Displaying publications 41 - 60 of 115 in total

Abstract:
Sort:
  1. Fulltext Household solid waste management practices and perceptions among residents in the East Coast of Malaysia
    Fadhullah W, Imran NIN, Ismail SNS, Jaafar MH, Abdullah H
    BMC Public Health, 2022 Jan 05;22(1):1.
    PMID: 34983455 DOI: 10.1186/s12889-021-12274-7
    BACKGROUND: Poor waste disposal practices hamper the progress towards an integrated solid waste management in households. Knowledge of current practices and perception of household solid waste management is necessary for accurate decision making in the move towards a more sustainable approach. This study investigates the household waste practices and perceptions about waste management in Panji, one of the sub-districts in Kota Bharu, Kelantan, Malaysia.

    METHODS: A stratified random sampling technique using a cross-sectional survey questionnaire was used to collect data. A total of 338 households were interviewed in the survey and data were analyzed using SPSS. Chi-square goodness of fit test was used to determine the relationships between categorical variables, whereas Chi-square bivariate correlation test was performed to observe the correlation between the perceptions of waste segregation with socio-demographic background of the respondents. The correlation between perception of respondents with the locality, house type and waste type were also conducted. Principal component analysis was used to identify grouping of variables and to establish which factors were interrelated in any given construct.

    RESULTS: The results of the study revealed that 74.3 % of households disposed of food debris as waste and 18.3% disposed of plastic materials as waste. The study also showed that 50.3% of the households segregate their waste while 49.7% did not. About 95.9% of the respondents were aware that improper waste management leads to disease; such as diarrhea and malaria. There were associations between locality, age and house type with waste segregation practices among respondents (Chi-square test, p<0.05). Associations were also found between locality with the perception of improper waste management which lead to disease (Chi-square test, p<0.05). Principal Component Analysis showed that 17.94% of the variance has high positive loading (positive relationship) with age, marital status and, type of house.

    CONCLUSION: This study highlights the importance to design waste separation programs that suit the needs of targeted population as a boost towards sustainable solid waste management practices.

    Matched MeSH terms: Solid Waste
  2. Unraveling the driving factors of the plastic waste trade network formation and dynamics
    Liu F, Fan C, Li J, Tan Q
    J Environ Manage, 2023 Dec 15;348:119422.
    PMID: 37879176 DOI: 10.1016/j.jenvman.2023.119422
    International trade of plastic waste promotes the global plastic circular economy and improves resource efficiency, but exacerbates the ubiquitous plastic pollution. Understanding the drivers behind the evolution of the global plastic waste trade network (GPWTN) is pivotal for developing new international instruments to end plastic pollution and fostering clean solid-waste trade. Employing social network analysis (SNA) and quadratic assignment procedure (QAP) model, this study structures the GPWTN using bilateral trade data, revealing shifts from highly centralized to cross-layered networks and relevant drivers. It is suggested that Malaysia and Turkey has become the new key recipients of the GPWTN, replacing China, accompanied by the launch of new environmental regulations in some countries. Transportation cost is the most critical factor for the formation of the GPWTN, followed by gaps in resource demand, bio-based resource availability, and transportation accessibility. Trading partners in closer proximity, especially those with contiguous borders, are more likely to trade in waste plastics, while coastal countries play an important role in these partnerships. Economies with more abundant biomaterials, higher incomes, and greater environmental burdens are more likely to be exporters, while economies with scarcer resources and more compelling demands are more likely to import plastic waste. Countries involved in the trade in plastic waste, as either importers or exporters, receive varying degrees of economic benefits but bear potential environmental impacts. Therefore, global plastic pollution control and trade prosperity necessitates necessitate coordinated endeavors from nations and intergovernmental bodies for a mutually advantageous denouement.
    Matched MeSH terms: Solid Waste
  3. Thermo-kinetic behaviour of green synthesized nanomaterial enhanced organic phase change material: Model fitting approach
    Kalidasan B, Pandey AK, Aljafari B, Chinnasamy S, Kareri T, Rahman S
    J Environ Manage, 2023 Dec 15;348:119439.
    PMID: 37890400 DOI: 10.1016/j.jenvman.2023.119439
    Metal, carbon and conducting polymer nanoparticles are blended with organic phase change materials (PCMs) to enhance the thermal conductivity, heat storage ability, thermal stability and optical property. However, the existing nanoparticle are expensive and need to be handle with high caution during operation as well during disposal owing to its toxicity. Subsequently handling of solid waste and the disposal of organic PCM after longevity usage are of utmost concern and are less exposed. Henceforth, the current research presents a new dimension of exploration by green synthesized nanoparticles from a thorny shrub of an invasive weed named Prosopis Juliflora (PJ) which is a agro based solid waste. Subsequently, the research is indented to decide the concentration of green synthesized nanoparticle for effective heat transfer rate of organic PCM (Tm = 35-40 °C & Hm = 145 J/g). Furthermore, an in-depth understanding on the kinetic and thermodynamic profile of degradation mechanism involved in disposal of PCM after usage via Coats and Redfern technique is exhibited. Engaging a two-step method, we fuse the green synthesized nanomaterial with PCM to obtain nanocomposite PCM. On experimental evaluation, thermal conductivity of the developed nanocomposite (PCM + PJ) increases by 63.8% (0.282 W/m⋅K to 0.462 W/m⋅K) with 0.8 wt% green synthesized nanomaterial owing to the uniform distribution of nanoparticle within PCM matrix thereby contributing to bridging thermal networks. Subsequently, PCM and PCM + PJ nanocomposites are tested using thermogravimetric analyzer at different heating rates (05 °C/min; 10 °C/min; 15 °C/min & 20 °C/min) to analyze the decomposition kinetic reaction. The kinetic and thermodynamic profile of degradation mechanism involved in disposal of PCM and its nanocomposite of PCM + PJ provides insight on thermal parameters to be considered on large scale operation and to understand the complex nature of the chemical reactions. Adopting thirteen different chemical mechanism model under Coats and Redfern method we determine the reaction mechanism; kinetic parameter like activation energy (Ea) & pre-exponential factor (A) and thermodynamic parameter like change in enthalpy (ΔH), change in Gibbs free energy (ΔG) and change in entropy (ΔS). Dispersion of PJ nanomaterial with PCM reduces Ea from 370.82 kJ/mol-1 to 342.54 kJ/mol-1 (7.7% reduction), as the developed nanomaterial is enriched in carbon element and exhibits a catalytic effect for breakdown reaction. Corresponding, value of ΔG for PCM and PCM + PJ sample within heating rates of 05-20 °C/min varies between 168.95 and 41.611 kJ/mol-1. The current research will unbolt new works with focus on exploring the pyrolysis behaviour of phase change materials and its nanocomposite used for energy storage applications. This work also provides insights on the disposal of PCM which is an organic solid waste. The thermo-kinetic profile will help to investigate and predict the optimum heating rate and temperature range for conversion of micro-scale pyrolysis to commercial scale process.
    Matched MeSH terms: Solid Waste
  4. Fulltext Deep learning-based models for environmental management: Recognizing construction, renovation, and demolition waste in-the-wild
    Sirimewan D, Bazli M, Raman S, Mohandes SR, Kineber AF, Arashpour M
    J Environ Manage, 2024 Feb;351:119908.
    PMID: 38169254 DOI: 10.1016/j.jenvman.2023.119908
    The construction industry generates a substantial volume of solid waste, often destinated for landfills, causing significant environmental pollution. Waste recycling is decisive in managing waste yet challenging due to labor-intensive sorting processes and the diverse forms of waste. Deep learning (DL) models have made remarkable strides in automating domestic waste recognition and sorting. However, the application of DL models to recognize the waste derived from construction, renovation, and demolition (CRD) activities remains limited due to the context-specific studies conducted in previous research. This paper aims to realistically capture the complexity of waste streams in the CRD context. The study encompasses collecting and annotating CRD waste images in real-world, uncontrolled environments. It then evaluates the performance of state-of-the-art DL models for automatically recognizing CRD waste in-the-wild. Several pre-trained networks are utilized to perform effectual feature extraction and transfer learning during DL model training. The results demonstrated that DL models, whether integrated with larger or lightweight backbone networks can recognize the composition of CRD waste streams in-the-wild which is useful for automated waste sorting. The outcome of the study emphasized the applicability of DL models in recognizing and sorting solid waste across various industrial domains, thereby contributing to resource recovery and encouraging environmental management efforts.
    Matched MeSH terms: Solid Waste
  5. An overview of municipal solid waste management and landfill leachate treatment: Malaysia and Asian perspectives
    Kamaruddin MA, Yusoff MS, Rui LM, Isa AM, Zawawi MH, Alrozi R
    Environ Sci Pollut Res Int, 2017 Dec;24(35):26988-27020.
    PMID: 29067615 DOI: 10.1007/s11356-017-0303-9
    Currently, generation of solid waste per capita in Malaysia is about 1.1 kg/day. Over 26,500 t of solid waste is disposed almost solely through 166 operating landfills in the country every day. Despite the availability of other disposal methods, landfill is the most widely accepted and prevalent method for municipal solid waste (MSW) disposal in developing countries, including Malaysia. This is mainly ascribed to its inherent forte in terms cost saving and simpler operational mechanism. However, there is a downside. Environmental pollution caused by the landfill leachate has been one of the typical dilemmas of landfilling method. Leachate is the liquid produced when water percolates through solid waste and contains dissolved or suspended materials from various disposed materials and biodecomposition processes. It is often a high-strength wastewater with extreme pH, chemical oxygen demand (COD), biochemical oxygen demand (BOD), inorganic salts and toxicity. Its composition differs over the time and space within a particular landfill, influenced by a broad spectrum of factors, namely waste composition, landfilling practice (solid waste contouring and compacting), local climatic conditions, landfill's physico-chemical conditions, biogeochemistry and landfill age. This paper summarises an overview of landfill operation and leachate treatment availability reported in literature: a broad spectrum of landfill management opportunity, leachate parameter discussions and the way forward of landfill leachate treatment applicability.
    Matched MeSH terms: Solid Waste/analysis*
  6. Utilization of chemically treated municipal solid waste (spent coffee bean powder) as reinforcement in cellulose matrix for packaging applications
    Thiagamani SMK, Nagarajan R, Jawaid M, Anumakonda V, Siengchin S
    Waste Manag, 2017 Nov;69:445-454.
    PMID: 28774586 DOI: 10.1016/j.wasman.2017.07.035
    As the annual production of the solid waste generable in the form of spent coffee bean powder (SCBP) is over 6 million tons, its utilization in the generation of green energy, waste water treatment and as a filler in biocomposites is desirable. The objective of this article is to analyze the possibilities to valorize coffee bean powder as a filler in cellulose matrix. Cellulose matrix was dissolved in the relatively safer aqueous solution mixture (8% LiOH and 15% Urea) precooled to -12.5°C. To the cellulose solution (SCBP) was added in 5-25wt% and the composite films were prepared by regeneration method using ethyl alcohol as a coagulant. Some SCBP was treated with aq. 5% NaOH and the composite films were also prepared using alkali treated SCBP as a filler. The films of composites were uniform with brown in color. The cellulose/SCBP films without and with alkali treated SCBP were characterized by FTIR, XRD, optical and polarized optical microscopy, thermogravimetric analysis (TGA) and tensile tests. The maximum tensile strength of the composite films with alkali treated SCBP varied between (106-149MPa) and increased with SCBP content when compared to the composites with untreated SCBP. The thermal stability of the composite was higher at elevated temperatures when alkali treated SCBP was used. Based on the improved tensile properties and photo resistivity, the cellulose/SCBP composite films with alkali treated SCBP may be considered for packaging and wrapping of flowers and vegetables.
    Matched MeSH terms: Solid Waste*
  7. Fulltext Challenges and practices on waste management and disposal during COVID-19 pandemic
    Hantoko D, Li X, Pariatamby A, Yoshikawa K, Horttanainen M, Yan M
    J Environ Manage, 2021 May 15;286:112140.
    PMID: 33652254 DOI: 10.1016/j.jenvman.2021.112140
    The COVID-19 pandemic has imposed a global emergency and also has raised issues with waste management practices. This study emphasized the challenges of increased waste disposal during the COVID-19 crisis and its response practices. Data obtained from the scientific research papers, publications from the governments and multilateral organizations, and media reports were used to quantify the effect of the pandemic towards waste generation. A huge increase in the amount of used personal protective equipments (facemasks, gloves, and other protective stuffs) and wide distribution of infectious wastes from hospitals, health care facilities, and quarantined households was found. The amount of food and plastic waste also increased during the pandemic. These factors caused waste treatment facilities to be overwhelmed, forcing emergency treatment and disposals (e.g., co-disposal in a municipal solid waste incinerator, cement kilns, industrial furnaces, and deep burial) to ramp up processing capacity. This paper discussed the ways the operation of those facilities must be improved to cope with the challenge of handling medical waste, as well as working around the restrictions imposed due to COVID-19. The study also highlights the need for short, mid, and longer-term responses towards waste management during the pandemic. Furthermore, the practices discussed in this paper may provide an option for alternative approaches and development of sustainable strategies for mitigating similar pandemics in the future.
    Matched MeSH terms: Solid Waste/analysis
  8. A societal transition of MSW management in Xiamen (China) toward a circular economy through integrated waste recycling and technological digitization
    Kurniawan TA, Lo W, Singh D, Othman MHD, Avtar R, Hwang GH, et al.
    Environ Pollut, 2021 May 15;277:116741.
    PMID: 33652179 DOI: 10.1016/j.envpol.2021.116741
    Recently Xiamen (China) has encountered various challenges of municipal solid waste management (MSWM) such as lack of a complete garbage sorting and recycling system, the absence of waste segregation between organic and dry waste at source, and a shortage of complete and clear information about the MSW generated. This article critically analyzes the existing bottlenecks in its waste management system and discusses the way forward for the city to enhance its MSWM by drawing lessons from Hong Kong's effectiveness in dealing with the same problems over the past decades. Solutions to the MSWM problem are not only limited to technological options, but also integrate environmental, legal, and institutional perspectives. The solutions include (1) enhancing source separation and improving recycling system; (2) improving the legislation system of the MSWM; (3) improvement of terminal disposal facilities in the city; (4) incorporating digitization into MSWM; and (5) establishing standards and definitions for recycled products and/or recyclable materials. We also evaluate and compare different aspects of MSWM in Xiamen and Hong Kong SAR (special administrative region) under the framework of 'One Country, Two Systems' concerning environmental policies, generation, composition, characteristics, treatment, and disposal of their MSW. The nexus of society, economics of the MSW, and the environment in the sustainability sphere are established by promoting local recycling industries and the standardization of recycled products and/or recyclable materials. The roles of digitization technologies in the 4th Industrial Revolution for waste reduction in the framework of circular economy (CE) are also elaborated. This technological solution may improve the city's MSWM in terms of public participation in MSW separation through reduction, recycle, reuse, recovery, and repair (5Rs) schemes. To meet top-down policy goals such as a 35% recycling rate for the generated waste by 2030, incorporating digitization into the MSWM provides the city with technology-driven waste solutions.
    Matched MeSH terms: Solid Waste/analysis
  9. An integrated life cycle multi-objective optimization model for health-environment-economic nexus in food waste management sector
    Lin Z, Ooi JK, Woon KS
    Sci Total Environ, 2022 Apr 10;816:151541.
    PMID: 34774629 DOI: 10.1016/j.scitotenv.2021.151541
    Food waste is a universal problem in many countries. In line with Sustainable Development Goals 7 and 12, it is crucial to identify a cost-effective food waste valorization management framework with the least human health and environmental impacts. However, studies on the synergistic effect of life cycle assessment and mathematical optimization interconnected with human health, environment, and economic are relatively few and far between; hence they cannot provide holistic recommendations to policymakers in developing environmental and economic feasibility of food waste management frameworks. Taking Malaysia as a case study, this study proposes a simple and deterministic model that integrates life cycle assessment and multi-objective mathematical optimization to unpack the health-environment-economic wellbeing nexus in food waste management sector. The model evaluates the life cycle human health, environmental, and economic impacts of five food waste disposal and valorization technologies: open landfill, sanitary landfill, aerated windrow composting, high-temperature drying sterilization, and anaerobic digestion, and identifies the optimal food waste valorization configuration solution in Malaysia. Based on the results modeled by SimaPro 9.0 and General Algebraic Modeling System with augmented ε-constraint, valorization of food waste into electricity via anaerobic digestion is the most favorable option, with 146% and 161% reduction of human health and ecosystems, respectively, as compared with open landfill. If cost is combined as an objective function with human health and ecosystems, high-temperature drying sterilization is the most attractive scenario due to the high livestock feed revenue. Among the 10 Pareto-optimal solutions, 9% sanitary landfill, 3% aerated windrow composting, 30% high-temperature drying sterilization, 30% anaerobic digestion to electricity, and 28% anaerobic digestion to cooking gas, is recommended as future food waste management configuration. The sensitivity results demonstrate that prices of electricity, cooking gas, and livestock feed affect the optimal configuration food waste management system.
    Matched MeSH terms: Solid Waste/analysis
  10. VFA and ammonia from residential food waste as indicators of odor potential
    Qamaruz-Zaman N, Milke MW
    Waste Manag, 2012 Dec;32(12):2426-30.
    PMID: 22819598 DOI: 10.1016/j.wasman.2012.06.023
    Research was conducted to determine suitable chemical parameters as indicators of odor from decomposing food wastes. Prepared food scraps were stored in 18 l plastic buckets (2 kg wet weight each) at 20 °C and 8 °C to reproduce high and low temperature conditions. After 1, 3, 7, 10 and 14 days of storage, the odor from the buckets were marked to an intensity scale of 0 (no odor) to 5 (intense) and the corresponding leachate analyzed for volatile fatty acids, ammonia and total organic carbon. A linear relationship between odor intensity and the measured parameter indicates a suitable odor indicator. Odor intensified with longer storage period and warmer surroundings. The study found ammonia and isovaleric acid to be promising odor indicators. For this food waste mixture, offensive odors were emitted if the ammonia and isovaleric acid contents exceeded 360 mg/l and 940 mg/l, respectively.
    Matched MeSH terms: Solid Waste/analysis*
  11. Effects of pyrolysis temperature on the physicochemical properties of empty fruit bunch and rice husk biochars
    Claoston N, Samsuri AW, Ahmad Husni MH, Mohd Amran MS
    Waste Manag Res, 2014 Apr;32(4):331-9.
    PMID: 24643171 DOI: 10.1177/0734242X14525822
    Biochar has received great attention recently due to its potential to improve soil fertility and immobilize contaminants as well as serving as a way of carbon sequestration and therefore a possible carbon sink. In this work, a series of biochars were produced from empty fruit bunch (EFB) and rice husk (RH) by slow pyrolysis at different temperatures (350, 500, and 650°C) and their physicochemical properties were analysed. The results indicate that porosity, ash content, electrical conductivity (EC), and pH value of both EFB and RH biochars were increased with temperature; however, yield, cation exchange capacity (CEC), and H, C, and N content were decreased with increasing pyrolysis temperature. The Fourier transform IR spectra were similar for both RH and EFB biochars but the functional groups were more distinct in the EFB biochar spectra. There were reductions in the amount of functional groups as pyrolysis temperature increased especially for the EFB biochar. However, total acidity of the functional groups increased with pyrolysis temperature for both biochars.
    Matched MeSH terms: Solid Waste/analysis*
  12. Filth flies associated with municipal solid waste and impact of delay in cover soil application on adult filth fly emergence in a sanitary landfill in Pulau Pinang, Malaysia
    Nurita AT, Hassan AA
    Bull. Entomol. Res., 2013 Jun;103(3):296-302.
    PMID: 23302698 DOI: 10.1017/S0007485312000703
    Two types of municipal solid waste (MSW), newly arrived and 2 weeks old, were sampled from a sanitary landfill in Pulau Pinang, Malaysia at a fortnightly interval and kept under field conditions for 2 weeks. A total of 480 kg of each type of MSW was sampled to study species composition and impact of delays in cover soil applications on filth fly emergence. Out of 960 kg of MSW sampled, 9.2 ± 0.5 flies emerged per kilogram. Weekly adult fly emergence rates of newly arrived and 2-week-old waste did not differ significantly and MSW remained suitable for fly breeding for up to 1 month. Eight species of flies emerged from the MSW: namely, Musca domestica, Musca sorbens, Synthesiomyia nudiseta, Hydrotaea chalcogaster, Chrysomya megacephala, Lucilia cuprina, Hemipyrellia ligurriens and Sarcophaga sp. Newly arrived waste was determined to be the main source for M. domestica, C. megacephala and L. cuprina in the landfill owing to significantly higher mean emergence compared with 2-week-old waste. Musca sorbens was found in newly arrived waste but not in 2-week-old waste, suggesting that the species was able to survive transportation to landfill but unable to survive landfill conditions. Hemipyrellia ligurriens, H. chalcogaster and S. nudiseta were not imported into the landfill with MSW and pre-existing flies in and around the landfill itself may be their source. The results show that landfills can be a major source of fly breeding if cover soil or temporary cover is not applied daily or on a regular schedule.
    Matched MeSH terms: Solid Waste*
  13. Fulltext Compost and crude humic substances produced from selected wastes and their effects on Zea mays L. nutrient uptake and growth
    Palanivell P, Susilawati K, Ahmed OH, Majid NM
    ScientificWorldJournal, 2013;2013:276235.
    PMID: 24319353 DOI: 10.1155/2013/276235
    Production of agriculture and timber commodities leads generation of enormous quantity of wastes. Improper disposal of these agroindustrial wastes pollutes the environment. This problem could be reduced by adding value to them. Therefore, a study was carried out to analyse and compare the nutrients content of RS, RH, SD, and EFB of composts and crude humic substances; furthermore, their effect on growth, dry matter production, and nutrient uptake for Zea mays L., and selected soil chemical properties were evaluated. Standard procedures were used to analyze humic acids (HA), crude fulvic acids (CFA), crude humin (CH), soil, dry matter production and nutrient uptake. Sawdust and RS compost matured at 42 and 47 days, respectively, while RH and EFB composts were less matured at 49th day of composting. Rice straw compost had higher ash, N, P, CEC, HA, K, and Fe contents with lower organic matter, total organic carbon, and C/N and C/P ratios. The HA of sawdust compost showed higher carbon, carboxylic, K, and Ca contents compared to those of RS, RH, and EFB. Crude FA of RS compost showed highest pH, total K, Ca, Mg, and Na contents. Crude humin from RS compost had higher contents of ash, N, P, and CEC. Rice straw was superior in compost, CFA, and CH, while sawdust compost was superior in HA. Application of sawdust compost significantly increased maize plants' diameter, height, dry matter production, N, P, and cations uptake. It also reduced N, P, and K based chemical fertilizer use by 90%. Application of CH and the composts evaluated in this study could be used as an alternative for chemical fertilizers in maize cultivation.
    Matched MeSH terms: Solid Waste/analysis*
  14. Conceptual framework for the study of food waste generation and prevention in the hospitality sector
    Papargyropoulou E, Wright N, Lozano R, Steinberger J, Padfield R, Ujang Z
    Waste Manag, 2016 Mar;49:326-336.
    PMID: 26803473 DOI: 10.1016/j.wasman.2016.01.017
    Food waste has significant detrimental economic, environmental and social impacts. The magnitude and complexity of the global food waste problem has brought it to the forefront of the environmental agenda; however, there has been little research on the patterns and drivers of food waste generation, especially outside the household. This is partially due to weaknesses in the methodological approaches used to understand such a complex problem. This paper proposes a novel conceptual framework to identify and explain the patterns and drivers of food waste generation in the hospitality sector, with the aim of identifying food waste prevention measures. This conceptual framework integrates data collection and analysis methods from ethnography and grounded theory, complemented with concepts and tools from industrial ecology for the analysis of quantitative data. A case study of food waste generation at a hotel restaurant in Malaysia is used as an example to illustrate how this conceptual framework can be applied. The conceptual framework links the biophysical and economic flows of food provisioning and waste generation, with the social and cultural practices associated with food preparation and consumption. The case study demonstrates that food waste is intrinsically linked to the way we provision and consume food, the material and socio-cultural context of food consumption and food waste generation. Food provisioning, food consumption and food waste generation should be studied together in order to fully understand how, where and most importantly why food waste is generated. This understanding will then enable to draw detailed, case specific food waste prevention plans addressing the material and socio-economic aspects of food waste generation.
    Matched MeSH terms: Solid Waste/analysis*
  15. Solid waste forecasting using modified ANFIS modeling
    Younes MK, Nopiah ZM, Basri NE, Basri H, Abushammala MF, K N A M
    J Air Waste Manag Assoc, 2015 Oct;65(10):1229-38.
    PMID: 26223583 DOI: 10.1080/10962247.2015.1075919
    Solid waste prediction is crucial for sustainable solid waste management. Usually, accurate waste generation record is challenge in developing countries which complicates the modelling process. Solid waste generation is related to demographic, economic, and social factors. However, these factors are highly varied due to population and economy growths. The objective of this research is to determine the most influencing demographic and economic factors that affect solid waste generation using systematic approach, and then develop a model to forecast solid waste generation using a modified Adaptive Neural Inference System (MANFIS). The model evaluation was performed using Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and the coefficient of determination (R²). The results show that the best input variables are people age groups 0-14, 15-64, and people above 65 years, and the best model structure is 3 triangular fuzzy membership functions and 27 fuzzy rules. The model has been validated using testing data and the resulted training RMSE, MAE and R² were 0.2678, 0.045 and 0.99, respectively, while for testing phase RMSE =3.986, MAE = 0.673 and R² = 0.98.
    Matched MeSH terms: Solid Waste/analysis*
  16. Waste to biodiesel: A preliminary assessment for Saudi Arabia
    Rehan M, Gardy J, Demirbas A, Rashid U, Budzianowski WM, Pant D, et al.
    Bioresour Technol, 2018 Feb;250:17-25.
    PMID: 29153646 DOI: 10.1016/j.biortech.2017.11.024
    This study presents a preliminary assessment of biodiesel production from waste sources available in the Kingdom of Saudi Arabia (KSA) for energy generation and solution for waste disposal issues. A case study was developed under three different scenarios: (S1) KSA population only in 2017, (S2) KSA population and pilgrims in 2017, and (S3) KSA population and pilgrims by 2030 using the fat fraction of the municipal solid waste. It was estimated that S1, S2, and S3 scenarios could produce around 1.08, 1.10 and 1.41 million tons of biodiesel with the energy potential of 43423, 43949 and 56493 TJ respectively. Furthermore, annual savings of US $55.89, 56.56 and 72.71 million can be generated from landfill diversion of food waste and added to the country's economy. However, there are challenges in commercialization of waste to biodiesel facilities in KSA, including waste collection and separation, impurities, reactor design and biodiesel quality.
    Matched MeSH terms: Solid Waste
  17. Anaerobic digestion of lignocellulosic waste: Environmental impact and economic assessment
    Fan YV, Klemeš JJ, Perry S, Lee CT
    J Environ Manage, 2019 Feb 01;231:352-363.
    PMID: 30366314 DOI: 10.1016/j.jenvman.2018.10.020
    Lignocellulosic waste (LW) is abundant in availability and is one of the suitable substrates for anaerobic digestion (AD). However, it is a complex solid substrate matrix that hinders the hydrolysis stage of anaerobic digestion. This study assessed various pre-treatment and post-treatments of lignocellulosic waste for anaerobic digestion benefiting from advanced P-graph and GaBi software (Thinkstep, Germany) from the perspective of cost and environmental performances (global warming potential, human toxicity, ozone depletion potential, particulate matter, photochemical oxidant creation, acidification and eutrophication potential). CaO pre-treatment (P4), H2S removal with membrane separation post-treatment (HSR MS) and without the composting of digestate is identified as the cost-optimal pathway. The biological (P7- Enzyme, P8- Microbial Consortium) and physical (P1- Grinding, P2- Steam Explosion, P3- Water Vapour) pre-treatments alternatives have lower environmental impacts than chemical pre-treatments (P4- CaO, P5- NaOH, P6- H2SO4) however they are not part of the near cost optimal solutions. For post-treatment, the near cost optimal alternatives are H2S removal with organic physical scrubbing (HSR OPS) and H2S removal with amine scrubbing (HSR AS). HSR AS has a better performance in the overall environmental impacts followed by HSR MS and HSR OPS. In general, the suggested cost-optimal solution is still having relatively lower environmental impacts and feasible for implementation (cost effective). There is very complicated to find a universal AD solution. Different scenarios (the type of substrate, the scale, product demand, policies) have different constraints and consequently solutions. The trade-offs between cost and environment performances should be a future extension of this work.
    Matched MeSH terms: Solid Waste
  18. Intergovernmental relations for environmental governance: Cases of solid waste management and climate change in two Malaysian States
    Puppim de Oliveira JA
    J Environ Manage, 2019 Mar 01;233:481-488.
    PMID: 30594113 DOI: 10.1016/j.jenvman.2018.11.097
    Institutions for environmental governance evolve differently across sectors. They also vary in the same sector when governments at two levels (national and subnational) have different political alignments. As the policy environment becomes more complex, with global problems like climate change, and politics more dividing, better coordination among various levels of government is a tough governance challenge. Scholars and practitioners need to realize how best to build institutions to bridge the various levels of government in different political environments and environmental sectors. This research analyzes the influence of intergovernmental relations in two environmental sectors in two localities with contrasting political alignments between two levels of government. It draws lessons from solid waste management and climate policy in two Malaysian states (Johor and Penang). In an evolving State and new policy arenas, when formal institutions for intergovernmental relations may not be effectively in place, politics play an even larger role through the discretionary power of federal and subnational authorities. An open political process can help with the engagement of different political groups and civil society to bring legitimacy, resources and efficiency to environmental management, if it is done with robust intergovernmental institutions; otherwise, intergovernmental relations can also become a tool for zero-sum games, cronyism and patrimonialism, which can undermine policies, and result in inefficiencies and ineffectiveness in environmental management.
    Matched MeSH terms: Solid Waste
  19. Effect of substitution of normal weight coarse aggregate with oil-palm-boiler clinker on properties of concrete
    Lee JC, Payam Shafigh, Hilmi Mahmud, Muhammad Aslam
    Sains Malaysiana, 2017;46:645-653.
    Oil-palm-boiler clinker (OPBC) is an agricultural solid waste sourced from the palm oil industry in tropical regions. This study investigates the use of OPBC as coarse aggregate instead of conventional coarse aggregates to produce a greener concrete, which will help in implementing sustainable construction practices by reducing the usage of raw materials. For this purpose, normal weight coarse aggregates was substituted with dry OPBC aggregates up to 75% (by volume) in a high strength normal weight concrete. The effectiveness of this substitution on the properties of the concrete such as workability, density, compressive strength, splitting tensile strength and modulus of elasticity was studied. The slump test results showed that using OPBC in dry condition reduced the workability of the concrete and therefore can be used up to 50% of the total volume of coarse aggregate. Concrete containing 50% OPBC can be considered as semi-lightweight concrete with high strength. Using OPBC in concrete reduced the splitting tensile strength and modulus of elasticity, however, the reduction was not significant.
    Matched MeSH terms: Solid Waste
  20. In situ transesterification of solid coconut waste in a packed bed reactor with CaO/PVA catalyst
    Talha NS, Sulaiman S
    Waste Manag, 2018 Aug;78:929-937.
    PMID: 32559988 DOI: 10.1016/j.wasman.2018.07.015
    In this study, solid coconut waste and CaO/PVA was used as raw material and catalyst respectively to produce biodiesel through in situ transesterification. Both, raw material and catalyst were packed in a packed bed reactor. The reaction was fixed for 3 h and the mixing was kept constant at 350 rpm. The highest biodiesel yield of 95% was obtained at reaction temperature of 61 °C with catalyst loading (CaO/PVA) of 2.29 wt% and methanol to solid ratio of 12:1. CaO-waste derived catalyst has been successfully proven to be utilized as heterogeneous base catalyst for the production of biodiesel from solid coconut waste.
    Matched MeSH terms: Solid Waste
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links