Displaying publications 41 - 60 of 385 in total

Abstract:
Sort:
  1. Ismail NA, Shameli K, Wong MM, Teow SY, Chew J, Sukri SNAM
    Mater Sci Eng C Mater Biol Appl, 2019 Nov;104:109899.
    PMID: 31499959 DOI: 10.1016/j.msec.2019.109899
    In this study, a comparative study of effect using honey on copper nanoparticles (Cu-NPs) via simple, environmentally friendly process and inexpensive route was reported. Honey and ascorbic acid act as stabilizing and reducing agents with the assistance of sonochemical method. The products were characterized using UV-visible (UV-vis) spectroscopy, X-Ray Diffraction (XRD), High-Resolution Transmission Electron Microscopy (HRTEM), Field-Emission Scanning Electron Microscopy (FESEM) and Fourier Transform Infrared (FTIR) spectroscopy. The reddish brown colour demonstrated the formation of Cu-NPs and UV-visible proved the plasmon resonance of Cu-NPs. XRD also confirmed a highly pure Cu-NPs obtained with absence of copper oxide in which the structure is crystalline. The spherical size of the Cu-NPs was acquire in the presence of honey which is 3.68 ± 0.78 nm with narrow particle distribution. The antibacterial activity was seen against gram-positive and gram-negative bacteria which are Enterococcus faecalis (E. faecalis) and Escherichia coli (E. coli). At higher concentration of Cu-NPs, they were more effective in killing both bacteria. The Cu-NPs without and with honey exhibited toxicities toward normal and cancerous cells. However, Cu-NPs without honey showed more potent killing activity against normal and cancer cells.
    Matched MeSH terms: Copper/pharmacology*
  2. Ninan N, Muthiah M, Bt Yahaya NA, Park IK, Elain A, Wong TW, et al.
    Colloids Surf B Biointerfaces, 2014 Mar 1;115:244-52.
    PMID: 24362063 DOI: 10.1016/j.colsurfb.2013.11.048
    In this article, gelatin/copper activated faujasites (CAF) composite scaffolds were fabricated by lyophilisation technique for promoting partial thickness wound healing. The optimised scaffold with 0.5% (w/w) of CAF, G (0.5%), demonstrated pore size in the range of 10-350 μm. Agar disc diffusion tests verified the antibacterial role of G (0.5%) and further supported that bacterial lysis was due to copper released from the core of CAF embedded in the gelatin matrix. The change in morphology of bacteria as a function of CAF content in gelatin scaffold was studied using SEM analysis. The confocal images revealed the increase in mortality rate of bacteria with increase in concentration of incorporated CAF in gelatin matrix. Proficient oxygen supply to needy cells is a continuing hurdle faced by tissue engineering scaffolds. The dissolved oxygen measurements revealed that CAF embedded in the scaffold were capable of increasing oxygen supply and thereby promote cell proliferation. Also, G (0.5%) exhibited highest cell viability on NIH 3T3 fibroblast cells which was mainly attributed to the highly porous architecture and its ability to enhance oxygen supply to cells. In vivo studies conducted on Sprague Dawley rats revealed the ability of G (0.5%) to promote skin regeneration in 20 days. Thus, the obtained data suggest that G (0.5%) is an ideal candidate for wound healing applications.
    Matched MeSH terms: Copper/pharmacology
  3. Lee SW, Wendy W
    Vet World, 2017 Jul;10(7):803-807.
    PMID: 28831226 DOI: 10.14202/vetworld.2017.803-807
    AIM: The aim of this study is to identify antibiogram and heavy metal resistance pattern of Aeromonas hydrophila and Edwardsiella tarda isolated from red hybrid tilapia (Oreochromis spp.) coinfected with motile aeromonas septicemia and edwardsiellosis in four commercial fish farms.

    MATERIALS AND METHODS: A. hydrophila and E. tarda were isolated using glutamate starch phenol red and xylose lysine deoxycholate (Merck, Germany) as a selective medium, respectively. All the suspected bacterial colonies were identified using conventional biochemical tests and commercial identification kit (BBL Crystal, USA). Susceptibility testing of present bacterial isolates to 16 types of antibiotics (nalidixic acid, oxolinic acid, compound sulfonamides, doxycycline, tetracycline, novobiocin, chloramphenicol, kanamycin, sulfamethoxazole, flumequine, erythromycin, ampicillin, spiramycin, oxytetracycline, amoxicillin, and fosfomycin) and four types of heavy metals (mercury, chromium, copper, and zinc) were carried out using disk diffusion and two-fold agar dilution method, respectively.

    RESULTS: Three hundred isolates of A. hydrophila and E. tarda were successfully identified by biochemical tests. Antibiotic susceptibility testing results showed that 42.2% of the bacterial isolates were sensitive to compound sulfonamides, sulfamethoxazole, flumequine, oxytetracycline, doxycycline, and oxolinic acid. On the other hand, 41.6% of these isolates were resistant to novobiocin, ampicillin, spiramycin, and chloramphenicol, which resulted for multiple antibiotic resistance index values 0.416. Among tested heavy metals, bacterial isolates exhibited resistant pattern of Zn(2+) > Cr(6+) > Cu(2+) > Hg(2+).

    CONCLUSION: Results from this study indicated that A. hydrophila and E. tarda isolated from coinfected farmed red hybrid tilapia were multi-resistant to antibiotics and heavy metals. These resistant profiles could be useful information to fish farmers to avoid unnecessary use of antimicrobial products in the health management of farmed red hybrid tilapia.

    Matched MeSH terms: Copper
  4. Kadhum AA, Mohamad AB, Al-Amiery AA, Takriff MS
    Molecules, 2011 Aug 15;16(8):6969-84.
    PMID: 21844844 DOI: 10.3390/molecules16086969
    3-Aminocoumarin (L) has been synthesized and used as a ligand for the formation of Cr(III), Ni(II), and Cu(II) complexes. The chemical structures were characterized using different spectroscopic methods. The elemental analyses revealed that the complexes where M=Ni(II) and Cu(II) have the general formulae [ML(2)Cl(2)], while the Cr(III) complex has the formula [CrL(2)Cl(2)]Cl. The molar conductance data reveal that all the metal chelates, except the Cr(III) one, are non-electrolytes. From the magnetic and UV-Visible spectra, it is found that these complexes have octahedral structures. The stability for the prepared complexes was studied theoretically using Density Function Theory. The total energy for the complexes was calculated and it was shown that the copper complex is the most stable one. Complexes were tested against selected types of microbial organisms and showed significant activities. The free radical scavenging activity of metal complexes have been determined by measuring their interaction with the stable free radical DPPH and all the compounds have shown encouraging antioxidant activities.
    Matched MeSH terms: Copper/metabolism
  5. Kuppusamy UR, Dharmani M, Kanthimathi MS, Indran M
    Biol Trace Elem Res, 2005 Jul;106(1):29-40.
    PMID: 16037608
    The trace elements copper, zinc, and selenium are important immune modulators and essential cofactors of the antioxidant enzymes. In the present study, the proliferative effect of human peripheral mononuclear cells (PBMCs) that have been exposed to copper, zinc, and selenium and the corresponding activities of antioxidant enzymes, namely superoxide dismutase (SOD), glutathione peroxidase (GPx), and catalase, were determined. Zinc and copper stimulated the PBMC proliferation in a dose-dependent manner within the dose range 25-200 micromol/L. SOD and GPx activities in PBMCs exposed to zinc were inhibited, whereas catalase activity was unaffected. All the three antioxidant enzymes in the cells exposed to copper were inhibited. Selenium exerted more potent inhibition of the cell proliferation while causing stimulation of the antioxidant enzymes at the lowest dose (25 micromol/L) than at the highest dose (200 micromol/L) tested. A significant negative correlation was observed between proliferation and antioxidant enzyme (SOD and GPx) activities in trace-element-exposed PBMC. The present findings substantiate the importance of trace elements as immune modulators and the involvement of enzymatic antioxidant system in the immune cell regulation.
    Matched MeSH terms: Copper/metabolism
  6. Hari P, Kacharaju KR, Anumala N, Pathakota KR, Avula J
    J Indian Soc Periodontol, 2018 5 18;22(2):133-139.
    PMID: 29769768 DOI: 10.4103/jisp.jisp_320_17
    Context: Biofilms are known for their antimicrobial resistance, and so is the subgingival plaque biofilm, the primary etiologic factor for periodontal infections.

    Aims: The objective of this study is to investigate if the subgingival plaque biofilm resistance can be reduced using doxycycline in the presence of low-intensity electric field (bioelectric effect).

    Settings and Design: The study was an in vitro microbiological study.

    Materials and Methods: Subgingival plaque samples from chronic periodontitis patients were collected to grow subgingival plaque biofilms on hydroxyapatite disks. Hydroxyapatite disks with the plaque biofilms from each patient were divided into four groups: (i) No intervention - control, (ii) current alone - CU; (iii) doxycycline - AB, and (iv) combined treatment - CU + AB. After respective treatments, the disks were anaerobically incubated for 48 h, the biofilm was dispersed and subcultured and colony-forming unit/mL was estimated in all the four groups.

    Statistical Analysis: Statistical analysis was done using Mann-Whitney and Kruskal-Wallis tests for intergroup comparisons. T-test was done to assess the difference in current flow between the groups CU and CU + AB.

    Results: All the three treatment modalities showed antibacterial effect. Application of current alone resulted in reduced bacterial growth than control group. Doxycycline alone resulted in reduction in bacterial counts better than control and current alone groups. The combination treatment showed greatest inhibition of bacterial colonies.

    Conclusion: The ability of doxycycline antibiotic in inhibiting plaque biofilm was significantly enhanced by application of a weak electric field (5 volts for 2 min).

    Matched MeSH terms: Copper
  7. Alkarkhi AF, Ramli SB, Easa AM
    Int J Food Sci Nutr, 2009;60 Suppl 4:116-25.
    PMID: 19115121 DOI: 10.1080/09637480802609368
    Major (sodium, potassium, calcium, magnesium) and minor elements (iron, copper, zinc, manganese) and one heavy metal (lead) of Cavendish banana flour and Dream banana flour were determined, and data were analyzed using multivariate statistical techniques of factor analysis and discriminant analysis. Factor analysis yielded four factors explaining more than 81% of the total variance: the first factor explained 28.73%, comprising magnesium, sodium, and iron; the second factor explained 21.47%, comprising only manganese and copper; the third factor explained 15.66%, comprising zinc and lead; while the fourth factor explained 15.50%, comprising potassium. Discriminant analysis showed that magnesium and sodium exhibited a strong contribution in discriminating the two types of banana flour, affording 100% correct assignation. This study presents the usefulness of multivariate statistical techniques for analysis and interpretation of complex mineral content data from banana flour of different varieties.
    Matched MeSH terms: Copper/analysis
  8. Yap CK, Pang BH
    Environ Monit Assess, 2011 Dec;183(1-4):23-39.
    PMID: 21340548 DOI: 10.1007/s10661-011-1903-3
    Surface sediments were collected from the north western aquatic area (13 intertidal sites and 5 river drainages) of Peninsular Malaysia, which were suspected to have received different anthropogenic sources. These sites included town areas, ports, fishing village, industrial areas, highway sides, jetties and some relatively unpolluted sites. The present study revealed that 4.79-32.91 μg/g dry weight for Cu, 15.85-61.56 μg/g dry weight for Pb, and 33.6-317.4 μg/g dry weight for Zn based on 13 intertidal surface sediments while those based on 5 river drainage surface sediments were 10.24-119.6 μg/g dry weight for Cu, 26.7-125.7 μg/g dry weight for Pb and 88.7-484.1 μg/g dry weight for Zn. In general, the metal levels in the drainage sediments are higher than in the intertidal sediments, suggesting dilution factor in the intertidal sediment and direct effluent from point sources in the drainage sediment. In particular, the total concentrations of Cu, Pb, and Zn for the sampling site at Kuala Kurau Town exceeded the Effect Range Median values for Cu, Pb, and Zn for assessments of sediment quality values for freshwater sediment as proposed by MacDonald et al. (Arch Environ Contam Toxicol 39:20-31, 2000), thus adverse biological effects would be observed above this level. Assessment using enrichment factor (using Fe as a normalizer) and geoaccumulation index showed that the three metals at Kuala Kurau Town and Juru Industry drainage were evidenced as having more enrichment and mostly due to non-natural sources. However, caution should be exercised that the interpretation can only become valid when the ratios, indices, and sediment quality values are combined. This is due to the fact that not all the established indices are applicable and, to a certain extent, some of them should be further revised and improved to suit a different metal for Malaysian sediment. Undoubtedly, sites near drainages at Kuala Kurau Town and Juru River Basin need greater attention to mitigate the heavy metal pollution in the future.
    Matched MeSH terms: Copper/analysis*
  9. Karimi G, Shahar S, Homayouni N, Rajikan R, Abu Bakar NF, Othman MS
    Asian Pac J Cancer Prev, 2012;13(9):4249-53.
    PMID: 23167323
    While associations between trace elements and heavy metals with prostate cancer are still debatable, they have been considered as risk factors for prostate cancer. Thus, this study aimed to detect any links between selected minerals and heavy metals including Se, Zn, Cu, Mn and Fe with prostate cancer. A case control study was carried out among 100 subjects (case n=50, control n=50), matched for age and ethnicity. Trace elements and heavy metals level in hair and nail samples were determined by ICP-MS. Mean selenium levels in hair and nail of the cases were significantly lower as compared to controls. A similar trend was noted for zinc in both hair and nail samples, whereas the mean level of copper was significantly higher in cases than controls. Similar elevation was noted for iron and manganese (p<0.05 for all parameters). Low levels of selenium and zinc and high levels of copper, iron and manganese appear to be associated with the risk of prostate cancer. Further studies to elucidate the causal mechanisms and appropriate chemopreventive measures are needed.
    Matched MeSH terms: Copper/analysis
  10. Sahari NS, Shahir S, Ibrahim Z, Hasmoni SH, Altowayti WAH
    Environ Sci Pollut Res Int, 2023 Nov;30(51):110069-110078.
    PMID: 37814051 DOI: 10.1007/s11356-023-30067-w
    This review discusses the application of bacterial nanocellulose (BNC) and modified BNC in treating wastewater containing heavy metals and dye contaminants. It also highlights the challenges and future perspectives of BNC and its composites. Untreated industrial effluents containing toxic heavy metals are systematically discharged into public waters. In particular, lead (Pb), copper (Cu), cadmium (Cd), nickel (Ni), zinc (Zn), and arsenic (As) are very harmful to human health and, in some cases, may lead to death. Several methods such as chemical precipitation, ion exchange, membrane filtration, coagulation, and Fenton oxidation are used to remove these heavy metals from the environment. However, these methods involve the use of numerous chemicals whilst producing high amount of toxic sludge. Meanwhile, the development of the adsorption-based technique has provided an alternative way of treating wastewater using BNC. Bacterial nanocellulose requires less energy for purification and has higher purity than plant cellulose. In general, the optimum growth parameters are crucial in BNC production. Even though native BNC can be used for the removal of heavy metals and dyes, the incorporation of other materials, such as polyethyleneimine, graphene oxide, calcium carbonate and polydopamine can improve sorption efficiencies.
    Matched MeSH terms: Copper
  11. Harun R, Nayar S, Thum Yin Lai
    Malays J Reprod Health, 1989 Dec;7(2):131-7.
    PMID: 12283073
    PIP: Previous studies have shown the users of intrauterine devices have a 4.4 times greater risk of pelvic inflammatory disease. This present study intends to categorize the distribution of microbes in cultures from different types of extracted copper intrauterine devices (IUCDs). Bacteriological studies of aerobic and anaerobic organisms were performed on the extracted IUCDs of 522 IUCD users; 480 wearing a Multiload Cu 250, 15 wearing a Copper T, 22 Lippes Loop and 5 a Copper 7. Cultures were negative in 46 (8.8%) IUCD cultures where 43 were Multiloads, Copper T (1) and Lippes Loop (2). 91.2% yielded bacterial growth and the commonest organisms isolated were Staphylococcus species, (23%), E.coli (9.6%) and Staphylococcus aureus (4.0%. Candida albicans, E.coli and Staphylococcus sp. were commonly isolated from Multiload, Copper T, Lippes Loop and Copper 7. Beta-hemolytic streptococci, Staphylococcus aureus and Candida sp. were frequently recovered from Multiload, Copper T and Lippes Loop. Only Multiload cultures yielded Bacillus, Streptococcus viridans, Klebsiella, Proteus, Enterobacter, Citrobacter diversus, Citrobacter freundii, Moraxella, Pseudomonas and Acinetobacter. One woman with complaint of PID yielded E.coli in her IUCD culture.
    Matched MeSH terms: Intrauterine Devices, Copper*
  12. Hamid SBA, Chowdhury ZZ, Zain SM
    Materials (Basel), 2014 Apr 09;7(4):2815-2832.
    PMID: 28788595 DOI: 10.3390/ma7042815
    This study examines the feasibility of catalytically pretreated biochar derived from the dried exocarp or fruit peel of mangostene with Group I alkali metal hydroxide (KOH). The pretreated char was activated in the presence of carbon dioxide gas flow at high temperature to upgrade its physiochemical properties for the removal of copper, Cu(II) cations in single solute system. The effect of three independent variables, including temperature, agitation time and concentration, on sorption performance were carried out. Reaction kinetics parameters were determined by using linear regression analysis of the pseudo first, pseudo second, Elovich and intra-particle diffusion models. The regression co-efficient, R² values were best for the pseudo second order kinetic model for all the concentration ranges under investigation. This implied that Cu(II) cations were adsorbed mainly by chemical interactions with the surface active sites of the activated biochar. Langmuir, Freundlich and Temkin isotherm models were used to interpret the equilibrium data at different temperature. Thermodynamic studies revealed that the sorption process was spontaneous and endothermic. The surface area of the activated sample was 367.10 m²/g, whereas before base activation, it was only 1.22 m²/g. The results elucidated that the base pretreatment was efficient enough to yield porous carbon with an enlarged surface area, which can successfully eliminate Cu(II) cations from waste water.
    Matched MeSH terms: Copper
  13. Aslina A. Bakar, Amirul A. Mustafa, Ahmad R. Razali, Norhayati Mutalib, Amirudin Ibrahim
    ESTEEM Academic Journal, 2020;16(2):75-87.
    MyJurnal
    This study aims to investigate the bending effects on the flexible wearable antenna by using copper nanowires and polydimethylsiloxane (PDMS). This project focuses on the bending effect on the proposed wearable antenna in the presence of skin tissue and at free space. The radiation characteristics were simulated and analyzed when the antenna was under flat and bent conditions. The performance result of return loss and radiation pattern (Efield and H-field) of proposed wearable antenna was analyzed. The material for the proposed antenna is designed to be flexible and wearable for the application of body-centric wireless communication (BCWCs) at the frequency of 2.45 GHz with the approval specifications of industrial, scientific and medical (ISM) band. Radiator for the proposed wearable antenna is fabricated using copper nanowire, and the antenna substrate is by using polydimethylsiloxane (PDMS). The performance result of the proposed wearable antenna was simulated by using CST microwave studio. From the simulated result for different bending angles, a conclusion was drawn that bending of structure can improve the impedance matching and return loss during the bent condition. However, the resonant frequency tends to shift as the antenna is bent up to 50°. At the critical angle of 70°, the frequency is shifted to a lower frequency.
    Matched MeSH terms: Copper
  14. Mashitah, Zulfadhly Z, Bhatia S
    PMID: 10595446
    Non-living biomass of Pycnoporus sanguineus has an ability to take up lead,copper and cadmium ions from an aqueous solution. The role played by various functional groups in the cell wall and the mechanism uptake of lead, copper and cadmium by Pycnoporus sanguineus were investigated. Modification of the functional groups such as lipids, carboxylic and amino was done through chemical pretreatment in order to study their role in biosorption of metal ions. Results showed that the chemical modification of these functional groups has modified the ability of biomass to remove lead, copper and cadmium ions from the solution. Scanning electron microscopy was also used to study the morphological structure of the biomass before and after adsorption. The electron micrograph indicated that the structure of biomass changed due to the adsorption of the metals onto the cell walls. Furthermore, the X-ray energy dispersion analysis (EDAX) showed that the calcium ion present in the cell wall of biomass was released and replaced by lead ions. This implied that an ion exchange is one of the principal mechanisms for metal biosorption.
    Matched MeSH terms: Copper
  15. Mandal BH, Rahman ML, Yusoff MM, Chong KF, Sarkar SM
    Carbohydr Polym, 2017 Jan 20;156:175-181.
    PMID: 27842811 DOI: 10.1016/j.carbpol.2016.09.021
    Corn-cob cellulose supported poly(hydroxamic acid) Cu(II) complex was prepared by the surface modification of waste corn-cob cellulose through graft copolymerization and subsequent hydroximation. The complex was characterized by IR, UV, FESEM, TEM, XPS, EDX and ICP-AES analyses. The complex has been found to be an efficient catalyst for 1,3-dipolar Huisgen cycloaddition (CuAAC) of aryl/alkyl azides with a variety of alkynes as well as one-pot three-components reaction in the presence of sodium ascorbate to give the corresponding cycloaddition products in up to 96% yield and high turn over number (TON 18,600) and turn over frequency (TOF 930h-1) were achieved. The complex was easy to recover from the reaction mixture and reused six times without significant loss of its catalytic activity.
    Matched MeSH terms: Copper/chemistry*
  16. Nicodemus Ujih, M.B., Mohammad Isa Mohamadin, Millaa Armila Asli, Bebe Norlita Mohamed
    Scientific Research Journal, 2017;14(1):15-27.
    MyJurnal
    Heavy metal ions contamination has become more serious which is caused
    by the releasing of toxic waterfrom industrial area and landfill that are very
    harmful to all living organism especially human and can even cause death
    if contaminated in small amount of heavy metal concentration. Currently,
    peoples are using classic method namely electrochemical treatment,
    chemical oxidation/reduction, chemical precipitation and reverse osmosis
    to eliminate the metal ions from toxic water. Unfortunately, these methods
    are costly and not environmentally friendly as compared to bioadsorption
    method, where agricultural waste is used as biosorbent to remove heavy
    metals. Two types of agricultural waste used in this research namely oil
    palm mesocarp fiber (Elaesis guineensis sp.) (OPMF) and mangrove bark
    (Rhizophora apiculate sp.) (MB) biomass. Through chemical treatment,
    the removal efficiency was found to improve. The removal efficiency is
    examined based on four specification namely dosage, of biosorbent to
    adsorb fourtypes of metalsion explicitly nickel, lead, copper, and chromium.
    The research has found that the removal efficiency of MB was lower than
    OPMF; whereas, the multiple metals ions removal efficiency decreased in
    the order of Pb2+ > Cu2+ > Ni2+ > Cr2+.
    Matched MeSH terms: Copper
  17. Shuhaimi-Othman M, Pascoe D
    Ecotoxicol Environ Saf, 2007 Jan;66(1):29-35.
    PMID: 16647753
    The uptake and elimination of copper (Cu), cadmium (Cd), and zinc (Zn) by the amphipod Hyalella azteca during exposure to the metals singly and in various combinations was examined in controlled laboratory experiments. In single metal exposures the accumulation of all metals was rapid and increased with exposure time. Copper elimination was slower compared to that for zinc and for cadmium no elimination was detected after 5 days in clean water. In the two-metal mixtures it appears that the presence of one metal influenced the bioconcentration of the other, since the bioconcentration factor (BCF) for copper was higher in the presence of cadmium than in the presence of zinc and in the case of cadmium, the decrease of K(1) values from cadmium single exposure to the binary and tertiary mixtures suggests possible inhibition of cadmium uptake by the other metals. In the case of the three-metal mixture the situation is less clear, with both increased and decreased BCFs recorded, in comparison to single-metal and two-metal mixtures, suggesting both stimulation and inhibition of metal accumulation.
    Matched MeSH terms: Copper/metabolism*; Copper/toxicity
  18. Gurdeep Singh HK, Yusup S, Quitain AT, Abdullah B, Ameen M, Sasaki M, et al.
    Environ Res, 2020 07;186:109616.
    PMID: 32668556 DOI: 10.1016/j.envres.2020.109616
    Catalytic cracking of vegetable oil mainly processed over zeolites, and among all the zeolites particularly HZMS-5 has been investigated on wide range for renewable and clean gasoline production from various plant oils. Despite the fact that HZSM-5 offers a higher conversion degree and boost aromatics yield, the isomerate yield reduces due to high cracking activity and shape selectivity of HZSM-5. Hence, to overcome these problems, in this study the transition metals, such as nickel and copper doped over HZSM-5 were tested for its efficiencies to improve the isoparaffin compounds. The catalysts were screened with linoleic acid in a catalytic cracking reaction conducted at 450 ᵒC for 90 min in an atmospheric condition in batch reactor. Then, the gasoline composition of the organic liquid product (OLP) was analysed in terms of paraffin, isoparaffin, olefin, naphthenes and aromatics (PIONA). The results showed that Cu/ZSM-5 produced the highest liquid yield of 79.1%, at the same time reduced the production of gas and coke to 18.8% and 0.7%. Furthermore, the desired isoparaffin composition in biogasoline increased from 1.6% to 6.8% and at the same time reduced the oxygenated and aromatic compounds to 15.4% and 59.7%, respectively. The linoleic acid as model compound of rubber seed oil, in the catalytic cracking reaction provides a clearer understanding of the process. Besides, the water gas shift (WGS) reaction in catalytic cracking reaction provides insitu hydrogen production to saturate the branched olefin into the desired isoparaffin and the aromatics into naphthenes.
    Matched MeSH terms: Copper
  19. Seng HL, Wang WS, Kong SM, Alan Ong HK, Win YF, Raja Abd Rahman RN, et al.
    Biometals, 2012 Oct;25(5):1061-81.
    PMID: 22836829 DOI: 10.1007/s10534-012-9572-4
    A series of ternary copper(II)-1,10-phenanthroline complexes with glycine and methylated glycine derivatives, [Cu(phen)(aa)(H(2)O)]NO(3)·xH(2)O 1-4 (amino acid (aa): glycine (gly), 1; DL: -alanine (DL: -ala), 2; 2,2-dimethylglycine (C-dmg), 3; sarcosine (sar), 4), were synthesized and characterized by FTIR, elemental analysis, electrospray ionization-mass spectra (ESI-MS), UV-visible spectroscopy and molar conductivity measurement. The determined X-ray crystallographic structures of 2 and 3 show each to consist of distorted square pyramidal [Cu(phen)(aa)(H(2)O)](+) cation, a nitrate counter anion, and with or without lattice water, similar to previously reported structure of [Cu(phen)(gly)(H(2)O)]NO(3)·1½H(2)O. It is found that 1-4 exist as 1:1 electrolytes in aqueous solution, and the cationic copper(II) complexes are at least stable up to 24 h. Positive-ion ESI-MS spectra show existence of only undissociated [Cu(phen)(aa)](+) species. Electron paramagnetic resonance, gel electrophoresis, fluorescence quenching, and restriction enzyme inhibition assay were used to study the binding interaction, binding affinity and selectivity of these complexes for various types of B-form DNA duplexes and G-quadruplex. All complexes can bind selectively to DNA by intercalation and electrostatic forces, and inhibit topoisomerase I. The effect of the methyl substituents of the coordinated amino acid in the above complexes on these biological properties are presented and discussed. The IC(50) values (24 h) of 1-4 for nasopharyngeal cancer cell line HK1 are in the range 2.2-5.2 μM while the corresponding values for normal cell line NP69 are greater than 13.0 μM. All complexes, at 5 μM, induced 41-60 % apoptotic cell death in HK1 cells but no significant cell death in NP69 cells.
    Matched MeSH terms: Copper/pharmacology*; Copper/chemistry
  20. Mashitah Mat Don, Yus Azila Yahaya, Bhatia, Subhash
    MyJurnal
    The removal of heavy metals like lead, copper and cadmium from wastewater streams is an important environmental issue. The capability of immobilized Pycnoporus sanguineus (P. sanguineus), a white-rot macrofungi to remove heavy metals from aqueous solution in a packed bed column was investigated. Lead (Pb (II)) biosorption by immobilized cells of P. sanguineus was investigated in a packed bed column. The experiments were carried out by considering the effect of bed height (5-13 cm), flow rate (4-12 ml min-1) and initial lead (II) concentration (50-300 mg L-1). The breakthrough profiles showed that the saturation of metal ions was achieved faster for 5 cm bed height and 12 ml min-1 influent flow rate. However, the breakthrough time decreased as the initial metal concentration increased from 50 to 300 mg L-1. The column was regenerated using 0.1M HCl solution and biosorptiondesorption studies were carried out for 2 cycles. The results showed that the breakthrough time decreased as the number of cycle was proceeded.
    Matched MeSH terms: Copper
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links