MyMedR

Displaying publications 41 - 60 of 150 in total

Abstract:

Sort:

Assessment of sitting pressure on Malaysian bus drivers

Ahmad Rasdan Ismail, Mohd Afiq Zainal Rosli, Isa Halim, Baba Md. Deros, Mohd Nizam Ab Rahman, Md. Mustafizur Rahman

Journal of Occupational Safety and Health, 2012;9(3):1-9.
MyJurnal

The main purpose of this study was to establish the comfort zone for bus drivers in a seated position. In addition, this study is to investigate the seated pressure distribution among Malaysian bus drivers. The study consists of 10 bus drivers randomly selected to be a part of this study. The FSA pressure mat was utilized in order to investigate the force distribution of buttock to the seat pan of the drivers’ seat. This device is placed on the driver seat and backrest. Later, the subject would sit on for several minute. The finding reveals that most of the bus drivers feel discomfort by having low back pain and musculoskeletal disorder. The seat pressure distribution of Malaysian busses indicated that the seat not able to absorb high pressure generated from buttock that later may cause the discomfort and restricted the performance of drivers.

Matched MeSH terms: Posture
Call center ergonomics issues: A case study

Hari Krishnan, T.

Journal of Occupational Safety and Health, 2012;9(3):17-22.
MyJurnal

Introductions: Call center has been defined as a working environment in which uses telephone and computer for the purpose of marketing and manage communication with prospect clients or existing clients (Rocha, Glina, Morinho and Nakasato, 2005; Sprigg, Smith and Jackson, 2003).
Methodology: The study was conducted via observation of working condition and face to face interview with call center operators. Measurement of anthropometrics was also conducted.
Results: Ergonomics issues found at call center were inappropriate work condition and workstation which lead to awkward sitting posture (sitting with forward leaning posture, raised shoulder, feet not supported on floor). Besides that organizational policy which required high job demand and subsequently lead to prolonged sitting and static posture (very minimal posture changes). Combination all these factors lead to musculoskeletal symptoms and the operators reported of having neck, shoulder, upper back and lower back pain compared to other body parts.
Conclusion: The management should embark on organization wide ergonomics management program and should review the current policy and create safe and healthy working environment by providing suitable workstation for the operators in order to prevent musculoskeletal.

Matched MeSH terms: Posture
Fulltext A cardiovascular mathematical model of graded head-up tilt

Lim E, Chan GS, Dokos S, Ng SC, Latif LA, Vandenberghe S, et al.

PLoS One, 2013;8(10):e77357.
PMID: 24204817 DOI: 10.1371/journal.pone.0077357

A lumped parameter model of the cardiovascular system has been developed and optimized using experimental data obtained from 13 healthy subjects during graded head-up tilt (HUT) from the supine position to [Formula: see text]. The model includes descriptions of the left and right heart, direct ventricular interaction through the septum and pericardium, the systemic and pulmonary circulations, nonlinear pressure volume relationship of the lower body compartment, arterial and cardiopulmonary baroreceptors, as well as autoregulatory mechanisms. A number of important features, including the separate effects of arterial and cardiopulmonary baroreflexes, and autoregulation in the lower body, as well as diastolic ventricular interaction through the pericardium have been included and tested for their significance. Furthermore, the individual effect of parameter associated with heart failure, including LV and RV contractility, baseline systemic vascular resistance, pulmonary vascular resistance, total blood volume, LV diastolic stiffness and reflex gain on HUT response have also been investigated. Our fitted model compares favorably with our experimental measurements and published literature at a range of tilt angles, in terms of both global and regional hemodynamic variables. Compared to the normal condition, a simulated congestive heart failure condition produced a blunted response to HUT with regards to the percentage changes in cardiac output, stroke volume, end diastolic volume and effector response (i.e., heart contractility, venous unstressed volume, systemic vascular resistance and heart rate) with progressive tilting.

Matched MeSH terms: Posture/physiology*
Fulltext Joint association of sitting time and physical activity with metabolic risk factors among middle-aged Malays in a developing country: a cross-sectional study

Chu AH, Moy FM

PLoS One, 2013;8(4):e61723.
PMID: 23613917 DOI: 10.1371/journal.pone.0061723

Prolonged sitting is associated with increased weight and higher risks for abdominal obesity, dyslipidaemia, hyperglycaemia and hypertension among the adult population. This has been well documented in the West, but studies on these associations are lacking in developing countries, including Malaysia.

Matched MeSH terms: Posture/physiology*
Fulltext Venous Air Embolism during Elective Craniotomy for Parasagittal Meningioma

Hassan WMNW, Asmah Z, Saedah A

Med J Malaysia, 2013;68(1):69-70.
PMID: 23466772 MyJurnal

We report a case of a 59 year old man who developed venous air embolism (VAE) during an elective craniotomy for parasagittal meningioma resection. The surgery was done in the supine position with slightly elevated head position. VAE was provisionally diagnosed by sudden decreased in the end tidal carbon dioxide pressure from 34 to 18 mmHg, followed by marked hypotension and atrial fibrillation. Prompt central venous blood aspiration, aggressive resuscitation and inotropic support managed to stabilize the patient. Post operatively, he was admitted in neuro intensive care unit and made a good recovery without serious complications.

Matched MeSH terms: Posture
Spinal cord injury rehabilitation: which way forward?

Karimi M, Omar AH, Fatoye F

NeuroRehabilitation, 2014 Jan 1;35(2):325-40.
PMID: 24990035 DOI: 10.3233/NRE-141124

Spinal cord injury (SCI), damage to spinal cord, influences the ability of the subjects to stand and walk. Moreover, they have some problems such as osteoporosis, muscle spasm, joint contracture and bowel and bladder function. These subjects use various orthoses and undergo different rehabilitation programmes to restore their ability. It is controversial whether use of aforementioned methods improves the physiological health of SCI individuals and improves their ability to ambulate or not. Therefore, the aim of this review was to investigate the effectiveness of assistive devices to restore their physiological health and their functional ability in patients with SCI.

Matched MeSH terms: Posture
Fulltext Balance control in lower extremity amputees during quiet standing: a systematic review

Ku PX, Abu Osman NA, Wan Abas WA

Gait Posture, 2014 Feb;39(2):672-82.
PMID: 24331296 DOI: 10.1016/j.gaitpost.2013.07.006

Postural control has been widely evaluated for the normal population and different groups over the past 20 years. Numerous studies have investigated postural control in quiet standing posture among amputees. However, a comprehensive analysis is lacking on the possible contributing factors to balance. The present systematic review highlights the current findings on variables that contribute to balance instability for lower extremity amputees. The search strategy was performed on PubMed, Web of Science, Medline, Scopus, and CINAHL and then followed by additional manual searching via reference lists in the reviewed articles. The quality of the articles was evaluated using a methodological quality assessment tool. This review included and evaluated a total of 23 full-text articles. Despite the inconsistencies in the methodological design of the studies, all articles scored above the acceptable level in terms of quality. A majority of the studies revealed that lower extremity amputees have increased postural sway in the standing posture. Asymmetry in body weight, which is mainly distributed in the non-amputated leg, was described. Aside from the centre of pressure in postural control, sensory inputs may be a related topic for investigation in view of evidence on their contribution, particularly visual input. Other balance-related factors, such as stump length and patients' confidence level, were also neglected. Further research requires examination on the potential factors that affect postural control as the information of standing postural is still limited.

Matched MeSH terms: Posture/physiology*
Fulltext A fuzzy controller for lower limb exoskeletons during sit-to-stand and stand-to-sit movement using wearable sensors

Reza SM, Ahmad N, Choudhury IA, Ghazilla RA

Sensors (Basel), 2014 Mar 04;14(3):4342-63.
PMID: 24599193 DOI: 10.3390/s140304342

Human motion is a daily and rhythmic activity. The exoskeleton concept is a very positive scientific approach for human rehabilitation in case of lower limb impairment. Although the exoskeleton shows potential, it is not yet applied extensively in clinical rehabilitation. In this research, a fuzzy based control algorithm is proposed for lower limb exoskeletons during sit-to-stand and stand-to-sit movements. Surface electromyograms (EMGs) are acquired from the vastus lateralis muscle using a wearable EMG sensor. The resultant acceleration angle along the z-axis is determined from a kinematics sensor. Twenty volunteers were chosen to perform the experiments. The whole experiment was accomplished in two phases. In the first phase, acceleration angles and EMG data were acquired from the volunteers during both sit-to-stand and stand-to-sit motions. During sit-to-stand movements, the average acceleration angle at activation was 11°-48° and the EMG varied from -0.19 mV to +0.19 mV. On the other hand, during stand-to-sit movements, the average acceleration angle was found to be 57.5°-108° at the activation point and the EMG varied from -0.32 mV to +0.32 mV. In the second phase, a fuzzy controller was designed from the experimental data. The controller was tested and validated with both offline and real time data using LabVIEW.

Matched MeSH terms: Posture/physiology*
Fulltext Development of a decision support system for analysis and solutions of prolonged standing in the workplace

Halim I, Arep H, Kamat SR, Abdullah R, Omar AR, Ismail AR

Saf Health Work, 2014 Jun;5(2):97-105.
PMID: 25180141 DOI: 10.1016/j.shaw.2014.04.002

BACKGROUND: Prolonged standing has been hypothesized as a vital contributor to discomfort and muscle fatigue in the workplace. The objective of this study was to develop a decision support system that could provide systematic analysis and solutions to minimize the discomfort and muscle fatigue associated with prolonged standing.
METHODS: The integration of object-oriented programming and a Model Oriented Simultaneous Engineering System were used to design the architecture of the decision support system.
RESULTS: Validation of the decision support system was carried out in two manufacturing companies. The validation process showed that the decision support system produced reliable results.
CONCLUSION: The decision support system is a reliable advisory tool for providing analysis and solutions to problems related to the discomfort and muscle fatigue associated with prolonged standing. Further testing of the decision support system is suggested before it is used commercially.

Matched MeSH terms: Posture
Fulltext Psycho-behavioural risks of low back pain in railway workers

Ganasegeran K, Perianayagam W, Nagaraj P, Al-Dubai SA

Occup Med (Lond), 2014 Jul;64(5):372-5.
PMID: 24727561 DOI: 10.1093/occmed/kqu039

BACKGROUND:
Low back pain (LBP) is the most costly ailment in the work force. Risky work behaviour and psychological stress are established risk factors.

AIMS:
To explore the associations between workplace risk factors, psychological stress and LBP among Malaysian railway workers.

METHODS:
A cross-sectional study was carried out on railway workers in Malaysia. Socio-demographics, workplace risk factors for LBP, perceived psychological stress and history of LBP over the previous month were obtained by direct interviews using a structured closed-ended questionnaire. Descriptive, bivariate and logistic regression analyses were conducted.

RESULTS:
There were 513 study participants (70% response rate). The prevalence of LBP in the previous month was 69%. Multivariate analysis yielded four significant predictors of LBP: employment of ≥ 10 years, lifting and lowering heavy loads, prolonged standing posture and psychological stress.

CONCLUSIONS:
The high prevalence of LBP and its significant associations with physical and psychological stress factors in railway workers points to an urgent need for preventive measures, particularly among workers in high-risk occupations.

Matched MeSH terms: Posture
The effect of feet position on standing balance in patients with diabetes

Mehdikhani M, Khalaj N, Chung TY, Mazlan M

Proc Inst Mech Eng H, 2014 Aug;228(8):819-23.
PMID: 25205748 DOI: 10.1177/0954411914547714

Feet displacement is recognized to be an important element in standing and is also linked to postural instability in elderly people with diabetes. This study investigates standing balance in diabetic patients in four asymmetric feet displacements. Quiet standing balance was investigated using the Biodex Balance System in 18 diabetic patients and compared with 18 control elderly subjects. The four standing conditions, namely, comfortable feet position, preferred feet position with a stance width of 17 cm and 15° angle between the medial borders, feet side by side, and heel side by side with a 30° angle between medial edges of feet were evaluated (i.e. eyes opened, eyes closed). The overall stability was calculated by measuring anterior-posterior and medial-lateral indices in standing conditions. Differences among feet positions were compared using an analysis of variance and the independent t-test. The diabetic patients were unstable in the medial-lateral direction when standing with feet side by side versus heel side by side with a 30° angle between medial edges of feet (p = 0.012 and 0.011, respectively), while in controls the anterior-posterior stability scores between standing in preferred foot position with stance width of 17 cm and 15° angle between the medial borders versus feet side by side, and heel side by side with a 30° angle between medial edges of feet versus preferred foot position with stance width of 17 cm and 15° angle between the medial borders had significant difference (p

Matched MeSH terms: Posture/physiology*
Fulltext Reliability, agreement, and validity of digital weighing scale with MatScan in limb load measurement

Kumar SN, Omar B, Htwe O, Joseph LH, Krishnan J, Jafarzedah Esfehani A, et al.

J Rehabil Res Dev, 2014;51(4):591-8.
PMID: 25144172 DOI: 10.1682/JRRD.2013.07.0166

Limb loading measurements serve as an objective evaluation of asymmetrical weight bearing in the lower limb. Digital weighing scales (DWSs) could be used in clinical settings for measurement of static limb loading. However, ambiguity exists whether limb loading measurements of DWSs are comparable with a standard tool such as MatScan. A cross-sectional study composed of 33 nondisabled participants was conducted to investigate the reliability, agreement, and validity of DWSs with MatScan in static standing. Amounts of weight distribution and plantar pressure on the individual lower limb were measured using two DWSs (A, B) and MatScan during eyes open (EO) and eyes closed (EC) conditions. The results showed that intra- and interrater reliability (3, 1) were excellent (0.94-0.97) within and between DWS A and B. Bland-Altman plot revealed good agreement between DWS and MatScan in EO and EC conditions. The area under the receiver operating characteristic curve was significant and identified as 0.68 (p = 0.01). The measurements obtained with DWSs are valid and in agreement with MatScan measurements. Hence, DWSs could be used interchangeably with MatScan and could provide clinicians an objective measurement of limb loading suitable for clinical settings.

Matched MeSH terms: Posture
Fulltext Longitudinal, lateral and transverse axes of forearm muscles influence the crosstalk in the mechanomyographic signals during isometric wrist postures

Islam MA, Sundaraj K, Ahmad RB, Sundaraj S, Ahamed NU, Ali MA

PLoS One, 2014;9(8):e104280.
PMID: 25090008 DOI: 10.1371/journal.pone.0104280

In mechanomyography (MMG), crosstalk refers to the contamination of the signal from the muscle of interest by the signal from another muscle or muscle group that is in close proximity.

Matched MeSH terms: Posture/physiology*
Work-related musculoskeletal disorders among assembly workers in Malaysia

Roseni Abdul Aziz, Mat Rebi Abdul Rani, Jafri Mohd Rohani, Ademola James Adeyemi

Journal of Occupational Safety and Health, 2014;11(1):33-38.
MyJurnal

Studies have identified working postures as a major risk factors associated with Work-related musculoskeletal disorders (WMSD) in industries. This study investigated the prevalence of WMSD among assembly workers in Malaysia and how psychosocial factors such as personal values and workers relationship with family and superior are associated with discomfort and pain. A survey was conducted among 127 workers at assembly process in the manufacturing industry. The workers were aged 28.74±6.74 years and 64.6% of them were males. Analysis of Variance (ANOVA) was used to determine the effect of workplace factors on WMSD at different body regions. Spearman’s rank correlation was used to investigate association between psychosocial factors and occurrence of discomfort and pain. Only occupation and job activities revealed any significant different with WMSD in the major body regions while there was no significant difference in gender, age and work duration classifications. Shoulder painis the most prevalent in terms of frequency and intensity of occurrence. Psychosocial issues that have to do with person values, effect of job on family relationship and workers rapport with superiors are all found to be associated with the discomfort and pain among the occupational group. Employers and concerned government agencies need to take more proactive steps in tackling the problem as the occurrence of WMSD will have a significant effect on the overall wellbeing of the working population.

Matched MeSH terms: Posture
Fulltext Association between awkward posture and musculoskeletal disorders (MSD) among assembly line workers in an automotive industry

Anita, A.R., Yazdani, A., Hayati, K.S., Adon, M.Y.

Malaysian Journal of Medicine and Health Sciences, 2014;10(1):23-28.
MyJurnal

Automotive industry in Malaysia is one of the booming industries which encompass the design, development and manufacturing of motor vehicles. However, it has its own setback as the interaction between complex tools, machines, and instruments, coupled with humans as workers pose several health hazards. A cross-sectional study was conducted to determine the prevalence of musculoskeletal disorders (MSD) and the association with awkward posture among automotive assembly line workers. A simple random sampling method was adopted and data were collected based on Standardized Nordic Questionnaire (SNQ) and Rapid Upper Limb Assessment (RULA) method for analysing awkward posture. With a response rate of 83%, a total of 232 assembly line workers with at least one year job tenure participated in this study. The findings revealed that 78.4% of workers reported MSD while the highest percentage of complaints concerned the lower back (50.9%). Three factors were found to be significantly associated with MSD: age (χ2=5.61, p=0.018), job tenure (χ2= 8.26, p=0.004) and awkward posture (χ2= 65.37, p < 0.001). Logistic regression analysis indicated that significant risk factors for MSD symptoms were workers aged ≥ 25 years old (OR= 2.25, 95%CI 1.14-4.46) and those workers with equal and more than three years job tenure (OR= 2.44, 95%CI 1.04-5.63). In addition, workers in the very high and high RULA action level who were 69 times (OR = 69.38, 95%CI 14.51- 331.73) and 12 times (OR = 12.42, 95%CI 5.21-29.58), respectively, also had higher odds of complaints of MSD. The high prevalence of MSD shows that MSD symptoms is a significant problem among automotive assembly line workers while age, job tenure and awkward posture based on RULA action level are the significant factors for MSD. In particular, this study proves that the prevalence of MSD increases as the RULA action level and job tenure increases. Thus, this problem could be reduced by decreasing RULA action level through appropriate ergonomic workstation design and ergonomic training for workers.

Matched MeSH terms: Posture
Analysis of crosstalk in the mechanomyographic signals generated by forearm muscles during different wrist postures

Islam A, Sundaraj K, Ahmad RB, Sundaraj S, Ahamed NU, Ali MA

Muscle Nerve, 2015 Jun;51(6):899-906.
PMID: 25204740 DOI: 10.1002/mus.24454

In this study, we analyzed the crosstalk in mechanomyographic (MMG) signals generated by the extensor digitorum (ED), extensor carpi ulnaris (ECU), and flexor carpi ulnaris (FCU) muscles of the forearm during wrist flexion (WF) and extension (WE) and radial (RD) and ulnar (UD) deviations.

Matched MeSH terms: Posture/physiology*
Effects of two ergonomic improvements in brazing coils of air-handler units

Loo HS, Yeow PH

Appl Ergon, 2015 Nov;51:383-91.
PMID: 26154237 DOI: 10.1016/j.apergo.2015.06.007

The research aims to address the physically loading task and quality and productivity problems in the brazing of coils of air-handler units. Eight operators participated in two intervention studies conducted in a factory in Malaysia to compare the status quo brazing with (1) the use of a new twin-brazing torch that replaced the single-brazing gun and (2) brazing in a sitting position. The outcome measures are related to quality, productivity, monetary costs, body postures and symptoms. After baseline, Interventions I and II were applied for 3 months respectively. The results show a 58.9% quality improvement, 140% productivity increase and 113 times ROI. There was also a reduction in poor work postures e.g. in the raising of the arms and shoulders; bending, twisting and extending of the neck; and bending of left and right wrists, and the back. This research can be replicated in other factories that share similar processes.

Matched MeSH terms: Posture
Issues post-stroke for Muslim people in maintaining the practice of salat (prayer): A qualitative study

Mohamed CR, Nelson K, Wood P, Moss C

Collegian, 2015;22(3):243-9.
PMID: 26552194

BACKGROUND: Muslims throughout the world perform salat (prayer) five times a day; salat involves a person reciting the Holy Qur'an while being in several positions. There are several steps that should be carried out before prayer, including wudhu (ablution) and covering one's awrah (body).
OBJECTIVES: To identify educational needs for stroke patients and their caregivers in Malaysia. Another purpose is to report on the needs identified by stroke patients and their families related to salat.
METHODS: Descriptive qualitative study. Phase 1 involved semi-structured interviews with stroke patients (n = 5), family caregivers (n = 5) and health professionals (n = 12) in Kelantan Malaysia. Phase 2 involved presenting the findings from Phase 1 to the health professionals with the aim of establishing priorities and processes to develop education strategies for stroke patients and their families.
RESULTS: Preparing for and performing salat was challenging for both patient and family carers to do following a stroke. Themes identified were prayer and the meaning of the stroke events for participants, difficulties praying post-stroke, prayer as part of rehabilitation therapy.
CONCLUSION: Providing culturally safe care should include how nurses assess and support patients and their caregivers post stroke to meet their prayer needs. Nurses have a role in discussing with stroke patients and their families how in addition to its spiritual and customary benefits, prayer and for Muslims reciting the Holy Qur'an can have cognitive and rehabilitation benefits, as well as being a source of psychological support for stroke patients.

Matched MeSH terms: Posture*
Position of document holder and work related risk factors for neck pain among computer users: a narrative review

Ambusam S, Baharudin O, Roslizawati N, Leonard J

Clin Ter, 2015 Nov-Dec;166(6):256-61.
PMID: 26794814 DOI: 10.7417/CT.2015.1898

Document holder is used as a remedy to address occupational neck pain among computer users. An understanding on the effects of the document holder along with other work related risk factors while working in computer workstation requires attention. A comprehensive knowledge on the optimal location of the document holder in computer use and associated work related factors that may contribute to neck pain reviewed in this article. A literature search has been conducted over the past 14 years based on the published articles from January 1990 to January 2014 in both Science Direct and PubMed databases. Medical Subject Headings (MeSH) keywords for search were neck muscle OR head posture OR muscle tension' OR muscle activity OR work related disorders OR neck pain AND/OR document location OR document holder OR source document OR copy screen holder.Document holder placed lateral to the screen was most preferred to reduce neck discomfort among occupational typists. Document without a holder was placed flat on the surface is least preferred. The head posture and muscle activity increases when the document is placed flat on the surface compared to when placed on the document holder. Work related factors such as static posture, repetitive movement, prolong sitting and awkward positions were the risk factors for chronic neck pain. This review highlights the optimal location for document holder for computer users to reduce neck pain. Together, the importance of work related risk factors for to neck pain on occupational typist is emphasized for the clinical management.

Matched MeSH terms: Posture
Fulltext Risk factors of musculoskeletal disorders among oil palm fruit harvesters during early harvesting stage

Ng YG, Mohd Tamrin SB, Mohd Yusoff IS, Hashim Z, Deros BM, Abu Bakar S, et al.

Ann Agric Environ Med, 2015;22(2):286-92.
PMID: 26094525 DOI: 10.5604/12321966.1152101

This cross-sectional study intends to investigate the associations of musculoskeletal disorders (MSDs) among foreign labourers on a socio-economic background, occupational exposure, social lifestyle, and postures adopted during harvesting tasks. A total of 446 male respondents (263 FFB cutters; 183 FFB collectors) were studied using an interview-assisted questionnaire. OWAS was used to determine the severity of awkward posture based on videos of harvesting tasks recorded for each respondent. Analysis found that increasingly educated respondents had higher risk of developing MSDs. Shorter daily work duration and longer resting duration appear to increase the risk of neck and shoulder disorders among harvesters, which may be attributable to organizational work design. Awkward posture was a particularly significant risk factor of MSDs among FFB collectors. Among the results of the study, occupational exposure, postures and certain socio-demographic backgrounds explained some, but not all, the risk factor of MSDs among harvesters. An in-depth investigation, preferably a longitudinal study investigating the dynamic of work activities and other risk factors, such as psychosocial risk factors, are recommended.

Matched MeSH terms: Posture

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links