL, Murad M, Nafchi AM, Easa AM

Food Sci Technol Int, 2023 Dec;29(8):799-808.
PMID: 36000280 DOI: 10.1177/10820132221121169

In a bid to produce rice flour noodles with improved texture and reduced cooking time, rice flour-soy protein isolate noodles (RNS) were structurally enhanced by a combined treatment (COM) of microbial transglutaminase (MTG) with glucono-δ-lactone (GDL). The RNS-COM was either dried using superheated steam (SHS) to yield RNS-COM-SHS or steamed for 10 min (S10) before air drying to produce RNS-COM-S10 noodles. Control samples were SHS-dried rice flour (RN-SHS) and air-dried RN-S10 noodles. In general, textural and microstructural properties indicated higher textural properties and a more robust network in RNS-COM-SHS and RNS-COM-S10 than in other noodles. However, optimum cooking time (P < 0.5) was in the order; RN-SHS, RNS-COM-SHS < RN-S10 < RNS-COM-S10. As a result of the COM treatment, structurally enhanced noodles were more resistant to cooking. As applied in RNS-COM-SHS noodles, SHS was able to improve cooking quality, probably through the formation of bigger and evenly spread pores that had promoted faster gelatinisation of starch, with a high order of relative starch crystallinity.
Composition, physicochemical properties and thermal inactivation kinetics of polyphenol oxidase and peroxidase from coconut (Cocos nucifera) water obtained from immature, mature and overly-mature coconut

Tan TC, Cheng LH, Bhat R, Rusul G, Easa AM

Food Chem, 2014 Jan 1;142:121-8.
PMID: 24001821 DOI: 10.1016/j.foodchem.2013.07.040

Composition, physicochemical properties and enzyme inactivation kinetics of coconut water were compared between immature (IMC), mature (MC) and overly-mature coconuts (OMC). Among the samples studied, pH, turbidity and mineral contents for OMC water was the highest, whereas water volume, titratable acidity, total soluble solids and total phenolics content for OMC water were the lowest. Maturity was found to affect sugar contents. Sucrose content was found to increase with maturity, and the reverse trend was observed for fructose and glucose. Enzyme activity assessment showed that polyphenol oxidase (PPO) in all samples was more heat resistant than peroxidase (POD). Compared to IMC and MC, PPO and POD from OMC water showed the lowest thermal resistance, with D83.3°C=243.9s (z=27.9°C), and D83.3°C=129.9s (z=19.5°C), respectively.
Fulltext Influence of honey types and heating treatment on the rheological properties of glutinous rice flour gels

Seow EK, Gan CY, Tan TC, Lee LK, Easa AM

J Food Sci Technol, 2019 Apr;56(4):2105-2114.
PMID: 30996444 DOI: 10.1007/s13197-019-03691-z

Present study compared the rheological properties of glutinous rice flour (GRF) gel (33.3%, w/v) added with raw bee honey (RBH) or stingless bee honey (SBH) with/without heating treatment. RBH (diatase activity: 12.14 Schade) and SBH (1.53 Schade) significantly reduced the network of GRF gel by lowering the gel viscosity, with RBH having the highest rate of viscosity decrease (- 2.74 × 10-5 Pa). As the addition of heated-SBH or heated-RBH did not reduce gel viscosity, it was hypothesised that active diastase played a major role to weaken gel network. This was further supported by the significant and the lowest storage modulus (G') value of RBH-GRF gel (5.99 ± 0.02 Pa), as compared to SBH-GRF (6.27 ± 0.04 Pa) and control (6.33 ± 0.04 Pa). A detail of rheological behaviour of the gels was further explained using power law. Overall, this GRF gel model has successfully demonstrated the potential of honey diastase in weakening network of starch-based food.
Molecular forces governing protein-protein interaction: Structure-function relationship of complexes protein in the food industry

Alrosan M, Tan TC, Easa AM, Gammoh S, Alu'datt MH

Crit Rev Food Sci Nutr, 2021 Jan 18.
PMID: 33455424 DOI: 10.1080/10408398.2021.1871589

The application of protein-protein interaction (PPI) has been widely used in various industries, such as food, nutraceutical, and pharmaceutical. A deeper understanding of PPI is needed, and the molecular forces governing proteins and their interaction must be explained. The design of new structures with improved functional properties, e.g., solubility, emulsion, and gelation, has been fueled by the development of structural and colloidal building blocks. In this review, the molecular forces of protein structures are discussed, followed by the relationship between molecular force and structure, ways of a bind of proteins together in solution or at the interface, and functional properties. A more detailed look is thus taken at the relationship between the various influencing factors on molecular forces involved in PPI. These factors include protein properties, such as types, concentration, and mixing ratio, and solvent conditions, such as ionic strength and pH. This review also summarizes methods tha1t are capable of identifying molecular forces in protein and PPI, as well as characterizing protein structure.
Fulltext Effect of superheated-steam roasting on physicochemical properties of peanut (Arachis hypogea) oil

Idrus NFM, Zzaman W, Yang TA, Easa AM, Sharifudin MS, Noorakmar BW, et al.

Food Sci Biotechnol, 2017;26(4):911-920.
PMID: 30263619 DOI: 10.1007/s10068-017-0132-0

Peanut (Arachis hypogaea) is an important source of protein and lipid globally. The effect of superheated-steam roasting on quality of peanut oil was evaluated based on physicochemical quality parameters. Three roasting temperatures (150, 200, and 250 °C) were used for different periods of roasting time and the obtained results were compared with those of conventional roasting. At 250 °C, superheated-steam roasted peanuts yielded more oil (26.84%) than conventionally roasted peanuts (24.85%). Compared with conventional roasting, superheated-steam roasting resulted in lower oil color, peroxide, p-anisidine, free fatty acid, conjugated diene and triene, and acid values and higher viscosity and iodine values in the roasted peanut oil. These values were significantly different from each other (p
Mechanism of the structural interaction between whey and lentil proteins in the unique creation of a protein structure

Alrosan M, Tan TC, Easa AM, Gammoh S, Alu'datt MH

J Food Sci, 2021 Dec;86(12):5282-5294.
PMID: 34796499 DOI: 10.1111/1750-3841.15974

Poor solubility is a substantial factor that restricts the production of high value-added lentil proteins (LPs). In this study, whey protein isolates (WPIs), which have high solubility and are used in various food industries, were mixed with LPs at pH 12 to create LP-WPI protein complexes with improved water solubility properties using pH-recycling approach (maintained at pH 12.0 for 60 min and then readjusting to pH 7.0). LP-WPI protein complexes produced in this study have gained high surface charge, increased in the solubilization of protein complexes to ≈92%, as well as improved resistance against protein aggregation. The ratio of LPs to WPIs has a significant effect on the generation of unique tertiary and secondary protein structures based on the protein-protein interaction (PPI) technique via pH-recycling. The protein interaction between LPs and WPIs resulted in alteration on the surface morphology of the produced protein complexes. This study showed that electrostatic interaction, hydrophobic force, and hydrogen bond appear as major molecular forces in this PPI. The efficacy of the pH-recycling method used in this research indicates that this approach could be a robust approach to enhance the functional properties of food proteins. PRACTICAL APPLICATION: The pH-recycling technique is a proven technique for protein complexation in creating novel protein complexes with improved functional properties. Even though lentils are a rich source of plant-based protein, its utilization by food industries is restricted due to the poor water solubility of lentil proteins (LPs). However, by using complexing lentil proteins with whey protein isolates (WPIs), that is, LP-WPI protein complex, was developed. The water solubility of LP-WPI protein complex was significantly higher than LPs, up to approximately 92%. In addition, this could improve the utilization of lentil seeds in food application as an alternative for animal-based proteins.
Overview of fermentation process: structure-function relationship on protein quality and non-nutritive compounds of plant-based proteins and carbohydrates

Alrosan M, Tan TC, Koh WY, Easa AM, Gammoh S, Alu'datt MH

Crit Rev Food Sci Nutr, 2023;63(25):7677-7691.
PMID: 35266840 DOI: 10.1080/10408398.2022.2049200

Demands for high nutritional value-added food products and plant-based proteins have increased over the last decade, in line with the growth of the human population and consumer health awareness. The quality of the plant-based proteins depends on their digestibility, amino acid content, and residues of non-nutritive compounds, such as phenolic compounds, anti-nutritional compounds, antioxidants, and saponins. The presence of these non-nutritive compounds could have detrimental effects on the quality of the proteins. One of the solutions to address these shortcomings of plant-based proteins is fermentation, whereby enzymes that present naturally in microorganisms used during fermentation are responsible for the cleavage of the bonds between proteins and non-nutritive compounds. This mechanism has pronounced effects on the non-nutritive compounds, resulting in the enhancement of protein digestibility and functional properties of plant-based proteins. We assert that the types of plant-based proteins and microorganisms used during fermentation must be carefully addressed to truly enhance the quality, functional properties, and health functionalities of plant-based proteins.Supplemental data for this article is available online at here. show.
Fulltext Influence of Fresh Palm Fruit Sterilization in the Production of Carotenoid-Rich Virgin Palm Oil

Hassan NSM, Hossain MS, Balakrishnan V, Zuknik MH, Mustaner M, Easa AM, et al.

Foods, 2021 Nov 17;10(11).
PMID: 34829117 DOI: 10.3390/foods10112838

Palm oil is known to be rich in carotenoids and other phytonutrients. However, the carotenoids and phytonutrients degrade due to high heat sterilization of oil palm fruits. The present study was conducted to produce carotenoid-rich virgin palm oil (VPO) using cold-press extraction. Herein, the influence of sterilization of oil palm fresh fruits in the production of cold-pressed VPO was determined with varying sterilization temperatures, times, and amounts of palm fruits in sterilization. The experimental sterilization conditions were optimized using response surface methodology (RSM) based on the maximum VPO yield and minimum FFAs in cold-pressed VPO. The optimal sterilization experimental conditions of oil palm fruits were determined to be a sterilization temperature of 62 °C, a time of 90 min, and an amount of oil palm fruits of 8 kg. Under these experimental conditions, the maximum cold-pressed VPO yield and the minimal content of free fatty acids (FFAs) obtained were 27.94 wt.% and 1.32 wt.%, respectively. Several analytic methods were employed to determine cold-pressed VPO quality and fatty acids compositions and compared with the crude palm oil. It was found that cold-pressed VPO contains higher carotenoids (708 mg/g) and unsaturated fatty acids compared with the carotenoid (343 mg/g) and fatty acid compositions in CPO. The findings of the present study reveal that the sterilization temperature potentially influences the carotenoid and nutrient contents in VPO; therefore, the optimization of the sterilization conditions is crucial to producing carotenoid- and phytonutrient-rich VPO.
Evaluation of quality and protein structure of natural water kefir-fermented quinoa protein concentrates

Alrosan M, Tan TC, Easa AM, Gammoh S, Alu'datt MH, Aleid GM, et al.

Food Chem, 2023 Mar 15;404(Pt B):134614.
PMID: 36444092 DOI: 10.1016/j.foodchem.2022.134614

The utilisation of quinoa protein concentrates (QPCs) is limited due to their poor protein digestibility (78.54 %). In this study, QPCs (1 % w/v) were fermented in 5 % (v/v) water kefir grains (WKG) for 5 days at 25 °C. The protein quality of the fermented QPCs was enhanced, whereby the protein digestibility increased significantly (P