Displaying publications 21 - 40 of 63 in total

Abstract:
Sort:
  1. Rushdi AI, bin Abas MR, Didyk BM
    Environ Sci Technol, 2003 Jan 1;37(1):16-21.
    PMID: 12542285
    The occurrence of n-alkanoic acids, amides, and nitriles in samples of aerosol particulate matter from Kuala Lumpur and Santiago suggests that emissions from cooking and biomass burning are the primary sources of these organic markers in the atmosphere. It is proposed that fatty acids react with ammonia during biomass burning or combustion to produce amides and nitriles, which can be applied as useful biomarker tracers. To test this hypothesis, nonadecanoic acid and hexadecanamide were used as reactants in hydrous pyrolysis experiments. These experiments produced amides and nitriles and indicated that ammonia is an essential agent in their formation. Thus amides and nitriles are of utility as indicators for input from combustion and biomass burning in the ambient atmosphere.
    Matched MeSH terms: Amides/analysis*
  2. Rica MA, Norlia A, Rohaizak M, Naqiyah I
    Asian J Surg, 2007 Jan;30(1):34-9.
    PMID: 17337369
    OBJECTIVE: The aim of this study was to investigate if preemptive local infiltration (PLA) with ropivacaine could improve postoperative pain and determine its effect on drain output postmastectomy with axillary dissection.
    METHODS: This was a prospective, randomized trial comprising 30 women allocated to two groups: one to receive postoperative wound infiltration (POW) of 20 mL of 0.2% (40 mg) ropivacaine (Naropin) versus PLA with 20 mL of 0.2% ropivacaine (Naropin) diluted with 80 mL of 0.9% saline, total volume 100 mL. A visual analogue scale (0-100 mm) and angle of shoulder abduction were used for evaluation of pain. Postoperatively, all patients received oral ibuprofen 400 mg tds.
    RESULTS: There was no significant difference in postoperative pain for the first 3 days between the two groups. There were wider shoulder abduction angles in the 1st and 3rd postoperative days in the PLA group, but this was not significant. Operative time was significantly shorter in the PLA group than in the POW group (69.34+/-59.37 minutes vs. 109.67+/-26.96 minutes; p=0.02). The axillary drain was removed earlier in the preemptive group, 5.4+/-1.55 days versus 6.8+/-2.04 days in the postoperative group (p=0.04).
    CONCLUSION: We found no difference in postoperative pain between preemptive tumescent ropivacaine infiltration and postoperative ropivacaine wound infiltration.
    Matched MeSH terms: Amides/administration & dosage*
  3. Rashidah, S., Jinap, S., Nazamid, S., Jamilah, B.
    MyJurnal
    This study was carried out to extract and compare the characteristic ability of globulins from cottonseed, alfalfa seed, pea seed, mung bean and French bean with cocoa seeds to produce cocoa-specific aroma precursors. The extracted globulins were compared through SDS PAGE, amino acid and oligopeptide profiles. A very low recovery was obtained during globulin extraction from different seeds ranging from 0.5% to 2.7%. Cottonseed produced the highest total protein (13.90 mg/g), followed by cocoa seed (11.91 mg/g), whereas alfalfa seed, mung bean, pea seed and French bean produced 7.86, 4.77, 4.59 and 3.89 mg/g respectively. Two distinctive bands of 51.1 and 33.0 kDa were observed for cocoa vicilin-class globulin (VCG) from SDS PAGE. More than three bands were shown for other seed globulins. Comparative HPLC analyses of the obtained peptide mixtures revealed different and complex patterns of predominantly hydrophobic peptides. A similar high content of amides (glutamic acids-glutamine, aspartic acid- asparagine and arginine) and low concentrations of lysine were observed in all seeds globulin.
    Matched MeSH terms: Amides
  4. Ramani VC, Shah RD, Jotani MM, Tiekink ERT
    Acta Crystallogr E Crystallogr Commun, 2018 Sep 01;74(Pt 9):1254-1258.
    PMID: 30225111 DOI: 10.1107/S2056989018011477
    The title compound, C16H15N5O2, adopts the shape of the letter L with the dihedral angle between the outer pyridyl rings being 78.37 (5)°; the dihedral angles between the central pyrazolyl ring (r.m.s. deviation = 0.0023 Å) and the methyl-ene-bound pyridyl and methyoxypyridyl rings are 77.68 (5) and 7.84 (10)°, respectively. Intra-molecular amide-N-H⋯N(pyrazol-yl) and pyridyl-C-H⋯O(amide) inter-actions are evident and these preclude the participation of the amide-N-H and O atoms in inter-molecular inter-actions. The most notable feature of the mol-ecular packing is the formation of linear supra-molecular chains aligned along the b-axis direction mediated by weak carbonyl-C=O⋯π(triazol-yl) inter-actions. An analysis of the calculated Hirshfeld surfaces point to the importance of H⋯H (46.4%), C⋯H (22.4%), O⋯H (11.9%) and N⋯H (11.1%) contacts in the crystal.
    Matched MeSH terms: Amides
  5. Olalere OA, Gan CY, Abdurahman HN, Adeyi O, Ahmad MM
    Heliyon, 2020 Aug;6(8):e04770.
    PMID: 32923719 DOI: 10.1016/j.heliyon.2020.e04770
    The increase in wastes generated from jackfruit seeds has been largely under-utilized in Malaysia. Due to the high nutritional and medicinal content embedded in the cellulosic structure of jackfruit wastes, a need then arises for their physicochemical elucidations. In this study, the extraction of Artocarpus heterophyllus seed was carefully investigated using Taguchi orthogonal optimization design. Complete functional group characteristics and chemical profile of the A. heterophyllus seed extracts were obtained using different physicochemical characterization. The optimal conditions of the microwave extraction parameters were determined at 5 min of irradiation time, 450 W of power and 50 °C of temperature. Under this condition, the optimal yield of 17.34 (mg/g) % was achieved at an SNR ratio of 24.78. The mass spectrometry analysis tentatively identified a total of 90 and 148 secondary metabolites at positive and negative ESI modes, respectively. The chemical profile obtained provided a baseline reference for further investigation on the food and medicinal bioactive from Artocarpus heterophyllus seed oleoresins. The FT-infrared emission spectrum shows the presence of some specific carbohydrates and amide protein functional groups directly linked to C-O (1008 cm-1) the carbonyl (C=O) groups, respectively. Moreover, the morphological characteristics of the jackfruit raw and crude extracts conspicuously revealed large-sized globules which suggest the carbohydrates and protein contents. The result of this study indicates that the use of microwave extraction technology produced high-quality extracts with lower degradation of the thermal labile constituents. This will assist in determining the suitable conditions necessary for the total recovery of medicinal and nutritional constituents and conversion of agricultural waste products into useful products.
    Matched MeSH terms: Amides
  6. Najjar-Tabrizi R, Javadi A, Sharifan A, Chew KW, Lay CH, Show PL, et al.
    Biotechnol Rep (Amst), 2020 Sep;27:e00507.
    PMID: 32775231 DOI: 10.1016/j.btre.2020.e00507
    Saponin was extracted from Acanthophyllum glandulosum root under subcritical water conditions, and effects of root powder and pH of the solution were evaluated on the concentration of the saponin as manifested in its foamability and antioxidant activity using RSM. FT-IR analysis indicated that A. glandulosum root extract had 2 main functional groups (hydroxyl and amide I groups). Saponin with the highest foam height (4.66 cm), concentration (0.080 ppm) and antioxidant activity (90.6 %) was extracted using 10 g of the root powder and pH value of 4. Non-significant differences were observed between the predicted and experimental values of the extraction response variables. The study demonstrated good appropriateness of resulted models by Response Surface Methodology. Furthermore, higher values of R2 was attained for the foamability (>0.81) and antioxidant activity (>0.97), as well as large p-values (p > 0.05) indication of their lack-of-fit response verified the acceptable fitness of the provided models. The extracted saponin also showed bactericidal effect, which shows potential as a natural antibacterial compound.
    Matched MeSH terms: Amides
  7. Moshikur RM, Ali MK, Wakabayashi R, Moniruzzaman M, Goto M
    Mol Pharm, 2021 08 02;18(8):3108-3115.
    PMID: 34250805 DOI: 10.1021/acs.molpharmaceut.1c00324
    Coronavirus disease 2019 (COVID-19) has spread across the world, and no specific antiviral drugs have yet been approved to combat this disease. Favipiravir (FAV) is an antiviral drug that is currently in clinical trials for use against COVID-19. However, the delivery of FAV is challenging because of its limited solubility, and its formulation is difficult with common organic solvents and water. To address these issues, four FAV ionic liquids (FAV-ILs) were synthesized as potent antiviral prodrugs and were fully characterized by nuclear magnetic resonance (NMR) spectroscopy, Fourier-transform infrared (FT-IR) spectrometry, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), derivative thermogravimetry (DTG), and differential scanning calorimetry (DSC). The aqueous solubility and in vivo pharmacokinetic properties of the FAV-ILs were also evaluated. The FAV-ILs exhibited improved aqueous solubility by 78 to 125 orders of magnitude when compared with that of free FAV. Upon oral dosing in mice, the absolute bioavailability of the β-alanine ethyl ester FAV formulation was increased 1.9-fold compared with that of the control FAV formulation. The peak blood concentration, elimination half-life, and mean absorption time of FAV were also increased by 1.5-, 2.0-, and 1.5-fold, respectively, compared with the control. Furthermore, the FAV in the FAV-ILs exhibited significantly different biodistribution compared with the control FAV formulation. Interestingly, drug accumulation in the lungs and liver was improved 1.5-fold and 1.3-fold, respectively, compared with the control FAV formulation. These results indicate that the use of ILs exhibits potential as a simple, scalable strategy to improve the solubility and oral absorption of hydrophobic drugs, such as FAV.
    Matched MeSH terms: Amides/administration & dosage*; Amides/chemical synthesis; Amides/pharmacokinetics; Amides/chemistry
  8. Mollataghi A, Hadi AH, Cheah SC
    Molecules, 2012 Apr 05;17(4):4197-208.
    PMID: 22481540 DOI: 10.3390/molecules17044197
    A new dienamide, (2E,4E)-7-(3',4'-dimethoxyphenyl)-N-ethyl-6-(R)-hydroxyhepta- 2,4-dienamide, named (-)-kunstleramide (1), were isolated from the bark of Beilschmiedia kunstleri Gamble together with one neolignan: (+)-kunstlerone (2) and seven known alkaloids: (+)-nornuciferine (3), (-)-isocaryachine (4), (+)-cassythicine (5), (+)-laurotetanine (6), (+)-boldine (7), noratherosperminine (8), (+)-N-demethylphyllocaryptine (9). Their structures were established from spectroscopic techniques, most notably 1D- and 2D-NMR, UV, IR, OR, circular dichroism (CD) spectra and LCMS-IT-TOF. (-)-Kunstleramide (1) exhibited very poor dose-dependent inhibition of DPPH activity, with an IC₅₀ value of 179.5 ± 4.4 μg/mL, but showed a moderate cytotoxic effect on MTT assays of A375, A549, HT-29, PC-3 and WRL-68 with EC₅₀ values of 64.65, 44.74, 55.94, 73.87 and 70.95 µg/mL, respectively.
    Matched MeSH terms: Amides/pharmacology*; Amides/chemistry
  9. Misiran KB, Yahaya LS
    Middle East J Anaesthesiol, 2013 Feb;22(1):59-64.
    PMID: 23833852
    This prospective randomized single-blinded study was conducted to determine whether there were differences in consumption, demand dosing and postoperative analgesia quality between PCEA using ropivacaine and levobupivacaine. Seventy patients with ASA classification I and II aged 18 to 80 years old scheduled for elective total knee replacement or total hip replacement were studied. All patients received CSE and then were randomly allocated to receive either ropivacaine 0.165% (Group A) or levobupivacaine 0.125% (Group B) both added with fentanyl 2.0 mcro g/ml via epidural route. PCEA regime was offered for 48 hours with additional standard orthopaedic practice of oral analgesia (etoricoxib 120 mg OD and paracetamol 1.0 gm QID) on the second postoperative day. Basal infusion of PCEA was at 3.0 ml/hour and discontinued after 24 hours following started of PCEA. The consumption of local anaesthetics used within the first 24 hours (basal + demand) and 48 hours (total basal + total demand) were recorded. The VAS pain score, sedation score, side effects and vital signs (blood pressure, heart rate and respiratory rate) were also recorded every four hours for 48 hours. This study showed that the total volume of drug used was significantly higher in Group A (163.31+/- 29.01 ml) than Group B (142.69 +/- 30.93ml) (p<0. 01). The mean dose of Group A for the first 48 hours after surgery was 251.43 +/- 70.02mg and was significantly greater than the mean dose of Group B (178.91 +/-42.33 mg) (p<0.01). The numbers of PCEA boluses delivered (D) and PCEA attempts (A) were higher in the Group A (22.37 +/-7.32 and 27.66 +/- 9.12) in contrast to Group B (17.63 +/- 7.71 and 24.40 +/- 11.51) but the differences were not statistically significant. The ratio D/A showed significantly higher in Group A (0.83 +/- 0.13) than Group B (0.74 +/- 0.15) (p<0. 02). The VAS pain score was similar for both groups. One patient in Group B had vomiting and there was no sedation, hypotension, pruritus or motor block recorded in both groups. In conclusion this study showed that both PCEA using ropivacaine 0.165% with fentanyl 2.0 micro g/ml and levobupivacaine 0.125% with fentanyl 2.0 micro g/ml provided effective postoperative analgesia within the first 48 hours of major lower limb orthopaedic surgery despite clinically significant dose difference. There was no hypotension, pruritus, sedation or motor block recorded in both groups.
    Matched MeSH terms: Amides/administration & dosage*
  10. Mat Yusuf SNA, Ng YM, Ayub AD, Ngalim SH, Lim V
    Polymers (Basel), 2017 Jul 27;9(8).
    PMID: 30970988 DOI: 10.3390/polym9080311
    Discovery and use of biocompatible polymers offers great promise in the pharmaceutical field, particularly in drug delivery systems. Disulphide bonds, which commonly occur in peptides and proteins and have been used as drug-glutathione conjugates, are reductively cleaved in the colon. The intrinsic stability of a disulphide relative to thiol groups is determined by the redox potential of the environment. The objective of this study was to synthesise a trimesic acid-based disulphide cross-linked polymer that could potentially be used for targeted delivery to the colon. The monomer was synthesised by an amide coupling reaction between trimesic acid and (triphenylmethyl) thioethylamine using a two-step synthesis method. The s-trityl group was removed using a cocktail of trifluoroacetic acid and triethylsilane to expose the thiols in preparation for further polymerisation. The resulting polymers (P10, P15, P21, P25, and P51, generated using different molar ratios) were reduced after 1.5 h of reduction time. Scanning electron microscopy images of the polymers showed spherical, loose, or tight patterns depending on the molar ratio of polymerisation. These polymers also exhibited efficient dissolution under various gastrointestinal conditions. Of the five polymers tested, P10 and P15 appeared to be promising drug delivery vehicles for poorly soluble drugs, due to the hydrophobic nature of the polymers.
    Matched MeSH terms: Amides
  11. Mageswaran R, Choy YC
    Med J Malaysia, 2010 Dec;65(4):300-3.
    PMID: 21901950
    A prospective randomized double-blind study was conducted which involved, 60 ASA 1-2, aged 18-65 years patients, who had elective or emergency orthopaedic surgeries of the upper limbs. They were randomly divided into two groups: Group I received 30 mls of 0.5% ropivacaine; and Group II received 0.5% levobupivacaine for infraclavicular brachial plexus block based on the coracoid approach. The onset time required for sensory block of all required dermatomes (C5-T1) and the onset time of motor block were documented. Based on the Visual Analogue Score, pain scores were recorded every 30 minutes during surgery and at the 6th hour. The mean onset time (SD) for sensory block with ropivacaine was 13.5 +/- 2.9 minutes compared to levobupivacaine at 11.1 +/- 2.6 minutes (p = 0.003). The onset time for motor block was 19.0 +/- 2.7 minutes in Group I compared to 17.1 +/- 2.6 minutes (p = 0.013) in Group II. Patients in both groups experienced both mild to moderate pain at the 6th hour. In conclusion, there were statistically significant differences in the onset-time for sensory and motor block. However, there was no statistically significant difference in terms of effectiveness of analgesia at the 6th hour. Although the clinical advantage of levobupivacine is not substantial, its safety profile becomes a major consideration in the choice of local anaesthetic for brachial plexus block where a large volume is required for an effective result.
    Matched MeSH terms: Amides/pharmacology*
  12. Maarof M, Mohd Nadzir M, Sin Mun L, Fauzi MB, Chowdhury SR, Idrus RBH, et al.
    Polymers (Basel), 2021 Feb 08;13(4).
    PMID: 33567703 DOI: 10.3390/polym13040508
    The current strategy for rapid wound healing treatment involves combining a biomaterial and cell-secreted proteins or biomolecules. This study was aimed at characterizing 3-dimensional (3D) collagen hydrogels fortified with dermal fibroblast-conditioned medium (DFCM) as a readily available acellular skin substitute. Confluent fibroblasts were cultured with serum-free keratinocyte-specific medium (KM1 and KM2) and fibroblast-specific medium (FM) to obtain DFCM. Subsequently, the DFCM was mixed with collagen (Col) hydrogel and chondroitin-4-sulphate (C4S) to fabricate 3D constructs termed Col/C4S/DFCM-KM1, Col/C4S/DFCM-KM2, and Col/C4S/DFCM-FM. The constructs successfully formed soft, semi-solid and translucent hydrogels within 1 h of incubation at 37 °C with strength of <2.5 Newton (N). The Col/C4S/DFCM demonstrated significantly lower turbidity compared to the control groups. The Col/C4S/DFCM also showed a lower percentage of porosity (KM1: 35.15 ± 9.76%; KM2: 6.85 ± 1.60%; FM: 14.14 ± 7.65%) compared to the Col (105.14 ± 11.87%) and Col/C4S (143.44 ± 27.72%) constructs. There were no changes in both swelling and degradation among all constructs. Fourier transform infrared spectrometry showed that all groups consisted of oxygen-hydrogen bonds (O-H) and amide I, II, and III. In conclusion, the Col/C4S/DFCM constructs maintain the characteristics of native collagen and can synergistically deliver essential biomolecules for future use in skin therapeutic applications.
    Matched MeSH terms: Amides
  13. Lopez JAV, Petitbois JG, Vairappan CS, Umezawa T, Matsuda F, Okino T
    Org. Lett., 2017 08 18;19(16):4231-4234.
    PMID: 28783344 DOI: 10.1021/acs.orglett.7b01869
    Two new chlorinated fatty acid amides, columbamides D (1) and E (2), along with apratoxins A and C and wewakazole, were isolated from the organic extract of a Moorea bouillonii sample from Sabah, Malaysia. Structure elucidation was accomplished by a combination of MS and NMR analyses. The total synthesis of all four stereoisomers of 1 was completed, and the absolute configuration was determined by chiral-phase HPLC and Marfey's analysis.
    Matched MeSH terms: Amides/isolation & purification*; Amides/chemistry
  14. Liow CH, Sahrim Ahmad, Khairiah Badri
    In-situ polymerization method was used to prepare palm-based polyurethane (PU) composites loading with 15 wt% magnetite (Fe3O4), polyaniline (PANI) and Fe3O4 coated with PANI labeled as PU15, PP and PPM, respectively. FTIR spectroscopy analysis indicated a shift in the carbonyl, C=O and NH in PP. The shift of the peak indicated that there was hydrogen bonding between the C=O (proton acceptor) of urethane with NH (proton-donator) of PANI. PPM gave the highest impact and flexural strengths at 4875 kJ/ m2 and 42 MPa, respectively but with the lowest flexural modulus (1050 MPa). Two-stage degradation behavior was observed in the TGA thermogram.
    Matched MeSH terms: Amides
  15. Lim V, Peh KK, Sahudin S
    Int J Mol Sci, 2013;14(12):24670-91.
    PMID: 24351841 DOI: 10.3390/ijms141224670
    The use of disulphide polymers, a low redox potential responsive delivery, is one strategy for targeting drugs to the colon so that they are specifically released there. The objective of this study was to synthesise a new cross-linked disulphide-containing polymer based on the amino acid cysteine as a colon drug delivery system and to evaluate the efficiency of the polymers for colon targeted drug delivery under the condition of a low redox potential. The disulphide cross-linked polymers were synthesised via air oxidation of 1,2-ethanedithiol and 3-mercapto-N-2-(3-mercaptopropionamide)-3-mercapto propionic anhydride (trithiol monomers) using different ratio combinations. Four types of polymers were synthesised: P10, P11, P151, and P15. All compounds synthesised were characterised by NMR, IR, LC-MS, CHNS analysis, Raman spectrometry, SEM-EDX, and elemental mapping. The synthesised polymers were evaluated in chemical reduction studies that were performed in zinc/acetic acid solution. The suitability of each polymer for use in colon-targeted drug delivery was investigated in vitro using simulated conditions. Chemical reduction studies showed that all polymers were reduced after 0.5-1.0 h, but different polymers had different thiol concentrations. The bacterial degradation studies showed that the polymers were biodegraded in the anaerobic colonic bacterial medium. Degradation was most pronounced for polymer P15. This result complements the general consensus that biodegradability depends on the swellability of polymers in an aqueous environment. Overall, these results suggest that the cross-linked disulphide-containing polymers described herein could be used as coatings for drugs delivered to the colon.
    Matched MeSH terms: Amides/chemistry*
  16. Lim HJ, Hasan MS, Chinna K
    Rev Bras Anestesiol, 2016 Jul-Aug;66(4):341-5.
    PMID: 27155777 DOI: 10.1016/j.bjan.2016.04.006
    A high sodium concentration is known to antagonize local anesthetics when infiltrated around neural tissue. Thus, we hypothesized that the onset time for sensory and motor blockade, in supraclavicular brachial plexus block using ropivacaine diluted with dextrose would be shorter than with saline.
    Matched MeSH terms: Amides
  17. Lim HJ, Hasan MS, Chinna K
    Braz J Anesthesiol, 2016 Jul-Aug;66(4):341-5.
    PMID: 27343781 DOI: 10.1016/j.bjane.2014.11.012
    BACKGROUND AND OBJECTIVES: A high sodium concentration is known to antagonize local anesthetics when infiltrated around neural tissue. Thus, we hypothesized that the onset time for sensory and motor blockade, in supraclavicular brachial plexus block using ropivacaine diluted with dextrose would be shorter than with saline.

    METHODS: Patients scheduled for upper limb surgery were randomized to receive ultrasound guided supraclavicular brachial plexus block with 0.5% ropivacaine. Evaluation of sensory and motor blockade was performed every 5min for 60min. Patients were followed-up on postoperative day 1, and between days 7 and 10 for the presence of any complications. Twenty-five patients in each group were analyzed.

    RESULTS: Mean time for onset of analgesia for the dextrose group was 37.6±12.9min while the mean time for the saline group was 45.2±13.9min with a p-value of 0.05. The effect size was 0.567, which was moderate to large. No major complications were observed.

    CONCLUSION: We conclude that there was a decrease in onset time of analgesia when dextrose was used as a diluent instead of saline for ultrasound guided supraclavicular block.
    Matched MeSH terms: Amides/therapeutic use*
  18. Law WY, Asaruddin MR, Bhawani SA, Mohamad S
    BMC Res Notes, 2020 Nov 11;13(1):527.
    PMID: 33176880 DOI: 10.1186/s13104-020-05379-6
    OBJECTIVES: The aim of this study was to use Ligand-based pharmacophore modelling approach for four established antiviral drugs, namely remdesivir, lopinavir, ritonavir and hydroxychloroquine for COVID-19 inhibitors as training sets. In this study Twenty vanillin derivatives together with monolaurin and tetrodotoxin were used as test sets to evaluate as potential SARS-CoV-2 inhibitors. The Structure-based pharmacophore modelling approach was also performed using 5RE6, 5REX and 5RFZ in order to analyse the binding site and ligand-protein complex interactions.

    RESULTS: The pharmacophore modelling mode of 5RE6 displayed two Hydrogen Bond Acceptors (HBA) and one Hydrophobic (HY) interaction. Besides, the pharmacophore model of 5REX showed two HBA and two HY interactions. Finally, the pharmacophore model of 5RFZ showed three HBA and one HY interaction. Based on ligand-based approach, 20 Schiff-based vanillin derivatives, showed strong MPro inhibition activity. This was due to their good alignment and common features to PDB-5RE6. Similarly, monolaurin and tetrodotoxin displayed some significant activity against SARS-CoV-2. From structure-based approach, vanillin derivatives (1) to (12) displayed some potent MPro inhibition against SARS-CoV-2. Favipiravir, chloroquine and hydroxychloroquine also showed some significant MPro inhibition.

    Matched MeSH terms: Amides/pharmacology; Amides/chemistry
  19. Kow CS, Ramachandram DS, Hasan SS
    Int Immunopharmacol, 2022 Feb;103:108455.
    PMID: 34959188 DOI: 10.1016/j.intimp.2021.108455
    Matched MeSH terms: Amides/therapeutic use*
  20. Korula P, Alexander H, John JS, Kirubakaran R, Singh B, Tharyan P, et al.
    Cochrane Database Syst Rev, 2024 Feb 05;2(2):CD015219.
    PMID: 38314855 DOI: 10.1002/14651858.CD015219.pub2
    BACKGROUND: The coronavirus disease 2019 (COVID-19) pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) continues to challenge the health workforce and societies worldwide. Favipiravir was suggested by some experts to be effective and safe to use in COVID-19. Although this drug has been evaluated in randomized controlled trials (RCTs), it is still unclear if it has a definite role in the treatment of COVID-19.

    OBJECTIVES: To assess the effects of favipiravir compared to no treatment, supportive treatment, or other experimental antiviral treatment in people with acute COVID-19.

    SEARCH METHODS: We searched the Cochrane COVID-19 Study Register, MEDLINE, Embase, the World Health Organization (WHO) COVID-19 Global literature on coronavirus disease, and three other databases, up to 18 July 2023.

    SELECTION CRITERIA: We searched for RCTs evaluating the efficacy of favipiravir in treating people with COVID-19.

    DATA COLLECTION AND ANALYSIS: We used standard Cochrane methodological procedures for data collection and analysis. We used the GRADE approach to assess the certainty of evidence for each outcome.

    MAIN RESULTS: We included 25 trials that randomized 5750 adults (most under 60 years of age). The trials were conducted in Bahrain, Brazil, China, India, Iran, Kuwait, Malaysia, Mexico, Russia, Saudi Arabia, Thailand, the UK, and the USA. Most participants were hospitalized with mild to moderate disease (89%). Twenty-two of the 25 trials investigated the role of favipiravir compared to placebo or standard of care, whilst lopinavir/ritonavir was the comparator in two trials, and umifenovir in one trial. Most trials (24 of 25) initiated favipiravir at 1600 mg or 1800 mg twice daily for the first day, followed by 600 mg to 800 mg twice a day. The duration of treatment varied from five to 14 days. We do not know whether favipiravir reduces all-cause mortality at 28 to 30 days, or in-hospital (risk ratio (RR) 0.84, 95% confidence interval (CI) 0.49 to 1.46; 11 trials, 3459 participants; very low-certainty evidence). We do not know if favipiravir reduces the progression to invasive mechanical ventilation (RR 0.86, 95% CI 0.68 to 1.09; 8 trials, 1383 participants; very low-certainty evidence). Favipiravir may make little to no difference in the need for admission to hospital (if ambulatory) (RR 1.04, 95% CI 0.44 to 2.46; 4 trials, 670 participants; low-certainty evidence). We do not know if favipiravir reduces the time to clinical improvement (defined as time to a 2-point reduction in patients' admission status on the WHO's ordinal scale) (hazard ratio (HR) 1.13, 95% CI 0.69 to 1.83; 4 trials, 721 participants; very low-certainty evidence). Favipiravir may make little to no difference to the progression to oxygen therapy (RR 1.20, 95% CI 0.83 to 1.75; 2 trials, 543 participants; low-certainty evidence). Favipiravir may lead to an overall increased incidence of adverse events (RR 1.27, 95% CI 1.05 to 1.54; 18 trials, 4699 participants; low-certainty evidence), but may result in little to no difference inserious adverse eventsattributable to the drug (RR 1.04, 95% CI 0.76 to 1.42; 12 trials, 3317 participants; low-certainty evidence).

    AUTHORS' CONCLUSIONS: The low- to very low-certainty evidence means that we do not know whether favipiravir is efficacious in people with COVID-19 illness, irrespective of severity or admission status. Treatment with favipiravir may result in an overall increase in the incidence of adverse events but may not result in serious adverse events.

    Matched MeSH terms: Amides/therapeutic use
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links