The paper demonstrates the capability of using cockle shells as an adsorbent for phosphorus removal from simulated petrochemical wastewater, focusing on the actual condition of the petrochemical facultative pond. In this study, the physicochemical properties of shell powder were determined, such as the functional groups, surface morphology, crystalline structure, and surface area using FTIR, SEM, EDX, XRD, and BET. It was observed that the optimum conditions for effective phosphorus removal are under the presence of rotational speed (125 rpm), higher dosage (7 g/L), and larger surface area (smaller particle size) of the shell powder. Fine powder achieved up to 52.27% of phosphorus removal after 40 min compared to coarse powder which could only give 16.67% removal. Additionally, calcined shell powder demonstrated a higher phosphorus removal rate, i.e., up to 62.37%, compared to raw shell powders. The adsorption isotherm was studied using Langmuir and Freundlich models, but the isothermal data fit better for the Freundlich model (R2 = 0.9836). Overall, this study has successfully generated a greener and low-cost adsorbent.
The wide application of microalgae in the field of wastewater treatment and bioenergy source has improved research studies in the past years. Microalgae represent a good source of biomass and bio-products which are used in different medical and industrial activities, among them the production of high-valued products and biofuels. The present review focused on greywater treatment through the application of phycoremediation technique with microalgae and presented recent advances in technologies used for harvesting the microalgae biomass. The advantages and disadvantages of each method are discussed. The microbiological aspects of production, harvesting and utilization of microalgae biomass are viewed.
The purpose of this research is to synthesize environmentally friendly nanosorbents for the novel adsorption of diesel range organics (DRO) from contaminated water. Central composite design (CCD) analysis of response surface methodology (RSM) was employed in a model fitting of the variables predicting the adsorption efficiency of Moringa oleifera-functionalized zerovalent iron particles (ZINPs) for the removal of DRO. The effects of the reaction parameters on the response were screened using 24 factorial designs to determine the statistically significant independent variables. A quadratic model predicting the DRO adsorption efficiency of ZINPs with an F value of 276.84 (p value
In pursuit of advancing photocatalysts for superior performance in water treatment and clean energy generation, researchers are increasingly focusing on layered double hydroxides (LDHs) which have garnered significant attention due to their customizable properties, morphologies, distinctive 2D layered structure and flexible options for modifying anions and cations. No review has previously delved specifically into ZnCr and NiCr LDH-based photocatalysts and therefore, this review highlights the recent surge in ZnCr and NiCr-based LDHs as potential photocatalysts for their applications in water purification and renewable energy generation. The structural and fundamental characteristics of layered double hydroxides and especially ZnCr-LDHs and NiCr-LDHs are outlined. Further, the various synthesis techniques for the preparation of ZnCr-LDHs, NiCr-LDHs and their composite and heterostructure materials have been briefly discussed. The applicability of ZnCr-LDH and NiCr-LDH based photocatalysts in tackling significant issues in water treatment and sustainable energy generation is the main emphasis of this review. It focuses on photocatalytic degradation of organic pollutants in wastewater, elucidating the principles and advancements for enhancing the efficiency of these materials. It also explores their role in H2 production through water splitting, conversion of CO2 into valuable fuels and NH3 synthesis from N2, shedding light on their potential for clean energy solutions. The insights presented herein offer valuable guidance for researchers working towards sustainable solutions for environmental remediation and renewable energy generation.
This study investigated the digestive stability of anthocyanins (ACNs) and their interaction with three pectin fractions-water-soluble pectin (WSP), cyclohexanetrans-1,2-diamine tetra-acetic acid-soluble pectin (CSP), and sodium carbonate-soluble pectin (NSP)-in strawberry pulp processed by pasteurization (PS), ultrasound (US), electron beam (EB) irradiation, and high pressure (HP). Compared with the control group, the ACNs content increased to the highest level (312.89 mg/mL), but the retention rate of ACNs in the simulated intestine decreased significantly after US treatment. The monosaccharide compositions indicated that the WSP and CSP possessed more homogalacturonan (HG) domains than the NSP, which contains more rhamngalacturonan-I (RG-I) domains. The microstructure of US-treated pectin was damaged and fragmented. Comprehensive analysis showed that the retention rate of ACNs was closely related to the pectin structure, primarily reflected by the degree of linearity and the integrity of structure. These results revealed the structure-activity relationship between ACNs and pectin during pulp processing.
This study investigates the impact of various chain lengths of hydrophilic polyglycerol fatty acid esters (HPGEs), namely SWA-10D, M-7D and M-10D on protein interactions and their influence on the surface morphology and interfacial properties of low-fat aerated emulsions under different pressures conditions. M-7D and M-10D samples exhibited larger particle sizes, higher ζ-potential and rougher surface compared to SWA-10D sample at 1 % concentration of HPGEs. Consequently, M-7D and M-10D samples demonstrated lower values of G', G'', and higher values tan δ at the oil-water interface as pressure increased, thereby promoting the formation of less viscoelastic structures. M-7D sample, characterized by lower content of α-helix structures, resulted in an observable redshift in the NH and CO groups of the protein. Molecular docking analysis affirmed that M-7D sample exhibited a lower absolute binding energy value, indicating stronger interaction with the protein compared to other samples, ultimately contributing to the unstable interfacial membrane formed.
This work aimed to study an integrated pretreatment technology employing p-toluenesulfonic acid (TsOH)-catalyzed liquid hot water (LHW) and short-time ball milling for the complete conversion of poplar biomass to xylooligosaccharides (XOS), glucose, and native-like lignin. The optimized TsOH-catalyzed LHW pretreatment solubilized 98.5% of hemicellulose at 160 °C for 40 min, releasing 49.8% XOS. Moreover, subsequent ball milling (20 min) maximized the enzymatic hydrolysis of cellulose from 65.8% to 96.5%, owing to the reduced particle sizes and cellulose crystallinity index. The combined pretreatment reduced the crystallinity by 70.9% while enlarging the average pore size and pore volume of the substrate by 29.5% and 52.4%, respectively. The residual lignin after enzymatic hydrolysis was rich in β-O-4 linkages (55.7/100 Ar) with less condensed structures. This lignin exhibited excellent antioxidant activity (RSI of 66.22) and ultraviolet absorbance. Thus, this research suggested a sustainable waste-free biorefinery for the holistic valorization of biomass through two-step biomass fractionation.
Cold plasma (low pressure) technology has been effectively used to boost the germination and growth of various crops in recent decades. The durability of these plasma-treated seeds is essential because of the need to store and distribute the seeds at different locations. However, these ageing effects are often not ascertained and reported because germination and related tests are carried out within a short time after the plasma-treatment. This research aims to fill that knowledge gap by subjecting three different types of seeds (and precursors): Bambara groundnuts (water), chilli (oxygen), and papaya (oxygen) to cold plasma-treatment. Common mechanisms found for these diverse seed types and treatment conditions were the physical and chemical changes induced by the physical etching and the cold plasma on the seeds and subsequent oxidation, which promoted germination and growth. The high glass transition temperature of the lignin-cellulose prevented any physical restructuring of the surfaces while maintaining the chemical changes to continue to promote the seeds germination and growth. These changes were monitored over 60 days of ageing using water contact angle (WCA), water uptake, electrical conductivity, field emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectroscopy (XPS). The vacuum effect was also investigated to separate its effect from cold plasma (low pressure). This finding offers a framework for determining how long agricultural seeds that have received plasma treatment can be used. Additionally, there is a need to transfer this research from the lab to the field. Once the impact of plasma treatment on seeds has been estimated, it will be simple to do so.
Devising of materials that afforded dual applicability in decontamination and pollutant detection were still a towering challenge owing to the increasing flux of discharge toxic contaminants over the years. Herein, the NiFe2O4 nanoparticles-loaded on cube-like SrTiO3 (NiFe2O4/SrTiO3) composite was fabricated by a two-step hydrothermal approach providing remarkable photocatalytic treatment and electrochemical sensing of noxious pollutants in wastewater. The material traits of the fabricated composite were scrutinized by myriad characterization approaches. The NiFe2O4/SrTiO3 hybrid material demonstrated high surface area of 19.81 m2/g, adequate band gap energy of 2.75 eV, and prominent photoluminescence characteristics. In the presence of visible light, the NiFe2O4/SrTiO3 exhibited profound photocatalysis capability to eliminate sewage effluent-bearing chlortetracycline hydrochloride (CTCH) with 88.6% COD removal in 120 min, outperforming other pure materials. Meanwhile, the toxicity examination of effluent, the possible degradation pathway of CTCH and the proposed photocatalysis mechanism were also divulged. More importantly, the glassy carbon electrode was modified with synergized NiFe2O4/SrTiO3 (NiFe2O4/SrTiO3-GCE) was adopted for the precise quantification of Hydrazine (Hz). The NiFe2O4/SrTiO3-GCE obeyed first-order response for the Hz detection within the range of 1-10 mM: cyclic voltametric: limit of detection (LOD) of 0.119 μM with sensitivity of 18.9 μA μM-1 cm-2, and linear sweep voltametric: LOD of 0.222 μM with a sensitivity of 12.05 μA μM-1 cm-2. The stability and interference of modified electrode were also inspected. This work furnished valuable insights to yield a composite with the prominent S-scheme heterojunction system for quenching of charge carrier recombination and consequently contributing to the future realization into the domains of environmental clean-up and toxic chemical detection.
Industrial and urban modernization processes generate significant amounts of heavy metal wastewater, which brings great harm to human production and health. The biotechnology developed in recent years has gained increasing attention in the field of wastewater treatment due to its repeatable regeneration and lack of secondary pollutants. Pseudomonas, being among the several bacterial biosorbents, possesses notable benefits in the removal of heavy metals. These advantages encompass its extensive adsorption capacity, broad adaptability, capacity for biotransformation, potential for genetic engineering transformation, cost-effectiveness, and environmentally sustainable nature. The process of bacterial adsorption is a complex phenomenon involving several physical and chemical processes, including adsorption, ion exchange, and surface and contact phenomena. A comprehensive investigation of parameters is necessary in order to develop a mathematical model that effectively measures metal ion recovery and process performance. The aim of this study was to explore the latest advancements in high-tolerance Pseudomonas isolated from natural environments and evaluate its potential as a biological adsorbent. The study investigated the adsorption process of this bacterium, examining key factors such as strain type, contact time, initial metal concentration, and pH that influenced its effectiveness. By utilizing dynamic mathematical models, the research summarized the biosorption process, including adsorption kinetics, equilibrium, and thermodynamics. The findings indicated that Pseudomonas can effectively purify water contaminated with heavy metals and future research will aim to enhance its adsorption performance and expand its application scope for broader environmental purification purposes.
This study aimed to investigate the role of hydrolysis and guar gum (GG) participation on the emulsification of the duck myofibrillar protein (MP) and the related stability of oil-in-water emulsion in low-salt condition. Emulsions were prepared using one of each or both treatments, and that prepared with trypsin hydrolysis and GG (T-GG) exhibited the highest stability. FTIR analysis confirmed the hydrogen bond interactions between the system components. T-GG treatment improved emulsion properties and decreased oil droplet size. Moreover, CLSM indicated that aggregation of T-GG oil droplets was prevented. Physical stability was assessed such as Turbiscan stability index, creaming index, and rheological properties. The adsorbed percentage for T-GG was the lowest. However, interfacial tension, droplet size, stability, and peroxide value analyses indicated that a denser interfacial membrane structure is formed with T-GG. Thus, T-GG treatment could be applied in the food industry, such as in nutrient delivery systems and fat mimetics.
Aquaporin is a water channel protein that facilitates the movement of water across the cell membrane. Aquaporin from the Antarctic region has been noted for its psychrophilic properties and its ability to perform at a lower temperature but there remains limited understanding of the water mechanism of Antarctic Pseudomonas sp. strain AMS3 However, studies regarding aquaporin isolated from psychrophilic Pseudomonas sp. are still scattered. Recently, the genome sequence of an Antarctic Pseudomonas sp. strain AMS3 revealed a gene sequence encoding for a putative aquaporin designated as AqpZ1 AMS3. In this study, structure analysis and a molecular dynamics (MD) simulation of a predicted model of a fully hydrated aquaporin tetramer embedded in a lipid bilayer was performed at different temperatures for structural flexibility and stability analysis. The MD simulation results revealed that the structures were able to remain stable at low to medium temperatures. The protein was observed to have high flexibility in the loop region as compared to the helices region throughout the simulated temperatures. The selectivity filter and NPA motifs play a major role in solute selectivity and the pore radius of the protein. The structural and functional characterization of this psychrophilic aquaporin provides new insights for the future applications of this protein.Communicated by Ramaswamy H. Sarma.
This study optimized subcritical water extraction (SWE) conditions to maximize pectin yield from cocoa pod husk (CPH) and compared the characteristics of CPH pectin extracted through SWE with those of CPH pectin obtained through conventional extraction (CE) with citric acid. The Box-Behnken experimental design was employed to optimize SWE and examine the influence of process parameters, including temperature (100 °C-120 °C), extraction time (10-30 min), and solid:liquid ratio (SLR) (1:30-2:30 g/mL), on pectin yield. The maximum pectin yield of 6.58% was obtained under the optimal extraction conditions of 120 °C for 10 min with 1:15 g/mL SLR and closely corresponded with the predicted value of 7.29%. Compared with CE, SWE generated a higher yield and resulted in a higher degree of esterification, methoxyl content, and anhydrouronic acid value but a lower equivalent weight. The extracted pectin was pure, had low-methoxyl content, and similar melting and degradation temperatures.
In this study, mannitol-functionalized magnetic nanoparticles (MMNPs) as a unique nanosorbent and N-doped fluorescent carbon dots (N-CDs) as a cost-effective nanosensor were created and utilized, for the first time, for dispersive micro-solid-phase extraction (Dµ-SPE) to determine carmine (E120) dye in water samples and juices. The modification of the magnetic nanoparticles with mannitol was designed to enhance the responsive potential for adsorption of the polar E120 dye from complex sample matrices through electrostatic interaction. The as-fabricated N-CDs fluorescent probe exhibited a high fluorescence quantum yield (Φs) of 43.1 %, allowing for accurate fluorometric detection of E120 dye. The as-synthesized MMNPs nanosorbent and fluorescent N-CDs nanoprobe were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), thermogravimetric analysis (TGA), and vibrating-sample magnetometer (VSM). Density functional theory (DFT) studied the E120 dye structure using Gaussian 09 to explore the interactions between E 120 dye molecules and MMNPs/N-CDs. The impact of the critical adsorption and detection experimental factors was investigated and adjusted. A minimal amount of MMNPs nanosorbent (150 mg) is sufficient for E120 extraction in an acceptable time of 15 min. Furthermore, with a high determination coefficient, the adsorption characteristics fit with the models of Langmuir isotherm and first-order kinetics. The maximum adsorption capacity (qm) of the as-fabricated MMNPs was 87.7 mg.g-1. After adsorption, E120 dye was fluorometrically analyzed using nitrogen-doped carbon dots as a fluorescent nanosensor via the inner filter effect (IFE) mechanism. Under the optimized conditions, the proposed fluorometric procedures showed a linear increase in the fluorescence ratio with increasing the E120 concentration in the range of 1.0 - 160.0 μg.mL-1 with detection (LOD) and quantitation (LOQ) limits of 0.27 and 0.83 μg.mL-1, respectively. The relative standard deviation (%RSD) did not exceed 2.34 %. The proposed methodology was successfully applied to determine E120 dye in juice and environmental water samples with % recovery ranged from 89.2-106.1 % and 92.9-107.2 %, respectively offering a reliable and environmentally friendly alternative to traditional detection methods with potential applications across various industries.
With the encroaching issue of water pollution, the use of involved chemicals to remove pollutants from water is not only a risk of chemical contamination, a potential hazard to the environment and human health but also requires significant investment in managing and improving the chemicals. Therefore, alginate as one of the nanomaterial-adorned polysaccharides-based entity that usually extract from brown algae has been used as novel and more efficient catalysts in the removal of a variety of aqueous pollutants from wastewater, including ionic metals and organic/inorganic pollutants by using the adsorption techniques. Adsorption is a technique used in water treatment where non-polar or particles less soluble in water are stuck to the surface of the adsorbent and therefore purifying it. An example of pollutant typically removed via this method is an organic dye. Alginate-based composites due to their ability to bind to metals like Cd, Au, Cu, Fe, Ni, Pb, and Zn, are a common low-cost and highly effective adsorbents used to remove heavy metals, industrial paints, pesticides, and antibiotics. This review focusses on augmenting the recent status, challenges, and further prospects in alginate-based materials for their potential role exclusively in wastewater treatment, including their modification as adsorbents and their adsorption behaviors. Various applications of alginate-based adsorbent are showcased and tabulated their role in treatment of diverse range of pollutants. It can be concluded that the role of alginate in wastewater treatment is indispensable in the future with its biodegradability, low cost, stability, and high-water permeability properties. However, some challenges need to be identified and overcome to ensure the application of alginate in wastewater treatment can be widely used throughout the world, especially in Malaysia, a country with an abundance of water.
Dendrobium officinale polysaccharide (DOP), a natural hydrocolloid derived from polysaccharides, holds significant promise for enhancing the quality of frozen dough-based products. This research systematically examined the effects of DOP on the quality attributes of both frozen dough and the resulting bread throughout the period of frozen storage. Findings demonstrated that DOP enhanced thermal stability and slowed starch retrogradation. Dough containing 1.2 % DOP showed increased water absorption (68.63 ± 0.21 %), extended development time (8.63 ± 0.25 min), and decreased stability time (9.33 ± 0.06 min), along with diminished gluten strength and gelatinization viscosity. Moreover, higher concentrations of DOP markedly inhibited water migration, curtailed the rise in freezable water content, and reduced moisture loss during frozen storage (p water, forming hydrogen bonds, which prevented the formation and growth of large ice crystals, thereby reducing deterioration of the microstructure and rheological properties of the frozen dough. Bread produced from DOP-enriched frozen dough exhibited improved baking performance, including enhanced textural properties, specific volume, slice structure, and color, particularly with higher concentrations of DOP. Consequently, DOP can serve as a natural enhancer to prevent the degradation of frozen dough quality.
To maintain the versatility of a hydrogel, extensive modifications are necessary, particularly to overcome the daunting mechanical trait of this material. In agriculture especially, achieving the desired balance between strength and high water absorption ability with this polymer is a significant challenge. Therefore, this study used and evaluated both carboxymethyl cellulose (CMC) mesofiber (CMCF) and CMC-chitosan mesofiber (CMC/CHF) as a reinforcing agent at varying concentrations in the widely known regenerated cellulose hydrogel. These fibers were fined and revamped as mesofiber before being integrated into the cellulose solution for crosslinking and formation stages. The hydrogel filled with 2 wt% mesofiber, especially CMC/CHF exhibited the highest storage modulus value (3300 Pa), compression strength (0.315 MPa), and thermal stability, showing the resistivity of this composite towards external pressure. Morphologically, the distribution of smaller pores within the mesofiber-reinforced hydrogel improved along with the water absorption ability. The composite hydrogels, however, demonstrated lower transparency compared to the plain hydrogel due to the high loading of CMCF and complex CMC/CHF. The utilization of CMC/CHF is especially successful and effective in enhancing the resulting composite's mechanical strength and hydrophilicity. Thus, it is expected to be beneficial as a planting medium that provides both functionality and vitality.
The potential of three submerged aquatic plant species (Cabomba piauhyensis, Egeria densa, and Hydrilla verticillata) to be used for As, Al, and Zn phytoremediation was tested. The plants were exposed for 14 days under hydroponic conditions to mine waste water effluents in order to assess the suitability of the aquatic plants to remediate elevated multi-metals concentrations in mine waste water. The results show that the E. densa and H. verticillata are able to accumulate high amount of arsenic (95.2%) and zinc (93.7%) and resulted in a decrease of arsenic and zinc in the ambient water. On the other hand, C. piauhyensis shows remarkable aluminium accumulation in plant biomass (83.8%) compared to the other tested plants. The ability of these plants to accumulate the studied metals and survive throughout the experiment demonstrates the potential of these plants to remediate metal enriched water especially for mine drainage effluent. Among the three tested aquatic plants, H. verticillata was found to be the most applicable (84.5%) and suitable plant species to phytoremediate elevated metals and metalloid in mine related waste water.
To develop a novel granular adsorbent to remove arsenic and antimony from water, calcined Mg/Al-layered double-hydroxide (CLDH)-incorporated polyethersulfone (PES) granular adsorbents (PES-LDH) were prepared using a core-shell method having 25% PES in an N,N-dimethylformamide solution. The PES-LDH displayed a spherical hollow shape having a rough surface and the average particle size of 1-2 mm. On the PES-LDH surface, nanosized CLDH (100-150 nm) was successfully immobilized by consolidation between PES and CLDH. The adsorption of Sb(V) by PES-LDH was found to be more favorable than for As(V), with the maximum adsorption capacity of As(V) and Sb(V) being 7.44 and 22.8 mg/g, respectively. The regeneration results indicated that a 0.5 M NaOH and 5 M NaCl mixed solution achieved an 80% regeneration efficiency in As(V) adsorption and desorption. However, the regeneration efficiency of Sb(V) gradually decreased due to its strong binding affinity, even though the PES-LDH showed much higher Sb(V) adsorption efficiency than As(V). This study suggested that PES-LDH could be a promising granular adsorbent for the remediation of As(V) and Sb(V) contained in wastewater.
Environmental exposure to active pharmaceutical ingredients (APIs) can have negative effects on the health of ecosystems and humans. While numerous studies have monitored APIs in rivers, these employ different analytical methods, measure different APIs, and have ignored many of the countries of the world. This makes it difficult to quantify the scale of the problem from a global perspective. Furthermore, comparison of the existing data, generated for different studies/regions/continents, is challenging due to the vast differences between the analytical methodologies employed. Here, we present a global-scale study of API pollution in 258 of the world's rivers, representing the environmental influence of 471.4 million people across 137 geographic regions. Samples were obtained from 1,052 locations in 104 countries (representing all continents and 36 countries not previously studied for API contamination) and analyzed for 61 APIs. Highest cumulative API concentrations were observed in sub-Saharan Africa, south Asia, and South America. The most contaminated sites were in low- to middle-income countries and were associated with areas with poor wastewater and waste management infrastructure and pharmaceutical manufacturing. The most frequently detected APIs were carbamazepine, metformin, and caffeine (a compound also arising from lifestyle use), which were detected at over half of the sites monitored. Concentrations of at least one API at 25.7% of the sampling sites were greater than concentrations considered safe for aquatic organisms, or which are of concern in terms of selection for antimicrobial resistance. Therefore, pharmaceutical pollution poses a global threat to environmental and human health, as well as to delivery of the United Nations Sustainable Development Goals.