A major worldwide challenge that presents significant economic, environmental, and social concerns is the rising generation of food waste. The current work used chicken bones (CB) and rice (R) food waste as alternate precursors for the production of activated carbon (CBRAC) by microwave radiation-assisted ZnCl2 activation. The adsorption characteristics of CBRAC were investigated in depth by removing an organic dye (crystal violet, CV) from an aquatic environment. To establish ideal conditions from the significant adsorption factors (A: CBRAC dosage (0.02-0.12 g/100 mL); B: pH (4-10); and C: duration (30-420), a numerical desirability function of Box-Behnken design (BBD) was utilized. The highest CV decolorization by CBRAC was reported to be 90.06% when the following conditions were met: dose = 0.118 g/100 mL, pH = 9.0, and time = 408 min. Adsorption kinetics revealed that the pseudo-first order (PFO) model best matches the data, whereas the Langmuir model was characterized by equilibrium adsorption, where the adsorption capacity of CBRAC for CV dye was calculated to be 57.9 mg/g. CV adsorption is accomplished by several processes, including electrostatic forces, pore diffusion, π-π stacking, and H-bonding. This study demonstrates the use of CB and R as biomass precursors for the efficient creation of CBRAC and their use in wastewater treatment, resulting in a greener environment.
In recent years, there has been considerable interest in the use of natural fibers as potential reinforcing fillers in polymer composites despite their hydrophilicity, which limits their widespread commercial application. The present study explored the fabrication of nanocomposites by melt mixing, using an internal mixer followed by a compression molding technique, and incorporating rice husk (RH) as a renewable natural filler, montmorillonite (MMT) nanoclay as water-resistant reinforcing nanoparticles, and polypropylene-grafted maleic anhydride (PP-g-MAH) as a compatibilizing agent. To correlate the effect of MMT delamination and MMT/RH dispersion in the composites, the mechanical and thermal properties of the composites were studied. XRD analysis revealed delamination of MMT platelets due to an increase in their interlayer spacing, and SEM micrographs indicated improved dispersion of the filler(s) from the use of compatibilizers. The mechanical properties were improved by the incorporation of MMT into the PP/RH system and the reinforcing effect was remarkable as a result of the use of compatibilizing agent. Prolonged water exposure of the prepared samples decreased their tensile and flexural properties. Interestingly, the maximum decrease was observed for PP/RH composites and the minimum was for MMT-reinforced and PP-g-MAH-compatibilized PP/RH composites. DSC results revealed an increase in crystallinity with the addition of filler(s), while the melting and crystallization temperatures remained unaltered. TGA revealed that MMT addition and its delamination in the composite systems improved the thermal stability of the developed nanocomposites. Overall, we conclude that MMT nanoclay is an effective water-resistant reinforcing nanoparticle that enhances the durability, mechanical properties, and thermal stability of composites.
Background: The present study describes the morphology of sparganum (larva) of the Malaysian Spirometra spp. collected from naturally infected frogs (Rana cancrivora) from rice fields in Tanjung Karang, Malaysia.
Materials and Methods: Spargana of Spirometra spp. collected from naturally infected frogs (Rana cancrivora) were used for the morphological studies. Stretched on a metal ruler, measurements of the worm were recorded. Specimens were stained in Alum-carmine.
Results: The length of the body ranged from 11-50 mm and the width ranged from 0.5-1.5 mm. Specimens stained with Alum-carmine showed ridges (formation of segments) on the surface of the body, and no sexual organs in the body.
Conclusion: The Malaysian Spirometra spp. are similar in measurement and morphology to Spirometra erinacei but further studies are required for confirmation.
The presence of heavy metals in aquatic systems has become a serious problem. Heavy metals can haveadverse effects on the environment as well as on human health. As a result, much attention has beengiven to new technologies for removal of heavy metal ions from contaminated waters. In this study,Microwave Incinerated Rice Husk Ash (MIRHA), a locally available agricultural waste, was used for theremoval of Cd (as a representative heavy metal) from synthetic wastewater by batch adsorption process.The effects of pH, initial metal concentration, and contact time on Cd removal efficiency were studied.pH 4 was found to be the optimum. The removal efficiency was found to be correlated with the initialmetal concentration and contact time between adsorbent and adsorbate. Cd adsorption kinetics followedthe pseudo-second-order model and implied chemisorption. The adsorption equilibrium of Cd can bewell described by the Freundlich isotherm model.
This paper describes the synthesis of graphene-based activated carbon from carbonaceous rice straw fly ash in an electrical furnace and the subsequent potassium hydroxide extraction. The produced graphene has a proper morphological structure; flakes and a rough surface can be observed. The average size of the graphene was defined as up to 2000 nm and clarification was provided by high-resolution microscopes (FESEM and FETEM). Crystallinity was confirmed by surface area electron diffraction. The chemical bonding from the graphene was clearly observed, with -C=C- and O-H stretching at peaks of 1644 cm-1 and 3435 cm-1, respectively. Impurities in the graphene were found using X-ray photoelectron spectroscopy and energy dispersive X-ray spectroscopy. The measured size, according to zeta-potential analysis, was 8722.2 ± 25 nm, and the average polydispersity index was 0.576. The stability of the mass reduction was analyzed by a thermogravimetric at 100 °C, with a final reduction of ~ 11%.
A chemical method to synthesize amorphous silica nanoparticles from the incinerated paddy straw has been introduced. The synthesis was conducted through the hydrolysis by alkaline-acidic treatments. As a result, silica particles produced with the sizes were ranging at 60-90 nm, determined by high-resolution microscopy. The crystallinity was confirmed by surface area electron diffraction. Apart from that, chemical and diffraction analyses for both rice straw ash and synthesized silica nanoparticles were conducted by X-ray diffraction and Fourier-transform infrared spectroscopy. The percentage of silica from the incinerated straw was calculated to be 28.3. The prominent surface chemical bonding on the generated silica nanoparticles was with Si-O-Si, stretch of Si-O and symmetric Si-O bonds at peaks of 1090, 471, and 780 cm-1, respectively. To confirm the impurities of the elements in the produced silica, were analyzed using X-ray photoelectron spectroscopy and energy dispersive X-ray spectroscopy. The stability of silica nanoparticles was investigated using thermogravimetric analysis and zeta potential. The measured size from zeta potential analysis was 411.3-493 nm and the stability of mass reduction was located at 200 °C with final amount of mass reduced ∼88% and an average polydispersity Index was 0.195-0.224.
Phytase activity and growth of anaerobic rumen bacterium, Mitsuokella jalaludinii were investigated by semi-solid
state fermentation. Carbon source (rice bran, yam and cassava), nitrogen sources (soya bean, offal meal, fish meal and
feather meal) and growth factors (hemin, L-cysteine hydrochloride and minerals) were evaluated in a one-factor-at-atime
approach. Rice bran and fish meal produced better growth and phytase enzyme activity. The removal of L-cysteine
hydrochloride and minerals significantly decreased (p<0.05) phytase activity from 1178.72 U to 446.99 U and 902.54
U, respectively. The response surface methods (RSM) was conducted to optimize the phytase production and the results
showed the combination of 7.7% of rice bran and 3.7% of fish meal in semi-solid state fermentation gave the highest
phytase activity. Maximum phytase production and optimum growth of bacteria were detected at 12 h incubation in both
MF medium (control) and agro-medium. In this agro-medium, M. jalaludinii produced 2.5 fold higher phytase activity
compared to MF medium.
Rice is a carbohydrate, one of the plant-based foods that can accumulate heavy metal from soil and the irrigation water. Since total heavy metal always overestimates the amount of heavy metal available in rice, bioavailability of heavy metal is always preferred. Many studies have been done and found that in vitro methods offer an appealing alternative to human and animal studies. They can be simple, rapid, low in cost and may provide insights which not achievable in the in vivo studies. In vitro digestion model for rice may differ from other in vitro digestion models applied in soil or other type of foods studies. This review aims to provide an overview of in vitro digestion model used to determine bioavailability of heavy metal in rice, summarize health risk assessment application of heavy metal in rice studies and highlight the importance of health risk assessment to be included in the studies. Future exploration of in vitro digestion model and health risk assessment application on the bioavailability of heavy metal in rice was also suggested.
MRQ74, a popular aromatic Malaysian landrace, allows for charging considerably higher prices than non-aromatic landraces. Thus, breeding this profitable trait has become a priority for Malaysian rice breeding. Despite many studies on aroma genetics, ambiguities considering its genetic basis remain. It has been observed that identifying quantitative trait loci (QTLs) based on anchor markers, particularly candidate genes controlling a trait of interest, can increase the power of QTL detection. Hence, this study aimed to locate QTLs that influence natural variations in rice scent using microsatellites and candidate gene-based sequence polymorphisms. For this purpose, an F2 mapping population including 189 individual plants was developed by MRQ74 crosses with 'MR84', a non-scented Malaysian accession. Additionally, qualitative and quantitative approaches were applied to obtain a phenotype data framework. Consequently, we identified two QTLs on chromosomes 4 and 8. These QTLs explained from 3.2% to 39.3% of the total fragrance phenotypic variance. In addition, we could resolve linkage group 8 by adding six gene-based primers in the interval harboring the most robust QTL. Hence, we could locate a putative fgr allele in the QTL found on chromosome 8 in the interval RM223-SCU015RM (1.63cM). The identified QTLs represent an important step toward recognition of the rice flavor genetic control mechanism. In addition, this identification will likely accelerate the progress of the use of molecular markers for gene isolation, gene-based cloning, and marker-assisted selection breeding programs aimed at improving rice cultivars.
When a phenotype of interest is associated with an external/internal covariate, covariate inclusion in quantitative trait loci (QTL) analyses can diminish residual variation and subsequently enhance the ability of QTL detection. In the in vitro synthesis of 2-acetyl-1-pyrroline (2AP), the main fragrance compound in rice, the thermal processing during the Maillard-type reaction between proline and carbohydrate reduction produces a roasted, popcorn-like aroma. Hence, for the first time, we included the proline amino acid, an important precursor of 2AP, as a covariate in our QTL mapping analyses to precisely explore the genetic factors affecting natural variation for rice scent. Consequently, two QTLs were traced on chromosomes 4 and 8. They explained from 20% to 49% of the total aroma phenotypic variance. Additionally, by saturating the interval harboring the major QTL using gene-based primers, a putative allele of fgr (major genetic determinant of fragrance) was mapped in the QTL on the 8th chromosome in the interval RM223-SCU015RM (1.63 cM). These loci supported previous studies of different accessions. Such QTLs can be widely used by breeders in crop improvement programs and for further fine mapping. Moreover, no previous studies and findings were found on simultaneous assessment of the relationship among 2AP, proline and fragrance QTLs. Therefore, our findings can help further our understanding of the metabolomic and genetic basis of 2AP biosynthesis in aromatic rice.
Silicon (Si) is one of the most prevalent elements in the soil. It is beneficial for plant growth and development, and it contributes to plant defense against different stresses. The Lsi1 gene encodes a Si transporter that was identified in a mutant Japonica rice variety. This gene was not identified in fourteen Malaysian rice varieties during screening. Then, a mutant version of Lsi1 was substituted for the native version in the three most common Malaysian rice varieties, MR219, MR220, and MR276, to evaluate the function of the transgene. Real-time PCR was used to explore the differential expression of Lsi1 in the three transgenic rice varieties. Silicon concentrations in the roots and leaves of transgenic plants were significantly higher than in wild-type plants. Transgenic varieties showed significant increases in the activities of the enzymes SOD, POD, APX, and CAT; photosynthesis; and chlorophyll content; however, the highest chlorophyll A and B levels were observed in transgenic MR276. Transgenic varieties have shown a stronger root and leaf structure, as well as hairier roots, compared to the wild-type plants. This suggests that Lsi1 plays a key role in rice, increasing the absorption and accumulation of Si, then alters antioxidant activities, and improves morphological properties.
Drought tolerance is an important quantitative trait with multipart phenotypes that are often further complicated by plant phenology. Different types of environmental stresses, such as high irradiance, high temperatures, nutrient deficiencies, and toxicities, may challenge crops simultaneously; therefore, breeding for drought tolerance is very complicated. Interdisciplinary researchers have been attempting to dissect and comprehend the mechanisms of plant tolerance to drought stress using various methods; however, the limited success of molecular breeding and physiological approaches suggests that we rethink our strategies. Recent genetic techniques and genomics tools coupled with advances in breeding methodologies and precise phenotyping will likely reveal candidate genes and metabolic pathways underlying drought tolerance in crops. The WRKY transcription factors are involved in different biological processes in plant development. This zinc (Zn) finger protein family, particularly members that respond to and mediate stress responses, is exclusively found in plants. A total of 89 WRKY genes in japonica and 97 WRKY genes in O. nivara (OnWRKY) have been identified and mapped onto individual chromosomes. To increase the drought tolerance of rice (Oryza sativa L.), research programs should address the problem using a multidisciplinary strategy, including the interaction of plant phenology and multiple stresses, and the combination of drought tolerance traits with different genetic and genomics approaches, such as microarrays, quantitative trait loci (QTLs), WRKY gene family members with roles in drought tolerance, and transgenic crops. This review discusses the newest advances in plant physiology for the exact phenotyping of plant responses to drought to update methods of analysing drought tolerance in rice. Finally, based on the physiological/morphological and molecular mechanisms found in resistant parent lines, a strategy is suggested to select a particular environment and adapt suitable germplasm to that environment.
Leaf respiration in the dark (Rdark ) is often measured at a single time during the day, with hot-acclimation lowering Rdark at a common measuring temperature. However, it is unclear whether the diel cycle influences the extent of thermal acclimation of Rdark , or how temperature and time of day interact to influence respiratory metabolites. To examine these issues, we grew rice under 25°C : 20°C, 30°C : 25°C and 40°C : 35°C day : night cycles, measuring Rdark and changes in metabolites at five time points spanning a single 24-h period. Rdark differed among the treatments and with time of day. However, there was no significant interaction between time and growth temperature, indicating that the diel cycle does not alter thermal acclimation of Rdark . Amino acids were highly responsive to the diel cycle and growth temperature, and many were negatively correlated with carbohydrates and with organic acids of the tricarboxylic acid (TCA) cycle. Organic TCA intermediates were significantly altered by the diel cycle irrespective of growth temperature, which we attributed to light-dependent regulatory control of TCA enzyme activities. Collectively, our study shows that environmental disruption of the balance between respiratory substrate supply and demand is corrected for by shifts in TCA-dependent metabolites.
This study aims to assess the environmental impacts of conventional and organic rice cultivations and proposes a sustainable conceptual framework of rice farming based on the life cycle assessment (LCA) approach. A cradle-to-gate LCA was performed by using the ReCiPe 2016 method and SimaPro 8.5 software. The functional unit was one ton of rice grains harvested. Primary data were obtained from the farmer, while secondary data were collected from Ecoinvent 3.0, the Agri Footprint 3.0 database and the literature. The total characterization factors for global warming potential (GWP), water consumption potential (WCP) and fossil fuel depletion potential (FFP) were 457.89 kg CO2-eq, 98.18 m3 and 84.56 kg oil-eq, respectively, at the midpoint level for conventional rice, while the impacts for organic rice were 140.55 kg CO2-eq, 29.45 m3 and 22.25 kg oil-eq, respectively. At the endpoint level, the total characterization factors for human health damage (HH), ecosystem damage (ED) and resource availability (RA) for conventional rice were 9.63 × 10-4 DALY, 5.54 × 10-6 species.year and 30.98 Dollar, respectively, while for organic rice, the impacts were 2.60 × 10-4 DALY, 2.28 × 10-6 species.year and 8.44 Dollar, respectively. Rice cultivation impacted the environment, particularly in relation to three impact categories: GWP, WCP and FFP. The cultivation phase of rice production was the main contributor to environmental impacts due to the production and application of fertilizer and pesticides. It can be concluded that the application of LCA in agricultural sector is able to provide information and responses for policy makers in understanding the potential environmental impacts at various spatial levels.
Utilizing agro-waste material such as rice husk (RH) and coco peat (CP) reinforced with thermoplastic resin to produce low-cost green composites is a fascinating discovery. In this study, the effectiveness of these blended biocomposites was evaluated for their physical, mechanical, and thermal properties. Initially, the samples were fabricated by using a combination of melt blend internal mixer and injection molding techniques. Increasing in RH content increased the coupons density. However, it reduced the water vapor kinetics sorption of the biocomposite. Moisture absorption studies disclosed that water uptake was significantly increased with the increase of coco peat (CP) filler. It showed that the mechanical properties, including tensile modulus, flexural modulus, and impact strength of the 15% RH-5% CP reinforced acrylonitrile-butadiene-styrene (ABS), gave the highest value. Results also revealed that all RH/CP filled composites exhibited a brittle fracture manner. Observation on the tensile morphology surfaces by using a scanning electron microscope (SEM) affirmed the above finding to be satisfactory. Therefore, it can be concluded that blend-agriculture waste reinforced ABS biocomposite can be exploited as a biodegradable material for short life engineering application where good mechanical and thermal properties are paramount.
The level of total lipid and oryzanol content, an important antioxidant compound in locally produced bran was investigated. Total lipid in rice bran was extracted using 3:2 chloroform:methanol mixture yielding 16.4% fat. Oryzanol content was determined without saponification using a reverse-phase HPLC. Four fractions of oryzanol were successfully separated and quantitated. The 4 isomers were cycloartenyl ferulate, 24-methylene cycloartanyl ferulate, campestryl ferulate and mixtures of β–sitosteryl ferulate and cycloartanyl ferulate. The oryzanol content of local mixed varieties ranged from 23.7–43.0 mg g-1. The oryzanol concentration may depend on factors such as plant varieties, processing methods employed, extracting solvent used and ratio of extracting solvent to bran as well as extracting solvent temperatures. This study showed the potential of oryzanol extract from rice bran as a source of antioxidant.
Antioxidant activity of different rice extract and the effect on the levels of antioxidant enzyme activity, superoxide dismutase (SOD) and glutathione peroxidase (GPx), vitamin E, lipid peroxidation and liver enzymes in hyperlipidaemia rabbits were investigated. Germinated brown rice (GBR) has the highest antioxidant activity compared to white rice (WR) and brown rice (BR). All rice grains increased the activity of SOD and GPx. However, vitamin E levels increased only in the groups that received the BR and GBR diets. The reduction of lipid peroxidation levels and activity of hepatic enzymes (alanine transferase, ALT and aspartate transaminase, AST) were only significantly observed in the GBR group. In conclusion, GBR supplementation has the greatest impact on increasing antioxidant enzyme activity and vitamin E level and on reducing lipid peroxidation in hypercholesterolaemia rabbit, thereby preventing the formation of atherosclerotic plaques. Furthermore, GBR diet can also reduce the level of hepatic enzymes.
It is imperative that there be a diet designed specifically to improve lipid profile in order to impede the progress of atherosclerosis. Because rice is a staple food in Asia, it will be chosen as the diet of interest. This study sets out to discover whether consumption of different processed rice diets may result in a change of the lipid profile. The experiment was done on male New Zealand white rabbits after 10 weeks of treatment with diet containing 0.5% cholesterol. The experimental diets include white rice (WR), brown rice (BR), and germinated brown rice (GBR). Among them, rabbits fed a GBR diet demonstrated significantly lower levels of total cholesterol (TC), low-density lipoprotein (LDL), LDL/HDL, and atherogenic index (AI) and a higher level of high-density lipoprotein (HDL). Results from atherosclerotic plaque assessment further support the findings. The level of malondialdehyde (MDA), which acts as an indicator for oxidative stress, was also reduced by GBR diet. The positive change in lipid profile in the rabbits fed GBR appeared to correspond with the higher amounts of γ-oryzanol, tocopherol, and monounsaturated fatty acid (MUFA) content.
The effect of scan rate on the accuracy of corrosion parameter in evaluating the efficiency of rice straw extract as corrosion inhibitor has been studied via potentiodynamic polarization measurement. Scan rate in the range of low (0.1- 0.25 mV s-1), medium (0.5-1.0 mV s-1) and high (1.5-2.0 mV s-1) scan were carried out on the carbon steel in 1 M HCl. The corrosion parameters such as corrosion rate, polarization resistance and corrosion current density have been analyzed through Tafel polarization curve. High scan rate gave poor accuracy of corrosion parameter compared to medium and low scan. Medium scan at 1.0 mV s-1 has been chosen as the optimum scan rate due to the approached steady-state and small disturbance of charged current. As a result, the addition of rice straw extract in 1 M HCl has reduced the values of corrosion current density in both cathodic and anodic reactions signified the corrosion has been inhibited. The efficiency of rice straw extracts as a corrosion inhibitor offer good result as much as 86%.