Displaying publications 41 - 60 of 149 in total

Abstract:
Sort:
  1. Hambali, A., Sapuan, S.M., Ismail, N., Nukman, Y., Abdul Karim, M.S.
    MyJurnal
    Nowadays, Concurrent Engineering (CE) is becoming more important as companies compete in the worldwide market. Reduced time in product development process, higher product quality, lower cost in manufacturing process and fulfilment of customers’ requirements are the key factors to determine the success of a company. To produce excellent products, the concept of Concurrent Engineering must be implemented. Concurrent Engineering is a systematic approach which can be achieved when all design activities are integrated and executed in a parallel manner. The CE approach has radically changed the method used in product development process in many companies. Thus, this paper reviews the basic principles and tools of Concurrent Engineering and discusses how to employ them. Similarly, to ensure a product development process in the CE environment to run smoothly and efficiently, some modifications of the existing product development processes are proposed; these should start from market investigation to detail design.
    Matched MeSH terms: Biological Processes
  2. Mohd. Sanusi Che Kadir, Jamaliah Md. Jahim, Nurina Anuar, Mohd. Sobri Takrif, Zahira Yaakub
    MyJurnal
    In this study, an anaerobic mesophilic bacterial strain, namely Clostridium butyricum KBH1, was isolated from a natural source. This strain grew well and produced biogas with an average hydrogen concentration of 60% (v/v) in the Reinforced Clostridial Media (RCM). To study the basic nutrient requirements, three main nutrients namely peptone (Pep), yeast extracts (Yes) and glucose (Glu) were chosen as factors, using an experimental design. The experiments were run according to 23 Full Factorial Design, followed by the Response Surface Method (RSM). The fermentation was performed in 30 ml serum bottles with 20 ml working volume in a sterile and anaerobic condition at 37°C with 5% inoculums. The results from the Analysis of Variance (ANOVA) for the factorial design showed that all the three factors had significantly affected the gas production by the C. butyricum. The response surface plot of the gas production by C. butyricum showed that the gas production could be enhanced by increasing peptone and yeast extract concentrations up to 15 g/l and 24 g/l respectively, without showing any substrate inhibition. Meanwhile, the glucose concentration showed an optimum at the middle point (8 g/l) with possible substrate inhibition at a high concentration (12 g/l). The total biogas production could be correlated to the three factors, using the quadratic equation: Gas =0.17 + 7.11Glu - 0.02Pep + 0.77Yes - 0.53Glu2 + 0.09Glu*Pep. The experimental results showed that the strain could grow well in substrate with high organic nitrogen content such as POME and might be not suitable for substrate with high sugar content due to substrate inhibition.
    Matched MeSH terms: Biological Processes
  3. Nozieana Khairuddin, Ida Idayu Muhamad
    MyJurnal
    An antimicrobial (AM) Active Packaging can be made by incorporating and immobilizing suitable AM agents into food package matrices and applying a bio switch concept. A starchbased film was prepared and incorporated with an antimicrobial agent, i.e. lysozyme with EDTA as a chelating agent. This film was then inoculated with the bacteria Escherichia coli and Bacillus subtilis to carry out the microbial contamination study. The inhibition of both E. coli and B. subtilis by the AM film was clearly observed as a clear zone formation in the culture agar test. The film appearance showed that lysozymes could give a better inhibition to the growth of E. coli and to B. subtilis, at a satisfying inhibition rate. From the broth test, the decreased in the optical densities were found to be 65.83% and 91.30%, suggesting an effective growth inhibition of E. coli and B. subtilis, respectively. Physically, the film which was incorporated with lysozymes was found to be slightly different from the control film. The moisture content of the film, with lysozymes, was found to be below 10.5%, as compared to the control, after 24 hours of formation in the storage at ambient temperature.
    Matched MeSH terms: Biological Processes
  4. Ngoh, Gek Cheng, Masitah Hasan, Kumoro, Andri Chahyo, Chew, Fui Ling, Tham, Margaret
    MyJurnal
    The production of ethanol, from glucose in batch and fed batch culture, was investigated. In the fed batch culture, the glucose feeding was added into the culture at 16th hour of fermentation. The effects of different glucose concentration feeding rates on ethanol fermentation were investigated for fed batch culture. The 2gL-1hr-1 glucose concentration feeding rate was found to give higher ethanol yield (2.47 g ethanol g glucose-1), with respect to substrate consumed as compared to 8 gL-1hr-1 (0.23 g ethanol g glucose-1) and 4 gL-1hr-1 (0.20 g ethanol g glucose-1). The ethanol yield with respect to substrate consumed obtained in batch culture was 0.81 g ethanol g glucose-1. The fed batch culture at 2 gL-1hr-1 glucose concentration feeding rate was proven to be a better fermentation system than the batch culture. The specific growth rate, specific glucose consumption rate and specific ethanol production rate for the fed batch fermentation, at 2 gL-1hr-1 glucose concentration feeding rate, were 0.065 hr-1, 1.20 hr-1 and 0.0009 hr-1, respectively.
    Matched MeSH terms: Biological Processes
  5. Sockalingam, S. Nagarajan M.P., Alida Mahyuddin
    MyJurnal
    Complicated crown-root fractures are rare and often need complex treatment planning. This paper describes a simplified treatment option for a complicated crown root fracture that minimally encroached into the biologic region in a growing child without the need for surgery or orthodontic treatment.
    Matched MeSH terms: Biological Processes
  6. Mohd. Azam Mohd. Adnan, Cheong, K.Y., Hutagalung, Sabar D.
    MyJurnal
    Silicon nanowires were synthesized on Si substrates (111) via thermal evaporation using AuPd thin layer catalyst. Pre cleaned of Si wafer was used as a substrate to assemble the nanostructure products. In this work, the effect of growth temperature that ranging from 800 to 1000°C on the formation of silicon nanowires studied extensively. X-ray diffraction and field emission scanning electron microscope were employed to characterize the structures and morphology of nanowires. Vertical aligned silicon nanowires have been successfully grown on Si substrates at 900 and 1000°C. At 1100°C, the high aspect ratio of silicon nanowires can be produced but the formation density is low. The presence of AuPd catalyst on the tip of nanowires, it is expected that VLS is the most suitable to explain the growth mechanism of obtained SiNWs. The crystalline structure of SiNWs was proved by XRD data.
    Matched MeSH terms: Biological Processes
  7. Yong HT, Son R
    MyJurnal
    Hepatitis A virus infection occurs globally and is causing a public health concern, primarily in developing countries due to its persistent circulation in the environment. The improved sanitary condition and increase in awareness of personal hygiene have led to the marked reduction of HAV prevalence in industrialized countries during childhood and to a shift of the infection towards adulthood. HAV is an environmentally stable, positive single stranded RNA virus that is primarily transmitted by the fecal-oral route, person to person contact or ingestion of contaminated food and drink. One of the main causes leading to HAV infection is epidemiologically linked to the consumption of raw or undercooked shellfish particularly oysters and clams. Due to their filter-feeding style, these shellfishes readily concentrate viruses from the surrounding water containing municipal sewage, and as a consequence pose a health threat to consumers. Therefore, development of detection techniques possessing the requisite sensitivity and specificity for the practical routine monitoring purposes is of great importance necessary for the protection of shellfish-consuming public. Nucleic acid based method such as reverse transcription PCR has emerged as the popular method of choice in view of its rapidity, accuracy and
    sensitivity in contrary of the time-consuming conventional cell culture and hybridization techniques. However, detection of hepatitis A virus is firstly hampered by the non-cytophatic effect of wild type HAV strain, secondly, the low concentration of viral genome present in the environmental sample which requires effective isolation and concentration of virions and lastly the labor-extensive purification and thorough removal of the abundance of the PCR inhibitors which will unfavorably reduce the efficiency of PCR detection.
    Matched MeSH terms: Biological Processes
  8. Kundabala, M., Shetty, Neeta, Parolia, Abhishek
    Malaysian Dental Journal, 2010;31(2):94-0.
    MyJurnal
    Tissue regeneration is a rapidly growing field providing a beacon of hope in the field of restorative and endodontics. Root canal treatment involves the removal of pulp tissue and replacement by an inorganic materials where as regenerative endodontics deals with replacement with healthy pulp to revitalize the teeth .Research in the field of tissue engineering and material science have lead to significant progress but still is plague with lots of drawbacks and failures, hence it is still not being adapted as routine clinical procedures .The purpose of this article is to review the advances made in regenerative endodontics and the future scopes.
    Matched MeSH terms: Biological Processes
  9. Ariff, A.B., Ooi, T.C., Shamsuddin, Z.H., Halimi, M.S.
    MyJurnal
    The exponential fed-batch cultivation of Bacillus sphaericus UPMB10 in 2 l stirred tank fermenter was performed by feeding the initial batch culture with 14 g l-1 of glycerol according to the algorithm aimed at controlling the specific growth rate (μ) of the bacterium. Very high viable cell count (1.14 x 1010 cfu ml-1), which was four times higher as compared to batch cultivation, was achieved in the fed-batch with a controlled μ at 0.4 h-1. In repeated exponential fed-batch cultivation, consisting of four cycles of harvesting and recharging, a final cell concentration of 1.9 x 1011 cfu ml-1 was obtained at the end of the fourth cycle (46 h). Meanwhile, acetylene reduction of cell samples collected from repeated fed-batch cultivation remained unchanged and was maintained at around 20 nmol C2H2 h-1 ml-1 after prolonged cultivation period, and was comparable to those obtained in batch and exponential fed-batch cultivation. Glycerol could be used as a carbon source for high performance cultivation of B. sphaericus, a nitrogen fixing bacterium, in repeated fed-batch cultivation with high cell yield and cell productivity. The productivity (0.68 g l-1 h-1) for repeated fed-batch cultivation increased about 6 times compared to that obtained in conventional batch cultivation (0.11 g l1 h-1). A innovative method in utilizing glycerol for efficient cultivation of nitrogen fixing bacterium could be beneficial to get more understanding and reference in manipulating the integrated plans for sustainable and profitable biodiesel industry.
    Matched MeSH terms: Biological Processes
  10. Mohd Ashraf Ahmad, Zaharuddin Mohamed
    MyJurnal
    This paper presents investigations into the development of control schemes for end-point vibration
    suppression and input tracking of a flexible manipulator. A constrained planar single-link flexible manipulator is considered and the dynamic model of the system is derived using the assumed mode method. To study the effectiveness of the controllers, a Linear Quadratic Regulator (LQR) was initially developed for control of rigid body motion. This is then extended to incorporate a noncollocated PID controller and a feedforward controller based on input shaping techniques to control vibration (flexible motion) of the system. For feedforward controller, positive and modified specified negative amplitude (SNA) input shapers are proposed and designed based on the properties of the system. Results from the simulation of the manipulator responses with the controllers are presented in time and frequency domains. The performances of the control schemes are assessed in terms of level of vibration reduction, input tracking capability and time response specifications. Finally, a comparative assessment of the control techniques is presented and discussed.
    Matched MeSH terms: Biological Processes
  11. Yeoh, S.J., Taip, F.S., Endan, J., Talib, R.A., Sita Mazlina, M.K.
    MyJurnal
    Aquaculture is a growing industry with a great potential towards the contribution of the country’s total
    fish requirement. Serious efforts have been done to develop and improve the production of fish by rearing high value fish in tanks or ponds. Under the Third National Agricultural Policy (1998-2010), the target is to annually produce 1.93 million tonnes of fish worth approximately RM8.3 billion by the year 2010. Consequently, the development of an automatic fish feeding machine can be very beneficial to the growth of the aquaculture industry. This device was developed to overcome labour problems in the industry and introduce a semi-automatic process in the aquaculture industry. It has the ability to dispense dried fish food in various forms such as pellets, sticks, tablets or granules into fish tanks or ponds in a controlled manner for a stipulated time. The automatic fish feeder is controlled by a digital timer and it is capable of feeding the fish in accordance with a pre-determined time schedule without the presence of an operator, and at a feeding rate of 250g/min. The feeder can be adjusted to the desired height and conveniently moved around to be positioned adjacent to the pond or tank. Meanwhile, its hopper can be covered and easily dissembled to change the size of the hopper to accommodate different capacities of feed. This automatic fish feeder can be implemented in aquaculture system to convenience to fish culturists.
    Matched MeSH terms: Biological Processes
  12. Jeyaletchumi, P., Tunung, R., Margaret, S.P., Son, R., Ghazali, F.M., Cheah, Y.K., et al.
    MyJurnal
    The aim of this study was to assess the most probable number-polymerase chain reaction (MPNPCR) technique for detection of Listeria monocytogenes in salad vegetables in comparison with reference EN ISO 11290-2 and Food Drug Administration Bacteriological Analytical Manual method using artificial and naturally contaminated samples. Based on recovery of L. monocytogenes from artificially contaminated samples, MPN-PCR showed a moderate correlation (R=0.67) between spiking concentration and microbial levels which was better than the FDA-BAM method (R=0.642) and ISO 11290-2:1998 method (R=0.655). With naturally contaminated samples, it was found that L. monocytogenes was detected in 25% of the vegetable samples using MPN-PCR; 15% of the samples by the FDA-BAM method and 8% of samples using ISO 11290-2:1998 method. Overall, MPN-PCR was found to be a rapid and reliable method that could facilitate the enumeration of L. monocytogenes in vegetables.
    Matched MeSH terms: Biological Processes
  13. MyJurnal
    This research was carried out to determine the fructooligosaccharides content in local honey samples, namely the wild Malaysian Tualang honey and common wild honey obtained from Tapah, Perak and a commercial Tualang honey. Local wild honeys were found to contain a higher concentration of fructooligosaccharides (FOS) compared to the commercial Tualang honey. The FOS quantified from local wild honeys was inulobiose, kestose and nystose. Nystoses were found at a very low amount in the commercial Tualang honey. The effects of honey on the growth of Bifidobacterium longum BB 536 were investigated. Both wild and commercial honey samples including FOS standard were found to support the growth of B. longum. The pH value of the skim milk + honey inoculated with the probiotic strain decreases as expected. Addition of honey was found to support the growth of B. longum BB 536.
    Matched MeSH terms: Biological Processes
  14. Marhani, M., Ruzanna, Z., Raynuha, M., Ang, J.K.
    MyJurnal
    Living with borderline personality disorder (BPD) involves a lot of emotional suffering which may be hidden behind the complex and controversial nature of the condition and treatment. The condition is still largely under-diagnosed, undertreated and stigmatized. This paper described the emotional battle faced by a patient living with the disorder and the application of psychosocial treatments in helping her to recover.
    Matched MeSH terms: Biological Processes
  15. MyJurnal
    This short report aims to describe the Circle of Care (COC) Project in Malaysia. This is an example of smart partnership between the Malaysian Psychiatric Association (MPA) and Johnson and Johnson which began in 2003. By means of philanthropic funds from an industrial company, many people have benefited in many different aspects through the project. It consists of three main psychosocial activities: education and support programme for carers and families of people with mental illness; psychosocial rehabilitation for patients with mental illness; and mass education for the people in promoting mental health and prevention of mental health problems and illness. To date, the project has either fully or partially funded hundreds of activities along the line of these three objectives. While there has been growth of psychosocial interventions in the country contributed by the project, it is faced with a few challenges which are becoming the next focus of actions of MPA.
    Matched MeSH terms: Biological Processes
  16. Tan AK, Faridah Hanom A
    Malays Fam Physician, 2010;5(3):115-118.
    PMID: 25606202 MyJurnal
    To describe a quick and simple diagnostic approach to monocular diplopia. Diplopia is a common visual complain in casualty departments, general practice clinics, neurologic clinics as well as ophthalmic clinics. Monocular diplopia, however, is uncommon. Many well established clinical examination methods are available to address diplopia. Some require special equipments which are not easily available or unfamiliar outside of ophthalmic clinic. We describe a simple two-minute diagnostic approach to monocular diplopia. Basic knowledge and understanding of simple clinical examination techniques enhances diagnostic skill and allow proper localization of underlying disorders.
    Matched MeSH terms: Biological Processes
  17. Zaini Hamzah, Siti Afiqah Abdul Rahman, Ahmad Saat, Siti Shahrina Agos, Zaharudin Ahmad
    MyJurnal
    The presence of 226 Ra in water is a great concern in human life since it can cause health risk to a certain extent. In the state of Kelantan, being known of its granitic area, there is a lack measurement of 226 Ra content in river water, since water is the major source of water supply. According to the INTERIM National Water Quality Standards for Malaysia (INWQS), 226 Ra activity concentration in water cannot exceed 0.1 Bq/L. For this reasons, this research was planned to carry out a systematic measurement of water along Sungai Kelantan. Liquid Scintillation Counting was used for measurement of 226 Ra in water samples from Sungai Kelantan mainly in district of Kuala Krai. In this paper, the results obtained is about 26 water samples, filtered and unfiltered, collected along Sungai Lebir, Sungai Sok and Bukit Sabah. Thus, the assessment activity concentration of 226 Ra in river water was obtained as well as annual effective dose for consumption of drinking water.
    Matched MeSH terms: Biological Processes
  18. MyJurnal
    Aimed of this study was to determine the presence of Vibrio cholerae in cockles (Anadara granosa)
    from different coasts in Malaysia and to measure the biosafety of V. cholerae in raw cockles at wet market in Malaysia using the polymerase chain reaction (PCR) in combination with the most probable number (MPN) method. A total of 100 samples from 4 different wet markets in the West and East were examined for the presence of V. cholerae. The prevalence of V. cholerae between the two coasts was not significant different. In fact, the 74% of samples from West coast area was found positive while the 69% for samples collected in the East coast. West coast samples showed a prevalence of 60% for the wet market A=, 64% for B=, 88% for C= and 84% for the market D); East coast samples showed the same percentage with 72% for the wet markets E, F and H, followed by wet market G with 60%.With the MPN-PCR method, using 80 samples of raw cockles obtained from 4 wet markets, the occurrence of V. cholerae detected was of 95%. The frequency of V. cholerae in raw cockles obtained from wet market I and L was higher (100%) compared to other wet market (Wet market B=, 90%; Wet market C=, 95%).The density of V. cholerae detected in all samples ranged from 24000 MPN/g, but most of the samples (24 samples) were in category >24000 MPN/g concentration. V. cholerae was present in raw cockles in higher number. Hence, these results demonstrate the presence of pathogenic V.cholerae in cockles harvested and reveal the potential risk of illness associated with their consumption. This study will be the first biosafety assessment of V. choleare in raw cockles in Malaysia and it will provide significant insights about Malaysian scenario.
    Matched MeSH terms: Biological Processes
  19. Loh, S.Y.
    JUMMEC, 2010;13(1):33-37.
    MyJurnal
    As women with breast cancer are living longer, issues beyond survivorship like the much neglected sexual functioning and issue of quality of life have become increasingly important. Experiences of significant alterations in sexual functioning need to be addressed. However, these sexual issues are often not acknowledged in our traditional medical model of health care delivery. This paper briefly reviews the changes in sexual functioning after a diagnosis of breast cancer, with implication for clinical practice and medical curicula.
    Matched MeSH terms: Biological Processes
  20. Johari J.A., Jasmi Y.
    MyJurnal
    Population growth and rise in per capital income have influenced the demand for convenience foods and a meat protein-rich diet. The per capital consumption of beef which had increased from 3.89 kg in 1980 to 5.49 kg in 2006 (DVS, 2006/2007) had resulted in an increased in demand for beef at the rate of 6.2% annually. The local beef production although recorded a 2.5% increased over the last 10 years, is still unable to meat the increasing national demand for beef. In 2008, local production of beef is about 38,250 mt. could only meet about 26.7% of the national demand (DVS, 2008). The gap between supply and demand for beef is expected to widen in the next decades unless efforts is been made to accelerate local production. The lack of number of quality breeding stocks and unorganized breeding system had been the major factors that contribute to the slow growth of the local beef industry.
    Matched MeSH terms: Biological Processes
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links