Displaying publications 21 - 40 of 340 in total

Abstract:
Sort:
  1. Stability-indicating micellar electrokinetic chromatography method for the analysis of sumatriptan succinate in pharmaceutical formulations
    Al Azzam KM, Saad B, Tat CY, Mat I, Aboul-Enein HY
    J Pharm Biomed Anal, 2011 Dec 15;56(5):937-43.
    PMID: 21873014 DOI: 10.1016/j.jpba.2011.08.007
    A micellar electrokinetic chromatography method for the determination of sumatriptan succinate in pharmaceutical formulations was developed. The effects of several factors such as pH, surfactant and buffer concentration, applied voltage, capillary temperature, and injection time were investigated. Separation took about 5 min using phenobarbital as internal standard. The separation was carried out in reversed polarity mode at 20 °C, 26 kV and using hydrodynamic injection for 10s. Separation was achieved using a bare fused-silica capillary 50 μm×40 cm and background electrolyte of 25 mM sodium dihydrogen phosphate-adjusted with concentrated phosphoric acid to pH 2.2, containing 125 mM sodium dodecyl sulfate and detection was at 226 nm. The method was validated with respect to linearity, limits of detection and quantification, accuracy, precision and selectivity. The calibration curve was linear over the range of 100-2000 μg mL(-1). The relative standard deviations of intra-day and inter-day precision for migration time, peak area, corrected peak area, ratio of corrected peak area and ratio of peak area were less than 0.68, 3.48, 3.28, 2.97 and 2.83% and 2.01, 5.50, 4.46, 4.92 and 4.07%, respectively. The proposed method was successfully applied to the determinations of the analyte in tablet. Forced degradation studies were conducted by introducing a sample of sumatriptan succinate standard solution to different forced degradation conditions using neutral (water), basic (0.1 M NaOH), acidic (0.1 M HCl), oxidative (10% H(2)O(2)) and photolytic (exposure to UV light at 254 nm for 2 h). It is concluded that the stability-indicating method for sumatriptan succinate can be used for the analysis of the drug in various samples.
    Matched MeSH terms: Reference Standards
  2. Fulltext Evaluation of maxillary anterior teeth and their relation to the golden proportion in Malaysian population
    Al-Marzok MI, Majeed KR, Ibrahim IK
    BMC Oral Health, 2013;13:9.
    PMID: 23347800 DOI: 10.1186/1472-6831-13-9
    The maxillary anterior teeth are important in achieving pleasing dental aesthetics. Various methods are used to measure the size and form of them, including the golden proportion between their perceived widths, and the width-to-height ratio, referred to as the golden standard. The purpose of this study was conducted to evaluate whether consistent relationships exist between tooth width and height of the clinical crown dimensions; and to investigate the occurrence of the golden proportion of the maxillary anterior teeth.
    Matched MeSH terms: Reference Standards
  3. Multi-residue analytical method for human pharmaceuticals and synthetic hormones in river water and sewage effluents by solid-phase extraction and liquid chromatography-tandem mass spectrometry
    Al-Odaini NA, Zakaria MP, Yaziz MI, Surif S
    J Chromatogr A, 2010 Oct 29;1217(44):6791-806.
    PMID: 20851398 DOI: 10.1016/j.chroma.2010.08.033
    Pollutants such as human pharmaceuticals and synthetic hormones that are not covered by environmental legislation have increasingly become important emerging aquatic contaminants. This paper reports the development of a sensitive and selective multi-residue method for simultaneous determination and quantification of 23 pharmaceuticals and synthetic hormones from different therapeutic classes in water samples. Target pharmaceuticals include anti-diabetic, antihypertensive, hypolipidemic agents, β2-adrenergic receptor agonist, antihistamine, analgesic and sex hormones. The developed method is based on solid phase extraction (SPE) followed by instrumental analysis using liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) with 30 min total run time. River water samples (150 mL) and (sewage treatment plant) STP effluents (100 mL) adjusted to pH 2, were loaded into MCX (3 cm(3), 60 mg) cartridge and eluted with four different reagents for maximum recovery. Quantification was achieved by using eight isotopically labeled internal standards (I.S.) that effectively correct for losses during sample preparation and matrix effects during LC-ESI-MS/MS analysis. Good recoveries higher than 70% were obtained for most of target analytes in all matrices. Method detection limit (MDL) ranged from 0.2 to 281 ng/L. The developed method was applied to determine the levels of target analytes in various samples, including river water and STP effluents. Among the tested emerging pollutants, chlorothiazide was found at the highest level, with concentrations reaching up to 865 ng/L in STP effluent, and 182 ng/L in river water.
    Matched MeSH terms: Reference Standards
  4. Fulltext Rapid detection of methicillin-resistant Staphylococcus aureus by a newly developed dry reagent-based polymerase chain reaction assay
    Al-Talib H, Yean CY, Al-Khateeb A, Hasan H, Ravichandran M
    J Microbiol Immunol Infect, 2014 Dec;47(6):484-90.
    PMID: 23927820 DOI: 10.1016/j.jmii.2013.06.004
    Methicillin-resistant Staphylococcus aureus (MRSA) is a major pathogen responsible for significant numbers of nosocomial and community-acquired infections worldwide. Molecular diagnosis for MRSA nasal carriers is increasingly important for rapid detection and screening of MRSA colonization because the conventional methods are time consuming and labor intensive. However, conventional polymerase chain reaction (PCR) tests still require cold-chain storage as well as trained personnel, which makes them unsuitable for rapid high-throughput analysis. The aim of this study was to develop a thermostabilized PCR assay for MRSA in a ready-to-use form that requires no cold chain.
    Matched MeSH terms: Reference Standards
  5. Fulltext Evaluation of antioxidant compounds, antioxidant activities, and mineral composition of 13 collected purslane (Portulaca oleracea L.) accessions
    Alam MA, Juraimi AS, Rafii MY, Abdul Hamid A, Aslani F, Hasan MM, et al.
    Biomed Res Int, 2014;2014:296063.
    PMID: 24579078 DOI: 10.1155/2014/296063
    The methanolic extracts of 13 accessions of purslane were analyzed for their total phenol content (TPC), total flavonoid contents (TFC), and total carotenoid contents (TCC) and antioxidant activity of extracts was screened using FRAP assay and DPPH radical scavenging methods. The TPC, TFC, and TCC ranged from 0.96 ± 0.04 to 9.12 ± 0.29 mg GAE/g DW, 0.13 ± 0.04 to 1.44 ± 0.08 mg RE/g DW, and 0.52 ± 0.06 to 5.64 ± 0.09 mg (β-carotene equivalent) BCE/g DW, respectively. The DPPH scavenging (IC50) activity varied between 2.52 ± 0.03 mg/mL and 3.29 ± 0.01 mg/mL and FRAP ranged from 7.39 ± 0.08 to 104.2 ± 6.34  μmol TE/g DW. Among all the measured micro- and macrominerals K content was the highest followed by N, Na, Ca, Mg, P, Fe, Zn, and Mn. The overall findings proved that ornamental purslane was richer in antioxidant properties, whereas common purslane possesses more mineral contents than ornamental ones.
    Matched MeSH terms: Reference Standards
  6. Fulltext Directionally-Enhanced Binary Multi-Objective Particle Swarm Optimisation for Load Balancing in Software Defined Networks
    Albowarab MH, Zakaria NA, Zainal Abidin Z
    Sensors (Basel), 2021 May 12;21(10).
    PMID: 34065920 DOI: 10.3390/s21103356
    Various aspects of task execution load balancing of Internet of Things (IoTs) networks can be optimised using intelligent algorithms provided by software-defined networking (SDN). These load balancing aspects include makespan, energy consumption, and execution cost. While past studies have evaluated load balancing from one or two aspects, none has explored the possibility of simultaneously optimising all aspects, namely, reliability, energy, cost, and execution time. For the purposes of load balancing, implementing multi-objective optimisation (MOO) based on meta-heuristic searching algorithms requires assurances that the solution space will be thoroughly explored. Optimising load balancing provides not only decision makers with optimised solutions but a rich set of candidate solutions to choose from. Therefore, the purposes of this study were (1) to propose a joint mathematical formulation to solve load balancing challenges in cloud computing and (2) to propose two multi-objective particle swarm optimisation (MP) models; distance angle multi-objective particle swarm optimization (DAMP) and angle multi-objective particle swarm optimization (AMP). Unlike existing models that only use crowding distance as a criterion for solution selection, our MP models probabilistically combine both crowding distance and crowding angle. More specifically, we only selected solutions that had more than a 0.5 probability of higher crowding distance and higher angular distribution. In addition, binary variants of the approaches were generated based on transfer function, and they were denoted by binary DAMP (BDAMP) and binary AMP (BAMP). After using MOO mathematical functions to compare our models, BDAMP and BAMP, with state of the standard models, BMP, BDMP and BPSO, they were tested using the proposed load balancing model. Both tests proved that our DAMP and AMP models were far superior to the state of the art standard models, MP, crowding distance multi-objective particle swarm optimisation (DMP), and PSO. Therefore, this study enables the incorporation of meta-heuristic in the management layer of cloud networks.
    Matched MeSH terms: Reference Standards
  7. Fulltext A Review of Actuation and Sensing Mechanisms in MEMS-Based Sensor Devices
    Algamili AS, Khir MHM, Dennis JO, Ahmed AY, Alabsi SS, Ba Hashwan SS, et al.
    Nanoscale Res Lett, 2021 Jan 26;16(1):16.
    PMID: 33496852 DOI: 10.1186/s11671-021-03481-7
    Over the last couple of decades, the advancement in Microelectromechanical System (MEMS) devices is highly demanded for integrating the economically miniaturized sensors with fabricating technology. A sensor is a system that detects and responds to multiple physical inputs and converting them into analogue or digital forms. The sensor transforms these variations into a form which can be utilized as a marker to monitor the device variable. MEMS exhibits excellent feasibility in miniaturization sensors due to its small dimension, low power consumption, superior performance, and, batch-fabrication. This article presents the recent developments in standard actuation and sensing mechanisms that can serve MEMS-based devices, which is expected to revolutionize almost many product categories in the current era. The featured principles of actuating, sensing mechanisms and real-life applications have also been discussed. Proper understanding of the actuating and sensing mechanisms for the MEMS-based devices can play a vital role in effective selection for novel and complex application design.
    Matched MeSH terms: Reference Standards
  8. Taxonomy development for term standardization in activity resulting from medication review processes: a Delphi study
    Alharthi MS, Scott S, Hughes C, Bond C, Hatah E, Bryant L, et al.
    Int J Pharm Pract, 2024 Mar 06;32(2):180-185.
    PMID: 38387608 DOI: 10.1093/ijpp/riae002
    BACKGROUND: Medication review (MR) is the systematic assessment of a patient's medications for safety and effectiveness by a healthcare professional. The language used to describe MR activity, such as stopped medicine and increased dose, should be consistent across studies to assist researchers compare how different services operate and identify their mechanism of impact.

    AIM: To develop an international taxonomy of standardized terms and activity definitions related to medication reviews.

    METHOD: This was a three-stage Delphi-based consensus study with international medication review experts. A systematic review provided MR activity terms for the survey. Experts rated their consensus on each activity term and its definition on a Likert scale and provided written feedback. The consensus was 75% panel agreement. At each stage, consensus elements were retained, and feedback was used to revise definitions.

    RESULTS: Seven experts were recruited for the study (response rate 15.2%) from four countries: the United Kingdom (n = 4), New Zealand (n = 1), Australia (n = 1), and Malaysia (n = 1). The following terms achieved consensus: the term Medication as a descriptor for MR terms; discontinue medication, start medication, dose increase, dose decrease, dosage form change, and medication safety and efficacy monitor to describe MR activity; Educate to describe the delivery of healthcare professionals and patients/carers education.

    CONCLUSION: Standardized medication review activity terms and definitions have been selected for universal adoption in all future MR research to facilitate a meaningful comparison of process evaluations within different settings.

    Matched MeSH terms: Reference Standards
  9. Fulltext Development of a valid and reliable software customization model for SaaS quality through iterative method: perspectives from academia
    Ali AQ, Md Sultan AB, Abd Ghani AA, Zulzalil H
    PeerJ Comput Sci, 2020;6:e294.
    PMID: 33816945 DOI: 10.7717/peerj-cs.294
    Despite the benefits of standardization, the customization of Software as a Service (SaaS) application is also essential because of the many unique requirements of customers. This study, therefore, focuses on the development of a valid and reliable software customization model for SaaS quality that consists of (1) generic software customization types and a list of common practices for each customization type in the SaaS multi-tenant context, and (2) key quality attributes of SaaS applications associated with customization. The study was divided into three phases: the conceptualization of the model, analysis of its validity using SaaS academic-derived expertise, and evaluation of its reliability by submitting it to an internal consistency reliability test conducted by software-engineer researchers. The model was initially devised based on six customization approaches, 46 customization practices, and 13 quality attributes in the SaaS multi-tenant context. Subsequently, its content was validated over two rounds of testing after which one approach and 14 practices were removed and 20 practices were reformulated. The internal consistency reliability study was thereafter conducted by 34 software engineer researchers. All constructs of the content-validated model were found to be reliable in this study. The final version of the model consists of 6 constructs and 44 items. These six constructs and their associated items are as follows: (1) Configuration (eight items), (2) Composition (four items), (3) Extension (six items), 4) Integration (eight items), (5) Modification (five items), and (6) SaaS quality (13 items). The results of the study may contribute to enhancing the capability of empirically analyzing the impact of software customization on SaaS quality by benefiting from all resultant constructs and items.
    Matched MeSH terms: Reference Standards
  10. Fulltext The spiritual care competence scale: a confirmatory study of the Malay language version
    Ali H Abusafia, Zakira Mamat Mohamed, Nur Syahmina Rasudin, Mujahid Bakar, Rohani Ismail
    Malaysian Journal of Medicine and Health Sciences, 2020;16(105):9-0.
    MyJurnal
    Introduction: Measuring the competence of nurses in spiritual care and their ability to provide spiritual care is im- portant and check the validity and reliability of the instrument is recommended in the literature. Thus, the aim of this study was to validate the translation of the spiritual care competence (SCC) scale to the Malay language version. Methods: Data were collected from staff nurses at the hospital Universiti Sains Malaysia. A total of 270 nurses par- ticipated in the study (female: 92.6%, male: 7.4%), with the mean age of 35 years (SD = 8.4). Spiritual care compe- tence was assessed with the 27-item SCC-M. Standard forward–backward translation was performed to translate the English version of the SCC into the Malay version (SCC-M). All the participants completed the SCC-M. Results: The initial measurement models tested (6-factor models) did not result in a good fit to the data. Subsequent investigation of the confirmatory factor analysis (CFA) results recommended some modifications, including adding correlations between the item residuals within the same latent variable. These modifications resulted in acceptable fit indices for the 6-factor model (RMSEA = .050, CFI = .900, TLI = .885, SRMR = .065). The final measurement models comprised all 27 SCC-M items, which had significant factor loadings of more than .40. The composite reliability was .696-.853 for 6-factors model. These results suggest that the subscales in 6-factor SCC-M model are unique, the factors do not overlap much, and each factor explains different variance than the other factors. Conclusions: The translated version of the SCC-M was valid and reliable for assessing the level of spiritual care competence among hospital nurses in Malaysia.
    Matched MeSH terms: Reference Standards
  11. Development and Standardization of Moringa oleifera Leaves as a Natural Dietary Supplement
    Ali MA, Yusof YA, Chin NL, Ibrahim MN, Muneer S
    J Diet Suppl, 2019;16(1):66-85.
    PMID: 29469600 DOI: 10.1080/19390211.2018.1429517
    Moringa oleifera leaves were selected as a model due to their hundreds of health benefits. On the other hand, the powder of these leaves has exhibited poor flowability, low tensile strength, bitter taste, poor dissolution rate, and lack of information regarding dosage. These are the common hurdles and limitations in the adaptation of herbal-based medications. Therefore, a comprehensive study was planned to introduce herbal-based medicines into mainstream medicines by standardization according to the U.S. Food and Drug Administration (FDA) and international pharmaceutical standards. A Simplex Lattice Design (SLD) of Design Expert 8.0 software was used to formulate different concentrations of superdisintegrant, binder/diluent, and sweeteners. An Instron Universal Testing machine coupled with a 13 mm stainless cylindrical die was used to manufacture tablets by means of direct compression method at 20 kN applied force. Therefore, selection of excipients was made on the basis of their tensile strength, flowability, and taste-masking properties. Optimum formulation was tested on rabbits for toxicity and growth rate. All formulated tablets were evaluated on standard parameters for orally disintegrating tablets described by the Food and Drug Authority (U.S.). The optimum formulation fulfills all standard parameters such as hardness, disintegration time, friability, and dissolution rate. The present formulation showed no toxicity when tested on rabbits. The present study provides a fundamental understanding of the tableting characteristics of natural medicines. The present study provides information that will help to overcome the challenges.
    Matched MeSH terms: Reference Standards
  12. Fulltext The antibacterial effects of vitamin D3 against mutans streptococci: an in vitro study
    Almoudi MMM, Hussein AS, Abu Hassan MI, Al-Talib H, Khan HBSG, Nazli SAB, et al.
    Eur Oral Res, 2021 Jan 04;55(1):8-15.
    PMID: 33937756 DOI: 10.26650/eor.20210119
    Purpose: This study aims to evaluate the antimicrobial effects of the cholecalciferol vitamin D3 against Streptococcus sobrinus (Strep. sobrinus) and Streptococcus mutans (Strep. mutans) bacteria in vitro that is considered the main causative bacteria in dental caries development.

    Materials and methods: The antimicrobial effects of vitamin D3 were evaluated against Strep. sobrinus and Strep mutans using the agar disc diffusion method. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of vitamin D3 were determined using a microdilution method following the guidelines by the Clinical Laboratory Standards Institute (CLSI). Scanning electron microscope (SEM) was used to evaluate the morphological changes of bacterial cells following exposure to vitamin D3.

    Results: Strep. sobrinus was more sensitive to vitamin D3 compared to Strep. mutans bacteria. The MIC values of vitamin D3 against Strep. sobrinus and Strep. mutans were 60 μg/ mL and 250 μg/mL respectively whereas the MBC values were 120 μg/mL and 500 μg/mL, respectively. Moreover, significant changes in the bacterial morphology were observed in treated bacterial cells with vitamin D3 as compared to the untreated control bacteria using SEM.

    Conclusion: These findings suggested that vitamin D3 has excellent antimicrobial effects against Strep. sobrinus and Strep. mutans and may be considered as a promising compound in the prevention of dental caries in the future. Further research is recommended to elucidate the mechanism of vitamin D3 on these bacteria.

    Matched MeSH terms: Reference Standards
  13. Tailor-made Ge-doped silica-glass for clinical diagnostic X-ray dosimetry
    Alyahyawi A, Jupp T, Alkhorayef M, Bradley DA
    Appl Radiat Isot, 2018 Aug;138:45-49.
    PMID: 28780202 DOI: 10.1016/j.apradiso.2017.07.011
    In the modern clinical practice of diagnostic radiology there is a growing demand for radiation dosimetry, it also being recognized that with increasing use of X-ray examinations additional population dose will result, accompanied by an additional albeit low potential for genetic consequences. At the doses typical of diagnostic radiology there is also a low statistical risk for cancer induction; in adhering to best practice, to be also implied is a low but non-negligible potential for deterministic sensitive organ responses, including in regard to the skin and eyes. Risk reduction is important, in line with the principle of ALARP, both in regard to staff and patients alike; for the latter modern practice is usually guided by Dose Reference Levels (DRL) while for the former and members of the public, legislated controls (supported by safe working practices) pertain. As such, effective, reliable and accurate means of dosimetry are required in support of these actions. Recent studies have shown that Ge-doped-silica glass fibres offer several advantages over the well-established phosphor-based TL dosimeters (TLD), including excellent sensitivity at diagnostic doses as demonstrated herein, low fading, good reproducibility and re-usability, as well as representing a water impervious, robust dosimetric system. In addition, these silica-based fibres show good linearity over a wide dynamic range of dose and dose-rate and are directionally independent. In the present study, we investigate tailor made doped-silica glass thermoluminescence (TL) for applications in medical diagnostic imaging dosimetry. The aim is to develop a dosimeter of sensitivity greater than that of the commonly used LiF (Mg,Ti) phosphor. We examine the ability of such doped glass media to detect the typically low levels of radiation in diagnostic applications (from fractions of a mGy through to several mGy or more), including, mammography and dental radiology, use being made of x-ray tubes located at the Royal Surrey County Hospital. We further examine dose-linearity, energy response and fading.
    Matched MeSH terms: Reference Standards
  14. Lead contamination in Eugenia dyeriana herbal preparations from different commercial sources in Malaysia
    Ang HH
    Food Chem Toxicol, 2008 Jun;46(6):1969-75.
    PMID: 18328612 DOI: 10.1016/j.fct.2008.01.037
    The Drug Control Authority (DCA) of Malaysia implemented the phase three registration of traditional medicines on 1 January, 1992. A total of 100 products in various pharmaceutical dosage forms of a herbal preparation, containing Eugenia dyeriana, either single or combined preparations (more than one medicinal plant), were analyzed for the presence of lead contamination, using atomic absorption spectrophotometry. These samples were bought from different commercial sources in the Malaysian market, after performing a simple random sampling. Results showed that 22% of the above products failed to comply with the quality requirement for traditional medicines in Malaysia. Although this study showed that 78% of the products fully complied with the quality requirement for traditional medicines in Malaysia pertaining to lead, however, they cannot be assumed safe from lead contamination because of batch-to-batch inconsistency.
    Matched MeSH terms: Reference Standards
  15. Determination of mercury by cold vapor atomic absorption spectrophotometer in Tongkat Ali preparations obtained in Malaysia
    Ang HH, Lee EL, Cheang HS
    Int J Toxicol, 2004 Jan-Feb;23(1):65-71.
    PMID: 15162849 DOI: 10.1080/10915810490269654
    The DCA (Drug Control Authority), Malaysia, has implemented the phase 3 registration of traditional medicines on 1 January 1992, with special emphasis on the quality, efficacy, and safety (including the presence of heavy metals) in all pharmaceutical dosage forms of traditional medicine preparations. As such, a total of 100 products in various pharmaceutical dosage forms of a herbal preparation, containing Tongkat Ali, were analyzed for mercury content using cold vapor atomic absorption spectrophotometer. Results showed that 36% of the above products possessed 0.52 to 5.30 ppm of mercury and, therefore, do not comply with the quality requirement for traditional medicines in Malaysia. Out of these 36 products, 5 products that possessed 1.05 to 4.41 ppm of mercury were in fact have already registered with the DCA, Malaysia. However, the rest of the products that contain 0.52 to 5.30 ppm of mercury still have not registered with the DCA, Malaysia. Although this study showed that only 64% of the products complied with the quality requirement for traditional medicines in Malaysia pertaining to mercury, they cannot be assumed safe from mercury contamination because of batch-to-batch inconsistency.
    Matched MeSH terms: Reference Standards
  16. Pivotal Role of Fyn Kinase in Parkinson's Disease and Levodopa-Induced Dyskinesia: a Novel Therapeutic Target?
    Angelopoulou E, Paudel YN, Julian T, Shaikh MF, Piperi C
    Mol Neurobiol, 2021 Apr;58(4):1372-1391.
    PMID: 33175322 DOI: 10.1007/s12035-020-02201-z
    The exact etiology of Parkinson's disease (PD) remains obscure, although many cellular mechanisms including α-synuclein aggregation, oxidative damage, excessive neuroinflammation, and dopaminergic neuronal apoptosis are implicated in its pathogenesis. There is still no disease-modifying treatment for PD and the gold standard therapy, chronic use of levodopa is usually accompanied by severe side effects, mainly levodopa-induced dyskinesia (LID). Hence, the elucidation of the precise underlying molecular mechanisms is of paramount importance. Fyn is a tyrosine phospho-transferase of the Src family nonreceptor kinases that is highly implicated in immune regulation, cell proliferation and normal brain development. Accumulating preclinical evidence highlights the emerging role of Fyn in key aspects of PD and LID pathogenesis: it may regulate α-synuclein phosphorylation, oxidative stress-induced dopaminergic neuronal death, enhanced neuroinflammation and glutamate excitotoxicity by mediating key signaling pathways, such as BDNF/TrkB, PKCδ, MAPK, AMPK, NF-κB, Nrf2, and NMDAR axes. These findings suggest that therapeutic targeting of Fyn or Fyn-related pathways may represent a novel approach in PD treatment. Saracatinib, a nonselective Fyn inhibitor, has already been tested in clinical trials for Alzheimer's disease, and novel selective Fyn inhibitors are under investigation. In this comprehensive review, we discuss recent evidence on the role of Fyn in the pathogenesis of PD and LID and provide insights on additional Fyn-related molecular mechanisms to be explored in PD and LID pathology that could aid in the development of future Fyn-targeted therapeutic approaches.
    Matched MeSH terms: Reference Standards
  17. Correlation of Arsenic Levels in Smokeless Tobacco Products and Biological Samples of Oral Cancer Patients and Control Consumers
    Arain SS, Kazi TG, Afridi HI, Talpur FN, Kazi AG, Brahman KD, et al.
    Biol Trace Elem Res, 2015 Dec;168(2):287-95.
    PMID: 25975948 DOI: 10.1007/s12011-015-0355-y
    It has been extensively reported that chewing of smokeless tobacco (SLT) can lead to cancers of oral cavity. In present study, the relationship between arsenic (As) exposure via chewing/inhaling different SLT products in oral cancer patients have or/not consumed SLT products was studied. The As in different types of SLT products (gutkha, mainpuri, and snuff) and biological (scalp hair and blood) samples of different types of oral cancer patients and controls were analyzed. Both controls and oral cancer patients have same age group (ranged 30-60 years), socio-economic status, localities, and dietary habits. The concentrations of As in SLT products and biological samples were measured by electrothermal atomic absorption spectrophotometer after microwave-assisted acid digestion. The validity and accuracy of the methodology were checked by certified reference materials. The resulted data of present study indicates that the concentration of As was significantly higher in scalp hair and blood samples of oral cancer patients than those of controls (p<0.001). It was also observed that the values of As were two- to threefolds higher in biological samples of controls subjects, consuming SLT products as compared to those have none of these habits (p>0.01). The intake of As via consuming different SLT may have synergistic effects, in addition to other risk factors associated with oral cancer.
    Matched MeSH terms: Reference Standards
  18. The Impact of Antimicrobial Stewardship Program on Injudicious Use of Cefuroxime
    Arulappen AL, Danial M, Haron N, Hau LC, Khan AH
    Front Pharmacol, 2020;11:565818.
    PMID: 33664664 DOI: 10.3389/fphar.2020.565818
    Antimicrobial stewardship (AMS) program promotes the judicious use of antimicrobials. Hence, this study was conducted to analyze the impact of stewardship on the prescribing pattern of cefuroxime injection among the surgeons as perioperative antimicrobial prophylaxis (PAP). This study was conducted retrospectively in Malaysia. Various outcomes were measured including cefuroxime usage, compliance with the guidelines, surgical site infections, and cost savings. A total of 1,601 patients were recruited in the study. In terms of usage, the total defined daily dose (DDD) prior to the intervention was 202 DDD/100 procedures compared to that after intervention which was 144 DDD/100 procedures (p < 0.05). On the other hand, the excessively long administration of PAP dropped from 94.4 to 30.3% (p < 0.001). Focusing on the compliance with the newly developed local guidelines, it has increased from 53 to 94.3% after the interventions were made (p < 0.001), whereas the rate of surgical site infections was reduced from 17.0 to 9.0%. The cost of antibiotic being used has significantly reduced after the study intervention (p = 0.007). The quality of PAP directly impacts the antimicrobial usage, the surgical site infections, and the total cost involved. Thus, it is crucial to maintain the standard of PAP at all times in healthcare settings.
    Matched MeSH terms: Reference Standards
  19. Fulltext Evaluation and Comparison of Trachyspermum ammi Seed Extract for Its Anti-inflammatory Effect
    Aslam A, Nokhala A, Peerzada S, Ahmed S, Khan T, Siddiqui MJ
    J Pharm Bioallied Sci, 2020 Nov;12(Suppl 2):S777-S780.
    PMID: 33828377 DOI: 10.4103/jpbs.JPBS_243_19
    Aims and Objectives: The present study was aimed to evaluate the antiinflammatory effect of different seed extracts of Trachyspermum ammi at different doses.

    Materials and Methods: Three different seed extracts were prepared through Soxhlet extraction method by using n-hexane, chloroform and methanol solvents. Acute toxicity test performed at dose of 400 mg/ kg, 800 mg/kg, 1600 mg/kg and 3200 mg/kg. Two different strengths of seed extracts (minimum therapeutic dose of 500 mg/kg and maximum therapeutic dose of 1000 mg/kg) were given to Wistar rats to measure anti-inflammatory activity through Carrageenan induced paw edema method.

    Results: The standard drug diclofenac sodium was (percentage of inhibition of paw edema 29.68%) more effective as compared to test drug. When efficacy of all extracts compared with each other, n-hexane extract showed more anti-inflammatory effect (percentage inhibition of paw edema 22.21%) at maximum effective dose 1000 mg/kg.

    Conclusion: Seed extracts of T. ammi showed anti-inflammatory activity by potentiating the neurotransmission of GABA and also by repression glutamate receptor.

    Matched MeSH terms: Reference Standards
  20. Fulltext SkytiderTM - overcomes the difficultness of installing and lowering the outdoor bunting
    Asrizam Esam, Mohammad Hisham Omar, Muhammad Izzat Nor Adzmi, Mohd Mas’Ataillah Ismail, Norliyana Kamarudin, Hafliza Hussin, et al.
    Jurnal Inovasi Malaysia, 2019;2(2):71-92.
    MyJurnal
    Bunting is a medium to promote advertisements or programs that are widely used in Universiti Putra Malaysia in conjunction with the programs. There are two types of bunting that are commonly used; indoor and outdoor bunting. Outdoor bunting is a bunting that is installed outside of a building and it is usually installed at the street lamp poles, fence or at dedicated space. In UPM, outdoor buntings usually installed at the street lamp poles, around the campus. Issues faced by staff when installing and uninstalling the outdoor buntings are; method used, number of staff needed, time consuming and securities issues. All these factors lead UPM to hire external contractor for installing the outdoor buntings. These issues are also faced by other universities/institutions and external contractors. Several initiatives have been identified in order to mitigate this issues including the implementation of ‘Program Bebas Dawai’, an improvement of Standard Operating Procedure for bunting installation and creation of a new innovation called SkytiderTM. SkytiderTM is an installation tool for outdoor buntings that will expedite method without using ladder, minimize time, improve security measures and save costs by hiring less external contractor. SkytiderTM protected under industrial design, trademark and copyright protection. SkytiderTM is widely used in Serdang Campus, Selangor, Bintulu, Sarawak and Port Dickson, Negeri Sembilan.
    Matched MeSH terms: Reference Standards
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links