Displaying publications 21 - 40 of 72 in total

Abstract:
Sort:
  1. The use of warning lights and siren by the ambulance crew in the Universiti Kebangsaan Malaysia Medical Centre
    Ismail AK, Mohd Salleh NI, Hamdan NA, Mohd Jawi MI, Abdul Razak SN, Md Jamal S, et al.
    Eur J Emerg Med, 2012 Dec;19(6):408-9.
    PMID: 22343753 DOI: 10.1097/MEJ.0b013e328351e62e
    Matched MeSH terms: Lighting*
  2. An indicator device for monitoring of room illuminance level in the radiological image viewing environment
    Azlan CA, Ng KH, Anandan S, Nizam MS
    Australas Phys Eng Sci Med, 2006 Sep;29(3):278-80.
    PMID: 17058591
    Illuminance level in the softcopy image viewing room is a very important factor to optimize productivity in radiological diagnosis. In today's radiological environment, the illuminance measurements are normally done during the quality control procedure and performed annually. Although the room is equipped with dimmer switches, radiologists are not able to decide the level of illuminance according to the standards. The aim of this study is to develop a simple real-time illuminance detector system to assist the radiologists in deciding an adequate illuminance level during radiological image viewing. The system indicates illuminance in a very simple visual form by using light emitting diodes. By employing the device in the viewing room, illuminance level can be monitored and adjusted effectively.
    Matched MeSH terms: Lighting/instrumentation*
  3. Electrical behaviour of MEH-PPV based diode and transistor
    Reshak AH, Shahimin MM, Juhari N, Suppiah S
    Prog Biophys Mol Biol, 2013 Nov;113(2):289-94.
    PMID: 24080185 DOI: 10.1016/j.pbiomolbio.2013.09.002
    The potential of organic semiconductor based devices for light generation is demonstrated by the commercialisation of display technologies using organic light emitting diode (OLED). In OLED, organic materials plays an important role of emitting light once the current is passed through. However OLED have drawbacks whereby it suffers from photon loss and exciton quenching. Organic light emitting transistor (OLET) emerged as a new technology to compensate the efficiency and brightness loss encountered in OLED. The structure has combinational capability to switch the electronic signal such as the field effect transistor (FET) as well as to generate light. Different colours of light could be generated by using different types of organic material. The light emission could also be tuned and scanned in OLET. The studies carried out in this paper focuses on investigation of fabricated MEH-PPV based OLED and also OLET via current voltage characteristics. These studies will continue with a view to develop an optimised MEH-PPV based OLET.
    Matched MeSH terms: Lighting/instrumentation*
  4. Fulltext Illumination Intelligent Adaptation and Analysis Framework: A comprehensive solution for enhancing nighttime driving fatigue monitoring
    Tian Z, Albakry NS, Du Y
    PLoS One, 2024;19(8):e0308201.
    PMID: 39141655 DOI: 10.1371/journal.pone.0308201
    Nighttime driving presents a critical challenge to road safety due to insufficient lighting and increased risk of driver fatigue. Existing methods for monitoring driver fatigue, mainly focusing on behavioral analysis and biometric monitoring, face significant challenges under low-light conditions. Their effectiveness, especially in dynamic lighting environments, is limited by their dependency on specific environmental conditions and active driver participation, leading to reduced accuracy and practicality in real-world scenarios. This study introduces a novel 'Illumination Intelligent Adaptation and Analysis Framework (IIAAF)', aimed at addressing these limitations and enhancing the accuracy and practicality of driver fatigue monitoring under nighttime low-light conditions. The IIAAF framework employs a multidimensional technology integration, including comprehensive body posture analysis and facial fatigue feature detection, per-pixel dynamic illumination adjustment technology, and a light variation feature learning system based on Convolutional Neural Networks (CNN) and time-series analysis. Through this integrated approach, the framework is capable of accurately capturing subtle fatigue signals in nighttime driving environments and adapting in real-time to rapid changes in lighting conditions. Experimental results on two independent datasets indicate that the IIAAF framework significantly improves the accuracy of fatigue detection under nighttime low-light conditions. This breakthrough not only enhances the effectiveness of driving assistance systems but also provides reliable scientific support for reducing the risk of accidents caused by fatigued driving. These research findings have significant theoretical and practical implications for advancing intelligent driving assistance technology and improving nighttime road safety.
    Matched MeSH terms: Lighting*
  5. Fulltext VR-based experimental study on daylight brightness, satisfaction and room use preference in housing design
    Azmi A, Salih SA, Ummihusna A, Ghafar MA
    Acta Psychol (Amst), 2026 Oct;270:107902.
    PMID: 42804849 DOI: 10.1016/j.actpsy.2026.107902
    Virtual reality (VR) enables immersive simulations of building designs that enhance user engagement and spatial understanding. This study investigates how virtual daylight conditions in virtual residential environments influence occupants' emotional and behavioral responses. A within-subjects experimental study was conducted with 30 participants. Each participant experienced two virtual environment settings (rooms with different window orientation) using an HTC Vive head-mounted display. Participants rated each scene on brightness, pleasure, satisfaction, and preference to use the room. The relationships between brightness and emotional responses were analyzed using Partial Least Squares Structural Equation Modeling (PLS-SEM). Results show that brightness variations in VR due to window orientation significantly affected pleasure and satisfaction of home occupants in the virtual environment. Brighter rooms in the virtual environment increased both pleasure and satisfaction. Satisfaction showed a strong positive correlation with room usage preference, whereas pleasure had a small negative effect on preference. Participants were more likely to prefer rooms in which they felt satisfied with the lighting, even though increased pleasure did not translate directly into greater room preference. Overall, the study revealed that daylight influences comfort - brightness strongly correlates with satisfaction, and satisfaction strongly drives room preference. By empirically linking simulated daylight to emotional responses and behavior, the research advocates integrating VR into early architectural design to explore daylight strategies.
    Matched MeSH terms: Lighting*
  6. Change in level of classroom lighting at a special education school distortion of vision and comparison of lighting at different lighting conditions
    Wan Nur ‘Amirah Ibrahim, Zainora Mohammed, Norliza Mohamad Fadzil, Sumithira Narayanasamy, Mohd ‘Izzuddin Hairol
    Sains Malaysiana, 2018;47:1835-1842.
    Illumination is one of the important physical aspects that influences comfortability during learning session particularly
    among visually impaired students. The purpose of this study was to determine changes in illumination level in classrooms
    during learning session at Sekolah Menengah Pendidikan Khas (SMPK), Setapak. The second objective was to compare
    the illumination level in the classrooms under three different lighting conditions: daylight only, with additional artificial
    light and with removal of obstructions to daylight. Illumination levels in 17 classrooms was measured at one hour interval,
    between 8 am to 1 pm for the first stage and 19 classrooms under three different lighting conditions from 11 am to 12 noon
    for the second stage, using ILM1335 (ISO-TECH, Taiwan) digital luxmeter. Illumination level increased significantly from
    8 am to 11 am (One-Way Repeated Measures ANOVA: F(2.14, 34.26)=76.49, p<0 .001) and was maximum at 1 pm. The
    illumination level was highest for the condition of daylight with additional artificial light (One-Way Repeated Measures
    ANOVA: F(2,34)=110.51, p<0.001) compared to other conditions. Illumination levels for daylight without obstruction
    was significantly higher than daylight only (pairwise comparison: p=0.001). Classroom illumination level was lowest
    in the early morning. However, classroom illumination can be increased either by removing the obstructions to daylight
    or with additional artificial lighting.
    Matched MeSH terms: Lighting
  7. Fulltext Car license plate detection method for Malaysian plates-styles by using a web camera
    Al-Ghaili, Abbas M., Syamsiah Mashohor, Abdul Rahman Ramli, Alyani Ismail
    Pertanika Journal of Science & Technology, 2010;18(2):-.
    MyJurnal
    Recently, license plate detection has been used in many applications especially in transportation systems. Many methods have been proposed in order to detect license plates, but most of them work under restricted conditions such as fixed illumination, stationary background, and high resolution images. License plate detection plays an important role in car license plate recognition systems because it affects the accuracy and processing time of the system. This work aims to build a Car License Plate Detection (CLPD) system at a lower cost of its hardware devices and with less complexity of algorithms’ design, and then compare its performance with the local CAR Plate Extraction Technology (CARPET). As Malaysian plates have special design and they differ from other international plates, this work tries to compare two likely-design methods. The images are taken using a web camera for both the systems. One of the most important contributions in this paper is that the proposed CLPD method uses Vertical Edge Detection Algorithm (VEDA) to extract the vertical edges of plates. The proposed CLPD method can work to detect the region of car license plates. The method shows the total time of processing one 352x288 image is 47.7 ms, and it meets the requirement of real time processing. Under the experiment datasets, which were taken from real scenes, 579 out of 643 images were successfully detected. Meanwhile, the average accuracy of locating car license plate was 90%. In this work, a comparison between CARPET and the proposed CLPD method for the same tested images was done in terms of detection rate and efficiency. The results indicated that the detection rate was 92% and 84% for the CLPD method and CARPET, respectively. The results also showed that the CLPD method could work using dark images to detect license plates, whereas CARPET had failed to do so.
    Matched MeSH terms: Lighting
  8. Fulltext Microfluidic systems for dielectrophoretic separation of fluorescent particles
    Yunus, N.A.M., Jaafar, H., Halin, I.A., Green, N.G.
    ASM Science Journal, 2014;8(1):29-35.
    MyJurnal
    This paper presents a suitable and unique system for observing dielectrophoretic particle separation in a microfluidic device. Details presented on the experimental setup used will enable real time examination, monitoring and analysis of carboxylate-modified latex sphere particles in a colloidal mixture. Observations of the particles were made possible through an optical setup that illuminates the particles that went through the microelectrode array in the microchannel that was controlled by two analog signal generators. Through the setup, it was easily observed that the latex sphere particles move at a flow rate of 0.2 μl/s without colliding or overlapping on each other and successfully separated in two bands left and right. The new separation of one finest particles size for finest purification with respect to frequency was also observed, obtained and analysed.
    Matched MeSH terms: Lighting
  9. Fulltext An Adaptive TE-PV Hybrid Energy Harvesting System for Self-Powered IoT Sensor Applications
    Mishu MK, Rokonuzzaman M, Pasupuleti J, Shakeri M, Rahman KS, Binzaid S, et al.
    Sensors (Basel), 2021 Apr 08;21(8).
    PMID: 33917665 DOI: 10.3390/s21082604
    In this paper, an integrated thermoelectric (TE) and photovoltaic (PV) hybrid energy harvesting system (HEHS) is proposed for self-powered internet of thing (IoT)-enabled wireless sensor networks (WSNs). The proposed system can run at a minimum of 0.8 V input voltage under indoor light illumination of at least 50 lux and a minimum temperature difference, ∆T = 5 °C. At the lowest illumination and temperature difference, the device can deliver 0.14 W of power. At the highest illumination of 200 lux and ∆T = 13 °C, the device can deliver 2.13 W. The developed HEHS can charge a 0.47 F, 5.5 V supercapacitor (SC) up to 4.12 V at the combined input voltage of 3.2 V within 17 s. In the absence of any energy sources, the designed device can back up the complete system for 92 s. The sensors can successfully send 39 data string to the webserver within this time at a two-second data transmission interval. A message queuing telemetry transport (MQTT) based IoT framework with a customised smartphone application 'MQTT dashboard' is developed and integrated with an ESP32 Wi-Fi module to transmit, store, and monitor the sensors data over time. This research, therefore, opens up new prospects for self-powered autonomous IoT sensor systems under fluctuating environments and energy harvesting regimes, however, utilising available atmospheric light and thermal energy.
    Matched MeSH terms: Lighting
  10. Fulltext Robust observation detection for single object tracking: deterministic and probabilistic patch-based approaches
    Zulkifley MA, Rawlinson D, Moran B
    Sensors (Basel), 2012;12(11):15638-70.
    PMID: 23202226 DOI: 10.3390/s121115638
    In video analytics, robust observation detection is very important as the content of the videos varies a lot, especially for tracking implementation. Contrary to the image processing field, the problems of blurring, moderate deformation, low illumination surroundings, illumination change and homogenous texture are normally encountered in video analytics. Patch-Based Observation Detection (PBOD) is developed to improve detection robustness to complex scenes by fusing both feature- and template-based recognition methods. While we believe that feature-based detectors are more distinctive,however, for finding the matching between the frames are best achieved by a collection of points as in template-based detectors. Two methods of PBOD-the deterministic and probabilistic approaches-have been tested to find the best mode of detection. Both algorithms start by building comparison vectors at each detected points of interest. The vectors are matched to build candidate patches based on their respective coordination. For the deterministic method, patch matching is done in 2-level test where threshold-based position and size smoothing are applied to the patch with the highest correlation value. Forthe second approach, patch matching is done probabilistically by modelling the histograms of the patches by Poisson distributions for both RGB and HSV colour models. Then,maximum likelihood is applied for position smoothing while a Bayesian approach is appliedfor size smoothing. The result showed that probabilistic PBOD outperforms the deterministic approach with average distance error of 10.03% compared with 21.03%. This algorithm is best implemented as a complement to other simpler detection methods due to heavy processing requirement.
    Matched MeSH terms: Lighting
  11. Levels of Visual Stress in Proficient Readers: Effects of Spectral Filtering of Fluorescent Lighting on Reading Discomfort
    Loew SJ, Rodríguez C, Marsh NV, Jones GL, Núñez JC, Watson K
    Span J Psychol, 2015;18:E58.
    PMID: 26255657 DOI: 10.1017/sjp.2015.59
    Visual stress (VS) affects reading in 5-12% of the general population and 31-36% of children with reading disorders. Symptoms include print distortions and visual discomfort when reading, and are exacerbated by fluorescent lighting. Prior research has indicated that VS can also affect proficient readers. We therefore examined levels of visual discomfort in a group of expert readers (n = 24) under both standard and spectrally-filtered fluorescent lighting. Participants rated their awareness of six symptoms of VS under each lighting condition. Under the standard condition, 4(16.7%) of the group recorded moderate to high levels of VS. Differences in symptom levels and reading speed between conditions were analysed using the Wilcoxon Signed Rank Test. Under the filter condition, the group reported less discomfort regarding all six symptoms of VS surveyed. The differences were significant with respect to three of the symptoms (p = .029 - p < .001), with a medium effect size in all of them (r = .31 - r = .46) and total score (p = .007; r = .39). Variations in reading proficiency included significantly fewer self-corrections (p = .019) and total errors (p = .004). Here we present evidence that VS-type symptoms of reading discomfort are not confined to populations with reading difficulties and may also occur in proficient readers, and that simple adaptations to fluorescent lighting may alleviate such symptoms.
    Matched MeSH terms: Lighting/adverse effects*; Lighting/standards
  12. Fulltext Effect of Temperature and Growth Time on Vertically Aligned ZnO Nanorods by Simplified Hydrothermal Technique for Photoelectrochemical Cells
    Mohd Fudzi L, Zainal Z, Lim HN, Chang SK, Holi AM, Sarif Mohd Ali M
    Materials (Basel), 2018 Apr 29;11(5).
    PMID: 29710822 DOI: 10.3390/ma11050704
    Despite its large band gap, ZnO has wide applicability in many fields ranging from gas sensors to solar cells. ZnO was chosen over other materials because of its large exciton binding energy (60 meV) and its stability to high-energy radiation. In this study, ZnO nanorods were deposited on ITO glass via a simple dip coating followed by a hydrothermal growth. The morphological, structural and compositional characteristics of the prepared films were analyzed using X-ray diffractometry (XRD), field emission scanning electron microscopy (FESEM), and ultraviolet-visible spectroscopy (UV-Vis). Photoelectrochemical conversion efficiencies were evaluated via photocurrent measurements under calibrated halogen lamp illumination. Thin film prepared at 120 °C for 4 h of hydrothermal treatment possessed a hexagonal wurtzite structure with the crystallite size of 19.2 nm. The average diameter of the ZnO nanorods was 37.7 nm and the thickness was found to be 2680.2 nm. According to FESEM images, as the hydrothermal growth temperature increases, the nanorod diameter become smaller. Moreover, the thickness of the nanorods increase with the growth time. Therefore, the sample prepared at 120 °C for 4 h displayed an impressive photoresponse by achieving high current density of 0.1944 mA/cm².
    Matched MeSH terms: Lighting
  13. Facile synthesis of AgCl/BiYO3 composite for efficient photodegradation of RO16 under UV and visible light irradiation
    Sirimahachai R, Harome H, Wongnawa S
    Sains Malaysiana, 2017;46:1393-1399.
    AgCl/BiYO3
    composite was successfully synthesized via the aqueous precipitation method followed by calcination. The
    varied amount of AgCl (10, 20 and 30%) was mixed into BiYO3
    via sonochemical-assisted method. The structures and
    morphologies of the as-prepared AgCl/BiYO3
    composite were characterized by x-ray diffraction (XRD), scanning electron
    microscopy (SEM) and UV-vis diffused reflectance spectroscopy (UV-vis DRS). The optical absorption spectrum of AgCl/
    BiYO3
    composite showed strong absorption in visible region. The photocatalytic activity of AgCl/BiYO3
    composite was
    evaluated by the photodegradation of reactive orange16 (RO16), which was selected to represent the dye pollutants,
    under UV and visible light irradiation. The results indicated that 20% AgCl/BiYO3 photocatalyst was the most capable
    photocatalyst in this series in the degradation of RO16 under both UV and visible light illumination within 1 h. Moreover,
    the mechanism of photocatalytic degradation of AgCl/BiYO3
    was elucidated using three types of free radical scavengers.
    The significant enhancement was attributed to the formation of AgCl/BiYO3
    heterojunction resulting in the low electronhole
    pair recombination rate.
    Matched MeSH terms: Lighting
  14. Fulltext The Effects of Different Outdoor Environments, Sunglasses and Hats on Light Levels: Implications for Myopia Prevention
    Lanca C, Teo A, Vivagandan A, Htoon HM, Najjar RP, Spiegel DP, et al.
    Transl Vis Sci Technol, 2019 Jul;8(4):7.
    PMID: 31360613 DOI: 10.1167/tvst.8.4.7
    Purpose: Lack of outdoor time is a known risk factor for myopia. Knowledge of the light levels reaching the eye and exposure settings, including sun-protective measures, is essential for outdoor programs and myopia. We evaluated the impact of sun-protective strategies (hat and sunglasses) on maintaining high illuminance levels to prevent myopia.

    Methods: A child-sized mannequin head was developed to measure light illuminance levels with and without sun-protective equipment, across a wide range of environments in Singapore, outdoors (open park, under a tree, street) and indoors (under a fluorescent illumination with window, under white LED-based lighting without window). A comparison was made between indoor and outdoor light levels that are experienced while children are involved in day-to-day activities.

    Results: Outdoor light levels were much higher (11,080-18,176 lux) than indoors (112-156 lux). The higher lux levels protective of myopia (>1000 lux) were measured at the tree shade (5556-7876 lux) and with hat (4112-8156 lux). Sunglasses showed lux levels between 1792 and 6800 lux. Although with sunglasses readings were lower than tree shade and hat, light levels were still 11 to 43 times higher than indoors.

    Conclusions: Recommendations on spending time outdoors for myopia prevention with adequate sun protection should be provided while partaking in outdoor activities, including protection under shaded areas, wearing a hat or sunglasses, sunscreen, and adequate hydration.

    Translational Relevance: Light levels outdoors were higher than indoors and above the threshold illuminance for myopia prevention even with adequate sun-protective measures.

    Matched MeSH terms: Lighting
  15. Fulltext Towards health monitoring using remote heart rate measurement using digital camera: A feasibility study
    Hassan MA, Malik AS, Fofi D, Karasfi B, Meriaudeau F
    Measurement : journal of the International Measurement Confederation, 2020 Jan;149:106804.
    PMID: 32287815 DOI: 10.1016/j.measurement.2019.07.032
    The paper presents a feasibility study for heart rate measurement using a digital camera to perform health monitoring. The feasibility study investigates the reliability of the state of the art heart rate measuring methods in realistic situations. Therefore, an experiment was designed and carried out on 45 subjects to investigate the effects caused by illumination, motion, skin tone, and distance variance. The experiment was conducted for two main scenarios; human-computer interaction scenario and health monitoring scenario. The human-computer scenario investigated the effects caused by illumination variance, motion variance, and skin tone variance. The health monitoring scenario investigates the feasibility of health monitoring at public spaces (i.e. airports, subways, malls). Five state of the art heart rate measuring methods were re-implemented and tested with the feasibility study database. The results were compared with ground truth to estimate the heart rate measurement error. The heart rate measurement error was analyzed using mean error, standard deviation; root means square error and Pearson correlation coefficient. The findings of this experiment inferred promising results for health monitoring of subjects standing at a distance of 500 cm.
    Matched MeSH terms: Lighting
  16. Enhanced Photocatalytic Performance of Sn6SiO8 Nanoparticles and Their Reduced Graphene Oxide (rGO) Nanocomposite
    Gnanamoorthy G, Muthukumaran M, Varun Prasath P, Karthikeyan V, Narayanan V, Sagadevan S, et al.
    J Nanosci Nanotechnol, 2020 09 01;20(9):5426-5432.
    PMID: 32331114 DOI: 10.1166/jnn.2020.17814
    Photocatalysts provide excellent potential for the full removal of organic chemical pollutants as an environmentally friendly technology. It has been noted that under UV-visible light irradiation, nanostructured semiconductor metal oxides photocatalysts can degrade different organic pollutants. The Sn6SiO8/rGO nanocomposite was synthesized by a hydrothermal method. The Sn6SiO8 nanoparticles hexagonal phase was confirmed by XRD and functional groups were analyzed by FT-IR spectroscopy. The bandgap of Sn6SiO8 nanoparticles (NPs) and Sn6SiO8/GO composites were found to be 2.7 eV and 2.5 eV, respectively. SEM images of samples showed that the flakes like morphology. This Sn6SiO8/rGO nanocomposite was testing for photocatalytic dye degradation of MG under visible light illumination and excellent response for the catalysts. The enhancement of photocatalytic performance was mainly attributed to the increased light absorption, charge separation efficiency and specific surface area, proved by UV-vis DRS. Further, the radical trapping experiments revealed that holes (h+) and superoxide radicals (·O-₂) were the main active species for the degradation of MG, and a possible photocatalytic mechanism was discussed.
    Matched MeSH terms: Lighting
  17. Isolation of chromatic and achromatic mechanisms: a new approach
    Sharanjeet-Kaur, Kulikowski JJ, Carden D
    Ophthalmic Physiol Opt, 1998 Jan;18(1):49-56.
    PMID: 9666910
    The purpose of this study was to optimise the testing paradigm for isolating the contributions of chromatic and achromatic mechanisms to the human spectral sensitivity function. Spectral sensitivity was determined for a test spot size of 1.2 deg presented with various spatial and temporal masks on a large, 10 deg background field of moderate intensity (1000 td) and colour temperature, CT = 2700 K. Sinusoidal temporal presentation (1 Hz) and a masking annulus of between 3 and 10 min of arc surrounding the test spot, was found to be most effective in separating chromatic from achromatic mechanisms. Square-wave (1 Hz) temporal presentation combined with the annulus was slightly less selective. The presence of the annulus did not affect the shape of flicker detection at 25 Hz which is a measure of the luminosity (achromatic) spectral sensitivity function.
    Matched MeSH terms: Lighting
  18. Skin colour detection based on an adaptive multi thresholding technique
    Ahmed M. Mbarib, Mohammad Hamiruce Marhaban, Abdul Rahman Ramli
    Pertanika Journal of Science & Technology, 2007;15(2):103-111.
    MyJurnal
    Skin colour is an important visual cue for face detection, face recogmtlon, hand segmentation for gesture analysis and filtering of objectionable images. In this paper, the adaptive skin color detection model is proposed, based on two bivariate normal distribution models of the skin chromatic subspace, and on image segmentation using an automatic and adaptive multi-thresholding technique. Experimental results on images presenting a wide range of variations in lighting condition and background demonstrate the efficiency of the proposed skin-segmentation algorithm.
    Matched MeSH terms: Lighting
  19. Fulltext Application of computer vision in the detection of chilling injury in bananas
    Norhashila Hashim, Rimfiel B. Janius, Russly Abdul Rahman, Azizah Osman, Zude, Manuela, Shitan, Mahendran
    Pertanika Journal of Science & Technology, 2013;21(1):111-118.
    MyJurnal
    Bananas were chilled at 6oC and the appearance of brown spots when exposed to ambient air, a
    phenomenon known as chilling injury (CI), was detected using computer vision. The system consisted of a digital colour camera for acquiring images, an illumination set-up for uniform lighting, a computer for receiving, storing and displaying of images and software for analyzing the images. The RGB colour space values of the images were transformed into that of HSI colour space which is intuitive to human vision. Visual assessment of CI by means of a browning scale was used as a reference and correlation between this reference values and hue was investigated. Results of the computer vision study successfully demonstrate the potential of the system in substituting visual assessment in the evaluation of CI in bananas. The results indicate significant influence, at α=0.05, of treatment days and temperature on hue. A strong correlation was also found between hue and visual assessment with R>0.85.
    Matched MeSH terms: Lighting
  20. Fulltext Design and Development of a Nearable Wireless System to Control Indoor Air Quality and Indoor Lighting Quality
    Salamone F, Belussi L, Danza L, Galanos T, Ghellere M, Meroni I
    Sensors (Basel), 2017 May 04;17(5).
    PMID: 28471398 DOI: 10.3390/s17051021
    The article describes the results of the project "open source smart lamp" aimed at designing and developing a smart object able to manage and control the indoor environmental quality (IEQ) of the built environment. A first version of this smart object, built following a do-it-yourself (DIY) approach using a microcontroller, an integrated temperature and relative humidity sensor, and techniques of additive manufacturing, allows the adjustment of the indoor thermal comfort quality (ICQ), by interacting directly with the air conditioner. As is well known, the IEQ is a holistic concept including indoor air quality (IAQ), indoor lighting quality (ILQ) and acoustic comfort, besides thermal comfort. The upgrade of the smart lamp bridges the gap of the first version of the device providing the possibility of interaction with the air exchange unit and lighting system in order to get an overview of the potential of a nearable device in the management of the IEQ. The upgraded version was tested in a real office equipped with mechanical ventilation and an air conditioning system. This office was occupied by four workers. The experiment is compared with a baseline scenario and the results show how the application of the nearable device effectively optimizes both IAQ and ILQ.
    Matched MeSH terms: Lighting
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links