MyMedR

Displaying publications 21 - 40 of 81 in total

Abstract:

Sort:

Prediction of work productivity outcomes by identifying critical risk factors among garment industry workers

Javed I, Md Dawal SZ, Nukman Y, Ahmad A

Int J Occup Saf Ergon, 2022 Dec;28(4):2238-2249.
PMID: 34556003 DOI: 10.1080/10803548.2021.1984673

Work productivity is one of the most important economic measures in the manufacturing industry. However, the physical, psychosocial and individual risk factors of an industrial work environment affect workers' physical or mental health, resulting in work productivity loss, absenteeism and presenteeism. Therefore, this study aims to identify the most critical risk factors and develop statistical models for predicting work productivity loss, absenteeism and presenteeism of garment industry workers. A sample of 224 sewing machine operators was taken for data collection through observation and self-reported studies. The results indicated that the average work productivity loss, absenteeism and presenteeism was 38.21, 2.35 and 37.23%, respectively. Finally, the statistical models of work productivity loss, absenteeism and presenteeism was developed using multiple linear regression with precision of 69.9, 53.7 and 84.0%, respectively. Hence, this study will help garment industries to improve their work productivity by taking initiatives based on the developed models.

Matched MeSH terms: Clothing
Spin-on-Glass (SOG) based insulator of stack coupled microcoils for MEMS sensors and actuators application

Jumril Yunas, Burhanuddin Yeop Majlis, Azrul Azlan Hamzah, Badariah Bais

Sains Malaysiana, 2014;43:289-293.

A comprehensive study on the spin-on-glass (SOG) based thin film insulating layer is presented. The SOG layer has been fabricated using simple MEMS technology which can play an important role as insulating layer of stack coupled microcoils. The fabrication process utilizes a simple, cost effective process technique as well as CMOS compatible resulting to a reproducible and good controlled process. It was observed that the spin speed and material preparation prior to the process affect to the thickness and surface quality of the layer. Through the annealing process at temperature 425oC in N2 atmospheric for 1 h, a 750 nm thin SOG layer with the surface roughness or the uniformity of about 1.5% can be achieved. Furthermore, the basic characteristics of the spiral coils, including the coupling characteristics and its parasitic capacitance were discussed in wide range of operating frequency. The results from this investigation showed a good prospect for the development of fully integrated planar magnetic field coupler and generator for sensing and actuating purposes.

Matched MeSH terms: Clothing
On the Choice of the Prior Distribution in the Bayesian Analysis for the Evaluation of Mini-Roundabouts as a Road Safety Measure

Kamarulzaman bin Ibrahim

Sains Malaysiana, 1996;25.

An integral art of the Bayesian approach which is not present in the classical approach is the prior distribution. Different researchers may have different level of prior knowledge regarding the parameter of interest before seeing the data. Sometimes different prior distributions can result in different decisions, as such investigations have to be careful in making the choice of the prior distribution. In this paper, we compare results from the Bayesian analyses based on three possible choices of the prior distributions, which are uniform prior, lognormal prior and an improper prior, in the evaluation of the effectiveness of mini-roundabouts. Data from five before and after studies into the effect of mini-roundabouts when replacing priority junctions are used. The effects of the different prior distributions are distinguishable from the analysis of an anamolous 'desk-drawer' study. The uniform and improper prior pull the estimated treatment effect away from one more than the lognormal prior. The results based on lognormal prior depict a less worst scenario of the ineffectiveness of mini-roundabouts and this may correspond to the deficiency in engineering design at only a few sites. Consequently, it is more appropriate to use the lognormal prior in the analysis of mini-roundabouts as a road safety measure.
Satu ciri yang penting dalam kaedah Bayesian yang tidak ada dalam kaedah klasik ialah taburan prior. Sebelum melihat data, mungkin setiap penyelidik mempunyai tahap pengetahuan prior yang berbeza berkenaan sesuatu parameter yang ingin dikaji. Kadang-kala taburan prior yang berlainan boleh menghasilkan keputusan yang berlainan. Oleh itu, pengkaji perlu berhati-hati dalam memilih taburan prior. Dalam kertas-kerja ini, kami bandingkan keputusan dari analisis Bayesian berdasarkan tiga pilihan taburan prior yang menasabah iaitu prior seragam, prior lognormal dan prior tak wajar untuk menilai keberkesanan bulatan mini. Data dari kajian-kajian sebelum dan selepas terhadap kesan mengantikan persimpangan dengan bulatan mini digunakan. Kesan taburan prior yang berlainan dapat dibezakan berasaskan keputusan analisis terhadap satu kajian 'laci-meja' yang ganjil. Prior seragam dan prior fak wajar felah menyebabkan anggaran nilai kesan rawatan melebihi satu lebih dari prior lognormal. Keputusan berasaskan prior lognormal ini menunjukkan senario yang kurang teruk tentang kurang berkesannya bulatan mini dan mungkin ini boleh dikaitkan dengan rekabentuk kejuruteraan yang tidak baik di beberapa tempat sahaja. Dengan itu, prior lognormal adalah lebih sesuai digunakan untuk menilai bulatan mini sebagai langkah keselamatan jalanraya.

Matched MeSH terms: Clothing
Glove-based approach to online signature verification

Kamel NS, Sayeed S, Ellis GA

IEEE Trans Pattern Anal Mach Intell, 2008 Jun;30(6):1109-13.
PMID: 18421114 DOI: 10.1109/TPAMI.2008.32

Utilizing the multiple degrees of freedom offered by the data glove for each finger and the hand, a novel on-line signature verification system using the Singular Value Decomposition (SVD) numerical tool for signature classification and verification is presented. The proposed technique is based on the Singular Value Decomposition in finding r singular vectors sensing the maximal energy of glove data matrix A, called principal subspace, so the effective dimensionality of A can be reduced. Having modeled the data glove signature through its r-principal subspace, signature authentication is performed by finding the angles between the different subspaces. A demonstration of the data glove is presented as an effective high-bandwidth data entry device for signature verification. This SVD-based signature verification technique is tested and its performance is shown to be able to recognize forgery signatures with a false acceptance rate of less than 1.2%.

Matched MeSH terms: Clothing*
Fulltext Chemical reaction and variable viscosity effect on mixed heat and mass transfer convection for Hiemenz flow over a porous wedge with heat radiation

Kandasamy, R., Azme, Hashim, I., Ismoen, M.

ASM Science Journal, 2008;2(1):23-33.
MyJurnal

The effect of chemical reaction and variable viscosity on mixed convection heat and mass transfer for Hiemenz flow over a porous wedge plate was studied in the presence of heat radiation. The wall of the wedge was embedded in a uniform Darcian porous medium to allow for possible fluid wall suction or injection and had a power-law variation of both the wall temperature and concentration. The fluid was assumed to be viscous and incompressible. Numerical calculations were carried out for different values of dimensionless parameters and an analysis of the results obtained showed that the flow field was influenced appreciably by the buoyancy ratio between species, thermal diffusion and suction/injection at wall surface. The effects of these major parameters on the transport behaviours were investigated methodically and typical results illustrated to reveal the tendency of the solutions. Representative results are presented for the velocity, temperature, and concentration distributions. Comparisons with previously published works were performed and excellent agreement between the results were obtained. It is predicted that this research might prove to be useful for study of the movement of oil or gas and water through the reservoir of an oil or gas field, in the migration of underground water, in filtration, and water purification processes.

Matched MeSH terms: Clothing
Fulltext Metal diagenesis and transport in coastal sediments around Penang Island , Malaysia

Khalik Wood, A., Zaharudin Ahmad, Noor Azhar Md. Shazili, Rosnan Yaakob, Carpenter, Roy

Journal of Nuclear and Related Technologies, 2004;2004(1):1-22.
MyJurnal

Spatial and temporal variations in concentrations of several metals and isotopes in sediment cores from around Penang Island, an area with economically important biological resources off the northwest coast of peninsular Malaysia, are reported. Because of a typical, monazite rich mineralogy in surrounding drainage basins, sedimentary metal enrichment factors relative to global average materials, enrichment factors (EFs) of ˃1.0 do not always indicate significant anthropogenic metal inputs. Because of extensive metal solubilization in the hot, organic carbon rich area, EFs of < 1.0 may be observed for several metals despite significant anthropogenic contributions. Comparison of metal-Al relationships in Penang area surface sediments with those in nearby and presumed uncontaminated Strait of Malacca sediments more accurately correct for atypical regional solubilization and mineralogical effects than comparison to global average materials. Such comparisons show concentrations of Cd, Cu, Pb, Ni, Cr, As, Sb, Zn and V have changed by less than a factor of two by anthropogenic discharges. Sedimentary concentration profiles of Pb, Zn and Cu, ratioed to Sc to normalize for variations in grain size and mineralogy, have subsurface maxima suggestive of modest and recently reduced anthropogenic inputs. Mn, U, As and Sb have Sc-normalized concentration profiles clearly affected by diagenetic processes. Sc-normalized profiles of Cr, Th, Ce and Sm show only small changes with depth, confirming insignificant anthropogenic inputs and undetectable postdepositional diagenetic mobility.
Excess ²¹⁰Pb activities and fluxes in Penang area sediments are limited by supply of this radionuclide, in contrast to sediments of both the northwestern U.S.A. and Amazon continental shelves, where they are limited by particle scavenging reactions.²¹⁰Pb activities in sediments of
the shallow, dynamic Penang area often show erratic or unconvincing changes with depth that
cannot be reliably modeled by assuming steady state, constant deposition rate of particles of
uniform chemistry, mineralogy and initial unsupported ²¹⁰Pb, and that mixing is limited to a
recognizable surface layer and resemble a diffusive process.

Matched MeSH terms: Clothing
Fulltext Occupationally Acquired Plasmodium knowlesi Malaria in Brunei Darussalam

Koh GJ, Ismail PK, Koh D

Saf Health Work, 2019 Mar;10(1):122-124.
PMID: 30949391 DOI: 10.1016/j.shaw.2018.09.002

Simian malaria is a zoonotic disease caused by Plasmodium knowlesi infection. The common natural reservoir of the parasite is the macaque monkey and the vector is the Anopheles mosquito. Human cases of P. knowlesi infection has been reported in all South East Asian countries in the last decade, and it is currently the most common type of malaria seen in Malaysia and Brunei. Between 2007-2017, 73 cases of P. knowlesi infection were notified and confirmed to the Ministry of Health in Brunei. Of these, 15 cases (21%) were documented as work-related, and 28 other cases (38%) were classified as probably related to work (due to incomplete history). The occupations of those with probable and confirmed work related infections were border patrol officers, Armed Forces and security personnel, Department of Forestry officers, boatmen and researchers. The remaining cases classified as most likely not related to work were possibly acquired via peri-domestic transmission. The risk of this zoonotic infection extends to tourists and overseas visitors who have to travel to the jungle in the course of their work. It can be minimised with the recommended use of prophylaxis for those going on duty into the jungles, application of mosquito/insect repellants, and use of repellant impregnated uniforms and bed nets in jungle camp sites.

Matched MeSH terms: Clothing
Fulltext High prevalence of methicillin-resistant Staphylococcus aureus (MRSA) on doctors' neckties

Koh KC, Husni S, Tan JE, Tan CW, Kunaseelan S, Nuriah S, et al.

Med J Malaysia, 2009 Sep;64(3):233-5.
PMID: 20527275 MyJurnal

We set out to investigate whether neckties worn by doctors are more likely to be contaminated with Methicillin resistant Staphylococcus aureus (MRSA) compared to neckties worn by preclinical medical undergraduates who have never been exposed to a hospital environment. We discovered that more than half (52%) of neckties worn by doctors were contaminated with Staphylococcus and out of these, 62% of them were identified as MRSA. In contrast, none of the student's ties were contaminated with MRSA. Due to the high prevalence of staphylococcus detected on doctors' neckties, we recommend that health care workers do not wear neckties.

Matched MeSH terms: Clothing*
Fulltext Influence of vitamin D binding protein polymorphism, demographics and lifestyle factors on vitamin D status of healthy Malaysian pregnant women

Lee SS, Ling KH, Tusimin M, Subramaniam R, Rahim KF, Loh SP

BMC Pregnancy Childbirth, 2020 Nov 23;20(1):714.
PMID: 33228578 DOI: 10.1186/s12884-020-03397-7

BACKGROUND: Vitamin D deficiency (VDD) has been related to vitamin D binding protein (GC) gene polymorphism, demographics and lifestyle factors in different populations. However, previous studies only focused on demographic and lifestyle factors or genetic factors alone. Therefore, this cross-sectional study aimed to assess the association between GC gene polymorphism, demographics and lifestyle factors with VDD among Malaysian pregnant women.
METHOD: Information on demographic characteristics, dietary vitamin D intake from supplement and food, time spent outdoors, skin type and clothing were collected using a questionnaire. Plasma total 25-hydroxyvitamin D (25OHD) levels were measured using an Ultra-High-Performance Liquid Chromatography (UHPLC). Maternal GC single nucleotide polymorphisms (SNPs) (rs4588 and rs7041) were determined using restriction fragment length polymorphism (RFLP) technique.
RESULTS: Results showed that 50.2% of pregnant women were vitamin D deficient (25OHD

Matched MeSH terms: Clothing
Waist belt and central obesity cause partial hiatus hernia and short-segment acid reflux in asymptomatic volunteers

Lee YY, Wirz AA, Whiting JG, Robertson EV, Smith D, Weir A, et al.

Gut, 2014 Jul;63(7):1053-60.
PMID: 24064007 DOI: 10.1136/gutjnl-2013-305803

OBJECTIVE: There is a high incidence of inflammation and metaplasia at the gastro-oesophageal junction (GOJ) in asymptomatic volunteers. Additionally, the majority of patients with GOJ adenocarcinomas have no history of reflux symptoms. We report the effects of waist belt and increased waist circumference (WC) on the physiology of the GOJ in asymptomatic volunteers.
DESIGN: 12 subjects with normal and 12 with increased WC, matched for age and gender were examined fasted and following a meal and with waist belts on and off. A magnet was clipped to the squamo-columnar junction (SCJ). Combined assembly of magnet-locator probe, 12-channel pH catheter and 36-channel manometer was passed.
RESULTS: The waist belt and increased WC were each associated with proximal displacement of SCJ within the diaphragmatic hiatus (relative to upper border of lower oesophageal sphincter (LOS), peak LOS pressure point and pressure inversion point, and PIP (all p<0.05). The magnitude of proximal migration of SCJ during transient LOS relaxations was reduced by 1.6-2.6 cm with belt on versus off (p=0.01) and in obese versus non-obese (p=0.04), consistent with its resting position being already proximally displaced. The waist belt, but not increased WC, was associated with increased LOS pressure (vs intragastric pressure) and movement of pH transition point closer to SCJ. At 5 cm above upper border LOS, the mean % time pH <4 was <4% in all studied groups. Acid exposure 0.5-1.5 cm above SCJ was increased, with versus without, belt (p=0.02) and was most marked in obese subjects with belt.
CONCLUSIONS: Our findings indicate that in asymptomatic volunteers, waist belt and central obesity cause partial hiatus herniation and short-segment acid reflux. This provides a plausible explanation for the high incidence of inflammation and metaplasia and occurrence of neoplasia at the GOJ in subjects without a history of reflux symptoms.

Matched MeSH terms: Clothing/adverse effects*
Fulltext A Rejang river rash

Lim JL

Malays Fam Physician, 2014;9(1):33-34.
PMID: 25606297 MyJurnal

A 30-year-old Iban woman presented to a rural primary healthcare clinic located along the Batang Rejang in Sarawak. She had a 2-day history of rash, which started over her trunk and later spread to her face and limbs. What started out as individual erythematous maculopapular spots later coalesced to form larger raised blotches. The rash was extremely pruritic and affected her sleep, and hence her visit. The rash was preceded by high grade, persistent fever that was temporarily relieved by paracetamol. She also complained of malaise, arthralgia and myalgia. Her appetite had been poor since the onset of the fever. She lived in a long house at the edge of the jungle. Although she did not have a history of going into the jungle to forage, she went regularly to the river to wash clothes. Clinically, she appeared lethargic and had bilateral conjunctival injection. Her left anterior cervical lymph nodes were palpable. There were erythematous macules measuring 5 to 15 mm distributed over her whole body but predominantly over the chest and abdominal region (Figure 1). An unusual skin lesion was discovered at the right hypochondriac region. This lesion resembled a cigarette burn with a necrotic centre (Figure 2). There was no evidence of hepato-splenomegaly. Examination of the other systems was unremarkable. On further questioning, the patient admitted being bitten by a ‘kutu babi’ or mite 3 days before the onset of her fever.

Matched MeSH terms: Clothing
Contactless Visualization of Latent Fingerprints on Nonporous Curved Surfaces of Circular Cross Section-A Statistical Evaluation on the Materials as Plane Mirror

Low WZ, Khoo BE, Abdullah AFLB

J Forensic Sci, 2018 Jul;63(4):1092-1098.
PMID: 29178492 DOI: 10.1111/1556-4029.13702

A new contactless technique for latent fingerprint visualization on nonporous curved surfaces of circular cross section was introduced by Low et al. (1). The technique utilizes a plane mirror to convey the light rays toward the inspected surfaces for latent fingerprint visualization. This research activity came up as an extension of the previous study which utilized an aluminum plate as the plane mirror to illuminate the inspected surfaces. Dulling spray was used to increase the diffuse component of the reflective aluminum plate. However, the amount of dulling spray will affect the uniformity of the illumination on the inspected curved surfaces. In this study, a study on the new materials for the plane mirror was carried out. Coated aluminum, opal, and ground glass diffusers were selected as the new materials. The performance of the new materials was compared to the aluminum based on the quality of the captured images on various nonporous cylindrical surfaces. A statistical approach known as randomized complete block design was used to design the experiment. The quality of the captured images was obtained using Spectral Image Validation and Verification. Two-way analysis of variance and Fisher's least significant difference test were used to analyze the quality of the images. From the results of the statistical analysis, coated aluminum has the best performance compared to aluminum, opal, and ground glass diffusers.

Matched MeSH terms: Clothing
Fulltext Attitude towards sex: study of secondary schoolchildren in Selangor state

Maha, A., Azhar, M. Z., Sherina, M. S., Sharmili, V., Rampal, L., Abdah, A., et al.

Malaysian Journal of Medicine and Health Sciences, 2010;6(1):33-61.
MyJurnal

Introduction: HIV/AIDS is one of the leading health problems worldwide. There is an increasing rate among the ages between 13 to 49 years old. School based intervention is an important component of community-based interventions for HIV/AIDS and is the best stage to promote abstinence which is best maintained among those not sexually experienced. Objectives: This study was carried out to determine attitude towards sex among secondary school children in Selangor state. Methods: A cross-sectional study design was used. Four out of nine districts in Selangor state were selected at random. Students were divided according to gender, academic performance (good or poor) with no behavioural problems
and students with evidence of behaviour problems (at risk). Results: Out of 149 students, the majority (56.4%) were females. The majority of students did not think sex should be discussed in depth and do not speak to parents, teachers, religious teachers, counselors, relatives, doctors or nurses but speak to friends regarding sex. More than half watch pornography. A significantly higher percentage of male students in the weak and at-risk group admit to thinking of intimacy (hugging and kissing) with the opposite gender. A higher number of these students would try sex out of curiosity, for fun, because it was difficult to say ‘no’ to and that they would like it. A significantly higher percentage will try sex because they did not want to hurt their girlfriends’ feeling by saying ‘no’. While the majority of students think intimacy will end in sex, a significantly higher percentage of male at-risk students think just talking with the opposite gender will end in sex. The majority of male students responded feeling attracted to the picture of a girl in sexy clothing but a significantly higher percentage of at-risk students also felt attracted to the picture of a girl properly attired. A significantly higher percentage of male at-risk students say parents do not say sex before marriage is wrong and a significantly higher percentage of
male students of weak and at-risk groups say girlfriends say sex before marriage is okay. A significantly higher percentage of weak and at-risk students speak to doctors regarding sex and think sex should be discussed in depth. Conclusion: Weak and at-risk male students appeared to have a more vulnerable attitude towards sex. This may predispose them to risky sexual behaviours leading to HIV/AIDS. Poor academic performance and behaviour problems may not be different as potential sexual risk predictors. The information obtained will be useful in designing intervention programmes in the prevention of HIV/AIDS.

Matched MeSH terms: Clothing
Definitions, attitudes, and management practices in relation to diarrhea during enteral nutrition: a survey of patients, nurses, and dietitians

Majid HA, Emery PW, Whelan K

Nutr Clin Pract, 2012 Apr;27(2):252-60.
PMID: 22223668 DOI: 10.1177/0884533611431986

Diarrhea is a common complication in patients receiving enteral nutrition (EN), and understanding this problem among patients and healthcare professionals is required. The aim of the study was to investigate patients', nurses', and dietitians' definitions of diarrhea during EN, the attitudes of nurses and patients toward it, and the management practices of nurses and dietitians in response to diarrhea during EN.

Matched MeSH terms: Clothing
Fulltext Family response to presume consent system on organ donation from a review of literature

Makmor Tumin, Khaled Tafran, Nurul Huda Mohd Satar

International e-Journal of Science, Medicine & Education, 2015;9(3):20-26.
MyJurnal

Most countries around the world have experienced a shortage in organs needed for transplantation. Organ donation performance is widely attributed to two important factors: the legislation and the role of the family. Thus, this literature review aims to examine the willingness of people for organ donation while highlighting the importance of having a presumed consent system.

Matched MeSH terms: Clothing
Fulltext Effects of Mg and Cu dopants on the properties of zinc oxide nanorod arrays

Malek, M.F., Mamat, M.H., Ismail, A.S., Mohamed, R., Salifairus, M.J., Khusaimi, Z., et al.

Science Letters, 2016;11(2):36-40.
MyJurnal

We had successfully synthesised Mg-doped zinc oxide (MZO) and Cudoped zinc oxide (CZO) nanorod arrays (NRAs) on Al-doped ZnO (ZAO)-coated glass substrates using immersion method and investigated their structural properties. With the incorporation of the Mg dopant, the length and crystallinity of MZO NRAs is higher compared to that of the CZO NRAs. The average optical transmittance of MZO NRAs was slightly lower than that of the CZO NRAs over the visible wavelength region. With the incorporation of the Cu dopant, the morphology of the CZO sample was slightly different from that of the MZO NRAs. The CZO NRAs present granular with small sphere shape. On the other hand, the MZO NRAs exhibit a hexagonal shape structure with a flat-top facet. Rods with a diameter of 58.9-96.7 nm were uniformly grown on the ZAO-coated glass substrate. This paper presents the growth behaviors of the MZO and CZO NRAs.

Matched MeSH terms: Clothing
Fulltext Body measurement using 3D handheld scanner

Mohamed Najib Salleh, Halim Mad Lazim, Hendrik Lamsali

Movement Health & Exercise, 2018;7(1):179-187.
MyJurnal

Body measurement is the first process that must be encountered before any
custom-made compression garment can be designed. The current practice of
obtaining the measurement is by traditional methods using tools like
measuring tape. However, this method is considered to be time-consuming
and usually not accurate. The most popular solution to the problem is by using
non-contact measurement. The development of the 3D whole body scanner
has made non-contact body measurement become a reality due to its capacity
to capture a vast amount of information. However, the cost to buy the whole
body scanner is quite expensive. Moreover, their sizes are also bulky which
make them less portable. Thus, a handheld body scanner provides a solution
to the problem. Despite that, current handheld scanner only provide image
and visualization aspect, but not the measurement aspect. This paper reports
the development of a method to acquire body data from a 3D handheld
scanner. In this new method, the point cloud of a body part was collected
using the handheld scanner. Then, the data was transformed into point
coordinates. Several processes were developed to filter the number of points
to allow for faster processing time and increasing the measurement accuracy.
In the first process, only points at specific height/layers are selected. In the
second process, the remaining points are rearranged according to their height
and angle. In the last process, the number of points is further reduced. In this
process, the number of points per layer is limited to 72 points. Results show
that the method can be used to determine body measurement.

Matched MeSH terms: Clothing
Transport properties and sensing responses of platinum nanoparticles/graphen structure fabricated by thermal annealing process

Mohammad Sarwan Mohd Sanif, Amgad Ahmed Ali, Lee MW, Lee HW, Chia Sheng DB, Abdul Manaf Hashim

Sains Malaysiana, 2017;46:1119-1924.

The effects of the annealing temperatures and thicknesses on the shapes, sizes and arrangement of platinum (Pt) nanoparticles (NPs) on graphene and their sensing performance for hydrogen (H2) detection were investigated. It shows strong dependency of the annealing temperatures and thicknesses on the properties of NPs. It was found that the proposed technique is able to form the NPs with good size controllability and uniformity even for thick deposited layer, thus eliminating the requirement of very thin layer of below 5 nm for the direct NP synthesis by evaporation or sputtering. The transport properties of Pt NPs/graphene structure and its sensing performance on H2 at room temperature under various H2 concentration were evaluated. The results showed an acceptable sensing response, indicating an innovative approach to fabricate Pt NPs embedded graphene for gas sensing application.

Matched MeSH terms: Clothing
Fulltext Catalytic gasification of empty fruit bunch for enhanced production of hydrogen rich fuel gas

Mohammed, M.A.A., Salmiaton, A., Wan Azlina, W.A.K.G., Mohamad Amran, M.S., Omar, R., Taufiq-Yap, Y.H., et al.

Pertanika Journal of Science & Technology, 2012;20(1):139-149.
MyJurnal

Oil palm is widely grown in Malaysia. There has been interest in the utilization of oil palm biomass for production of environmental friendly biofuels. The gasification of empty fruit bunches (EFB), a waste of the palm oil industry, was investigated in this study to effectively and economically convert low value and highly distribution solid biomass to a uniform gaseous mixture mainly hydrogen (H2). The effects of temperature, equivalence ratio (ER) and catalyst adding on the yields and distribution of hydrogen rich gas products were also investigated. The main gas species generated, as identified by GC, were H2, CO, CO2, CH4 and trace amounts of C2H4 and C2H6. With temperature increasing from 700 to 1000 °C, the total gas yield was enhanced greatly and reached the maximum value (~ 90 wt. % ) at 1000°C with a big portion of H2 (38.02 vol. %) and CO (36.36 vol. %). Equivalence ratio (ER) showed a significant influence on the upgrading of hydrogen production and product distribution. The optimum ER (0.25) was found to attain a higher H2 yield (27.42 vol. %) at 850°C. The effect of adding catalysts (Malaysian dolomite1, P1), Malaysian dolomite2 (GML), NaOH, NaCl, CaO, ZnO, NiO) as a primary catalyst on gas product yield was investigated, and it was found that adding dolomite showed the greatest effect with the maximum H2 yield achieved (28.18 vol.%) at 850°C.

Matched MeSH terms: Clothing
A fourth-order compact finite difference scheme for the goursat problem

Mohd Agos Salim Nasir, Ahmad Izani Md Ismail

Sains Malaysiana, 2013;42:341-346.

A high-order uniform Cartesian grid compact finite difference scheme for the Goursat problem is developed. The basic idea of high-order compact schemes is to find the compact approximations to the derivatives terms by differentiating centrally the governing equations. Our compact scheme will approximate the derivative terms by involving the higher terms and reducing the number of grid points. The compact finite difference scheme is given for general form of the Goursat problem in uniform domain and illustrates the performance by applying a linear problem. Numerical experiments have been conducted with the new scheme and encouraging results have been obtained. In this paper we present the compact finite difference scheme for the Goursat problem. With the aid of computational software the scheme was programmed for determining the relative errors of linear Goursat problem.

Matched MeSH terms: Clothing

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links