Displaying publications 21 - 40 of 160 in total

Abstract:
Sort:
  1. A novel chitosan-alginate@Fe/Mn mixed oxide nanocomposite for highly efficient removal of Cr (VI) from wastewater: Experiment and adsorption mechanism
    Alqarni LS, Algethami JS, El Kaim Billah R, Alorabi AQ, Alnaam YA, Algethami FK, et al.
    Int J Biol Macromol, 2024 Apr;263(Pt 2):129989.
    PMID: 38354916 DOI: 10.1016/j.ijbiomac.2024.129989
    In this study, the synthesis and experimental theoretical evaluation of a new chitosan/alginate/hydrozyapatite nanocomposite doped with Mn2 and Fe2O3 for Cr removal was reported. The physicochemical properties of the obtained materials were analyzed using the following methods: SEM-EDX, XRD, FTIR, XPS, pH drift measurements, and thermal analysis. The adsorption properties were estimated based on equilibrium and adsorption kinetics measurements. The Langmuir, Freundlich and Temkin isotherms were applied to analyze the equilibrium data. The thermodynamic analysis of adsorption isotherms was performed. A number of equations and kinetic models were used to describe the adsorption rate data, including pseudo-first (PFOE) and pseudo-second (PSOE) order kinetic equations. The obtained test results show that the synthesized biomaterial, compared to pure chitosan, is characterized by greater resistance to high temperatures. Moreover, this biomaterial had excellent adsorption properties. For the adsorption of Cr (VI), the equilibrium state was reached after 120 min, and the sorption capacity was 455.9 mg/g. In addition, DFT calculations and NCI analyses were performed to get more light on the adsorption mechanism of Cr (VI) on the prepared biocomposite.
    Matched MeSH terms: Alginates/chemistry
  2. Core-shell alginate-ghatti gum modified montmorillonite composite matrices for stomach-specific flurbiprofen delivery
    Bera H, Ippagunta SR, Kumar S, Vangala P
    Mater Sci Eng C Mater Biol Appl, 2017 Jul 01;76:715-726.
    PMID: 28482582 DOI: 10.1016/j.msec.2017.03.074
    Novel alginate-arabic gum (AG) gel membrane coated alginate-ghatti gum (GG) modified montmorillonite (MMT) composite matrices were developed for intragastric flurbiprofen (FLU) delivery by combining floating and mucoadhesion mechanisms. The clay-biopolymer composite matrices containing FLU as core were accomplished by ionic-gelation technique. Effects of polymer-blend (alginate:GG) ratios and crosslinker (CaCl2) concentrations on drug entrapment efficiency (DEE, %) and cumulative drug release after 8h (Q8h, %) were studied to optimize the core matrices by a 32factorial design. The optimized matrices (F-O) demonstrated DEE of 91.69±1.43% and Q8hof 74.96±1.56% with minimum errors in prediction. The alginate-AG gel membrane enveloped optimized matrices (F-O, coated) exhibited superior buoyancy, better ex vivo mucoadhesion and slower drug release rate. The drug release profile of FLU-loaded uncoated and coated optimized matrices was best fitted in Korsmeyer-Peppas model with anomalous diffusion and case-II transport driven mechanism, respectively. The uncoated and coated matrices containing FLU were also characterized for drug-excipients compatibility, drug crystallinity, thermal behaviour and surface morphology. Thus, the newly developed alginate-AG gel membrane coated alginate-GG modified MMT composite matrices are appropriate for intragastric delivery of FLU over an extended period of time with improved therapeutic benefits.
    Matched MeSH terms: Alginates
  3. Advanced Dome cellulose/alginate/chitosan composite matrix design with gastric and intestinal co-targeting capacities
    Razali S, Bose A, Benetti C, Chong PW, Miller M, Colombo P, et al.
    Int J Pharm, 2022 Nov 25;628:122226.
    PMID: 36191818 DOI: 10.1016/j.ijpharm.2022.122226
    Dome matrix was designed with gastric and intestinal targeting capacities using melatonin and caffeine as model drugs, and alginate, chitosan and cellulose as composite materials. The melatonin, caffeine and intermediate hydroxypropylmethylcelluose-based dispersible modules were prepared through compaction. Caffeine piled module was capped at both ends with melatonin void modules via intermediate dispersible modules into Dome matrix. Dispersion of intermediate module detached melatonin module from Dome matrix and had it floated in stomach providing a more complete melatonin release due to favorable pH-pKa relationship of dissolution medium and drug. With reference to the caffeine module, the detachment of melatonin module facilitated its gastrointestinal transit as a reduced size matrix, with majority of caffeine delivered in colon. The dual site-targeted and -release Dome matrix is applicable as reference oral carrier for pharmaceutical, nutraceutical, functional food and veterinary medicine where a complex formulation and performancein vivoare required.
    Matched MeSH terms: Alginates
  4. Entrapment of porous cross-linked enzyme aggregates of maltogenic amylase from Bacillus lehensis G1 into calcium alginate for maltooligosaccharides synthesis
    Nawawi NN, Hashim Z, Rahman RA, Murad AMA, Bakar FDA, Illias RM
    Int J Biol Macromol, 2020 May 01;150:80-89.
    PMID: 32035147 DOI: 10.1016/j.ijbiomac.2020.02.032
    Maltooligosaccharides (MOSs) are emerging oligosaccharides in food-based applications and can be synthesized through the enzymatic synthesis of maltogenic amylase from Bacillus lehensis G1 (Mag1). However, the lack of enzyme stability makes this approach unrealistic for industrial applications. The formation of cross-linked enzyme aggregates (CLEAs) is a promising tool for improving enzyme stability, and the substrate accessibility problem of CLEA formation was overcome by the addition of porous agents to generate porous CLEAs (p-CLEAs). However, p-CLEAs exhibited high enzyme leaching and low solvent tolerance. To address these problems, p-CLEAs of Mag1 (Mag1-p-CLEAs) were entrapped in calcium alginate beads (CA). Mag1-p-CLEAs-CA prepared with 2.5% (w/v) sodium alginate and 0.6% (w/v) calcium chloride yielded 53.16% (17.0 U/mg) activity and showed a lower deactivation rate and longer half-life than those of entrapped free Mag1 (Mag1-CA) and entrapped non-porous Mag1-CLEAs (Mag1-CLEAs-CA). Moreover, Mag1-p-CLEAs-CA exhibited low enzyme leaching and high tolerance in various solvents compared to Mag1-p-CLEAs. A kinetic study revealed that Mag1-p-CLEAs-CA exhibited relatively high affinity towards beta-cyclodextrin (β-CD) (Km = 0.62 mM). MOSs (300 mg/g) were synthesized by Mag1-p-CLEAs-CA at 50 °C. Finally, the reusability of Mag1-p-CLEAs-CA makes them as a potential biocatalyst for the continuous synthesis of MOSs.
    Matched MeSH terms: Alginates/metabolism*; Alginates/chemistry
  5. Fulltext Marine algae as a potential source for anti-obesity agents
    Chu WL, Phang SM
    Mar Drugs, 2016 Dec 07;14(12).
    PMID: 27941599 DOI: 10.3390/md14120222
    Obesity is a major epidemic that poses a worldwide threat to human health, as it is also associated with metabolic syndrome, type 2 diabetes and cardiovascular disease. Therapeutic intervention through weight loss drugs, accompanied by diet and exercise, is one of the options for the treatment and management of obesity. However, the only approved anti-obesity drug currently available in the market is orlistat, a synthetic inhibitor of pancreatic lipase. Other anti-obesity drugs are still being evaluated at different stages of clinical trials, while some have been withdrawn due to their severe adverse effects. Thus, there is a need to look for new anti-obesity agents, especially from biological sources. Marine algae, especially seaweeds are a promising source of anti-obesity agents. Four major bioactive compounds from seaweeds which have the potential as anti-obesity agents are fucoxanthin, alginates, fucoidans and phlorotannins. The anti-obesity effects of such compounds are due to several mechanisms, which include the inhibition of lipid absorption and metabolism (e.g., fucoxanthin and fucoidans), effect on satiety feeling (e.g., alginates), and inhibition of adipocyte differentiation (e.g., fucoxanthin). Further studies, especially testing bioactive compounds in long-term human trials are required before any new anti-obesity drugs based on algal products can be developed.
    Matched MeSH terms: Alginates/pharmacology; Alginates/chemistry
  6. Fulltext Polysaccharide-based hydrogels for atopic dermatitis management: A review
    Rao H, Tan JBL
    Carbohydr Polym, 2025 Feb 01;349(Pt B):122966.
    PMID: 39638516 DOI: 10.1016/j.carbpol.2024.122966
    Atopic dermatitis (AD) is the most common form of eczema and the most burdensome skin disease globally, affecting nearly 223 million. A major AD predisposition is genetic susceptibility, affecting skin barrier integrity and cell-mediated immunity. Manifesting as red, dry, and itchy skin, basic treatment involves skin hydration with emollients. Despite their effectiveness, poor patient compliance remains a major drawback. In severe cases, medicated emollients are used, but carry risks, including skin thinning, and immunosuppression. Hence, hydrogels have emerged as a promising alternative for AD management based on their ability to improve skin hydration, attributed to their hydrophilicity and high water retention capacity. Moreover, researchers have loaded hydrogels with various compounds for AD management; they also hold the potential to reduce systemic side effects of commercial drugs by enhancing dermal retention. Hydrogels address the challenges of patient compliance based on their non-greasy texture and reduced application frequency. Their appeal also stems from their versatility, as they can be fabricated from varying polymers. Due to their abundance, this review focuses on polysaccharides including alginate, cellulose, chitosan, and hyaluronic acid, which are preferred for fabricating natural and modified natural hydrogels for AD. It also briefly explores hydrogel application methods and key AD models.
    Matched MeSH terms: Alginates/therapeutic use; Alginates/chemistry
  7. Recent Advances in Polymer-based Wound Dressings for the Treatment of Diabetic Foot Ulcer: An Overview of State-of-the-art
    Hussain Z, Thu HE, Shuid AN, Katas H, Hussain F
    Curr Drug Targets, 2018;19(5):527-550.
    PMID: 28676002 DOI: 10.2174/1389450118666170704132523
    BACKGROUND: Diabetic foot ulcers (DFUs) are the chronic, non-healing complications of diabetic mellitus which compels a significant burden to the patients and the healthcare system. Peripheral vascular disease, diabetic neuropathy, and abnormal cellular and cytokine/chemokine activity are among the prime players which exacerbate the severity and prevent wound repair. Unlike acute wounds, DFUs impose a substantial challenge to the conventional wound dressings and demand the development of novel and advanced wound healing modalities. In general, an ideal wound dressing should provide a moist wound environment, offer protection from secondary infections, eliminate wound exudate and stimulate tissue regeneration.

    OBJECTIVE: To date, numerous conventional wound dressings are employed for the management of DFUs but there is a lack of absolute and versatile choice. The current review was therefore aimed to summarize and critically discuss the available evidences related to pharmaceutical and therapeutic viability of polymer-based dressings for the treatment of DFUs.

    RESULTS: A versatile range of naturally-originated polymers including chitosan (CS), hyaluronic acid (HA), cellulose, alginate, dextran, collagen, gelatin, elastin, fibrin and silk fibroin have been utilized for the treatment of DFUs. These polymers have been used in the form of hydrogels, films, hydrocolloids, foams, membranes, scaffolds, microparticles, and nanoparticles. Moreover, the wound healing viability and clinical applicability of various mutually modified, semi-synthetic or synthetic polymers have also been critically discussed.

    CONCLUSION: In summary, this review enlightens the most recent developments in polymer-based wound dressings with special emphasis on advanced polymeric biomaterials, innovative therapeutic strategies and delivery approaches for the treatment of DFUs.

    Matched MeSH terms: Alginates/pharmacology; Alginates/therapeutic use
  8. Functional polysaccharides of fucoidan, laminaran and alginate from Malaysian brown seaweeds (Sargassum polycystum, Turbinaria ornata and Padina boryana)
    Mohd Fauziee NA, Chang LS, Wan Mustapha WA, Md Nor AR, Lim SJ
    Int J Biol Macromol, 2021 Jan 15;167:1135-1145.
    PMID: 33188815 DOI: 10.1016/j.ijbiomac.2020.11.067
    Brown seaweeds are rich source of functional polysaccharides that exhibit various bioactivities. However, Malaysian seaweeds are under-utilised, leading to low revenue throughout the supply chain of the seaweed industry. The aims of this study were to extract the functional polysaccharides, namely fucoidan (F), laminaran (L) and alginate (A) from Malaysian brown seaweeds (Sargassum polycystum, Turbinaria ornata and Padina boryana) and subsequently evaluate the properties of the extracted polysaccharides. P. boryana recorded the significantly (p ≤ 0.05) highest carbohydrate content (74.78 ± 1.63%) with highest fucoidan yield (Fpad = 1.59 ± 0.16%) while T. ornata contained significantly (p ≤ 0.05) highest alginate yield (Atur = 105.19 ± 3.45%). Water activities of these extracted polysaccharides varied from 0.63-0.71 with average score of browning indexes (~40). Fourier transform infrared (FTIR) spectroscopy analysis demonstrated that the extracted polysaccharides exhibited similar spectral pattern of spectra with the respective standards. Meanwhile, laminaran extracts showed the significantly highest (p ≤ 0.05) total phenolic contents (Lsar = 43.29 ± 0.43 mgGAE/g) and superoxide anion scavenging activity (Lsig = 21.7 ± 3.6%). On the other hand, the significantly highest (p ≤ 0.05) DPPH scavenging activity was recorded in alginate with Asar at 85.3 ± 0.8%. These findings reported the properties and bioactivities of natural polysaccharides from Malaysian brown seaweeds that revealed the potential to develop high-value functional ingredients from Malaysian brown seaweeds.
    Matched MeSH terms: Alginates/isolation & purification; Alginates/chemistry*
  9. Aging and microwave effects on alginate/chitosan matrices
    Wong TW, Chan LW, Kho SB, Heng PW
    J Control Release, 2005 Jun 2;104(3):461-75.
    PMID: 15911046
    The influence of microwave irradiation on the drug release properties of freshly prepared and aged alginate, alginate-chitosan and chitosan beads was investigated. The beads were prepared by extrusion method with sulphathiazole as a model drug. The dried beads were subjected to microwave irradiation at 80 W for 10 min, 20 min or three consecutive cycles of 10 and 20 min, respectively. The profiles of drug dissolution, drug content, drug stability, drug polymorphism, drug-polymer interaction, polymer crosslinkage and complexation were determined by dissolution testing, drug content assay, differential scanning calorimetry and Fourier transform infra-red spectroscopy. The chemical stability of drug embedded in beads was unaffected by microwave conditions and length of storage time. The release property of drug was mainly governed by the extent of polymer interaction in beads. The aged alginate beads required intermittent cycles of microwave irradiation to induce drug release retarding effect in contrast to their freshly prepared samples. Unlike the alginate beads, the level of polymer interaction was higher in aged alginate-chitosan beads than the corresponding fresh beads. The drug release retarding property of aged alginate-chitosan beads could be significantly enhanced through subjecting the beads to microwave irradiation for 10 min. No further change in drug release from these beads was observed beyond 30 min of microwave irradiation. Unlike beads containing alginate, the rate and extent of drug released from the aged chitosan beads were higher upon treatment by microwave in spite of the higher degree of polymer interaction shown by the latter on prolonged storage. The observation suggested that the response of polymer matrix to microwave irradiation in induction of drug release retarding property was largely affected by the molecular arrangement of the polymer chains.
    Matched MeSH terms: Alginates/radiation effects*; Alginates/chemistry
  10. Effects of storage and yogurt matrix on the stability of tocotrienols encapsulated in chitosan-alginate microcapsules
    Tan PY, Tan TB, Chang HW, Tey BT, Chan ES, Lai OM, et al.
    Food Chem, 2018 Feb 15;241:79-85.
    PMID: 28958562 DOI: 10.1016/j.foodchem.2017.08.075
    Tocotrienol microcapsules (TM) were formed by firstly preparing Pickering emulsion containing tocotrienols, which was then gelled into microcapsules using alginate and chitosan. In this study, we examined the stability of TM during storage and when applied into a model food system, i.e. yogurt. During storage at 40°C, TM displayed remarkably lower tocotrienols loss (50.8%) as compared to non-encapsulated tocotrienols in bulk oil (87.5%). When the tocotrienols were incorporated into yogurt, the TM and bulk oil forms showed a loss of 23.5% and 81.0%, respectively. Generally, the tocotrienols were stable in the TM form and showed highest stability when these TM were added into yogurt. δ-Tocotrienol was the most stable isomer in both forms during storage and when incorporated into yogurt. The addition of TM into yogurt caused minimal changes in the yogurt's color and texture but slightly altered the yogurt's viscosity.
    Matched MeSH terms: Alginates
  11. Enhanced cyanide biodegradation by immobilized crude extract of Rhodococcus UKMP-5M
    Maniyam MN, Ibrahim AL, Cass AEG
    Environ Technol, 2019 Jan;40(3):386-398.
    PMID: 29032742 DOI: 10.1080/09593330.2017.1393015
    The capability of the crude extract of Rhodococcus UKMP-5M was enhanced by adopting the technology of immobilization. Among the matrices screened to encapsulate the crude extract, gellan gum emerged as the most suitable immobilization material, exceeding the activity of cyanide-degrading enzyme by 61% and 361% in comparison to alginate carrier and non-immobilized crude extract, respectively. Improved bead mechanical strength which supported higher biocatalyst activity by 63% was observed when concentration of gellan gum, concentration of calcium chloride, number of beads and bead size were optimized. The immobilized crude extract demonstrated higher tolerance towards broad range of pH (5-10) and temperature (30°C-40°C), superior cyanide-degrading activity over time and improved storage stability by maintaining 76% of its initial activity after 30 days at 4°C. Furthermore, repeated use of the gellan gum beads up to 20 batches without substantial loss in the catalytic activity was documented in the present study, indicating that the durability of the beads and the stability of the enzyme are both above adequate. Collectively, the findings reported here revealed that the utilization of the encapsulated crude extract of Rhodococcus UKMP-5M can be considered as a novel attempt to develop an environmentally favourable and financially viable method in cyanide biodegradation.
    Matched MeSH terms: Alginates
  12. Anti-thrombogenicity and permeability of polyethersulfone hollow fiber membrane with sulfonated alginate toward blood purification
    Salimi E, Ghaee A, Ismail AF, Karimi M
    Int J Biol Macromol, 2018 Sep;116:364-377.
    PMID: 29709537 DOI: 10.1016/j.ijbiomac.2018.04.137
    The main aim of this study was to evaluate the suitability of sulfonated alginate as a modifying agent to enhance the hemocompatibility of self-fabricated polyethersulfone (PES) hollow fiber membrane for blood detoxification. Sodium alginate was sulfonated with a degree of 0.6 and immobilized on the membrane via surface amination and using glutaraldehyde as cross-linking agent. Coating layer not only improved the membrane surface hydrophilicity, but also induced -39.2 mV negative charges on the surface. Water permeability of the modified membrane was enhanced from 67 to 95 L/m2·h·bar and flux recovery ratio increased more than 2-fold. Furthermore, the modified membrane presented higher platelet adhesion resistance (reduced by more than 90%) and prolonged coagulation time (35 s for APTT and 14 s for PT) in comparison with the pristine PES hollow fiber membrane, which verified the improved anti-thrombogenicity of the modified membrane. On the other hand, obtained membrane after 3 h coating could remove up-to 60% of the uremic toxins. According to the obtained data, sulfonated alginate can be a promising modifying agent for the future blood-contacting membrane and specially blood purification issues.
    Matched MeSH terms: Alginates
  13. Fulltext Effects of different drying methods and hydrocolloids on quality properties of semi-dried catfish jerky
    Ishamri Ismail, Nur Husna Mohd Fauzi, Mastura Zahidi Baki, Ho, Lee Hoon
    Malaysian Journal of Applied Sciences, 2018;2(1):11-18.
    MyJurnal
    This study was carried out to evaluate the effects of different drying methods (sun drying, cabinet
    drying and convection oven) and hydrocolloids (carrageenan and alginate) on physicochemical
    properties of semi-dried catfish jerky. The concentration of hydrocolloids used was 1% and 2%.
    Samples without the addition of hydrocolloid served as the control group. The water activity of semidried catfish jerky decreased with the addition of hydrocolloids. For colour properties, lightness (L*)
    value of semi-dried catfish jerky increased with the increased concentration of hydrocolloids. The
    addition of 2% alginate (2%A) and 2% carrageenan (2%C) showed higher lightness (L*) than the
    controlled group for all drying methods, except for sun drying with carrageenan. Both carrageenan and
    alginate added into semi-dried catfish jerky increased the processing yields. The addition of 2%
    carrageenan (2%C) and 1% alginate (1%A) improved the product yields for all drying methods. This
    paper argues that the application of cabinet dryer gives better shelf stability due to the lower range of
    water activity than other drying methods while preserving colour quality and product yields.
    Matched MeSH terms: Alginates
  14. Fulltext Encapsulation of Bifidobacterium pseudocatenulatum Strain G4 within Bovine Gelatin-Genipin-Sodium Alginate Combinations: Optimisation Approach Using Face Central Composition Design-Response Surface Methodology (FCCD-RSM)
    Khalil KA, Mustafa S, Mohammad R, Ariff AB, Ahmad SA, Dahalan FA, et al.
    Int J Microbiol, 2019;2019:4208986.
    PMID: 31093290 DOI: 10.1155/2019/4208986
    Bovine gelatin is a biopolymer which has good potential to be used in encapsulating matrices for probiotic candidate Bifidobacterium pseudocatenulatum strain G4 (G4) because of its amphoteric nature characteristic. Beads were prepared by the extrusion method using genipin and sodium alginate as a cross-linking agent. The optimisation of bovine gelatin-genipin-sodium alginate combinations was carried out using face central composition design (FCCD) to investigate G4 beads' strength, before and after exposed to simulated gastric (SGF), intestinal fluids (SIF), and encapsulation yield. A result of ANOVA and the polynomial regression model revealed the combinations of all three factors have a significant effect (p < 0.05) on the bead strength. Meanwhile, for G4 encapsulation yield, only genipin showed less significant effect on the response. However, the use of this matrix remained due to the intermolecular cross-linking ability with bovine gelatin. Optimum compositions of bovine gelatin-genipin-sodium alginate were obtained at 11.21% (w/v), 1.96 mM, and 2.60% (w/v), respectively. A model was validated for accurate prediction of the response and showed no significant difference (p > 0.05) with experimental values.
    Matched MeSH terms: Alginates
  15. Progress and perspective on algal plastics - A critical review
    Zhang C, Show PL, Ho SH
    Bioresour Technol, 2019 Oct;289:121700.
    PMID: 31262543 DOI: 10.1016/j.biortech.2019.121700
    There is a growing interest in developing bio-based biodegradable plastics to reduce the dependence on depleting fossil fuels and provide a sustainable alternative. Bio-based plastics can usually be produced from lipids, proteins or carbohydrates, which are major components of microalgae. Despite its potential for algal plastics, little information is available on strain selection, culture optimization and bioplastics fabrication mechanism. In this review, we summarized the recent developments in understanding the utilization of seaweed polysaccharides, such as alginate and carrageenan for bio-based plastics. In addition, a conceptual biorefinery framework for algal plastics through promising components (e.g., lipids, carbohydrates and proteins) from microalgae is comprehensively presented. Moreover, the reasons for variations in bioplastics performance and underlying mechanism of various algal biocomposites have been critically discussed. We believe this review can provide valuable information to accelerate the development of innovative green technologies for improving the commercial viability of algal plastics.
    Matched MeSH terms: Alginates
  16. The preparation of graphene ink from the exfoliation of graphite in pullulan, chitosan and alginate for strain-sensitive paper
    Kasim NFA, W Idris WF, Abdullah AH, Yusoh K, Ismail Z
    Int J Biol Macromol, 2020 Jun 15;153:1211-1219.
    PMID: 31756469 DOI: 10.1016/j.ijbiomac.2019.10.251
    A sonication of graphite in polysaccharide (pullulan, chitosan and alginate) is one of the viable methods for the preparation of few-layer graphene. However, the effect of these adsorbed polysaccharides on the electrical performance of the produced graphene so far is not yet clear. In order to investigate the present effect of pullulan, chitosan and alginate on the electrical characteristic of resulted graphene, we have produced few-layer graphene using bath sonication of graphite in pullulan, chitosan and alginate medium for the application as electrical conductive ink in strain-sensitive. Data from the TEM reveals the appearance of folded few-layer graphene flakes after sonication for 150 min while the XPS data shows that the chitosan-based graphene possesses the highest carbon-oxygen ratio of 7.2 as compared to that of the pullulan and alginate-based graphene. By subjecting the produced graphene as the ink for paper-based strain sensor, we have discovered that the chitosan-graphene has the best resistivity value (1.66 × 10-3 Ω⋅cm) and demonstrate the highest sensitivity towards strain (GF: 18.6). This result interestingly implies the potential of the reported chitosan-based conductive ink as a strain-sensitive material for future food packaging.
    Matched MeSH terms: Alginates
  17. Fabrication of alginate microspheres for drug delivery: A review
    Uyen NTT, Hamid ZAA, Tram NXT, Ahmad N
    Int J Biol Macromol, 2020 Jun 15;153:1035-1046.
    PMID: 31794824 DOI: 10.1016/j.ijbiomac.2019.10.233
    Alginate microspheres (AMs) have received much attention as a novel drug delivery system owing to various advantages of alginate such as inexpensiveness, nontoxicity, biocompatibility and biodegradability. The well-designed fabrication method is essential to achieve desired AMs suitable for specific drug delivery system. Reports on AMs preparation techniques have increased rapidly in the last decade. A number of synthesis parameters have been investigated for the improvement of physical, chemical and biological properties of AMs. Hence, this review summarizes the work to date on the fabrication techniques of AMs for drug delivery system, including spray-drying, extrusion and emulsification/gelation technique. Besides, the influence of various factors such as alginate concentration, oil phase, surfactant, cross-linker concentrations, cross-linking time, stirring speed, model drug and drug content on the morphologies, properties and encapsulation efficiency (EE) of AMs via extrusion and emulsification/gelation technique are summarized. Before embarking on the development of any drug delivery system, a thorough understanding of drug release mechanism and factors that impact the drug release profile are essential, which are also covered in this review.
    Matched MeSH terms: Alginates
  18. Efficiency of pollutants removal in treated palm oil mill effluent (TPOME) using different concentrations of sodium alginate-immobilized Nannochloropsis sp. cells
    Emparan Q, Harun R, Sing Jye Y
    Int J Phytoremediation, 2021;23(5):454-461.
    PMID: 32976718 DOI: 10.1080/15226514.2020.1825327
    Palm oil mill effluent (POME) has high chemical oxygen demand (COD), thus requires effective treatments to environmentally benign levels before discharge. In this study, immobilized microalgae cells are used for removing pollutants in treated palm oil mill effluent (TPOME). Different ratios of microalgae beads to TPOME concentration were examined at 1:2.5, 1:5, and 1:10. The biomass concentration and COD removal were measured through a standard method. The color of the cultivated microalgae beads changed from light green to darker green after the POME treatment for 9 days, hence demonstrating that microalgae cells were successfully grown inside the beads with pH up to 9.84. The immobilized cells cultivated in the POME at 1:10 achieved a higher biomass concentration of 1.268 g/L and a COD removal percentage of 72% than other treatment ratios. The increment of the ratio of microalgae cells beads to POME concentration did not cause any improvement in COD removal efficiency. This was due to the inhibitory effect of self-shading resulting in the slow growth rate of microalgae cells which responsible for low COD removal. Therefore, this system could be a viable technology for simultaneous biomass production and POME treatment. This will contribute to research efforts toward the development of new and improved technologies in treating POME.
    Matched MeSH terms: Alginates
  19. Taguchi design-assisted immobilization of Candida rugosa lipase onto a ternary alginate/nanocellulose/montmorillonite composite: Physicochemical characterization, thermal stability and reusability studies
    Mohd Hussin FNN, Attan N, Wahab RA
    Enzyme Microb Technol, 2020 May;136:109506.
    PMID: 32331714 DOI: 10.1016/j.enzmictec.2019.109506
    Biomass from oil palm frond leaves (OPFL) is an excellent reservoir of lignocellulosic material which full potential remains untapped. This study aimed to statistically optimize the covalent immobilization of Candida rugosa lipase (CRL) onto a ternary support comprised of OPFL derived nanocellulose (NC) and montmorillonite (MMT) in alginate (ALG) (CRL-ALG/NC/MMT). The coarser topology and the presence of characteristic spherical globules in the field emission scanning electron micrographs and atomic force micrographs, respectively, supported the existence of CRL on ALG/NC/MMT. In addition, amide peaks at 3478 and 1640 cm-1 in the fourier transform infrared spectra affirmed that CRL was covalently bonded to ALG/NC/MMT. The optimized Taguchi Design-assisted immobilization of CRL onto ALG/NC/MMT (7 h of immobilization, 35℃, pH 5, 7 mg/mL protein loading) gave a production yield of 92.89 % of ethyl levulinate (EL), as proven by gas chromatography-mass spectrometric ([M] +m/z 144, C7H12O3), FTIR and nuclear magnetic resonance (CAS-539-88-8) data. A higher optimal reaction temperature (50℃) and the reusability of CRL-ALG/NC/MMT for up to 9 esterification cycles substantiated the appreciable structural rigidification of the biocatalyst by ALG/NC/MMT, which improved the catalytic activity and thermal stability of the lipase.
    Matched MeSH terms: Alginates
  20. Fulltext Design of polysaccharidic nano-in-micro soft agglomerates as primary oral drug delivery vehicle for colon-specific targeting
    Musa N, Wong TW
    Carbohydr Polym, 2020 Nov 01;247:116673.
    PMID: 32829801 DOI: 10.1016/j.carbpol.2020.116673
    Microencapsulation of polysaccharidic nanoparticles is met with nanoscale and biological performance changes. This study designs soft agglomerates as nanoparticle vehicle without nanoparticles undergoing physical processes that alter their geometry. The nanoparticles were made of high molecular weight chitosan/pectin with covalent 5-fluorouracil/folate. Nanoparticle aggregation vehicle was prepared from low molecular weight chitosan. The nanoparticles and aggregation vehicle were blended in specific weight ratios to produce soft agglomerates. Nanoparticles alone are unable to agglomerate. Adding aggregation vehicle (< 2 μm) promoted soft agglomeration with nanoparticles deposited onto its surfaces with minimal binary coalescence. The large and rough-surfaced aggregation vehicle promoted nanoparticles deposition and agglomeration. A rounder vehicle allowed assembly of nanoparticles-on-aggregation vehicle into agglomerates through interspersing smaller between larger populations. Soft agglomeration reduced early drug release, and was responsive to intracapsular sodium alginate coat to further sustain drug release. The soft agglomerates can serve as a primary oral colon-specific vehicle.
    Matched MeSH terms: Alginates
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links