MyMedR

Displaying publications 21 - 40 of 70 in total

Abstract:

Sort:

Fulltext A Review on the Development of Gold and Silver Nanoparticles-Based Biosensor as a Detection Strategy of Emerging and Pathogenic RNA Virus

Ibrahim N, Jamaluddin ND, Tan LL, Mohd Yusof NY

Sensors (Basel), 2021 Jul 28;21(15).
PMID: 34372350 DOI: 10.3390/s21155114

The emergence of highly pathogenic and deadly human coronaviruses, namely SARS-CoV and MERS-CoV within the past two decades and currently SARS-CoV-2, have resulted in millions of human death across the world. In addition, other human viral diseases, such as mosquito borne-viral diseases and blood-borne viruses, also contribute to a higher risk of death in severe cases. To date, there is no specific drug or medicine available to cure these human viral diseases. Therefore, the early and rapid detection without compromising the test accuracy is required in order to provide a suitable treatment for the containment of the diseases. Recently, nanomaterials-based biosensors have attracted enormous interest due to their biological activities and unique sensing properties, which enable the detection of analytes such as nucleic acid (DNA or RNA), aptamers, and proteins in clinical samples. In addition, the advances of nanotechnologies also enable the development of miniaturized detection systems for point-of-care (POC) biosensors, which could be a new strategy for detecting human viral diseases. The detection of virus-specific genes by using single-stranded DNA (ssDNA) probes has become a particular interest due to their higher sensitivity and specificity compared to immunological methods based on antibody or antigen for early diagnosis of viral infection. Hence, this review has been developed to provide an overview of the current development of nanoparticles-based biosensors that target pathogenic RNA viruses, toward a robust and effective detection strategy of the existing or newly emerging human viral diseases such as SARS-CoV-2. This review emphasizes the nanoparticles-based biosensors developed using noble metals such as gold (Au) and silver (Ag) by virtue of their powerful characteristics as a signal amplifier or enhancer in the detection of nucleic acid. In addition, this review provides a broad knowledge with respect to several analytical methods involved in the development of nanoparticles-based biosensors for the detection of viral nucleic acid using both optical and electrochemical techniques.
A compendium of all-in-one solar-driven water splitting using ZnIn2S4-based photocatalysts: guiding the path from the past to the limitless future

Chong WK, Ng BJ, Tan LL, Chai SP

Chem Soc Rev, 2024 Sep 02.
PMID: 39222069 DOI: 10.1039/d3cs01040f

Photocatalytic water splitting represents a leading approach to harness the abundant solar energy, producing hydrogen as a clean and sustainable energy carrier. Zinc indium sulfide (ZIS) emerges as one of the most captivating candidates attributed to its unique physicochemical and photophysical properties, attracting much interest and holding significant promise in this domain. To develop a highly efficient ZIS-based photocatalytic system for green energy production, it is paramount to comprehensively understand the strengths and limitations of ZIS, particularly within the framework of solar-driven water splitting. This review elucidates the three sequential steps that govern the overall efficiency of ZIS with a sharp focus on the mechanisms and inherent drawbacks associated with each phase, including commonly overlooked aspects such as the jeopardising photocorrosion issue, the neglected oxidative counter surface reaction kinetics in overall water splitting, the sluggish photocarrier dynamics and the undesired side redox reactions. Multifarious material design strategies are discussed to specifically mitigate the formidable limitations and bottleneck issues. This review concludes with the current state of ZIS-based photocatalytic water splitting systems, followed by personal perspectives aimed at elevating the field to practical consideration for future endeavours towards sustainable hydrogen production through solar-driven water splitting.
Fulltext Electrochemically reduced graphene oxide integrated with carboxylated-8-carboxamidoquinoline: A platform for highly sensitive voltammetric detection of Zn(II) ion by screen-printed carbon electrode

Tan LL, Mohamad NS, Hassan NI, Goh CT

PLoS One, 2025;20(2):e0315974.
PMID: 39919092 DOI: 10.1371/journal.pone.0315974

Zinc has been demonstrated to boost immune response during SAR-CoV-2 infection, where it prevents coronavirus multiplication. Clinical investigations have testified to its beneficial effects on respiratory health and its deficiency may reduce immune function. A highly sensitive detection of Zn(II) ion via differential pulse voltammetry (DPV) utilizing an environmentally friendly modified screen-printed carbon electrode (SPCE) of electrochemically reduced graphene oxide (ErGO) embedded with carboxylated-8-carboxamidoquinoline (CACQ) as Zn(II) chelating ligand. The green CACQ/ErGO-modified SPCE was characterized by spectroscopy techniques, such as Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, and field-emission scanning electron microscopy with energy dispersive X-ray (FESEM-EDX). The modified electrode-solution interface was studied by electrochemical cyclic voltammetry (CV) and DPV methods. The CACQ-modified wrinkled ErGO electrode conferred a large surface-to-volume ratio with multiple binding sites resulting in greater opportunity for multiple dative covalent binding events with Zn(II) via coordination chemistry, and considerably accelerated the electron transfer rate at the electrode surface. The green Zn(II) sensor demonstrated a quick response time (60 s), broad linear range [1 pM-1 μM Zn(II) ion], a limit of detection (LOD) of 0.53 pM, 35 days of storage period (≥80% of its initial response retained), good reproducibility [relative standard deviation (RSD) = 3.4%], and repeatability (RSD = 4.4%). The developed electrode was applied to determine Zn(II) ion concentration in dietary supplement samples, and the results were in good agreement with those obtained from inductively coupled plasma-mass spectrometry (ICP-MS).
Fulltext Leprosy--an imported disease

Kwan Z, Pailoor J, Tan LL, Robinson S, Wong SM, Ismail R

Lepr Rev, 2014 Sep;85(3):170-6.
PMID: 25509717

OBJECTIVES: Leprosy remains a public health concern in Malaysia and globally. We aim to review the characteristics of leprosy patients in a tertiary institution in urban Malaysia.
DESIGN: This is a case series of 27 leprosy patients who presented between 2008 and 2013.
RESULTS: The majority of our patients consisted of male (74.1%), Malaysian (63.0%), blue collar workers (51.9%) and married (59.3%) patients; 48.1% had lepromatous leprosy. All except one of the patients presented with skin lesions, 25.9% had nerve involvement and 33.3% developed lepra reactions. Forty-four point four percent (44.4%) of the cases seen initially in the primary care setup were misdiagnosed.
CONCLUSIONS: Doctors need to have a high index of suspicion for leprosy when patients present with suggestive skin, nerve or musculoskeletal lesions. Immigrants accounted for 37% of cases and these patients may become a reservoir of infection, thus accounting for the rise in incidence. An increasing trend in multibacillary cases may be attributed to the spread from migrants from countries with a high burden of leprosy.
Sodium valproate-aggravated psoriasiform eruption

Kwan Z, Che Ismail RB, Wong SM, Tan LL, Robinson S, Lim KS

Int J Dermatol, 2014 Oct;53(10):e477-9.
PMID: 25209632 DOI: 10.1111/ijd.12579
Highly reactive {001} facets of TiO2-based composites: synthesis, formation mechanism and characterization

Ong WJ, Tan LL, Chai SP, Yong ST, Mohamed AR

Nanoscale, 2014 Feb 21;6(4):1946-2008.
PMID: 24384624 DOI: 10.1039/c3nr04655a

Titanium dioxide (TiO2) is one of the most widely investigated metal oxides due to its extraordinary surface, electronic and catalytic properties. However, the large band gap of TiO2 and massive recombination of photogenerated electron-hole pairs limit its photocatalytic and photovoltaic efficiency. Therefore, increasing research attention is now being directed towards engineering the surface structure of TiO2 at the most fundamental and atomic level namely morphological control of {001} facets in the range of microscale and nanoscale to fine-tune its physicochemical properties, which could ultimately lead to the optimization of its selectivity and reactivity. The synthesis of {001}-faceted TiO2 is currently one of the most active interdisciplinary research areas and demonstrations of catalytic enhancement are abundant. Modifications such as metal and non-metal doping have also been extensively studied to extend its band gap to the visible light region. This steady progress has demonstrated that TiO2-based composites with {001} facets are playing and will continue to play an indispensable role in the environmental remediation and in the search for clean and renewable energy technologies. This review encompasses the state-of-the-art research activities and latest advancements in the design of highly reactive {001} facet-dominated TiO2via various strategies, including hydrothermal/solvothermal, high temperature gas phase reactions and non-hydrolytic alcoholysis methods. The stabilization of {001} facets using fluorine-containing species and fluorine-free capping agents is also critically discussed in this review. To overcome the large band gap of TiO2 and rapid recombination of photogenerated charge carriers, modifications are carried out to manipulate its electronic band structure, including transition metal doping, noble metal doping, non-metal doping and incorporating graphene as a two-dimensional (2D) catalyst support. The advancements made in these aspects are thoroughly examined, with additional insights related to the charge transfer events for each strategy of the modified-TiO2 composites. Finally, we offer a summary and some invigorating perspectives on the major challenges and new research directions for future exploitation in this emerging frontier, which we hope will advance us to rationally harness the outstanding structural and electronic properties of {001} facets for various environmental and energy-related applications.
Facet-dependent photocatalytic properties of TiO(2) -based composites for energy conversion and environmental remediation

Ong WJ, Tan LL, Chai SP, Yong ST, Mohamed AR

ChemSusChem, 2014 Mar;7(3):690-719.
PMID: 24532412 DOI: 10.1002/cssc.201300924

Titanium dioxide (TiO2 ) is one of the most widely investigated metal oxides because of its extraordinary surface, electronic, and photocatalytic properties. However, the large band gap of TiO2 and the considerable recombination of photogenerated electron-hole pairs limit its photocatalytic efficiency. Therefore, research attention is being increasingly directed towards engineering the surface structure of TiO2 on the atomic level (namely morphological control of {001} facets on the micro- and nanoscale) to fine-tune its physicochemical properties; this could ultimately lead to the optimization of selectivity and reactivity. This Review encompasses the fundamental principles to enhance the photocatalytic activity by using highly reactive {001}-faceted TiO2 -based composites. The current progress of such composites, with particular emphasis on the photodegradation of pollutants and photocatalytic water splitting for hydrogen generation, is also discussed. The progresses made are thoroughly examined for achieving remarkable photocatalytic performances, with additional insights with regard to charge transfer. Finally, a summary and some perspectives on the challenges and new research directions for future exploitation in this emerging frontier are provided, which hopefully would allow for harnessing the outstanding structural and electronic properties of {001} facets for various energy- and environmental-related applications.
Acrylic microspheres-based optosensor for visual detection of nitrite

Noor NS, Tan LL, Heng LY, Chong KF, Tajuddin SN

Food Chem, 2016 Sep 15;207:132-8.
PMID: 27080889 DOI: 10.1016/j.foodchem.2016.03.088

A new optosensor for visual quantitation of nitrite (NO2(-)) ion has been fabricated by physically immobilizing Safranine O (SO) reagent onto a self-adhesive poly(n-butyl acrylate) [poly(nBA)] microspheres matrix, which was synthesized via facile microemulsion UV lithography technique. Evaluation and optimization of the optical NO2(-) ion sensor was performed with a fiber optic reflectance spectrophotometer. Scanning electron micrograph showed well-shaped and smooth spherical morphology of the poly(nBA) microspheres with a narrow particles size distribution from 0.6μm up to 1.8μm. The uniform size distribution of the acrylic microspheres promoted homogeneity of the immobilized SO reagent molecules on the microspheres' surfaces, thereby enhanced the sensing response reproducibility (<5% RSD) with a linear range obtained from 10 to 100ppm NO2(-) ion. The micro-sized acrylic immobilization matrix demonstrated no significant barrier for diffusion of reactant and product, and served as a good solid state ion transport medium for reflectometric nitrite determination in food samples.
Fulltext The Association Between Bullous Pemphigoid and Neurological Disorders in A Selected Malaysian Population

Kwan Z, Lai YN, Ch'ng CC, Tan AH, Tan LL, Robinson S, et al.

Med J Malaysia, 2015 Apr;70(2):81-5.
PMID: 26162382 MyJurnal

BACKGROUND: An association of bullous pemphigoid with neurological disorders has been reported. The objectives of this study were to review the clinical characteristics of patients with bullous pemphigoid and compare the association between bullous pemphigoid and various neurological disorders and comorbidities.

METHODS: This was a retrospective case-control study involving 43 patients with bullous pemphigoid and 43 age-, sex- and ethnicity-matched controls.

RESULTS: There was a statistically significant association between bullous pemphigoid and neurological disorders [Odds Ratio (OR) = 3.5, 95% Confidence Interval (CI) 1.3 to 9.2, p=0.011 and adjusted OR=3.5, 95% CI 1.2-10.3, p=0.026], in particular for dementia (p=0.002). Although stroke was more common among patients with bullous pemphigoid, this association was not statistically significant with OR of 1.9 (95% CI 0.7 to 5.2) and adjusted OR of 2.1 (95% CI 0.6 to 7.2). Similarly both ischaemic stroke (OR 1.5, 95% CI 0.5 to 4.2) and haemorrhagic stroke (OR 1.5, 95% CI 0.2 to 9.7) were more common. Other neurological disorders more common among patients with bullous pemphigoid were Parkinson's disease and epilepsy. Dyslipidaemia was significantly less common among patients with bullous pemphigoid (OR 0.4, 95% CI 0.1 to 0.9, p=0.033).

CONCLUSION: A combination of an inflammatory process, prothrombotic state and endothelial activation leads to an increased frequency of neurological disorders among patients with bullous pemphigoid. Thus, a holistic approach to patient care, including screening for dementia and control of comorbidities, should be practised as bullous pemphigoid affects more than just the skin.
Fulltext Electrochemical Biosensor for Nitrite Based on Polyacrylic-Graphene Composite Film with Covalently Immobilized Hemoglobin

Raja Jamaluddin RZA, Yook Heng L, Tan LL, Chong KF

Sensors (Basel), 2018 Apr 26;18(5).
PMID: 29701688 DOI: 10.3390/s18051343

A new biosensor for the analysis of nitrite in food was developed based on hemoglobin (Hb) covalently immobilized on the succinimide functionalized poly(n-butyl acrylate)-graphene [poly(nBA)-rGO] composite film deposited on a carbon-paste screen-printed electrode (SPE). The immobilized Hb on the poly(nBA)-rGO conducting matrix exhibited electrocatalytic ability for the reduction of nitrite with significant enhancement in the reduction peak at −0.6 V versus Ag/AgCl reference electrode. Thus, direct determination of nitrite can be achieved by monitoring the cathodic peak current signal of the proposed polyacrylic-graphene hybrid film-based voltammetric nitrite biosensor. The nitrite biosensor exhibited a reproducible dynamic linear response range from 0.05⁻5 mg L−1 nitrite and a detection limit of 0.03 mg L−1. No significant interference was observed by potential interfering ions such as Ca2+, Na⁺, K⁺, NH₄⁺, Mg2+, and NO₃− ions. Analysis of nitrite in both raw and processed edible bird’s nest (EBN) samples demonstrated recovery of close to 100%. The covalent immobilization of Hb on poly(nBA)-rGO composite film has improved the performance of the electrochemical nitrite biosensor in terms of broader detection range, lower detection limit, and prolonged biosensor stability.
Zinc(II) salphen complex-based fluorescence optical sensor for biogenic amine detection

Sahudin MA, Su'ait MS, Tan LL, Lee YH, Abd Karim NH

Anal Bioanal Chem, 2019 Sep;411(24):6449-6461.
PMID: 31392436 DOI: 10.1007/s00216-019-02025-4

Biogenic amines have attracted interest among researchers because of their importance as biomarkers in determining the quality of food freshness in the food industry. A rapid and simple technique that is able to detect biogenic amines is needed. In this work, a new optical sensing material for one of the biogenic amines, histamine, based on a new zinc(II) salphen complex was developed. The binding of zinc(II) complexes without an electron-withdrawing group (complex 1) and with electron-withdrawing groups (F, complex 2; Cl, complex 3) to histamine resulted in enhancement of fluorescence. All complexes exhibited high affinity for histamine [binding constant of (7.14 ± 0.80) × 104, (3.33 ± 0.03) × 105, and (2.35 ± 0.14) × 105 M-1, respectively]. Complex 2 was chosen as the sensing material for further development of an optical sensor for biogenic amines in the following step since it displayed enhanced optical properties in comparison with complexes 1 and 3. The optical sensor for biogenic amines used silica microparticles as the immobilisation support and histamine as the analyte. The optical sensor had a limit of detection for histamine of 4.4 × 10-12 M, with a linear working range between 1.0 × 10-11 and 1.0 × 10-6 M (R2 = 0.9844). The sensor showed good reproducibility, with a low relative standard deviation (5.5 %). In addition, the sensor exhibited good selectivity towards histamine and cadaverine over other amines, such as 1,2-phenylenediamine, triethylamine, and trimethylamine. Recovery and real sample studies suggested that complex 2 could be a promising biogenic amine optical sensing material that can be applied in the food industry, especially in controlling the safety of food for it to remain fresh and healthy for consumption.
Reflectance aptasensor based on metal salphen label for rapid and facile determination of insulin

Taib M, Tan LL, Abd Karim NH, Ta GC, Heng LY, Khalid B

Talanta, 2020 Jan 15;207:120321.
PMID: 31594568 DOI: 10.1016/j.talanta.2019.120321

An optical aptasensor-based sensing platform for rapid insulin detection was fabricated. Aminated porous silica microparticles (PSiMPs) were synthesized via a facile mini-emulsion method to provide large surface area for covalent immobilization of insulin-binding DNA aptamer (IGA3) by glutaraldehyde cross-linking protocol. A Nickel-salphen type complex with piperidine side chain [Ni(II)-SP] was synthesized with a simple one-pot reaction, and functionalized as an optical label due to strong π-π interaction between aromatic carbons of G-quadruplex DNA aptamer and planar aromatic groups of Ni(II)-SP to form the immobilized IGA3-Ni(II)-SP complex, i.e. the dye-labeled aptamer, thereby bringing yellow colouration to the immobilized G-quartet plane. Optical characterization of aptasensor towards insulin binding was carried out with a fiber optic reflectance spectrophotometer. The maximum reflectance intensity of the immobilized IGA3-Ni(II)-SP complex at 656 nm decreased upon binding with insulin as aptasensor changed to brownish orange colouration in the background. This allows optical detection of insulin as the colour change of aptasensor is dependent on the insulin concentration. The linear detection range of the aptasensor is obtained from 10 to 50 μIU mL-1 (R2 = 0.9757), which conformed to the normal fasting insulin levels in human with a limit of detection (LOD) at 3.71 μIU mL-1. The aptasensor showed fast response time of 40 min and long shelf life stability of >3 weeks. Insulin detection using healthy human serums with informed consent provided by participants suggests the DNA aptamer biosensor was in good agreement with ELISA standard method using BIOMATIK Human INS (Insulin) ELISA Kit.
Characteristics of skin cancers among adult patients in an urban Malaysian population

Han WH, Yong SS, Tan LL, Toh YF, Chew MF, Pailoor J, et al.

Australas J Dermatol, 2019 Nov;60(4):e327-e329.
PMID: 31222718 DOI: 10.1111/ajd.13106

There has been a rising incidence of skin cancers among Asians in recent years. We present a retrospective analysis of 106 skin cancers and analysed the demography, clinical subtypes of skin cancers and surgical techniques used for skin cancer treatment. In our population, skin cancers were most frequently basal cell carcinomas and diagnosed among ethnic Chinese patients.
Canine and feline cutaneous screw-worm myiasis in Malaysia: clinical aspects in 76 cases

Han HS, Toh PY, Yoong HB, Loh HM, Tan LL, Ng YY

Vet Dermatol, 2018 Oct;29(5):442-e148.
PMID: 30066413 DOI: 10.1111/vde.12672

BACKGROUND: Cutaneous screw-worm myiasis in companion animals either due to the New World screw-worm, Cochliomyia hominivorax or the Old World screw-worm, Chrysomya bezziana, has been reported particularly in tropical and subtropical regions of the world. Although treatment of screw-worm myiasis in dogs has been described, few studies have been conducted regarding its clinical and epidemiological aspects in companion animals.
OBJECTIVES: To describe clinical and epidemiological aspects of canine and feline screw-worm myiasis.
ANIMALS: Naturally infested dogs and cats, presented to five veterinary clinics in four Malaysian states from September 2017 to February 2018.
METHODS AND MATERIALS: Cutaneous screw-worm myiasis was diagnosed based on clinical signs and visual examination of burrowing larvae within lesion. Age, breed, gender, anatomical site of infestation and suspected underlying predisposing causes were investigated.
RESULTS: A total of 55 dogs and 21 cats were included in the study. Intact male mixed breed dogs (mean age 58 months) and intact male domestic short hair cats (mean age 24 months) with suspected fight-related wounds were most commonly presented with exudative and ulcerative lesions associated with screw-worm myiasis. The most common anatomical sites of infestation in the dogs were the external ear canals, followed by the perineum and medial canthus. For the cats, the most commonly affected areas were paws and tail. Five cats with screw-worm myiasis were concurrently infected with sporotrichosis.
CONCLUSION AND CLINICAL RELEVANCE: Aggression between unneutered animals is a likely underlying cause for cutaneous screw-worm myiasis in both cats and dogs. Sporotrichosis was also a potential predisposing cause for screw-worm myiasis in cats.
Fulltext Syringocystadenoma papilliferum arising in a naevus sebaceous

Faheem NAA, Kwan Z, Yong ASW, Ch'ng CC, Tan KK, Naicker M, et al.

Malays J Pathol, 2019 Apr;41(1):47-49.
PMID: 31025637

Naevus sebaceus is a cutaneous hamartoma with the potential of developing into benign or malignant neoplasms. Syringocystadenoma papilliferum (SCAP) have been reported to originate from naevus sebaceus. SCAP is a rare, benign adnexal skin tumour of apocrine or eccrine type of differentiation which typically presents as a nodule or a plaque on the scalp or face. We report a case of syringocystadenoma papilliferum arising in an undiagnosed pre-existing naevus sebaceus in a 56-year-old female.
An electrochemical DNA biosensor fabricated from graphene decorated with graphitic nanospheres

Raja Jamaluddin RZA, Tan LL, Chong KF, Heng LY

Nanotechnology, 2020 Nov 27;31(48):485501.
PMID: 32748805 DOI: 10.1088/1361-6528/abab2e

Graphene decorated with graphitic nanospheres functionalized with pyrene butyric acid (PBA) is used for the first time to fabricate a DNA biosensor. The electrode was formed by attaching a DNA probe onto PBA, which had been stacked onto a graphene material decorated with graphene nanospheres (GNSs). The nanomaterial was drop-coated onto a carbon screen-printed electrode (SPE) to create the GNS-PBA modified electrode (GNS-PBA/SPE). A simple method was used to produce GNS by annealing graphene oxide (GO) solution at high temperature. Field emission scanning electron micrographs confirmed the presence of a spherical shape of GNS with a diameter range of 40-80 nm. A stable and uniform PBA-modified GNS (GNS-PBA) was obtained with a facile ultrasonication step. Thus allowing aminated DNA probes of genetically modified (GM) soybean to be attached to the nanomaterials to form the DNA biosensor. The GNS-PBA/SPE exhibited excellent electrical conductivity via cyclic voltammetry (CV) and differential pulse voltammetry (DPV) tests using potassium ferricyanide (K3[Fe(CN)6]) as the electroactive probe. By employing an anthraquinone monosulfonic acid (AQMS) redox intercalator as the DNA hybridization indicator, the biosensor response was evaluated using the DPV electrochemical method. A good linear relationship between AQMS oxidation peak current and target DNA concentrations from 1.0 × 10-16 to 1.0 × 10-8 M with a limit of detection (LOD) of less than 1.0 × 10-16 M was obtained. Selectivity experiments revealed that the voltammetric GM DNA biosensor could discriminate complementary sequences of GM soybean from non-complementary sequences and hence good recoveries were obtained for real GM soybean sample analysis. The main advantage of using GNS is an improvement of the DNA biosensor analytical performance.
Two-dimensional bismuth oxybromide coupled with molybdenum disulphide for enhanced dye degradation using low power energy-saving light bulb

Lee WPC, Wong FH, Attenborough NK, Kong XY, Tan LL, Sumathi S, et al.

J Environ Manage, 2017 Jul 15;197:63-69.
PMID: 28324782 DOI: 10.1016/j.jenvman.2017.03.027

In the present work, two-dimensional bismuth oxybromide (BiOBr) was synthesized and coupled with co-catalyst molybdenum disulphide (MoS2) via a simple hydrothermal process. The photoactivity of the resulting hybrid photocatalyst (MoS2/BiOBr) was evaluated under the irradiation of 15 W energy-saving light bulb at ambient condition using Reactive Black 5 (RB5) as model dye solution. The photo-degradation of RB5 by BiOBr loaded with 0.2 wt% MoS2 (MoBi-2) exhibited more than 1.4 and 5.0 folds of enhancement over pristine BiOBr and titanium dioxide (Degussa, P25), respectively. The increased photocatalytic performance was a result of an efficient migration of excited electrons from BiOBr to MoS2, prolonging the electron-hole pairs recombination rate. A possible charge transfer diagram of this hybrid composite photocatalyst, and the reaction mechanism for the photodegradation of RB5 were proposed.
Rapid detection of porcine DNA in processed food samples using a streamlined DNA extraction method combined with the SYBR Green real-time PCR assay

Tan LL, Ahmed SA, Ng SK, Citartan M, Raabe CA, Rozhdestvensky TS, et al.

Food Chem, 2020 Mar 30;309:125654.
PMID: 31678669 DOI: 10.1016/j.foodchem.2019.125654

A specialized DNA extraction method and a SYBR Green quantitative polymerase chain reaction (SyG-qPCR) assay were combined to generate a ready-to-use kit for rapid detection of porcine admixtures in processed meat products. Our qPCR assay utilized repetitive LINE-1 elements specific to the genome of Sus scrofa domesticus (pig) as a target and incorporated internal controls. We improved the genomic DNA extraction method, and reduced extraction times to the minimum. The method was validated for specificity, sensitivity (0.001% w/w) and robustness, and values were compared with those of a commercially available kit. We also tested our method using 121 processed food products and consistently detected amplification only in samples containing pork. Due to its efficiency and cost-effectiveness, our method represents a valuable new method for detecting food adulteration with pork that is superior to existing quality control approaches.
Engineering surface oxygen defects on tungsten oxide to boost photocatalytic oxygen evolution from water splitting

Chew YH, Tang JY, Tan LJ, Choi BWJ, Tan LL, Chai SP

Chem Commun (Camb), 2019 May 28;55(44):6265-6268.
PMID: 31086906 DOI: 10.1039/c9cc01449g

The engineering of surface oxygen vacancies (OVs) in WO3 was primitively done using a facile solvothermal method. The photocatalytic activities of the as-prepared samples were studied by evaluating their performances in the photocatalytic OER. The best sample (W-3) yielded 57.6 μmol of O2 in 6 h under the illumination of simulated sunlight.
Nitrogen-doped carbon quantum dots-decorated 2D graphitic carbon nitride as a promising photocatalyst for environmental remediation: A study on the importance of hybridization approach

Seng RX, Tan LL, Lee WPC, Ong WJ, Chai SP

J Environ Manage, 2020 Feb 01;255:109936.
PMID: 32063312 DOI: 10.1016/j.jenvman.2019.109936

Growing concerns of water pollution by dye pollutants from the textile industry has led to vast research interest to find green solutions to address this issue. In recent years, heterogeneous photocatalysis has harvested tremendous attention from researchers due to its powerful potential applications in tackling many important energy and environmental challenges at a global level. To fully utilise the broad spectrum of solar energy has been a common aim in the photocatalyst industry. This study focuses on the development of an efficient, highly thermal and chemical stable, environmentally friendly and metal-free graphitic carbon nitride (g-C3N4) to overcome the problem of fast charge recombination which hinders photocatalytic performances. Nitrogen-doped carbon quantum dots (NCQDs) known for its high electronic and optical functionality properties is believed to achieve photocatalytic enhancement by efficient charge separation through forming heterogeneous interfaces. Hence, the current work focuses on the hybridisation of NCQDs and g-C3N4 to produce a composite photocatalyst for methylene blue (MB) degradation under LED light irradiation. The optimal hybridisation method and the mass loading required for maximum attainable MB degradation were systematically investigated. The optimum photocatalyst, 1 wt% NCQD/g-C3N4 composite was shown to exhibit a 2.6-fold increase in photocatalytic activity over bare g-C3N4. Moreover, the optimum sample displayed excellent stability and durability after three consecutive degradation cycles, retaining 91.2% of its original efficiency. Scavenging tests were also performed where reactive species, photon-hole (h+) was identified as the primary active species initiating the pollutant degradation mechanism. The findings of this study successfully shed light on the hybridisation methods of NCQDs which improve existing g-C3N4 photocatalyst systems for environmental remediation by utilising solar energy.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links